vanillin can be recrystallized from water because it is slightly soluble in warm water. which functional group of vanillin is mostly responsible for the slight water solubility? why is vanillin not completely soluble in water?

Answer:

the pH of the solution is 5.5.

Explanation:

the concentration is 5 moles per liter and the acidity or alkalinity is 0.5 moles per liter.

Dibenzylideneacetone is formed when benzaldehyde reacts with acetone and sodium hydroxide. An aldol condensation process is seen here. The aldol condensation reaction.

is a process that occurs in the presence of a base (sodium hydroxide) between an aldehyde or ketone to generate a beta-hydroxy aldehyde or ketone, which may then be dehydrated to form an alpha,beta-unsaturated aldehyde or ketone. In this scenario, Dibenzylideneacetone is formed when benzaldehyde reacts with acetone and sodium hydroxide. An aldol condensation process is seen here. The aldol condensation reaction. the beta-hydroxy ketone produced (dibenzylideneacetone) is dehydrated to produce the alpha,beta-unsaturated ketone (stilbene is not formed in this reaction).

learn more about hydroxide   here:

https://brainly.com/question/4251554

#SPJ4

In an atom, number of electrons and protons is same and thus number of electrons and protons are 79 in an ion of gold(III).

An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.

Learn more about atom,here:

https://brainly.com/question/13654549

#SPJ1

No, the properties of two proteins with the same type and number of amino acids but a different order of linkage are not the same.

Proteins are complex biomolecules with unique physical and chemical properties that are determined by their three-dimensional structure, which in turn depends on the specific order and arrangement of amino acids in the protein chain.

The order of amino acids in a protein is known as its primary structure, and it can greatly affect the protein's properties, such as its shape, stability, solubility, and function. Therefore, two proteins with different primary structures, even if they contain the same amino acids, will have different properties, and may interact differently with other molecules and cells in the body.

In conclusion, the primary structure of a protein plays a critical role in determining its properties, and any changes or variations in the order of amino acids can have significant consequences for the protein's structure and function. Therefore, two proteins with the same type and number of amino acids but different primary structures are not the same and can have different properties and functions.

Learn more about proteins

brainly.com/question/29776206

#SPJ4

1. Chemical substances in food dissolve in saliva. 2. Taste receptors are stimulated. 3. Signals are sent to the thalamus. 4. The frontal lobe perceives taste.

Substances can be defined as materials or substances that are composed of one type of atom or molecule. They are made up of atoms and molecules that are combined together in a specific way and can be observed in the physical world. Substances can be either natural or man-made and can be either solid, liquid, or gas. They have a unique set of properties such as boiling point, melting point, and density, which helps to describe them.

To learn more about substances

https://brainly.com/question/934320

#SPJ1

It should be b

oil was formed from sea animals and bacteria or plants like algae. hope this helps!

Answer:

You might want to know the amount of carbon dioxide produced by your dream car for a variety of reasons. For example:

Environmental impact: Knowing the carbon dioxide emissions of a car can give you an idea of its impact on the environment. High carbon dioxide emissions contribute to climate change, air pollution, and other environmental issues.

Fuel efficiency: A car that produces high levels of carbon dioxide is likely to be less fuel efficient. This means that it may consume more fuel than other vehicles, making it more expensive to operate over time.

Government regulations: Many countries have regulations that limit the amount of carbon dioxide that cars can emit. Knowing the emissions of your dream car can help you determine whether it is compliant with these regulations.

Personal responsibility: If you are concerned about the impact of your actions on the environment, knowing the carbon dioxide emissions of your dream car can help you make informed decisions about the car you purchase and how you use it.

Explanation:

Overall, knowing the carbon dioxide emissions of your dream car can help you make informed decisions about your driving habits and the car you purchase.


ALLEN

Covellite is a mineral that is composed mainly of sulfur(S) and copper (Cu), with occasional traces o other elements such as Iron (Fe), Nickel (Ni), and arsenic (Ar). Covellite has a chemical formula of CuS.

It is a member of the sulfide mineral group and is commonly found in the alteration process of other similar minerals that are made of CuS. Examples of such similar minerals are Chalcolite and Chalcopyrite.

The given element, Covellite has a distinct blue-black color for which it is known for. It is one of the rare minerals which is often sought out and after by mineral collectors all around the world.

Learn more about covellite at:

brainly.com/question/16951411

If the half-life of radium-226 is 1620 years. Then the percentage of a given amount of the radium that will remain after 1200 years is about 42.86%.

To solve this problem, we can use the formula for exponential decay:

N(t) = N0 * (1/2)²(t/T)

where:

N(t) is the amount of radium-226 remaining after time t

N0 is the initial amount of radium-226

T is the half-life of radium-226

We want to find the percentage of the radium that will remain after 1200 years, so we need to calculate N(1200)/N0 and express the result as a percentage.

Using the formula above and plugging in the given values, we get:

N(1200) = N0 * (1/2)²(1200/1620)

N(1200)/N0 = (1/2)²(1200/1620)

N(1200)/N0 ≈ 0.4286

So, after 1200 years, approximately 42.86% of the radium-226 will remain.

Therefore, after 1200 years, about 42.86% of the given amount of radium will remain.

Learn more about radium here:

https://brainly.com/question/9216557

#SPJ4

Answer:

B) Fuel burns and heats the surroundings

D) A car's air bag expands by igniting a chemical.

Explanation:

These two phenomena are caused by chemical reactions that release energy. In the case of B, fuel burning releases energy in the form of heat and light. In the case of D, the ignition of a chemical in a car's air bag rapidly releases a large amount of energy, causing the air bag to rapidly inflate and protect the occupants of the car during an accident.


ALLEN

Answer:

D) A car's air bag expands by igniting a chemical.

Explanation:

Fireworks are a type of pyrotechnic display that are created by chemical reactions that release energy in the form of light, heat, and sound. These chemical reactions are usually accomplished through the use of oxidizers, fuel, and various chemicals that are carefully combined to produce the desired effects.

A) Muscles work to perform a task is not caused by a chemical reaction that releases energy. Instead, it is caused by the contraction of muscle fibers, which generate force to move the body or an object.

B) Fuel burns and heats the surroundings is caused by a chemical reaction that releases energy. When fuel, such as gasoline or wood, is burned, it reacts with oxygen in the air to release heat and light.

C) A battery supplies current to a device is not caused by a chemical reaction that releases energy. Instead, it is caused by the flow of electrons through a conductive material, such as a wire.

D) A car's air bag expands by igniting a chemical is caused by a chemical reaction that releases energy. The air bag is typically activated by a chemical reaction between two substances that generates a large amount of gas, which rapidly inflates the air bag to protect the occupants of the vehicle.

Explanation:

True. They may both be properties of a gas but they are independent of each other since the pressure of a gas may vary without changing the temperature or volume (or any other properties).

Answer:

True

Explanation:

The statement "The qualities/quantities of a gas are independent of one another" is True. This means that a change in one property of a gas, such as pressure, volume, or temperature, does not affect the other properties. This is one of the basic assumptions of the ideal gas law, which states that the pressure, volume, and temperature of a gas are proportional to one another under certain conditions.

For example, when the volume of a gas is increased, its pressure decreases, and when its temperature is increased, its pressure also increases. These changes in properties are independent of one another, and can be described by the mathematical relationships described by the ideal gas law.

ALLEN

0.005 g of Cr are present in 1000 g of water.

What does "parts per million" mean?

This stands for "parts per million" and can also be written as mg/L (milligrams per liter). The mass of a chemical or contamination per volume of water is the unit of measurement here.

PPM, or parts per million, is a word used to describe a solution's concentration. In 1000 ml or 1 L of solution, 1 milligram of the solute equates to 1 ppm.

It is assumed that water contains 5 parts per million (ppm), or 5 mg of Cr per liter. 1000 ml or 1000 g is equal to one liter of water. Therefore, 5 mg or 0.005 g of Cr are present in 1000 g of water.

To learn more about contamination use link below:

https://brainly.com/question/13754321

#SPJ1

The phase change where energy is released into the surrounding is called exothermic change. Here the heat energy is released to undergo a phase change.

Phase change is the change in the states, that is transitioning from one state to another. Here matter changes phases from liquid, solid, air to any other state. The reaction is exothermic during the changes like a gaseous phase changes into liquid phase or a liquid phase to solid phase.

An example for exothermic change is condensation and freezing. During condensation the latent heat of vaporization is released to the surroundings to undergo change from gaseous to liquid state. During freezing the latent heat of fusion is released to the environment to change phase from liquid to solid.

So during exothermic change a substance release energy to its surroundings.

For more information about exothermic changes, kindly refer

https://brainly.com/question/29555731

#SPJ4

The molar mass of hydrogen (H2) is 2.016 g/mol. Therefore, the mass of 9 moles of hydrogen is: 9 mol x 2.016 g/mol = 18.144 g. So, 18.144 grams of hydrogen must react with 3 moles of nitrogen completely.

Ammonia is useful in many ways, including fertilizer production, household cleaning product, refrigeration, water treatment, textile production and fuel production.

Ammonia is a key component of fertilizer because it contains nitrogen, an essential nutrient for plant growth. Plants require nitrogen to build proteins and other essential molecules. While nitrogen is abundant in the atmosphere, plants cannot use it in its gaseous form. Instead, nitrogen must be converted into a usable form, such as ammonia, through a process called nitrogen fixation.

The balanced chemical equation for the reaction between nitrogen and hydrogen to form ammonia is N2 + 3H2 → 2NH3.

To react completely with 3 moles of nitrogen,

3 moles N2 x 3 moles H2 / 1 mole N2 = 9 moles H2

The molar mass of hydrogen (H2) is 2.016 g/mol. Therefore, the mass of 9 moles of hydrogen is: 9 mol x 2.016 g/mol = 18.144 g

So, 18.144 grams of hydrogen must react with 3 moles of nitrogen completely.

To learn more about moles, visit here:

https://brainly.com/question/14357742

#SPJ1

The coefficient for sodium in the balanced equation would be 1.

When balancing a chemical equation, you want to make sure that the number of atoms of each element is the same on both sides of the equation. To do this, you can follow these steps:

          Na + Cl2 -> NaCl

     On the left side, there is 1 Na and 2 Cl.

      On the right side, there is 1 Na and 1 Cl.

        Na + Cl2 -> 2 NaCl

Thus, the coefficient of sodium is 1.

More on balancing chemical equations can be found here: https://brainly.com/question/28294176

#SPJ1

Smaller gas molecule sizes do not contribute to greater gas ideality. On the other hand, larger system volumes and smaller system pressures both contribute to greater gas ideality

The ideal gas law assumes that gas molecules are point masses with no volume and that there are no attractive or repulsive forces between the molecules. In reality, gas molecules do have volume, and there are intermolecular forces that can affect the behavior of the gas. However, if the gas molecules are small compared to the volume of the container they are in, their volume becomes relatively insignificant and can be ignored. Therefore, smaller gas molecule sizes do not contribute to greater gas ideality, as their small size makes them approach the ideal gas behavior more closely. Smaller gas molecule sizes do not contribute to greater gas ideality.

learn more about ideal gas law here:

https://brainly.com/question/28257995

#SPJ4

Answer:

0.4535 mols

Explanation:

CaO Molar Mass is 56.1 grams.

25.44gCaO x 1mol/56.1g = 0.4535 mols

The grams of water are needed to dissolve 25.31 g of the potassium nitrate  in order to prepare the 0.1982 M solution is 1263 g.

The expression of the molality is as follows :

Molality = moles solute / kg solvent  

The kg of solvent = moles solute / molality  

The moles of solute = mass / molar mass  

The moles of solute = 25.31 g / 101.1 g/mole  

The moles of solute = 0.2503 mole

The amount in kg solvent = 0.2503 mole / 0.1982 m  

The amount in kg solvent = 1.263 kg  

The amount in kg solvent = 1263 g

To learn more molality here

https://brainly.com/question/11003135

#SPJ4

The characteristics of the individual molecules and their molecular geometry determine the types of intermolecular forces that a compound displays.

Intermolecular forces typically fall into one of three categories:

All molecules exhibit London dispersion forces, the weakest kind of intermolecular force. They develop as a result of brief variations in electron density that lead to the creation of instantaneous dipoles. As molecular size and surface area grow, London dispersion forces rise.

Interactions between molecules possessing permanent dipoles, such as polar covalent compounds, are known as dipole-dipole interactions. There is a net attractive force created when the positive ends of two dipoles are drawn together. London dispersion forces are outweighed by interactions between dipoles.

When hydrogen atoms are joined to strongly electronegative atoms like nitrogen, oxygen, or fluorine, an unique sort of dipole-dipole interaction called hydrogen bonding takes place. Due to the significant difference in electronegativity between hydrogen and several other atoms, hydrogen bonds are a sort of intermolecular force that are exceptionally powerful.

For such more question on intermolecular

https://brainly.com/question/13588164

#SPJ4

The process of joining two or more monomers to form a polymer is known as polymerization. In most cases, polymerization occurs through a chemical reaction called dehydration synthesis or condensation reaction.

This reaction occurs when a hydroxyl (-OH) group from one monomer and a hydrogen atom from another monomer are removed, producing a molecule of water as a byproduct. The remaining atoms then form a covalent bond between the monomers, resulting in the formation of a polymer. This process is commonly used in the synthesis of polymers such as proteins, nucleic acids, carbohydrates, and synthetic materials. The ability to polymerize different monomers allows for a wide range of properties to be obtained in the resulting polymers, which can be tailored for various applications.

Find more about Monomers

brainly.com/question/30703823

#SPJ4

Force applied by the thrusters forced the pod to reverse course, this is determined by direction and strength of the force applied.

Thrust is a response force that can be quantified using Newton's third law. When a system expels and accelerates mass inside one direction, the accelerating mass causes the system to experience a force of same magnitude but opposite direction.

We were told because firing the thrusters slowed but did not halt the pod. If the pod collided with the space station, it would bounce and go in the other direction.

The most likely scenario as well as reason that this has occur is that the force applied by the thrusters forced the pod to reverse course. However, this is primarily determined by two factors: the direction and strength of something like the force applied.

Therefore, force applied by the thrusters forced the pod to reverse course, this is determined by direction and strength of the force applied.

To know more about thrust, here:

https://brainly.com/question/26712174

#SPJ9

The correct answer is 3.68 x 10^23 c atoms.To determine the number of atoms of carbon in 47.6 g of Al2(CO3)3, we first need to calculate the number of moles of Al2(CO3)3 using the formula:

moles = mass / molar mass

moles = 47.6 g / 233.99 g/mol

moles = 0.203 moles

Next, we can use the chemical formula of Al2(CO3)3 to determine the number of moles of carbon present in the compound.

One molecule of Al2(CO3)3 contains three molecules of CO3, each of which contains one atom of carbon. Therefore, the total number of atoms of carbon in one molecule of Al2(CO3)3 is:

3 x 1 = 3 atoms of carbon

So, the number of atoms of carbon in 0.203 moles of Al2(CO3)3 is:

0.203 moles x 3 atoms/molecule x Avogadro's number (6.022 x 10^23 atoms/mol)= 3.68 x 10^23 atoms of carbon

Therefore, the correct answer is 3.68 x 10^23 c atoms.

Find out more about atoms of carbon

brainly.com/question/4572802

#SPJ4

The limiting reagent would be either Hydrochloric acid (HCl) or Zinc (Zn), depending on the amounts of each present in the reaction.

The chemical reaction commonly used to determine the molar volume of hydrogen gas is:

2 HCl(aq) + Zn(s) → ZnCl2(aq) + H2(g)

In this reaction, the limiting reagent is the reactant that is completely consumed, limiting the amount of product that can be formed.

In this case, the limiting reagent would be either HCl or Zn, depending on the amounts of each present in the reaction. Typically, the reactant that is present in the smallest amount is the limiting reagent.

To learn more about limiting reagent:

https://brainly.com/question/26905271

#SPJ4

Answer:

Covalent bonds are formed by the sharing of electrons between two non-metallic atoms. These bonds are typically stronger and more stable than ionic bonds and are found in compounds such as water, hydrogen, and carbon dioxide. Covalent bonds differ from ionic bonds in that they do not involve the transfer of electrons from one atom to another.

Explanation:

At pH 9.0, the solution is basic and the ionizable groups in the peptide will be ionized. The correct answer is option b: n-terminus: amine; lysine r group: ammonium; c-terminus: carboxylate; aspartic acid r group: carboxylate.

At pH 9.0, the ionizable groups in a peptide are likely to be ionized. The pKa values of the different ionizable groups in the peptide determine which form they will be in at a given pH. The amino group at the N-terminus of the peptide has a pKa value of about 9.0, which means that it will mostly exist in the ionized form as an amine (NH2) at pH 9.0. The lysine R group has a pKa value of approximately 10.8, which means that it will exist in the ionized form as ammonium (NH3+) at pH 9.0. The carboxyl group at the C-terminus of the peptide has a pKa value of around 2.2, which means that it will exist in the ionized form as a carboxylate (COO-) at pH 9.0. The aspartic acid R group has a pKa value of about 3.9, which means that it will also exist in the ionized form as a carboxylate (COO-) at pH 9.0. Therefore, at pH 9.0, the major forms of each ionizable group in a peptide are N-terminus - amine (NH2), Lysine R group - ammonium (NH3+), C-terminus - carboxylate (COO-), and Aspartic acid R group - carboxylate (COO-). Understanding the ionization of peptides at different pH values is important in many biochemical and biophysical studies that involve peptides and proteins.

To know more about the ionizable group of amino acids, visit:https://brainly.com/question/30436166

#SPJ4

You are using an experimental spectrophotometer. If a detector reading is 45158 (in some unit) for a blank tube and 4119 for your riboflavin sample. Then, the absorbance of the riboflavin sample is 1.30.

Riboflavin, also known as vitamin B2, is a vitamin found in foods and sold as a dietary supplement. Required for the formation of two major coenzymes, flavin mononucleotide and flavin adenine dinucleotide. These coenzymes are involved in energy metabolism, cellular respiration and antibody production, and normal growth and development. Coenzymes are also required for the metabolism of niacin, vitamin B6, and folic acid. Riboflavin is prescribed to treat corneal thinning, and oral administration can reduce the frequency of migraines in adults.

Learn more about riboflavin sample:

https://brainly.com/question/17517602

#SPJ4

Answer:

The absorbance of the riboflavin sample is 0.898 AU, which is calculated by subtracting the blank tube reading (45158) from the riboflavin sample reading (4119) and dividing by 45158.

Answer:

C: The solution has become saturated.

Explanation:

The sugar is not dissolving in the tea because the solution has become saturated. Saturation occurs when the concentration of solute (sugar) in a solvent (tea) has reached its maximum limit, beyond which no more solute can dissolve. At this point, the undissolved solute will settle at the bottom of the container. In this case, the tea is unable to dissolve any more sugar, so it stays at the bottom of the glass.

Answer:

C

Explanation:

Answer:

16.3.

Explanation:

The average atomic mass of an element is calculated by weighing each isotope present and multiplying it by its percent abundance, and then adding all the values.

First, we'll find the weighted average of the isotopes present in 60% and 30% of the Carbon 13 atom:

0.6 * 12.4 + 0.3 * 13.1 = 7.44 + 3.93 = 11.37

Next, we'll subtract the weighted average of these two isotopes from the relative atomic mass of carbon:

13.0 - 11.37 = 1.63

This is the weighted average of the isotope present in the remaining 10% of the Carbon 13 atom. To find the mass number, we'll divide the weighted average by the atomic weight of the isotope:

1.63 / 0.1 = 16.3

So, the mass number of the carbon isotope present in 10% of the Carbon 13 atom is approximately 16.3.