The glucometer applies a potential difference of 0.90 volts across a blood sample. The glucose concentration of the blood sample is 0.98 grams/litre. Determine the current in the blood sample. ​

Answers

Answer 1

The amount of current in the blood sample is determined as 0.12 A.

Current in the blood

The current in the blood is calculated by applying Ohm's law as shown below;

V = IR

where;

V is voltageI is currentR is resistance

From resistivity chart corresponding to 0.98 g/L, resistance, R = 7.4

I = V/R

I = 0.9 /7.4

I = 0.12 A

Learn more about current here: https://brainly.com/question/25537936

#SPJ1


Related Questions

Mark is diving to the bottom of a pool to pick up a penny. Which of the
following describes the fluid pressure on his ears as he dives?
A. The fluid pressure increases as he dives.
B. After he dives, the fluid pressure increases and then decreases as
he dives deeper.
C. The fluid pressure on his ears doesn't change as he dives.
D. The fluid pressure decreases as he dives.

Answers

Answer:

A

Explanation:

As you go deeper, the pressure increases because the water is going farther away from the air and atmosphere

which has more KE, a 2 g bee flying at 1 m/s, or a 1 g wasp flying at 2 m/s

Answers

Answer:

the 1 gram wasp

Explanation:

To start off with this problem, write down every piece of information and do neccessary conversions.

mass of bee = 2 grams = 0.002 kg

speed of bee = 1 m/s

mass of wasp = 1 gram = 0.001 kg

speed of wasp = 2 m/s

now, we will use the kinetic energy formula and compare the answers

KE BEE = 0.5 (0.002 kg)(1 m/s)^2 = 0.001 Joules

KE WASP = 0.5(0.001 kg)(2 m/s)^2 = 0.002 Joules

0.002 J > 0.001 J

Consider the baby being weighed in Figure 4.25.

Figure 4.25

(a) What is the mass of the child and basket if a scale reading of 104 N is observed?
kg
(b) What is the tension T in the cord attaching the child to the scale?
N
(c) What is the tension T' in the cord attaching the scale to the ceiling, if the scale has a mass of 0.500 kg?
N
(d) Draw a sketch of the situation indicating the system of interest used to solve each part. The masses of the cords are negligible. (Do this on paper. Your instructor may ask you to turn in this work.)

Answers

The mass and tension due to the system are as follows:

The mass of the child and scale = 10.6 kgThe tension T, in the cord attaching the child to the scale = 104N The tension T', in the cord attaching the scale to the ceiling T' = 108.9 N

What is tension?

Tension is a type of pulling force due transmitted by means of a string or cable.

Force = mass * acceleration due to gravity

a) The mass of the child and scale = 104/9.81 = 10.6 kg

b) The tension T, in the cord attaching the child to the scale = scale reading = 104N

c) The tension T', in the cord attaching the scale to the ceiling = scale reading + weight of scale

T' = 104 + (0.5 * 9.81)

T' = 108.9 N

d) The sketch is attached in the picture

In conclusion, the tension is force exerted on the cord due to the weight of the scale and the baby.

Learn more about tension force at: https://brainly.com/question/24994188

#SPJ1

28. An electron with a speed of 4.0 x 10° m/s enters a uniform magnetic field of magnitude 0.040 T at an angle of 35 degrees to the magnetic field lines. The electron will follow a helical path. a) Determine the radius of the helical path. b) How far forward will the electron have moved after completing one circle?

Answers

Answer:

r= 1.09×10^-4

Explanation:

Given

V=speed=4.0×10^5 m/s

B= magnetic field= 0.040 T

©=angle= 35°

m= mass of electron= 9.11×10^-31

q= charge of electron= 1.60×10^-19

solution

qv×B= mv²/r

qvBsin©=mv²/r

qBsin©=mv/r

r=mv/qBsin©

r=9.11×10^-31× 4.0×10^5/1.064×10^-19×0.04T(sin35°)

r= 1.09×10^-4 m

a) r = 1.09 * [tex]10^{-4}[/tex] m

b) Distance travelled : 6.845 *  [tex]10^{-4}[/tex] m    

What is an electron ?

An electron is a  stable subatomic particle with a charge of negative electricity, found in all atoms and acting as the primary carrier of electricity in solids.

given

charge of electron : 1.6 * [tex]10^{-19}[/tex] C

mass of electron = 9.11 * [tex]10^{-31}[/tex] kg

v = 4.0 x 10 m/s

B =  0.040 T

theta = 35 degrees

since ,

force in magnetic field on electron = centripetal force

a) q(v*B) = m [tex]v^{2}[/tex] / r

q v B sin(theta) =  m [tex]v^{2}[/tex] / r

r =m v /q B sin(theta)

r =  9.11 * [tex]10^{-31}[/tex] * 4.0 x [tex]10^{5}[/tex]/ 1.6 * [tex]10^{-19}[/tex] sin (35)

r = 1.09 * [tex]10^{-4}[/tex] m

b)  far forward will the electron have moved after completing one circle will be equal to circumference of the circle = 2πr

 = 2 * 3.14 * 1.09 * [tex]10^{-4}[/tex] m  = 6.845 *  [tex]10^{-4}[/tex] m  

learn more about electron  

https://brainly.com/question/1255220?referrer=searchResults

#SPJ2

A piece of steel expands 10 cm when ur is heated from 20 to 50 degrees Celsius. How much would it expand if it was heated from 20 to 60 degrees Celsius

Answers

The steel would expand by 4. 8 * 10^-3 cm

How to determine the linear expansion

The change in length  ΔL is proportional to length  L. It is dependent on the temperature, substance, and length.

Using the formula:

ΔL= α LΔT

where  ΔL  is the change in length  L = 10cm

ΔT  is the change in temperature = 60° - 20° = 40° C

 α  is the coefficient of linear expansion = 1.2 x 10^-5 °C

Substitute into the formula

ΔL = [tex]1.2 * 10^-5 * 10 * 40[/tex]

ΔL = [tex]4.8 * 10 ^-3[/tex] cm

Therefore, the steel would expand by 4. 8 * 10^-3 cm

Learn more about linear expansion here:

https://brainly.com/question/14325928

#SPJ1

The road from city A to city B is described by a car with Vm 40 km / h. When the car turns (from B to A) the average speed is 60 km / h. Find the average round trip speed.​

Answers

Answer:

i think the answer is 20.......

There are several ways to model a compound one type of model is shown ?what is the chemical formula for the molecule modeled?

Answers

The is organic compound with the correct chemical formula C4H9O2.

What is a model?

A model is a representation of reality. A model serves the purpose of prediction as well as explanation.

Looking at the model of the molecule we can see that it is the organic compound with the correct chemical formula C4H9O2. The molecule is shown in the image attached to this answer.

Missing parts:

There are several ways to model a compound. One type of model is shown.

What is the chemical formula for the molecule represented by the model?

CHO

C4H9O2

C4H8O

C3H8O2

Learn more about molecular models:https://brainly.com/question/156574?

#SPJ1

two rods one aluminum and one brass are is clamped at one end. At zero degrees celsius, the roads are each 50 cm long and separated by 0.024 CM at their unfastened ends. At what temperature will the rod just come into contact.

Answers

At 11.3°C the rod will just come into contact

Coefficient of linear expansion of aluminium [tex]\alpha_{Al}[/tex] = [tex]23*10^-^6[/tex] °[tex]C[/tex]

Coefficient of linear expansion of Brass [tex]\alpha_{B} =19*10^-^6[/tex] °[tex]C[/tex]

[tex]\alpha = \Delta{L}/Lo(T2-T1)[/tex]

For aluminium

[tex]\alpha_{Al} = \Delta{L}/Lo(T-0)[/tex]

[tex]\Delta{L_{1}} = (23*10^-^6*50*T)[/tex]

For Brass

[tex]\alphaB = \Delta{L_{2}/Lo(T-0)[/tex]

[tex]\Delta{L_{1} +\Delta{L_{2} =0.024cm(23*10^-^6*50*T)+(19*10-6*50*T) =0.024[/tex]

T =11.43 °C

Learn more about linear expansion here:

https://brainly.com/question/24215446

#SPJ10

Which of the following measurement is most significant?
A. 66.000cm
B. 0.00066cm
C. 6.600cm
D. 6.6cm

Answers

Option C. The measurement with the most significant number is 6.600 cm.

What is significant number?

Significant numbers are numbers that have significance or meaning and give more precise details about the value of the entire numbers.

66.000 cm ------> 2 significant numbers0.00066 cm -------> 2 significant numbers6.600 cm ----------> 4 significant numbers6.6 cm ---------------> 2 significant numbers

Thus, the measurement with the most significant number is 6.600 cm.

Learn more about significant numbers here: https://brainly.com/question/24491627

#SPJ1

Q3, A ball of mass 5.0 kg moving with a Velocity of 10.0 ms collides
with a 15.0 kg ball moves with a Velocity of 4 ms! If both balls
Stick together after Collision, Calculate their Common Velocity after Impact if they initially moves in The Same direction, and Opposite direction.

Answers

Answer:

Their common velocity after the collision will be 5.5m/s

Explanation:

look at the attachment above ☝️

During a NASCAR race a car goes 58 m/s around a curved section of track that has a radius of 260 m. What is the car's acceleration?

Answers

Answer:

12.9m/s^2

Explanation:

As, a=(v^2)/r

=(58^3)/260

=12.9

If the mass of the sun is 2x, at least one planet will fall into the habitable zone if I place a planet in orbits___, ____, ____, and ____, and all planets will orbit the sun successfully.
Pleas help this is Flvs comprehensive science class
6.01 please please help

Answers

So, the complete sentence is If the mass of the sun is 2x, at least one planet will fall into the habitable zone if I place a planet in orbits 84, 1, and 5, and all planets will orbit the sun successfully for the best conditions.

When the mass of the sun is larger, Earth moves around the sun at a faster pace and When the mass of the sun is smaller, Earth moves around the sun at a slower pace.

When Earth is closer to the sun, its orbit becomes faster and When Earth is farther from the sun, its orbit becomes slower.

When Earth is closer to the sun, there will be a hotter climate. A little movement that takes one closer to the sun could lead to a huge impact, as the sun is very hot.

So, it can be concluded that If the mass of the sun is 2x, at least one planet will fall into the habitable zone if I place a planet in orbits 84, 1, and 5, and all planets will orbit the sun successfully for the best conditions.

Learn more about Sun here:

https://brainly.com/question/15837114

#SPJ10

Two force of 20N and 40N act at a
Point and the angle between them is 50 degrees.
Find the resultant force
Find the direction using sine rule

Answers

R=√20²+40²+2.20.40 cos 50

R=55 N

R/sin β = F/sin α

55/sin 50 = 40/sin α

α = 33°

which items can be classified as matter? check all that apply?

-pencil
-oxygen
-idea
-horse
-dream

Answers

Answer:horse

Explanation:

A plane leaves with an acceleration of 6.34 m/s squared and takes 1.5 hours to stop. What is the speed of the plane? What was the distance it traveled?

Answers

The answer to this question is Initial velocity of plane will be 34236 m/s and 92437.2 Km is the distance travelled by it.

Three equation of motion are:-

v = u + ats = ut + (1/2)at²v² - u² = 2as

Where v is final velocity, u in initial velocity, s is the displacement by the object, a is the acceleration and t denotes the time.

In question we have given deceleration as 6.34 m/s² and time as 1.5 hour which is equal to 5400 seconds.

Applying equation 1 to find the initial speed of plane

v = u + at

0 = u + (-6.34 × 5400)   {v=0 as plane will stop after 5400 sec}

u =  6.34 × 5400

u = 34236 m/s

Initial velocity of plane is 34236 m/s

Applying equation 2 to find the displacement of plane in that time period

s = ut + (1/2)at²

s = ( 34236 × 5400 )  - ( (1/2) × 6.34 × 5400² )

s = 5400 × ( 34236 - ((1/2) × 6.34 × 5400) )

s = 5400 × ( 34236 - 17118 )

s = 5400 × 17118 metres

s = 5.4 × 17118 Km

s = 92437.2 Km

Distance travelled by plane is 92437.2 Km

So, the initial velocity of plane will be 34236 m/s and the displacement of plane in that time period will be 92437.2 Km.

Learn more about Motion here:

https://brainly.com/question/25951773

#SPJ10

A hollow cast-iron cylinder 4m long, 300mm outer diameter, and thickness of metal 50mm is subjected to a central load on the top when standing straight. The stress produced is 75000kN/m2. Assume Young's modulus for cast iron as 1.5x 108 kN/m^2 and find (i) magnitude of the load, (ii) longitudinal strain produced, and (iii) total decrease in length. ​

Answers

Here, the calculated Magnitude of the load P is 2945.2 kN, the Longitudinal strain produced is 0.0005 and the decrease in length is 2 mm.

Given,

Length, L = 4 m

Outer diameter, D = 300mm, D= 0.3 m

Thickness, t = 50 mm, t = 0.05 m

Stress produced, σ = 75000 kN/m²

Young's modulus for cast iron, E = 1.5 x 10⁸ kN/m²

Calculating the diameter of the cylinder,

Diameter of cylinder, d = (D) – (2t) = 0.3 –( 2 × 0.05)

d= 0.2 m

(i) Magnitude of the load P:

Using the relation, σ =P/A

P = σ × A = 75000 × π /4 (D² – d² )

P= 75000 × π/4 (0.3² – 0.2²)

P= 75000 × π/4 (0.09 – 0.04)

P = 2945.2 kN

Hence, Magnitude of the load P is 2945.2 kN.

(ii) Longitudinal strain produced, e :

Using the relation, Strain, (e) = stress/E

e= 75000/(1.5 x 10⁸)= 0.0005

Hence, the Longitudinal strain produced is 0.0005.

(iii)Total decrease in length, dL:

The total decrease in length can be calculated using the strain as the ratio of change in length to the original length is known as Strain.

Strain = change in length/original length

e= dL/L

0.0005 = dL/4

dL = 0.0005 × 4m = 0.002m=2mm

Hence,the decrease in length is 2 mm.

Learn more about Elasticity here:

https://brainly.com/question/15230910

#SPJ10

143°C = _____

416 K
-130 K
0 K
143 K

Answers

The answer is 0k because 143c equals nothing
416 k, the equation for k is C + 273

Suppose the ski patrol lowers a rescue sled carrying an injured skier, with a combined mass of 97.5 kg, down a 60.0-degree slope at a constant speed, as shown in the Figure. The coefficient of kinetic friction between the sled and snow is 0.100.
a) How much work, in joules, is done by friction as the sled moved 28 m along the hill?
b) How much work, in joules, is done by the rope on the sled this distance?
c) What is the work, in joules done by the gravitational force on the sled?
d) What is the net work done on the sled, in joules?

Answers

a. 1337.3 J work, in joules, is done by friction as the sled moved 28 m along the hill.

b.21,835 J work, in joules, is done by the rope on the sled this distance.

c. 23,170 J   the work, in joules done by the gravitational force on the sled d. The net work done on the sled, in joules is 43,670 J.

       

What is friction work?

The work done by friction is the force of friction times the distance traveled times the cosine of the angle between the friction force and displacement

a. How much work is done by friction as the sled moves 28m along the hill?

ans. We use the formula:

friction work = -µ.mg.dcosθ

  = -0.100 * 97.5 kg * 9.8 m/s² * 28 m * cos 60

= -1337.3 J

-1337.3 J work, in joules, is done by friction as the sled moved 28 m along the hill.

b. How much work is done by the rope on the sled in this distance?

We use the formula:

Rope work = -m.g.d(sinθ - µcosθ)

rope work = - 97.5 kg * 9.8 m/s² * 28 m (sin 60 – 0.100 * cos 60)

                     = 26,754 (0.816)

                     = 21,835 J

21,835 J work, in joules, is done by the rope on the sled this distance.

c.  What is the work done by the gravitational force on the sled?

By using  the formula:

Gravity work = mgdsinθ

                    = 97.5 kg * 9.8 m/s² * 28 m * sin 60

                    = 23,170 J

23,170 J   the work, in joules done by the gravitational force on the sled .

       

D. What is the total work done?

By adding all the values

work done =  -1337.3 + 21,835 + 23,170

                 = 43,670 J

The net work done on the sled, in joules is 43,670 J.

Learn more about friction work here:

https://brainly.com/question/14619763

#SPJ1

A ball of mass 500g is dropped from a height 1.5m . It rebounds the floor and reached the height 1.2m. Calculate the impulse given to the bàll by the floor​

Answers

The impulse given to the ball by the floor is 0.2865 kg.m/s.

What is impulse?

The change in momentum is equal to the product of impact force applied while colliding and time for that impact.

Impulse F. t = m (Vf -Vi)

where, Vf is the final velocity and Vi is the initial velocity.

A ball of mass 500g is dropped from a height 1.5m . It rebounds the floor and reached the height 1.2m.

The initial velocity u = √2x 9.81 x 1.5 = 5.425 m/s

The final velocity v = √2x 9.81 x 1.2 = 4.852 m/s

Substitute the values into the expression, we get

Impulse = m(v- u)

Impulse=0.5 x (4.852- 5.425 )

Impulse = - 0.2865 kg.m/s

Thus, the magnitude of impulse given to the ball by the floor is 0.2865 kg.m/s.

Learn more about impulse.

https://brainly.com/question/16980676

#SPJ1

Taking the density of air to be 1.29 kg/m3, what is the magnitude of the angular momentum (in kg · m2/s) of a cubic meter of air moving with a wind speed of 73.0 mi/h in a hurricane? Assume the air is 51.2 km from the center of the hurricane "eye."

Answers

The magnitude of the angular momentum of air will be 4.128 x 10^(-3) kg·m^2/s

The rotating equivalent of linear momentum in physics is called angular momentum. Because it is a conserved quantity—the total angular momentum of a closed system stays constant—it is significant in physics. Both the direction and the amplitude of angular momentum are preserved.

Given the density of air to be 1.29 kg/m3 and a wind speed of 73.0 mi/h

We have to find the magnitude of the angular momentum

Let,

ρ = Density of air = 1.29 kg/m^3

v = Speed of wind = 73.0 mi/h = 0.032 km/s

M = angular momentum of air

Let the volume of air be 1 m^3

Mass = Volume x ρ = 1 x 1.29 = 1.29 kg

Momentum = M = mass x velocity

Momentum = 1.29 x 0.0032

Momentum = 4.128 x 10^(-3) kg·m^2/s

Hence the magnitude of the angular momentum of air will be 4.128 x 10^(-3) kg·m^2/s

Learn more about angular momentum here:

https://brainly.com/question/7538238

#SPJ10

the 3kg object in figure is released from rest at height of 5m on curved frictionless ramp.at the foot of the ramp is a spring of force constant 400N/m.the object slide down the ramp and into the spring, compressing it a distance x before coming momentarily to rest. a) find x
b)describe the motion of the object (if any) after the block momentarily comes to rest?

Answers

The value of x given the data from the question is 0.86 m

How to determine the energy

From the data given above, we can s determine the energy as follow:

Mass (m) = 3 KgHeight (h) = 5 mAcceleration due to gravity (g) = 9.8 m/s² Energy (E) = ?

E = mgh

E = 3 × 9.8 × 5

E = 147 J

How to determine the value of xSpring constant (K) = 400 N/mEnergy (E) = 147 JExtention (e) = x = ?

E = ½Ke²

147 = ½ × 400 × x²

147 = 200 × x²

Divide both side by 200

x² = 147 / 200

Take the square root of both sides

x = √( 147 / 200)

x = 0.86 m

Since the block came to rest, there is no motion

Learn more about spring constant:

https://brainly.com/question/9199238

#SPJ1

Psychology is a combination of the Greek words psyche, which means “soul” or “mind,” and logos, which means “the study of.”


Please select the best answer from the choices provided

T
F

Answers

Greek terms psyche, which means "soul" or "mind," and logos, which means "the study of," are combined to form the english word psychology. The assertion is true.

What is Psychology?

Psychology is the name given to the scientific study of the mind and behavior. Psychologists are actively interested in researching and comprehending how the mind, the brain, and behavior work.

Psychology is a combination of the Greek words psyche, which means “soul” or “mind,” and logos, which means “the study of.”The given statement is corect.

Hence the best answer from the choices provided will be true.

To learn more about the psychology refer;

https://brainly.com/question/10980588

#SPJ1

When compared to wave II, wave I represents a wave with...
Select one:
a. a higher frequency.
b. a lower frequency.
c. an equal frequency.
d. a greater amplitude.

Answers

Wave I stands for a wave with an equal frequency as wave II. Option c is correct.

What is the frequency?

Frequency is defined as the number of repititions of a wave occurring waves in 1 second. Its unit is Hz.

Frequency is given by the formula as,

[tex]\rm f = \frac{1}{t}[/tex]

Where,

f is the frequency

t is the period of the wave

From the digrame it is observed that both the wave has the same period. So that they will have the same frequency.

Hence option c is correct.

To learn more about the frequency reference the link;

https://brainly.com/question/14926605

#SPJ1

A uniform plate of height 1.870 m is cut in the form of a parabolic section.
The lower boundary of the plate is defined by: y = 0.500[tex]x^{2}[/tex]. Find the distance from the rounded tip of the plate to the center of mass.

Answers

The distance from the rounded tip of the plate to the center of mass is 1.87 m.

What is center of mass?

The center of mass is a point inside or outside the mass where all of the mass is concentrated.

The y-coordinate of the centroid is given by the ratio of two definite integrals;

Yc = ∫ydm/∫dm,

where dm is a density function

For the uniform plate, δ does not change with position in the plate.

Yc = ∫yδdA/∫δdA

Yc = ∫ydA/∫dA.

dA is a horizontal slice of the plate with dimensions xdy.

Solving the parabola for x,

y = 0.5x²

x = ± √(y/0.50), where the negative value corresponds to the left half of the parabola and the positive to the right half.

dA = (√(y/0.50)

     = √(y/0.50))dy

     = 2(√(y/0.50))dy

The limits of integration are from zero to 1.870, the top of the plate.

∫ydA = ∫2y√(y/0.50)dy = 7.232 m³

∫dA = ∫2√(y/0.50)dy = 3.868 m²

∫ydA/∫dA =  7.232 m³/3.868 m²

∫ydA/∫dA =  1.869700 m

∫ydA/∫dA =   1.87 m

Thus, the distance from the rounded tip of the plate to the center of mass is 1.87 m.

Learn more about center of mass.

https://brainly.com/question/8662931

#SPJ1

Kim is ice-skating going 4.6 m/s. What is her velocity after 10 seconds ?

Answers

This is a uniform rectilinear motion (MRU) exercise.

To start solving this exercise, we obtain the following data:

Data:v = 4.6 m/sd = ¿?t = 10 sec

To calculate distance, speed is multiplied by time.

We apply the following formula: d = v * t.

We substitute the data in the formula: the speed is equal to 4.6 m/s, the time is equal to 10 s, which is left as follows:

[tex]\bf{d=4.6\dfrac{m}{\not{s}}*10\not{s} }[/tex]

[tex]\bf{d=46 \ m}[/tex]

Therefore, the speed at 10 seconds is 46 meters.

[tex]\huge \red{\boxed{\green{\boxed{\boldsymbol{\purple{Pisces04}}}}}}[/tex]

A resistor has a resistance of 8.2 kΩ. If a voltage of 15.9 V were placed across it, what would be the current, in mA? Give the answer to two decimal places; don't worry if the computer adds zeroes.

Answers

The value of the electric current for the given conditions willl be  1939.02 A.

What is ohm’s law?

Ohm's law claims that the voltage across a conductor is directly proportional to the current flowing through it.

Ohm's law claims that the voltage across a conductor is direct to the current flowing through it. This current-voltage connection may be expressed mathematically as,

V=IR

15.9 V = I × 8.2 × 10³ Ω

I = 1939.02 A

Hence, the value of the electric current for the given conditions willl be  1939.02 A.

To learn more the ohm's law refer to the link;

https://brainly.com/question/796939

#SPJ1

please help me in this questions ​

Answers

10. Rainy day
11. Sunny day
12. Windy day
13. Cloudy day
14. Cirrus cloud
15. Cumulus cloud
16. Stratus cloud
17. Sunny
18. Rainy

Answer:

Rainy daywindy daysunny daycloudy daysorry I don't know the answer of question 8.sunglassesumbrella:-(:-):-):-(day ☀️night day ☀️night Day ☀️Day ☀️night night

Explanation:

Hope I give all correct answer please mark as brainlest answer

an object is 27.0 cm from a concave mirror of focal length 15.0 cm. find the image distance.

Answers

The distance of the Image will be -33.75 cm

A concave mirror has an inward-curving reflecting surface that faces away from the light source. Unlike convex mirrors, a concave mirror's image forms a variety of images based on the object's proximity to the mirror.

Given that, an object placed 27 cm from a concave mirror having the focal length of 15 cm

We have to find distance of the Image

Using Mirror Formula:

1/f = 1/v + 1/u

Where,

f = focal length

v =  Image distance from the mirror

u = object distance from the mirror (concave)

Substitute the known values in the above formula to find the value of 'v' i.e. from the mirror.

1/(-15) = 1/v + 1/(-27)

1/(-15) = 1/v - (1/27)

1/v = -0.029

v = -33.75 cm

Therefore the distance of the Image will be -33.75 cm

Learn more about concave mirror here:

brainly.com/question/9816370

#SPJ10

5.00 μF, 10.0 μF, and 50.0 μF capacitors are connected in series across a 12.0-V battery.
(a) How much charge is stored in the 5.00-μF capacitor?
(b) What is the potential difference across the 10.0-μF capacitor?

Answers

(a)  The charge stored in the 5.00-μF capacitor is 37.2  μC.

(b) The potential difference across the 10.0-μF capacitor is 3.72 V.

What is capacitor?

The capacitance of a capacitor is defined as the ratio of the charge stored and the potential difference between the capacitor.

The capacitance of a capacitor is denoted by C and expressed as

C = Q/V

Given, 5.00 μF, 10.0 μF, and 50.0 μF capacitors are connected in series across a 12.0-V battery.

(a) The equivalent capacitance is

1 / Ceq = 1 / C₁ +1 / C₂ + 1/ C₃

Substitute the values, we get

Ceq = 3.1  μF

The charge stored in 5.00-μF capacitor is

Q  = Ceq x V

Q = 3.1  μF x 12 V

Q = 37.2  μC

Thus, the charge stored in the 5.00-μF capacitor is 37.2  μC

(b) The potential difference across the 10.0-μF capacitor is given by

V = Q/C₂

Put the values, we get

V = 37.2 / 10

V = 3.72 V

Thus, the potential difference across the 10.0-μF capacitor is 3.72 V.

Learn more about capacitor.

https://brainly.com/question/12733413

#SPJ1

A 808 kg automobile is sliding on an icy street. It collides with a parked car which has a mass of 632 kg. The two cars lock up and slide together with a speed of 15.0 km/h. What was the speed of the first car just before the collision?

Answers

The speed of the first car just before the collision is 26.73 km/h.

What is conservation of momentum principle?

When two bodies of different masses move together each other and have head on collision, they travel to same or different direction after collision.

The external force is not acting here, so the initial momentum is equal to the final momentum. For inelastic collision, final velocity is the common velocity for both the bodies.

m₁u₁ +m₂u₂ =(m₁ +m₂) v

Given a 808 kg automobile is sliding on an icy street. It collides with a parked car which has a mass of 632 kg. The two cars lock up and slide together with a speed of 15.0 km/h.

Second car is parked, so its velocity will be zero.

808 x u +632 x 0 = (808 +632 ) x 15

u  = 26.73 km/h

Thus, the speed of the first car just before the collision is 26.73 km/h

Learn more about conservation of momentum principle

https://brainly.com/question/14033058

#SPJ1

Other Questions
is 8.6 a rational number Which type of context should he consider to better understand this story among students who drink, what percentage typically have not drank in the last month? The graph of the cube root parent function y = RootIndex 3 StartRoot x EndRoot is translated to form f(x) shown on the graph.On a coordinate plane, a cube root function goes through (negative 7, 0), has an inflection point at (negative 6, 1), and goes through (2, 3).Which equation represents f(x)?f(x) = RootIndex 3 StartRoot x + 6 EndRoot + 1f(x) = RootIndex 3 StartRoot x minus 6 EndRoot + 1f(x) = RootIndex 3 StartRoot x + 6 EndRoot minus 1f(x) = RootIndex 3 StartRoot x minus 6 EndRoot minus 1 Which countries were part of frances expansion into southeast asia in the 1900s? check all that apply. china vietnam laos japan cambodia sri lanka What types of animals are prosimians? Given the sequence in the table, which of the following represents the sum for term 5 through term 11 in sigma notation? (1 point)a an1 22 103 50 Giraffe Jack is 19 feet tall, and Ostrich Jim is 9 feet tall. A) What percent of Jack's height is Jim's height? B)What percent of Jim's height is Jack's height? What was one effect that joining the warsaw pact had on the nations of eastern europe?. Lines l and m are parallel and intersect transversal p, as shown in the diagram below.What is the value of n?A 6B 10C 20D 24 Primary differences in style of Beethoven and Bach As one approaches the equator, the angle of incidence ____ and the atmosphere attenuation ______ How did the balance of power in Europe shift as a result of World War 1? Which strategy is based on the knowledge that several urgent health-related challenges, such as inequities, chronic disease, and skyrocketing costs, are often complex, multidimensional, and connected to one another g(x) f(x) = 6x 3 cosine function with y intercept at 0, negative 3 h(x) = 2 cos(x + ) 1 Using complete sentences, explain which function has the greatest y-intercept. (10 points)full step by step process please. A patient suffers from altered speech and behavior, and often does not show emotion. Which type of schizophrenia exhibits these symptoms?disorganized schizophreniaundifferentiated schizophreniaparanoid schizophreniacatatonic schizophrenia Spontaneous genetic mutations are one cause of cancer. They can happen at any time for various reasons such as exposure to certain carcinogens. Researchers are working to understand more about what causes them. If X is how many mutations there are in a person's body at time Y, X is a ________ random variable. A small mass of m = 187 g hangs from a string of length l = 1.21 m.Calculate the initial speed v the mass m should be given at the bottom, so that the string reaches a maximum angle of = 36.5? Find the LinReg line of best fit for this data set. {(5, 6.3), (4, 5.6), (3, 4.8), (2, 3.1), (1, 2.5), (0, 1.0), (1, 1.4)} Increasing or Decreasing the Money SupplyComplete the table in question 7.7. The Fed has three tools it can use to influence the money supply. In the following table, list the threetools and then explain how the Fed uses each tool to increase or decrease the money supply.Fed toolTo increase the money supply,the FedTo decrease the money supply.the FedA