the presence of a plane of symmetry in a molecule is a quick way of determining whether a molecule is chiral or not. which structure(s) contain a plane of symmetry? a 5 carbon ring has a double bond between carbons 1 and 2. there is a wedged bond to o h on carbon 3. a 5 carbon ring has an wedged bond to hydroxy on carbon 1. a 5 carbon ring has a wedged bond to o h on carbon 1 and carbon 3. which molecule is chiral? a 5 carbon ring has a wedged bond to o h on carbon 1 and carbon 3. a 5 carbon ring has a double bond between carbons 1 and 2. there is a wedged bond to o h on carbon 3. a 5 carbon ring has a wedged bond to hydroxy on carbon 1.

When temperature of a reaction mixture rises as the energy is released during an exothermic process. Inside an endothermic reaction, its temperature drops as energy is absorbed.

Enthesogenic responses Heat is taken in. 1) Photosynthesis: In order to transform carbon water and carbon dioxide and oxygen, plants must absorb heat sunlight energy. 2) Heating an egg: The egg is cooked by absorbing heat energy from the pan.

Endothermic relates to any chemical reaction that absorbs heat from the environment. This energy that has been absorbed provides the activation energy for the process. This type of reaction is distinguished by its frigid feeling.

To know more about endothermic visit:

brainly.com/question/1371775

#SPJ1

Yes, you can determine if the temperature inside a freezer is below 0°C by using a glass of liquid water. Here's how:

However, it is not possible to determine the exact temperature of the freezer by just using a glass of water. The temperature can only be estimated by observing the state of the water and making a rough guess based on the extent of the freezing.

For example, if the water is just starting to freeze, then the temperature could be close to 0°C. If the water has mostly frozen, then the temperature could be closer to -10°C. However, without a thermometer, the exact temperature cannot be determined.

To learn more about temperature refer this link

https://brainly.com/question/11384928

#SPJ4

A net ionic equation describing the total reaction between sodium hydroxide and phosphoric acid (h3po4) in aqueous solutions.

H3PO4(aq) → Na3PO4(aq) + 3H2O(l)

To write the net ionic equation, we need to first write the balanced ionic equation, which shows all the ions in solution that participate in the reaction. The ionic equation for the reaction is:

3Na+(aq) + 3OH-(aq) + H3PO4(aq) → Na3PO4(aq) + 3H2O(l)

Next, we cancel out the spectator ions, which are the ions that appear on both sides of the equation and do not participate in the reaction. In this case, the spectator ions are the sodium ions (Na+) and the hydroxide ions (OH-). The net ionic equation is then:

H3PO4(aq) → Na3PO4(aq) + 3H2O(l)

This equation shows the actual chemical change that occurs in the reaction, which is the transfer of a proton (H+) from the phosphoric acid to the hydroxide ion, forming water and the phosphate ion.

Learn more about ionic equation here:

https://brainly.com/question/29299745

#SPJ4

The concentration of the compound at 50.9°C is 0.098 g/mL.

Concentration is the act of focusing one's attention on a specific task or activity. It is the ability to focus on one thing at a time, while blocking out distractions. It is a skill that can be developed over time and with practice. Concentration is important in many areas of life, including studying, work, and sports. It is also a key factor in achieving success in any endeavor.

At 50.9°C, the mass of the boat + solution was 0.934 g and the mass of the boat + dry was 0.836 g.
The difference between the two masses is 0.098 g.
This difference is equal to the mass of the solute (in this case, the compound) that was added to the boat. Thus, the concentration of the compound at 50.9°C is 0.098 g/mL.

To learn more about concentration
https://brainly.com/question/28564792
#SPJ1

The balanced chemical reaction is given as follows:

(NH₄)₃PO₄ (aq) + AI(NO₃)₃ (aq) → AIPO₄ (s) + 3NH₄NO₃ (aq)

A balanced chemical equation is one that has the same number of atoms of each type in the reaction on both the reactant and product sides. In a balanced chemical equation, both the mass and the change are equal.

The law of conservation of mass, which states that "the total mass of all the products of reaction in a chemical reaction equals the total mass of all the reactants," is satisfied by balancing chemical equations.

Thus, A solution of ammonium phosphate is mixed with a solution of aluminum nitrate. If aluminum phosphate is insoluble in water, its reaction is  (NH₄)₃PO₄ (aq) + AI(NO₃)₃ (aq) → AIPO₄ (s) + 3NH₄NO₃ (aq).

To learn more about the balanced chemical reaction, follow the link;

https://brainly.com/question/30230799

#SPJ9

Loss of habitat and breeding grounds of the monarch butterfly due to development is the option that is not due to resource availability.

Interspecies competition refers to a form of competition between different species that are competing for the same limited resources such as food, water, shelter or other necessities required for their survival and reproduction. This competition can occur among individuals of the same species (intraspecific competition) or different species (interspecific competition). In the context of ecology, interspecies competition can be an important factor influencing the distribution and abundance of species in an ecosystem.

To know more about Interspecies competition, visit:

https://brainly.com/question/19826046

#SPJ1

Avogadro's number can be multiplied by the number of moles to determine the number of atoms in 4.48 L of He gas at STP is  1.20 x 10²³ atoms.

Option D is correct.

                       N = N × n

                = 6.02 x 10²³ × 0.200 mol

                            = 1.20 x 10²³ atoms.

Therefore, the answer is 1.20 x 10²³ atoms.

In physics and chemistry, Avogadro's number is a fundamental constant that indicates the number of atoms, ions, or molecules in one mole of a substance. It is exactly 6.02214076 x 10²³ particles per mole, as defined.

Standard Temperature and Pressure is spelled STP. For the purpose of measuring the physical properties of gases, STP is utilized as a reference condition. It has a temperature of 0° Celsius and a pressure of one atmosphere.

Learn more about STP :

brainly.com/question/29796637

#SPJ1

The coefficients in front of the chemical formulas indicate the relative amounts of the reactants and products, and the subscripts within the chemical formulas indicate the ratios of atoms of each element present.

A chemical equation is a statement using chemical formulas to describe the identities and relative amounts of the reactants and products involved in a reaction. A chemical equation typically consists of the chemical formulas of the reactants (the substances being reacted), separated by an arrow, followed by the chemical formulas of the products (the substances produced by the reaction).

For example, the balanced chemical equation for the reaction between hydrogen gas (H2) and oxygen gas (O2) to form water (H2O) is:

2H2 + O2 → 2H2O

This equation indicates that two molecules of hydrogen react with one molecule of oxygen to form two molecules of water. The coefficients in front of the chemical formulas indicate the relative amounts of the reactants and products, and the subscripts within the chemical formulas indicate the ratios of atoms of each element present.

To learn more about  Chemical equation :

https://brainly.com/question/30087623

#SPJ4

None of the aforementioned choices are appropriate since moles per litre (mol/L) and moles per millilitre (mol/mL) are measures of concentration while metres (m) is a unit of length or distance.

The unit of concentration known as moles per litre (mol/L or M) is frequently used in chemistry. It expresses the quantity of a substance in moles that has dissolved in a litre of solution. The concentration of chemical solutions, including acids, bases, salts, and organic molecules, is frequently described using this unit. Because it offers a means of standardising a solution's concentration, the idea of moles per litre is crucial for enabling precise and repeatable measurements of reactants and products in chemical processes. By dividing the number of moles of solute by the volume of the solution in litres, one can determine the molar concentration of a solution.

Learn more about moles per litre here:

https://brainly.com/question/30169960

#SPJ4

F-1 would have a larger radius because it has one less electron than F, reducing the electrostatic attraction between the nucleus and electrons, making the atom larger.

The radius of an atom is determined by the distance between the nucleus and the outermost electron shell. The number of electrons in the outermost shell, or valence electrons, determines the size of the atom. In this case, F has 9 electrons in its outermost shell, while F-1 has 8 electrons. With one fewer electron, F-1 has less electrostatic attraction between the nucleus and electrons, and thus a larger radius.Valence electrons are the electrons in the outermost shell of an atom that participate in chemical reactions. The number of valence electrons an atom has determines its reactivity and how it will bond with other atoms

Learn more about valence electrons here:

https://brainly.com/question/1255220

#SPJ4

The concentration in ppm is 5.0 ppm.

Ppm stands for "parts per million." It is a unit of measurement that is used to express the concentration of a substance in a mixture. In ppm, the amount of a substance is expressed as the number of parts of the substance per million parts of the mixture.

It is important to note that ppm is a relatively small unit of measurement, and that concentrations in the range of thousands or even millions of ppm can still be harmful to humans and the environment.

Given that the unit microgram/ gram is the same as the ppm then we have that the concentration could be 5.0μg/g or 5.0 ppm

Learn more about PPM:https://brainly.com/question/14598158

#SPJ1

If the temperature of the gas is underestimated, the value of the ideal gas constant (R) will be overestimated because R is inversely proportional to the temperature.

The ideal gas law describes the behavior of gases under certain conditions, assuming that they behave as an ideal gas. The equation relates the pressure, volume, temperature, and number of moles of a gas, and is written as PV = nRT, where P is the pressure of the gas, V is its volume, n is the number of moles of gas, T is the temperature, and R is the ideal gas constant.

The ideal gas constant, R, is a proportionality constant that relates the physical properties of the gas to its behavior as an ideal gas. The value of R depends on the units used for pressure, volume, and temperature, and it can be calculated using the equation R = PV/nT.

The value of R is inversely proportional to the temperature of the gas. This means that as the temperature of the gas decreases, the value of R increases, and vice versa. Therefore, if the temperature of the gas is underestimated, the calculated value of R will be higher than it should be. This can lead to errors in other variables that are calculated using the ideal gas law, such as the pressure, volume, or number of moles of gas.

It's important to note that the ideal gas law is only an approximation, and it may not accurately describe the behavior of real gases under all conditions. However, the ideal gas law is a useful tool for understanding the behavior of gases, and it can be used to make predictions about the behavior of gases in various situations, as long as the conditions are close enough to those of an ideal gas.

To learn more about ideal gas law Click here:

brainly.com/question/28257995

#SPJ4

We can use the following formula to determine the amount of food colouring present in a standard solution: C1V1 = C2V2. As a result, the final standard solution's food colouring concentration is 0.02676% (v/v).

A homogeneous mixture of two or more substances, in which the solute is uniformly dispersed in the solvent, is referred to as a solution. Solutions exist in a variety of forms, including gases, liquids, and solids. They are crucial in a number of disciplines, such as chemistry, medicine, and technology. To create a solution, one must correctly measure the amounts of the solute and solvent and then completely combine them to create a homogeneous mixture. A solution's concentration can be stated in a number of ways, including molarity, molality, and percent by mass or volume. Solutions can differ from their component elements and compounds in terms of their boiling and melting points, as well as their appearance, flavour, and odour.

Learn more about Solution here:

https://brainly.com/question/2709960

#SPJ4

The theoretical yield of CO2 in moles when there is 63.2 moles of O2 present is 63.2 moles.

A chemical reaction is a process in which one or more substances, called reactants, are converted into one or more different substances, called products. This process involves the breaking and forming of chemical bonds between atoms and/or molecules, resulting in a change in the chemical composition of the substances involved.

Chemical reactions can be classified into several different types based on the changes that occur during the reaction, including:

Synthesis or combination reactions: where two or more reactants combine to form a single product.

Decomposition reactions: where a single reactant breaks down into two or more products.

Single replacement or displacement reactions: where one element replaces another element in a compound, resulting in the formation of a new compound.

Double replacement or displacement reactions: where two compounds exchange ions or atoms to form two new compounds.

Acid-base reactions: where an acid and a base react to form a salt and water.

Assuming that the balanced chemical equation is:

C + O2 → CO2

We can see that the stoichiometric ratio between O2 and CO2 is 1:1. This means that for every 1 mole of O2 consumed, 1 mole of CO2 is produced. Therefore, if there are 63.2 moles of O2 present, the theoretical yield of CO2 would also be 63.2 moles.

So, the theoretical yield of CO2 in moles when there is 63.2 moles of O2 present is 63.2 moles.

To know more about moles visit:

https://brainly.com/question/15209553

#SPJ1

Answer:ionic radius increases down the

Explanation:

Answer:

3.784

Explanation:

Answer: 3.784

Explanation:

No, the bulb is not used to help dispense the liquid from the pipette.

The bulb is used to create a vacuum which is used to draw liquid into the pipette. The liquid is then dispensed by releasing the vacuum, allowing the pressure of the liquid to push it out through the tip of the pipette. The equation for this is PV = nRT, where P is the pressure, V is the volume, n is the amount of substance, R is the universal gas constant, and T is the temperature.A pipette is a laboratory tool used to measure and transfer accurate volumes of liquid. It is composed of a long, thin tube that is connected to a bulbous reservoir at one end.

learn more about universal gas constant Refer:brainly.com/question/16979521

#SPJ4

1 mole is equal to 6.023 × 10 ²³ molecules. 0.182 moles of barium are in a 25.0 g sample of barium.

The term mole is defined as the amount of substance of a system which contains as many elementary entities.

One mole of any substance is equal to 6.023 × 10²³ units of that substance such as atoms, molecules, or ions. The number 6.023 × 10²³ is called as Avogadro's number or Avogadro's constant.

The mole concept can be used to convert between mass and number of particles.

I mole of any molecule = 6.023 × 10 ²³

1 mole of barium = 137.328g

To calculate moles, divide mass by molar mass yields number of moles.

25.0g barium × 1mol barium 137.328g barium

= 0.182mol barium

Thus, 0.182 moles of barium are in a 25.0 g sample of barium.

To learn more about the mole, follow the link;

https://brainly.com/question/26416088

#SPJ1

The statement "you're letting the cold in" is technically false. When you open a door on a cold winter night, you are allowing the warm air inside to escape, which can cause a drop in temperature. However, you are not necessarily "letting the cold in." The cold air is already present outside, and it will continue to exist whether the door is open or closed. In fact, the temperature inside your home may only change slightly, and it will depend on many factors such as the size of the room, the amount of insulation, and the efficiency of the heating system.

The concept of heat transfer, which is the movement of heat from one place to another, helps explain why this statement is false. When you open the door, the warm air inside will move to the cold air outside, which is known as conduction. This transfer of heat will cause the temperature inside to drop until the heat source can warm up the air again. This process will continue as long as the door remains open. So, while opening the door on a cold winter night can cause a drop in temperature, it is not because you are "letting the cold in." Instead, it is because you are allowing the warm air inside to escape.

Parts of the population were liberated from the need on food collecting and hunting as a result of the rivers' provision of an abundance of drinkable water and fertile land to start cultivating food crops.

For more information on local river and community development kindly visit to

https://brainly.com/question/886777

#SPJ1

Converting the volumes to litres is not necessary. Any volume measurement is acceptable as long as it is utilized consistently on both sides.

The following formula can be used to create a specific volume of a diluted solution from a stock solution. Where: V1 = Volume of stock solution required to make the new solution, C1V1 = C2V2. C1 is the stock solution's concentration. V2 is the new solution's final volume.

However, as was already said, you need to know the volume in litres if you're trying to figure out how many moles of solute are present.

Data retrieved from the query include the following:

C1 = 2.46 M

V1 =?

C2 = 0.758 M

V2 = 275 mL = 275/1000 = 0.275L

We can definitely determine the volume of the initial solution using the dilution formula C1V1 = C2V2.

C1V1 = C2V2

2.46 x V1 = 0.758 x 0.275

Divide both side by 2.46

V1 = (0.758 x 0.275) /2.46

V1 = 0.0847L

Therefore, 0.0847L volume of a 2.46 Magnesium nitrate (Mg(NO3)2)

solution would be needed to make 275 mL of a 0.758 M solution by

dilution

Learn more about dilutions here:

https://brainly.com/question/28997625

#SPJ1

The Gulf region, which is in the wet-dry tropics (savanna), experiences year-round temperatures of hot to very hot.

Looking at average temperatures and precipitation through time is the easiest way to characterize a climate. The amount and type of precipitation, sunshine hours, typical wind directions and speeds, the number of days above freezing, weather extremes, and the geography of the area are additional factors that can be used to describe climate. The Northwest Coastal, High Plains, Midwest, Mid-Atlantic, Southeast, South, and Southwest are the seven principal climate regions of the United States. As a result of the fact that these states have similar weather patterns throughout the year, they are included in each climate zone for the United States.

Learn more about climate here:

https://brainly.com/question/10440860

#SPJ4

To determine the concentration of the Fe2+ solution, we can use the following equation for the reaction between Fe2+ and Ce4+ ions:[tex]Fe2+ + Ce4+ → Fe3+ + Ce3+[/tex]

We know the volume and molarity of the Ce4+ solution (0.962 M), and the volume of Ce4+ solution required to reach the equivalence point (24.995 mL). The volume of Ce4+ solution can be used to find the number of moles of Ce4+ ions present in the solution.

First, convert the volume of Ce4+ solution to liters:

[tex]24.995 mL * (1 L / 1000 mL) = 0.024995 L[/tex]

Next, use the molarity and volume to find the number of moles of Ce4+ ions:

[tex]0.962 M * 0.024995 L = 0.023724 moles of Ce4+[/tex]

Since the equivalence point is reached, the number of moles of Ce4+ ions added is equal to the number of moles of Fe2+ ions in the original solution. We can now use this information to find the concentration of the Fe2+ solution.

First, we need to determine the total volume of the Fe2+ solution and water mixture.

Volume of Fe2+ solution = 6.685 mL

Volume of water = 45 mL

Total volume = 6.685 mL + 45 mL = 51.685 mL = 0.051685 L

Next, use the number of moles of Fe2+ ions and the total volume to find the concentration:

[tex]0.023724 moles / 0.051685 L = 0.462 M[/tex]

So, the concentration of the Fe2+ solution is 0.462 M.

To learn more about concentration refer to this link

https://brainly.com/question/10720472

#SPJ4

The entropy of system 1, consisting of box A alone, will remain constant, while the entropy of system 2, consisting of both boxes A and B, will be greater due to the increase in the number of available microstates.

When two identical boxes of matter, A and B, are in thermal contact but cannot exchange materials, they will eventually come to thermal equilibrium. At thermal equilibrium, the two boxes will have the same temperature, and their individual entropies will be equal.

If we consider system 1, which consists of box A alone, its entropy will remain constant as it is an isolated system. However, if we consider system 2, which consists of both boxes A and B, the total entropy of the system will increase because there are now more ways for energy to be distributed between the two boxes. In other words, the addition of box B provides more microstates or configurations for the system to occupy, and hence the entropy of the combined system will be greater than that of system 1.

Therefore, we can say that the entropy of system 2, consisting of both boxes A and B, will be greater than the entropy of system 1, consisting of box A alone, as a result of the greater number of available microstates in system 2. This increase in entropy is a manifestation of the second law of thermodynamics, which states that the entropy of an isolated system will always tend to increase over time.

To learn more about entropy Click here:

brainly.com/question/13135498

#SPJ4

Option C. is a molecule of hydrocarbon.

Hydrocarbons are organic compounds made up of only hydrogen and carbon atoms. They are the building blocks of organic chemistry and are the main component of fossil fuels such as coal, oil, and natural gas.

Molecules of hydrocarbons can be simple or complex, and can exist as gases, liquids, or solids. Some common examples of hydrocarbon molecules include methane (CH₄), ethane (C₂H₆), propane (C₃H₈), and butane (C₄H₁₀). Alkanes, alkenes, and alkynes are all types of hydrocarbons that have different chemical and physical properties based on the arrangement of their atoms.

Therefore, the correct answer is as given above. It could then be concluded that only option C is made up of hydrogen and carbon atoms.

learn more about hydrocarbon: https://brainly.com/question/3551546

#SPJ1

Answer:

1.83 moles

Explanation:

The question is: how many moles of "Na" are in 42 g of Na, right?

1 mole of Na = 23 g

so # mole = (1 mole / 23 g) x 42g = 1.82 moles

2.0 M K2SO4 will exhibit the greatest increase in boiling point compared to plain water.

Boiling point is the temperature at which a liquid changes into a gas. It is the temperature at which the vapor pressure of the liquid is equal to the atmospheric pressure. Boiling point is an important physical property of a substance and is dependent on the pressure applied to the liquid. Generally, the higher the pressure, the higher the boiling point of a liquid. For example, water boils at 100°C (212°F) at sea level, but at higher altitudes, where atmospheric pressure is lower, water boils at lower temperatures. The boiling point of a substance is also affected by the presence of other compounds in the liquid, such as impurities. Boiling point is an important property used to identify and characterize materials, and is typically measured with a thermometer.

To learn more about boiling point

https://brainly.com/question/40140

#SPJ1

This means that the balance equation for the reaction of NH₄Cl (ammonium chloride) producing NH3 (ammonia) and HCl (hydrochloric acid) is: NH₄Cl (s) → NH₃ (g) + HCl (g).

A balanced chemical equation is a representation of a chemical reaction that shows the same number of atoms of each element on both the reactant and product sides of the equation. To balance a chemical equation, the following steps can be followed:

Learn more on balanced equations here: https://brainly.com/question/11904811

#SPJ1

The balanced equation for the reaction is:

NH₄Cl(s) -> NH₃(g) + HCl(g)

The law of conservation of matter which states that matter can neither be created nor destroyed during a chemical reaction but can be transferred from one form to another.

We can balance chemical equation by obeying the above law.

Now, we shall write the balance equation.

Ammonium chloride -> Ammonia + Hydrogen chloride

NH₄Cl(s) -> NH₃(g) + HCl(g)

Reactant:

Product:

We can see that the atoms of the elements on both sides of the equation are equal, then the equation is balanced

Learn more about balancing equation:

https://brainly.com/question/12192253

#SPJ1

The crystallization step of recrystallization removes soluble impurities from a solid mixture. When a solid is dissolved in a solvent and then allowed to cool, the solubility of the solid in the solvent decreases and the solid crystallizes out of the solution.

Soluble impurities, which are typically more soluble in the solvent than the desired compound, will remain in solution or be incorporated into the crystal lattice of the impure crystals. As a result, the crystals that form during the crystallization step will have a higher purity than the initial solid mixture. Further purification can be achieved through multiple rounds of recrystallization using different solvents or by additional purification methods such as chromatography.

Find out more about  chromatography.

brainly.com/question/30630528

#SPJ4

the actual volume of water measured out is 10.02 ml, which is slightly higher than the intended volume of 10 ml. This could be due to various factors, such as the presence of air bubbles or human error in reading the pipet

To determine the actual volume of water measured out, we need to use the given information about the mass and density of water.

First, we can use the density formula to calculate the mass of 10 ml of water:

density = mass / volume

Rearranging the formula, we get:

mass = density x volume

Substituting the given values, we get:

mass = 0.9978 g/ml x 10 ml = 9.978 g

This means that the mass of the water measured out is 9.978 g.

However, the question states that the mass of the measured water is 9.990 g. This means that there is an additional mass of water that was inadvertently added or that there is an error in the measurement.

To find the actual volume of water measured out, we can use the following formula:

actual volume = measured mass / density

Substituting the given values, we get:

actual volume = 9.990 g / 0.9978 g/ml = 10.02 ml

Therefore, the actual volume of water measured out is 10.02 ml, which is slightly higher than the intended volume of 10 ml. This could be due to various factors, such as the presence of air bubbles or human error in reading the pipet

To know more aboutactual volume   click here:

brainly.com/question/24179676

#SPJ4