Answer:
non polar and neutral polar and neutral acidic and polar basic and polar
. Answer the following: 7 x 2 = 14
1. Find
1. Find
2/3÷4
Explanation:
2/3 ÷ 4 = 0.166
I think this should be the answer
Explanation:
[tex] \frac{2}{3} \div 4[/tex]
[tex]make \: 4 \: as \: \frac{1}{4} \: since \: is \: divide[/tex]
[tex] \frac{2}{3} \times \frac{1}{4} [/tex]
[tex] \frac{2}{12} = \frac{1}{6} [/tex]
Hope this is correct and helpful
HAVE A GOOD DAY!
Determine the identity of an unknown element X using the given table and following clues:
I) Element X is a solid
II) Element X will bond ionically with element O in a 1:1 ratio.
III) As a positive ion, it will have the same number of electrons as argon.
A) calcium
B) chlorine
C) potassium
D) sulfur
Answer:
calcium
Explanation:
A reaction in which A, B, and C react to form products is zero order in A, one-half order in B, and second order in C.
a. Write a rate Jaw for the reaction.
b. What is the overall order of the reaction?
c. By what factor does the reaction rate change if [A] is doubled (and the other reactant concentrations are held constant )?
d. By what factor does the reaction rate change if [B] is doub led (and the other reactant co ncen trati ons are held consta nt )?
e. By what factor does the reaction rate change if [C] is doubled (and the other reactant concen trations are held constant)?
f. By what factor does the reaction rate change if the concentrations of all three reactants are doubled?
Answer:
a. [tex]r=k[B]^{1/2}[C]^2[/tex]
b. [tex]Order=3.5[/tex]
c. It does not affect the rate.
d. [tex]\sqrt{2}[/tex].
e. 4.
f. 4[tex]\sqrt{2}[/tex].
Explanation:
Hello,
In this case, considering the given information, we have:
a. [tex]r=k[B]^{1/2}[C]^2[/tex]
b. By adding 1/2 and 2 (powers for B and C), the overall order is:
[tex]Order=\frac{1}{2} +2\\\\Order=3.5[/tex]
c. It is not changed, since the concentration of A is not affecting the rate due to its specific zeroth-order.
d. In this case, if the concentration of B is doubled, such term in the equation shows:
[tex]\sqrt[n]{x} \frac{r_f}{r_i}=\frac{[2B]^{(1/2)} [C]^2}{[B]^{(1/2)}[C]^2} \\\\\frac{r_f}{r_i}=\frac{[2B]^{(1/2)}}{[B]^{(1/2)}}\\\\\frac{r_f}{r_i}=(\frac{2}{1})^{1/2}\\\\r_f=\sqrt{2} r_i[/tex]
It means that the rate increases by a factor of [tex]\sqrt{2}[/tex].
e. In this case, if the concentration of C is doubled, such term in the equation shows:
[tex]\frac{r_f}{r_i}=\frac{[B]^{(1/2)}[2C]^2}{[B]^{(1/2)}[C]^2} \\\\\frac{r_f}{r_i}=(\frac{[2C]}{[C]})^{2}\\\\\frac{r_f}{r_i}=(\frac{2}{1})^{2}\\\\r_f=4r_i[/tex]
It means that the rate increases by a factor of 4.
f. In this case, if the concentration of both B and C are doubled, such terms in the equation shows:
[tex]\frac{r_f}{r_i}=\frac{[2B]^{(1/2)}[2C]^2}{[B]^{(1/2)}[C]^2} \\\\\frac{r_f}{r_i}=\frac{2^{(1/2)}2^2}{1^{(1/2)}1^2} \\\\\frac{r_f}{r_i}=4\sqrt{2} \\\\r_f=4\sqrt{2} r_i[/tex]
It means that the rate increases by a factor of 4[tex]\sqrt{2}[/tex].
Best regards.
A farmer applies 1455 kg of a fertilizer that contains 10.0% nitrogen to his fields each year. Fifteen percent (15.0%) of the fertilizer washes into a river that runs through the farm.If the river flows at an average rate of 0.175 cubic feet per second, what is the additional concentration of nitrogen (expressed in milligrams of nitrogen per liter) in the river water due to the farmer's fertilizer each year?
Answer:
the additional concentration of nitrogen in the water = 0.1396 mg/L
Explanation:
Given that a farmer uses 1455 kg of fertilizer → 10% nitrogen
15% of the fertilizer is said to be washed into the river,
i.e.
(15/100) × 1455 = 218.25 kg
The amount of nitrogen molecule in the washed fertilizer is :
10% of 218.25 kg
= (10/100) × 218.25 kg
= 0.1 × 218.25 kg
= 21.825 kg in a year.
The river flows at an avg. rate of 0.175 ft³/sec
Then the amount of river water in a year = [tex]0.175 \dfrac{ft^3}{sec}\times 3.155 \times 10^7 \ sec[/tex]
since 1 ft³ = 28.3168 L
the amount of river water in a year = [tex]0.175(28.3168)\times 3.155 \times 10^7 \ L[/tex]
the amount of river water in a year = 156344132
The concentration of nitrogen molecule= mass/volume
= [tex]\dfrac{ 21.825 \times 10^6 \ mg}{ 156344132 \ \ L }[/tex]
= 0.1396 mg/L
Thus, the additional concentration of nitrogen in the water = 0.1396 mg/L
Which statements are true about triangle ABC and it’s translated image, ABC? Select two options.
How does your Skeletal and Muscular Systems work together?
Muscles move your bones
Bones move your muscles
Heart pumps blood throughout the body
Your bones protect your muscles
Answer:
Answer would be A, Muscles move your bones
Explanation:
Without the Muscular System, your bones would not be connected properly
what happens when the net forces are the same, do you add or subtract it
Answer:
If two forces act on an object in the same direction, the net force is equal to the sum of the two forces.
Explanation:
google is my explanation
Answer:
Answered by Oreo!
Explanation:
So a net force is the sum of all forces acting on an object! The question u asked is if the net forces are the same, do u add or subtract it.. <= the answer to that would be:
If it’s the same than the net force is the sum of the forces...
The net force = to the sum of two forces
Hope this helps! Sorry if something didn’t go right, I’m new to brainly! :)
What period is Zn (zinc) in?
O A. 2A
O B. 12
O C. 30
D. 4
Answer:
D. 4
Explanation:
Strontium-90 is radioactive and has a half life of 28.8 years. How much of a 2.90mg sample would be left after 137. years?
Round your answer to 2 significant digits. Also, be sure your answer has a unit symbol.
Answer:
0.11 mg
Explanation:
From the question given above, the following were obtained:
Half life (t½) = 28.8 years
Original amount ((N₀) = 2.90 mg
Time (t) = 137 years
Amount remaining (N) =?
Next, we shall determine the rate of disintegration (K). This can be obtained as follow:
Rate of decay (K) = 0.693/ half life (t½)
K = 0.693 / t½
Half life (t½) = 28.8 years
Rate of decay (K) =?
K = 0.693 / t½
K = 0.693 / 28.8
K = 0.0241 /year
Finally, we shall determine amount remaining after 137 years as follow:
Original amount ((N₀) = 2.90 mg
Time (t) = 137 years
Rate of decay (K) = 0.0241 /year
Amount remaining (N) =?
Log (N₀/N) = kt/2.3
Log (2.9/N) = 0.0241 × 137 / 2.3
Log (2.9/N) = 3.3017 / 2.3
Log (2.9/N) = 1.4355
Take the antilog of 1.4355
2.9/N = antilog (1.4355)
2.9/N = 27.26
Cross multiply
2.9 = N × 27.26
Divide both side by 27.26
N = 2.9/27.26
N = 0.11 mg
Therefore, the amount remaining after 137 years is 0.11 mg
What property of water makes it possible for water from the ground to travel all the way up to leaves in the tops of tall trees?
Answer:
cohesion-tension
Explanation:
i did the quiz.
help me ill give brainliest i need help with a b c d and to see if i got propene and methane right please help :(
Answer:Yes, you got it right
Explanation:
Pls give brainliest
unit processes in charge of smelting
Answer:
Smelting, process by which a metal is obtained, either as the element or as a simple compound, from its ore by heating beyond the melting point, ordinarily in the presence of oxidizing agents, such as air, or reducing agents, such as coke.
Hope I helped!
Explanation:
0.400 mole of sucrose, C 12H 22O 11, contains ________ C atoms.
Answer:
2.89x10²⁴ atoms of Carbon are contained in 0.400 moles of sucrose
Explanation:
The formula of sucrose is C₁₂H₂₂O₁₁, that means per mole of sucrose you will have 12 moles of carbon. In 0.400 moles of sucrose you will have:
0.400 moles Sucrose * (12 moles C / 1 mole Sucrose) = 4.8 moles of Carbon
To convert moles to atoms you must use Avogadro's number (1 mole contains 6.022x10²³ atoms):
4.8 moles Carbon * (6.022x10²³ atoms / 1 mole) =
2.89x10²⁴ atoms of Carbon are contained in 0.400 moles of sucrose0.4 mole of sucrose, C₁₂H₂₂O₁₁ contains 2.89×10²⁴ carbon atoms
How to determine the mole of carbon1 mole of C₁₂H₂₂O₁₁ contains 12 mole of C.
Therefore,
0.4 mole of C₁₂H₂₂O₁₁ will contain = 0.4 × 12 = 4.8 mole of C
How to determine the atoms of carbonFrom Avogadro's hypothesis,
1 mole of C = 6.02×10²³ atoms
Therefore,
4.8 mole of C = 2.89×10²⁴ atoms
Thus, 0.4 mole of sucrose, C₁₂H₂₂O₁₁ contains 2.89×10²⁴ carbon atoms
Learn more about Avogadro's number:
https://brainly.com/question/26141731
Which one correctly lists the compound that has the highest boiling point from each group it belongs to? Group I: SiH 4, SnH 4, CH 4, and GeH 4 Group II: HCl, HBr, HF, and HI Group I: SiH4 and Group II: HF Group I: SnH4 and Group II: HF Group I: SnH4 and Group II: HI Group I: CH4 and Group II: HI Group I: CH4 and Group II: HF
Answer:
Group I: SnH4 and Group II: HF
Explanation:
In the case of group 14 hydrides, we know that the melting and boiling points of compounds increase down the group. Since the melting and boiling points of compounds increase down the group, SnH4 will have the highest boiling point.
In the case of group 17 hydrides, we know that electro negativity decreases down the group. As electro negativity decreases, so does the magnitude of hydrogen bonding among group 17 hydrides. Hence, HF has the highest boiling point among group 17 hydrides since it has the greatest magnitude of hydrogen bonding between its molecules.
Which of the following species is the least nucleophilic?A) (CH3)3NB) BF3C) H2OD) (CH3)3CO-E) CN-
Answer:
BF3
Explanation:
BF3 possesses an open sextet. This implies that the octet around the central atom is incomplete. As a result of this, BF3 will function as an electrophile rather than as a nucleophile.
Hence of all the compounds listed in the options, BF3 is the least nucleophillic.
If the atom has a MASS of 127 and 45 NEUTRONS, then it contains how many
PROTONS

Answer:
53
Explanation:
because minus 3
Theories in science can be disproved through new or extended research.
1. True
2. False
Answer:
True
Explanation:
This is true because technology advances all the time and even Newton's "Laws" could be disproved in the future.
Answer:
True
Explanation:
Based on new research we find out new things
Which phrase is evidence of the limits of what science can study?
This question is incomplete; here is the complete question:
Which phrase is evidence of the limits of what science can study?
A. Only a phenomenon that a scientist can observe with instruments
B. Only a phenomenon that a scientist can observe without instruments
C. Only a phenomenon that a scientist will be able to explain with certainty
D. Any phenomenon that a scientist can observe or model
The correct answer is D. Any phenomenon that a scientist can observe or model
Explanation:
Science focuses on phenomena that can be objectively studied or witnessed. This includes any phenomenon a scientist can register using observation, instruments, or that can be represented through models. This is because, through observations or instruments, it is possible to prove the phenomenon occurs and understand how this happens; also, models can represent or recreate the phenomenon itself, which is essential to understand and explain the phenomenon. Moreover, science has an objective focus and due to this, aspects such as personal beliefs that cannot be represented through a model or be observed are not part of science. According to this, the correct answer is D.
water is denser than oil. When frozen, the oil sinks to the bottom. Why?
Answer: When water freezes it gets larger and becomes a solid but it still weighs the same as when it was a liquid form. When it becomes larger it takes up space but makes it less dense. Ok so getting to the point- oil unlike water becomes more dense when frozen so this is why oil sinks in water. Sorry if this was confusing but I hope it helped have a great day and god bless you :3
Using the tools and knowledge of science to solve a problem or build new technology is called...
Answer:
Invention
Explanation:
Scientific ideas can be applied in novel was to solve new scientific problems and create new technology. This process helps to make life easier and better.
The application of scientific knowledge to solve new problems and create new technology is generally referred to as invention.
How many molecules are in 237 g (about a cup) of water? a. 1513.1 b. 4267 c. 6.02 * 1023 d. 93 * 1024 e. 7.93 * 10 24
Answer:
7.93E24 molecules of water
Explanation:
determine no. of moles of water: 237 g/18 g/mole H2O= 13.17 moles H2O
13.17 moles H2O x 6.02E23 molecules/mole= 7.93E24 molecules of water
Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 7.93×10²⁴ molecules are in 237 g (about a cup) of water. The correct option is option E.
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.
Mathematically,
number of moles of water=237 g÷18 g/mole
number of moles of water = 13.17 moles
number of atoms/molecules=number of moles × 6.022×10²³(Avogadro number)
molecules of water=13.17 moles x 6.02×10²⁴
molecules of water=7.93×10²⁴ molecules of water
Therefore, 7.93×10²⁴ molecules are in 237 g (about a cup) of water. The correct option is option E.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ5
Which element is the
most reactive?
A . Silicon
B. oxygen
C. lithium
D . Aluminum
Good's buffers are compounds that are useful near neutral pH. MES buffer has pKa of 6.15, MOPS has pKa of 7.5, and HEPPS has pKa of 8.0.Required:Identify which Good's buffers are most effective near pH 7.0 and near pH 6.0.
Answer:
MES for pH near to 6.0 and MOPS for pH near to 7.5.
Explanation:
Hello,
In this case, given that the Henderson-Hasselbach equation is:
[tex]pH=pKa+log(\frac{[Base]}{[Acid]} )[/tex]
Good's buffers are those having pKa's near to the required pH since we look for a [Base]/[Acid] ratio to approach 1, thus, for a pH near to 7.0 a good buffer may be MOPS as it has a pKa of 7.5 and for a pH neat to 6.0 a good buffer may be MES as it has a pKa of 6.15.
Best regards.
Which of the following solutions is basic?a. [H3O+] = 1.0 x 10-10 Mb. [OH-] = 1.0 x 10-10 Mc. [H3O+] > 1.0 x 10-7 Md. [OH-] < 1.0 x 10-10 Me. [OH-] = 1.0 x 10-7 M
Answer:
[H3O+] = 1.0 x 10-10
Explanation:
A basic solution is any solution whose pH is above 7.0.
If we carefully calculate the pH of each of the species listed among the options, we will discover that it is only [H3O+] = 1.0 x 10-10 that has a pH of 10.0. This pH corresponds to a basic solution. Hence the solution having [H3O+] = 1.0 x 10-10 is a basic solution.
Question 3 of 10
Which of the following is an example of a phase change from liquid to solid?
A. Ice melting
B. Water freezing
C. Water evaporating
D. Water condensing
Answer:
the answer is B
Explanation:
B is the answer
PLEASE HELP WILL MARK BRAINLIEST!!!!!!!!
Explanation:
1. 4×10^5
2. 6×10^-4
3. 2.1995×10^7
4. 5.050×10^-2
5. 7280
6. 0.00003608
7. 940.9
8. 0.0015
Marks as brainest
Answer:
not sure
Explanation:
Which element has fewer than 4 dots In its Electron dot diagrams
Answer:Strontium (Sr) and Gallium (Ga)
Explanation:
Strontium (Sr) and Gallium (Ga) are the elements which have fewer than four dots in the electron dot diagrams. Explanation: Electron dot diagrams are the diagrams which represent the valence electrons in an element. The electrons are represented by the dots in these diagrams.
When finding the density of a solid, which situation prevents us from being
able to accurately find the volume displacement?
a) if the solid floats
b) if we use an analytical balance
c) if the solid sinks
d) if we use a graduated cylinder
Answer:
a) if the solid floats
Explanation:
Hello,
In this case, since the determination of the volume of a solid when submerged in water requires to use an analytical balance to measure the mass, but also it is necessary that the solid sinks in order to completely displace the what in the graduated cylinder which accurately provides the volume of the solid via its scale. Therefore, a draw back is a) if the solid floats since the water is not completely displaced.
Best regards.
Hafnium (Hf) has six naturally occurring isotopes: 0.16% of 174Hf, with an atomic weight of 173.940 amu; 5.26% of 176Hf, with an atomic weight of 175.941 amu; 18.60% of 177Hf, with an atomic weight of 176.943 amu; 27.28% of 178Hf, with an atomic weight of 177.944 amu; 13.62% of 179Hf, with an atomic weight of 178.946 amu; and 35.08% of 180Hf, with an atomic weight of 179.947 amu. Calculate the average atomic weight of Hf.
Answer:
178.463 amu
Explanation:
Average atomic weight of Hafnium is calculated as follows;
[(0.0016 × 173.940) + (0.0526 × 175.941) + (0.186 × 176.943) + (0.2728 × 177.944) + (0.1362 × 178.946) + (0.3508 × 179.947)] =0.278 + 9.234 + 32.911 + 48.543 + 24.372 + 63.125 = 178.463 amu
Therefore, average atomic weight of Hafnium is 178.463 amu
what is the molar mass of PbCO₄
Answer:
283.211
Explanation:
