The level of water in an olympic size swimming pool (50.0 meters long, 25.0 meters wide, and about 2.00 meters deep) needs to be
lowered 1.50 cm. if water is pumped out at a rate of 4.60 liters per second, how long will it take to lower the water level 1.50 cm?

Answer: d. boiling point of ethyl alcohol is 75.

Explanation:

We have choice (d) 0.6 mole of NaOH as the response based on the question.

The proportion of H3O+ ions within the solution is reduced by adding a base. Chemically speaking, a base and a acid are opposites. An acidic solution moves away from the centre of the pH scale and becomes less acidic as a base is introduced. This process of neutralize acid is known as neutralization .

For neutralization reaction :

Number of moles of acid, CH3COOH = Number of moles of base, NaOH = 0.6 mol

So, number of moles of NaOH required = 0.6 mol of NaOH

Therefore, option (d) " 0.6 moles of NaOH " is the answer.

To know more about Neutralize visit :

https://brainly.com/question/27891712

#SPJ4

The Complete Question :

if you have a total of 0.6 moles of CH₃COOH, how many moles of NaOH would you need to completely neutralize CH₃COOH.

A) 0.9 moles NaOH

B) 0.3 moles NaOH

C) No test is provided

D) 0.6 moles NaOH

a. 1st N (sp 2); 2nd N (sp 2) is correct for the hybridization about each interior atom in N2H2.

The nitrogen atoms in N2H2 molecule are sp2 hybridized. This is because the nitrogen atoms are bonded to three other atoms (two hydrogen atoms and one nitrogen atom) in a trigonal planar geometry, which requires three hybrid orbitals for bonding.

Hybridization is a theoretical concept used in chemistry to explain the bonding geometry of certain atoms in a molecule. It refers to the process of mixing atomic orbitals of similar energy to form a set of equivalent hybrid orbitals. The hybridization of an atom can be determined by the number and type of atoms it is bonded to and the geometry of the molecule. The most common types of hybridization are sp3, sp2, and sp, which correspond to tetrahedral, trigonal planar, and linear geometries, respectively.

Learn more about hybridization here:

brainly.com/question/14140731

#SPJ4

If it takes three breaths to blow up a balloon to 1.2 liters and each breath supplies the balloon with 0.60 moles of exhaled air, the total number of moles of air in the 1.2 L balloon is:

0.60 moles/breath x 3 breaths = 1.8 moles

To find out how many moles of air are in a 3.0 L balloon, you can use the relationship between moles and volume (at constant temperature and pressure):

n = PV/RT

where:

n = number of moles

P = pressure (assumed to be constant)

V = volume

R = ideal gas constant

T = temperature (assumed to be constant)

Since the balloon is filled with exhaled air, we can assume that the temperature and pressure inside the balloon are approximately the same as the ambient temperature and pressure. So we can use the ideal gas constant (R) and the current temperature (T) to calculate the number of moles of air in a 3.0 L balloon.

Then,

n = (1.8 moles * 3.0 L) / (R * T)

It should be noted that we are assuming a constant temperature and pressure, and also exhaled air is not a pure gas and its composition can vary, thus the ideal gas law may not be the most accurate way to calculate the number of moles of air in a balloon.

Learn more about moles here:

https://brainly.com/question/28239680

#SPJ4

The balanced equation for the reaction between hydrogen and oxygen to form water is:

2H2 + O2 -> 2H2O

To react 4 moles of hydrogen with 3 moles of oxygen, we will also need 1.5 moles of oxygen.

Since we have enough hydrogen and not enough oxygen to react completely, we can calculate the theoretical yield of water produced.

4 moles of H2 will react to produce 2 moles of H2O and 1.5 moles of O2 will react to produce 0.75 moles of H2O. Therefore, the total theoretical amount of water produced is 2 + 0.75 = 2.75 moles of water.

percent yield = (actual yield / theoretical yield) x 100

percent yield = (3 / 2.75) x 100 = 109.09%.

So the percent yield is 109.09%. This means that 109.09% of the theoretical yield was actually produced, and the reaction was more efficient than expected.

It's worth noting that percent yield can't be more than 100% because it implies that more than the theoretical amount of product was produced, which is not possible. In this case, the percent yield is not a realistic value, therefore, the actual yield and the theoretical yield should be rechecked.

The subscript 2 denotes that the material contains two aluminum atoms. Silvery-white and light in weight, aluminum is a metal. It is supple and moldable. Cans, foil, culinary kitchenware, window frames, beer kegs, and airplane parts are just a few examples of the many goods that employ aluminum.

Gibbsite and boehmite, two alpha-hydroxide compounds, are found in bauxite. In the synthesis of aluminum compounds such aluminum disulfide, sodium aluminate, metal fluoride, & aluminum chloride hexahydrate, aluminum trihydroxide is a key ingredient.

Natural environments do not contain pure aluminum. Beginning with bauxite, which is made up of dehydrated al2o3 (4.0% to 60%) combined with silica + iron oxide, the manufacturing of primary pure metal can begin. For every 4 to 5 tons of bauxite ore, 2 tonnes of aluminium are produced

To know more about aluminum visit:

https://brainly.com/question/9496279

#SPJ4

Answer:

Explanation:

Rather than doing all the reactions, let's look at one in detail and develop a process for answering the rest.

Start with a pencil and paper.  Pencil, because balancing equations requires some initial guesses that often need to be changed (erased).

Make a table such as shown on the attached worksheet.  The first problem is demonstated on the attachment.

1. N2O5 -> N2O4 + O2

   2N2O5 -> 2N2O4 + 1O2

2. KNO3 -> KNO2 + O2

   We only need 1 K and 1 N for the producrs, and 1 KNO3 supplies that number.  But 1 KNO3 has 3 O atoms, while the only place for the O atoms to go is )2, a diatomic molecule.  To obtain 2O for the 1O2, we need to change the KNO3 coefficient to 2:

  2KNO3 -> KNO2 + O2

Now change the KNO2 coefficient to 2 (to accomodate the 2 K and 2 N atoms):

  2KNO3 -> 2KNO2 + O2

The reactants have 6 O atoms, so we should be balanced:

2KNO3 -> 2KNO2 + O2

   K    2          2

   N    2          2

   O    6          4+2 = 6

3. NH4NO2 -> N2 + H2O

   NH4NO2 -> N2 + 2H2O

N        2             2           0

H         4            0           4

O         2            0           2  Everything is balanced

4. O3 -> O2

    O3 -> O2

    2O3 -> 3O2

     6 O      6 O

5. Zn + AgCl -> ZnCl2 + Ag

  Zn + 2AgCl -> ZnCl2 + 2Ag

Zn  1                         1

Ag           2                         2

Cl              2              2

Everything is balanced.

6. 2NaOH + H2SO4 -> Na2SO4 + 2H2O

Na    2              0                2              0

O      2              4                4              2

H      2              2                                 4

S                       1                1

The most common types of precipitation are rain, hail, and snow.

Rain is precipitation that falls to the top of the Earth as water droplets. Raindrops form around microscopic cloud moisture nuclei, The ocean plays a key role in this essential cycle of water. The ocean holds 97% of the total water on the planet; 78% of global precipitation happens over the ocean

Precipitation forms in the clouds when water vapor precipitation into bigger and bigger droplets of water. When the drops are heavy sufficient, they fall to the Earth. If a cloud is colder, like it would be at a higher height, the water droplets may freeze to form ice.

So we can conclude that The main forms of precipitation involving drizzle, are rain, sleet, snow, graupel, and hail.

Learn more about precipitation here: https://brainly.com/question/1783904

#SPJ1

The axis that the orbital is aligned with is indicated by the subscript x in a px orbital.

The correct statement is A.

px orbital: A p atomic orbital that is located on the x-axis of the Cartesian coordinate system. A non-hybridized carbon atom's px, py, and pz atomic orbitals are located along the x, y, and z axes of the Cartesian coordinate system. Blue represents the atomic orbital of px. These orthogonal p atomic orbitals are.

Context. px. identifies properties that cannot have user input on an HTML form because they are special properties. py. Values can be entered by users on an HTML form because properties with names that begin with py are not special.

To know more about PX orbital visit:

https://brainly.com/question/16389816

#SPJ4

Answer and Explanation for the First Question:

For the first question, when a 3.0 M aqueous NaOH solution is added to a neutral solution containing litmus, the color change in the solution would be from purple to blue. Thus, the answer would be C.

Litmus exists in solution in equilibrium form as H-Lit(aq) (red) ⇌ H⁺(aq) + Lit⁻(aq) (blue). At around pH 7, or neutral, the solution contains an equal amount of both forms of litmus, resulting in a purple color. This is because there are always some H⁺ ions present in the solution, even in neutral solutions, and the red and blue forms of litmus are present in equal amounts, which make the solution purple.

When a strong base like NaOH is added to the litmus solution, the OH⁻ ions from NaOH fully dissociate and react with the H⁺ ions in the litmus solution, forming water. This reaction causes the equilibrium position to shift in the direction of replacing the lost H⁺ ions. As more H-Lit(aq) molecules dissociate to form H⁺(aq) and Lit⁻(aq), the litmus becomes more ionized.

Since ionized litmus in solution is blue, the color of the solution will change from a neutral purple to a basic blue.

Answer and Explanation for the Second Question:

For the second question, according to the information given, the most likely pH of the solution is 6.0. Thus, the answer would be B.

The pH of the solution can be determined by looking at the color change of the three indicators added. Bromocresol green is yellow at the acidic end of its range, blue at the basic end of its range, and its pH range is 3.8 to 5.4. Chlorophenol red is yellow at the acidic end of its range, red at the basic end of its range, and its pH range is 5.2 to 6.8. Thymol blue is yellow at the acidic end of its range, blue at the basic end of its range, and its pH range is 8.0 to 9.6. Since the solution is blue when bromocresol green is added and orange when chlorophenol red is added, the pH of the solution must be between 5.4 and 6.8. The only possible value in this range is 6.0, which is why it is the most likely pH of the solution.

The percentage dissociation is 0.97% and the hydrogen ion concentration is 1.93 x 10^-3 mol/dm^3.

we need to use the equation:

Ka = [H^+][A^-] / [HA]

where Ka is the equilibrium constant, [H^+] is the hydrogen ion concentration, [A^-] is the concentration of the dissociated form of the acid (acetate ion), and [HA] is the concentration of the undissociated form of the acid (ethanoic acid).

We know the concentration of ethanoic acid, [HA] = 0.2 mol/dm^3, and the value of the equilibrium constant, Ka = 1.85 x 10^-5 mol/dm^3.

Using the equation:

Ka = [H^+][A^-] / [HA]

1.85 x 10^-5 = [H^+][A^-] / 0.2

[H^+][A^-] = 1.85 x 10^-5 * 0.2

[H^+][A^-] = 3.7 x 10^-6 mol^2/dm^6

Since the concentration of the acetate ion is equal to the concentration of the hydrogen ion, [A^-] = [H^+].

So,

[H^+]^2 = 3.7 x 10^-6 mol^2/dm^6

[H^+] = sqrt(3.7 x 10^-6) = 1.93 x 10^-3 mol/dm^3

The hydrogen ion concentration is 1.93 x 10^-3 mol/dm^3.

To find the percentage dissociation, we divide the concentration of the acetate ion by the initial concentration of ethanoic acid and multiply by 100:

Percentage dissociation = ([A^-] / [HA]) * 100

Percentage dissociation = (1.93 x 10^-3 / 0.2) * 100 = 0.97%.

Therefore, The percentage dissociation is 0.97% and the hydrogen ion concentration is 1.93 x 10^-3 mol/dm^3.

Learn more about hydrogen ion concentration here: brainly.com/question/29022526

#SPJ1

If two samples of matter from two different sources have the same mass percent composition of their elements, they can be classified as isotopic compounds.

Isotopic compounds are compounds that have the same number and types of atoms, but they may have different isotopes of those atoms. Isotopes are atoms of the same element that have the same number of protons but a different number of neutrons.

Because they have the same number of protons, they have the same atomic number and chemical properties, but because they have different numbers of neutrons, they have different atomic masses and may have different physical properties.

When two samples have the same mass percent composition of their elements, it means that they have the same number of atoms of each element, and the weight of each element is also the same, which means that they are isotopic compounds.

To learn more about isotopes:

https://brainly.com/question/29989166

#SPJ4

This creates a total of six electrons in the bonding molecular orbitals, giving the bond order of 2.5.

Molecular is the level of organization that deals with atoms and molecules. At this level, we are looking at the chemical structure of matter. Molecules are formed when atoms of different elements bond together to form a single unit.

The molecular orbital diagram for N2 consists of two valence orbitals, a 2s orbital and a 2p orbital. Each atom contributes one electron to the 2s orbital and three electrons to the 2p orbital. The electrons in the 2s orbital are paired, while the electrons in the 2p orbital are unpaired.
The molecular orbital diagram for N2 is as follows:
2s orbital:
e- ↑↓
2p orbital:
e- ↑  ↑  ↑
The bond order of N2 is 2.5, which indicates that it is a strong triple bond. This is because the 2s and 2p orbitals overlap to form three bonding molecular orbitals, each containing two electrons. This creates a total of six electrons in the bonding molecular orbitals, giving the bond order of 2.5.

To learn more about molecular
https://brainly.com/question/15092254
#SPJ4

The change in enthalpy of the solution when 1.05 mol of calcium chloride dissolves in water is 15455.43 J/mol

The enthalpy change when a substance dissolves in water is called the heat of solution or enthalpy of solution. The heat of solution can be calculated using the equation:

ΔHsolution = q / n

Where:

q = heat absorbed or released during the solution process (can be measured by a calorimeter)

n = number of moles of solute dissolved

Given that the heat capacity of the solution and the calorimeter is 1258 J/°C, and the temperature rose from 25.0°C to 37.9°C, we can calculate the heat absorbed during the solution process using the equation:

q = mcΔT

Where:

Substituting the values we get:

q = 1258 J/°C * 12.9°C = 16,228.2 J

Now, we can use this value of q to calculate the enthalpy change when 1.05 mol of calcium chloride dissolves in water by using the equation:

ΔHsolution = q / n

Substituting the values we get:

ΔHsolution = 16,228.2 J / 1.05 mol = 15,455.43 J/mol

Therefore, the enthalpy change when 1.05 mol of calcium chloride dissolves in water is 15,455.43 J/mol.

Learn more on enthalpy change here;

https://brainly.com/question/16387742

#SPJ1

Answer:

11. NA+

12. Radium(ra)

13.Orbit or level energy

Explanation:

The final % BPB in each dilution is 0.001%, 0.0005%, 0.0004%, 0.0002%, 0.00004% and 0.00002%.

To calculate the final % BPB in each dilution, you need to take into account the dilution factor and the initial concentration of the 0.1% BPB solution. The dilution factor is the ratio of the final volume to the initial volume.

The final concentration of BPB in each dilution can be calculated by using the following formula:

Final concentration = Initial concentration x dilution factor

The dilution factors for each dilution are 1:2, 1:4, 1:5, 1:10, 1:50 and 1:100 respectively. By multiplying the initial concentration of 0.1% with these dilution factors, we get the final concentrations of 0.001%, 0.0005%, 0.0004%, 0.0002%, 0.00004% and 0.00002% respectively.

It's important to note that when preparing dilutions, it is important to make sure that the final volume of each dilution is the same, in this case it's 4ml and to use the appropriate dilution factor for each case, as it affects the final concentration of BPB.

To know more about dilution factor click below:

https://brainly.com/question/20113402#

#SPJ4

Two of the four compounds will exhibit cis-trans isomerism. They are [Pt(NH₃)₂Cl₂] and [Cr(NH₃)₄Cl₂]+, respectively.

In chemistry, isomers are molecules or polyatomic ions with the same number of atoms in each element as their molecular formulae, but different atomic configurations in space. The existence or absence of isomers is referred to as isomorphism. Not all isomers share the same physicochemical characteristics. Isomerism is the existence of molecules with the same number of atoms (and, consequently, the same formula), but with different chemical and physical characteristics. When several compounds have the same chemical formula but different chemical structures, this is known as isomerism.

Here,

Cis-trans isomerism will be observed in two of the four compounds. They are respectively [Pt(NH₃)₂Cl₂] and [Cr(NH₃)₄Cl₂]+.

To know more about isomerism,

https://brainly.com/question/20419220

#SPJ4

IR spectroscopy can be used to monitor the conversion of nitriles to carboxylic acids by observing changes in the absorption bands of the C-N triple bond at 1700 [tex]cm^-1[/tex], C=O functional group at 3300 [tex]cm^-1[/tex], C-O-H functional group between 2200 and 3600 [tex]cm^-1[/tex], and disappearance of the signal at 2200 [tex]cm^-1[/tex].

IR spectroscopy can be used to monitor the progress of the reaction by observing changes in the absorption bands of the functional groups present in the nitrile and carboxylic acid. During the conversion of nitrile to carboxylic acid, the nitrile C-N triple bond absorbs at around 1700  [tex]cm^-1[/tex].

As the reaction proceeds, this signal will disappear as the triple bond is broken. Additionally, carboxylic acids have a sharp absorption band at around 3300 [tex]cm^-1[/tex]. corresponding to the C=O functional group. As the reaction proceeds, this signal will appear as the carboxylic acid is formed.

Furthermore, carboxylic acids have a broad absorption band between 2200 and 3600 [tex]cm^-1[/tex]. corresponding to the C-O-H functional group. As the reaction proceeds, this signal will appear as the carboxylic acid is formed and the signal at 2200 [tex]cm^-1[/tex]. from the nitrile will disappear.

To learn more about IR spectroscopy at

https://brainly.com/question/28543039?referrer=searchResults

#SPJ4

Nitrate, also referred to as "cyan syndrome," is a potentially fatal blood disease that can affect neonates less than six months.

The necessity of nitrates in plants. Phosphorus

 potassium, and nitrogenPhosphorus The growth of leaves is mostly controlled by nitrogen. Plants utilize nitrates, which are compounds of nitrogen and oxygen. Typically, they absorb nitrates from the soil.

Uptake and Needs of Plant Nitrogen Plants can take up the soil's nitrogen as NH4+ and NO3 ions, but most of it is snapped up as nitrate due to how common nitrification is in agricultural soils. Nitrate is easily transported to plants.

To know more about Nitrate visit:

https://brainly.com/question/5346392

#SPJ4

The amount of caffeine in a cup of coffee can vary widely depending on the type of bean, the brewing method, and the serving size.

On average, an 8-ounce (240-milliliter) serving of coffee contains about 95 milligrams of caffeine. However, this can range from 40 milligrams to as much as 200 milligrams or more depending on the factors mentioned above.

It's worth noting that a standard cup of coffee has about 95-165mg, but a larger cup could have more than that. Also, some types of coffee have higher caffeine content than others.

It's always good to check the label of the product you are consuming or ask the vendor for more information if you are concerned about your caffeine intake.

Answer:

A hygroscopic salt is a salt that can absorb water

Explanation:

This water usually comes from water vapor in the atmosphere and the process occurs at room temperature. Once the water is absorbed, the physical properties of the salt, like color and viscosity, may change.

sorry if wrong im trying my best forgive me

Answer:

A hygroscopic salt is a salt that can absorb water. This water usually comes from water vapor in the atmosphere and the process occurs at room temperature. Once the water is absorbed, the physical properties of the salt, like color and viscosity, may change. However, the hygroscopic substance does not dissolve.

Hygroscopy - A substance that has the ability to adsorb and absorb moisture or water from the surrounding environment is known as hygroscopic and its property is called hygroscopy. Examples - Silica gel, honey, methanol, concentrated sulphuric acid, glycerine, ethanol, etc.

Explanation:

if it helped you please mark me a brainliest ♡♡

Answer:

see full answer in below

Explanation:

The mass number is used to calculate the number of neutrons in one atom of an element. In order to calculate the number of neutrons you must subtract the number of protons (atomic number) from the mass number (atomic mass or mass number).

Answer:

The mass number is used to calculate the number of neutrons in one atom of an element. In order to calculate the number of neutrons you must subtract the atomic number from the mass number.

A collection of electrons in a shell organized into subshells based on the form of the space they fill.

Each subshell's electrons are organized into orbitals, which are areas of the atom's interior where a certain electron is most likely to be found. An atomic orbital is a function that describes the position and wave-like activity of an electron in an atom in terms of both atomic theory and quantum mechanics.

This function can be used to determine the likelihood of discovering any atom's electron in any particular area surrounding the nucleus.

The physical area or space where the electron may be calculated to be present, as predicted by the specific mathematical shape of the orbital, is sometimes referred to as an atomic orbital.

The complete question and answer are attached as images.

Want to know more about subshell visit the link which is given below;

https://brainly.com/question/19221869

#SPJ4

The difference between a magma formed by fractional crystallization and one formed by ordinary cooling is that the magma becomes progressively enriched in silica.

Learn more about fractional crystallization of magma refer to :

https://brainly.com/question/14201998

#SPJ4

The amount of sucrose (in grams) must be weighed out for the given reaction is6.846g.

Moles n = W/ M

Given detail.

molarity of sucrose = 0.2 M

volume of solution 100 ml

Relationship between moles and molarity is.

M = n/ V

On placing value in it

n = 0.02

molar mass of sucrose = 342.3 g/ mole

Now we calculate needed mass from 1st equation.

W = (0.02) (342.3)

= 6.846 g

Molarity is defined as the moles of a solute per liters of a result. Molarity is also known as the molar concentration of a solution.

Learn more about molarity visit:

brainly.com/question/19517011

#SPJ4

Answer:

Pretty sure that’s correct

Explanation:

Answer: The answer is:

              The grass population will increase.

Explanation:  Didn't see anything that could be correct, so I chose this on the K12 test and it was correct.

The largest number of moles of chloride ions are in 100ml of 0.3M AlCl3.

The moles is calculated as

molarity= moles/ molecular weight×100

moles of AlCl3= 0.1×0.3×133.34

= 4 mole where there are 3 chloride ion so it will be 12 moles.

Moles of MgCl2= 0.05× 0.6× 95.21

= 2.85 equivalent to 3moles where 2 chloride ion so it will be

Moles of NaCl =0.2× 0.4 ×58.5

= 4.67 where there are 1 chloride ion so it will be 4.67.

Mole is a measure of the number of substances and molarity is a measure of concentration. Molarity indicates the amount of substance present in a mixture. Molarity is given as the moles of substance in the volume of solvent. A mole is a unit, but a molarity is not.

For more information on moles kindly visit to

https://brainly.com/question/26416088

#SPJ4

Since there are three oxygen atoms and a total of 16 times as much carbon as there are carbon atoms, the formula 03C2 will result in a gigantic oxygen to carbon ratio of 2 to 1.

Carbon is an element with symbol 'C' and atomic number 6 (from the Latin carbo, meaning "coal"). It has a tetravalent atom, which means that four of its electrons can be used to create covalent chemical bonds. It is nonmetallic. The periodic table's group 14 includes it. The crust of the Earth contains 0.025 percent carbon.

Without carbon, life on the planet would not be conceivable. This is partly because carbon can easily make bonds to other atoms, allowing biomolecules like RNA and DNA which are crucial for the development and replication that characterizes life, to take on a variety of shapes and functions.

To know more about carbon visit :

https://brainly.com/question/3049557

#SPJ4

A solute makes the freezing point of a solution lower than the freezing point of the pure solvent because The liquid phase of the solution reaches equilibrium with the solid phase at a lower temperature.

If a solute is dissolved in the liquid at the triple point, the escaping tendency or vapor pressure of the liquid solvent is lowered below that of the pure solid solvent. The temperature must drop to reestablish equilibrium between the liquid and the solid. Because of this fact, the freezing point of a solution is always lower than that of the pure solvent.

The freezing point depression of a solvent is a function only of the number of particles in the solution, and for this reason it is referred to as a colligative property. The depression of the freezing point, like the boiling point elevation, is a direct result of the lowering of the vapor pressure of the solvent.

To know more about freezing point here

https://brainly.com/question/24314907

#SPJ4

In photoelectron spectrum for sulfur atoms valence electrons corresponds to peak with lowest binding energy.

The relative energies of occupied molecular orbitals can be determined from a photoelectron spectrum by ionization. (i.e. the electron's ejection). The energy spacing between the vibrational levels of a specific electronic state can also be determined using a photoelectron spectrum.

The electrons in the atom's various subshells are represented by the peaks in the PES spectra. The valence electrons are represented by the peaks with the lowest binding energies, while the inner-shell or core electrons are represented by the peaks with the highest binding energies.

To know more about photoelectron spectrum visit:

https://brainly.com/question/5785255

#SPJ4