The candles should be lit at 12 PM (noon) for the stub of the first candle to be twice the length of the second candle at 4 PM.
How can we conclude so.To determine the time at which the candles should be lit so that at 4 PM one stub is twice the length of the other, we need to use the concept of similar triangles.
Let's call the length of the first candle (the one that burns out in 3 hours) as x. The length of the second candle (the one that burns out in 4 hours) as y.
At 4 PM, the first candle will have burnt out completely, while the second candle will have only burnt out (4/3) of its length.
So, the length of the stub of the second candle is y(4/3). Now we know that x = 2(y(4/3))
We can solve for x and y by using the proportion (x/3 = y/4).
Comparing both equations we can conclude that the first candle should be lit at 12:00 PM in order to fulfill the condition.
Learn more about Pendulum here
https://brainly.com/question/14759840
#SPJ4
shown here are six galaxies, each labeled with its approximate distance from earth. rank the galaxies from left to right based on the amount of time it has taken their light to travel to earth, from the longest time to the shortest time. - 10 billion light-years
- 5 billion light-years
- 2 billion light-years
- 800 million light-years
- 230 million light-years
- 70 million light-years
light takes 100 million years to reach us from a galaxy that is 100 million light-years away. This fact has important implications to the study of the evolution of the universe, as you'll see in Part B 5 billion light-years
The correct answer is 5 billion light-years.
What number of galaxies are there?There were about 10,000 galaxies in this small area of the sky, all varying in size and shape. Astronomers estimated that there are between 100 and 200 trillion galaxies by multiplying this figure by how many times this tiny area of sky could fit into the sky.
Is Earth visible from Andromeda?About 2.5 million light-years away, Andromeda is the sole galaxy in the Local Group that is both more massive and has more stars than the Milky Way. Someone currently in Andromeda would.
To know more about galaxies visit:
brainly.com/question/14602132
#SPJ4
consider a set-up in which a transmitter is transmitting either a 0 or a 1 and the receiver indicates that it received either a 0 or a 1. denote the events that i
Complete Question: Consider a set-up in which a transmitter is transmitting either a 0 or a 1 and the receiver
indicates that it received either a 0 or a 1. Denote the events that i = 0, 1 was transmitted by Ti and the
events that i = 0, 1 was indicated as received by Ri.
Consider a scenario where the transmitter transmits a 0 or a 1, and the receiver reports receiving a 0 or a 1. The events may be identified, and performance metrics can be computed.
Events of a transmitter in transmitting either a 0 or a 1 have been denoted below:
Tx = Transmitter sends a signal
Rx = Receiver receives a signal
Tx = 0, Rx = 0 = Transmitter sends a 0 and Receiver receives a 0 (correct reception)
Tx = 0, Rx = 1 = Transmitter sends a 0 and Receiver receives a 1 (error)
Tx = 1, Rx = 0 = Transmitter sends a 1 and Receiver receives a 1 (error)
Tx = 1, Rx = 1 = Transmitter sends a 1 and Receiver receives a 1 (correct reception)
These events can be used to calculate various performance metrics such as probability of error, bit error rate, and signal-to-noise ratio.
It's worth noting that errors can happen due to multiple reasons, such as noise, interference, or malfunctioning equipment. The specific metric that is used to evaluate the performance of the system will depend on the requirements of the specific application. For example, in a communication system, the bit error rate (BER) is an important metric, which is the ratio of the number of bits received in error to the total number of bits received. In a control system, the probability of error (PoE) may be more relevant, which is the probability that the receiver will indicate a different value than the one transmitted.
It's important to have a clear understanding of the system requirements and constraints in order to choose the appropriate metric to evaluate the system performance and to ensure that the system meets the desired performance levels.
Learn more about transmitter here:
https://brainly.com/question/14477607
#SPJ4
A low-strength aspirin tablet (sometimes called baby aspirin) contains 81 mg
of the active ingredient. How many kilograms of the active ingredient does a 100‑tablet bottle of baby aspirin contain?
Answer:
0.0081 kg
Explanation:
A low-strength aspirin tablet contains 81 mg of the active ingredient. To find the total amount of active ingredient in a 100-tablet bottle, we can multiply the amount per tablet by the number of tablets:
81 mg/tablet * 100 tablets = 8,100 mg
To convert milligrams (mg) to kilograms (kg), we divide by 1,000,000.
8,100 mg / 1,000,000 = 0.0081 kg
So a 100-tablet bottle of baby aspirin contains 0.0081 kg of the active ingredient.
Answer:
0.0081 kg
Explanation:
number of 81 mg pills
1 kg = 106 mg
1.05005 x 105 kg = 1.05005 x 1011 mg
n = 1.5005 x 1011 / 8.1 x 10
n = 0.129635802 x 1010
n = 1.29635802 x 109
hope it helps :)
Mark me as brainliest!
calculate the magnitude of the electric field at the origin due to the following distribution of charges q at x y a a q at a a q at a a and q at a a where a 1.35 10 7 c and a 6.15 cm
Then the magnitude of the electric field at the origin is:
|E| = √(4* (9.0*10^9 q)^2) = 1.8 * 10^9 q N/C
The magnitude of the electric field at the origin is directly proportional to the charge q.
What size is the electric field at the starting point?The electric field at a point due to a point charge is given by Coulomb's law as:E = k*q/r^2where q is the charge, E is the electric field, k is Coulomb's constant, equals 1/4, k is the Coulomb constant, and r is the separation between the point of the charge and the point where the electric field is being computed. In this case, we have four point charges at the positions (1.3510^-7, 1.3510^-7), (1.3510^-7, -1.3510^-7), (-1.3510^-7, 1.3510^-7) and (-1.3510^-7, -1.3510^-7) with charge q.The electric field at the origin (0,0) due to each charge can be calculated using Coulomb's law. Since the charges have the same magnitude q, the vector sum of the electric fields due to each charge at the origin is the sum of the individual electric fields.The magnitude of the electric field at the origin due to the charge distribution is:|E| = √(E1^2 + E2^2 + E3^2 + E4^2)where E1, E2, E3 and E4 are the electric fields at the origin due to each charge respectively.It should be noted that the given distance a is in cm but the equation for Coulomb's law uses meters so it should convert the distance to meter.The distance between each charge and the origin is:r = √((1.3510^-7)^2 + (1.3510^-7)^2) = 1.9 * 10^-7 mThe electric field due to each charge is:E = kq/r^2 = (1/4πε) * q / (1.910^-7)^2 = 9.0 * 10^9 q N/CThen the magnitude of the electric field at the origin is:|E| = √(4* (9.0*10^9 q)^2) = 1.8 * 10^9 q N/CThe magnitude of the electric field at the origin is directly proportional to the charge q, as we can see in the formula above.To learn more about magnitude refer:
brainly.com/question/24468862
#SPJ4
which of the following is an example of something that undergoes acceleration while moving at constant speed? select all that apply
An object undergoing acceleration while moving at a constant speed, changes it's velocity keeping a constant speed but changes the direction of motion. Answer to the question is Option 2.
In mechanics, acceleration of a body is the rate of change of it's velocity with respect to time. Accelerations are vector quantities (in way that they have both magnitude and direction).
For an object to undergo acceleration but with a constant speed means that the direction part of the velocity vector is variable.
Let's discuss all the options one by one:
A man standing in an elevator - For a man standing in an elevator, speed changes with time. In this case, the apparent weight of the person is used. Because the speed, a scalar quantity, changes in the case, it can be eliminated.A car making a circle in a parking lot - For a car moving in a circle in a parking lot, the speed is constant, but the direction of the displacement vector constantly changes for all points of the the path, hence the velocity vector is variable, thus causing an acceleration called the centripetal acceleration. But the net acceleration of the motion is zero in a uniform circular motion. Hence, this option is our answer.A football flying in the air - For a football flying in the air, whether under freefall or in a projectile motion, the speed changes accordingly, thus terminating the required parts of the question. Hence, this too is eliminated.A car moving straight backwards on the road - For a car to move back in a straight path, it may be under acceleration, which causes the speed to increase but the direction to be the same, hence again the requirements of the question are not fulfilled, thus this option too must be eliminated.SO, the answer to the question is Option 2.
Learn more about acceleration here:
https://brainly.com/question/12550364
#SPJ4
The correct question should be:
Which of the following is an example of something that undergoes acceleration while moving at a constant speed?
A man standing in an elevatorA car making a circle in a parking lotA football flying in the airA car moving straight backwards on the roadNone of these.A spring is stretched by 35 cm and attached to a 500 g air-track glider, which is then released. The spring does 0.25 J of work on the glider as it returns to its equilibrium length. What is the value of the spring constant? Express your answer with the appropriate units.
The supplied statement indicates that the spring constant has a value of 4.08 N/m.
What forces do springs contain?A spring creates a force F = -kx in the direction of its equilibrium position when it is pushed or stretched to a length that differs by an extent x from its solution length. A spring's force serves to return the spring itself to equilibrium length; it is a restorative force.
Stretched by spring using x = 35 cm = 0.35m
Spring work equals 0.25 J
When a spring is extended, it stores energy = 1/2kx²
Spring will utilize this enthusiasm to do work.
[tex]W=\frac{1}{2} k x^2 k=\frac{2 W}{x^2} k=\frac{2^* 0.25}{0.35^2} k=4.08 \mathrm{~N} / \mathrm{m}[/tex]
To know more about Spring visit:
https://brainly.com/question/14670501
#SPJ4
you have been asked to design an experiment to show whether spaghetti cooks faster with or without salt in the cooking water. which of the following is the variable being tested?
The quantity of water used, the type of spaghetti used, and the intervals at which the spaghetti is checked to see if it is finished.
Water becomes harder due to the presence of calcium, magnesium, and iron(II) ions, which prevents soap solution from creating a lather. Students examine the impact of several dissolved salts, which comprise a variety of cations and anions, on the production of lather in this experiment. After that, they try to determine which ions are impeding lathering.
The students can work in pairs or bigger groups to complete this as a class project.
The first step for the students is to label eight test tubes. Alternatively, they can individually conduct an investigation using three or four more test tubes and distilled water, as long as they include at least one sodium or potassium salt and one calcium or magnesium salt.
Learn more about Water here:
https://brainly.com/question/19920929
#SPJ4
Block A in (Figure 1) has mass 1.00 kg, and block B has mass 3.00 kg. The blocks are forced together, compressing a spring S between them; then the system is released from rest on a level, frictionless surface. The spring, which has negligible mass, is not fastened to either block and drops to the surface after it has expanded. Block B acquires a speed of 1.50 m/s. What is the final speed of block A?
With block B's mass being 3 kg and block A's mass being 1 kilogramme, block A's final speed in Figure 1 is 4.5 kg*m/s. A spring S between the blocks is compressed when they are crushed together.
The system is then released from rest on a smooth surface devoid of friction. Block A in Figure 1 weighs one kilogramme, while Block B has a mass of three kilogrammes. The system is permitted to come to rest on a flat surface without friction once the blocks are brought together, compressing a spring S between them.
Pb2 = 3.0 * 1.50 = 4.5 kg/m/s and Pb1 = 0, P2 = 0, respectively.
As P2 = PA2+Pb2 = 0,
pa2 = -pb2, pa2 = -4.5 kg*m/s,
-4.5 = 1, and va2 = 4.5 kg*m/s, respectively.
Learn more about mass here
https://brainly.com/question/18064917
#SPJ4
A small car meshes with a large truck in a head-on collision. Which of the following statements concerning the momentum during the collision are correct? (There could be more than one correct choice.) a. The momentum of the car is conserved, The momentum of the truck is conserved. b. The momentum of the car-truck system is conserved, but the momentum of each one separately is not conserved. c. The car and the truck must undergo the same change in speed. d. The momentum of the car and the momentum of the truck are each conserved
The small car and the truck experience the same magnitude of momentum change.
The given problem is based on the concept of momentum and law based on it, which is known as Conservation of momentum. As per the law of conservation of momentum, "Whenever there is a collision between the two objects, then the change in momentum before collision is equal to the change in momentum after the collision".
From the conservation of momentum, whatever magnitude of momentum is lost by one of the vehicles will be gained by the other vehicle and momentum will be conserved.
Learn more about Momentum here:
https://brainly.com/question/1042017
#SPJ4
For a given fluid at a given temperature, we plot the shear stress vs the shear strain rate. The slope of the resulting line can be referred to as the ____________ (one word).
Choose matching definition
O viscosity
O solubility
O density
O water
The slope of the resulting line can be referred to as the viscosity.
What is mean by viscosity? Viscosity is a measure of a fluid's resistance to flow. It is a property of a fluid that describes how easily it can be moved or stretched. It is a measure of how thick a liquid is and how easily it can be poured or mixed. Viscosity is measured in units such as centipoise (cP), poise (P), or centistokes (cSt). The higher the viscosity of a fluid, the slower it flows. Viscosity can be affected by temperature, pressure, and other factors. For example, temperature can increase the fluid's viscosity, while pressure can decrease it. Viscosity is an important factor in many engineering and industrial processes, such as oil drilling, automotive lubrication, and paint applications. It affects the performance of engines, pumps, and other machinery. It is also important in the design of vessels and pipelines, and it affects the flow of fluids through them. Knowing the viscosity of fluids is essential for successful operation of these systems.To learn more about viscosity refer to:
https://brainly.com/question/2568610
#SPJ4
a formula one racecar is traveling around a proper racetrack that has banked turns. the banking helps the cars to maintain a faster speed through the turns. choose the best response about why these tracks are designed this way - note that if more than one is correct that later options give you the option to select more than one from a, b and c.
We looked at the fundamental ideas behind circular motion. Another of the race cars displayed at the start of the chapter is an example of an item moving in a circular path that must be accelerating. We established that the centrifugal acceleration, also known as centripetal acceleration
What does the term "centrifugal acceleration" refer to?To start, there is the actual gravitational acceleration, which is constantly pointing in the direction of the Earth's center and is of magnitude. Next, there is the alleged centrifugal acceleration. The direction of this acceleration, which is always directly away from the axis of rotation of the Earth, is normal.
What do centripetal & centrifugal acceleration mean?Centripetal force is really the portion of a force exerted on an item moving curvilinearly and is pointed in the direction of the axis od rotation or the center of curvature. The centrifugal force, that acts along the circle's radius and therefore is directed away of its center, is a fictitious force that moves in a circle.
To know more about centrifugal acceleration visit:
https://brainly.com/question/17065689
#SPJ4
part d: use the constraints of the real-world situation to predict the height of the water balloon at 10 seconds. use complete sentences to support your answer
The height of the water balloon at 10 seconds will be 0 ft.
The information for a linear pair is given in the question like ordered pair
(0,60); (2,80); (3,80); (4,20); (6,0); (7,0); (8,0)
The values (input) on the time-related x-axis make up the domain.
The values entered on the y-axis, which represents the height the balloon attained, make up the range.
Now it is given that the height of the water balloon is continuously decreasing from 3 seconds after being thrown off the roof, reaching a height of 0ft. at 6 seconds, and maintaining that height up until 8 seconds, Newton's law of motion states that at 10 seconds, provided that no additional force is applied to the balloon, its height is 0ft.
The height of 0 feet is obtained at 10 seconds after the balloon is launched by extending the graph further.
Question)- The linear model represents the height, f(x), of a water balloon...
The linear model represents the height, f(x), of a water balloon thrown off the roof of a building over time, x, measured in seconds:
Part A: During what interval(s) of the domain is the water balloon's height increasing? (2 points)
Part B: During what interval(s) of the domain is the water balloon's height staying the same? (2 points)
Part C: During what interval(s) of the domain is the water balloon's height decreasing the fastest? Use complete sentences to support your answer. (3 points)
Part D: Use the constraints of the real-world situation to predict the height of the water balloon at 14 seconds. Use complete sentences to support your answer. (3 points)
Learn more about height
brainly.com/question/20594266
#SPJ4
400 jj of work are done on a system in a process that decreases the system's thermal energy by 300 jj .
In this process, 400 joules of work are done on the system, which means energy is being transferred into the system in the form of work. At the same time, the thermal energy of the system is decreasing by 300 joules. This suggests that the system is also losing energy in the form of heat and it indicates that the work done on the system is used to remove thermal energy from the system, leading to a decrease in the system's temperature. This process is likely an example of a cooling process, such as refrigeration or air conditioning.
Overall, the net change in the system's energy is -300 joules (decrease in thermal energy) + 400 joules (work done on the system) = 100 joules. This means that the system has gained 100 joules of energy overall, but it has gained it in the form of work and lost it in the form of heat.
To learn more about Thermal energy:
https://brainly.com/question/7541718
#SPJ4
when an object moves in uniform circle motion, both the radius of the path and the [ select ] remain constant.
No statement is true if an object moves in uniform circle motion, both the radius of the path and the [ select ] remain speed constant.
The correct answer is true
What do you mean by a motion?In physics, motion changes over time depending on a body's position or orientation. Translation is the action of moving along the line or curve.
Which motion law is the first?According to the First Law of Movement (inertia), unless acted upon by an unbalanced force, an object at rest stays at rest, or an object in motion continues to move
To know more about speed visit:
https://brainly.com/question/28224010
#SPJ4
The correct question is
An object moves with constant speed in a circular path. Which of the following statements is/are true?
1. The velocity is constant
2. The acceleration is constant.
3. The net force on the object is zero, since the speed is constant.
A caterpillar climbs up a one-meter wall. For every 2 cm it climbs up, it slides down 1 cm. It takes 10 minutes for the caterpillar to climb to the top. What is the distance traveled? (Round the number to the nearest hundred.)
The distance travelled by Caterpillar will be 1.5 m as rounded to the nearest hundred.
Distance is a scalar quantity while Displacement is vector. Displacement is the distance and direction separating an object's ultimate position from its initial position. Distance is the overall length an object travels while in motion.
It makes one movement, reaching 2 cm, but then stops at 1 cm.
It makes two moves to reach 3 cm but stops at 2 cm.
This implies, for example, that a caterpillar climbing up 4 cm will also slide down a total of 2 cm, climbing up 10 cm will result in a total slide down of 5 cm, etc.
The caterpillar travels 3 cm in that interval because it descends 1 cm for every 2 cm it climbs up. We specify,
Distance (d) = 3 cm of distance traveled / 2cm of climbing up
Thus, the distance travelled by Caterpillar will be 1.5 m i .
Learn more about Distance and Displacement at
brainly.com/question/25986482
the bug has the greater acceleration because it has the smaller massthe windshield has the greater acceleration because it has the greater massthey both have the same magnitude of acceleration
The bug has a larger acceleration because it has a smaller mass, according to the claim made.
How does acceleration work?acceleration is the rate of change in both speed and the direction of velocity over time. When anything moves faster or slower in a straight line, it is said to have been accelerated.
What does the law of acceleration simply mean?According to Newton's Second Law of Motion, acceleration (gaining speed) occurs whenever a force is acted on a mass (object). Every law of motion is best demonstrated by riding a bicycle. The mass is your bicycle. Your leg muscles are pressing the pedals.
To know more about acceleration visit:
https://brainly.com/question/12550364
#SPJ4
I understand that the question you are looking for is:
Which has the greater acceleration: the bug or the windshield?
A 7.5-kg otter slides down a hill, starting from rest at the top. The sloping surface of the hill is 8.8 m long, and the top is 6.5 m above the base. If the speed of the otter at the bottom of the hill is 9.2 m/s, how much energy was lost to nonconservative forces on the hill?
The energy lost to non conservative forces on the hill is
[tex]4,977.5 J - 34.2 J = 4,943.3 J.[/tex]
What percentage of the hill's energy was lost to non conservative forces?The potential energy at the top of the hill is given by mgh, where m is the mass of the object, g is the acceleration due to gravity and h is the height above the base.
Therefore, the potential energy at the top of the hill is [tex]7.5 kg x 9.8 m/s^2 x 6.5 m = 4,977.5 J[/tex]
The kinetic energy at the bottom of the hill is given by[tex]1/2 mv^2[/tex], where m is the mass of the object and v is the velocity.
Therefore, the kinetic energy at the bottom of the hill is[tex]1/2 x 7.5 kg x 9.2 m/s^2 = 34.2 J[/tex]
The energy lost to non conservative forces is the difference between the initial potential energy and the final kinetic energy.
Therefore, the energy lost to non conservative forces on the hill is [tex]4,977.5 J - 34.2 J = 4,943.3 J.[/tex]
The energy loss is due to the various non conservative forces like friction, air resistance, etc. that the otter has encountered while sliding down the hill.
It's worth noting that the energy lost to non conservative forces is not recoverable and the energy conserved can only be converted between different forms.
To learn more about kinetic energy refer:
bhttps://brainly.com/question/999862
#SPJ4
How to Distinguish Between Seismic, Pulse, and Periodic Waves
Step 1: Determine if the wave travels through the Earth.
Step 2: Determine if the wave is from a sudden disturbance and dies down quickly.
Step 3: Determine if the wave continues for several cycles (not from a sudden disturbance).
Step 4: Analyze the results, remembering that waves can be more than one type of wave.
If the wave travels through the Earth, it is a seismic wave.
If the wave is from a sudden disturbance and dies down quickly, it is a pulse wave.
If the wave continues for several cycles, it is a periodic wave.
Seismic waves are characterized by long wavelength and low frequency, pulse waves by short wavelength and high frequency, and periodic waves by regular wavelength and frequency.
What are the different characteristics of Seismic, pulse, and periodic waves?Seismic waves are created by movement of the Earth's crust and are caused by earthquakes, volcanic eruptions and other geological events. They are characterized by their long wavelength and low frequency.
Pulse waves are created by a single, localized event, such as a rock slide or a meteor impact. They have a single crest and trough and are characterized by their short wavelength and high frequency.
Periodic waves are created by repeating source, such as vibrating tuning fork or guitar string. They are characterized by regular wavelength and frequency.
To know more about waves, refer
https://brainly.com/question/1968356
#SPJ4
jacob, thinking aloud, says several things about electric fields and field lines. which of his statements is true?
Electric field is a vector and it is the force experienced by unit positive charge free move acceleration electric field. 2) Because the electrostatic attraction is quantized, it found in specific regions of space.
The correct answer is B
Are particle pathways found in electric field lines?The route of a particle in an electric field is not along the field lines. It indicates the force, and consequently the acceleration, at each place. A particle's direction of motion is determined by its velocity. Acceleration and velocity don't always point in the exact same direction.
Electric field is a vector and it is the force experienced by unit positive charge free to move inside an electric field.
The direction of electric field is away from positive charge and towords for negative charge.
The direction of electric field is in the directioon of unit positive charge free to move.
What do the lines in an electric field stand for?Result for an image The pathways of particles are represented by electric field lines. Electric field lines provide details on the strength and direction of an electromagnetic current in a given area of space. If the lines coincidentally cross at.
(1) Therefore electric field lines represents path of charged particle Therefore the given ststement is false.
(2) Electric field lines are conninous in space
Therefore the given ststement is false.
(3) The electric flux is the number of electric lines of force crossing
per unit area, that is density of field lines.
Thus the magnitude of electric field proportional to density of field lines Therefore the given statement is True.
(4) Electric field lines are imaginary curves around a unit positive charge and not real and not for the material objects.
Therefore the given statement is False.
Therefore out of above only true statement is (3).
To know more about acceleration visit:
https://brainly.com/question/12550364
#SPJ4
The correct question is
Several Things About Electric Fields And Field Lines. Which Of His Statements Is True? And Why several things about electric fields and field lines. Which of his statements is true? and why
1) Electric field lines represent the paths of particles.
2) The electric field is quantized and exists only in certain parts of space
3) The relative magnitude of the electric field is proportional to the density of the field lines
4) Electric field lines are material objects.
Please use the interactive area below to recreate the Free Body Diagram from the video. The video shows the case where a man is pulling the crate and where friction is involved. You can pause the video around 1 min and 35 seconds in to see the correct FBD.
An object of interest is sketched in a free-body diagram, with all of its surroundings removed and all of the forces operating on the body clearly visible.
In order to visualize all the forces acting on a single item, a free-body diagram must be drawn. This is a crucial stage in the solution of mechanics issues. The simplified representations of an item (the body) and the force vectors acting on it in a problem are called free body diagrams, or FBDs. This body is unencumbered by its surrounds because the diagram will portray it that way; it is thus said to be "free." Using free-body diagrams, you may compute reactions in mechanics issues and depict the forces and moments acting on a body.
Learn more about free-body diagram here:-
brainly.com/question/30306775
#SPJ4
The complete question is:
Please use the interactive area below to recreate the Free Body Diagram (See. Pic 3) from the video. The video shows the case where a man is pulling the crate and where friction is involved. You can pause the video around 1 min and 35 seconds in to see the correct FBD.
An incandescent bulb is only 10% efficient at converting the electricity to light. Which of the following best supports the idea that incandescent bulbs lose 90% of the energy to heat?
a. Enthalpy
b. 10% Eule
c. First Law of Thermodynamics
d. Second Law of Thermodynamics
d. Second Law of Thermodynamics
According to the Second Law of Thermodynamics, the entropy of the entire cosmos as a stand-alone system will always rise over time.
The second law also states that there can never be a decrease in entropy in the universe.
Néstor Leonard Sadi Carnot, a French scientist, is known as the "father of thermodynamics" since he is credited with developing the Second Law of Thermodynamics and many other key ideas. As opposed to caloric, which Sadi Carnot used to define the concept, the second law as it exists now employs entropy. When Sadi Carnot realized that some caloric is always lost in the motion cycle, he realized that caloric is related to heat. As a result, the idea of thermodynamic reversibility was disproved, demonstrating that every system involving work will eventually become irreversible.The Clausius statement, which states that "Heat normally cannot flow spontaneously from a material at a lower temperature to a material at a higher temperature," was created by German physicist Rudolf Clausius.The Kelvin statement, which claims that "it is difficult to convert heat totally in a cyclic process," was created by William Thompson, popularly known as Lord Kelvin. This indicates that there is no way to use up all of a system's energy without also using it up.A Greek mathematician named Constantin Carathéodory came up with his own definition of the second low, claiming that "States which cannot be arbitrarily approached close through adiabatic changes of state" exist close to any initial state.To learn more about the Second Law of Thermodynamics
https://brainly.com/question/24250403
#SPJ4
A 70kg bicyclist (including the bicycle), initially at rest pedals up a hill. She reaches a speed of 2m/s despite experiencing a 15N drag during her ride. The distance and height of the hill are shown. Neglect any friction impeding her motion and the rotational energy of the wheels. List the energy types at the initial and final time and whether work and loss (due to non- conservative forces) occur as well as the corresponding amounts of energy. 70m 13m initial: none 0 J work?
The energies of several types of bicyclist are Kinetic energy and Potential energy. Work done and energy loss by bicyclist is 1050.
Give a brief account on energy?Energy is the ability to do work. But we're not talking about going to work or doing your chores, we're talking about work as defined in the physical sciences. Work is the application of a force to move an object in the direction of the force. Like, when you pedal a bicycle, or when an electric motor lifts an elevator. Energy is conserved.
At the initial time, the bicyclist is at rest and has no kinetic energy (KE) and no potential energy (PE) since she is not moving and is not at a height.
Work is done on the bicyclist by the force applied by her muscles to pedal the bicycle. The work done is equal to the force applied multiplied by the distance over which the force is applied:
Work = force x distance = 15N x 70m = 1050 J
Energy is also lost due to the drag force acting on the bicyclist. This energy loss is equal to the work done by the drag force:
Energy loss = force x distance = 15N x 70m = 1050 J
At the final time, the bicyclist has kinetic energy as she is moving with a velocity of 2m/s. The kinetic energy is equal to 1/2mv²:
KE = 1/2(mv²) = 1/2(70)(2)² =280J
The bicyclist also has potential energy due to her height above the ground. The potential energy is equal to mgh:
PE = mgh = (70kg)(9.8)(13m) = 9,140 J
So, at the initial time, the bicyclist has no kinetic energy and no potential energy.
To know more about potential energy visit:
https://brainly.com/question/24284560
#SPJ4
A uniform brick of length 25 m is placed over the edge of a horizontal surface with a maximum overhang of 12.5 m attained without tipping.
Now two identical uniform bricks of length 25 m are stacked over the edge of a horizontal surface.
What maximum overhang is possible for the two bricks (without tipping)?
Answer in units of m.
The maximum overhang possible for the two bricks is 18.75 m.
What is the center mass of the two bricks?The center of first rod will lie exactly at the edge of first rod, and when two rods are combined, the center of mass will be at the edge of the table.
As a result of this the whole system will rest on the rod and it will not tipping off.
Since both rods are identical, it will be safe to say that the system will have its center of mass at the mid point on the line joining the two centers
The center mass of at the mid point on the line joining the two centers is calculated as;
d = 0.5 x 12.5 m
d = 6.25 m
The maximum overhang possible for the two bricks is calculated as;
L = 6.25 m + 12.5 m
L = 18.75 m
Learn more about maximum overhang here: https://brainly.com/question/30382090
#SPJ1
which of the following is not permitted as a means for identifying an equipment grounding conductor?
A Gray Insulation is never allowed as a means for identifying an equipment grounding conductor.
Which colors is not permitted to be used to identify a grounded conductor?Only in circuits with 50V or higher can a conductor with white insulation be used for the ungrounded conductor.
Cable Assembly: If the white conductor in a cable is permanently re-identified as the ungrounded conductor at each site where it is visible by labeling tape, painting, or other effective ways, it can be utilized for that purpose. Insulation must be identified, and identification must be around it in a color other than white, gray, or green.
If the white conductor is permanently re-identified at each site where it is visible to indicate its usage as an ungrounded conductor, it can be used to power single-pole, 3-way, and 4-way switch loops as well as passengers for 3-way and 4-way switching.
To learn more about gray insulation, refer:
https://brainly.com/question/24909989
#SPJ4
this week, consider the following terms: displacement velocity time distance speed vector acceleration
Speed and distance are both scalar values, which means they only have a magnitude (or numerical value).
Displacement, velocity, and acceleration, on the other hand, are vector quantities, which means they have both a magnitude and a direction.
The shortest distance between the starting point and the ending location can be used to determine displacement. A vector quantity with both magnitude and direction is displacement.
The length of the actual path a body takes during a time period can be used to determine distance. A scaler quantity with simple magnitude is distance.
The distance a body travels in a unit of time is referred to as speed. It is a smaller amount.
A body's displacement in a unit of time is one way to define velocity. A vector quantity, that is.
The rate at which an object's velocity changes over time is known as acceleration.
Know more about velocity
https://brainly.com/question/25749514
#SPJ4
A force can change an object's___energy by changing its motion or its position. Question options: a. electromagnetic b. mechanical c. potential d. kinetic
Answer:
(d) Kinetic Energy
Explanation:
Applying a force requires us to do work. After work has been done on the body, energy used by us to do work is transferred to the object, and the object will be moving with a new constant speed. The energy transferred is known as kinetic energy, and it depends on the mass and speed achieved.
measure: place the planet at -4.00i au and set the velocity to -15.00j km/s (does not have to be exact). click play, and then click pause when the planet completes one orbit.
According to Kepler's final law, a planet's period (T), or the amount of time needed to complete an orbit, is inversely proportional to its orbital radius (a), or average distance from the Sun.
The planets' distance also has an impact on the cycle since the more away they are, the slower they move, interrupting the cycle. The number will be less the closer it is to the sun. Both the planet's present velocity (speed and direction) and its gravitational pull on the Sun define each planet's route around the Sun. As you explore planetary orbits in the Orbital Motion, you can adjust both of these variables. Here, the astronomical unit (AU), which is equivalent to the average Earth-Sun distance.
To learn more about distance click here https://brainly.com/question/29678788
#SPJ4
A particle moving along the x-axis in simple harmonic motion starts from its equilibrium position, the origin, at t = 0 and moves to the right. The amplitude of its motion is 3.50 cm, and the frequency is 1.70 Hz.a. Find an expression for the position of the particle as a function of time.b. Determine the maximum speed of the particle.c. Determine the earliest time at which the particle has this speed.d. Find the maximum positive acceleration of the particle.e. Find the earliest time at which the particle has this acceleration.f. Determine the total distance traveled between t = 0 and t = 0.88 s.
A particle moving along the x axis in simple harmonic motion starts from its equilibrium position, the origin, at t = 0 and moves to the right.
What is motion definition and example?We can define motion as the change of position of an object with respect to time. A book falling off a table, water flowing from the tap, rattling windows, etc., all exhibit motion. Even the air that we breathe exhibits motion.
What is called motion in physics?Motion in physics, is a change of position or orientation of a body with the change of time. Motion along a line or a curve is named translation. Also, the motion that changes the orientation of a body is rotation.
To know more about motion visit
https://brainly.com/question/22810476
#SPJ4
identifying wave interactions which picture best demonstrates the phenomenon of diffraction? compact discs a triangular prism with a rainbow coming from it. light coming through tinted glass panels.
Identifying wave interactions, the picture which best demonstrates the phenomenon of diffraction is the one with the compact discs.
In any wave interactions, there are two types of interference that can occur in any kind of waves: constructive interference and destructive interference.
When two waves with the same phase interfere constructively, the outcome is a wave that is twice as amplitude as the original wave since each crest and trough of each wave match those of the other.
The destructive interference occurs when two waves that are out of phase have their crests cancel each other out.
As a result of constructive interference and destructive interference at various spots on the screen, light that travels through a slit will result in a diffraction pattern in which each brilliant pattern corresponds to a crest and a dark pattern to a trough.
The wavefront and how the overlaps produce constructive and destructive interference to produce the diffraction pattern may be represented by the circular shape of the discs.
Learn more about wave interactions here:
https://brainly.com/question/29767263
#SPJ4
Answer:
picture with the discs
EDGE 2023
The table below describes some methods used to generate electricity. What is method 1?
Answer:
More importantly where is the table?¿
