PLEASE ANSWER NEED HELP!!!!!!!! PLEASE THE CORRECT ANSWER!!!!!!
Zhiyu wants to start an exercise program. He knows that he should talk to his doctor, but he cannot get an appointment for several weeks. He does not have any health conditions. What is the BEST advice for Zhiyu?
A.
All exercise needs to be medically supervised, so he must wait.
B.
There is always a risk of injury, so he needs professional advice before he starts.
C.
He can start slowly with low impact activity like walking or light weightlifting.
D.
He should do whatever he feels like; his body will let him know if he overdoes it.
PLEASE NO LINKS OR I WILL REPORT YOU
Answer:
c
Explanation:
Electric current can be measured. It is a rate. What does that mean?
Question 3 options:
The amount of current that passes a certain point in a certain amount of time
The amount of energy available that could be used
The strength of power used by something plugged into a wall
How bright a light will burn when plugged in
Answer:
a
Explanation:
cuz im smart ;)
Please help! Question is attached!
Answer:
1. -6m/s
2. 0m/s
3. 3m/s
4.14.38N
5. 25.9 J
Explanation:
1. point A and C same height means velocity will be the same just in opposite direction, = -6m/s
2. at max height vertical velocity is 0
3. same as point A
4. Weight is mg = 1.438*10 = 14.38N
5. total energy is KE+PE, which never changes
so TE = 32.4 and KE =6.5J then PE = 32.4-6.5 = 25.9 J
What is the number of the of significant figures in 2.50400-.pliz, help me l will mark you the brainest.(⊙_◎)
Answer:
Number of Significant Figures: 6
The Significant Figures are 2 5 0 4 0 0
Explanation:
Non-zero digits are always significant which are in this case 2,5,4, and Any zeros between two significant digits are significant and final zero or trailing zeros are significant therefore making the entire digit significant.
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
The number of significant figures in 2.50400 is ~
[tex] \boxed{6}[/tex]how do i do this question in science?
simple subtract and ummmmmm.....
What is the disappearance of a wave into a medium.
A. Signal
B. Amplitude
C. Absorption
D. Transmission
Answer:
Absorption
Explanation:
the disappearance of an EM wave into the medium. scattering – the spreading out of light rays in all directions because particles reflect and absorb the light.
If a train is moving south at 50 m/s and a person is running SOUTH on the train at 5 m/s, what is the velocity of the person as seen by someone not moving (watching the train going by)
A-45 m/s North
B-50 m/s South
C-55 m/s North
D-100 m/s South
The velocity of the person as seen by someone not moving (watching the train going by) will be 55 m/s South. I can therefore conclude that none of the option given is correct.
Given that a train is moving south at 50 m/s and a person is running SOUTH on the train at 5 m/s.
That means the person is running relatively to the velocity of the train. Since the train and the person are moving in the same direction, the relative velocity seen by an observer watching the train going will be the addition of both the train and the person in the direction of the train.
That is,
Relative velocity = 50 + 5
Relative velocity = 55 m/s South.
Therefore, the velocity of the person as seen by someone not moving (watching the train going by) will be 55 m/s South.
I can therefore conclude that none of the option given is correct.
Learn more here: https://brainly.com/question/14636414
A falling object with a weight of 15N is moving downwards towards earth at a steady speed. What is the size of the drag force on this object?
Answer:
15 N :D
Explanation:
The size of the drag force on this object falling at a constant speed is determined as 15 N.
Drag force on the objectThe drag force on the object is determined by calculating the net force on the object;
F(net) = W - D
where;
W is weight of the objectD is the drag force of airma = W - D
at constant speed, acceleration, a = 0
0 = W - D
W = D
15 N = D
Thus, the size of the drag force on this object falling at a constant speed is determined as 15 N.
Learn more about drag force here: https://brainly.com/question/15237524
#SPJ2
What types of energy do you acquire when you eat a bowl of hot vegetable soup?
Answer:
you need kinetic energy because it is the energy that is used when In motion
The type of energy that one acquire when you eat a bowl of hot vegetable soup is chemical energy.
What is chemical energy?Chemical power the bonds of chemical molecules contain energy. Exothermic reactions are those in which chemical energy is released during the reaction, frequently in the form of heat.
Some of the heat energy needed for a reaction to continue can be stored as chemical energy in newly created bonds.
Food particles go through a chemical reaction that releases chemical energy when we eat it. The body then uses this energy to carry out its regular tasks.
As a result, when you eat a cup of vegetable soup, you also consume the chemical energy it contains.
Thus, the answer is chemical energy.
For more details regarding chemical energy, visit:
https://brainly.com/question/30288262
#SPJ2
What kind of force could cause this ball to not be at rest anymore, or cause it to move?
Answer:
friction
Explanation
Answer:
Friction
Explanation:
What force prevents an object at rest?
Sliding Friction While static friction keeps an object at rest, sliding friction slows down an object that slides. If you push an object across a room, you notice the sliding friction between the bottom of the object and the floor. You have to keep pushing to overcome the force of sliding friction.
a girl on a bridge throws a rock straight down at -12.5 m/s. it hits the ground 38.4 m below. How much time did it take?
The acceleration of both the rocks is only due to the gravitational force acting on them. Even though the speed of thrown rock would be greater than that of dropped rock, the acceleration of both the rocks would be g downwards.
Answer:
1.80
Explanation:
38.4=-12.5(a)-1/2(-9.80)(a)^2
a= acceleration
^2 is the exponent
Déterminer la charge de noyau d’atome d’oxygène en coulomb C
Answer:
determine a large mam I have no idea
what tool had allowed scientists to learn about the characteristics of eaths layers???
Answer:
seismic waves
Explanation:
i think thats the answer
1. if the work done to move a box to a distance of 6 metres equals 120 joules. calculate the force
2. Calculate the potential energy of a book with a mass of 1.5 kg placed on top of a shelf with a height of 2 m.
(Knowing that the acceleration due to gravity = 10 m/s2
).
3. What is meant by?
The potential energy of an object = 20 joules.
Explanation:
1. W = F x D
F = W/D
F = 120/6 = 20Newton
2. P. E = mgh
P. E = 1.5x10x2 = 30Joules
3. It means that the energy the body possesses at that point is 20Joules
if acceleration due to gravity is 10m/s², what will be the potential energy of a body of mass 2 kg kept at a height of 5 meter ?
Answer:
50J
Explanation:
Ep = mgh
Here,
m = 1kg; g = 10 m/s2; h = 5m
So, Ep = 1kg*10m/s2*5m
= 50J
So, the potential energy is 50J (Ans).
Guys plz i need those answers as soon as possible
9) a) formula = h(ρ)g by default g=9.8m/s²
Pressure = 2×1000×9.8 = 19600Pa
b)
Bijan wanted to find the density of a piece of metal. He weighed it. Them he measured its volume by placing it in measuring cylinder which was half-full of water. Here are his measurements: Mass of metal - 196.0 g, reading on measuring cylinder (water only) = 45 cm3 and reading on measuring cylinder (water + metal) = 68 cm3. What is the density of the piece of metal?
If an object is rolling without slipping, how is the speed of its center related to its angular velocity
Speed of its center will be directly proportional to its angular velocity in the case of rolling without slipping
What is rolling without slipping ?
Rolling without slipping is a combination of translation and rotation where the point contact is instantaneously at rest.
When an object rolls without slipping on an inclined plane , then the velocity of the center of mass will be equal to angular velocity times radius that object.
Vo = angular velocity * radius
Learn more about rolling without slipping
https://brainly.com/question/17328374?referrer=searchResults
#SPJ2
Each box weighs 10lb. The coefficient of static friction between box A and box B is 0.24, and the coefficient of static friction between box B and the inclined surface is 0.3. What is the largest angle for which box B will not slip
The largest angle for which box B will not slip is 16.7⁰.
The given parameters:
weight of box, W = 10 lbcoefficient of static friction between box A and box B, [tex]\mu_s_1[/tex] = 0.24coefficient of static friction between box B and the inclined surface, [tex]\mu_s_2[/tex] = 0.3The frictional force between box A and box B is calculated as;
[tex]F_f_1= \mu_s_1 (mg)[/tex]
The frictional force between box B and inclined surface is calculated as;
[tex]F_f = \mu_s_2 (2mg) cos(\theta)[/tex]
The net force on the boxes that results in no movement is calculated as;
[tex](2mg) sin(\theta) - F_f= 0\\\\(2mg) sin(\theta) = F_f\\\\(2mg) sin(\theta) = \ \mu_s_2 (2mg) cos(\theta)\\\\ sin(\theta) = \mu_s_2 cos(\theta)\\\\\mu_s_2 = \frac{sin(\theta)}{cos(\theta)} \\\\\mu_s_2 = tan(\theta)\\\\\theta = tan^{-1} (\mu_s_2)\\\\\theta = tan^{-1} (0.3)\\\\\theta = 16.7 \ ^ 0[/tex]
Thus, the largest angle for which box B will not slip is 16.7⁰.
Learn more about coefficient of static friction here: https://brainly.com/question/25050131
Prove that the two equations shown below are equivalent.
F = ma and F = p/t
Newton’s Second Law of Motion is defined as Force is equal to the rate of change of momentum. For a constant mass, force equals mass times acceleration.
[tex]\Delta p = mv - mu \\\\\implies \Delta p = m(v-u) \\\\F = \dfrac{\Delta p}{\Delta t} = \dfrac{m(v-u)}{\Delta t} = ma[/tex]
F = ma is the formula of Newton’s Second Law of Motion.
To prove Newton's second law of motion,
Given Force F = Δp/Δt
What is relation between F = ma and F = Δp/Δt?Newton’s Second Law of Motion is defined as Force is equal to the rate of change of momentum. The second law of Newton can be described as the acceleration of an object which produces a net force is directly proportional to the magnitude of the net force, in the same path i.e., direction as the net force, and inversely proportional to the mass of the object.As the acceleration has its magnitude and direction it is a vector quantity.Proof for F=ma
Let us consider an object of mass m, moving along a straight line with an initial velocity u, final velocity v and it has some particular time t and thus Momentum can be related as,
For initial velocity u, p1 = m × u
The final velocity v, p2 = m × v
The change in momentum can be expressed as
p2 – p1 = (m × v) – (m × u)
p2 – p1 = m (v – u)
Here, we know that the rate of change of momentum with respect to time is proportional to the applied force.
The applied force F,
F ∝ [m (v – u)]/t
F ∝ m × a
As acceleration (a) is the rate of change of velocity with respect to time.
F = k × m × a
F = ma
where k can be the constant.
Learn more about Newton's second law,
https://brainly.com/question/13447525
#SPJ2
Which wave has the longest wavelength?
Answer:
A Wave red
Explanation:
Answer:
Answer: Wave E
Explanation:
Why because if you put each in a strait line it would have been longer
hope it helps
PLEASE HELP!!!!!
How does the law of conservation of energy apply to an object rolling down different surfaces?
Answer:
it states that energy can either be gained or lost but it only changes its form.
Explanation:
for example:as a ball is still on the table it posses a potential energy of 100j and a k.e of 0j,as it falls it gains k.e so the midpoint the p.e is equal to the k.e (50j equally) as it approches the ground it completely gains k.e (100j) and the p.e is 0j.
total energy is 100j so it has been converted from p.e to k.e.
hope u have understood.
Estimate under what set of conditions it is possible, despite the spherical shape of the working electrode, to use linear diffusion equations to theoretically predict the current vs voltage curve expected in this experiment.
When the experimental measurements diverge at very low values of the voltages. When the ratio of current to saturated current is very small. That is, i/I less than or equal to 1/100. When there is a finite current at Voltage
V = 0
Diffusion will have influence on current - voltage curve in the working electrode which is ionization detector.
The estimation under set of conditions that is possible, despite the spherical shape of the working electrode, to use linear diffusion equations to theoretically predict the current vs voltage curve expected in this experiment will be:
When the experimental measurements diverge at very low values of the voltageswhen the ratio of current to saturated current is very small. That is, i/I less than or equal to 1/100When there is a finite current at Voltage V = 0Where
i = electric current
I = saturated current
V = voltage supplied
The curve expected will therefore give exponential curve from positive to negative domain because of the diffusion of ions from different directions
Learn more here: https://brainly.com/question/23985719
a girl runs once around a circular track with a radius of 100m at speed of 10m/s.
calculate her displacement
Answer:
0 m
Explanation:
Displacement is the shortest distance from one ppont to another. Here, the girl returns to the same spot after running. Hence, displacement is 0 m.
This should be pretty easy i think.
Describe the components within the system involved in the collision between pilot and landing zone.
Answer:
its a sure for not but i think its a 192583
A scientist fills a container with sea water. The container has dimensions 30 cm x 30 cm x 40 cm The density of sea water is 1020 kg/mº. Calculate the mass of the sea water in the container.
Answer:
30600kg
Explanation:
density=m/v make v subject of the formula
two objects are sitting 6m apart, one object has a mass of 100kg and the other has a mass of 200kg. what is the gravitational attraction between them
Hi all, can u please help me in this. I would very appreciate it :)
Write four questions and below the answers about water and air resistance.
Questions And Answers About Air Resistance.
Question 1: What is Air resistance?
Answer: Air resistance is a force that is caused by air. The force acts in the opposite direction to an object moving through the air. A lorry with a flat front will experience high air resistance while a sports car with a streamlined shape will experience lower air resistance, allowing the car to go faster.
Question 2: What causes air resistance?
Answer: Air resistance, also known as drag, is a force that is caused by air, the force acts in the opposite direction to an object moving through the air. It is where air particles hit the front of the object slowing it down. The more surface area, the more air particles hit it and the greater the resistance.
Question 3: How can air resistance be overcome?
Answer: Two ways to reduce air resistance are stated: reducing the area in contact with air (by the cyclist ducking down or cycling behind someone else) and by being more streamlined (wearing smoother surfaces or a more streamlined helmet).
Question 4: What happens when air resistance increases?
Answer: As it gains speed, the object's weight stays the same but the air resistance on it increases. There is a resultant force acting downwards. Eventually, the object's weight is balanced by the air resistance. There is no resultant force and the object reaches a steady speed – this is known as the terminal velocity.
Questions And Answers About Water Resistance.
Question 1: What is Water resistance?
Answer: Water resistance is a type of force that uses friction to slow things down that are moving through water. ... Water resistance occurs because of the particles in the liquid. As an object moves through a liquid, it collides with the particles which cause it to slow down.
Question 2: What causes water resistance?
Answer: Water resistance doesn't have to be just water, however, it can happen to objects moving through any type of fluid. Water-resistance happens because of the particles in water or the fluid. As the object moved through it collides with the particles which try to slow it down.
Question 3: How is water resistance useful?
Answer: Like friction and air resistance, it SLOWS THINGS DOWN, trying to stop them from moving. Water resistance can also be useful at times. When you are swimming and you push against the water with your hands, the water-resistance pushes back and helps you to move forward. This also happens when you use oars to row a boat.
Question 4: Does water-resistant mean waterproof?
Answer: The technical definition of water-resistant is that it's able to resist the penetration of water to a certain degree, but not entirely. Waterproof technically means that it's impermeable to water, no matter how much time it spends in the water.
Hope This Helps...:)
NO LINKS! What are the definitions of initial horizontal velocity and initial vertical velocity? Please help! This like is my 10th time asking this question because many people have been scamming me...
Answer:
Additionally, the initial horizontal velocity may be calculated by measuring the diameter d of the ball and dividing the result by the amount of time t required for the ball to pass across the photogate. Vo = d/t is the formula.
Initial vertical velocity is the vertical component of the initial velocity: v 0 y = sin 0 sin 0 = (30.0 m/s) sin 45° = 21.2 m/s
Explanation:
Hope it helps:)
How far from the center of the earth is the center of mass of the earth moon system?.
Answer:
With a typical distance of 384,400 kilometers separating Earth and the moon's centers, that works out to a center of mass that is roughly 379,700 kilometers from the moon's center and about 4,700 kilometers from Earth's. Explanation:
