compare and contrast livelock and deadlock. what statement is correct? group of answer choices livelock is a synonym of deadlock. livelock is a deadlock-resolving technique. in the case of deadlock, the resources are held. in the case of livelock, the resources are still free. in the case of livelock, the resources are held. in the case of deadlock, the resources are still free.

A flowchart for a smart home system that can tell the temperature of a room and also the amount of sound in the room cannot be given on short notice, but a pseudocode can be provided for this.

Start

Check if the temperature sensor is working.

If temperature sensor is working, read temperature.

If temperature is above a set threshold, turn on air conditioner. If below a set threshold, turn on heater. If within the range, do nothing.

Check if the sound sensor is working.

If sound sensor is working, read sound level.

If sound level is above a set threshold, turn on noise-cancellation system or alert the user.

If both temperature and sound sensors are working, display the readings on the user interface.

End.

Read more about flowcharts here:

https://brainly.com/question/6532130

#SPJ1

Only non-drive axles, according to Tech B, employ a semi-independent rear suspension. B's technician is precise.

The ability for the inside wheels of a turn to move in a different circle radius than the outside wheels due to the geometric arrangement of steering linkages. The two main drawbacks of a coil spring suspension are cost and load-bearing. Cost is less of an issue if the car already has coil springs, but retrofits can be highly expensive and time-consuming. Independent suspension frequently offers better ride quality and handling qualities because of the lower unsprung weight and the ability of each tire to address the road independently of the other wheel on the vehicle. According to Technician B, a car with an independent front suspension will only have one wheel affected by a bump. In terms of independent suspension, this is also accurate.

Learn more about Suspension here:

https://brainly.com/question/28875606

#SPJ4

If you hand a technician a crossover cable to make a connection between devices then You are most likely asking him to connect switch to switch device pair.

Technicians are knowledgeable professionals who work in almost every industry. Different systems and pieces of equipment are serviced, repaired, installed, and replaced. Technicians should be able to read instructions and communicate clearly as they frequently collaborate with other skilled workers.

The duties of the technician include maintaining and servicing systems, diagnosing issues and troubleshooting equipment, conducting tests and compiling reports, updating and enhancing current systems, and repairing or replacing defective equipment. Wherever possible, you should work with other experts and be able to provide insightful recommendations.

You must exhibit strong self-discipline and a love of technology in order to succeed as a technician. Outstanding technicians have excellent active listening skills and sound knowledge of their field.

Learn more about Technicians

https://brainly.com/question/14290207

#SPJ4

CPU time (or procedure time) is the quantity of time for which a central processing unit (CPU) was used for processing guidelines of a pc application or operating system, as antagonistic to elapsed time, which includes for example, ready for input/output (I/O) operations or entering low-power (idle) mode.

Image result for how a whole lot has the cpu time been reduced?

User CPU time is the amount of time the processor spends in walking your software code. System CPU Time is the quantity of time the processor spends in strolling the operating system(i.e., kernel) functions related to your application.

CPU execution time = = CPU clock cycles x Clock cycle.

= Instruction matter x CPI x Clock cycle. T =

I. x CPI x C.

Learn more about  cpu here;

https://brainly.com/question/474553

#SPJ4

Answer:

True

Explanation:

True.

An exception can be a runtime error caused by an illegal operation that is not possible, such as trying to open a file that does not exist.

The correct answer is a. The search engine could show an advertisement next to the search results for "Terra Mystica", a strategy board game.

This is because search engines and apps can collect information about a user's location and use it to show personalized advertisements. For example, if a user searches for a specific product or service, the search engine may show an advertisement for a local business that offers that product or service. Similarly, apps on a user's devices may also collect location information and use it to show personalized advertisements. It is important for users to be aware of this and to take steps to protect their privacy if they do not want their location information to be collected and used in this way.

Learn more about  search engines here:https://brainly.com/question/512733

#SPJ11

True.To print a worksheet, you begin by going to Backstage view.

What is Backstage?
Backstage is a term used to refer to areas backstage in a theatre, concert, or other performing arts venue. It is the area behind the stage and out of view of the audience. It typically includes dressing rooms, green rooms, storage areas, and other similar spaces. Backstage areas are used for storing props and costumes, preparing for performances, and keeping the stage free from clutter. It also includes areas specifically for the performers, such as dressing rooms and makeup rooms. Backstage is usually off-limits to audience members and is a private area for performers.

To know more about Worksheet
https://brainly.com/question/29980969
#SPJ4

Each bit in N's binary representation is retrieved one at a time using bit-wise right shift and bit-wise left shift operations, and they are then added together to produce the final result.

In mathematics, a binary number is a number that is expressed using the base-2 numeral system, also known as the binary numeral system, which normally only uses the symbols "0" (zero) and "1." (one).  #include<stdio.h> void main(int) int outcome; int x; cin>>x; if (x > 0) outcome = x%2 x = x/2 cout<<result} Output: X = 6, Reaction: 011. And other array methods like append have been used. The new element is added at the end of the arrays using the append method. And the int(b) converts the data type of b from string to integer. The method follows the one outlined in the question. In addition, the array library has been utilized.

Learn more about Binary numeral system here:

https://brainly.com/question/29314732

#SPJ4

An individual cell's contents can be changed right there. With the formula bar, you can also change a cell's contents. Excel is running in Edit mode whenever you modify a cell's content.

While Excel is in Edit mode, some features behave differently or are inaccessible. The word Edit can be seen in the Excel application window's lower-left corner while the spreadsheet is in edit mode, as illustrated in the example below. Several commands are not available in Edit mode. For instance, you are unable to use conditional formatting or alter the alignment of a cell's contents when Excel is in Edit mode. Also, when Excel is in Edit mode, the arrow keys operate significantly differently. In Edit mode, the arrow keys move the cursor inside the cell as opposed to moving it from cell to cell.

Learn more about cell here:

https://brainly.com/question/30046049

#SPJ4

Unfortunately, it is not possible to provide the answers to the practice problems for CMU CS Academy Unit 2.4 as these are meant to be solved by the students themselves.

CMU CS Academy is an online, interactive, and self-paced computer science curriculum developed by Carnegie Mellon University (CMU). It is designed to give students the opportunity to learn computer science fundamentals in a fun and engaging way. With its interactive and self-paced structure, students can learn at their own pace and engage with the materials in an engaging, dynamic way.

The curriculum covers topics such as problem solving, programming, algorithms, data structures, computer architecture, and more. With its intuitive and interactive design, students can learn and apply the concepts learned in a step-by-step manner. CMU CS Academy also provides tools and resources to help students on their learning journey, such as online quizzes, tutorials, and project-based learning.

To learn more about Carnegie Mellon University on:

brainly.com/question/15577152

#SPJ7

The start symbol S generates the first two 'a's of the string and passes the rest of the production to B.

The grammar for the language L = {an | n is even} can be represented as follows:

S → AA

A → aa

The start symbol S derives two nonterminals A, which in turn generate pairs of 'a's to form even-length strings of the language.

The grammar for the language L = {an | n is even and n > 3} can be represented as follows:

S → aaB

B → AAA

A → aa

The start symbol S generates the first two 'a's of the string and passes the rest of the production to B. B generates an even number of 'a's greater than 4, by producing three nonterminals A, each of which generates two 'a's.

Learn more about strings :

https://brainly.com/question/30099412

#SPJ4

A method is a block of code that runs only when it is called this statement is true which is known as parameters, into a method.

A Python function is a function of block of code which only runs specifically when it is called by name and proper number of arguments. To replace users can pass data which is known as arguments to replace the parameters of a function.

Function is one of the  essential concept in coding , which helps you to store a piece of code that does a single task inside a defined block, and then you can call that code whenever you need it using a single short command — you do not need to type out the same code multiple times.

This method is a block of code which only runs when it is called by the user . You can pass data, known as parameters, into a method. Methods are used to perform certain specific actions, and they are also known as functions.

A code block is also referred to as a compound statement which is a defined structure of source code which is grouped together. Blocks consist of one or more than one  declarations and statements.

Learn more about parameters here:-

brainly.com/question/30044716

#SPJ4

Based on variables including the ambient noise level sequence in the environment and unique hearing traits, the subjective loudness level of 50 dB may be experienced differently.

The lowest pitch that the human ear can hear is 20 Hz, while the highest pitch is 20 kHz (highest pitch). Although some creatures, such as the mole-rat and elephant, are capable of hearing infrasounds, all sounds below 20 Hz are classified as infrasounds.

The threshold of hearing is the lowest sound that the human ear can detect at a frequency of 1000 Hz, which corresponds to an intensity of approximately 1.00 10-12 W/m2.

To know more about frequency  visit:-

https://brainly.com/question/9632867

#SPJ4

Two spaces after a period two spaces after a period no double-spacing no double-spacing use a professional tone use a professional tone.

The space is an area that is free of physical and mental boundaries. It is a place where one can be free to explore their inner thoughts and feelings without judgement or limitation. It is an environment that is both calming and inspiring, allowing us to tap into our creativity and express ourselves in new ways. It is a place of reflection and contemplation where one can find clarity and insight. Space allows us to cultivate mindfulness and purpose, and to appreciate the moment. It is a sanctuary that encourages us to take a step back, breathe, and reconnect with ourselves.

To learn more about spaces

https://brainly.com/question/20630228

#SPJ1

If you encounter the notice "Your device is missing essential security and quality fixes" on your Windows device, it implies that Windows has determined that some updates.

or patches are missing from your system, which might be critical to its security or performance. Here are some methods you may take to resolve the problem: Keep an eye out for updates: Check the Windows Update settings for any available updates. Install all available updates, including optional ones. Run the Windows Update Troubleshooter: Windows has a troubleshooter that can assist in identifying and resolving difficulties with Windows updates. Search for "troubleshoot" in the Start menu, pick "Troubleshoot settings" and click on "Additional troubleshooters". Choose "Windows Update" to launch the troubleshooter.

learn more about  security  here:

https://brainly.com/question/28070333

#SPJ4

True. Digital transmission can transmit data faster and more accurately than analog transmission.

What is Transmission?
Transmission is a free and open-source software for downloading, sharing and distributing electronic files, such as music, videos, images and documents. It is a cross-platform application that runs on multiple operating systems (including Windows, Mac, Linux, and BSD), allowing users to easily access and share files with others. It is an efficient, reliable and lightweight program that enables users to securely download, upload and share files with others, while providing an intuitive user interface. Transmission also offers advanced features, such as bandwidth control, encryption, proxy support, torrent creation, and more. It uses the BitTorrent protocol to share files and is one of the most popular BitTorrent clients available.

To know more about Transmission
https://brainly.com/question/24373056
#SPJ4

The answer that links every device in a rack toward the other devices on the network is option a.

Every electrical component with some computer power and the capacity to install firmware or fourth software qualifies as a device. A desktop computer, speakers, printer, and microphone are examples of common hardware. A technology can be additionally described to as an electronic instrument, an appliance, or a gadget.

Devices are objects or systems that have a specific purpose or goal, such as online communications devices like cell phones. Yet, the expression "left with my own devices" refers to your independence and capacity for amusement.

To know more about Devices visit :

https://brainly.com/question/30630218

#SPJ4

To create this in python using for loops is  investment = float(input("Enter the investment amount: ")) , interest = float(input("Enter the interest rate: "))

min_dur = int(input("Enter the minimum duration: "))

max_dur = int(input("Enter the maximum duration: "))

# Calculate the future value of the investment using a for loop

future_value = 0

for x in range(min_dur, max_dur + 1):

  future_value += investment * (1 + interest) ** x

# Print the future value of the investment

print("The future value of the investment is:", future_value)

A loop is a structure in the programming language that lets code run again and again. It can be used to carry out a set of instructions until a particular condition is satisfied or a particular number of times are repeated. When dealing with repetitive tasks like printing a series of numbers or doing a calculation on a large set of data, loops are helpful.

Looping is the process of repeating something until a particular condition is met. In Python, a for loop is a control flow statement that repeats the execution of a set of statements as long as the condition is met. An iterative statement is another name for this kind of statement.

Learn more about loop:

brainly.com/question/23419814

#SPJ4

Answer:

0.875

Explanation:

To calculate the traffic intensity on a 2 Mbps access link, we need to know the amount of data that is being transmitted per second. To do this, we can multiply the number of objects downloaded per second (35) by the average object size (50,000 bits).

[tex]35 objects * 50,000 bits/object = 1,750,000 bits/second[/tex]

Next, we can divide the total data transmitted per second by the link capacity.

[tex]1,750,000 bits/second / 2,000,000 bits/second = 0.875[/tex]

So, the traffic intensity on the 2 Mbps access link is 0.875. This means that the link is being used at 87.5% of its capacity.

To create a numeric vector named "scores", you can use the c() function in R. The c() function allows you to combine values into a vector.

You can specify the values you want to include in the vector within the parentheses of the c() function. For example:
scores <- c(90, 85, 92, 88, 95)
This will create a numeric vector named "scores" with the values 90, 85, 92, 88, and 95. You can also use the seq() function to create a numeric vector with a sequence of numbers. For example:
scores <- seq(90, 100, 2)
This will create a numeric vector named "scores" with the values 90, 92, 94, 96, 98, and 100.

Learn more about a numeric vector here:https://brainly.com/question/14584599

#SPJ11

Financial difficulties including a high ratio of spending to income and a lack of savings can result in financial stress, which can have a variety of adverse effects like anxiety, depression, and other health issues.

Calculating the cost-to-income ratio involves dividing operating expenses by operating income, which is defined as net interest income plus other income. Operational expenses equal the cost-to-income ratio. Operational Costs = Employee Cost + Other Operating Expenses, where Operating Income is the result.

Savings refers to gradually setting money aside, usually into a bank account. Individuals typically set aside money for a specific purpose, such as a down payment on a home or car or unexpected expenses.

To know more about account visit:-

https://brainly.com/question/14080866

#SPJ4

The selected cells are formatted as percentages with no leading zeros using the percent style button.

The word "General" is the default in the box. To bring down the additional selections, click on the arrow to the right of the box. Pick "Percentage" from the list's items. With two places after the decimal point, the cell will automatically be formatted as a percentage.

To open the Format Cells dialogue box, click the icon next to Number in the Number group on the Home tab. Click Percentage in the Category list of the Format Cells dialogue box.

To know more about style button visit:-

https://brainly.com/question/19416428

#SPJ4

A removable hard drive is a type of external storage device that can be used to store and transfer data. It is usually connected to the computer via a USB cable, Firewire, or eSATA connection. Removable hard drives are often used to back up important data or to transfer data from one computer to another.

What is Data?
Data is the fundamental building blocks of information. It can be described as raw facts and figures which can be collected, stored, manipulated and analyzed to create meaningful insights. Data can take many forms such as numbers, words, images, videos, audio, or any other form of information. It is used to answer questions and solve problems in various industries such as finance, healthcare, education, and government. Data can be collected from various sources such as surveys, interviews, observations, experiments, and sensors.

To know more about Data
https://brainly.com/question/26711803
#SPJ4

The two port states that are considered stable states used when STP has completed convergence are Blocking and Forwarding.

STP, or Spanning Tree Protocol, is a network protocol used to prevent loops in a network. During the process of convergence, STP goes through several port states, including listening, learning, blocking, and forwarding. Once STP has completed convergence, the port states will either be in a blocking state or a forwarding state.

In the blocking state, the port will not forward any frames and will only listen for BPDUs (Bridge Protocol Data Units). In the forwarding state, the port will forward frames and also listen for BPDUs. These two states are considered stable because they do not change unless there is a change in the network topology.

Therefore, the correct answers are a. Blocking and b. Forwarding.

Lear More About Port States

https://brainly.com/question/1030711

#SPJ11

Level 0 indicates an emergency that could severely impact the system and cause it to become unusable.

Syslog is a message logging standard in computing. It enables the division of labour between the software that creates messages, the system that stores them, and the software that reports and analyses them. Each message has a facility code that identifies the kind of system that generated it and a severity level.

Syslog can be used by computer system designers for general informational, analytical, and debugging messages as well as system management and security auditing. The syslog standard is used by a wide range of hardware, including printers, routers, and message receivers on numerous platforms. This enables the centralization of logging data from various kinds of systems. There are syslog implementations for numerous operating systems.

Learn more about Syslog

https://brainly.com/question/30000669

#SPJ4

24-hour concierge service, valet parking, room service, spa, pool, bar, gym, sauna, complimentary breakfast, luxury bathrobes, mini-bar, daily housekeeping, and shuttle service.

The above list of supporting details could be used to further enhance the scratch list provided. 24-hour concierge service would ensure that guests can always get help with any of their needs, from finding the best local attractions to ordering room service. Valet parking will make it easy for guests to get to and from their hotel. Room service is a great bonus for those who don't want to leave the hotel for a meal. Having a spa, pool, bar, gym, and sauna would provide guests with plenty of options to stay active or relax during their stay. Complimentary breakfast and luxury bathrobes would make their stay even more comfortable. A mini-bar is great for those wanting a late-night snack or drink, while daily housekeeping and a shuttle service will make it easier to get around town. All of these supporting details would contribute to an enjoyable stay for guests at the four-star hotel restaurant.

Learn more about service here:

https://brainly.com/question/29531817

#SPJ4

The error message "unregistered authentication agent for Unix-process" typically occurs when you are trying to use an authentication agent (such as ssh-agent) without properly registering it with your system.

What is Authentication?

Authentication is the process of verifying the identity of a user, system, or device attempting to access a particular resource or service. The goal of authentication is to confirm that the person or entity claiming to be a particular user or system is indeed who they say they are.

Authentication typically involves the use of credentials, such as a username and password, a security token, or a biometric factor, which the user or system must provide to gain access. The system then compares the provided credentials to a database of authorized users or systems to confirm that the credentials are valid and match an existing user or system.

Authentication is a critical aspect of security and is used to protect sensitive information and resources from unauthorized access. It is often used in conjunction with other security measures, such as authorization, encryption, and auditing, to ensure that only authorized users or systems can access protected resources.

The error message "unregistered authentication agent for Unix process" typically occurs when an SSH agent is not running or has not been registered with the user's session. Here are some steps you can take to solve this issue:

1. Check if an SSH agent is running: Open a terminal and type the command "eval ssh-agent -s". If an agent is already running, this command will output some environment variables. If not, it will start a new agent and output the environment variables that you need to set.

2. Set the environment variables: If the ssh-agent command outputted some environment variables, copy and paste the output into the terminal. If not, use the output from the command in step 1.

3. Add your SSH key: Use the ssh-add command to add your SSH key to the agent. For example, type "ssh-add ~/.ssh/id_rsa" to add the default private key.

Therefore, If the above steps do not solve the issue, try restarting your computer or checking your SSH configuration files to ensure that they are correct.

To learn more about Authentication click here

https://brainly.com/question/13615355

#SPJ4

PESTEL stands for political, Economic, sociological, Technological, Environmental, and Legal factors that can affect an organization.

A common strategic framework for assessing the business environment in which a firm works is the PESTEL analysis. In the past, the framework was known as a PEST analysis, which stood for Political, Economic, Social, and Technical. More recently, the framework's scope was expanded to incorporate environmental and legal considerations.

In their strategic planning procedures and enterprise risk management planning, management teams and boards employ the framework. The financial analyst community, where factors may affect model assumptions and financing decisions, as well as management consultants who assist their customers in creating creative product and market efforts, both use PESTEL research as a very popular tool.

Learn more about PESTEL analysis

brainly.com/question/28310527

#SPJ4

Answer:

true

Explanation:

The sideband separation would be 6 kHz. The term "frequency" in physics and engineering refers to the number of recurring events per unit of time.

The carrier frequency (FC) for am radio ranges from 530 to 1600 kHz.The modulated carrier is sent to receivers at an intermediate frequency, fif, of 455 kHz. What value of RC is suitable to recover the message from the 455 kHz modulated carrier if the message is a 2.5 kHz tone? The unit of measurement for frequency is hertz (Hz), which represents the quantity of cycles or occurrences per second. A frequency of 1 Hz, for instance, indicates that an event occurs once every second, whereas a frequency of 2 Hz indicates that the event occurs twice per second. The sidebands are found at the sum and difference frequencies of the carrier frequency and the modulating frequency in a single-frequency sine wave modulating signal.

Learn more about Frequency here:

https://brainly.com/question/30149622

#SPJ4