Enzymes that aid in protein, lipid, and carbohydrate digestion are produced by the pancreas. Additionally, a chemical that neutralizes stomach acid is produced there. The small intestine is where these enzymes and bile enter and aid in the digestion of the meal through specialized passageways known as ducts. Additionally, the liver aids in the bloodstream's processing of nutrients.
Food is broken down into components for circulatory absorption by the process of digestion, which involves both mechanical and enzymatic means. Proteins, carbs, and lipids are the three macronutrients in the diet that must be digested in order to be absorbed. The process of physically and enzymatically dissolving food into components for circulatory absorption is called digestion. Proteins, carbs, and lipids are the three macronutrients in the diet that must be digested in order to be absorbed.
To learn more about Food, follow the below link:
https://brainly.com/question/25884013
#SPJ4
100 ml of a 0.300 m solution of agno3 reacts with 100 ml of a 0.300 m solution of hcl in a coffee-cup calorimeter and the temperature rises from 21.80 °c to 23.20 °c. assuming the density and specific heat of the resulting solution is 1.00 g/ml and 4.18 j/g ∙ °c, what is the mass of the reaction solution?
Molarity H°rxn = Qrxn/(number of moles of AgNO3) = (1170.4 J)/(0.03 mol) ≈ 39013.33 J/mol = 39.013 kilojoules.
How do mol and molarity work?The term "Molarity" is derived from the unit of measurement called a mole, which is used to describe chemical substances. Calculating how amount of substance present in a certain chemical solution is done using a concept known as molarity, commonly known as the molar concentration of a solution.
Using the equation Q = m.c.T, Q =??? J, where Q is the quantity of heat produced by the solution, we can figure out the amount of warmth (Q) released from the solution.
The specific heat capacity (c = 4.18 J/g°C) of the solution determines its mass, or m, which is equal towards its density times volume, and (1.0 g/mL) divided only by volume, or 200 g.
(23.20 vs. 1.4) degrees Celsius is the difference in temperature (T) between the initial and final temperatures.
∴ Q = m.c. T = 200 g (at 4.18 J/g°C and 1.4 °C, respectively) = 1170.4 J. H°rxn = Qrxn/(number of moles of AgNO3)
The number of moles of immediately following in a solution that has a volume of 1.0 liters is known as molarity (M).
M is equal to (number of moles of AgNO3)/(volume of a solution (L)).
To know more about Molarity visit:
https://brainly.com/question/8732513
#SPJ4
a. What is the electron-domain (charge-cloud) geometry of BrF5? Enter the electron-domain geometry of the molecule.
b. What is the molecular geometry of BrF5?
c. Ignoring lone-pair effects, what is the smallest bond angle in BrF5?
d. Which choice best describes the polarity of BrF5?
The molecule is polar and has polar bonds.
The molecule is nonpolar and has polar bonds.
The molecule is polar and has nonpolar bonds.
The molecule is nonpolar and has nonpolar bonds.
e. Of the molecules below, only ________ is polar.
H2
SiS2
CH4
AsH3
PF5
(a) Electron domain geometry - Octahedral.
(b) Molecular geometry - Square pyramidal.
(c) Smallest bond angle - 90°
(d) The polarity of BrF₅, best choice is: The molecule is polar and has polar bond.
(e) AsH₃ is polar molecule.
What is polar and non-polar molecule?A molecule's valence shell electrons are shown in a very simple manner via a Lewis structure. It serves as a visual representation of how the electrons surrounding certain molecules' atoms are positioned.
It demonstrates the bonds that exist between a molecule's atoms and its lone pairs of electrons. When used in conjunction with hybrid orbitals, Lewis structures can also be helpful in predicting molecular geometry.
(a) Electron domain geometry - Octahedral.
(b) Molecular geometry - Square pyramidal.
(c) Smallest bond angle - 90°
(d) The polarity of BrF₅, best choice is: The molecule is polar and has polar bond.
(e) AsH₃ is polar molecule.
To know more about geometry refer to:
https://brainly.com/question/20274710
#SPJ1
31. Applying Concepts Element Q forms
compounds with element X and with element Z.
Write the formulas for these two compounds.
formula be for these two compounds
—HELP!!! ASAP
On a camping trip, Susan decides to cook smores with her family. Describe all possible forms of heat transfer that Susan may come into contact with.
The ways that Susan may come into contact with heat transfer is by;
ConductionConvectionRadiationWhat is heat transfer?When we are talking about heat transfer, what we are looking at is the transfer of heat from one point to the other. We know that the transfer of heat would have to do with the temperature difference between the materials that are involved. This is because, heat is defined as the form of energy that does exist any time that we have a temperature difference two bodies.
When you are cooking, the three types of heat transfer would come into play and these are conduction, convection and radiation. When the pot is put on fire, we would notice that the pot would heat up after some time and this is due to conduction.
After it has heat up, the water that is at the lower layer would rise up and replace the water that is at the lower layer of the pot. This is heat transfer by convection.
Some one that stands some distance from the fire place would soon begin to feel heat and this would occur by radiation.
Learn more about heat transfer:https://brainly.com/question/13433948
#SPJ1
How can I convert R-2-bromopentane to a Fisher projection?
The simplest way to convert R-2-bromopentane to a Fisher projection is to draw a Newman projection of the molecule, then convert the Newman projection to a Fischer projection.
To draw a Newman projection, start with a pentane structure and place a bromine atom on the second (R) carbon. The Newman projection should look like a cross with four carbon atoms and a bromine atom in the center. The bromine atom should be facing away from the viewer.
To convert the Newman projection to a Fischer projection, rotate the cross 90 degrees counter-clockwise and draw a line connecting the two ends of the cross. This will produce a Fischer projection with four carbon atoms and a bromine atom at the center. The bromine atom should be facing down.
Learn more about Newman Projection:
https://brainly.com/question/5597731
#SPJ4
the chemical formula of the trace metal detection fluid used in this exercise is onc10h6oh. based on what you observed about the reaction on your skin, what is happening in this reaction at a chemical level? (additional research may be necessary to answer this question.)
The chemical formula of the trace metal detection fluid used in this exercise is onc10h6oh. Chemical reactions involve the breaking and forming of chemical bonds between atoms in this reaction at a chemical level.
Without more information, it is not possible to accurately determine what is happening in the chemical reaction between the trace metal detection fluid and your skin. The chemical formula C10H6OH suggests that the trace metal detection fluid is a compound containing 10 carbon atoms, 6 hydrogen atoms, and 1 oxygen atom, which could be any number of compounds. In order to accurately determine what is happening in the chemical reaction between the trace metal detection fluid and your skin, it would be necessary to have additional information about the chemical and physical properties of the trace metal detection fluid, as well as the specific observations you made about the reaction on your skin.
In general, chemical reactions involve the breaking and forming of chemical bonds between atoms, resulting in the formation of new compounds. When a chemical reaction occurs on your skin, it may involve the transfer of atoms or molecules between your skin and the chemical, or it may involve the formation of new compounds on the surface of your skin. To determine what is happening in the chemical reaction between the trace metal detection fluid and your skin, you would need to perform additional tests and analyses to identify the specific reactants and products involved in the reaction, and to understand the mechanisms and kinetics of the reaction.
To know more about Chemical reactions please refer: https://brainly.com/question/29762834
#SPJ4
draw a product of bromination of this alkene. clearly indicate stereochemistry at each chiral carbon by drawing a wedged bond, a dashed bond and two in‑plane bonds.
Answer:
The product of bromination is alkene. So the answer should be none.
Explanation:
During bromination, alkene is formed. Alkenes can react with pure liquid bromine and bromine that has been dispersed in a solvent like tetrachloromethane in the cold.
What is bromination?An illustration of such an electrophilic aromatic nucleophilic substitution is the bromination of benzene. In this reaction, an intermediate is produced when the electrophile (bromine) makes a sigma bond with the benzene ring.
The intermediate is then stripped of a proton to create a replacement benzene ring. During bromination, alkene is formed. Alkenes can react with pure liquid bromine and bromine that has been dispersed in a solvent like tetrachloromethane in the cold. When a substance undergoes bromination, bromine is added towards the compound as a result of the chemical process.
Therefore, during bromination, alkene is formed.
To know more about bromination, here:
https://brainly.com/question/1952132
#SPJ2
Write the electron configuration for the Te2 ion. Determine which noble gas has the same electron configuration as Te2 ion. 8. 9. Write the electron configuration for elemental sodium, Na. Also, write the electron configuration for sodium ion, Na*. What noble gas element has the same electron configuration as the Na* ion?
Te2 (Te2 ion) is formed when tellurium gains two electrons. As a result, Te2 condensed electron configuration is [Kr]. 4d105s25p6
The noble gas arrangement for TE. [Kr] 4d10 5s2 5p4
The electron configuration of a noble gas is identical to that of a tellurium ion. Xenon
The atomic number of the alkali metal sodium is 11. Therefore, the electrical arrangement will be 1s22s22p63s1.
The sodium ion Na+ is a positive ion. This indicates that it has lost one electron because of the configuration. 11Na+:1s22s22p6.
Thus, the Na+ ion contains 10 electrons, matching the number of electrons that the noble gas neon (Ne) has. As a result, neon (Ne) and the Na+ ion have the identical electron configuration.
What is electronic configuration?
The arrangement of electrons in atomic or molecular orbitals within an atom, molecule, or other physical structure is known as the electron configuration. For instance, the neon atom's electron configuration is 1s2 2s2 2p6, which means that 1, 2 and 6 electrons, respectively, are present in each of the 1s, 2s, and 2p subshells.
To learn more about Electron configuration visit:
https://brainly.com/question/29757010
#SPJ4
another sample of eggshell reacts completely with 4.0 ml of unknown concentration if the reaction produced 0.095 atm of gas. the concentration of hcl solution was at least
The concentration of HCl = 1 M
What is the concentration of solution?A solution's concentration is an indicator of how much solute has dissolved in a certain volume of solvent or solution. A concentrated solution has a high concentration of dissolved solute. When a dissolved solute is present in a solution, it is said to be diluted.
Given that,
unknown solution concentration = 4.0 ml
pressure of gas = 0.095 atm
It corresponds to 0.020 gm of CaCO₃.
Thus, moles of CaCO₃ = 0.20 gm /(100 g/mol)
= 0.002 moles
moles of HCl = (moles of CaCO₃ × 2)
= ( 0.002 moles × 2)
= 0.004 moles
So, molarity of HCl = moles / volume in L
= (0.004 moles × 1000)/4
= 1 M
Thus, concentration of HCl = 1 M
To know more about concentration refer to:
https://brainly.com/question/17206790
#SPJ1
identify the number of unique h1 nmr and c13 nmr signals for each compound. a. benzene benzene. a six carbon ring with three internal double bonds. how many h1 nmr signals are in a? 1 how ma
The number of unique H¹ NMR ( proton nuclear magnetic resonance) signals for each compound is it shows only one signal.
The benzene contains the 6 carbon atoms and the 6 hydrogen atoms. the benzene have six protons and all the six protons are the chemical equivalent. they have the same bonding and have the same chemical environment to the each other. they have the same resonance frequency in the H¹ NMR signal in the experiment . that's the reason that the benzene shows only one signal.
Thus, benzene show one signal for the unique H¹ NMR , proton nuclear magnetic resonance experiment.
To learn more about H¹ NMR here
https://brainly.com/question/29769211
#SPJ4
Write the Lewis structures of HNNH and H2NNH2. Predict which molecule has the greater N–N bond energy.
The Lewis structures for HNNH and H2NNH2 would be as follows:
HNNH:
H
|
N-N
|
H
H2NNH2:
H-N-N-H
|
H-N-N-H
|
The N-N bond in H2NNH2 will have a slightly higher bond energy than the N-N bond in HNNH.
To predict which molecule has the greater N–N bond energy, we need to consider the electronegativity of nitrogen. Nitrogen has an electronegativity of 3.0 on the Pauling scale, which is intermediate in strength between carbon (2.5) and oxygen (3.5). This means that the N-N bonds in both HNNH and H2NNH2 will be slightly polar, with the nitrogen atoms having a partial positive charge and the nitrogen atoms having a partial negative charge.
Based on this information, we can predict that the N-N bond in H2NNH2 will have a slightly higher bond energy than the N-N bond in HNNH. This is because the two hydrogen atoms bonded to the nitrogen atoms in H2NNH2 will help to balance the charge on the nitrogen atoms, making the bond slightly less polar and therefore slightly more stable. In contrast, the single hydrogen atom bonded to the nitrogen atoms in HNNH will not have as much of an effect on the charge distribution, so the N-N bond in HNNH will be slightly more polar and have a slightly lower bond energy.
Learn more about the lewis structure here, https://brainly.com/question/20300458
#SPJ4
what is the minimum number of atoms that could be contained in the unit cell of an element with a body-centered cubic lattice?
The smallest number of atoms that could fit inside the unit cell of an element with a body-centered cubic lattice is XM4.
M ion is present in between each edge and one in the center too
so,no.of atoms per unit cell,
((12)*(1/4))+1=4 atoms
{case 1 These are 12 total atoms that are stored between four unit cells and an atom at the center that is not stored with any other unit cell}
X is at the corner of the unit cell so, the no. of atoms per unit cell=
((8)*(1/8))=1
{case 2 These are a total of 8 corners having one atom at each that, is shared between 8 unit cells}
so, the empirical formula of the compound must be
XM₄
As no option is matching with the answer, there is an error in the option also formula X2M is repeated 2 times may be an error
Learn more about unit cell here:
https://brainly.com/question/29537966
#SPJ4
What type of electrolyte is this solute? MgCl2(s) Mg2t(aq) 2C1" (aq) strong electrolyte weak electrolyte nonelectrolyte insoluble
The electrolyte is this solute MgCl2(s) Mg2t(aq) 2C1" (aq) strong electrolyte as it possess the strongest electrons.
Magnesium chloride bureaucracy a cation with +2 fee and an anion with -1 fee, so it's miles a 2-1 kind electrolyte.Strong electrolytes consist of all robust acids, robust bases and salts. In order to be a robust electrolyte, the substance in query ought to be an ionic compound and ought to additionally be capable of dissociate absolutely into its constituent ions whilst in solution.
Magnesium chloride is an ionic compound, ironic compound and it is a completely robust electrolyte mechanism, chloride bureaucracy. So it's left to mild kind Electoral Light. So the right solution is that it is a robust electrolyte.
Read more about solute;
https://brainly.com/question/16083884
#SPJ4
Draw lewis structure for C5H12
Lewis structure of C5H12 which is also called as pentane ( have five carbon and 12 hydrogen )
H--C--C--C--C--C--H
To draw the Lewis structure for C5H12, we need to determine the number of valence electrons in the molecule. Carbon has 4 valence electrons and hydrogen has 1, so C5H12 has a total of (5×4)+ 12 = 32 valence electrons.We can represent the carbon atoms as dots, with each dot representing one valence electron. Since there are five carbon atoms, we would need to draw five dots in a straight line to represent the carbon atoms. Each carbon atom is then bonded to two hydrogen atoms, so we can add two more dots for each carbon atom to represent the hydrogen atoms. This gives us a total of 5 x 2 = 10 dots for the hydrogen atoms.
To know more about electron-
https://brainly.com/question/12001116
#SPJ4
Identify indicators of a chemical reaction. check all of the boxes that apply. a black powder is added to a clear liquid. fizzing and bubbling occur, and the test tube becomes hot to the touch. formation of a gas emission of light emission of heat
On top of a clear liquid, a black powder is put. The test tube starts to fizz and bubble, and it also gets hot to the touch. A gas is formed, and then there is a color change from the light and heat it emission.
Light may be absorbed and emitted by atoms and molecules, which allows us to determine the number of energy levels an electron has as well as the distance between those levels. The photon energies that correspond to various colors of light vary. In essence, a photon is a bundle of light. A photon of red light would have less energy than a photon of blue light, for instance. Red and blue have different wavelengths, and since red has a longer wavelength than blue, it has a lower energy. Only in shells, which surround nuclei, do electrons actually exist. Shells are matched to specific energy levels. The process of emission is the release of various colour photons by elements as their atoms decelerate to lower energies. When heated or stimulated, atoms release light.
Learn more about emission here:
https://brainly.com/question/517329
#SPJ4
Answer:
1 and 2
Explanation:
the gas formation is causing the heat emission because when it heats up the molecules expand or smth and its causing the gas to form
What is the correct chemical formula for hexachlorostannate (IV) ion?
The correct chemical formula for hexachlorostannate (IV) ion is SnCl6^2-.
The hexachlorostannate (IV) ion is an inorganic compound that consists of a central tin (Sn) atom surrounded by six chlorine (Cl) atoms. The charge on the ion is 2-, which indicates that there are two extra electrons present. The (IV) in the name refers to the oxidation state of the tin atom, which is +4. The chemical formula for hexachlorostannate (IV) ion is therefore SnCl6^2-.
What is MOST likely the reason the author included information about what matter does in different temperatures?
Answer:to show you there different reactions
Explanation:
Why is Cl^− a Lewis base?
Cl− is a Lewis base because it donates a nonbonding electron pair.
What is a Lewis base?So any species with a filled orbital containing an electron pair that is not involved in bonding but has the potential to establish a dative bond with a Lewis acid to produce a Lewis adduct is considered a Lewis base. Because it can transfer its single pair of electrons, NH3 is a Lewis base. Trimethylborane (Me3B), which may receive a lone pair, is a Lewis acid. A dative bond is created in a Lewis adduct when the Lewis base and acid share an electron pair. A lone pair from NH3 will establish a dative bond with the vacant orbital of Me3B during a specific chemical reaction involving NH3 and Me3B to create the adduct NH3•BMe3.
Cl− is a Lewis base because it donates a nonbonding electron pair.
To refer more about Lewis base visit:
https://brainly.com/question/3655338
#SPJ4
The quantum number defines the shape of an orbital. spin magnetic principal angular momentum psi The subshell contains only one orbital. 5d 6f 4s 3d 1p The angular momentum quantum number is 3 in orbitals. s p d f a The principal quantum number of the first d subshell is 1 2 3 4 0 [Ar]4s^23d^104p^3 is the electron configuration of a(n) atom. As V P Sb Sn
The primary quantum number (n), the orbital angular momentum quantum number (l), the magnetic quantum number (ml), and the electron spin quantum number are the four quantum numbers that make up an atom (ms).
There can be no zero for the main quantum number (n). Therefore, the permitted values for n are 1, 2, 3, 4, and so forth. Any integer between 0 and n – 1 can serve as the angular quantum number (l). For instance, if n = 3, l can be one of 0, 1, or 2. Any integer between -l and +l can be used as the magnetic quantum number (m). The principal quantum number is the first quantum number (n). The energy of an electron is substantially determined by the fundamental quantum number.
To know more about the quantum number,
https://brainly.com/question/2292596
#SPJ4
what tests should be performed on a colorless crystalline compound to determine if it is a hydrate ? describe the results that would be confirmation of the compound of being a hydrate
Sometimes hydration reaction in compounds that have color. If you heat them, the color changes. It the hydrate is colorless, you can still determine if it is a hydrate by heating it.
What is hydration reaction?
Hydration in water is one of the reactants that are converted to products. One of the most common hydration reactions is the hydration of alkenes to produce alcohols. For example, industrial ethanol is made by hydrating ethane.
Therefore, Sometimes hydration reaction in compounds that have color. If you heat them, the color changes. It the hydrate is colorless, you can still determine if it is a hydrate by heating it.
To learn more about hydration reaction refer the given link:-
https://brainly.com/question/15724859
#SPJ4
explain the difference between hybrid atomic orbitals in valence bond theory and lcao molecular orbitals in mo theory.
In valence bond theory, a hybrid orbital is a weighted linear sum of the valence orbitals of a particular atom, and the hybrid orbital remains localized to that atom. In molecular orbital theory, a molecular orbital is a weighted linear sum of the valence atomic orbitals of all atoms in a molecule, and many of the molecular orbitals are delocalized throughout the molecule.
A molecule is a group of two or more atoms held together by attractive forces known as chemical bonds. Depending on the context, the term may or may not include ions that meet this criterion.In quantum physics, organic chemistry and biochemistry, ions The distinction between is removed and molecule is often used when referring to polyatomic ions.
Molecules can be isonuclear. H. Consists of atoms of chemical elements. Two atoms in the oxygen molecule (O2). Or it may be heteronuclear, which is a compound composed of multiple elements. Water (2 hydrogen atoms and 1 oxygen atom; H2O). In gas dynamics theory, the term molecule is often used for gas particles, regardless of their composition. This relaxes the requirement that molecules contain more than one atom, since noble gases are single atoms.
Learn more about molecules here : https://brainly.com/question/475709
#SPJ4
assign an iupac name for the following compound
The IUPAC name for the given compound is 4-formyl-2-oxocyclohexane-1-carboxylic acid. (Option B)
In chemical nomenclature, the IUPAC name or the nomenclature of organic chemistry refers to a method of naming organic chemical compounds based on the recommendation of the International Union of Pure and Applied Chemistry. It is published in the Nomenclature of Organic Chemistry. IUPAC name is the naming of a molecule's longest chain of carbons which are connected by single bonds (whether in a continuous chain or in a ring). All deviations, either multiple bonds or atoms other than carbon and hydrogen, are indicated by prefixes or suffixes according to a specific set of priorities. The IUPAC name for the given compound is 4-formyl-2-oxocyclohexane-1-carboxylic acid as the acyclic ring is directly attached to the carbon containing the functional group, the carbon atom of the functional group is not included in the parent name of the alicyclic ring.
Note: The question is incomplete as it is missing options which are A) 2, 4-dioxocyclohexane- 1-carboxylic acid B) 4-formyl-2-oxocyclohexane-1-carboxylic acid C) 2,4-dioxocyclohexanoic acid D) 2-oxo cyclohexane-1,4-dicarboxylic acid.
Learn more about IUPAC name:
https://brainly.com/question/28872356
#SPJ4
isopentyl acetate ir spectrum
What is the IR spectrum of isopentyl acetate?
The IR spectrum has a wavelength between 4000 and 600 cm-1. The numerous peaks on the spectra can be used to identify the molecule. This lab's goal was to esterify acetic acid with isopentyl alcohol to produce isopentyl acetate.
What color is isopentyl acetate?
It is a white liquid that is very soluble in most organic solvents but just marginally soluble in water.
What functional groups are in isopentyl acetate?
Carboxylic Acid Esters are a family to which isopentyl acetate belongs. These are derivatives of carboxylic acids in which an oxygen atom connects the carbon atom from the carbonyl group to an alkyl or aryl moiety (forming an ester group).
To know more about isopentyl acetate visit
https://brainly.com/question/15452269
#SPJ4
Below are two incorrect IUPAC names What are the correct IUPAC names? 2-methyl-3-propylpentane Correct name: ~ethyl-2-methylhexane 3-(1,1-dimethylethyl)pentane Correct name:
2-methyl-3-propylpentane Correct name: ~ethyl-2-methylhexane 3-(1,1-dimethylethyl)pentane
for 2-methyl-3-propylpentane-
2-methyl-3-propylpentane is incorrect name because in naming longest chain is considered of 5C.But actual longest chain is of 6C which is shown below.
so correct name is 3-isopropylhexane.
For 3-(1,1-dimethylethyl)-pentane-
This name is incorrect because numbering in longest chain is in such a way that side groups come at lower number, but here this is not happening.
Learn more about 2-methyl-3-propylpentane here:
https://brainly.com/question/12484834
#SPJ4
how many moles of chlorine gas contain the same number of atomss as there are in 16g of helium??????????????
The number of moles of chlorine gas that contain the same number of atoms as there are in 16 g of helium is 35.44 moles.
The number of moles of a substance can be calculated using the formula: n = m/M, where n is the number of moles, m is the mass of the substance, and M is the molar mass of the substance.
In this case, we are trying to find the number of moles of chlorine gas that contain the same number of atoms as there are in 16 g of helium. The molar mass of helium is 4 g/mol, so the number of moles of helium is 16 g / 4 g/mol = 4 moles.
Since the atomic weight of chlorine is 35.45 g/mol and the atomic weight of helium is 4 g/mol, it follows that there are 35.45 g/4 g = 8.86 atoms of chlorine in 1 mole of chlorine gas.
Therefore, the number of moles of chlorine gas that contain the same number of atoms as there are in 16 g of helium is 4 moles * 8.86 atoms/mole = 35.44 moles.
the inventory of phonemes used in spanish is nearly identical to that used in english. t or f
The given statement, "The inventory of phonemes used in Spanish is nearly identical to that used in English" is true.
The number of phonemes and letters that is used to represent them can vary between languages and dialects, therefore these numbers are not fixed numbers. A phoneme is defined as the smallest unit of speech in linguistics that distinguishes one word (or word element) from another.
For example, the letter p is used to distinguish the word "tap" from terms like "tab," "tag," and "tan." Based on the spoken language, the symbols of the International Phonetic Alphabet are used to represent phonemes. While some linguists are used to extend the definition of "phoneme" beyond vowels and consonants to include phonologically significant variations in pitch, stress, and rhythm, most linguists stick to this restriction.
Learn more about Phonemes from the link given below.
https://brainly.com/question/29832656
#SPJ4
Acetylsalicylic acid, better known as aspirin, has the Lewis structure (a) What are the approximate values of the bond angles labeled 1, 2, and 3? (b) What hybrid orbitals are used about the central atom of each of these angles? (c) How many σ bonds are in the molecule?
a) Approximate values of the bond angles labeled is 2
b) 120 degree sp2 hybridized carbon, 109.5 degree sp3 hybridized oxygen c) total 21 sigma bonds.
Sigma bonds are the strongest kind of covalent chemical bonding in chemistry. They are made when atomic orbitals directly overlap one another, according to. Using symmetry group terminology and tools, sigma bonding is most easily explained for diatomic molecules. According to this formal method, rotation about the bond axis is symmetrical for a -bond. S+s, pz+pz, s+pz, and dz2+dz2 are examples of common sigma bonds according to this description (where z is defined as the axis of the bond or the internuclear axis). Molecular orbitals (MO) with the same symmetry are also predicted to mix or hybridize according to quantum theory. The wavefunctions of the molecular orbitals s+s and pz+pz merge as a practical result of this mixing of diatomic molecules.
Learn more about sigma bonds here:
https://brainly.com/question/13818226
#SPJ4
supersaturated solution can be made to precipitate out by: A) Adding more solute B) Agitating the solution C Both (A) and (B) D) None of the above'
Both adding more solute and agitating the solution can cause a supersaturated solution to precipitate out. Therefore, the answer to the question is both (A) and (B).
A supersaturated solution is one in which more solute is dissolved in the solvent than is normally possible at a given temperature. This is done by either increasing the temperature of the solvent or by decreasing the pressure on the solvent. Supersaturation can occur in both solid and liquid solutions.
Supersaturated solutions can be made to precipitate out by either adding more solute to the solution or by agitating the solution. By adding more solute, the solute molecules will increase in concentration and the solution will become supersaturated. This will cause the molecules to become unstable, resulting in a precipitation reaction.
Agitating the solution can also cause a supersaturated solution to precipitate out. When the solution is agitated, the molecules become unstable and will start to form clusters. As these clusters grow, the molecules of the solute will begin to separate from the solvent, leading to a precipitation reaction.
Learn more about precipitation reaction at :https://brainly.com/question/29762381
#SPJ4
Why do scientists, sports, and medical professionals care about VO2?
Which of the following statements concerning aldehydes and ketones is correct?
O No cyclic ketones exist.
O No cyclic aldehydes exist.
O Both cyclic aldehydes and cyclic ketones exist.
O Neither cyclic aldehydes nor cyclic ketones exist.
O There are no cyclic aldehydes or ketones.
What are the similarities between aldehydes and ketones?Its presence of the a carbonyl group, a dual bond connecting carbon and oxygen, distinguishes aldehydes from ketones.
Which one of the following statements about ketone and aldehyde's distinctions is true*?A aldehyde as well as a ketone differ fundamentally from each other despite having the same central carbon atom due to their distinct chemical structures.Aldehydes combine to an alkyl solely on a single side and a hydrogen ion on the other, in contrast with ketones, which are distinguished by having double alkyl connections on both sides.
To know more about aldehydes and ketones visit:
https://brainly.com/question/15859478
#SPJ4
