TRUE/FALSE. waves are formed by the interrption of the crest of the wave as it slows down over the faster moving bottom of the wave.

When we move the magnet back and forth inside the coil of the wire,  it will produce a voltage.

When a magnet moves into a coil of wire, the magnetic field and flux through the coil change, creating a voltage in the coil according to Faraday's Law. In the example shown below, as the magnet moves into the coil, the galvanometer deflects to the left in response to the increasing magnetic field. When a magnet or coil repeats the reciprocating motion, alternating current is generated. Generators and transformers use electromagnetic induction to generate electricity and change the voltage of current. When the magnet is moved towards the coil, a current is induced in the coil due to the phenomenon of electromagnetic induction. The relative motion between the magnet and coil induces an electromotive force (EMF), which induces a current in the coil.

Learn more about the magnets in

https://brainly.com/question/2841288

#SPJ4

The weight of the combined system is 203 kg.

What is mean by density?

The density is the ratio of mass to volume. It is typically expressed as kilograms per cubic meter (kg/m3) and is used to quantify the physical properties of different materials.

Density is an important property as it affects the material’s ability to resist changes in pressure, temperature, and other physical forces.

It is also used to determine the composition of certain substances, such as the amount of salt in a solution.

Density is an intrinsic property of a material and is not affected by the size or shape of the sample being measured.

Density can be determined by measuring the mass of an object and dividing it by its volume. The density of a substance can be compared to that of other substances to determine relative densities.

Density is used in many areas of science such as physics, chemistry, engineering, and geology.

Density is also important to the study of materials, as it can be used to identify and characterize them. Density is an important parameter when considering the structural and mechanical properties of materials.

Step 1: Calculate the mass of water in the tank.

Mass of water = Volume of water x Density of water

Mass of water = 0.2m^3 x 1000 kg/m^3

Mass of water = 200 kg

Step 2: Calculate the weight of the combined system.

Weight of the combined system = Mass of tank + Mass of water

Weight of the combined system = 3 kg + 200 kg

Weight of the combined system = 203 kg

To learn more about density of water refer to:

brainly.com/question/28734050

#SPJ4

A simple machine is a device that uses a single applied force to do work against a single load force. Simple machines do not involve the use of electricity or combustion, and are typically used to amplify or change the direction of applied forces.

The six types of simple machines are:

Lever: A bar that pivots around a fixed point, or fulcrum, to amplify or change the direction of applied forces.

Pulley: A grooved wheel with a rope or cable passing over it, used to change the direction of an applied force.

Inclined Plane: A flat surface that is angled, used to reduce the amount of force needed to lift an object.

Wedge: A triangular shape with one sloping side, used to split or lift objects by applying force at the sloping angle.

Screw: A spiral groove that helps convert rotational motion into linear motion.

Wheel and Axle: A cylinder that rotates around a central point (the axle), used to reduce the amount of force needed to move an object.

It is due to problem in commutator or split rings that reverse the current in the coil by which the  energy armature completes its rotation.

Rotation describes the circular motion of an object around its center. There are different ways things can rotate. energy, in physics, the capacity for doing work. Rotation of the Earthre. A very familiar kind of rotation is when a spherical, three-dimensional object turns around an invisible line inside its center.

Rotational movement involves moving the bone around its longitudinal axis; energy in the process of transfer from one body to another.  this can be movement toward the midline of the body (medial rotation) or away from the midline of the body lateral rotation.

To know more about energy visit

https://brainly.com/question/1932868

#SPJ4

The Milky Way and Andromeda galaxies are roughly 2.5 million light-years apart. If we scale that down to the size of a marble, then the distance between the two galaxies would be 25 cm.

To learn more about galaxies refer to:

https://brainly.com/question/13956361

#SPJ4

The force responsible for the bouncing of the ball is the gravitational force.

According to Newton's law of universal gravitation, the gravitational force between any two bodies is directly proportional to the product of their masses and inversely proportional to the square of the distance between them. Gravity is the force with which objects are attracted to the earth. Example - Leaves and fruit fall from a tree to the ground due to gravity. Gravitational energy is the energy stored in an object due to its height above the Earth (for example, when the object is far from the ground or near it). It is a form of potential energy. An object's height above the ground gives it its gravitational energy. This force is responsible for the bouncing of the ball when it hits the ground.

Learn more about the fundamental forces in

https://brainly.com/question/14110395

#SPJ4

When you park on a hill, the direction your front wheel are pointed determines which direction your car will roll if the brakes fail

Option D is correct.

Adjust your front tires so that, in the event of a brake failure, all front wheels are always pushed away from or lightly contact the curb if there is no curb.

When going uphill and coming close to a curb, turn the front tires against the curb. and make use of the curb as a barrier by letting your car slowly drift backward until the left rear wheel is resting there.

Turn the wheels to the curb.

Turn your vehicle away from the curb when parking uphill. Turn them so that they are facing the curb if you are parking downhill. Step on the brake while the vehicle is in neutral, then fully rotate the steering wheel in the desired direction.

Question incomplete:

When you park on a hill, the direction your ____ are pointed determines which direction your car will roll if the brakes fail.

A. Side mirror

B. doors

C.rear wheels

D.front wheels

Learn more about front wheel:

brainly.com/question/14040365

#SPJ4

A field study is more appropriate that a laboratory experiment when we need to know the real mining of unknown variables in a given outcome such as for example dark matter in space.

Unknown variables in science can be defined as variables that have yet to be identified or studied, either due to a lack of data or unknown factors.

Therefore, with this data, we can see that unknown variables in science such as the amount of  Dark matter in the Universe are able to be shown by field (observational) studies.

Learn more about variables in science here:

https://brainly.com/question/28362817

#SPJ1

Velocity = distance / time  = 300m / 100s

            = 3 m/s

Velocity is the direction at which an object is moving and serves as a measure of the rate at which its position is changing as seen from a specific point of view and as measured by a specific unit of time (for example, 60 km/h northbound).

A physical vector quantity called velocity must have both a magnitude and a direction in order to be defined.

Speed is the scalar absolute value (magnitude) of velocity; it is a coherent derived unit whose quantity is measured in metres per second (m/s or m/s1) in the SI (metric system).

Therefore, Velocity = distance / time  = 300m / 100s

            = 3 m/s

To learn more about Velocity, refer to the link:

https://brainly.com/question/28738284

#SPJ1

Both kinetic energy and momentum is conserved in this hit since it is perfectly elastic. Vf = mV + M0 = (m + M)v is the speed of the block/bullet system after the contact.

In physics, an elastic collision is a collision between two bodies in which the total kinetic energy remains constant. In an ideal, elastic collision, there is no net conversion of kinetic energy into heat, noise, or potential energy. In physics, kinetic energy (KE) is the energy that an object has as a result of its motion. Both kinetic energy and momentum are conserved in this hit since it is completely inelastic. Vf = mV + M0 = (m + M)v is the speed of the block/bullet system after the contact. It is defined as the effort necessary to move a mass-based body from rest to the given velocity. in kinematics and everyday usage.

Learn more about  kinetic energy here

https://brainly.com/question/26472013

#SPJ4

The magnitude of the force exerted on the man by the lawn mower is equal in magnitude to the force exerted by the man on the lawn mower, thus the answer is the third option i.e. the same.

Following are the three Newton's Law of Motion:

First Law - Newton’s first law of motion states that if a body or a object is at rest or moving at any constant speed in a straight line, it will remain at rest or keep moving in that straight line at that constant speed unless it is acted upon by a force. This law is known as Law of Inertia.

Second Law - Newton’s second law of motion is a quantitative description of the changes that any force can produce/insert on the motion of a body. It states that the timely rate of change of the linear momentum of a body is equal in both the magnitude and the direction to the force imposed on it.

Third Law - Newton’s third law of motion states that when two bodies interact, they both apply forces to one another that are equal in magnitude and opposite in direction. This third law of motion is also known as the law of action and reaction.

Using principles of third law of motion, we can make that the man pushing the lawn mower applies the same amount of force (in magnitude) as the lawn mower applies on him, thus the answer to the question is the third option i.e. the same.

Learn more about force here:

https://brainly.com/question/13191643

#SPJ4

Answer:

The Moon appears to be bright from Earth because it reflects sunlight and the sunlight is reflected back to Earth, making it visible to us. However, when viewed from space, the Moon appears dark because it does not emit its own light and the sunlight is not reflected back towards the observer in space.

a pharmacist is compounding a hazardous preparation in the primary engineering control of a buffer room. if the pressure of the ante room is 0.06 inches water column, the pressure in the buffer room must be USP 797  inches water column.

The gowning room and ante room must be Class 8 or better, and the buffer room must be ISO Class 7 or better (less than 352,000 particles-per-cubic-meter) (less than 3,520,000 particles-per-cubic meter).

The principal engineering control, which is situated in the buffer region, performs sterile compounding (also known as the clean room). The equipment used for non-sterile compounding is a containment ventilated device. Sterile compounding can be done for immediate use outside of an ISO 5 facility in an emergency.

Learn more about pressure

https://brainly.com/question/28012687

#SPJ4

To convert 1 liter (L) to milliliters (mL), you would multiply 1 by 1000, because there are 1000 mL in 1 L. Therefore, 1 L is equal to 1000 mL.

0.01ml=0.00001L,100mL=0.1L,62L=62000mL,1.02 L = 1020 mL,

912 mL=0.912 L,0.55 L = 550 mL.

How to convert these given volume to the mising units?

To convert 0.01 milliliters (mL) to liters (L), you would divide 0.01 by 1000, because there are 1000 mL in 1 L. Therefore, 0.01 mL is equal to 0.00001 L.

To convert 100 milliliters (mL) to liters (L), you would divide 100 by 1000, because there are 1000 mL in 1 L. Therefore, 100 mL is equal to 0.1 L.

To convert 62 liters (L) to milliliters (mL), you would multiply 62 by 1000, because there are 1000 mL in 1 L. Therefore, 62 L is equal to 62000 mL.

To convert 1.02 liters (L) to milliliters (mL), you would multiply 1.02 by 1000, because there are 1000 mL in 1 L. Therefore, 1.02 L is equal to 1020 mL.

To convert 912 milliliters (mL) to liters (L), you would divide 912 by 1000, because there are 1000 mL in 1 L. Therefore, 912 mL is equal to 0.912 L.

To convert 0.55 liters (L) to milliliters (mL), you would multiply 0.55 by 1000, because there are 1000 mL in 1 L. Therefore, 0.55 L is equal to 550 mL.

It's important to note that when converting between units of volume, the conversion factor is always the same, but the direction of the conversion can change depending on which unit is being converted to or from.

To learn more about volumes refer :

brainly.com/question/463363

#SPJ4

The proper way to fire a shotgun is raise the shotgun to the cheek and back to the shoulder, on the side of the dominant eye; and point at the target.

Shotguns are generally fired at a target and not aimed like rifles.  They discharge shells or loads that may include a propellant wadding followed by a slug, shot, or other type of specialized projectile.

It is possible to fire a conventional bullet from a shotgun, which typically fires a plastic "shell" filled with numerous projectiles called "shot." This is accomplished using a device known as a "sabot" .

This is a single bullet that is loaded into a shotgun shell and is protected by a plastic or foam cylinder. After being fired, the plastic or foam cylinders separate along pre-scored lines and fall away as the single bullet continues on its course.

Learn more about shotguns:

brainly.com/question/2988517

#SPJ4

You should use the thin cooking twine to have the fastest wave speed in  telephone.

The wave speed in string is determined by tension in the string and the mass per unit length (linear density) of the string.

The speed of a wave in a string is given by ; v = sqrt(T/μ)

T -- tension and μ-- linear density.

When comparing the two types of string, thin cooking twine has smaller mass per unit length (linear density) than the heavy rope, so it would have  faster wave speed.

The thinner the string, the less the density of the string and the faster the wave speed will be. Therefore, you should use the thin cooking twine to have the fastest wave speed in your telephone.

To know more about wave speed, refer

https://brainly.com/question/29798763

#SPJ4

Erikson believed that the adverse effect of early childhood was an excessively rigid superego that led to children feeling excessive guilt as a result of adults' excessive threats, criticisms, and punishments.

A body that does not deform or change shape is idealized as a rigid body. Formally, it is described as a group of particles with the property that their distance from one another does not change as the body moves. A solid body that neglects deformation is referred to as a rigid body. In other words, regardless of the forces acting on a rigid body, the distance between any two points remains constant over time. A metal rod serves as an illustration of a rigid body.

Here,

Erikson thought that an excessively rigid superego, brought on by adults' excessive threats, criticisms, and punishments, was the negative effect of early childhood, which caused children to experience excessive guilt.

To know more about rigid,

https://brainly.com/question/17156004

#SPJ4

2.3m/s^2 is the car's average acceleration.

Describe acceleration.

Acceleration is the term used to describe how quickly velocity and speed change over time. It is referred to as accelerating when something changes its rate of motion. Because the direction is constantly shifting, motion on a circle accelerates even at constant speed.

According to Newton's Second Law, an object's acceleration is determined by the total force acting on it. Meters per second squared (m s2) is the unit of acceleration in the SI system. The distance an object travels in a specific amount of time is referred to as its speed.

v = u + at

v = 5m/s

u = 26m/s

t  = 9sec

5 = 26  a*9

a = -21/9

a = -2.3m/s^2

To learn more about acceleration use link below:

brainly.com/question/460763

#SPJ1

The charge deposited in the lower left quadrant will experience an electric force of 98.32 psi. Additionally, the direction is 74.49.

The size of an object is its magnitude. For example, a car moves faster than like a bike in regards to speed. In this instance, the speed differential between both the car and also the bike is higher. It exposes the size or motion of an object in terms of absolute or relative dimensions.

A quantity with both a path and a quantity is called a vector. An abundance or a numerical amount of something is referred to as a magnitude. Another vector is displacement amount, which is the separation between a beginning point and an ending location.

To know more about Magnitude visit:

https://brainly.com/question/28173919

#SPJ4

A projectile moves both vertically and horizontally independently of one another. Therefore, regardless of their horizontal velocities, two objects falling under the influence of gravity from the same height will hit the ground at the same time.

The vertical force acts perpendicular to the horizontal motion and has no effect on it because perpendicular components of motion are independent of one another. The projectile as a result moves with a decreasing vertical acceleration and a constant horizontal speed. The principle that horizontal and vertical motions are independent, or that they have no bearing on one another, is the most crucial one in projectile motion. The amount of time needed for an object to move initially horizontally is equal to the amount of time needed for the object to reach its final height. As a result, a ball dropped from the same height and thrown horizontally will both arrive at the ground simultaneously.

Here,

A projectile moves independently in both the vertical and horizontal axes. Therefore, two objects falling under the influence of gravity from the same height will hit the ground at the same time regardless of their horizontal velocities.

To know more about motion,

https://brainly.com/question/13966796

#SPJ4

Pressure in a liquid with constant density is given by the equations: p 0 = g h p = p 0 + g h. Consequently, pressure on the fluid at a depth. pressure difference = 5886 pa  Area=5886*0.050 = 294 N

The power per unit area is measured by fluid pressure. Altitude, velocity, or pressures in a confined container can all result in fluid pressure. A liquid has no fixed shape, hence its pressure is uniform throughout.

14)

: Pressure= force area

Force is weight of liquid = mass * gr

Area = A

O pressure = pgh

Step: 3

calculated above pressure P =pg P = pg(h₂ - h₁)

1,000 × 9.81 × (0.8 -0.2)

= 5,886.00

Pressure difference = 5886 pa

Similar to the air on the inside of a tire, all liquids exert pressure. Fluid particles constantly and randomly move in all directions. The particles continue to collide with one another and with anything else in their path as they proceed.the pressure difference corresponds to pressure boy puts on platform which is equal to boy's weight divided by area.

Weight = pressure * Area

=5886*0.050 = 294 N

To know more about particles visit:

https://brainly.com/question/18750504

#SPJ4

Answer:

10

if we calculate using the quantity of the moon you see that he was in Paris

The tensions in the rod

(a) at the pivot is 2mg

(b) At the point P when the system is stationary is  mg (1+y/L)

(c) The period of oscillation for small displacements from equilibrium.

(d) For L = 2.00m, t = 2.68 s

As long as the spring is not stretched out of shape, the period T of the oscillating system is independent of the displacement from rest. The time it takes for a system to complete one oscillation before returning to its initial position is known as the period.

Does a rod have tension?

In physics, tension is defined as the pulling force that is transmitted axially through the use of a string, rope, chain, or similar object, or by the ends of a rod, truss member, or other similar three-dimensional objects. Tension can also be defined as the action-reaction pair of forces acting at the ends of the aforementioned elements.

(a) At the pivot,

F = mg + mg =2mg

(b) At the point P when the system is stationary,

F = mg (y/L) + mg = mg (1+y/L)

(c) The period of oscillation for small displacements from equilibrium,

(d) For L = 2.00  m

t = 2.68 s

The tension in the rod at the pivot is 2mg, and at the point P when the system is stationary is mg (1+y/L).

To know more about tension visit:

brainly.com/question/15129630

#SPJ4

Time when the power delivered to the circuit element is maximum is        [tex]t = ln(80,000f0/75) / (-5)[/tex]), B) The maximum value of power [tex]12f0 A[/tex],C)The total energy delivered to the circuit element is [tex]E = ∫ P dt = ∫ (80,000f0 x 15te^-5t) dt = 12f0 x (1/e^5) x (1-e^-5t)[/tex]

What is the total energy and maximum value of power delivered to the circuit?

a) To find the time when the power delivered to the circuit element is maximum, we need to find the time when the product of voltage and current is maximum.

Power = voltage x current = [tex]80,000f0 x 15te^-5t A[/tex]

The power will be maximum when the derivative of Power with respect to time is zero.

[tex]dP/dt = 0 = 80,000f0 x 15e^-5t - 75e^-5t A[/tex]

[tex]t = ln(80,000f0/75) / (-5)[/tex]

b) To find the maximum value of power, we can substitute the value of t in the equation of power.

[tex]P = 80,000f0 x 15e^-5(ln(80,000f0/75) / (-5)) A = 12f0 A[/tex]

c) To find the total energy delivered to the circuit element, we can integrate the power with respect to time.

[tex]E = ∫ P dt = ∫ (80,000f0 x 15te^-5t) dt = 12f0 x (1/e^5) x (1-e^-5t)[/tex]

The total energy delivered to the circuit element is[tex]12f0/e^5[/tex]

It's worth noting that this solution assumes that the circuit element is a linear element that follows Ohm's law and Kirchhoff's laws. If the circuit element is nonlinear this solution may not be valid.

To learn more about voltage refer:

https://brainly.com/question/13521443

#SPJ4

Total mechanical energy of the Earth-Moon system=[tex]-\frac{GM_{e} M_{m}}{2R}[/tex]

Keeping in mind Kepler's first law, the planets orbit the Sun in elliptical fashion. This implies that as a planet orbits the Sun, the separation between the centres of masses, r, will change. As r varies, this causes a change in the planet's gravitational potential energy.The system's overall mechanical energy is crucially stable throughout its orbit. A planet's gravitational potential energy will drop as it orbits in a position close to the Sun, but its velocity and kinetic energy will grow. The system's overall mechanical energy is always constant because the increase in kinetic energy balances off the system's loss in gravitational potential energy.

Total potential energy of earth and moon=[tex]-\frac{GM_{e} M_{m}}{R}[/tex]

Velocity of moon=[tex]\sqrt\frac{GM_{e} }{R}[/tex]

Kinetic energy of moon=[tex]\frac{1}{2} M_{m} v^{2}[/tex]=[tex]\frac{1}{2} \frac{GM_{e} M_{m}}{R}[/tex]

Learn more about mechanical energy

brainly.com/question/16916593

#SPJ4

Answer: Depends

Explanation:

It completely depends on your religion and beliefs. This is not a question you can truly answer since it's opiniative.

The height(in m) she has raised herself as she crosses the bar with initial speed of 8.7m/s is found to be 3.76m

A fundamental law of physics and chemistry asserts that despite internal changes, the overall energy of an isolated system remains unchanged. It is the fundamental premise of the first law of thermodynamics, which is most frequently stated as "energy cannot be created or destroyed."

Mass of the women => 60Kg

V1 => 8.7 m/s

v2=> 1.4m/s

Conservation of energy:

Kinetic energy 1 = Kinetic energy 2 + Potential energy

1/2 m v1^2 = 1/2 m V2^2 + mgh

V1^2 -v2^2/2 xg => h => height she raised

h=> 3.76m

There are three essential quantities in mechanics which are conserved. They are power, forward motion, and angular momentum.

Learn more about speed here:

brainly.com/question/8618202

#SPJ4

Mercury's Temperature is used to describe these given parameters.

What time is it in the day?

The time period known as "day" spans from the variable time of dawn to the time of darkness (roughly 6 o'clock). It is nighttime from sunset until sunrise. At midnight, each day officially begins. Just after midnight, AM (ante-meridiem, Latin for "before noon") starts.

How long are days?

While the exact number of daylight hours on any given year varies from location to location, there is an average of 12 hours of sunshine per day everywhere on Earth. The length of daylight each day is only about 12 hours near the equator of the planet.

To know more about temprature visit:

https://brainly.com/question/4735135

#SPJ4

The electric potential moving along the central axis of the ring from a distance of 3r away to the center of the ring is decreasing. Thus, Option b is correct.

Radius is a term used in geometry to describe the length of a line extending from the center of a circle to the edge of the circle. This line is also referred to as the radius of the circle. The radius is half the distance of the diameter, which is the line that goes from one side of the circle to the other. The radius is also used in other shapes such as ellipses, rectangles, and polygons.

This is because the electric field lines radiate outward from the circumference of the ring, and as a result, the electric potential is lower near the circumference and higher further away from the circumference. As one moves closer to the center of the ring, the electric potential decreases.

To know more about radius click-

brainly.com/question/24375372

#SPJ4

Full question:

A circular thin ring of radius r has a negative charge uniformly distributed around its circumference. which of the following is the best qualitative description of the electric potential moving along the central axis of the ring from a distance of 3r away to the center of the ring?

a. Increasing

b. Decreasing

c. Accelerating

d. Retαrding

Minimum, First Quarter, Median, Third Quarter, Maximum 1.700 2.500 2.700 2.752 2.950 4.200,the length (x) [1] 27 boxplot(x,main="Data boxplot")

We may create the boxplot by doing the following:

Data provided

These procedures can be used to create the necessary boxplot.

Order the data set first.

1.7 2.0 2.2 2.2 2.4 2.5 2.5 2.5 2.6

2.6 2.6 2.7 2.7 2.7 2.8 2.8 2.8 2.9

2.9 2.9 3.0 3.0 3.1 3.1 3.3 3.6 4.2

2) Determine the median.

Since there are 27 variables, position 14 would be the median in this situation.

Average = 2.7

3) Determine Q1.

Below 2.7 are the following data values: 1.7 2.0 2.2 2.4 2.5 2.5 2.5 2.6 2.6. Their median falls in the centre: Q1 = 2.5

4) Determine Q3.

The following data values are found above 2.7: 2.8 2.8 2.8 2.9 2.9 3.0 3.0 3.1 3.3 3.6 4.2.

Their median is in the centre: Q3 = 2.95

5) Determine the maximum and minimum.

Min = 1.7, Max = 4.2

6) Determine IQR

IQR= Q3-Q1= 2.95-2.5=0.45

7) The boxplot's minimum and maximum values

IQR = 2.5-1.5*0.45=1.825; MWB = Q1-1.5

IQR = 2.5 + 1.5 * 0.45 = 3.17 UWB = Q3 + 1.5

8) Recognize outliers

Potential outlier values include those that exceed UWB and fall below MWB.

And using the R code below, we can create the boxplot:

> x<-c(1.7, 2.0, 2.2, 2.2, 2.4, 2.5, 2.5, 2.5, 2.6,

+ 2.6, 2.6, 2.7, 2.7, 2.7, 2.8, 2.8, 2.8, 2.9,

+ 2.9, 2.9, 3.0, 3.0, 3.1, 3.1, 3.3, 3.6, 4.2)

To recap: (x)

Minimum, First Quarter, Median, Third Quarter, Maximum

1.700 2.500 2.700 2.752 2.950 4.200

the length (x)

[1] 27

boxplot(x,main="Data boxplot")

And as you can see, the image below is also connected.

To learn more about boxplot refer to:

https://brainly.com/question/14746483

#SPJ4