The equilibrium constant, represented as Kc or Keq, is a value that expresses the extent of a chemical reaction at equilibrium
The characteristics of the equilibrium constant include:
It is a constant value: The equilibrium constant has a fixed value at a given temperature and pressure for a particular chemical reaction. It is independent of the initial concentrations (or partial pressures) of the reactants and products, and it does not change with time once equilibrium has been reached. It is related to the degree of completion of a reaction: The magnitude of the equilibrium constant indicates the degree to which a reaction has proceeded towards completion. It is affected by temperature: The equilibrium constant is dependent on temperature. It depends on the stoichiometry of the reaction: The equilibrium constant is calculated based on the stoichiometry of the balanced chemical equation for the reaction. It can be used to predict the direction of the reaction: The value of the equilibrium constant can be used to predict the direction in which the reaction will proceed under certain conditions.
To learn more about equilibrium please visit- https://brainly.com/question/28527601
#SPJ4
You started a savings account by depositing $4,200. The savings account earns 2.1% APY, compounded monthly. What was the balance in the account after 2 months
The compound interest for two months will be $13.98. Then, after two months, there will be $ 4213.98 in the account.
What is compound interest ?Compound interest is the interest on normal interest. Compound interest for an amount p for a n years with a rate of interest R% can be calculated as follows:
A = P [1 + r/100]ⁿ
Given that, the amount p = $4200
rate of compound interest = 2.1 %
time period n = 2 months, it is 0.16 years.
Now the compound interest for two months = $ 4200× [1 + 2.1/100]^0.16 - $4200 = $13.98
Now, the amount after two months will be $ 4213.9.
Therefore, there will be $4213.9 in the account after two months.
Find more on compound interest :
https://brainly.com/question/26457073
#SPJ1
experts estimate that the current atmospheric concentration of carbon dioxide is how much higher than it was 250 years ago?
The current atmospheric concentration of carbon dioxide is 40 in 250 years ago
Long-term changes to weather patterns and temperatures are a result of climate change.
The use of fossil fuels (such as coal, oil, and gas), which release heat-trapping gases, has been the primary cause of climate change since the 250s, despite the fact that these changes are natural.
Global warming is the long-term increase in the planet's average temperature.
Even while there has been a long-term warming trend, the usage of fossil fuels over the past century has caused the pace of acceleration to increase.
The usage of fossil fuels has expanded along atmospheric concentration with the global population.
Learn more about atmospheric concentration here
https://brainly.com/question/25312838
#SPJ4
An organic compound containing 40% carbon, 6.67% hydrogen and rest of oxygen, has the molecular mass 180g.mol-1. Find out the EF as well as MF of the compound.
Answer:
The EF of the compound is CH2O and the MF is C6H12O6.
Explanation:
To find the empirical formula (EF) of the compound, we need to determine the simplest whole number ratio of the atoms in the compound. We can assume we have 100 g of the compound, which means we have:
40 g of carbon
6.67 g of hydrogen
53.33 g of oxygen (since the rest of the compound is oxygen)
Next, we can convert the masses to moles:
Moles of carbon = 40 g / 12.01 g/mol = 3.33 mol
Moles of hydrogen = 6.67 g / 1.01 g/mol = 6.61 mol
Moles of oxygen = 53.33 g / 16.00 g/mol = 3.33 mol
We then divide each of the mole values by the smallest number of moles, which is 3.33, to get the simplest whole number ratio:
Carbon: 3.33 / 3.33 = 1
Hydrogen: 6.61 / 3.33 = 1.98 (rounded to 2)
Oxygen: 3.33 / 3.33 = 1
So the EF of the compound is CH2O.
To find the molecular formula (MF), we need to know the molecular mass of the EF. The empirical formula mass (EFM) of CH2O is:
EFM = (1 x 12.01 g/mol) + (2 x 1.01 g/mol) + (1 x 16.00 g/mol) = 30.03 g/mol
We can then calculate the molecular formula mass (MFM) by dividing the given molecular mass (180 g/mol) by the EFM:
MFM = 180 g/mol / 30.03 g/mol = 6
This means the MF is 6 times the EF, or C6H12O6. Therefore
determine the percent error in the experimentally determined value for the enthalpy of formation of mgo.
From the information provided, the percent error in the experimentally determined value for the enthalpy of formation of MgO is 1.96%
To determine the percent error in the experimentally determined value for the enthalpy of formation of MgO, we need to compare the experimental value to the accepted or theoretical value.
The accepted value for the enthalpy of formation of MgO is: -601.8kJ/mol. Let's assume that the experimentally determined value is -590.0 kJ/mol.
The percent error can be calculated using the following formula:
Percent error = |(Experimental value - Theoretical value) / Theoretical value| x 100%
Substituting the values, we get:
Percent error = |(-590.0 kJ/mol - (-601.8 kJ/mol)) / (-601.8 kJ/mol)| x 100%
Percent error = |(11.8 kJ/mol) / (601.8 kJ/mol)| x 100%
Percent error = 1.96%
Learn more about percent error here: brainly.com/question/5493941
#SPJ4
how much heat is required to evaporate 100.0 g of liquid ammonia, nh3, at its boiling point if its enthalpy of vaporization is 4.8 kj/mol?
The total amount of heat required to evaporate hundred gram of liquid Ammonia at its boiling point is found to be 28 KJ.
The enthalpy of vaporization from liquid ammonia is given to be 4.8 kilo joule per mole.
The mass of the liquid ammonia is 100 grams.
The formula to find the amount of heat required to evaporate this ammonia is given by,
Q = nL
Where, m is the moles of ammonia and L is the latent heat of vaporization.
Putting all the values,
Q = 100/17 x 4.8 KJ/mol
Q = 28 KJ
So, a total of 28 kilo joules of energy will be required to evaporate these ammonia.
To know more about heat of vaporization, visit,
https://brainly.com/question/26306578#:~:text=Expert%2DVerified%20Answer&text=The%20heat%20absorbed%20by%20the,vaporize%201%20gram%20of%20liquid.
#SPJ4
How many moles of oxygen atoms are present in 1 mole of Iron (III)oxide?
The formula for Iron (III) oxide is Fe2O3, which means that there are 2 iron atoms and 3 oxygen atoms in one molecule of Fe2O3.
What do you mean by molecules?
A molecule is a group of two or more atoms held together by chemical bonds. These atoms can be of the same or different types. Molecules are the smallest units of a compound that retain the chemical and physical properties of that compound.
Molecules play a critical role in many chemical reactions and biological processes. They can interact with each other through chemical reactions to form new compounds or release energy. Understanding the structure and behavior of molecules is fundamental to understanding many fields of science, including chemistry, biochemistry, and materials science.
The formula for Iron (III) oxide is Fe2O3, which means that there are 2 iron atoms and 3 oxygen atoms in one molecule of Fe2O3.
To find the number of moles of oxygen atoms in 1 mole of Fe2O3, we need to multiply the number of oxygen atoms per molecule by the Avogadro constant (6.022 x 10^23).
Number of moles of oxygen atoms in 1 mole of Fe2O3 = 3 x (6.022 x 10^23) = 1.8066 x 10^24
Therefore, there are 1.8066 x 10^24 oxygen atoms in 1 mole of Fe2O3.
Learn more about moles of oxygen click here:
https://brainly.com/question/29499360
#SPJ1
What is the value of electron gain enthalpy of Na+ if the first Ionization enthalpy of Na is 5.1 e.v
The electron gain enthalpy of Na+ is 5.65 eV.
What is electron gain enthalpy?The amount of energy released when an electron is added to a single gaseous atom is known as the electron gain enthalpy. Energy can either be released or absorbed when an electron is added.
The electron gain enthalpy of Na+ can be calculated using the formula below:
Electron gain enthalpy of Na+ = Ionization enthalpy of Na - Electron affinity of Na
The ionization enthalpy of Na is 5.1 eV.
The electron affinity of Na is -0.55 eV.
Therefore, the electron gain enthalpy of Na+ can be calculated as:
Electron gain enthalpy of Na+ = Ionization enthalpy of Na - Electron affinity of Na
Electron gain enthalpy of Na+ = 5.1 eV - (-0.55 eV)
Electron gain enthalpy of Na+ = 5.65 eV
Learn more about electron affinity at: https://brainly.com/question/977718
#SPJ1
What type of fault has the geologist found?
which solution has a lower vapor pressure? a 0.4m ch4 solution all four solutions given have the same vapor pressure a 0.4m sucrose solution a 0.2m kno3 solution a 0.2m nacl solution
Comparing the four solutions above, the vapour pressure of a 0.4 M CH4 (methane) solution is lowest. This is due to the fact that a solution's vapour pressure is directly inversely proportional to the mole fraction of the solvent.
When the rate of evaporation and condensation are equal, the pressure that a substance's vapour exerts in a closed container is referred to as vapour pressure. It is an indicator of a substance's propensity to evaporate and is influenced by variables including temperature, surface area, and intermolecular forces. A substance with a higher vapour pressure will evaporate more quickly than a substance with a lower vapour pressure at a given temperature. Chemistry, physics, and material science are just a few of the scientific and engineering disciplines where vapour pressure is an important feature. It has significant effects on how liquids and gases behave, including boiling temperatures, distillation, and phase transitions.
Learn more about vapour pressure here:
https://brainly.com/question/14123284
#SPJ4
Okay I actually have a question this time can someone please help me with this table and the question? I tried doing it but my teacher said it was wrong so-
The temperature is increasing the three degrees.
Does heat affect enthalpy of reaction?The enthalpy of a reaction, also known as the heat of reaction, can be affected by changes in temperature. Enthalpy is a measure of the total energy in a system, including both heat and internal energy.
In a chemical reaction, the enthalpy change is the heat absorbed or released during the reaction, which can be measured as the temperature change of the system. When the temperature of a reaction increases, the enthalpy of the system will increase, and when the temperature decreases, the enthalpy of the system will decrease.
Learn more about enthalpy:https://brainly.com/question/13996238
#SPJ1
15.6g potassium (K). How many moles of potassium oxide would be produced assuming you had unlimited oxygen? ____ K + ____ O2 → _____ K2O
15.6g of potassium would produce 1 mole of potassium oxide 15.6g K + 0.8 mol O2 → 1.2 mol K2O.
What is potassium?Potassium is an essential mineral that plays an important role in a number of bodily functions. It is a type of electrolyte that helps regulate the body's water balance, acid-base balance, and heart rate. It also helps to maintain healthy muscle and nerve function, as well as normal blood pressure. Potassium can be found in many foods, including fruits, dairy products, legumes, nuts, and leafy green vegetables.
Assuming you had unlimited oxygen, 15.6g of potassium would produce 1 mole of potassium oxide (K2O). This is because the molar mass of potassium oxide is 94.2 g/mol and there are 2 moles of oxygen for every 1 mole of potassium in the reaction equation: K + O2 → K2O.
Therefore, 15.6g of potassium would produce 1 mole of potassium oxide, which can be calculated as follows:
15.6g K / (39.1g K/mol) = 0.4 mol K
0.4 mol K x (2 mol O2/1 mol K) = 0.8 mol O2
0.4 mol K + 0.8 mol O2 = 1.2 mol K2O
Therefore, the answer is:
15.6g K + 0.8 mol O2 → 1.2 mol K2O
To learn more about potassium
https://brainly.com/question/25380525
#SPJ1
sodium ion concentration in the cytoplasm of a neuron __________ when its sodium channels open.
The sodium ion concentration in the cytoplasm of a neuron increases when its sodium channels open.
This is because the opening of the sodium channels allows for the influx of sodium ions into the cytoplasm, leading to an increase in the content-loaded sodium ion concentration within the cell. As a result, the cytoplasm becomes more positively charged, which can lead to the generation of an action potential and the transmission of a nerve impulse.
The sodium channel itself is the membrane protein that conducts sodium ions (Na⁺) through a cell membrane. It is highly selective to transport sodium ions, which it achieves by encapsulation of the ion in a cavity of a larger molecule.
Learn more about sodium channels at https://brainly.com/question/15905781
#SPJ11
A dog chases a rabbit out of the garden at a speed of 6.0 m/s. If the dog has a momentum of 60.0 kg • m/s then what is his mass
Hi there, here's your answer:
Given the velocity of the dog v = 6.0 m/s
Momentum of the dog P = 60.0 kg m/s
To find:
The mass of the dog.
Solution:
We know that the formula for finding the momentum given the mass of a body and it's velocity is P = m × v.
Substituting the values, we get 60.0 = m × 6.0
Therefore, [tex]m = \frac{60.0}{6.0} = 10kg[/tex]
Thus, the mass of the dog is 10kg.
Hope it helps! Please mark as Brainliest!
The large display shows readings in an extended range from -2.0 to 16.0 pH and simultaneously shows temperature from
The large display can show readings in an extended range from -2.0 to 16.0 pH and temperature from 0°C to 90°C. It can also simultaneously display both of these values so that users can easily compare them.
This means it can display the pH and temperature values of a wide range of solutions and other substances. It can also simultaneously display both of these values so that users can easily compare them. This can be useful for monitoring and analyzing changes in pH or temperature over time, or for analyzing the relationship between pH and temperature.
To know more about pH please refer:
https://brainly.com/question/15289741
#SPJ4
what is the polarity of slime molecules
Slime is a non-Newtonian fluid and does not have a molecular structure that can be considered polar or non-polar. The term "polarity" typically refers to the distribution of electrical charge within a molecule. In the case of slime, the material is made up of polymer molecules, which are long chains of repeating units. These polymer molecules interact with each other through hydrogen bonding, which gives the material its unique properties such as being a non-Newtonian fluid. However, these interactions are not based on polarity, so it is not appropriate to describe slime as being polar or non-polar.
Answer:
The polarity of slime molecules depends on the specific type of slime. There are many different types of slime, each made up of different types of molecules.
For example, if we consider a typical type of slime made from polyvinyl alcohol (PVA), the polarity of the PVA molecules will depend on their molecular structure and the type of bonding between the atoms. PVA is a synthetic polymer made up of repeating units of vinyl alcohol, which has a polar hydroxyl group (-OH). As a result, PVA is considered to be a polar molecule.
However, the overall polarity of a slime made from PVA will also depend on the other ingredients that are present, such as borax, which is often used as a cross-linking agent to form the slime. The overall polarity of the slime will also depend on the conditions it is in, such as the temperature, pH, and the presence of other substances that could affect the polarity of the slime.
In summary, the polarity of slime molecules can be complex and depends on the specific type of slime, the ingredients that make it up, and the conditions it is in.
Explanation:
Just tell me if you kinda confuse
ALLEN
magnesium has an hcp crystal structure, a c/a ratio of 1.624, and a density of 1.74 g/cm3. compute the atomic radius for mg.
The atomic radius of magnesium is approximately 1.736 Å. This can be calculated using the formula: Atomic Radius = (a / 2) * sqrt(3), where a is the lattice parameter for the hcp crystal structure.
To calculate the atomic radius of magnesium, we can use the following formula:
Density = (2 * Atomic Mass) / [(a²) * (c / a) * Na]
where:
Density is the density of magnesium
Atomic Mass is the atomic mass of magnesium
a is the lattice parameter for the hcp crystal structure
c/a is the ratio of the height of the unit cell to the base length of the unit cell
Na is Avogadro's number
We can rearrange this formula to solve for the atomic radius:
Atomic Radius = (a / 2) * sqrt(3)
where:
a is the lattice parameter for the hcp crystal structure
Now, let's plug in the values given in the problem:
Density = 1.74 g/cm3
c/a = 1.624
Na = 6.022 x 10²³ molecules/mol
The atomic mass of magnesium is 24.305 g/mol.
To find the lattice parameter, we can use the fact that the volume of the unit cell is given by:
Volume = a² * (c / a) * sqrt(3) / 2
The density is also related to the volume and the atomic mass by:
Density = Atomic Mass / Volume
We can combine these two equations and solve for a:
a = (4 * Atomic Mass / (sqrt(3) * Density * c))⁽¹/³⁾
Plugging in the values:
a = (4 * 24.305 g/mol / (sqrt(3) * 1.74 g/cm^3 * 1.624))⁽¹/³⁾
a = 3.209 Å
Now we can calculate the atomic radius:
Atomic Radius = (a / 2) * sqrt(3)
Atomic Radius = (3.209 Å / 2) * sqrt(3)
Atomic Radius = 1.736 Å (rounded to three significant figures)
Therefore, the atomic radius of magnesium is approximately 1.736 Å.
Learn more about magnesium atoms here: brainly.com/question/26477621
#SPJ4
Calculate the [H3O+] for 0.0087 M H2SO4
Answer in units of M
0.0174 M is the calculated [H₃O+] for 0.0087 M H₂SO₄. Molarity is an important concept in chemistry.
What is molarity?Molarity, which is defined as the number of moles of solute dissolved per liter of solution, is a measure of a solution's concentration. It is often written with the symbol "M" and is measured in moles per liter (mol/L) units.
The molarity of a solution is determined by dividing the volume of the solution in liters by the number of moles of the solute present in that volume. because it allows us to quantify the amount of substance present in a solution. It is frequently used in stoichiometric calculations to determine the amounts of a chemical reaction's reactant and product that should be known. For instance, if a solution contains 2 moles of solute dissolved in 1 liter of solution, the molarity of the solution is 2 mol/L.
Because it fully dissociates in water, H₂SO₄ is a powerful acid that produces two H+ ions for every molecule that dissociates. As a result, the [H₃O+] in a solution of 0.0087 M H₂SO₄ is twice as molten as the H₂SO₄ solution: [H₃O+] = 2 x [H+] = 2 x 0.0087 M = 0.0174 M.
Accordingly, the [H₃O+] of a H₂SO₄ solution containing 0.0087 M is 0.0174 M.
Learn more about Molarity:
brainly.com/question/14469428
#SPJ1
question 3
pls help asap
The molar mass and the mole ratio from the reaction equation B. 305.9 grams Al2O3
What is molar mass?Molar mass is a physical property of a chemical compound, defined as the mass of a given substance divided by the amount of substance measured in moles. It is expressed in g/mol and is numerically equal to the average atomic weight of the atoms in the compound. Molar mass is used to calculate the mass of a given amount of a substance, as well as to determine the relative atomic mass of an element.
The molar mass of aluminum is 26.98 g/mol, and the molar mass of aluminum oxide is 101.96 g/mol. Using the molar mass and the mole ratio from the reaction equation, we can calculate the amount of Al2O3 produced.
6.000 mol Al x (2 mol Al2O3/3 mol Al) x (101.96 g Al2O3/1 mol Al2O3) = 305.9 g Al2O3
To learn more about molar mass
https://brainly.com/question/837939
#SPJ1
Transcribed image text: Which two rings have approximately the same bond angle in their favored conformations? cyclopropane O cyclobutane O cyclohexane cyclopentane o cycloheptane Which ring(s) sacrifice bond angle to relieve torsional strain? cyclobutane cyclopropane cycloheptane cyclopentane cyclohexane Which strain(s) are a type of steric interaction? O transannular strain O ring strain O torsional strain bond angle strain
The two rings that have approximately the same bond angle in their favored conformations are cyclopropane and cyclopropane. The rings that sacrifice bond angle to relieve torsional strain are cyclopropane and cyclobutane.
Bond angle strain is a type of steric interaction.
A cyclic ring is a closed chain of atoms, typically carbon, that forms a loop or ring structure. Cyclic rings are commonly found in organic molecules, and the properties and behavior of cyclic rings can vary depending on their size, shape, and composition.
Cyclic rings can be classified based on the number of atoms in the ring, with three-membered rings known as cyclopropanes, four-membered rings known as cyclobutanes, five-membered rings known as cyclopentanes, six-membered rings known as cyclohexanes, and so on. The stability and reactivity of cyclic rings can also be affected by the presence of functional groups and the stereochemistry of the ring.
Learn more about cyclic rings here: brainly.com/question/30510120
#SPJ4
an ionic compound will dissolve when the attraction between the ______ molecules and the ions is greater than the attraction between the _____ themselves
An ionic compound will dissolve when the attraction between the polar molecules and the ions is greater than the attraction between the ions themselves.
Polar motes A polar patch is generally formed when the one end of the patch is said to retain more positive charges and whereas the contrary end of the patch has negative charges, creating an electrical pole. When a patch is said to have a polar bond, also the centre of the negative charge will be on one side, whereas the centre of positive charge will be in the different side. The entire patch will be a polar patch.
Ion, any snippet or group of tittles that bears one or further positive or negative electrical charges. appreciatively charged ions are called cations; negatively charged ions, anions. Ions are formed by the addition of electrons to, or the junking of electrons from, neutral tittles or motes or other ions.
Learn more about Ionic compound:
https://brainly.com/question/29348041
#SPJ4
How many moles of glucose did your body consume if you exhale 100 grams of carbon dioxide?
C6H12O6 + 6O2 = 6CO2 + 6H2O
24 g of pure CO2 are exhaled by the individual. To calculate the number of moles, divide the outcome by the molar mass. As a result, the individual exhales about 0.55 moles of carbon dioxide every hour.
What impact on glucose molecule due to exhale of Co2?During aerobic cellular respiration, the interaction of glucose and oxygen results in the production of ATP that the cell can utilize.
As by-products, water and carbon dioxide are produced. The general formula for aerobic cellular respiration is: During cellular respiration, oxygen and glucose combine to create ATP.
CO2 is converted to glucose during photosynthesis, and H2O is oxidized to produce oxygen. Cellular respiration involves the reduction of oxygen and the oxidation of glucose to produce CO2 and water.
CO2 is carried by the bloodstream to the lungs, where it is eventually exhaled out of the body.
Therefore, Hence Number of moles glucose, C6H12O6 = 100g/180g = 0.55 moles.
Learn more about glucose here:
https://brainly.com/question/8394646
#SPJ1
Lewis structure for the ionic compound potassium chloride
Answer:
The Lewis structure for potassium chloride (KCl), which is an ionic compound, cannot be represented by a single Lewis structure. Ionic compounds do not have a covalent bond, instead they have an electrostatic attraction between positive and negative ions. In the case of potassium chloride, potassium (K) has a charge of +1 and chloride (Cl) has a charge of -1. The ionic compound can be represented by showing the positive and negative ions next to each other, separated by a dash or an arrow, like this:
K+ Cl-
Explanation:
Alternatively, it can be represented by a crystal lattice structure, which shows the repeating pattern of positive and negative ions in the solid compound.
What is molar ratio of Mg reacted to H2 produced? what is the stoichiometric ratio between the mg ribbon reactant and the hydrogen gas product?
The molar ratio of Mg reacted to H2 produced is 1:1. This means that for every mole of Mg that reacts, one mole of H2 is produced. The stoichiometric ratio between the Mg ribbon reactant and the hydrogen gas product is also 1:1.
This ratio is determined by the balanced chemical equation for the reaction between Mg and HCl, which is Mg + 2HCl → MgCl2 + H2. The coefficients in this equation represent the number of moles of each reactant and product that are involved in the reaction. The coefficient for Mg is 1, indicating that one mole of Mg reacts with two moles of HCl to produce one mole of H2 and one mole of MgCl2.
The stoichiometric ratio is important because it allows us to determine the number of reactants or products needed in a reaction. For example, if we know the amount of Mg we have, we can use the stoichiometric ratio to calculate the amount of H2 that will be produced. Similarly, if we know the amount of H2 we need, we can use the stoichiometric ratio to determine how much Mg we need to react with HCl to produce the required amount of H2.
Learn more about stoichiometric ratio
brainly.com/question/28297916
#SPJ4
write a chemical formula of one compound formed by the combination of k ions with one of these ions as water completely evaporates from the seawater sample.
Chemical formula of one compound formed by the combination of K+ ions with one of these ions as water completely evaporates from the seawater sample is KCl( Poassium Chloride).
Potassium chloride is an ionic compound that contains the ions K+ and Cl-. The K+ ions and Cl- ions create an ionic connection when the water evaporates from the saltwater sample. Because the K+ and Cl- ions are attracted to each other, the bond forms when the two ions create a symmetrical configuration.
The process of ionic bonding is a key aspect of seawater chemistry. Several dissolved ions are found in seawater, including K+, Na+, Ca2+, and Mg2+. The dissolved ions get concentrated when the water evaporates and interact with other ions to create compounds. In the case of KCl, the K+ ions will create an ionic connection with the Cl- ions, which is a strong bond that binds the two ions together.
For more such questions on ions, click on:
https://brainly.com/question/14511468
#SPJ4
The total pressure of gases inside a vessel is 2.07×104 kPa. The partial pressure of oxygen in the tank is 8.27 × 10³ kPa.
What is the percentage of oxygen in the vessel?
21%
25%
40%
90%
The 40% is the percentage of oxygen in the vessel.
What is pressure ?
As force applied per unit area, pressure is defined. P=FA, where F is the force operating perpendicular to the surface area A, gives it mathematical expression. The pascal (Pa), which equates to a newton per square metre (N/m 2), is the accepted unit of pressure.
What is partial pressure ?
The idea of partial pressure arises from the fact that each individual gas contributes a portion of the total pressure, and that portion is the partial pressure of that gas. In order to describe all the pieces, it is essentially like taking a percentage or fraction of the whole.
Therefore, The 40% is the percentage of oxygen in the vessel.
Learn more about pressure from the given link.
https://brainly.com/question/28012687
#SPJ1
which of the following best describes a functional group? multiple choice question. large molecules comprised of a glycerol and three fatty acid chains special combinations of atoms that attach to hydrocarbon chains and rings to form organic nutrients molecules that are composed of hydrogen and carbon in a long chain or ring-like structure large molecules composed of two or more repeating smaller units
Option (b) is correct. Functional group describes a special combinations of atoms that attach to hydrocarbon chains and rings to form organic nutrients.
Functional groups are classified as any of numerous combinations of atoms that form parts of chemical molecules that undergo characteristic reactions themselves. In many cases it influence the reactivity of the remainder of each molecule. The concept of functional groups is useful as a basis for classification of large numbers of compounds according to their reactions. Some examples of the common functional groups are hydroxyl present in alcohols and phenols, carboxyl present in carboxylic acids, carbonyl present in aldehydes, ketones and quinones. In a simple way it is defined as an atom or group of atoms within a molecule that has similar chemical properties whenever it appears in various compounds even if other parts of the molecule are quite different.
To learn more about Functional group please visit:
https://brainly.com/question/27879244
#SPJ4
The complete question is,
which of the following best describes a functional group?
multiple choice question.
(a) large molecules comprised of a glycerol and three fatty acid chains
(b) special combinations of atoms that attach to hydrocarbon chains and rings to form organic nutrients
(c) molecules that are composed of hydrogen and carbon in a long chain or ring-like structure
(d) large molecules composed of two or more repeating smaller units
the table above provides the values for some physical properties of h2s and h2o . approximately, how many moles of h2s must be condensed to release as much heat as would be released when 1 mole of h2o is condensed? responses
In order to generate the same amount of heat as 1 mole of H2O, approximately 2 moles of H2S must be condensed.
A colourless gas noted for its strong "rotten egg" smell at low concentrations is hydrogen sulphide. It is exceedingly poisonous and combustible.
Compared to hydrogen sulphide, one mole of water requires about 40.7 kJ/mol of enthalpy to vaporise.
To produce the same amount of heat, more hydrogen sulphide must condense into water. Because water has a higher enthalpy of vaporisation than hydrogen sulphide, this happens.
Hence, around two moles of hydrogen sulphide will give the heat produced as one mole of water produces.
Learn more about H2S:
https://brainly.com/question/29460207
The complete question is-
the table above provides the values for some physical properties of h2s and h2o . approximately, how many moles of h2s must be condensed to release as much heat as would be released when 1 mole of h2o is condensed? responses
Given the following occasion 4p+5O2-> 2P2O5. How many moles of P2O5 are formed from 3.4moles of O2
Answer:
3.4 (2/5) (sorry i dont have a calculator )
Explanation:
3.4 moles of O2 x (2 moles of P2O5/5 moles of O2)
= 3.4 (2/5)
a closed piston-cylinder device contains 5l of water vapor are initially at 300 kpa and 200 deg c. the water undergoes some process taking it to a final state of 175 kpa and a quality of 50%. determine the change of enthalpy between the initial and final state
The change in enthalpy (Δh) between the initial and final state is [tex]-48270 kJ[/tex]
The change in enthalpy (Δh) between the initial and final state can be calculated using the following equation:
Δ[tex]h = m (h2 - h1)[/tex]
where m is the mass of water vapor, h1 is the enthalpy of the initial state and h2 is the enthalpy of the final state.
Since the initial state is at 300 kPa and 200°C, the enthalpy of the initial state (h1) can be calculated using the steam tables. From the steam tables, the enthalpy of the initial state (h1) is 2760 kJ/kg.
The final state is at 175 kPa and a quality of 50%. The enthalpy of the final state (h2) can also be calculated using the steam tables. From the steam tables, the enthalpy of the final state (h2) is 1703 kJ/kg.
Now, the mass of water vapor (m) in the closed piston-cylinder device can be calculated using the ideal gas law equation.The following equation is the ideal gas law:
[tex]PV = mRT[/tex]
where R is the gas constant, T is the temperature, V is the volume, m is the mass, and P is the pressure.
Since the volume of the closed piston-cylinder device is 5 liters and the temperature is 200°C, the mass of the water vapor (m) can be calculated as follows:
[tex]m =\frac{ (300 kPa * 5 liters)}{ (0.287 *323.15 K)}[/tex]
Therefore, the mass of the water vapor (m) is 41.6 kg.
Finally, the change in enthalpy (Δh) between the initial and final state can be calculated using the equation given above. Thus,
Δ[tex]h = 41.6 (1703 - 2760) = -48270 kJ[/tex]
Therefore, the change in enthalpy (Δh) between the initial and final state
is [tex]-48270 kJ[/tex].
learn more about enthalpy Refer:brainly.com/question/13996238
#SPJ4
which process requires more energy: completely vaporizing 1 kg of saturated liquid water at 1 atm pressure of completely vaporizing 1 kg of saturated water at 8 atm pressure? explain by using the property table.
The process requires more energy: is completely vaporizing 1 kg of saturated liquid water at 1 atm pressure.
The The process requires more energy: is completely vaporizing 1 kg of saturated liquid water at 1 atm pressure. This is because from the latent heat of vaporization of the each system. For the system 1, saturated the water at 1 atm, the latent heat of vaporization is equal to 40.7 kJ per mole and for, at 8 atm, the latent heat of vaporization is equal to 36.4 kJ per mole.
Thus, the completely vaporizing 1 kg of saturated liquid water at 1 atm pressure requires the more energy.
To learn more about saturated here
https://brainly.com/question/12976073
#SPJ4
