The pH of given solution is 8.77. It can be calculated by the pka value of NH₄/NH₃ and molar concentrations of both the ionic compounds.
A solution containing 0.12 NH₄Cl and 0.03 moles of NaOH undergoes a reaction in which NaOH reacts with NH₄Cl to form NaCl, producing NH₃ and H₂O.
NH₄Cl + NaOH = NH₃ + NaCl + H₂O
The pH is therefore equal to the sum of the pKa and the logarithm of the base concentration divided by the acidity. In both cases the base concentration is 0.03 molar. When sodium hydroxide is added, 1 mole of ammonia is produced for each mole added. The result is less ammonium with each addition of hydroxide.
This is how we come to a solution.
pH = pKa + log [base]/log [acid]
pH = 9.25 + log 0.03/log 0.12
pH = 8.77
To learn more on Calculation of pH, please refer:
Brainly.com/question/28343443
#SPJ4
Figure 1 shoes an outline of the modern periodic table
A mixture with h2 and he exerts a total pressure of 0.480 atm. if there is 1.00 g of h2 and 1.00 g of he in the mixture, what is the partial pressure of the helium gas?
The partial pressure of helium (He) in the mixture containing 1 g of H₂ and 1 g of He is 0.16 atm
What is Partial pressure?
Partial pressure can be explained if each specific gas contributes a part of the total pressure and that part is the partial pressure of that gas.
At first to find Mole For H₂:
Mass of H₂ = 1 g
Molar mass of H₂ = 2 × 1 = 2 g/mol
Mole of H₂ =?
Mole = mass / molar mass
Mole of H₂ = 1/2
Mole of H₂ = 0.5 mole
To find the mole For He:
Mass of He = 1 g
Molar mass of He = 4 g/mol
Mole of He =?
As we know, Mole = mass / molar mass
Mole of He = 1/4
Mole of He = 0.25 mole
Total Mole = Mole of Hydrogen+ Helium
Total mole = 0.5 + 0.25
Total mole = 0.75 mole
Next, we shall determine the mole fraction of He.
Mole fraction = mole / total mole
Mole of He = 0.25 mole
Total mole = 0.75 mole
Mole fraction of He = 0.25 / 0.75
Mole fraction of He = 0.33
To determine the partial pressure of He.
Partial pressure = mole fraction × total pressure
Mole fraction of He = 0.33
Total pressure = 0.48 atm
Partial pressure of He = 0.33 × 0.48
Partial pressure of He = 0.16 atm
Therefore, the partial pressure of helium (He) in the mixture is 0.16 atm
Learn more about Partial pressure,
brainly.com/question/15712083
#SPJ4
Would silicone breast implants be cov-ered by the ucc article 2 warranties? does implan-tation of silicone gel implants constitute a sale ofgoods by the surgeon?
Since silicone breast implants need a security and the implanter is required to guarantee and replace the implant fixture by the business or manufacturer in accordance with their rules, silicone breast implants are protected by UCC Article 2 warranties.
As per the mandate, drugs, medications, stents, implants and other consumables and incidentals given to patients during a medical procedure or treatment cannot be considered to be the sale of commodities and are therefore subject to taxation under state laws.
Hence, breast implants are covered under UCC Article 2 warranties and silicone gel implantation does not constitute sale of goods via the surgeon.
To read more about uniform commercial code (ucc) visit:
https://brainly.com/question/15980446
#SPJ4
click on the muscle types
cardiac
weak
strong
elbow
skeletal
smooth
Answer:
cardiacskeletalsmoothExplanation:
Cardiac, skeletal and smooth muscles are the three types of muscles.
What is the dominant intermolecular force that determines the solubility of the amine hydrochloride salt of ethyl 4-aminobenzoate in water?.
The major intermolecular force that governs how soluble ethyl 4-benzoate's amine hydrochloride salt is in water is ion-dipole. In conclusion, (b) is the correct response.
Since water is polar and the amino hydrochloride salt of ethyl amino benzoate will be ionic, ion-dipole will be the predominant intermolecular force.
The electromagnetic forces between molecules of attraction or repulsion that operate between atoms and other types of nearby particles, such as atoms or ions, are examples of intermolecular forces (IMFs), also known as secondary forces.
The strongest intermolecular forces are ion-dipole forces. A powerful dipole-dipole interaction of a hydrogen atom and an extremely electronegative atom, like oxygen, nitrogen or fluorine is known as a hydrogen bond.
The complete question is:
What is the dominant intermolecular force that determines the solubility of the amine hydrochloride salt of ethyl 4-aminobenzoate in water?
a) ion-ion
b) ion-dipole
c) London dispersion
d) hydrogen bonding
Learn more about Intermolecular forces here:
https://brainly.com/question/13588164
#SPJ4
What is the difference between the sum of the measures of the interior angles in an octagon and the sum of the measures of the interior angles in a hexagon?.
The difference between the sum of the measures of the interior angles in an octagon and the sum of the measures of the interior angles in a hexagon is 360°.
Interior angle refers to the angle inside a polygon that is formed by two of its adjacent sides. The sum of the measures of the interior angles of a polygon is given by the equation:
180°(n - 2)
where n is the number of sides
An octagon is a polygon that has 8 vertices and 8 sides. The sum of the measures of the interior angles of an octagon is:
180°(8 - 2) = 180°(6) = 1080°
On the other hand, a hexagon is a polygon that has 6 vertices and 6 sides. The sum of the measures of the interior angles of an octagon is:
180°(6 - 2) = 180°(4) = 720°
Subtracting the sum of the interior angles of the two polygons,
1080° - 720° = 360°
Learn more about interior angles here: https://brainly.com/question/7888180
#SPJ4
If the oxygen is replaced by helium at the same temperature, how many kilograms of the latter will be needed to produce a gauge pressure of 7.10 atm?
The mass of the latter needed will be, 2.47 kg
Using the ideal gas equation:
where,
P = pressure of the gas
V = volume of gas
T = temperature of the gas
R = gas constant = 0.0821 L.atm/mole.K
w = mass of gas
M = molar mass of gas
The expression for two gases at the same temperature, and volume of gas will be:
where,
= pressure of O₂ gas = 8.20 atm
= pressure of He gas = 5.40 atm
= molar mass of O₂ gas = 32 g/mol
= molar mass of He gas = 4 g/mol
= mass of O₂ gas = 30.0 kg
= mass of He gas =?
Now put all the given values in the ideal gas equation, and we get:
(8.20 atm * 32 g/mol )/( 5.40 atm * 4 g/mol)
=2.47
Therefore, the mass of the latter needed will be, 2.47 kg
For more information on gauge pressure click on the link below:
https://brainly.com/question/6984092
#SPJ4
If I initially have a gas at a pressure of 12atm, a volume of 23 liters, and a temperature of 200 K, and then raise the pressure to 14 atm and increase the temperature to 300 K, what is the new volume of the gas
The new volume of the gas is 30 L.
P1=12 atm;V1=23 L
;T=200 K
P2=14 atm
;V2=?;mllT2=300 K
What is Charles Boyle's law?The difference between two initial known values of either temperature (T2) or volume (V2) is included in the computations of Charles' Law: According to Boyle's Law, the volume of a given volume of gas sustained at a certain temperature decreases inversely with the applied pressure while the temperature and mass are both constant.
Boyle's Law states that a gas's pressure and volume are both constant at a certain temperature. Increased pressure causes a reduction in volume while the temperature stays constant.
Charles' law ensures that the gas's pressure, volume, and temperature remain constant. Boyle's law, in contrast, guarantees that the gas's temperature and pressure will remain constant.
Learn more about Boyle's Law refer
https://brainly.com/question/26040104
#SPJ4
A mixture of reactants and products for the reaction shown below is at equillibrium in a 5.0L container. what would most likely happen to the the equilibrium if the volume in the container were reduced to 3.0L
N₂(g) + 3H₂(g) → 2NH₃(g)
A. more N2 and H2 would be produced until a new equilibrium position was reached
B. more N2,H2,NH3 would be produced until a new equilibrium position was reached
C. more NH3 would be produced until a new equilibrium position was reached
D. the concentrations of N2, H2, and NH3 would decrease until equilibrium has been reached again
If the volume is reduced, it then follows that; more N2,H2,NH3 would be produced until a new equilibrium position was reached.
What is the equilibrium situation?We know that a dynamic equilibrium occurs when the rate of forward reaction is equal to the rate of reverse reaction. In that case, the reactants disappear at the same rate as the products appear.
Now, we have the reaction; N₂(g) + 3H₂(g) → 2NH₃(g) In which case, the volumes to the left hand side of the reaction equation is smaller than the volume to the right hand side of the reaction equation.
If the volume is reduced, it then follows that; more N2,H2,NH3 would be produced until a new equilibrium position was reached.
Learn more about dynamic equilibrium:https://brainly.com/question/2363073
#SPJ1
Bbbhjhnhbdexvvgvhvhb Gn ghjjhh
what is meaning of product and reactant
Answer:
Reactants are starting materials and are written on the left-hand side of the equation. Products are the end result of the reaction and are written on the right-hand side of the equation.
What is the dissociation ratio of 1st dissociable proton of phosphoric acid at ph2.16, given the pka is 2.16 or ka is 6.92x10-3?
Phosphoric acid (H3PO4) has three dissociable protons, with the pKa's.
What is Phosphoric acid?With the chemical formula H3PO4, phosphoric acid, also known as orthophosphoric acid, monophosphoric acid, or phosphoric(V) acid, is an inorganic solid that contains phosphorus. Colorless and odorless, phosphoric acid is a substance. In its most common form, an 85% aqueous solution, it appears as a syrupy liquid that is colorless, odorless, and non-volatile. Considering that many fertilizers include it, it is a significant industrial chemical.
Acid makes up the substance. The phosphate ion PO results from the removal of all three H+ ions. H2PO, or hydrogen phosphate, is produced when one or two protons are removed, correspondingly. Organophosphate esters are produced by phosphoric acid.
To learn more about Phosphoric acid from the given links:
https://brainly.com/question/27983519
#SPJ4
The percent of heat radiation reflected by the different types of surfaces that earth has (i.e. snow, rock, forest, etc.) can be quantified or measured as?
The percent of heat radiation reflected by the different types of surfaces that Earth has (i.e snow, rock, forest, etc.) can be quantified or measured as Albedo.
Albedo is the percentage of sunlight that is reflected off of a surface. The higher the albedo, the more reflective the surface is. Different surfaces have different albedos. For example, fresh snow has a high albedo, while a forest has a low albedo.
The albedo of a surface can have a big impact on the climate. If a surface has a high albedo, it will reflect more heat and stay cooler. If a surface has a low albedo, it will absorb more heat and become warmer.
You can measure the albedo of a surface with a simple device called an albedometer. By measuring the amount of sunlight that is reflected off of a surface, you can calculate the albedo.
Surfaces with a high albedo are important in helping to regulate the Earth’s climate. They help keep the Earth cool by reflecting back sunlight.
Learn more on albedo here:
https://brainly.com/question/1335260
#SPJ4
A buffer consists of c5h5nc5h5n (pyridine) and c5h6n c5h6n . write the equation for the reaction that occurs when strong acid (h3o )(h3o ) is added to the buffer.
The balanced chemical equation for the reaction that occurs when strong acid H₃O⁺ is added to the buffer:
C₅H₅N + H₃O⁺ → C₅H₅NH⁺ + H₂O
A buffer can be defined as a substance that prevents the pH of a solution from changing by either releasing or absorbing H⁺ in a solution.
Buffer is a solution that can resist pH change upon the addition of an acidic or basic components and it is able to neutralize small amounts of added acid or base, pH of the solution is relatively stable.
This buffer is example of weak acid (C₅H₅NH⁺) and its conjugate base (C₅H₅N).
C₅H₅NH⁺ gain protons from strong acid H₃O⁺.
More about buffer: brainly.com/question/4177791
#SPJ4
Consider a sealed 1 litre container which holds room air at standard atmospheric pressure. if the container is compressed to a volume of 0.5 litres, what would be the partial pressure of oxygen (po2)?
Partial pressure = total pressure * volume of gas.
Partial pressure of oxygen (po2) = 1*0.5 = 0.5 atm L
what is partial pressure?
According to Dalton's Law of Partial Pressure, the total pressure of a gas mixture is equal to the sum of the partial pressures of all the constituent gases that make up the mixture. Dalton's Law of Partial Pressure has a straightforward equation.
It claims that the overall pressure exerted by the combination of non-reactive gases is equal to the sum of the partial pressures of the various gases. The pressure applied by each individual gas in a gas mixture is referred to as partial pressure.
Partial pressure = total pressure * volume of gas.
Thus, given here,
volume = 0.5 l
Pressure = 1 atm at STP
Therefore, partial pressure of oxygen = 1*0.5 = 0.5 atm L
To learn more about partial pressure from the given link below,
https://brainly.com/question/28116497
#SPJ4
why is it important to begin a experiment with a clean and dry crucible
What did you include in your response? Check all that apply.
Egyptians worked together to build the pyramids.
Quarries and ancient tools suggest that large slabs were created from rock beds.
The slabs were placed on sleds and pulled to the building site.
Oil was poured on the roadway to make the process easier.
This process is depicted in tomb paintings that date back to 1900 BCE.
All of the above apply.
Egyptians worked together to build the pyramids.
Quarries and ancient tools suggest that large slabs were created from rock beds.
The slabs were placed on sleds and pulled to the building site.
Oil was poured on the roadway to make the process easier.
This process is depicted in tomb paintings that date back to 1900 BCE.
How old are the pyramids in Egypt?The Giza Pyramids were designed to last forever, and they have. About 4,500 years ago, the enormous tombs from the Old Kingdom of Egypt were constructed.The pharaohs of Egypt believed that they would live forever as gods.How were pyramids constructed?The most likely scenario is that the Egyptians used a sloping and surrounding embankment made of brick, earth, and sand that was extended in height and length as the pyramid rose and up which stone blocks were towed using sledges, rollers, and levers.Why were the pyramids built?Pyramids were erected for cultic reasons. Egypt was one of the first civilizations to have this notion. They believed that everyone possessed a second self called the ka.After the death of the physical body, the ka had an everlasting existence.To learn more about pyramids visit:
https://brainly.com/question/13057463
#SPJ9
5g of copper(II)sulphate crystals are dissolved in water to form aqueous copper(II)sulphate solution. All the solution is then reacted with a 1.5 mol/dm³ of sodium hydroxide solution. A blue precipitate (solid) of copper(II)hydroxide was formed along with a colorless solution, sodium sulphate.
CuSO4 (aq)+ 2NaOH (aq) → Cu(OH)2 (s) + Na₂SO4 (aq)
1. Calculate the mass of the precipitate, Cu(OH)2 formed.
2. Calculate the volume of NaOH needed to react with 5 g of copper(II)sulphate.
3. Calculate the concentration (in mol/dm³) of sodium sulphate when 20 cm³ was formed.
What is the atomic mass of one mole of Na?
_____ g/mole
Answer:
23g/mole
Explanation:
And whereas one sodium atom has an approximate mass of 23 u, 1 mol of Na atoms has an approximate mass of 23 grams. One mole of a substance has the same mass in grams that one atom or molecule has in atomic mass units.
Two cars A and B are moving with velocities of 10m/s and 6m/s in the same direction respectively. What is the relative velocity of Car A with respect to Car B.
The relative velocity of Car A with respect to Car B, Vab = 16m/s.
Equation :Given,
Va = 10m/s
Vb = 6m/s
Vab = ?
So,
To find Vab of the car A and car B
We know the car A velocity and as both the car the in same direction so to to know average speed or velocity car B velocity taken in negative.
So,
We can put formula,
Vab = Va - (-Vb)
Vab = 10m/s - (-6m/s)
Vab = 16m/s
What is relative velocity?The velocity of an object when compared to another observer is known as its relative velocity. It is the rate at which one object's relative position changes in relation to another object over time.
To know more about velocity :
https://brainly.com/question/19260269
#SPJ9
What byproduct of fermentation creates the characteristic holes in swiss cheese? select one:
a. carbon dioxide
b. lactic acid
c. ethyl alcohol
d. acetic acid
The byproduct of fermentation that creates the characteristic holes in swiss cheese is a. carbon dioxide.
Swiss cheese is a cheese made in Switzerland.
Swiss cheese is, usually, a semihard cheese made from cows milk with a characteristic holes.
Fermentation of milk is a metabolic process in which lactic acid and carbon dioxide are produced from sugar lactose:
C₆H₁₂O₆ → CH₃CHOHCOOH + C₂H₅OH + CO₂
Carbon dioxide (CO₂) is a gas. It gets stuck in swiss cheese and it makes bubbles, which make holes.
Fermentation is a way of extracting energy from molecules and it is the oldest metabolic pathway.
More about fermentation: brainly.com/question/11554005
#SPJ4
Please help
use bond energies to determine the energy change for the following reaction: H2(g)+ Cl2(g) ⟶ 2HCl(g)
The heat of reaction is obtained as 190 kJ/mol .
What is the heat of reaction?The term heat of reaction is used to show the energy that is absorbed or emitted in a reaction. Recall that a reaction is exothermic when heat is given out and the reaction is endothermic when heat is absorbed.
In this case;
H- H bond energy = 436 kJ/mol
Cl - Cl bond energy = 242 kJ/mol
H - Cl bond energy = 432 kJ/mol
Then we know that;
ΔH reaction = ∑H products - ∑H reactants
We now have;
ΔH reaction = 2(432 kJ/mol) - [242 kJ/mol + 432 kJ/mol]
ΔH reaction = 864 kJ/mol - 674 kJ/mol
ΔH reaction = 190 kJ/mol
Learn more about heat of reaction:https://brainly.com/question/16648056
#SPJ1
When compounding a sterile product, you should keep all supplies and manipulations at least ________ from all walls (including the filter) and the front edge of the hood.
When compounding a sterile product, you should keep all supplies and manipulations at least 6 inches within the hood from all walls (including the filter) and the front edge of the hood.
What does a sterile compounding room mean?
A well-lit buffer space, an ante area, a storage area for sterile supplies and products, and both are secondary engineering controls are all included in the sterile compounding area. An space where a PEC is situated and where operations like preparation, compounding, and staging of CSPs take place is referred to as a buffer area (or "cleanroom").
When preparing a sterile product, you must keep all materials and operations at least 6 inches away from the hood's front edge, all walls (including the filter), and all manipulations.
To learn more about sterile compounding room from the given link below,
https://brainly.com/question/22978608
#SPJ4
Which reaction pathways shows the effect a catalyst (black) might have on an uncatalyzed reaction (gray)?
Option D) is the correct option. The role of the catalyst is to provide a new pathway for the reaction to take place which has lower activation energy.
The function of the catalyst is to change the rate of reaction without interfering with the reaction itself or without getting consumed in the reaction itself.
Catalyst only affects the activation energy of the reaction and does not change the enthalpy difference of the reaction. In other words, the final and initial energy of the product and reactant respectively remains the same even in presence of the catalyst.
In options C) and B) the final and initial energy of the reaction is different for both pathways, hence these are incorrect.
In option A) the activation energy of the uncatalyzed reaction is less than the catalyzed one which is not possible.
Therefore Option D) is the correct reaction pathway showing the effect of catalyst on an uncatalyzed reaction.
LEARN MORE ABOUT CATALYSTS HERE: https://brainly.com/question/847624
#SPJ4
Your question was incomplete. Please check below the full content
A marathon is 26.2 miles long. How long is a marathon in meters?
Answer:
42195 meters
Answer:
26.2 miles = 42164.81
Explanation:
1 mile is 1609.34 meters so multiply that by 26.2 miles and you have your answer
What happens if some ethyl alcohol of density 790 kg/m3 is poured into the container after the ice cube has melted?
The layer of ethyl alcohol forms on the surface if some ethyl alcohol is poured into the container after the ice cube has melted.
The density of a substance is its mass per unit volume.
The SI derived unit for density is the kilogram/cubic meter, but chemist usually use gram per cubic centimeter.
Ethyl alcohol has lower density of water, so it would form on the surface.
The density of the water is an around 1000 kg/m³.
Mass is a fundamental measure of the amount of matter in the object.
Volume is the amount of space that a substance occupies.
More about density: brainly.com/question/1354972
#SPJ4
If the fractional conversion in an ester interchange reaction is 0.99999, what would be the average degree of polymerization (pn or dp) of the polyester produced?
The fractional conversion in an ester interchange reaction is 0.99999
The average degree of polymerization (pn or dp) of the polyester produced = 0.99999/1 *100 = 99.999
What is degree of polymerization?
The quantity of monomer units in the polymer is known as the degree of polymerization (DP or Xn). It is determined as the molecular weight of the repeat unit divided by the molecular weight of the polymer. The two primary methods for measuring DP are number average DP and weight average DP.
This quantity of repeating units varies based on the type of polymer and its molecular weight and aids in determining the physical and chemical properties of a polymer. The degree of polymerization (DP), or the number of repeating units, is therefore calculated and is crucial in the polymer business.
The overall average degree of polymerization (pn or dp) of the polyester produced = 0.99999/1 *100 = 99.999
To learn more about degree of polymerization from the given link below,
https://brainly.com/question/15517980
#SPJ4
PLEASE HELP ASAP ILL RATE U 5 STARS!!
Using the periodic table, The Bohr - Rutherford diagram of each of the elements is before bonding and after bonding is attached below.NH[tex]_{3}[/tex] ( ammonia ) is a covalent bond.
Ammonia is a covalent compound because in the formation of ammonia the bond between nitrogen and three hydrogen is formed by the sharing of electron.
Covalent bond is formed by sharing of electron between atoms. Ionic bond is formed when one atom loses electron and other atom gain the electron or by the transfer of electron from one atom to another.
Hence,In the case of ammonia a covalent bond is formed and the electronegativity difference between nitrogen and hydrogen is not big enough to make a covalent bond.
To learn more about Bohr-Rutherford diagrams here
https://brainly.com/question/14586294
#SPJ1
What is the iupac name of the following compound . vinylcyclohexane b. ethynylcyclohexane c. allylcyclohexane d. acetylcyclohexane
IUPAC name of vinylcyclohexane is vinylcyclohexane, ethynylcyclohexane is 1-ethynylcyclohexane, allylcyclohexane is prop-2-enylcyclohexane and of acetylcyclohexane is 1-Cyclohexylethan-1-one.
IUPAC stands for International Union of Pure and Applied Chemistry. It is the universally-recognized authority on chemical nomenclature. It is based on naming the molecule's longest chain of carbons connected by single bonds, whether in a continuous chain or in a ring.
It creates a standardized way to name chemical compounds. The use of Common names can lead to confusion and misinformation.
IUPAC name of vinylcyclohexane is 1-ethenylcyclohexane.
IUPAC name of ethynylcyclohexane is 1-ethynylcyclohexane.
IUPAC name of allylcyclohexane is prop-2-enylcyclohexane.
IUPAC name of acetylcyclohexane is 1-Cyclohexylethan-1-one.
To know more about IUPAC Naming refer to the link:
https://brainly.com/question/27888104
#SPJ4
Why is the Heisenberg uncertainty principle true at the atomic level?
The Heisenberg uncertainty principle is true at the atomic level because we cannot simultaneously determine the accuracy of both velocity and the position of a particle.
What is the Heisenberg uncertainty principle?Heisenberg's Uncertainty Principle states that there is inherent uncertainty in the act of measuring a variable of a particle.
The Heisenberg uncertainty principle was found to be contrary to classical Newtonian physics which stipulates that all variables of particles to be measurable to an arbitrary uncertainty given standard equipment.
The Heisenberg uncertainty principle is true at the atomic level because we cannot simultaneously determine the accuracy of both velocity and the position of a particle.
Learn more about Heisenberg uncertainty principle :
https://brainly.com/question/11488878
#SPJ1
