Glacial acetic acid is a hazardous chemical that is carcinogenic, flammable, corrosive, and poses health and environmental hazards.
Glacial acetic acid is a clear, colorless, corrosive liquid that can cause severe burns and eye damage upon contact. It is also highly flammable and can pose a fire hazard. Additionally, glacial acetic acid is a known carcinogen, meaning it can cause cancer, and it is harmful if ingested or inhaled. When released into the environment, it can contaminate water and soil, potentially causing harm to aquatic life and plants.
It is important to handle glacial acetic acid with extreme care, using appropriate protective equipment and following proper disposal protocols. In case of accidental exposure, seek immediate medical attention. Proper training and awareness of the risks associated with this chemical can help prevent accidents and ensure a safe workplace.
Learn more about carcinogen here:
https://brainly.com/question/29422741
#SPJ11
upon combustion, a compound containing only carbon and hydrogen produced 1.60 g of co2 and 0.819 g of h2o. what is the empirical formula of the compound ?
The empirical formula of the compound containing only carbon and hydrogen is C2H5.
To determine the empirical formula of the compound, we need to find the ratios of the elements in the compound.
First, we need to convert the given masses of CO2 and H2O into moles. The molar mass of CO2 is 44.01 g/mol, so 1.60 g of CO2 is 1.60/44.01 = 0.0364 moles. The molar mass of H2O is 18.02 g/mol, so 0.819 g of H2O is 0.819/18.02 = 0.0454 moles.
Next, we need to use the mole ratios of CO2 and H2O to determine the mole ratios of carbon and hydrogen in the compound. Each mole of CO2 contains one mole of carbon, so there are 0.0364 moles of carbon in the compound. Each mole of H2O contains two moles of hydrogen, so there are 0.0908 moles of hydrogen in the compound (0.0454 moles x 2).
Finally, we can find the empirical formula by dividing the number of moles of each element by the smallest number of moles. In this case, the smallest number of moles is 0.0364 moles of carbon. Dividing 0.0364 moles of carbon by 0.0364 gives us 1, and dividing 0.0908 moles of hydrogen by 0.0364 gives us 2.5. Since we can't have a fraction in a formula, we need to multiply everything by 2 to get whole numbers. Therefore, the empirical formula of the compound is C2H5.
In conclusion, the empirical formula of the compound containing only carbon and hydrogen is C2H5.
To know more about empirical formula visit:
https://brainly.com/question/14044066
#SPJ11
For many, the point of paying attention to diet and exercise is to lose weight. However, in many cases, people will not see the kinds of dramatic changes in their weight that they are looking for due to body composition and other factors. Why should they still stick to these changes?
For many, the point of paying attention to diet and exercise is to lose weight. However, in many cases, people will not see the kinds of dramatic changes in their weight that they are looking for due to body composition and other factors. They should still stick to these changes to observe the remarkable result.
Maintaining physical and mental health and well-being requires a good, balanced diet and regular exercise. A healthier lifestyle is linked to better sleep and happiness in addition to being useful in preventing excessive weight gain or maintaining weight loss. For many, the point of paying attention to diet and exercise is to lose weight. However, in many cases, people will not see the kinds of dramatic changes in their weight that they are looking for due to body composition and other factors. They should still stick to these changes to observe the remarkable result.
To know more about health, here:
https://brainly.in/question/17338646
#SPJ1
Complete the following acid-base reaction by drawing the major organic product(s). CH3CH2CH2CH2LI + CH3COOH ----->
The major organic product of the acid-base reaction between CH₃CH₂CH₂CH₂Li and CH₃COOH is CH₃CH₂CH₂CH₂COOH, also known as pentanoic acid.
In this reaction, the CH₃CH₂CH₂CH₂Li compound acts as a strong base, and it reacts with the acidic proton of CH₃COOH to form a carboxylic acid. The organic product formed is a carboxylic acid with one additional carbon atom compared to the starting material. The reaction follows the general equation:
R-Li + R'-COOH → R-COOH + R'-Li
The product, pentanoic acid, is a straight-chain saturated fatty acid with a five-carbon chain and a carboxyl group at the end of the chain. Pentanoic acid is a colorless, oily liquid that is soluble in water and has a strong, unpleasant odor. It is commonly used in the synthesis of pharmaceuticals, fragrances, and flavors.
To know more about pentanoic acid, refer here:
https://brainly.com/question/16945257#
#SPJ11
If the potential energy of a football when hit is 80J, what will its mass in grams be if it reaches a height of 40 meters?
Answer: If the potential energy of a football when hit is 80J, what will its mass in grams be if it reaches a height of 40 meters?
Explanation:
We can use the formula for gravitational potential energy:
PE = mgh
where PE is the potential energy, m is the mass, g is the acceleration due to gravity, and h is the height.
We can rearrange this formula to solve for the mass:
m = PE / gh
Plugging in the given values, we get:
m = 80 J / (9.81 m/s^2 * 40 m)
Simplifying, we get:
m = 0.204 kg
To convert this to grams, we multiply by 1000:
m = 204 g
Therefore, the mass of the football is 204 grams if it reaches a height of 40 meters with a potential energy of 80 J.
{I Hope This Helps! :)}
the following (fake) chemical equation is not balanced: ad2 r3 → a2r2 d. after balancing, this chemical equation is _____.
The given chemical equation, ad2 r3 → a2r2 d, is not balanced because the number of atoms of each element is not the same on both sides of the equation.
The first step in balancing the equation is to count the number of atoms of each element on both sides and identify which elements are not balanced.
On the left side, we have two atoms of A, two atoms of D, and three atoms of R. On the right side, we have two atoms of A, two atoms of D, and two atoms of R.
To balance the equation, we need to adjust the coefficients of the reactants and products to ensure that the same number of atoms of each element appears on both sides of the equation.
By adjusting the coefficients, we can balance the equation as follows: 2AD2R3 → 2A2R2D.
After balancing, the number of atoms of each element is the same on both sides, with two atoms of A, two atoms of D, and two atoms of R on both sides.
This balanced chemical equation shows that two molecules of AD2R3 react to form two molecules of A2R2D. Balancing chemical equations is an important step in chemical reactions, as it ensures that the law of conservation of mass is maintained.
To know more about chemical equation refer here
brainly.com/question/20492533#
#SPJ11
for an isotope with a half-life of one day, at the end of three days the amount that remains is
After three days, the amount of the isotope that remains would be 12.5%. It's worth noting that the half-life of an isotope determines how quickly it decays and can be used to calculate the remaining amount at any given time.
Assuming the initial amount of the isotope is 100%, at the end of one day, half of it would have decayed, leaving 50% of the initial amount. At the end of the second day, half of the remaining 50% would have decayed, leaving 25% of the initial amount. Finally, at the end of the third day, half of the remaining 25% would have decayed, leaving only 12.5% of the initial amount.
Therefore, after three days, the amount of the isotope that remains would be 12.5%. It's worth noting that the half-life of an isotope determines how quickly it decays and can be used to calculate the remaining amount at any given time.
An isotope with a half-life of one day means that half of its initial amount will decay in a day. After three days, the isotope will undergo three half-life cycles. On the first day, 50% remains. On the second day, half of the remaining 50% decays, leaving 25%. Finally, on the third day, half of the remaining 25% decays, leaving 12.5%. Thus, at the end of three days, 12.5% of the original isotope amount remains.
To know about isotope visit:
https://brainly.com/question/28039996
#SPJ11
Categorize each phrase or term as applying to Voges-Proskauer, methyl red, or catalase testing. Aerobic respiration Voges-Proskauer Methyl Red Catalase Barritt's reagents Butanediol fermentation Low pH :Mixed- acid fermentation : Peroxide
The categorization is
Voges-Proskauer: Butanediol fermentation, Barritt's reagents
Methyl Red: Mixed-acid fermentation, Low pH
Catalase: Peroxide, Aerobic respiration
Voges-Proskauer (VP) test is used to detect the production of acetoin, a metabolic intermediate in butanediol fermentation. The VP test involves the addition of Barritt's reagents, which contain alpha-naphthol and potassium hydroxide, to the bacterial culture. If acetoin is present, a red color develops, indicating a positive VP test.
Methyl Red (MR) test is used to determine if an organism carries out mixed-acid fermentation. In this test, the pH of the medium is lowered, and if the bacteria produce large amounts of stable acid products, the pH remains low, resulting in a positive MR test.
Catalase testing is used to determine the presence of the enzyme catalase, which catalyzes the breakdown of hydrogen peroxide into water and oxygen. Catalase is produced in organisms that carry out aerobic respiration, which uses oxygen as the final electron acceptor.
To know more about methyl-red: https://brainly.com/question/32153999
#SPJ11
Does a change in the molality cause the boiling point of a solution to increase or decrease?.
Yes, a change in the molality causes the boiling point of a solution to increase. Molality refers to the number of moles of solute present in a kilogram of solvent. It's important to note that when solute particles are added to a solvent, the solution's boiling point increases and the freezing point decreases.
There is a direct relationship between the molality of a solution and its boiling point. When a solute is dissolved in a solvent, the solution's boiling point increases. The solute particles have a greater influence on the solution's properties than the solvent particles, which results in an increase in the solution's boiling point.
The boiling point of a solution is greater than that of the pure solvent due to the presence of a solute. As a result, the boiling point of a solution can be used to determine the solute's molecular weight. The difference between the boiling points of a pure solvent and a solution of the same solvent and solute is proportional to the solute's molality.
To know more about molality visit:
https://brainly.com/question/30640726
#SPJ11
what would happen if voltage-gated na ion channels needed greater hyperpolarization than normal to deinactivate.
If voltage-gated Na ion channels needed greater hyperpolarization than normal to deinactivate, it would result in delayed action potentials and slower nerve impulses.
Voltage-gated Na ion channels are responsible for the depolarization phase of the action potential. They open in response to depolarization, allowing an influx of Na ions into the cell. After a brief period, these channels deinactivate, preventing further influx of Na ions. If these channels required greater hyperpolarization than normal to deinactivate, it would result in delayed action potentials and slower nerve impulses.
This is because the cell membrane would need to become more negative than usual to close the Na channels, slowing down the depolarization and repolarization phases of the action potential. Ultimately, this could lead to neurological disorders such as epilepsy or paralysis. However, the exact consequences would depend on the specific context and severity of the dysfunction.
Learn more about hyperpolarization here:
https://brainly.com/question/4179968
#SPJ11
The reactant concentration in a first-order reaction was 9.20×10−2M after 30.0s and 7.80×10−3M after 85.0s . What is the rate constant for this reaction?
Express your answer with the appropriate units.
The rate constant for this reaction is 0.0488 s^-1. To find the rate constant for a first-order reaction, we use the equation: ln([A]t/[A]0) = -kt, where [A]t is the concentration at time t, [A]0 is the initial concentration, k is the rate constant, and t is time.
Using the given concentrations, we can plug them into the equation:
ln(7.80x10^-3M/9.20x10^-2M) = -k(85.0s - 30.0s)
Simplifying and solving for k, we get:
k = (ln(9.20x10^-2M/7.80x10^-3M))/(85.0s - 30.0s)
k = 0.0488 s^-1
Therefore, the rate constant for this reaction is 0.0488 s^-1.
learn more about the reaction here
https://brainly.com/question/30464598
#SPJ11
If the mass of copper(II) sulfate crystals produced was 4.6 g, calculate the % yield of this reaction.
question e
To calculate the percentage, we need a balanced chemical equation for the reaction. However, assuming a hypothetical reaction, the balanced equation is:
Cu H2SO4 -> CuSO4 H2
If the mass of copper (II) sulfate crystals formed is 4.6 g, we must determine the theoretical yield. We can calculate the molar mass of CuSO4 (which is 159.6 g/mol) and use that mass to convert to moles. We then compare the actual return to the theoretical return:
Percentage Return = (Actual Return / Theoretical Return) × 100
Without a specific reaction, we cannot calculate the exact percentage yield. Therefore, enter a balanced chemical equation for a more accurate calculation.
Learn more about copper at :
https://brainly.com/question/13102529
#SPJ1
photons of which of the following colors of light possess the greatest amount of energy?
Photons of light with shorter wavelengths, such as violet or blue light, possess the greatest amount of energy.
The energy of a photon is directly proportional to its frequency and inversely proportional to its wavelength.
Since frequency and wavelength are inversely related, photons with shorter wavelengths have higher frequencies and therefore more energy.
Therefore, violet or blue light, which have the shortest wavelengths of visible light, possess the greatest amount of energy. Conversely, photons of light with longer wavelengths, such as red or orange light, have less energy.
This relationship between wavelength and energy is important in fields such as optics, spectroscopy, and quantum mechanics.
Visit here to learn more about Energy:
brainly.com/question/13881533
#SPJ11
mixtures are divided into two classes based on their appearance. what are these two classes?
The two classes of mixtures based on their appearance are homogeneous mixtures and heterogeneous mixtures.
Homogeneous mixtures are uniform throughout and have the same composition and properties in all parts of the mixture. Examples include saltwater and air. Heterogeneous mixtures, on the other hand, have visibly different parts and are not uniform throughout. The composition and properties of the mixture may vary from one part to another.
Examples include sand and water, oil and water, and a salad with different ingredients. The distinction between the two types of mixtures is important in chemistry and physics, as it affects how the mixture behaves and how it can be separated. Homogeneous mixtures have only one phase, while heterogeneous mixtures have multiple phases.
Separation of mixtures is often based on their appearance, with methods like filtration and decantation used to separate heterogeneous mixtures, while methods like distillation and chromatography are used for homogeneous mixtures.
Learn more about mixture here:
https://brainly.com/question/30587533
#SPJ11
a solution contains the label 0.2 m kno3. what is the correct interpretation of this concentration?
The label "0.2 M KNO3" indicates that the solution contains potassium nitrate (KNO3) at a concentration of 0.2 moles per liter (M).
In chemistry, molarity (M) is a unit of concentration that expresses the number of moles of a solute dissolved in one liter of a solution. A mole is a unit of measurement used to express the amount of a substance, and is defined as the amount of a substance that contains the same number of entities (such as atoms, molecules, or ions) as there are in 12 grams of carbon-12.
So, in this case, a solution with a concentration of 0.2 M KNO3 contains 0.2 moles of KNO3 dissolved in one liter of solution. It is important to note that molarity is temperature-dependent and may change with changes in temperature, so it is important to specify the temperature at which the measurement was taken.
Learn more about potassium here:
https://brainly.com/question/13321031
#SPJ11
For each action, consider the change in pressures and ignore any change in temperature. Does the density of the object increase, decrease, or remain the same?
A balloon full of helium rises 1000 feet.
a) density of helium decreases
b) density of helium stays the same
c) density of helium increases
When a balloon full of helium rises 1000 feet, the atmospheric pressure decreases as altitude increases. This means that the pressure inside the balloon will be greater than the pressure outside the balloon. As a result, the helium molecules will spread out and expand to fill the available space.
According to the ideal gas law, PV = nRT, the pressure (P) and volume (V) of a gas are inversely proportional to each other, assuming constant temperature (T) and number of molecules (n). This means that as the pressure inside the balloon decreases, the volume of the balloon will increase, causing the density of the helium to decrease.
The density of helium decreases. As the balloon rises, the atmospheric pressure decreases. The decrease in pressure allows the helium inside the balloon to expand, which results in a decrease in the density of the helium.
To know more about pressure visit:-
https://brainly.com/question/20330261
#SPJ11
narcoleptic patients have brains with reduced levels of
Narcoleptic patients have reduced levels of hypocretin/orexin in their brains.
Narcolepsy is a neurological disorder that affects the ability to regulate sleep-wake cycles. One of the main symptoms of narcolepsy is excessive daytime sleepiness, which can be debilitating for those affected.
Research has shown that people with narcolepsy have significantly lower levels of a neurotransmitter called hypocretin (also known as orexin) in their brains.
Hypocretin is produced by cells in a part of the brain called the hypothalamus, and it plays a critical role in regulating sleep and wakefulness.
The exact cause of the loss of hypocretin-producing cells in people with narcolepsy is not fully understood, but it is thought to involve an autoimmune reaction that damages these cells.
Visit here to learn more about Narcoleptic:
brainly.com/question/29845378
#SPJ11
an element crystallizes in a face-centered cubic lattice. if the length of an edge of the unit cell is 0.352 nm, and the density of the element is 8.90 g/cm3 , what is the identity of the element?
The element with a molar mass closest to 58.67 g/mol is nickel (Ni), which has a molar mass of 58.69 g/mol. Therefore, the element is nickel.
To identify the element, we'll first calculate the molar mass. In a face-centered cubic lattice, there are 4 atoms per unit cell. The unit cell volume can be calculated as V = (0.352 nm)^3 = 4.37 x 10^-23 cm^3. Given the density, we can find the mass of the unit cell: mass = density x volume = 8.90 g/cm^3 x 4.37 x 10^-23 cm^3 = 3.89 x 10^-22 g.
Now, we can determine the molar mass: molar mass = (mass of unit cell) / (number of atoms per unit cell) x Avogadro's number = (3.89 x 10^-22 g) / 4 x 6.022 x 10^23 = 58.67 g/mol.
The element with a molar mass closest to 58.67 g/mol is nickel (Ni), which has a molar mass of 58.69 g/mol. Therefore, the element is nickel.
To know about lattice:
https://brainly.com/question/31670105
#SPJ11
the prefixes gluc/o and glyc/o both refer to _____ or sugar.
The prefixes gluc/o and glyc/o both refer to sugar.
The explanation for this is that both prefixes are derived from the Greek word "glykys," which means sweet. Gluc/o is typically used to refer to glucose, which is a simple sugar that is the primary source of energy for the body.
Glyc/o is a more general term that can refer to any type of sugar, including complex carbohydrates like starches.
To know more about sugar visit :-
https://brainly.com/question/542580
#SPJ11
The prefixes gluc/o and glyc/o both refer to glucose or sugar.
Both prefixes are derived from the Greek word "glykys," which means sweet. Gluc/o is commonly used in scientific terminology, while glyc/o is often used in medical terminology.
In medical terminology, the prefixes gluc/o and glyc/o are used interchangeably to denote glucose, which is a simple sugar and an essential source of energy for living organisms. These prefixes are commonly used in words related to glucose metabolism and its related conditions, such as glycemia (blood sugar level) or glucagon (a hormone that raises blood sugar).
In summary, gluc/o and glyc/o are prefixes that represent glucose or sugar in medical terms, and they are used to describe various aspects of glucose metabolism and related conditions.
For more information on glucose kindly visit to
https://brainly.com/question/13555266
#SPJ11
At position A, which hemisphere would have winter?
Answer:
The east hemisphere.
Explanation:
Simply use a compass of sort to determine the hemisphere in the image.
North^ South v East > West <
We did an experiment where we had a black can and a silver can we put equal amounts of water in both, and had a heating lamp over both. Every fifteen minutes we measured the temperature
Why did the black can end up getting hotter?
The chemical experiments black can had a low albedo, absorbed more heat, and therefore ended up getting hotter than the silver can.
The black can ended up getting hotter because of its ability to absorb more heat than the silver can. The color of an object determines how much light it reflects or absorbs. The black can absorbs more light and thus more heat, whereas the silver can reflects more light and heat.
When the heating lamp is turned on, both cans are exposed to the same amount of light and heat. The black can absorbs more of the light and heat, and therefore heats up faster and to a higher temperature than the silver can.
The difference in temperature between the black can and the silver can can be attributed to a phenomenon called albedo. Albedo is the measure of an object's reflectivity or ability to reflect light. A high albedo means that an object reflects more light, whereas a low albedo means that an object absorbs more light.
In this experiment, the black can had a low albedo and absorbed more light and heat, whereas the silver can had a high albedo and reflected more light and heat. This explains why the black can ended up getting hotter than the silver can.
To learn more about chemical experiments, refer:
https://brainly.com/question/32063305
#SPJ1
it is determined that 1.75 moles of a compound weigh 308.2 g. the empirical formula of this compound is c3h4o3. what is its molecular formula?
To find the molecular formula of the compound, we need to know its molar mass. We can calculate the molar mass of the empirical formula C3H4O3 as follows:Molar mass of C3H4O3 = (3 x atomic mass of C) + (4 x atomic mass of H) + (3 x atomic mass of O)
= (3 x 12.01 g/mol) + (4 x 1.01 g/mol) + (3 x 16.00 g/mol)
= 72.06 g/mol
Next, we can calculate the empirical formula mass of C3H4O3:
Empirical formula mass of C3H4O3 = (3 x atomic mass of C) + (4 x atomic mass of H) + (3 x atomic mass of O)
= (3 x 12.01 g/mol) + (4 x 1.01 g/mol) + (3 x 16.00 g/mol)
= 72.06 g/mol
We can then use the molar mass and empirical formula mass to find the molecular formula:
Molecular formula = (Molar mass of the compound) / (Empirical formula mass of the compound)
Molecular formula = (308.2 g/mol) / (72.06 g/mol)
Molecular formula = 4.28
The molecular formula is not a whole number, so we need to multiply both the empirical formula and the molecular formula by a factor to obtain a whole number for the molecular formula. We can multiply the empirical formula by 2 to obtain the molecular formula:
Empirical formula x 2 = C6H8O6
Therefore, the molecular formula of the compound is C6H8O6.
To know more about molecular visit :
https://brainly.com/question/156574
#SPJ11
The molecular formula of the compound is C6H8O6. when the empirical formula of this compound is c3h4o3 and it is determined that 1.75 moles of a compound weigh 308.2 g.
The first step to finding the molecular formula is to calculate the empirical formula mass of C3H4O3, which is 88 g/mol. Next, divide the molar mass of the compound (308.2 g/1.75 mol) by the empirical formula mass to get the ratio of the molecular formula to the empirical formula. This gives us a ratio of 3.5. To get whole numbers, we can multiply both sides of the ratio by 2, giving us a molecular formula of C6H8O6. Therefore, the molecular formula of the compound is C6H8O6.
Hence, To find the molecular formula, first determine the molar mass of the empirical formula (C3H4O3): (3×12.01 g/mol) + (4×1.01 g/mol) + (3×16.00 g/mol) = 88.05 g/mol. Then, divide the given mass of the compound (308.2 g) by the moles (1.75 moles) to find the molar mass of the molecular formula: 308.2 g / 1.75 moles = 176.1 g/mol. Divide the molecular formula's molar mass by the empirical formula's molar mass: 176.1 g/mol / 88.05 g/mol = 2. Multiply the empirical formula by this factor (2) to get the molecular formula: C6H8O6.
To know more about compound visit
https://brainly.com/question/32127040
#SPJ11
Of the following real gases, which would be expected to have the lowest van der Waals correction for intermolecular attractions?
A)
H2
B)
Cl2
C)
NH3
D)
O2
E)
not enough information to determine
The expected answer would be A) H2 and D) O2. The van der Waals correction for intermolecular attractions is related to the size of the molecules and their polarity. The larger the molecule, the stronger the van der Waals forces between them, and therefore the higher the correction.
Additionally, polar molecules tend to have stronger van der Waals forces compared to nonpolar molecules.
Based on this information, we can predict that H2 and O2, which are both small nonpolar molecules, would have the lowest van der Waals correction for intermolecular attractions. Cl2, on the other hand, is a larger nonpolar molecule, so it would have a higher correction.
NH3, despite being smaller than Cl2, is polar and therefore would have a higher correction due to stronger van der Waals forces. This is because van der Waals corrections account for two factors: the size of the gas particles and the strength of the intermolecular forces. In this case, we are looking for the gas with the weakest intermolecular forces.
To know more about intermolecular attractions visit:-
https://brainly.com/question/30425720
#SPJ11
The number of sub levels within each energy level of an atom is equal to the value of the...
a. principal quantum number
b. angular momentum quantum number
c. magnetic quantum number
d. spin quantum number
The number of sub levels within each energy level of an atom is equal to the value of the principal quantum number. The correct option is (a) principal quantum number.
The principal quantum number, also known as the energy level, determines the overall energy of an electron within an atom.
Each energy level can contain one or more sub-levels, which are identified by the angular momentum quantum number (l). The value of l can range from 0 to n-1, where n is the principal quantum number.
Each sub-level can further be broken down into orbitals, which are identified by the magnetic quantum number (m). The spin quantum number (s) determines the spin of the electron within an orbital.
Therefore, the principal quantum number determines the number of sub-levels within each energy level of an atom.
Visit here to learn more about Atom:
brainly.com/question/17545314
#SPJ11
chromium metal crystallizes as a body-centered cubic lattice. if the atomic radius of cr is 1.25 angstroms, what is the density of cr metal in grams per cubic centimeter?
The density of chromium metal is (2 atoms x 52.00 g/mol) / (1.5625 x 10^-23 cm^3) = 6.99 g/cm^3.The body-centered cubic lattice has an atom at each corner of the cube and one in the center, making a total of 2 atoms per unit cell.
The edge length of the cube can be calculated using the atomic radius, which is 2 times the radius of an atom. Therefore, the edge length (a) is 2.5 angstroms. The volume of the unit cell can be calculated as a^3, which is 15.625 cubic angstroms. To convert this to cubic centimeters, we need to divide by 10^24. Therefore, the volume of the unit cell is 1.5625 x 10^-23 cm^3. The atomic weight of chromium is 52.00 g/mol. Hence, the density of chromium metal is (2 atoms x 52.00 g/mol) / (1.5625 x 10^-23 cm^3) = 6.99 g/cm^3.
To learn more about lattice here
https://brainly.com/question/31670105
#SPJ11
The molar mass of NH3 is 17.03 g/mol. How many moles of NH3 are present in 107.1 g?
a. 0.1623 mol b. 3.614 mol c. 107.1 mol
d. 6.289 mol
Answer:D. 6.289
Explanation:
which of the following substances should you expect to be more soluble in benzene than in water? Select all that apply.
a. HCl
b. CS2
c. C3H8
d. I2
Both CS2 and I2 should be more soluble in benzene than in water.
Benzene is a nonpolar solvent, while water is a polar solvent. Nonpolar solutes tend to dissolve in nonpolar solvents, while polar solutes tend to dissolve in polar solvents.
HCl is a polar compound, and C3H8 is a nonpolar compound, but they both contain hydrogen bonding. Hydrogen bonding occurs when H is bonded to an electronegative atom such as N, O, or F.
This bonding leads to the formation of a dipole and polarity in the compound, making it soluble in water, not in benzene. CS2 and I2 are both nonpolar compounds and therefore should be more soluble in benzene than in water.
CS2 is a nonpolar compound with symmetrical bonding and zero dipole moment. It has a linear structure that allows it to have uniform electron density and distribution, making it more soluble in benzene, a nonpolar solvent.
I2 is also nonpolar with a symmetrical structure, and it is less polarizable than other halogens, which means it does not easily form polar bonds. This makes it more soluble in benzene than in water, a polar solvent.
Visit here to learn more about Electron:
brainly.com/question/30010470
#SPJ11
Four identical 1.0-L flasks contain the gases He, Cl2, CH4, and NH3, each at 0°C and 1 atm pressure.
46. Which gas has the highest density?
A)
He
B)
Cl2
C)
CH4
D)
NH3
E)
all gases the same
The gas with the highest density among He, Cl2, CH4, and NH3 at 0°C and 1 atm pressure is Cl2 (B).
To determine the density of each gas, we can use the equation:
Density = (mass) / (volume)
Since all the flasks have the same volume (1.0 L) and are at the same temperature and pressure, we can compare their densities based on their molar masses. Here are the molar masses of the given gases:
- He: 4 g/mol
- Cl2: 70 g/mol (35 g/mol * 2, as Cl2 is diatomic)
- CH4: 16 g/mol (12 g/mol for C and 1 g/mol * 4 for H)
- NH3: 17 g/mol (14 g/mol for N and 1 g/mol * 3 for H)
As we can see, Cl2 has the highest molar mass, and consequently, the highest density among the given gases.
To know more about Highest density visit:
https://brainly.com/question/30544850
#SPJ11
in a mixture of gases, there are 1.5 moles of argon, 2.0 moles of neon and 0.5 moles of helium. if the total pressure of the gas mixture is 760 mmhg, what is the partial pressure of argon?
The partial pressure of argon in the gas mixture is 285 mmHg.To calculate the partial pressure of argon, we need to use the mole fraction of argon in the gas mixture.
The mole fraction is the number of moles of a gas divided by the total number of moles in the mixture.
The total number of moles in the mixture is 1.5 + 2.0 + 0.5 = 4.0 moles.
The mole fraction of argon is therefore 1.5/4.0 = 0.375.
To find the partial pressure of argon, we multiply the mole fraction by the total pressure of the gas mixture:
Partial pressure of argon = 0.375 x 760 mmHg = 285 mmHg
Therefore, the partial pressure of argon in the gas mixture is 285 mmHg.
To know about argon visit:
https://brainly.com/question/12032224
#SPJ11
after the reduction of the ketone, what do you add to destroy the excess borohydride? hexanes water/hcl phenoxide ion ethanol acetic anhydride
After the reduction of the ketone using borohydride, you need to add an acidic solution such as water/HCl to destroy the excess borohydride.
This is because borohydride is a strong reducing agent and can react with other functional groups in the reaction mixture. The acidic solution protonates the borohydride ion, forming hydrogen gas and borate ions, which are soluble and can be easily removed from the reaction mixture.
Adding other reagents such as hexanes, phenoxide ion, ethanol or acetic anhydride would not effectively destroy the excess borohydride and could lead to unwanted side reactions.
To know more about reaction visit:
https://brainly.com/question/11231920
#SPJ11
a first-order reaction has a rate constant of 3.6 x 10^-3. how many seconds does it take for the reaction to be 43.6% complete?
A first-order reaction has a rate constant it would take approximately 536 seconds for the reaction to be 43.6% complete.
The integrated rate law for a first-order reaction is:
ln([A]t/[A]0) = -kt
where [A]t is the concentration of reactant at time t, [A]0 is the initial concentration of reactant, k is the rate constant, and t is time.
To find the time required for the reaction to be 43.6% complete, we can rearrange the integrated rate law:
ln([A]t/[A]0) = -kt
ln(0.436/[A]0) = -3.6 x 10^-3 s^-1 * t
Solving for t:
t = -ln(0.436/[A]0) / (3.6 x 10^-3 s^-1)
Assuming [A]0 = [A]t (i.e., the reaction is starting with 100% of the reactant), we have:
t = -ln(0.436) / (3.6 x 10^-3 s^-1)
t = 536 seconds (rounded to three significant figures)
Therefore, it would take approximately 536 seconds for the reaction to be 43.6% complete.
For more details regarding rate constant, visit:
https://brainly.com/question/31805239
#SPJ1
