why is the renewable energy resource you chose is negative?
Answer:
There’s a high need for energy storage and are very expensive. Renewable energy is also not always available because some need sun while others need wind.
Explanation:
What is the molarity of a NaCl solution with 3.7 moles and 2.3 L?*
Answer:
5.0 molatrity
Explanation:
because i just known
Answer:
Approximately 1.61
Explanation:
Molarity = Moles/Liters
Molariry = 3.7 moles NaCl / 2.3L
Molariry = 1.61
When there is unequal sharing between two atoms of the electrons in a bond, which
type of bond is it?
Answer:
polar covalent bond
Explanation:
physical science 6.06 part one
Answer:2 for 5, 6 for7
Explanation:
The government described in the passage most reflects the features of which type of democracy? No
The correct answer is B. Direct democracy
Explanation:
In a direct democracy, the citizens have a direct influence on government including laws, this means political decisions are made based on the opinion of citizens. This form of government differs from indirect democracy because in indirect democracy citizens only vote to choose representatives but do not participate directly in each political decision. The example presented is an example of direct democracy because even if some are not considered citizens, those who have the quality of "citizens" directly participate in the political decisions.
Mantle material rises in convection currents because heated materials become more dense.
True Or False
Answer:
True
Explanation:
Write a word equation and symbol equation (including state symbols)
for the reaction of calcium chloride with sodium hydroxide
Answer:
Explanation:
Calcium chloride reacts with NaOH to produce the Calcium hydroxide
CaCl2 + 2NaOH ----> 2NaCl + Ca(OH)2
Steel:
Propane:
Calcium chloride:
Water:
Answer:
Steel is a metallic bond
Propane is a covalent bond
Calcium Chloride is an Ionic Bond
Water is a covalent bond
Explanation:
ence a material's properties, identify each of the , ionic, covalent, or metallic bonds
Ionic Bonds are where the extra outer electron of one atom transfers to the other atom.
Covalent Bonds are where the outer electron of one atom takes the open path to the nucleus (negative valance) of a 2nd atom.
Metallic Bonds are formed from the attraction between free electrons and fixed positively charged metallic atoms. Metallic bonds extend over the entire molecular structure.
Substance Properties
Steel Conducts electricity as solid and liquid
Propane Low melting point
Calcium Chloride Conducts electricity when dissolved in water
Water Solid form is brittle, melts at 0C
Steel is an alloy of carbon, iron and other things
Propane = C3H8 C4- H+
Calcium Chloride = CaCl2 = Ca2+ Cl-
Water = H2O = OH- and H+
is Naci a metal or none metel
Answer:
Salt (NaCl) is an ionic bond that consists of Sodium (Na) which is a metal with positive charge combines with Chlorine (Cl), a nonmetal with a negative charge.
Explanation:
hi:) why do acids produce hydrogen ions in aqueous solution?
Answer:
An acid produces hydrogen ions in aqueous solution because it reacts with the water molecules by giving a proton to them.
Explanation:
When hydrogen chloride gas dissolves in water to produce hydrochloric acid, the hydrogen chloride molecule gives a proton (a hydrogen ion) to a water molecule.
Answer:
Acids produce hydrogen ions in aqueous solution because they have a higher concentration of hydrogen ions than hydroxyl ions and that's the reason too why they have a lower pH.
Hope this helps.
An electron is in a region outside the nucleus. An electron
a) Is larger than a proton and has no charge
b) Has less mass than a proton and has a negative charge
c) Is smaller than a proton and has no charge
d) Has a positive charge
Answer:
b
Explanation:
electrons lie in the orbits of the atom. they are negatively charged and they are very small in size. they have very less mass than proton. ele tron has 1/1840 mass of proton.
Ammonia (NH3) Is base.
How best do you describe Ammonia when dissolved in water
B. Ammonia forms a neutral solution.
C. Ammonia forms a buffered solution.
d. Ammonia acts as base because has OH- and makes water accepts hydrogen.
Answer:
Ammonia accepts a proton from water
Explanation:
Let us quickly remind ourselves of the Brownstead-Lowry definition of an acid. According to Brownstd-Lowry, an acid is any substance that donates hydrogen ions while a base is any substance that accepts hydrogen ions. The hydrogen ion is also known as a proton.
If we look at the behaviour of ammonia in water;
NH3(g) + H2O(l) ----> NH4^+(aq) + OH^-(aq)
We can easily see that ammonia accepts a proton from water (this makes it a Brownstd-Lowry base) and the hydroxide ion is formed in the process. Water functions as the proton donor here.
Which structural formula represents an isomer?
Answer: 4
Explanation: same amt of Hs Cs and Cls
The Option 4 has same number of atoms but arranged differently so it is the isomer of the given compound.
What is an Isomer ?Isomers are compounds that contain exactly the same number of atoms, i.e., they have exactly the same empirical formula, but differ from each other by the way in which the atoms are arranged.
By the definition of Isomer we can understand that we have to look for a compound that has same number of Carbon , Hydrogen and Chlorine atoms as that given .
Number of Carbon atoms = 3
Number of Hydrogen atoms = 6
Number of Chlorine atoms = 2
It can be seen that there are same number of Carbon , Hydrogen and Chlorine atoms in the fourth option , so Option 4 is the correct answer.
To know more about Isomer
https://brainly.com/question/13422357
#SPJ5
For the reaction NH4Cl (s)→NH3 (g) + HCl (g) at 25°C, ΔH = 176 kJ/moland ΔS = 0.285 kJ/(mol - K).
What is the ΔG, and will this reaction be spontaneous in the forward direction?
169 kJ/mol; no
-91 kJ/mol; yes
91 kJ/mol; no
91 kJ/mol; yes
Answer:
C: 91 kJ/mol; no
Explanation:
Just took the quiz! :)
The ΔG is 91kJ/mol and the reaction is not spontaneous in the forward direction and the correct option is option 3.
What is Gibbs free energy change?Gibbs free energy, also known as the Gibbs function, Gibbs energy, or free enthalpy, is a quantity that is used to measure the maximum amount of work done in a thermodynamic system when the temperature and pressure are kept constant.
The Gibbs free energy of the system is a state function because it is defined in terms of thermodynamic properties that are state functions.
The change in the Gibbs free energy of the system that occurs during a reaction is therefore equal to the change in the enthalpy of the system minus the change in the product of the temperature times the entropy of the system.
ΔG = ΔH - TΔS
Given,
ΔH = 176kJ/mol
ΔS = 0.285kJ/mol K
T = 25⁰C = 273 + 25 = 298K
ΔG = ΔH - TΔS
ΔG = 176000 - 298 × 285
= 91070 = 91 kJ/mol
Since ΔG is positive, the reaction is not spontaneous in the forward direction.
Therefore, the ΔG is 91kJ/mol and the reaction is not spontaneous in the forward direction and the correct option is option 3.
Learn more about Gibbs free energy change, here:
https://brainly.com/question/4002787
#SPJ3
Which of following is the most accurate description of a piston in an internal-
combustion engine?
A shaft that converts the up-and-down motion into a rotary motion
A plug that protrudes through the cylinder head and makes sparks that ignite the
air-and-fuel mixture
A can-shaped component that moves smoothly up and down and is the main
moving part
O A hollow metal tube drilled into the solid metal engine block
Answer:
A can-shaped component that moves smoothly up and down and is the main moving part
Explanation:
I chose the other answer that other person listed but got it wrong. This instead is the correct answer
Answer:
C. A can-shaped component that moves smoothly up and down and is the main
moving part
Explanation:
The piston is a can-shaped component that can move smoothly up and down inside the cylinder; it moves up to compress the air-and-fuel mixture and is pushed down when the spark plug ignites the mixture, which causes an explosion.
Determine the power of 900 joules of work done in 4 seconds
A) 3600 W
B) 225 W
C) 904 W
D) 450 W
Answer:
B. 225 W
Explanation:
Power is the measure of the amount of work done in a certain time frame. It can be found using the following formula.
p=w/t
where w is the amount of work done in joules and t is the amount of time in seconds.
We know that 900 joules of work was done in 4 seconds.
w=900 J
t= 4 s
Substitute these values into the formula.
p=900 J/ 4 s
Divide 900 by 4
900/4=225
p= 225 J/s
1 Joules of work per second (J/s) is equal to 1 Watt (W). Therefore, we can substitute Watts for Joules per second.
p= 225 Watts
The power is 225 Watts, and the correct answer is B.
A student is trying to dissolve 20 grams of sugar in a beaker containing 250 milliliters of water at room temperature. What can the student do to make the sugar dissolve faster in the water? a. decrease the temperature of the water b.use larger pieces c.stir rapidly d.use less water
Answer:
C. Stir rapidly
At what temperature does the solid start meltin
-20°C
0°C
20"
80°C
Answer:
0 C.
Explanation:
A beaker contains 41.3 mL of pentane ( C5H12 , density is 0.626 g/mL). Determine how many C atoms this liquid contains.
Answer:
41.3 mL OF PENTANE CONTAINS 62.608 *10^-27 CARBON ATOMS.
Explanation:
Volume of Pentane = 41.3 mL
Density = 0.626 g/mL
Since density is defined as mass per unit volume. Calculate the mass:
Density = mass / volume
Mass = density * volume
Mass = 0.626 g/mL * 41.3 mL
Mass = 0.015 g of pentane
Molar mass of pentane C5H12 = ( 12* 5 + 1*12) = 60 + 12 = 72 g/mol
Number of moles = mass / molar mass
Number of moles = 0.015 g / 72 g/mol
Number of moles = 2.08 * 10^-4 moles.
Since 1 mole of pentane contains 5 moles of carbon, we can then calculate how many moles of csrbon 2.08*10^-4 moles will contain
1 mole of pentane = 5 moles of carbon
2.08 *10^-4 moles = x moles
x mole = 5 * 2.08*10^-4
x mole = 10.4 *10^-4 moles of carbon
In other words, 10.4*10^-4 moles of carbon is present in 41.3 mL of pentane
We can then calculate the number of carbon atoms present in the liquid using:
From 1 mole containing 6.02 *10^-23 atoms, 10.4 *10^-4 moles of pentane will contain:
1 mole = 6.02*10^-23 atoms
10.4 *10^-4 moles = (6.02*10^-23 * 10.4 *10^-4) atoms of pentane
= 62.608 *10 ^-27 atoms of pentane.
So therefore, 41.3 mL of pentane will contain 62.608 * 10 ^-27 carbon atoms
The number of C atoms in 41.3 mL of pentane (C₅H₁₂) of density 0.626 g/mL is 2.16x10²³.
To find the number of C atoms in pentane, we need to find the number of moles.
We can calculate the mass from the density:
[tex] d = \frac{m}{V} [/tex]
Where:
d: is the density = 0.626 g/mL
V: is the volume = 41.3 mL
The mass is:
[tex] m = d*V = 0.626 g/mL*41.3 mL = 25.85 g [/tex]
Now, with the molecular weight of the pentane, we can calculate the number of moles:
[tex] \eta = \frac{m}{M} = \frac{25.85 g}{72.15 g/mol} = 0.358 \:moles [/tex]
The number of C atoms can be found with Avogadro's number:
[tex] n_{C} = \frac{6.022\cdot 10^{23} \:atoms}{1\:mol}*0.358 \:moles = 2.16 \cdot 10^{23} \:atoms [/tex]
Therefore, the liquid contains 2.16x10²³ C atoms.
Learn more here:
https://brainly.com/question/20091306?referrer=searchResults
I hope it helps you!
Where do you think trees get the nutrients they need to grow?
I
10 Points
Why was Dalton's theory of the atom incorrect?
A. Dalton theorized that atoms were too small to see but they are not.
B. Dalton' theory was correct.
C. Dalton theorized that had negative charges spread throughout them but they are
actually in electron shells.
D. Dalton theorized that atoms were indivisible but they are actually made of smaller
parts.
Reset Selection
Answer:
D
Explanation:
The indivisibility of an atom was proved wrong an atom can be further subdivided into protons, neutrons and electrons. However an atom is the smallest particle that takes part in chemical reactions......
hope i helped
pls mark brainliest,,,,,thanks
John Dalton was the chemist that gave the theory of atoms. His atomic model was incorrect as he said that the atoms cannot be further divided, but they are made of smaller particles. Thus, option D is correct.
What is Dalton's atomic model?Dalton's atomic model stated that all matter is composed of atoms that are made of elements with identical properties and mass. He further stated the formation of the compounds from the molecules.
In the theory, he stated that atoms cannot be divided further and are indivisible. This was proven wrong as the atoms are composed of sub-atomic particles namely, electrons, neutrons, and protons.
Therefore, the statement that atoms are indivisible in Dalton's atomic theory is incorrect.
Learn more about Dalton's theory here:
https://brainly.com/question/15507302
#SPJ5
what happens to the zebra molecules once they are eaten by the cheetah?
Answer:
All living organisms need food for their body metabolism. Food helps in the provision of basic nutrients for the body’s survival and growth.
When the Cheetah eats the Zebra, enzymes acts on the Zebra molecules and converts it into smaller molecules.
The smaller molecules broken down are then readily absorbed and used by the cells of the Cheetah.
1. What is the wavelength of a photon of light with a frequency of 6.10 x 10^15 Hz?
Answer:
0.000000000000005 mm
Explanation:
Balance the following chemical
equation by providing the correct
coefficients.
_FeBr3 +_Na2S -> _Fe2S3 + _NaBr
Answer:
2FeBr3 + 3Na2S ➡️ Fe2S3 + 6NaBr
Balance the combustion reaction between propane and oxygen.
C ₃ H ₈+ O ₂→ CO ₂ + H ₂ O
Answer:
The answer is C3H8 + 5O2 → 3CO2 + 4H2O .
Answer:
[tex]\huge \boxed{\mathrm{C_3 H_8 +5O_2 \Rightarrow 3CO_2 +4 H_2 O}}[/tex]
[tex]\rule[225]{225}{2}[/tex]
Explanation:
[tex]\sf C_3 H_8 +O_2 \Rightarrow CO_2 + H_2 O[/tex]
Balancing Carbon atoms on the right side,
[tex]\sf C_3 H_8 +O_2 \Rightarrow 3CO_2 + H_2 O[/tex]
Balancing Hydrogen atoms on the right side,
[tex]\sf C_3 H_8 +O_2 \Rightarrow 3CO_2 +4 H_2 O[/tex]
Balancing Oxygen atoms on the left side,
[tex]\sf C_3 H_8 +5O_2 \Rightarrow 3CO_2 +4 H_2 O[/tex]
[tex]\rule[225]{225}{2}[/tex]
How much quantity in mL of concentrated 12 M hcl (aq) is needed to prepare a 250mL of 0.5 M hcl solution?
Answer:
10.41 mL of concentrated 12 M HCl (aq) is needed to prepare a 250mL of 0.5 M HCl solution
Explanation:
Dilution is the procedure to prepare a less concentrated solution from a more concentrated one. The amount of solute does not vary, but the volume of the solvent varies. More solvent is added and the concentration of the solute decreases, as the volume of the solution increases.
In this case it is fulfilled:
Vi * Ci = Vf * Cf
Vi = initial volume
Ci = initial concentration
Vf = final volume
Cf = final concentration
Being:
Vi=?Ci= 12 MVf= 250 mL= 0.250 L (being 1 L= 1000 mL)Cf= 0.5 MReplacing:
Vi*12 M= 0.250 L* 0.5 M
Solving:
[tex]Vi=\frac{0.250 L*0.5 M}{12 M}[/tex]
Vi= 0.01041 L= 10.41 mL
10.41 mL of concentrated 12 M HCl (aq) is needed to prepare a 250mL of 0.5 M HCl solution
Which value gives the number of particles in 1 mol of a substance?
6.02 x 1021
6.02 x 1022
6.02 x 1023
6.02 x 1024
Answer: it's C 6.02×10²³
Explanation:
I got it right in edge
What’s one renewable energy resource that can be used instead of fossil fuels ?
Answer:
Solar Energy & Wind Energy
Explanation:
These are renewable energy and can be used used in replacement for fossil fuels.
PLS MARK ME AS BRAINLIEST!!
9. What is the difference between physical weathering and chemical weathering?
Answer: Physical Weathering physically breaks the rock, while Chemical Weathering chemically changes the rock causing it to break.
Explanation: Physical Weathering happens naturally causing the rock to break. An example is roots growing into the concrete causing it to crack. Chemical Weathering on the other hand chemically changes the rock by a chemical reaction. An example is acid rain. Gas or other pollution mixing in with water causing acid rain.
hope this helps ;)
The three most common phases of matter are
Answer:
Solid, Liquid, and Gas
Explanation:
There are constantly these three phases of matter around us every day. The water you drink is a liquid, the chair you sit on is a solid, and the air you breathe is a gas.
