By counting the number of crests that pass a point in a specific amount of time, one may determine the frequency of a waveform. Option a is correct.
What is the frequency of the sound?A sound pressure wave's frequency, also known as pitch, is the number of times it repeats itself every second.
The frequency of the sound is the inverse of the period. If the wavelength of a wave is short. The wave will indeed have a lower frequency. A longer wavelength denotes a lower frequency.
The frequency of a waveform is found by determining the number of crests passing a point in a given time.
Hence option a is correct.
To learn more about the frequency of the sound, refer to the link https://brainly.com/question/1435829.
#SPJ1
state two factors that affect current carrying capacity of an accumulator
The two factors that affect current carrying capacity of an accumulator will be accumulator size and ambient temperature
What is the function of the accumulator?Utilizing the compressible and decompressible properties of nitrogen gas, an accumulation vessel is used to store hydraulic pressure.
These key deciding elements are:
1. Accumulator Size: The current capacity increases as the circumference of the conductor increases.
2. Ambient Temperature: The greater the ambient temperature, the less heat is needed to raise the insulation's maximum operating temperature.
3. Accumulator identification:
4. Conditions for Installation:
Hence, the two factors that affect current carrying capacity of an accumulator will be accumulator size and ambient temperature
To learn more about the accumulator refer;
https://brainly.com/question/15907765
#SPJ1
Compare/Contrast the Jovian planets in terms of their size (vs. Earth), composition (elemental), location (relative to the Sun), major moons (name a few), orbital period (Earth years), and rotational period (Earth time).
a) Jupiter
b) Saturn
c) Uranus
d) Neptune
Jupiter is the largest. the closest Jovian planet to the sun is Jupiter and most farthest is Neptune. moons of Jupiter are Europa, lo, Ganymede, etc. Saturn has an orbital period equal to 29 earth years. Uranus's rotational period is equal to 17h 14m.
In terms of size-
Earth- 6,371 kmJupiter- it is 11 times larger than the earth in terms of diameterSaturn- it is the next largest planet. Saturn is 9 times bigger than the earth. Uranus- it is roughly 4 times larger than the earth. Neptune-it is roughly 4 times larger than the earth same as Uranus.In terms of location-
Jovian planets are generally farther from the sun while terrestrial plants are closer to the sun. therefore Jupiter, Saturn, Uranus, and Neptune are away from the sun whole earth is closer to the sun.
In terms of moons-
Jovian planets have more moons as compared to earth. Jupiter has 53 moon, Uranus has 27 Miranda, ariel ,Oberon) while the earth has one moon.
In terms of the orbital period-
Jovian planets have a longer orbital period than earth as they are further from the sun.
In terms of the rotational period-
The rotational period of the Jovian planet is approximately 10 to 17 hours.
learn more about the Jovian planet here:
https://brainly.com/question/14450796
#SPJ10
What is the spring constant if 85.0J of energy is stored when a spring is compressed 0.400m?
A.1060N/m
B.212N/m
C.531N/m
D.425N/m
Answer:
212N/m
Explanation:
First of all, what is spring constant
As per Hooke's law, The restoring force applied by the spring is proportional to the change in length, and restoring force is directed towards the equilibrium position. The proportionality constant is called the spring constant and it is a measure of the stiffness of the spring. So as Hooke's law
F = -Kx
Where
F -> Restoring force
K-> Spring constant
x -> change in length
the negative sign indicates it is acting toward the center
Rearranging this for the Spring constant, Spring constant formula is given by
k = Fx
Unit of Spring Constant is Newton/meter
Jason while driving on Kukum highway at 70 m.s – 1 seeing the traffic light turn red, he applies the brake and comes to rest in a time of 2 seconds. What is his deceleration?
Answer:
35 m/s^2
Explanation:
Decceleration = change in velocity / change in time
= ( 70 m/s ) / 2 seconds = 35 m/s^2
DEcceleration = 35 m/s^2
Jason's speed changes by - 35 m/s^2
A 0.15-kilogram baseball moving at 43 meters per second was stopped by the catcher’s glove in 0.050 seconds. What was the average force exerted on the ball by the glove? Round your answer to two significant figures.
The average force exerted on the ball by the glove will be 129 N.
What is force?Force is defined as the push or pulls applied to the body. Sometimes it is used to change the shape, size, and direction of the body. Force is defined as the product of mass and acceleration. Its unit is Newton.
Given data;
Mass,(m)=0.15-kilogram
Initial speed,u=43 meters per second
Time period,t= 0.050 seconds
Average force exerted,F=?
The average force exerted on the ball by the glove is;
[tex]\rm F = m\frac{v-u}{t} \\\\ F=0.15( \frac{43-0}{0.050} )\\\\ F=129 N[/tex]
Hence, the average force exerted on the ball by the glove will be 129 N.
To learn more about the force refer to the link;
https://brainly.com/question/26115859
#SPJ1
How much heat is required to convert 12.0 g of ice at -10.0°C to steam at 100.0°C. Express your answer in joules, calories, and Btu.
The half-life of Iodine-131 is 8.0252 days. If 14.2 grams of I-131 is released in Japan and takes 31.8 days to travel across the Pacific, how much I-131 will be left by the time it reaches California?
Answer:
Explanation:
Half-life problems are modeled as exponential equations. The half-life formula is [tex]P=P_o\left (\dfrac{1}{2} \right)^{\frac{t}{k}}[/tex] where [tex]P_o[/tex] is the initial amount, [tex]k[/tex] is the length of the half-life, [tex]t[/tex] is the amount of time that has elapsed since the initial measurement was taken, and [tex]P[/tex] is the amount that remains at time [tex]t[/tex].
[tex]P=14.2\left (\dfrac{1}{2} \right)^{\frac{t}{8.0252}}[/tex]
Deriving the half-life formula
If one forgets the half-life formula, one can derive an equivalent equation by recalling the basic an exponential equation, [tex]y=a b^{t}[/tex], where [tex]t[/tex] is still the amount of time, and [tex]y[/tex] is the amount remaining at time [tex]t[/tex]. The constants a and b can be solved for as follows:
Knowing that amount initially is 14.2g, we let this be time zero:
[tex]y=a b^{t}[/tex]
[tex](14.2)=ab^{(0)}[/tex]
[tex]14.2=a *1[/tex]
[tex]14.2=a[/tex]
So, [tex]a=14.2[/tex], which represents out initial amount of the substance, and our equation becomes: [tex]y=14.2 b^{t}[/tex]
Knowing that the "half-life" is 8.0252 days (note that the unit here is "days", so times for all future uses of this equation must be in "days"), we know that the amount remaining after that time will be one-half of what we started with:
[tex]\left(\frac{1}{2} *14.2 \right)=14.2 b^{(8.0252)}[/tex]
[tex]\dfrac{7.1}{14.2}=\dfrac{14.2 b^{8.0252}}{14.2}[/tex]
[tex]0.5=b^{8.0252}[/tex]
[tex]\sqrt[8.0252]{\frac{1}{2}}=\sqrt[8.0252]{b^{8.0252}}[/tex]
[tex]\sqrt[8.0252]{\frac{1}{2}}=b[/tex]
Recalling exponent properties, one could find that [tex]\left ( \frac{1}{2} \right )^{\frac{1}{8.0252}}=b[/tex], which will give the equation identical to the half-life formula. However, recalling this trivia about exponent properties is not necessary to solve this problem. One can just evaluate the radical in a calculator:
[tex]b=0.9172535661...[/tex]
Using this decimal approximation has advantages (don't have to remember the half-life formula & don't have to remember as many exponent properties), but one minor disadvantage (need to keep more decimal places to reduce rounding error).
So, our general equation derived from the basic exponential function is:
[tex]y=14.2* (0.9172535661)^t[/tex] or [tex]y=14.2*(0.5)^{\frac{t}{8.0252}}[/tex] where y represents the amount remaining at time t.
Solving for the amount remaining
With the equation set up, substitute the amount of time it takes to cross the Pacific to solve for the amount remaining:
[tex]y=14.2* (0.9172535661)^{(31.8)}[/tex] [tex]y=14.2*(0.5)^{\frac{(31.8)}{8.0252}}[/tex]
[tex]y=14.2* 0.0641450581[/tex] [tex]y=14.2*(0.5)^{3.962518068}[/tex]
[tex]y=0.9108598257[/tex] [tex]y=14.2* 0.0641450581[/tex]
[tex]y=0.9108598257[/tex]
Since both the initial amount of Iodine, and the amount of time were given to 3 significant figures, the amount remaining after 31.8days is 0.911g.
Honey bees beat their wings, making a buzzing sound at a frequency of 2.3 × 102 hertz. What is the period of a bee's wing beat?
Can you put this image back together? Type the correct order of letters below.
Answer:
CABD
.....................
The image is cut and jumbled and placed into different places, so the correct order of the image that it can be back together is CABD.
What is an image?A specific piece of something is an image. It can provide information to the optical system in two dimensions, three components, or in another way. An item that mimics a subject, such as a picture or other two-dimensional image, might be considered an image. An image in the context of signal analysis is a dispersed color amplitude.
A graphical image need not make use of the complete visual system. A common illustration of this is a grayscale image, which does not employ color, but instead relies on the visual game's sensitivity to brightness across all wavelengths. Even if it doesn't make proper use of the visual system, a black-and-white and white visual depiction of something is nonetheless an image.
To know more about the image:
https://brainly.com/question/25029470
#SPJ2
As the pressure on a sample of gas increases, the volume of the sample
Decrease
Stays the same
Increase
Answer:
decreases
Explanation:
because all the particles are wanting to say together and hit each other in a small area
Which of the following statements is false?
A Heat is a form of energy while temperature is a measure of degree of hotness
B Heart and temperature are linearly related
C Heat can be measured by physical changes due to change in temperature
D Temperature can be measured by physical changes due to change in heat
d. is wrong...the temperature cannot be measured due to physical changes
A certain spring has a spring constant k1 = 660 N/m as the spring is stretched from x = 0 to x1 = 35 cm. The spring constant then changes to k2 = 250 N/m as the spring is stretched to x2 = 65 cm. From x2 = 65 cm to x3 = 89 cm the spring force is constant at F3 = 105 N.
Write an equation for the work done in stretching the spring from x1 to x2.
Calculate the work done, in joules, in stretching the spring from x1 to x2.
Calculate the work, in joules, necessary to stretch the spring from x = 0 to x3.
(a) The equation for the work done in stretching the spring from x1 to x2 is ¹/₂K₂Δx².
(b) The work done, in stretching the spring from x1 to x2 is 11.25 J.
(c) The work, necessary to stretch the spring from x = 0 to x3 is 64.28 J.
Work done in the springThe work done in stretching the spring is calculated as follows;
W = ¹/₂kx²
W(1 to 2) = ¹/₂K₂Δx²
where;
k is spring constantΔx is compression of the springW(1 to 2) = ¹/₂(250)(0.65 - 0.35)²
W(1 to 2) = 11.25 J
W(0 to 3) = ¹/₂k₁x₁² + ¹/₂k₂x₂² + ¹/₂F₃x₃
where;
k₁ is first spring constantk₂ is second spring constantF₃ is third force applied to the springW(0 to 3) = ¹/₂(660)(0.35)² + ¹/₂(250)(0.65 - 0.35)² + ¹/₂(105)(0.89 - 0.65)
W(0 to 3) = 64.28 J
Learn more about work done here: https://brainly.com/question/25573309
#SPJ1
Two very large charged parallel metal plates are 13.0 cm c m apart and produce a uniform electric field of 3.40×106 N/C N / C between them. A proton is fired perpendicular to these plates with an initial speed 5.20 km/s k m / s , starting at the middle of the negative plate and going toward the positive plate.
The work done by the electric field on the proton when it reaches the positive plate willl be 9.1 ×10⁻¹⁵ J.
What is an electric field?A physical field that surrounds electrically charged particles and exerts a force on all other charged particles in the field, either attracting or repelling them, is referred to as an electric field,
The electric field formula is as follows:
E = F /Q
Where,
The electric field is denoted by the letter E.
F is a powerful letter.
The charge is Q.
The potential difference between the plate;
[tex]\rm V = E d \\\\ V = 3.40 \times 10^6 \times 0.13 \ m \\\\ V= 442000 \\\\ V = 4.42 \times 10^5 \ v[/tex]
Force on the charged particle ;
[tex]\rm F = qV \\\\ F= 1.6 \times 10^{-19} \times 4.42 \times 10^ 5 \\\\\ F = 7.0 \times 10^{-14} \ N[/tex]
Work done in order to move the charge;
[tex]\rm W = F \times d \\\\ W= 7.0 \times 10^{-14} \ N \times 0.13 m \\\\ W=9.1 \times 10^{-15} \ J[/tex]
Hence, the work done by the electric field on the proton when it reaches the positive plate willl be 9.1 ×10⁻¹⁵ J.
The complete question is attached in attachments.
To learn more about the electric field refer to the link;
https://brainly.com/question/26690770
#SPJ1
Grains (pounds)
Nonfat/1% milk (gallons)
Poultry (pounds)
Seafood (pounds)
12
Vegetables (pounds)
271
1
Yogurt (pounds)
Fats and oils (pounds)
55
24
52
Soft drinks (gallons)
123
150
Sugars (pounds)
Source: U.S. Department of Agriculture, Hope Health Letter, April 1999
135
2
34
More people are:
What assumption can be made about the eating habits over the years?
6
63
15
320
4
67
O
A. becoming vegetarians
OB. eating more beef than chicken
OC. consuming whole milk dairy products
D. trying to eat healthier foods
E. eliminating soft drinks from their diets
Answer:
D. trying to eat healthier foods
Explanation:
In a recent study of how mice negotiate turns, the mice ran around a circular 90∘ turn on a track with a radius of 0.10 m. The maximum speed measured for a mouse (mass = 18.5 g) running around this turn was 1.39 m/s. Part A What is the minimum coefficient of friction between the track and the mouse's feet that would allow a turn at this speed?
The minimum coefficient of friction between the track and the mouse's feet that would allow a turn at this speed without sleeping is 1.97.
Minimum coefficient of frictionThe minimum coefficient of friction is calculated as follows;
F = μmg = mac
μmg = mac
where;
ac is centripetal accelerationμg = ac
μg = v²/r
μ = v²/rg
where;
μ is the minimum coefficient of frictionv is velocityr is radius of the pathg is acceleration due to gravityμ = (1.39²)/(0.1 x 9.8)
μ = 1.97
Thus, the minimum coefficient of friction between the track and the mouse's feet that would allow a turn at this speed without sleeping is 1.97.
Learn more about minimum coefficient of friction here: https://brainly.com/question/23971360
#SPJ1
A 2100-W hair dryer is operated on a 120-V
circuit for 12 min. If electricity
costs $0.25/kWh, what was the cost (in
cents) of using the blow dryer? Round final
answer to the nearest cent.
Answer:
cost=$15
Explanation:
given;
P= 2100 W
t= 12'= 720 sec=0.2h
V= 120 V
required;
Energy?
cost?
solution;
Energy(kWh) = power*time(in hour)
E=2100*0.2= 420 kWh
cost= 420 kWh* $0.25/kWh
cost= $15
since blow dryer use 120-V
which of the following is NOT a type of scientist?
A. Geologist
B. Meteorologist
C. Botanist
D. Cryptologist
A cryptologist is not a type of scientist. The correct answer is a cryptologist and the correct option is (D).
Experts in the study of methods for secure communication and data security through encryption and decryption are known as cryptologists.
Even though they are considered scientists in the broadest sense, they are not typically classed with the other natural scientists (geologists, meteorologists, and botanists) stated in the alternatives.
Due to its emphasis on the methods and mathematical principles used in encryption and decryption, cryptology is more intimately related to computer science and mathematics.
Therefore, The correct answer is a cryptologist and the correct option is (D).
To know more about the cryptologist:
https://brainly.com/question/24165734
#SPJ3
what is the frequency of the photon emitted by a hydrogen atom when its electron drops from the n = 6 to n = 4 energy level?
The frequency of the photon emitted by a hydrogen atom is [tex]26.2*10^-^4 hz[/tex]
What are Photons?A particle representing a quantum of light or other electromagnetic radiation. A photon carries energy proportional to the radiation frequency but has zero rest mass.
In the case of light, the frequency, symbolized by the Greek letter nu (ν), of any wave equals the speed of light, c, divided by the wavelength λ:
v = c/λ
Since the wavelength λ is in the bottom of the fraction, the frequency is inversely proportional to the wavelength.
v = c/λ
v= [tex]\frac{3*10^8}{434*10^-^9} = 6.91*10^1^4 Hz[/tex]
By using Rydberg's formula,
1/λ [tex]= Rz^2(\frac{1}{n_1^2} - \frac{1}{n_2^2})[/tex]
1/λ = [tex]109677 *(\frac{1}{4^2} - \frac{1}{6^2}) = 3808.22 cm^-^1[/tex]
λ = [tex]26.2*10^-^4 hz[/tex]
[tex]26.2*10^-^4 hz[/tex] is frequency of the photon emitted by a hydrogen atom.
Learn more about Photons here:https://brainly.com/question/20912241
#SPJ1
A cannonball is shot horizontally off a high castle wall at 47.4 m/s. What is the magnitude of the cannonball's velocity after 1.23 s? (Ignore direction)
The magnitude of the cannonball's velocity after 1.23 s will be 59.46 m/sec.
What is velocity?The change of distance with respect to time is defined as speed. Speed is a scalar quantity. It is a time-based component. Its unit is m/sec.
The given data in the problem is
u is the initial velocity of canonball= 47.4 m/sec
g is the acceleration of free fall = 9.81 m/sec²
v is the velocity after 1.23 s
According to Newton's first equation of motion,
[tex]\rm v=u +gt \\\\ v= 47.4 \ m/sec + 9.81 \ m/sec^2 \times 1.23 sec \\\\\ v=59.46 \ m/sec[/tex]
Hence, the magnitude of the cannonball's velocity after 1.23 s will be 59.46 m/sec.
To learn more about the velocity, refer to the link: https://brainly.com/question/862972.
#SPJ1
Find the magnitude of this
vector:
The magnitude of the vector is 34.092 N
What is resultant?The resultant is the square root of sum of square of the vector component of x and y direction.
R =√ [(Nx)² +(Ny)²]
Given is the vector with horizontal length of the vector = -28.7 m and the vertical length of the vector = 18.4 m
The resultant will be
R =√ [(-28.7)² +(18.4)²]
R = 34.092 N
Thus, the magnitude of the vector is 34.092 N.
Learn more about resultant.
https://brainly.com/question/12784665
#SPJ1
DON'T ADD LINKS!
Imagine that a single cell below goes through four cell divisions.
How many cells are produced? To find out, draw the parent cell
and cells present after each division. Then write the number of
cells in the space below each drawing. (Hint: the number of cells
doubles with each division.)
Two, four, eight and sixteen cells are produced from first, second, third and fourth cell division respectively.
How many cells are produced?When the body cell passes through cell division process, it divides into two daughter cells. In the second cell division, two cells divides into four cells. In the third cell division, the four cells divides into eight cells. In the fourth cell division, the eight cells divides and sixteen cells are produced.
So we can conclude that two, four, eight and sixteen cells are produced from first, second, third and fourth cell division respectively.
Learn more about cell division here: https://brainly.com/question/796780
#SPJ1
A skateboarder starts from rest and maintains a constant acceleration of 0.50 m/s² for 8.4 s. What is the rider's displacement during this time
meters
Answer:
4.2m/s
Explanation:
0.50x8.4=4.2m/s
What is matter ?
.......................
Answer:
Something which occupies space and have mass.
A 0.6 kg ball moving to the right at 12 m/s makes a head on elastic collision with a 0.3 kg ball traveling to the left at 3 m/s.
The velocity of the 0.6 kg ball initially after the collision is
Most of the bending of light in the eye is done at the air-cornea interface. By what angle (θcornea) is the beam of light shown in Figure deviated as it passes from air to the cornea if the incident angle is θi = 23.6°? The refractive index of air is nair = 1.00, the refractive index of the cornea is ncornea = 1.38. Explain why θcornea< θi?
The angle (θcornea) when light passes from air to cornea is 16.86°
What is Snell's law?It states that the ratio of sine of angle of incidence and angle of refraction is equal to the refractive index of second medium to the first medium.
sini/sinr =n₂ / n₁
Most of the bending of light in the eye is done at the air-cornea interface. The beam of light deviated as it passes from air to the cornea if the incident angle is θi = 23.6°.
Given the angle of incidence i = 23.6°, refractive index of air n₁ =1, refractive index of cornea n₂ = 1.38, then the angle of refraction at cornea is
sinr = sini x (n₁/n₂)
Plug the values, we get
sinr = sin23.6 x (1/1.38)
sinr = 16.86°
The angle of refraction is less than angle of incidence due to refraction.
Thus, the angle (θcornea) when light passes from air to cornea is 16.86°
Learn more about Snell's law.
https://brainly.com/question/10112549
#SPJ1
Imagine that you're doing an experiment to determine how the running speed of a hamster depends on the weight of the hamster when plotting your data what variable should be on the y-axis
The variable on the y-axis should be the running speed of hamsters since it is the dependent variable.
What is the dependent variable?The dependent variable is the variable whose value fluctuates depending on other variables in an experiment.
In this case, the running speed is the dependent variable because it depends on the weight of the hamster.
The dependent variable is generally graphed on the Y axes, whereas the independent variable is graphed on the X-axes.
In conclusion, the variable on the y-axis should be the running speed of hamsters since it is the dependent variable.
Learn more about the dependent variable here:
https://brainly.com/question/25223322
#SPJ1
. A vertical electric field is set up in space to compensate for the gravitational force on a point charge. What is the required magnitude and direction of the field when the point charge is: (a) an electron? (b) a proton? Comment on the obtained values.
(a) The required magnitude of the electric field when the point charge is an electron is 5.57 x 10⁻¹¹ N/C.
(b) The required magnitude of the electric field when the point charge is an proton is 1.02 x 10⁻⁷ N/C.
Magnitude of electric fieldThe magnitude of electric field is given by the following equation.
F = qE
But F = mg
mg = qE
E = mg/q
where;
E is the electric fieldm is mass of the particleg is acceleration due to gravityq is charge of the particleFor an electronE = (9.11 x 10⁻³¹ x 9.8)/(1.602 x 10⁻¹⁹)
E = 5.57 x 10⁻¹¹ N/C
For protonE = (1.67 x 10⁻²⁷ x 9.8)/(1.602 x 10⁻¹⁹)
E = 1.02 x 10⁻⁷ N/C
Thus, the required vertical electric field is greater when the charge is proton.
Learn more about electric field here: https://brainly.com/question/14372859
#SPJ1
Need help with this question!
Answer:(note that values will be on top in small)
cobalt :- 60Co
potassium :- 40K
neon :- 24Ne
lead :- 208Pb
It takes a minimum distance of 76.50 m to stop a car moving at 15.0 m/s by applying the brakes (without locking the wheels). Assume that the same frictional forces apply and find the minimum stopping distance when the car is moving at 32.0 m/s.
The minimum stopping distance when the car is moving at 32.0 m/s is 348.3 m.
Acceleration of the car
The acceleration of the car before stopping at the given distance is calculated as follows;
v² = u² + 2as
when the car stops, v = 0
0 = u² + 2as
0 = 15² + 2(76.5)a
0 = 225 + 153a
-a = 225/153
a = - 1.47 m/s²
Distance traveled when the speed is 32 m/sIf the same force is applied, then acceleration is constant.
v² = u² + 2as
0 = 32² + 2(-1.47)s
2.94s = 1024
s = 348.3 m
Learn more about distance here: https://brainly.com/question/4931057
#SPJ1
Name the inertia in the following cases.
A passenger jumping out of a moving bus falls forward.
Answer:
inertia of motion
Explanation:
it's because when a passenger is jumping from a bus his/her body is in motion after falling in a road he/she remains or tends to remain in the state of motion that is the reason
