The type 1 and type 2 service levels achieved with the current inventory policy can be calculated based on the inventory model parameters and the demand distribution.
The type 1 service level represents the probability of not having a stockout during the lead time. In this case, the lead time is one month, which is equivalent to 12 cans per year. The type 1 service level can be calculated using the z-value corresponding to the desired service level from the standard normal distribution. Assuming a desired service level of 95%, the z-value is approximately 1.645. The type 1 service level is then calculated as:
Type 1 service level = 1 - (Probability of demand exceeding R + L),
where L is the lead time demand.
The lead time demand can be calculated by multiplying the average demand per month (840/12) by the lead time (1 month), resulting in L = 70 cans.
Using the z-value and the lead time demand, the type 1 service level can be calculated.
The type 2 service level represents the probability of not having a stockout during the entire replenishment cycle, which includes both the lead time and the review period (time between inventory reviews). In the (R, Q) inventory model, the review period is not specified. Therefore, without the review period information, it is not possible to calculate the type 2 service level accurately.
In summary, the type 1 service level can be calculated based on the given information, but the type 2 service level cannot be determined without additional information about the review period in the inventory model.
Learn more about current inventory policy
https://brainly.com/question/28285610
#SPJ11
If Americans demand more European goods and services this will O decrease the demand for euros causing the euro to appreciate. increase the supply of euros causing the euro to depreciate. O increase the demand for dollars causing the euro to depreciate.. increase the demand for euros causing the euro to appreciate.
If Americans demand more European goods and services, this will increase the demand for euros, causing the euro to appreciate.
When Americans demand more European goods and services, they need to acquire euros to make payments for those imports. This increased demand for euros creates upward pressure on the value of the euro in the foreign exchange market, leading to an appreciation of the euro relative to the U.S. dollar.
The relationship between the demand for a currency and its exchange rate is inversely related. An increase in demand for euros indicates a higher willingness of Americans to hold euros, resulting in an appreciation of the euro. As the euro appreciates, it becomes more expensive relative to the U.S. dollar, making European goods and services relatively more expensive for American consumers. This, in turn, may potentially lead to a decrease in the quantity demanded of European goods and services by Americans, as they become relatively more expensive compared to domestically produced goods or goods from other countries.
Learn more about demand for euros
https://brainly.com/question/31452022
#SPJ11
1.
2.
3.
4. A borrower takes out a 30-year mortgage loan (with monthly
payments)for $400,000 with an interest rate of 6%The lender
requires 4.0 points to be paid at the time the loan is originated.
Please match the loan balance at maturity with the associated type of constant payment mortgage. Fully amortizing [Choose ] Partially amortizing [Choose ] Interest only [Choose ] Negative amortizing �
The loan balance at maturity for a borrower who takes out a 30-year mortgage loan for $400,000 with an interest rate of 6% and pays 4.0 points at loan origination would be associated with a fully amortizing constant payment mortgage.
In a fully amortizing mortgage, the borrower makes regular monthly payments that include both principal and interest, gradually paying down the loan balance over the loan term until it is fully paid off.
A fully amortizing mortgage is designed to ensure that the loan balance is fully repaid by the end of the loan term. In this case, the borrower takes out a 30-year mortgage, which means they have 30 years to repay the loan. The monthly payments are calculated to be consistent over the entire loan term, with each payment comprising a portion that goes towards paying off the principal amount borrowed and another portion that covers the interest charges. As the borrower continues to make these monthly payments, the loan balance gradually decreases until it reaches zero at the end of the 30-year period. This type of mortgage structure is commonly used for long-term financing of homes and properties.
To learn more about mortgage click here:
brainly.com/question/31751568
#SPJ11
applying the lower of cost or net realizable value rule to individual inventory items, at what amount should the company report its inventory? $3,213
When applying the lower of cost or net realizable value rule to individual inventory items, the company should report its inventory at the lower of cost or net realizable value (NRV). This means that if the cost of an individual item of inventory is greater than its NRV, the company should report it at the lower NRV rather than cost.
Thus, if the cost of an individual inventory item is $3,213 and its NRV is less than $3,213, the company should report it at the lower NRV. However, if the NRV is greater than the cost of the individual inventory item, the company should report it at its cost.
Therefore, the company should report its inventory at $3,213 only if the NRV is less than or equal to $3,213. If the NRV is greater than $3,213, the company should report the inventory at its cost.
To know more about NRV visit -
brainly.com/question/15365791
#SPJ11
The incremental cost of borrowing may also be referred to as the marginal cost of borrowing. (True or False)
2. Which of the following is a form of owner financing?
a. Land contract
b. Jumbo mortgage
c. Primary mortgage
d. Package mortgage
3. You borrowed $385,000 with a 30- year,fully amortized mortgage ten years ago.The rate on the loan is 3.625%and you have made 120 payments on the loan.A mortgage broker has identified a lender that will refinance your existing loan with a new 20-year mortgage with a rate of 2.75%. The upfront refinancing costs consist of 1.85 points.What is NPV of the refinancing if you believe that you will repay the loan over its full term?
4. I just borrowed $267,000 at 2.125%for 15-years.My lender is looking to sell my loan and the market rate of interest is 1.53%.What is the market value of my loan assuming that it is repaid with a lump sum after 72 regular payments?
5. You are looking to purchase a house for $500,000 with either a 70%or 80%LTV loan (both 30-year mortgages). The 70%LTV loan has a rate of 2.75%with 1 point due at closing and the 80%LTV loan has a rate of 2.875%with 1.25 points due at closing.What the marginal borrowing cost of the 80%LTV loan in relation to the 70%LTV loan if you plan to pay off the loan after 48 months?
Please input your answer such that 14.54%would be 14.54
True. The incremental cost of borrowing refers to the additional cost incurred when taking on additional debt or borrowing more funds. It is also commonly referred to as the marginal cost of borrowing.
a. Land contract. A land contract is a form of owner financing where the seller of a property provides financing to the buyer. The buyer makes payments directly to the seller, typically in installments, until the full purchase price is paid.
To calculate the NPV (Net Present Value) of the refinancing, we need additional information such as the remaining loan balance, the term of the new mortgage, and the discount rate. Without this information, we cannot determine the NPV.
To calculate the market value of the loan, we need to consider the difference between the market interest rate and the interest rate on the loan. With the given information, we can calculate the market value of the loan using the present value formula, but the number of payments (72) is not sufficient to determine the market value. Additional information is needed.
To determine the marginal borrowing cost of the 80% LTV loan compared to the 70% LTV loan, we need to compare the total cost of each loan, including the interest rate and points due at closing. However, without knowing the specific loan amounts and repayment terms, it is not possible to calculate the marginal borrowing cost.
Learn more about cost from
https://brainly.com/question/29509552
#SPJ11
You have been hired as a Cost Accountant by Sundial, Inc., which produces sunglasses. Your duties include developing cost standards for materials and labor, designing and implementing cost accounting systems, defining various product and operational costs, analyzing production costs and recommending changes. When the trial period is over, you will have a performance review to demonstrate the completed tasks and gained knowledge. You have read the Cost of Quality Report of Sundial, Inc. and discovered that quality costs constitute 4.2% of sales. The amount is enormous, and your boss asks you to develop a set of measures to reduce it. Sundial, Inc. Cost of Quality Report For the Year Cost of Quality Percent of Sales ($32,000,000) Prevention costs $160,000 0.5% Appraisal costs $192,000 0.6% Internal failure costs $576,000 2.8% External failure costs $416,000 1.3% Total cost of quality $1,344,000 4.2% Answer the three questions below: How would you define the Cost of Quality? Identify the types of quality costs. Provide at least three examples of each of the types of Quality Costs that Sundial, Inc. might have encountered. Develop a set of measures that Sundial, Inc. has to undertake in order to reduce the cost of quality. Provide at least five measures and explain in your own words how their implementation would impact the costs of quality and Sundial’s performance.
By proactively addressing quality issues, the company can reduce the need for rework and repair, minimize scrap and waste, enhance customer satisfaction and loyalty, and improve its reputation in the market.
The Cost of Quality refers to the total expenses incurred by a company in relation to achieving and maintaining product or service quality. It encompasses both the costs associated with preventing quality issues and the costs incurred due to failures in meeting quality standards. The goal is to minimize these costs while ensuring the highest level of quality.
There are four types of quality costs:
Prevention Costs: These are expenses incurred to prevent quality problems from occurring in the first place.
Examples for Sundial, Inc. may include investing in quality training programs for employees to enhance their skills and knowledge, implementing quality control procedures to ensure adherence to specifications, and conducting regular maintenance on machinery to avoid breakdowns.
Appraisal Costs: These are costs incurred to evaluate and measure the level of product or service quality. Sundial, Inc. may incur appraisal costs through activities such as product inspections to ensure conformity to standards, conducting quality tests and analyses, and performing supplier audits to assess the quality of raw materials.
Internal Failure Costs: These are costs associated with identifying and correcting quality issues before products reach customers. Examples include the costs of rework or repair, scrapped materials, machine downtime, and process redesign.
For Sundial, Inc., internal failure costs could arise from the need to rework defective sunglasses, the disposal of faulty components, equipment breakdowns that disrupt production, and the time and resources required to improve manufacturing processes.
External Failure Costs: These are costs incurred when quality problems are detected by customers after they have received the products. They include warranty claims, product returns, customer complaints, and potential damage to the company's reputation.
Sundial, Inc. may face external failure costs due to customer returns and refunds, warranty repairs and replacements, customer support expenses, and the potential loss of future sales opportunities.
To reduce the cost of quality, Sundial, Inc. can undertake the following measures:
Invest in quality improvement initiatives, such as Lean Six Sigma, to streamline processes, reduce defects, and increase overall efficiency. By eliminating waste and optimizing operations, the company can minimize internal failure costs and enhance customer satisfaction.
Implement a robust supplier quality management program to ensure that incoming materials and components meet stringent quality standards. By working closely with suppliers and conducting regular audits, Sundial, Inc. can prevent quality issues caused by subpar inputs.
Enhance employee training and empowerment by providing ongoing education and fostering a culture of quality. Engaged and knowledgeable employees are more likely to identify and address quality issues proactively, reducing both internal and external failure costs.
Implement a comprehensive quality control system that includes real-time monitoring and inspection of the production process. By detecting and resolving quality issues in real-time, the company can minimize the number of defective products and associated costs.
Foster strong relationships with customers by actively seeking feedback and addressing their concerns promptly. By understanding customer expectations and aligning products with their needs, Sundial, Inc. can reduce external failure costs through fewer returns, complaints, and warranty claims.
For more such question on quality. visit :
https://brainly.com/question/28711262
#SPJ8
Answers need to present in the point form, include 100 to 200 words for each question.
Evaluate the current communications mix for an online e-tailer and make recommendations for future communications to achieve customer acquisition and retention.
Evaluation of the current communication mix for an online e-tailer includes an assessment of the tactics used to attract and retain customers. The communication mix of an e-tailer encompasses advertising, public relations, personal selling, sales promotion, and direct marketing. E-tailers rely on these tactics to develop and communicate a clear message to the target audience.
The current communication mix of an e-tailer includes the following:
Advertising:
Social media, search engine marketing (SEM), pay-per-click (PPC), and display advertising. Social media advertising involves advertising on popular social media sites. Search engine marketing is a form of online advertising that involves placing ads on search engine result pages (SERPs). Pay-per-click is an advertising model in which advertisers pay each time a user clicks on one of their ads. Display advertising involves the use of banner ads on websites.
Public relations: PR involves managing the flow of information between an organization and its target audience. E-tailers use public relations to create a positive image and reputation for their brand.
Personal selling: Personal selling involves face-to-face interaction with customers. E-tailers use personal selling in the form of live chat or customer support calls.
Sales promotion: E-tailers use sales promotions to drive sales. Common sales promotions include discounts, coupon codes, and free shipping.
Direct marketing: Direct marketing involves the delivery of promotional material directly to the target audience. E-tailers use direct marketing tactics such as email marketing to communicate with customers and promote their products.
Recommendations for future communications to achieve customer acquisition and retention for an online e-tailer include the following:
Tactic 1: Customer Segmentation
To effectively target customers, e-tailers need to segment their customers based on demographics, location, purchase history, and behavior. This will allow the e-tailer to tailor their communications to each customer group.
Tactic 2: Personalization
Personalization involves tailoring messages and promotions to individual customers. Personalization can be achieved through email marketing and the use of artificial intelligence to analyze customer data.
Tactic 3: Social Media Influencer Marketing
E-tailers can collaborate with social media influencers to promote their products. Social media influencers have a large following and can reach a vast audience, making them an effective marketing tool.
Tactic 4: User-Generated Content
E-tailers can encourage customers to share their experiences and reviews of their products. User-generated content can be shared on social media and the e-tailer's website.
Tactic 5: Gamification
Gamification involves adding game elements to the e-tailer's website or app to engage customers and drive sales. Gamification can include leaderboards, badges, and rewards.
Tactic 6: Live Chat
E-tailers can offer live chat support to customers to answer their questions and provide support. Live chat support can help build trust and loyalty with customers.
Tactic 7: SMS Marketing
E-tailers can use SMS marketing to communicate with customers about promotions, discounts, and new products. SMS marketing has a high open rate and can be an effective way to reach customers.
In conclusion, e-tailers need to assess their current communication mix and develop a strategy to achieve customer acquisition and retention. Customer segmentation, personalization, social media influencer marketing, user-generated content, gamification, live chat, and SMS marketing are all tactics that e-tailers can use to effectively communicate with their target audience.
Learn more about search engine marketing (SEM): https://brainly.com/question/31715598
#SPJ11
the traditional economic order quantity formula does
not reflect quantity discounts
1) T
2) F
The statement "the traditional economic order quantity - EOQ formula does not reflect quantity discounts" is true.
The traditional Economic Order Quantity (EOQ) formula does not take into account quantity discounts. The EOQ formula is based on the assumption that there are no discounts available for ordering larger quantities.
It is derived from the trade-off between ordering costs and holding costs.
The EOQ formula is given as:
EOQ = sqrt((2 * D * S) / H)
Where:
D = Annual demand (number of units)
S = Cost per order (ordering cost)
H = Holding cost per unit per year
This formula helps in determining the optimal order quantity that minimizes the total cost of inventory management. However, it does not consider the possibility of quantity discounts, which are price reductions offered when larger quantities are ordered.
In conclusion, it is true that the traditional EOQ formula does not reflect quantity discounts. If quantity discounts are available, a modified approach or different models, such as the EOQ with quantity discounts or the price-break model, should be used to consider the impact of discounts on the optimal order quantity and total cost.
To learn more about EOQ, visit
https://brainly.com/question/26814787
#SPJ11
Question 12 (3 points) Which of the following is not true with regards to deferred revenue? O a) Deferred revenue is a liability on the balance et representing future services expected to be performed. b) The adjusting entry results in a debit to a liability account and a credit to a revenue account. c) Without an adjusting entry, liabilities will be overstated, and stockholder's equity will be understated. d) Without an adjusting entry, revenues and net income will be overstated.
Correct Option is d) Without an adjusting entry, revenues and net income will be overstated. Deferred revenue refers to the income received in advance from a client for goods or services that have yet to be delivered, which is recorded as a liability.
The goods or services can either be products or services that the company has agreed to offer at a later date. The company must report the payment as deferred revenue when the payment is received until it is shipped or provided. The income would be reported as revenue and deferred revenue would be decreased by the same amount when the goods or services are delivered.
Deferring income is a method that can be used to reduce a company's tax liability. A company can defer income by putting off work until after the end of the tax year. The income earned will then be reported on the following year's tax return. In general, a deferred revenue account is kept as a liability account on the balance sheet because the seller owes a good or service to the purchaser. When the good or service is given, the revenue is transferred to the income statement. Without an adjusting entry, revenues and net income will be overstated as they will be recorded as received even though the company has not yet provided the goods or services.
To know more about Deferred revenue visit-
brainly.com/question/28391470
#SPJ11
Antigua Air flies only one route: Miami to the V.C. Bird International Airport on the island of
Antigua, Due to current travel restrictions, AA is the only airline delivering and returning
passengers to the island. The demand for each flight is Q= 1,000 -2P. Q is the number of
passengers flying AA weekly and P is the price of a one-way ticket in either direction. AA's
weekly costs of running each flight is $75,000 (terminal fees, aircraft docking fees, etc.) plus
$100 per passenger per flight.
A) What is the profit-maximizing price that AA will charge? How many people will in fly each
week? What is AA's profit per week?
B)
AA learns that the fixed costs per week are in fact $82,000 instead of $75,000 as the result of an increase in terminal fees at both the Miami and V.C. Bird airports. How will AA react to the increase in fixed cost? Will the airline stay in business for long?
C)
Wait! AA determines that two different types of people fly to and from the island, Type A
consists of older more affluent travelers with a demand of Qa= 600 - P, Type B consists of
students whose total demand is Qb= 400 -P. Because the students are easy to identify by
checking for a student ID, AA decides to charge them a different discounted price, What price does AA charge the students? What price does it charge other custorners? How many of each type are on the flight each week?
D)
What would AA weekly profits be now? Would the airline now stay in business?
E)
Calculate the consumer surplus of each consumer group under price discrimination. What isthe total consumer surplus?
F)
Before AA started price discriminating, how much consumer surplus was the Type A demand getting from air travel to and from the island? What about Type B? Why did total consumer surplus decline with price discrimination, even though the total quantity of tickets sold remained unchanged?
A) AA's profit per week is $60,000. B) AA could explore cost-cutting measures to offset the increased fixed costs. C) AA charges the students a price of $200 (P = $200) and charges other customers a price of $400 (P = $400). D) Thus, the revenue gives a weekly profit of -$2,000. E) The total consumer surplus is $88,000. F) Type A consumers had a consumer surplus of $180,000, Type B consumers had a consumer surplus of $40,000.
The demand function is Q = 1,000 - 2P, and the cost function is $75,000 + $100Q. Substituting this price into the demand function, we find Q = 400. AA's profit per week can be calculated by subtracting the total cost from the total revenue: Profit = (400 × $300) - ($75,000 + $100 × 400) = $60,000.
B) With the increase in fixed costs to $82,000, AA may need to adjust its pricing strategy. It could increase the ticket prices to cover the higher costs, which may affect demand. Alternatively, AA could explore cost-cutting measures to offset the increased fixed costs.
C) AA decides to charge the students a discounted price to attract their business. Given the demand functions Qa = 600 - P and Qb = 400 - P, AA charges the students a price of $200 (P = $200) and charges other customers a price of $400 (P = $400).
D) With price discrimination, AA's weekly profits would be calculated by subtracting the total cost from the total revenue. Revenue from Type A passengers would be ($400 × 200) = $80,000, and revenue from Type B passengers would be ($200 × 200) = $40,000. Thus, total revenue would be $120,000. Subtracting the total cost ($82,000 + $100 × (200 + 200)) = $122,000 from the revenue gives a weekly profit of -$2,000.
E) The consumer surplus for Type A passengers is $72,000, and for Type B passengers, it is $16,000. The total consumer surplus is $88,000.
F) Before price discrimination, Type A consumers had a consumer surplus of $180,000, while Type B consumers had a consumer surplus of $40,000. The total consumer surplus declined with price discrimination because although the total quantity of tickets sold remained the same, the prices charged to each group were different.
Learn more about consumer surplus here:
https://brainly.com/question/30622657
#SPJ11
3. a) What would your value proposition be if you were trying to create a new venture that sells vitamin-infused water in Bangladesh? Chart the competitive position for this business that you are planning. b) Define the minimum viable business product for a technology-based platform solution that lets university students in Bangladesh borrow from and lend to each other (peer-to-peer lending business model).
a) Value proposition for vitamin-infused water business in Bangladesh Value proposition is the unique value that a company or product offers to its customers. b) Minimum viable product for peer-to-peer lending business model in Bangladesh.
If we were to create a new venture that sells vitamin-infused water in Bangladesh, then the value proposition would be that the product is a healthy beverage option that provides vitamins and minerals to consumers in a convenient and affordable way. The target audience would be health-conscious individuals who are looking for a refreshing drink that is beneficial to their health. To make the product stand out, the business could offer a variety of flavors and use natural ingredients. The competitive position for this business would be moderately high, as there is currently a trend towards healthier lifestyles and there is a demand for functional beverages in the market. However, there may be other established brands that offer similar products, so the business would need to differentiate itself through branding, pricing, and distribution strategy. The minimum viable product (MVP) is the simplest version of a product that can be released to the market to test its viability. For a technology-based platform solution that lets university students in Bangladesh borrow from and lend to each other (peer-to-peer lending business model), the MVP could be a basic website or mobile application that allows students to create profiles, view loan requests and offers, and make transactions. The platform could incorporate a system for verifying user identities, credit scores, and academic standing. The MVP would need to have a secure payment gateway, feedback system, and user support. The platform could generate revenue through transaction fees or interest rates. The MVP would be tested in a small group of early adopters before scaling up to a larger audience. The success of the MVP would depend on the willingness of students to use the platform, the efficiency of the platform's operation, and the viability of the business model.
To know more about business visit:
brainly.com/question/15826771
#SPJ11
The Federal Reserve has a reserve requirement of 15%. During a recession the Federal Reserve decides to reduce the interest rate it pays on reserves, causing excess reserves holdings to fall by $3 billion Instructions. Enter your answer as a positive number rounded to two decimal places. As a result the money supply will decrease by $ billion
To calculate the decrease in the money supply resulting from a change in excess reserves, we need to consider the reserve requirement ratio and the money multiplier.
Reserve requirement ratio = 15%
Change in excess reserves = $3 billion
The money multiplier can be calculated using the formula:
Money Multiplier = 1 / Reserve Requirement Ratio
In this case, the money multiplier is:
Money Multiplier = 1 / 0.15 = 6.67
To calculate the change in the money supply, we multiply the change in excess reserves by the money multiplier:
Change in Money Supply = Change in Excess Reserves * Money Multiplier
Change in Money Supply = $3 billion * 6.67
Change in Money Supply = $20.01 billion
Therefore, the decrease in the money supply resulting from the reduction in excess reserves by $3 billion would be approximately $20.01 billion.
Learn more about multiplier here
https://brainly.com/question/31358202
#SPJ11
you have been appointed to project manager the building of a hospital in soweto where a number of people have recently died due to covid coronavirus the hospital is needed urgently due to the existing hospital having limited capacity to accommodate the thousand of coronavirus infected resident that are in gire need of hospital care or risk death the south african minister of health has a personal interest in this project and has determine astrict deadline for the completiond of the project the minister is an ex -resident of soweto and hence is passionate about helping the resident he has pledged to the residents that he will ensure that the hoispital is made operational in record time. as the appointed project manager have been mandate ti deliver on the project an and have been instructed that the project risks need to be managed in a prudent manner
Question 1 '
when considering the project ri9sk,project managers consider project risk principle in order to plan well for the risk that may occur .you have set up a meeting specifically to discuss the project risk .start the meeting by outlining the risk management principles to your team.
Question 2
the next aspect that you will highlight with your team are the topics addressed in project risk management .enlighten your team on each of these topics by discussing each one in detail so that they may understand the impact of each of them on project.
Question 3
for an upcoming project of your choice develop a procurement plan that will ensure the timeous available of required resource for successful task execution in order to meet the desired project outcomes be sure to include all processes and activities that enable the project manager to acquire the goods and suppliers required to perform the project scope of work as a project manager you need to ensure further that consideration is given to quality and timeframe requirements when planning the procument of required resources additionally ,highlight the input tools and throughout the procument management process.
Question 4
one of the most common approaches to identify the sources of risk is brainstorming the project manager shouls invovles key project team members in identifying potential sources of risk .now that your team is sitting with you ,use the brainstorming approach to map out the potential risks of your project
Question 5
Risk management planning should begin as early as possible when a project is conceived and should be complted early in the project(PMI 2017:401) the process should be continuosly engaged in throughout the project life cycle as new or unidentified risk emerge.present a graph to your team showing risk in the project lifecycle the graph should show the degree of the risk over project time the cost of project and risks ishould be plotted separately. provide an in depth discussion of the risk that you identified for your project .
The project manager has been appointed to build a hospital in Soweto due to the recent Covid-19 deaths that have occurred in the area. A new hospital is urgently needed to cater to the growing number of patients in need of hospitalization as the existing hospital has limited capacity.
The South African Minister of Health has a personal interest in the project, having grown up in Soweto, and is passionate about helping the residents. The project manager is mandated to deliver on the project and instructed to manage project risks in a prudent manner. The brainstorming approach is one of the most common ways to identify the sources of risk. Therefore, the project manager should involve key project team members in identifying potential sources of risk. A graph that shows the degree of the risk over project time and the cost of the project and risks should be plotted separately. Risk management planning should start as early as possible when the project is conceived and should be completed early in the project. The process should be continuously engaged in throughout the project life cycle as new or unidentified risk emerges. There are several risks associated with building the hospital in Soweto. These risks include funding risks, political risks, safety risks, and legal risks. Funding risks arise when there is a shortage of funds for the project. Political risks arise when the government changes its policies, causing delays in the project. Safety risks arise when there is a lack of safety measures, causing harm to workers or project delays. Legal risks arise when there are legal issues such as permits or contracts.
To know more about hospitalization visit:
https://brainly.com/question/29877027
#SPJ11
Scenario 29-1 The Monetary Policy of Jaune is controlled by the country's central bank known as the Bank of Jaune. The local unit of currency is the Jaunian dollar. Aggregate banking statistics show that collectively the banks of Jaune hold $220 million of required reserves, $55 million of excess reserves, have issued $5,500 million of deposits, and hold $440 million of Jaunian Treasury bonds. Jaunians prefer to use only demand deposits and so all money is on deposit at the bank. Refer to Scenario 29-1. Assuming the only other thing Jaunian banks have on their balance sheets is loans, what is the value of existing loans made by Jaunian banks? O $4,785 million O $5,225 million $5,435 million O $4,685 million
Based on the information provided in Scenario 29-1, we can calculate the value of existing loans made by Jaunian banks.
First, we need to determine the total reserves held by the banks. The scenario states that the banks of Jaune hold $220 million of required reserves and $55 million of excess reserves. Therefore, the total reserves held by the banks can be calculated as follows:
Total Reserves = Required Reserves + Excess Reserves
Total Reserves = $220 million + $55 million
Total Reserves = $275 million
Next, we need to calculate the total liabilities of the banks, which include deposits and Treasury bonds. The scenario states that the banks have issued $5,500 million of deposits and hold $440 million of Jaunian Treasury bonds. Therefore, the total liabilities can be calculated as follows:
Total Liabilities = Deposits + Treasury Bonds
Total Liabilities = $5,500 million + $440 million
Total Liabilities = $5,940 million
Now, to determine the value of existing loans, we subtract the total reserves from the total liabilities:
Existing Loans = Total Liabilities - Total Reserves
Existing Loans = $5,940 million - $275 million
Existing Loans = $5,665 million
Therefore, the value of existing loans made by Jaunian banks is $5,665 million.
To know more about loans visit-
brainly.com/question/14032868
#SPJ11
Read the case study in Chapter 5 (page 226) titled "Constraint Management at Southwest Airlines." Then discuss the following questions in your response:
Which boarding scenario among the different ones proposed would you recommend for implementation? Why?
How should Southwest evaluate the gate boarding and plane turnaround process?
How will Southwest know that the bottleneck had indeed been eliminated after the change in the boarding process?
Southwest should evaluate the gate boarding and plane turnaround process by following some methods such as:Conducting a detailed analysis of the current boarding and plane turnaround process, including determining the time required for each step and identifying areas of inefficiency or delay.
Benchmarking the performance of the boarding and plane turnaround process against competitors in the industry, as well as best practices from other industries.Experimenting with new boarding and plane turnaround processes in a controlled environment, such as a pilot program, to test the effectiveness and efficiency of proposed changes.Measuring key performance indicators (KPIs) such as on-time departures, passenger satisfaction ratings, and average boarding time to evaluate the success of the new process.After making changes in the boarding process, Southwest will know that the bottleneck has been eliminated by measuring KPIs such as on-time departures, average boarding time, and passenger satisfaction ratings. If the new boarding process improves these metrics, it indicates that the bottleneck has been eliminated. Additionally, monitoring the feedback from the ground staff and the passengers will also help to determine whether the bottleneck has been eliminated or not.
To know more about Benchmarking visit:
https://brainly.com/question/30977679
#SPJ11
On December 31, 2019, Tamarisk Corporation signed a 5-year, non-cancelable lease for a machine. The terms of the lease called for Tamarisk to make annual payments of $7,880 at the beginning of each year, starting December 31, 2019. The machine has an estimated useful life of 6 years and a $5,000 unguaranteed residual value. The machine reverts back to the lessor at the end of the lease term. Tamarisk uses the straight-line method of depreciation for all of its plant assets. Tamarisk’s incremental borrowing rate is 7%, and the lessor’s implicit rate is unknown.
Question: Compute the present value of the lease payments?
The machine has a useful life of 6 years and a $5,000 unguaranteed residual value. Tamarisk uses the straight-line method of depreciation. Their incremental borrowing rate is 7%, while the lessor's implicit rate is unknown.
To calculate the present value of the lease payments, we can use the formula for the present value of an annuity. The formula is: PV = Pmt × [(1 - (1 + r)^(-n)) / r], where PV is the present value, Pmt is the payment amount, r is the discount rate, and n is the number of periods.
In this case, the annual payment amount is $7,880, and there are 5 years remaining in the lease term. We need to find the discount rate to compute the present value. Since the lessor's implicit rate is unknown, we will use Tamarisk's incremental borrowing rate of 7% as the discount rate.
Using the formula, we can calculate the present value of the lease payments as follows:
PV = $7,880 × [(1 - (1 + 0.07)^(-5)) / 0.07]
Simplifying the equation gives:
PV = $7,880 × [(1 - 0.713)] / 0.07
PV = $7,880 × 0.287 / 0.07
PV = $32,876.57
Therefore, the present value of the lease payments is approximately $32,876.57. This represents the current value of the future lease payments discounted at Tamarisk's incremental borrowing rate of 7%.
To learn more about incremental click here brainly.com/question/28167612
#SPJ11
38
6
A call option has an exercise price of $78 and matures in 7 months. The current stock price is $83, and the risk-free rate is 4 percent per year, compounded continuously. What is the price of the call
To calculate the price of the call option, we can use the Black-Scholes option pricing model. The formula for the price of a European call option is:
C = S₀e^(-qt)N(d₁) - Xe^(-rt)N(d₂)
Where:
C = Price of the call option
S₀ = Current stock price
X = Exercise price of the option
r = Risk-free interest rate
t = Time to maturity (in years)
N = Cumulative standard normal distribution function
d₁ = (ln(S₀/X) + (r + σ²/2)t) / (σ√t)
d₂ = d₁ - σ√t
Given the following values:
S₀ = $83
X = $78
r = 0.04 (4% per year continuously compounded)
t = 7/12 (7 months, or 7/12 years)
To calculate d₁ and d₂, we need the volatility (σ) of the stock. Since it is not provided in the question, we cannot calculate the exact price of the call option without this information.
Volatility represents the stock's price fluctuations and is typically expressed as an annual percentage. Without it, we cannot proceed with the calculation. The volatility value can be estimated based on historical data or implied volatility from options market prices.
Once the volatility is known, we can plug in the values into the Black-Scholes formula to calculate the price of the call option.
learn more about Black-Scholes here
https://brainly.com/question/31514873
#SPJ11
what type of client is ideally suited for stage 2 training around vt1?
In stage 2 of training, it is ideal to train clients who are already quite fit and able to handle intense exercise. The target heart rate zone during this stage is VT1, which is around 80% of maximum heart rate.
Clients who have already been exercising regularly and have built up a good level of cardiovascular fitness are ideal candidates for stage 2 training around VT1.These clients will be able to handle longer periods of exercise at a high intensity, and will see the most benefits from this type of training. Stage 2 training around VT1 is focused on building endurance and improving cardiovascular fitness, so clients who are training for endurance sports such as running, cycling or triathlons will benefit greatly from this type of training.Other clients who may be suited to stage 2 training around VT1 include those who are training for a specific event or competition, such as a marathon, triathlon or ironman. These clients may need to build up their endurance levels in order to be successful in their event, and stage 2 training can help them achieve this.However, it is important to note that not all clients will be suited to stage 2 training around VT1. Clients who are new to exercise or who have not exercised regularly in the past may not be able to handle this level of intensity, and may be better suited to stage 1 training. Additionally, clients with certain medical conditions or injuries may not be able to safely participate in stage 2 training, and should be advised to seek medical clearance before beginning any exercise program.
To know more about clients visit:
https://brainly.com/question/29051195
#SPJ11
Exercise 13-3 (Algo) Make or Buy Decision (LO13-3] Troy Engines, Ltd., manufactures a variety of engines for use in heavy equipment. The company has always produced all of the necessary parts for its engines, including all of the carburetors. An outside supplier has offered to sell one type of carburetor to Troy Engines, Ltd., for a cost of $36 per unit. To evaluate this offer, Troy Engines, Ltd., has gathered the following information relating to its own cost of producing the carburetor internally: Direct materials Direct labor Variable manufacturing overhead Fixed manufacturing overhead, traceable Fixed manufacturing overhead, allocated Total cost 20,000 Units Per Per Unit Year $ 13 $ 260,000 11 220,000 4 80,000 6+ 120,000 9 180,000 $ 43 $ 860,000 *One-third supervisory salaries; two-thirds depreciation of special equipment (no resale value). Required: 1. Assuming the company has no alternative use for the facilities that are now being used to produce the carburetors, what would be the financial advantage (disadvantage) of buying 20,000 carburetors from the outside supplier? 2. Should the outside supplier's offer be accepted? 3. Suppo that if the carburetors were purchased, Troy Engines, Ltd., could use the freed capacity to launch a new product. The segment margin of the new product would be $200,000 per year. Given this new assumption, what would be the financial advantage (disadvantage) of buying 20,000 carburetors from the outside supplier? 4. Given the new assumption in requirement 3, should the outside supplier's offer be accepted? Complete this question by entering your answers in the tabs below. Required 1 Required 2 Required 3 Required 4 Assuming the company has no alternative use for the facilities that are now being used to produce the carburetors, what would be the financial advantage (disadvantage) of buying 20,000 carburetors from the outside supplier? Complete this question by entering your answers in the tabs below. Required 1 Required 2 Required 3 Required 4 Should the outside supplier's offer be accepted? Yes No Complete this question by entering your answers in the tabs below. Required 1 Required 2 Required 3 Required 4 Suppose that if the carburetors were purchased, Troy Engines, Ltd., could use the freed capacity to launch a new product. The segment margin of the new product would be $200,000 per year. Given this new assumption, what would be the financial advantage (disadvantage) of buying 20,000 carburetors from the outside supplier? Complete this question by entering your answers in the tabs below. Required 1 Required 2 Required 3 Required 4 Given the new assumption in requirement 3, should the outside supplier's offer be accepted? Yes No
It would be advantageous to accept the offer and purchase the carburetors from the outside supplier. Given the new assumption in requirement 3, the outside supplier's offer should be accepted because the financial advantage of buying 20,000 carburetors from the outside supplier is $160,000.
In order to calculate the financial advantage/disadvantage of buying 20,000 carburetors from the outside supplier, we will calculate the total cost of making carburetors: Direct materials = $13 per unit × 20,000 units = $260,000 Direct labor = $11 per unit × 20,000 units = $220,000 Variable overhead = $4 per unit × 20,000 units = $80,000 Traceable fixed overhead = $6+ per unit × 20,000 units = $120,000 Allocated fixed overhead = $9 per unit × 20,000 units = $180,000 Total cost = $860,000 Cost per unit = $860,000 ÷ 20,000 = $43 per unit The financial advantage/disadvantage of buying carburetors from the outside supplier is calculated by subtracting the selling price from the total cost per unit: Total cost per unit $43 Selling price per unit - $36 Advantage/disadvantage per unit $7 Advantage/disadvantage per 20,000 units $140,000 Therefore, if the company has no alternative use for the facilities that are now being used to produce the carburetors, buying 20,000 carburetors from the outside supplier will result in a financial disadvantage of $140,000.
Since buying carburetors from the outside supplier will result in a financial disadvantage of $140,000, the outside supplier's offer should not be accepted. If carburetors are purchased, Troy Engines, Ltd. can use the freed capacity to launch a new product that will yield a segment margin of $200,000 per year. The financial advantage/disadvantage of buying 20,000 carburetors from the outside supplier can be calculated as follows: Advantage/disadvantage per unit = Selling price per unit - Total variable cost per unit Selling price per unit = $36 Total variable cost per unit = Direct materials per unit + Direct labor per unit + Variable manufacturing overhead per unit Direct materials per unit = $13 Direct labor per unit = $11 Variable overhead per unit = $4 Total variable cost per unit = $13 + $11 + $4 = $28 Advantage/disadvantage per unit = $36 - $28 = $8 Advantage/disadvantage per 20,000 units = $8 × 20,000 = $160,000 Since the financial advantage of buying 20,000 carburetors from the outside supplier is $160,000,
To know more about purchase visit:-
https://brainly.com/question/32412874
#SPJ11
What is the legal effect of the term "As Is" or "As-Is Sale" in the CAR® RPA in
relieving the seller of obligations under the Transfer Disclosure Statement
(TDS)?
a. The seller need not complete the TDS.
b. The seller still must complete and deliver a TDS, but the seller will be
relieved of the duty to disclose most defects or damages to the buyer
(unless required to do so by law).
c. The seller still must complete and deliver a TDS, but the seller will be
relieved of obligations to repair defects or damages (unless required to do
so by law).
d. The seller still must complete and deliver a TDS, but the seller’s
broker/agent will be relieved of the duty to complete and deliver an
Agent’s Visual Inspection Disclosure (AVID) form to the buyer.
The legal effect of the term "As Is" or "As-Is Sale" in the CAR® RPA (California Residential Purchase Agreement) regarding the Transfer Disclosure Statement (TDS) is that the seller still must complete and deliver a TDS.
When a property is sold under an "As Is" or "As-Is Sale" condition, it means that the property is being sold in its current condition, without any warranties or guarantees from the seller. While the seller is still required to complete and deliver a TDS, which provides information about the property's condition and any known defects.
The seller is relieved of the obligation to repair those defects or damages, unless there are specific legal requirements stating otherwise. This relieves the seller of the responsibility to make repairs or address issues identified in the TDS, shifting the responsibility to the buyer to conduct their own inspections and assessments of the property's condition.
Learn more about legal effect here: brainly.com/question/1382563
#SPJ11
Esfandairi Enterprises is considering a new three-year expansion project that requires an initial fixed asset investment of $2.41 million. The fixed asset will be depreciated straight- line to zero over its three-year tax life, after which time it will be worthless. The project is estimated to generate $1,775,000 in annual sales, with costs of $685,000. The tax rate is 23 percent and the required return on the project is 10 percent. What is the project's NPV? (Do not round intermediate calculations. Enter your answer in dollars, not millions of dollars, and round your answer to 2 decimal places, e.g., 1,234,567.89.) NPV
The project's npv is -$4,000..to calculate the net present value (npv) of the project, we need to discount the cash flows generated by the project to their present value and subtract the initial investment.
here are the steps to calculate the npv:
1. calculate the annual cash flows generated by the project:
annual cash flow = sales - costs
annual cash flow = $1,775,000 - $685,000 = $1,090,000
2. calculate the depreciation expense for each year:
depreciation expense = initial investment / tax life
depreciation expense = $2,410,000 / 3 = $803,333.33 per year
3. calculate the taxable income for each year:
taxable income = annual cash flow - depreciation expense
taxable income = $1,090,000 - $803,333.33 = $286,666.67
4. calculate the annual tax payment:
tax payment = taxable income * tax rate
tax payment = $286,666.67 * 23% = $65,833.33
5. calculate the after-tax cash flows for each year:
after-tax cash flow = annual cash flow - tax payment
after-tax cash flow = $1,090,000 - $65,833.33 = $1,024,166.67
6. calculate the present value factor for each year using the required return:
present value factor = 1 / (1 + required return)^year
present value factor for year 1 = 1 / (1 + 10%)¹ = 0.9091
present value factor for year 2 = 1 / (1 + 10%)² = 0.8264
present value factor for year 3 = 1 / (1 + 10%)³ = 0.7513
7. calculate the present value of the after-tax cash flows for each year:
present value of year 1 cash flow = after-tax cash flow * present value factor for year 1
present value of year 2 cash flow = after-tax cash flow * present value factor for year 2
present value of year 3 cash flow = after-tax cash flow * present value factor for year 3
present value of year 1 cash flow = $1,024,166.67 * 0.9091 = $930,000
present value of year 2 cash flow = $1,024,166.67 * 0.8264 = $846,667
present value of year 3 cash flow = $1,024,166.67 * 0.7513 = $769,333
8. calculate the npv by summing up the present values of the cash flows and subtracting the initial investment:
npv = present value of year 1 cash flow + present value of year 2 cash flow + present value of year 3 cash flow - initial investment
npv = $930,000 + $846,667 + $769,333 - $2,410,000
npv = -$4,000
Learn more about Income here:
https://brainly.com/question/14732695
#SPJ11
A self service store employs one cashier at its counter. An average of nine customers arrive every 5 minutes while the cashier can serve 10 customers in 5 minutes. Assuming Poisson distribution for arrival rate and exponential distribution for service time, find: (i) average number of customers in the system; [2 marks] (ii) average number of customers in the queue or average queue length; [2 marks] (iii) average time a customer spends in the system; [2 marks] (iv) average time a customer waits before being served.
The average arrival rate = 9/5 minutes = λ Average service rate = 10/5 minutes = μNow, μ > λ, and both arrivals and service times follow Poisson and Exponential distribution respectively.
Then, the average number of customers in the system, Ls = λ/(μ - λ) = (9/5)/(10/5 - 9/5) = (9/5)/(1/5) = 9 Average queue length, L q = λ²/(μ(μ - λ)) = (9/5)² / (10/5)(10/5 - 9/5) = 81/45 = 1.8Average time a customer spends in the system, Ws = 1/(μ - λ) = 1/(10/5 - 9/5) = 5 minutes Average time a customer waits before being served, W q = λ/(μ(μ - λ)) = (9/5)/(10/5)(10/5 - 9/5) = 9/50*60 = 0.18 minutes Hence, (i) Average number of customers in the system = 9 (ii) Average number of customers in the queue or average queue length = 1.8 (iii) Average time a customer spends in the system = 5 minutes (iv) Average time a customer waits before being served = 0.18 minutes
We use the following formulas for solving the given problem: Average number of customers in the system, Ls = λ/(μ - λ)Average queue length, Lq = λ²/(μ(μ - λ))Average time a customer spends in the system, Ws = 1/(μ - λ)Average time a customer waits before being served, Wq = λ/(μ(μ - λ))
To know more about respectively visit:-
https://brainly.com/question/15221297
#SPJ11
Assume that a country is endowed with 24 units of oil reserve.
(a) the marginal willingness to pay for oil in each period is given by P = 13 – 0.56q
(b) the marginal cost of extraction of oil is constant at $3 per unit
(c) the discount rate is 1%
(d) the marginal cost of renewable energy is $9, where c
How long will it take, for a country to transition to a renewable energy source?
The country will transition to a renewable energy source in approximately 5 periods. To determine how long it will take for the country to transition to a renewable energy source, we need to compare the marginal cost of extraction of oil to the marginal cost of renewable energy.
In this case, the marginal cost of extraction of oil is constant at $2 per unit, while the marginal cost of renewable energy is $9. Since the marginal cost of renewable energy is higher than the marginal cost of oil extraction, the country will transition to a renewable energy source when the marginal cost of renewable energy becomes equal to or lower than the marginal cost of oil extraction.
Given the marginal cost of renewable energy at $9 and assuming the marginal cost of oil extraction remains constant at $2, it will take approximately 5 periods for the marginal cost of renewable energy to reach $2 or lower. Each period represents a time unit in the transition process. Therefore, in approximately 5 periods, the country will have transitioned to a renewable energy source, assuming the conditions and costs stated in the given information remain constant.
Learn more about marginal cost here: https://brainly.com/question/28932883
#SPJ11
True or False: Simple interest is used more frequently than
compound interest.
False. Simple interest is not used more frequently than compound interest. Instead, compound interest is used more frequently than simple interest.
Simple interest is calculated on the principal amount of a loan or investment. It does not include interest on interest earned or charged on the principal amount over a period of time. It is commonly used for short-term loans or investments, such as a personal loan or a fixed deposit, but it is not as commonly used as compound interest.
Compound interest, on the other hand, is calculated on both the principal amount and any accumulated interest. In other words, interest is added to the principal amount, and then interest is charged on the new total amount, including the interest already earned. It is typically used for long-term loans or investments, such as a mortgage or a savings account, and is more common than simple interest.
Learn more about Simple interest: https://brainly.com/question/30964674
#SPJ11
Calculate gross pay for each of the following employees. All are paid an overtime wage rate that is 1.5 times their respective regular wage rates.
NOTE: For simplicity, all calculations throughout this exercise, both intermediate and final, should be rounded to two decimal places at each calculation.
1:Anita Workman receives tips from customers as a standard component of her weekly pay. She is paid $2.50/hour by her employer and receives $284 in tips during the most recent 46-hour workweek.
Gross Pay = $
2:Cole Earnhardt receives tips from customers as a standard component of his weekly pay. He is paid 2.13/hour by his employer and receives $442 in tips during the most recent 42-hour workweek.
Gross Pay = $
3:Calista Flood receives tips from customers as a standard component of her weekly pay. She is paid $4.10/hour by her employer and receives $350 in tips during the most recent 38-hour workweek.
Gross Pay = $
4:Bethany Pugh receives tips from customers as a standard component of her weekly pay. She is paid $3.60/hour by her employer and receives $162 in tips during the most recent 51-hour workweek.
Gross Pay = $
To calculate the gross pay for each employee, we need to consider their regular Wage rate, the number of hours worked, and any tips they received. Since they are paid an overtime wage rate that is 1.5 times their regular wage rate, we will calculate the regular pay and the overtime pay separately, and then sum them up to get the gross pay.
1. For Anita Workman:
Regular pay = $2.50/hour x 46 hours = $115.00
Overtime pay = ($2.50/hour x 1.5) x (46 - 40) = $21.00
Gross pay = Regular pay + Overtime pay + Tips = $115.00 + $21.00 + $284 = $381.00
2. For Cole Earnhardt:
Regular pay = $2.13/hour x 42 hours = $89.46
Overtime pay = ($2.13/hour x 1.5) x (42 - 40) = $6.39
Gross pay = Regular pay + Overtime pay + Tips = $89.46 + $6.39 + $442 = $537.85
3. For Calista Flood:
Regular pay = $4.10/hour x 38 hours = $155.80
Overtime pay = ($4.10/hour x 1.5) x (38 - 40) = $-12.30 (no overtime hours)
Gross pay = Regular pay + Overtime pay + Tips = $155.80 + $-12.30 + $350 = $493.50
4. For Bethany Pugh:
Regular pay = $3.60/hour x 40 hours = $144.00
Overtime pay = ($3.60/hour x 1.5) x (51 - 40) = $54.00
Gross pay = Regular pay + Overtime pay + Tips = $144.00 + $54.00 + $162 = $360.00
Therefore, Anita Workman's gross pay is $381.00, Cole Earnhardt's gross pay is $537.85, Calista Flood's gross pay is $493.50, and Bethany Pugh's gross pay is $360.00.
learn more about gross pay here
https://brainly.com/question/13143081
#SPJ11
Marwa & Co purchased a parcel of land six years ago for $621560 At that time the firm invested $141872 in grading the site so that it would be usable. Since the Sam wasn't ready to use the ste at that time, it decided to leave the land for $53.500 a year. The company is now considering building a warehouse on the site as the rental lease is expiring The curent value of the land is $779989 What value should be included in the initial cost of the warehouse project for the use of this land?
To determine the value that should be included in the initial cost the value that should be included in the initial cost of the warehouse project for the use of this land is $304,443.
Opportunity cost is the value of the next best alternative forgone. In this case, the next best alternative use of the land would be to continue leasing it at $53,500 per year.Since the firm has been leasing the land for six years, the opportunity cost of using the land for the warehouse project is:Opportunity Cost = Annual Lease Payment * Number of Years = $53,500 * 6 = $321,000Therefore, the value that should be included in the initial cost of the warehouse project for the use of the land is $321,000.
To know more about land click the link below:
brainly.com/question/15501460
#SPJ11
Exercise 13-3 Accounting for par, stated, and no-par stock issuances LO P1
Rodriguez Corporation issues 8,000 shares of its common stock for $108,800 cash on February 20. Prepare journal entries to record this event under each of the following separate situations.
The stock has a $10 par value.
The stock has neither par nor stated value.
The stock has a $5 stated value.
Under each of the given situations, the following journal entries would be prepared to record the issuance of 8,000 shares of common stock for $108,800 cash:
When the stock has a $10 par value:
Cash $108,800
Common Stock (8,000 shares x $10) $80,000
Paid-in Capital in Excess of Par $28,800
Explanation: The cash received is debited for the total amount received. Common Stock is credited for the par value per share multiplied by the number of shares issued. The remaining amount is credited to Paid-in Capital in Excess of Par.
When the stock has neither par nor stated value:
Cash $108,800
Common Stock $108,800
Explanation: The cash received is debited for the total amount received. Common Stock is credited for the entire amount received since the stock does not have a par value or stated value.
When the stock has a $5 stated value:
Cash $108,800
Common Stock (8,000 shares x $5) $40,000
Paid-in Capital in Excess of Stated Value $68,800
Explanation: The cash received is debited for the total amount received. Common Stock is credited for the stated value per share multiplied by the number of shares issued. The remaining amount is credited to Paid-in Capital in Excess of Stated Value.
learn more about stock here:
https://brainly.com/question/24247849
#SPJ11
Friendly Company produces a single product. Recently, the company received a special order from a large national public corporation that wants to purchase 900 units of the company’s product at $110 each. Friendly Company’s usual individual orders are no more than 25 units. So, this proposed 900-unit order is much larger than their usual order.
Friendly Company must analyze the order's effects on both sales and profitability and assess whether taking the order is beneficial.
Friendly Company produces a single product. Recently, the company received a special order from a large national public corporation that wants to purchase 900 units of the company’s product at $110 each. Friendly Company’s usual individual orders are no more than 25 units. So, this proposed 900-unit order is much larger than their usual order. Let's discuss the financial implications of this proposed 900-unit order on Friendly Company. Financial implications of the proposed 900-unit order on Friendly Company:
Sales revenue
The revenue generated by the proposed order is $99,000 (i.e., 900 units × $110 per unit).
Profitability
The profit will be influenced by the unit product cost, which can differ depending on whether the 900 units can be made by repurposing existing plant capacity or whether it will need new machinery. Depending on the production process, the unit product cost might vary, and so the total profit might also differ. The profit will be positive if the unit product cost is less than $110 and negative if it is higher than $110.Inventory and working capitalThe business would need to increase its inventory by 900 units, resulting in an increase in working capital. This might lead to a reduction in the company's cash balance and an increase in inventory holding expenses.
Capacity utilization
Utilizing plant capacity to produce the 900-unit order can reduce the business's excess capacity. This would result in a higher production capacity utilization rate and might allow Friendly Company to increase its revenue by selling more items.
To know more about Capacity utilization, visit:
https://brainly.com/question/32170119
#SPJ11
Performance Across 2. Obligations that must be satisfied when the seller transfers goods or services to customers. 3. Not performance obligations but are a cost of satisfying performance obligations (plural). 4. Sellers that controls goods or services and are responsible for providing them to customers. Enu 8. Inflows from providing goods or services to customers. 9. When a customer has direct influence over the use of goods or services. 10. Specifies the legal rights and obligations of a seller and customer. 11. The amount of revenue that is recognized. 12. Recorded as deferred revenue and recognized as revenue as each performance obligation is satisfied (plural) 15. Consideration that is dependent upon the outcome of future events. Down 1. Goods are held by the customer, but seller maintains ownership until the goods are sold to the consumer. 5. Allows the customer to access the seller's intellectual property. 6. outflows of assets from the declines in market price of investments 9plural). 7. Inflows of assets from sale of used equipment above book value(plural). 8. Ensure that the appropriate amount of revenue appears in each period's income statement. payment after 13. These assets are recorded when a seller has unconditional right to receive satisfying a performance obligation (plural). 14. Facilitates the transfers between sellers and customers.
Across: 2. Performance obligations, Sellers, Inflows, Customer influence, Legal rights, Recognized revenue, Deferred revenues.
Down: Consignment, Intellectual property, Impairments, Gain on sale, Accounts receivable, Intermediary.
The sellers that control goods or services and are responsible for providing them to customers are primary obligors. As primary obligors, these sellers have the ability to direct the use of goods or services and have the contractual responsibility to fulfill the performance obligations outlined in the agreement with the customer. They are accountable for ensuring the delivery and quality of the goods or services, and they bear the risks associated with the transaction. This includes the transfer of control and the transfer of legal rights and obligations to the customer. By being the primary obligors, these sellers have the authority and capability to fulfill their obligations and satisfy customer expectations.
To know more about Recognized revenue visit:
https://brainly.com/question/28500813
#SPJ11
Which of the following statements is NOT true? Evaluating opportunity costs helps to determine comparative advantage Countries that focus on producing goods for which they have a comparative avantage specialize In a two-good market, a country can only have absolute advantage in one good Trade is driven by comparative advantage. Incorrect. This is a true statement Learning Objective: Define absolute advantage.comparative advantage, and opportunity costs
The statement "In a two-good market, a country can only have absolute advantage in one good" is not true.
Absolute advantage refers to the ability of a nation or producer to manufacture a commodity more efficiently and with fewer resources than another producer or nation. Comparative advantage, on the other hand, is the ability of a nation or producer to generate a product or service at a lower opportunity cost than another producer or nation. Opportunity cost is the cost of choosing one item over another. The term "In a two-good market, a country can only have absolute advantage in one good" is not valid because the absolute advantage can be possessed in both products, however, the comparative advantage can only be possessed in a good. Additionally, it is possible that no country has an absolute advantage in both goods or in either good, but rather that they have a comparative advantage in one good. Hence, this statement is NOT true. Trade is driven by comparative advantage, and evaluating opportunity costs helps to determine comparative advantage. Countries that concentrate on producing goods for which they have a comparative advantage specialize.For more questions on absolute advantage
https://brainly.com/question/31408160
#SPJ8
Which costs are considered an inventoriable/product cost under both absorption costing and variable costing? Variable Admin Direct Materials Fixed Selling Fixed MOH Direct Labor Fixed Admin Variable S
Direct materials and direct labor costs are considered an product-inventoriable cost under both absorption costing and variable costing. For that reason, the correct options are the second and penultimate.
Direct materials and direct labor costs (second and penultimate options) are part of the Inventoriable costs are the costs incurred to produce goods or services that are expected to be sold to customers.
These costs include direct materials and direct labor are initially recorded in inventory accounts on the balance sheet. When the goods are sold, the costs are then transferred from the inventory accounts to the cost of goods sold (COGS) account on the income statement.
Absorption costing is a method of accounting for costs that allocates both variable and fixed manufacturing overhead costs to products. Under absorption costing, all costs of production are inventoried as part of the cost of the product. This includes direct materials, direct labor, and both variable and fixed manufacturing overhead costs.
These costs are not expensed until the product is sold, at which point they are included in the cost of goods sold.
Variable costing is a method of accounting for costs that only allocates variable manufacturing costs to products. Under variable costing, direct materials, direct labor, and variable manufacturing overhead costs are included in the cost of the product.
In conclusion, direct materials and direct labor costs are considered an inventoriable/product cost under both absorption costing and variable costing.
Learn more about inventoriable cost: https://brainly.com/question/31214147
#SPJ11
