/yfhjfjhnfj kugj,hgbjh,kug kkgh,u,kghgvy, jtfg
When the water in a solution evaporates, elements and compounds that were dissolved in it crystallise.
What are substances and elements?
The pure versions of the chemicals that are found on the surface of the earth are known as chemical elements. There is a periodic table with 180 elements in it, and they are organised by increasing atomic number.
Oxygen and hydrogen combine to form the molecule known as water. Heat causes elements to crystallise when they come into touch with it.
A solution is a mixture in which one ingredient has been dissolved in another. When chemicals that are dissolved in water start to separate from the solution, crystallisation occurs. Minerals are created in this manner both underground and in aquatic bodies.
They turn to crystal.
Learn more about elements here:
brainly.com/question/11568459
#SPJ4
(a) When (Z)-3-methylhex-3-ene undergoes hydroboration-oxidation, two isomeric products are formed. Give their structures, and label each asymmetric carbon atom as R or (S). What is the relationship between these isomers?
(b) Repeat part (a) for E-methylhex-3-ene. What is the relationship between the products formed from (Z)-3-methylhex-3-ene and those formed from (E)-3-methylhex-3-ene?
carbon atom in their structures. how these isomers are related to one another. Two isomeric compounds are produced by the hydroboration-oxidation of (Z)-3-methylhex-3-ene.
What is isomeric ?
The asymmetric carbon atoms in their structures with the letters (R) or (S). isomers are related to one another. Two isomeric compounds are produced during the hydroboration-oxidation reaction on (Z)-3-methylhex-3-ene. Two isomeric compounds are produced during the hydroboration-oxidation reaction on (Z)-3-methylhex-3-ene. List their structures and assign the letters R or S to each asymmetric carbon atom (S). isomers relate to one another.
For E-methylhex-3-ene, repeat the section. the products made from (Z)-3-methylhex-3-ene and those made from (E)-3-methylhex-3-ene related to one another.
To learn more about isomeric from given link
brainly.com/question/14063244
#SPJ4
Mutations can occur in sex cells or in body cells. in which cell type might a mutation be passed from generation to generation
Either cell type is susceptible to mutations. A mutation is called a germinal mutation if it occurs in a germ cell and affects a gene.
Is it possible to pass on sex cell mutations?Germline genetic mutations are inheritable. The DNA is altered in reproductive cells in this kind of mutation (egg or sperm). The mutation is inherited because sperm and eggs are passed down from parents to their offspring.
Which mutations can be found in sex cells?The transmission of germ-line mutations to an organism's progeny occurs during sexual reproduction and occurs in reproductive cells (sperm or eggs). Non-reproductive cells can develop somatic mutations; during mitosis, they are transferred to daughter cells but are not passed on to the offspring during sexual reproduction.
To know more about mutations visit:-
https://brainly.com/question/17130462
#SPJ4
Use the reaction i2(s) i2(g), h = 62.4 kj/mol, s = 0.145 kj/(molk), for question 10. which direction of the reaction is favored at 298 k (room temperature)?
A. Toward I2(g) production
B. Both are equally favored
C. It is impossible to tell
D. Toward I2(s) production
Answer:
D. Toward I2(s)
Explanation:
∆G = ∆H - T∆S
∆G = 62.4-.145*298
∆G = 19.2 kJ/mol
Since ∆G is positive (greater than 0) for this reaction, the reverse reaction (going from right to left) is favored: conversion of gaseous I2 to solid I2.
Answer:
the answer is Toward I2(s) production
Explanation:
I took the test rn and that’s what I got.
a sample of chlorine gas starting at 687 mm hg is placed under a pressure of 994 mm hg and reduced to a volume of 511.1 ml.. what was the initial volume in mL, of the chlorine gass container if the proccess was perform at constant temperature?
The initial volume of the chlorine gas container if the process was performed at constant temperature is calculated to be 739.49 ml.
What is Boyle's law?Boyle's law is also referred to as the Boyle–Mariotte law or Mariotte's law. It is an experimental gas law that explains the relationship between pressure and volume of a confined gas.
Lungs make use of Boyle's law during respiration. While inhaling, lungs are filled with air and therefore, they expand. The volume increases and hence pressure level goes down.
Given, P1= 687mm Hg P2=994 mm Hg V2= 511.1 ml
P1V1= P2V2
V1= P2V2/P1
V1= 739.49 ml
The initial volume of the chlorine gas container if the process was performed at constant temperature is 739.49 ml.
To know more about Boyle's law, refer
https://brainly.com/question/1696010
#SPJ4
Which of these is an abiotic resource? *
O Compost
O Grass
Sunlight
O ox
Answer:
Option (C) Sunlight
Explanation:
Abiotic factors refer to non-living physical and chemical elements in the ecosystem. Abiotic resources are usually obtained from the lithosphere, atmosphere, and hydrosphere.
g ge has several stable isotopes, the most common being ge-74. ge-77 is a radioactive isotope. ge-77 would be question blank 1 of 2 the band of stability. ge-77 is likely to undergo....?
From the seven isotopes of ge, Ge-77 is a radioactive isotope and has a half life of 11.3 hours.
Germanium (32Ge) has five naturally occurring isotopes, 70Ge, 72Ge, 73Ge, 74Ge, and 76Ge. Of these, 76Ge is very slightly radioactive, decaying by double beta decay with a half-life of 1.78 × 1021 years[3] (130 billion times the age of the universe)g ge has several stable isotopes, the most common being ge-74. ge-77 is a radioactive isotope. ge-77 would be question blank 1 of 2 the band of stability. ge-77 is likely to undergo.
Germanium compounds are also used for polymerization catalysts and have most recently found use in the production of nanowires. This element forms a large number of organogermanium compounds, such as tetraethylgermanium, useful in organometallic chemistry. Germanium is considered a technology-critical element.Germanium is considered a technology-critical element
To know more about isotopes:-
brainly.com/question/27475737
#SPJ4
liquid benzene (c6h6) reacts with gaseous oxygen to form carbon dioxide and liquid water. chemical equations
Liquid benzene (c6h6) reacts with gaseous oxygen to form carbon dioxide and liquid water, equation can be written as :
2C6H6 + 15O ---> 12 Co2 + 6H2O
What do you know about benzene?Benzene is a colorless/ light-yellow chemical (liquid) at room temperature and is produced by both natural and man-made processes. It is used as a solvent in the chemical and pharmaceutical industries, as a starting material and as intermediate in the synthesis of other chemicals, and in gasoline.
The combustion of one mole of benzene, C6H6(1), in oxygen generates 3.268* 103 kJ of heat and the products of the reaction are carbon dioxide and water.
To know more about benzene, refer
https://brainly.com/question/6028840
#SPJ4
a flexible container at an initial volume of 3.10 l3.10 l contains 7.51 mol7.51 mol of gas. more gas is then added to the container until it reaches a final volume of 13.7 l.13.7 l. assuming the pressure and temperature of the gas remain constant, calculate the number of moles of gas added to the container.
A flexible container with an initial volume of 3.10l can hold 21.32 moles in total. 7.51 mol of gas are present. The container is then filled with more gas until it has a total volume of 13.7 l.
When we measure atoms, we use a large quantity called the number of moles.
It is determined how many moles of a gas should be added to the container.
preliminary concentration = 7.51 moles
beginning moles - subsequent moles
computation of the final moles
7.51 moles in 3.10 litres
X moles = 11.9L
through cross-multiplication
11.9 L times 7.51 moles/3.10 L equals 28.83 moles.
Consequently, the amount of moles gained is equal to: 28.83 moles – 7.51 moles = 21.32 moles.
Learn more about moles here
https://brainly.com/question/26416088
#SPJ4
suppose 89.7 ml of a 0.150 m solution of na2so4 reacts with 121 ml of a 0.379 m solution of mgcl2 to produce mgso4 and nacl as shown.
In the given reaction, MgSO4 with a mass of 1.56 grams can be produced and the output of MgSO4 is 33.07%.
1. The whole, balanced chemical equation is as follows:
Na₂SO₄(aq)+MgCl₂(aq)⟶MgSO₄(s)+2NaCl(aq)
We are aware that the number of moles (n) in a liter of solution is known as the molarity (M).
The number of moles of Na2SO4 is calculated by Volume x Molarity.
Moles of Na2SO4 are = 0.150 ×0.089 moles
= 0.013 moles.
Moles of MgCl2 are =0.379×0.121
=0.046 moles.
It is evident that there are less Na2SO4 moles present.
Therefore, Na2SO4 will act as a limiting agent and control the reaction.
Mole ratio of Na2SO4 to MgSO4
MgSO4 has a mole mass of 0.013 moles.
As far as we know,
mass produced/molecular weight = mole
By substituting the values, molar mass of MgSO4 is 120 grams per mole, and 0.013 is the mass of Mg produced/120
1.56 grams of MgSO4 were produced in total.
2. Formula for percentage yield: (experimental mass divided by theoretical mass, multiplied by 100)
Theoretical mass = 1.56 grams
Experimental mass = 0.212 grams.
Percentage yield = 0.212/1.56×100
Percentage yield of MgSO₄ = 33.07%.
For more information on molarity kindly visit to
https://brainly.com/question/28836336
#SPJ1
Complete question: Suppose 87.1 mL of a 0.190 M solution of Na2SO4 reacts with 143 mL of a 0.311 M solution of MgCl2 to produce MgSO4 and NaCl as shown in the balanced reaction
Na2SO4(aq)+MgCl2(aq)⟶MgSO4(s)+2NaCl(aq)
1. Calculate the mass of MgSO4 that can be produced in the given reaction.
2. Only 0.212 g of MgSO4 are isolated after carrying out the reaction. Calculate the percent yield of MgSO4
why do metals tend to lose electrons to form positive ions; nonmetals tend to gain electrons to become; these elements are nonmetals that gain one electron to form 1 ions; do nonmetals tend to gain or lose electrons; metals tend to lose electrons to become positive ions; do metals gain or lose electrons to form ions; metals tend to lose electrons and become; why do metals lose electrons
In a reaction between two different types of materials, metals often lose electrons to finish out their octet whereas non-metals receive electrons to do the same.
A definition of an element.A crucial component of a whole. a simple material that cannot be divided into smaller components or transformed into another substance is referred to as in chemistry. Atoms, which are made up of protons, neutrons, and electrons, are the building blocks of an element. One element has a fixed number of protons in each of its atoms.
What does a simple word "elements" mean?A material is considered to be an element if all of its atoms contain the same number of protons, or, to put it another way, if all of the atoms. The most basic chemical forms are those of the elements.
To know more about Elements visit:
https://brainly.com/question/13025901
#SPJ4
Select all of the statements that correctly describe an amphoteric molecule or ion.
It can act as either a base or an acid.
It contains at least one hydrogen atom.
It can undergo either an acid-base reaction or an oxidation-reduction reaction.
It contains at least one chlorine atom.
It contains at least one lone pair of electrons.
It can act as either a base or an acid.
It contains at least one hydrogen atom.
It contains at least one lone pair of electrons.
The correct statements about amphoteric molecule or ion are: It can act as either a base or an acid.
It contains at least one hydrogen atom.
It contains at least one lone pair of electrons.
What is an amphoteric molecule or ion?An amphoteric (or amphiprotic) molecule is one that can function as both an acid and a base. Glycine is an example of an amphoteric amino acid. Base is the amino group (it can accept a proton).
Hydrogen ions can be repeatedly removed from an acid or repeatedly added to a base to reveal amphoteric compounds. Since NO2 is not an acid and does not contain any extra hydrogen ions, much alone extra hydrogen ions that cannot be eliminated, it is not amphoteric.
To know about amphoteric molecule you may visit the link:
https://brainly.com/question/29098795
#SPJ4
the lattice energy for nacl crystals is equal to -787 kj/mol. the enthalpies of solvation for na and cl- ions are equal to -424 kj/mol and -359 kj/mol respectively. for the process of making the nacl aqueous solution, the q value (the heat exchanged between the system i.e. nacl and the surroundings i.e. water) will have a negative sign.
the lattice energy for nacl crystals is equal to -787 kj/mol. the enthalpies of solvation for na and cl- ions are equal to -424 kj/mol and -359 kj/mol respectively. for the process of making the nacl aqueous solution, the q value will have a positive sign not negative sign.
The energy required to transform one mole of such an ionic solid into gases ionic constituents is described as lattice energy. It also can be described as the quantity of energy required to separate one mole of an anion crystal into individual atoms in a vacuum to use an endothermic process. The power of the bond among positive and negative ions in an anion is thus determined by the fees on the ions as well as the distance between both the facilities of the ions when they bundle together just to form a crystal. The liquid in an aqueous is liquid water. Solute (disintegrated) protons and compounds have been enclosed by water particles and integrated into the water's network of bonds.
Learn more about lattice energy here:
https://brainly.com/question/29735933
#SPJ4
multi choice, choose one answer for each question4. Water is a polar solvent and hexane (C6H14) is a nonpolar solvent. Which of the following correctly describes the solubility of the solute?a. mineral oil, soluble in waterb. CCl4, soluble in waterc. CaCl2, soluble in hexaned. NaHCO3, soluble in watere. octane (C8H18), soluble in water5. Oil does not dissolve in water becausea. water is saturated.b. oil is polar.c. oil is nonpolar.d. water is nonpolar.e. oil is hydrated.6. In a saturated solution, the rate at which the solute dissolvesa. cannot be changed by changing the temperature of the solution.b. depends on the number of ions the solute dissociates into.c. equals the rate of crystallization of the solute.d. can be increased by cooling the solution.e. depends on the amount of material undissolved.
Hexane (C6H14) is a polar solvent, whereas the nonpolar solvent NaHCO3 is soluble in water.
Is it safe to ingest hexane?Hexane is poisonous, and prolonged exposure can harm the nervous system. But it is not derived from food. People who work in oil refineries and other locations where hexane may leak into the air are more likely to become exposed to it.
Is hexane a cancer-causing substance?There is no proof that n-hexane causes cancer in humans or animals. N-hexane has not been designated as carcinogenic by the EPA, the International Agency for Research on Cancer (IARC), or the Department of Health and Human Services (DHHS).
To know more about Hexane visit:
https://brainly.com/question/14640336
#SPJ4
1) Complete and balance the molecular equation for the reaction between aqueous solutions of silver nitrate and hydrochloric acid, and use the states of matter to show if a precipitate forms.
2) Write the complete ionic equation for the reaction that takes place when aqueous solutions of silver nitrate and hydrochloric acid are mixed.
3) Write the net ionic equation for the precipitation reaction, if any, that may occur when aqueous solutions of silver nitrate and hydrochloric acid are mixed. If there is no net ionic equation, simply write "none."
Equations will be
AgNO3(aq)+HCl(aq)⟶AgCl(s)+HNO3(aq)
AgNO3+HCl⟶AgCl+HNO3
Ag:+1⟶+1
NO3:−1⟶−1
H:+1⟶+1
Cl:−1⟶−1
According to the solubility table, nitrates are always soluble, so the strong ionic bond between silver ions and nitrate ions are broken by water molecules because of ion-dipole attraction. Acids ionize in water to give mobile ions, so hydrogen chloride in aqueous solution gives out hydrogen ions (and form hydronium ions) and chloride ions.
There are five types of particles in the solution :
H2O molecules, Ag+ ions, NO3− ions, H+ ions, and Cl− ions. (Slight ionization of water is neglected in this case.) They freely bump into each other as they are mobile. However, this freely moving condition is inhibited by the interaction between Ag+ ions and Cl− ions.
According to the solubility table, AgCl is insoluble in water. When Ag+ ions and Cl− ions bump into each other, they strongly attract each other, in which the strong ionic force cannot be separated by the ion-dipole force between them and H2O molecules. As a result, AgCl evolves as a white solid.
To know more about Acids :-
brainly.com/question/14072179
#SPJ4
A 8.00 L tank at 22.8 °C is filled with 6.88 g of sulfur hexafluoride gas and 2.33 g of dinitrogen monoxide gas. You can assume both gases behave as ideal gases under these conditions. Calculate the mole fraction and partial pressure of each gas, and the total pressure in the tank.
Mole fraction of SF6 is 0.081 and N₂O is 1.107 . Partial pressure of SF6 is 0.126 atm and N₂O is 0.273 atm .
In chemistry, what does a mole fraction mean?the proportion of the moles with one component to the total moles of all the components in a solutions or other mixture.
Briefing:Mole fraction of each gas,
Sulfur hexafluoride molar mass = 146.1 g / mol) = SF6
moles SF6 = 6.88 g x 1 / 146.1 = 0.047 moles
dinitrogen monoxide = N₂O = 44.013 g/mol
moles N₂O = 2.33 g x 1 /44.013 = 0.53 moles
Total moles = 0.047 moles + 0.53 moles = 0.577 moles
Mole fraction SF6 = 0.047 / 0.577 = 0.081
Mole fraction N₂O = 0.53 / 0.577 = 1.107
by using formula, we can determine the partial pressure for each gas
PV = nRT
P = pressure = ?
V = volume = 8.00 L
n = moles = 0.577 moles
R = gas constant = 0.0821 Latm/Kmol
T = temperature in K = 22.8 °C + 273.15 = 295.95 K
P = nRT/V = (0.577)(0.0821)(295.95) / 8.00
P = 1.75 atm = Total pressure
Partial pressure SF6 = 1.75 atm x 0.081 = 0.126 atm
Partial pressure N₂O = 1.75 atm x 1.107 = 0.273 atm
To know more about mole fraction visit:
https://brainly.com/question/12127540
#SPJ4
An electric field of strength 2*10^3v/m was applied to restore cathode rays to their original path after they were deflected through a curved path of radius 1.0*10^-2m by a magnetic field of strength 1.07*10^-3T.Calculate the charge to mass ratio for the electron.
What do noble gases electron configuration have in common?; What do the elements neon helium argon and xenon have in common?; What is the electronic configuration of helium, neon and argon?; What do the electron configurations of neon argon krypton xenon and radon have in common?
Noble gases have full outer shells valence electrons. Helium, argon and xenon have p orbitals. Neon, argon, krypton and xenon are all noble gases and thus have a full outer shell.
Noble gases are the elements that belong respectively to group 18 . since they are the very last group on the periodic table, they have full outer shells of valence electrons. Helium, neon, and argon are all noble gases located in the last group that is 18th group of the periodic table. All noble gases have p orbitals. Electronic configuration for Neon is [He] 2s2 2p6. The configuration for Helium [He] is 1s2. and of argon, there are 8 valence electrons in this element and hence, has fully filled electronic configuration and is a stable element. This means that their outermost s and p orbitals are completely filled.
To learn more about Noble gases please visit:
https://brainly.com/question/13715159
#SPJ4
which of the following agents blocks the body's ability to use oxygen and possesses an odor similar to almonds?
Agent that blocks the body's ability to use oxygen and possesses an odor similar to almonds is : hydrogen cyanide.
What is hydrogen cyanide?Hydrogen cyanide is sometimes also called prussic acid. It is a chemical compound with the formula HCN ( structure H−C≡N ) and it is a colorless, extremely poisonous and flammable liquid.
Hydrogen cyanide is a colorless or pale-blue liquid or gas with a bitter, almond-like odor and it interferes with the body's use of oxygen and may also cause harm to the brain, heart, blood vessels, and lungs. Exposure can sometimes prove to be fatal and workers may be harmed from the exposure to hydrogen cyanide.
To know more about hydrogen cyanide, refer
https://brainly.com/question/3393639
#SPJ4
1) Which option describes a situation in which reduction occurs?(1 point)
S2– becoming S
Cl2 becoming Cl–
Al becoming Al3+
Xe2+ becoming Xe6+
The option that describes a situation in which reduction occurs is Cl₂ becoming Cl⁻
In chemistry, reduction means a class of chemical reactions in which the number of electrons associated with an atom or group is increased.
A compound that accepts electrons is said to be reduced.
Situations in which reduction occurs include:
Cl₂ ⇒Cl⁻
When reduction occurs, the oxidation number (superindex) appears to decrease that number. In this case 2+ becomes 1-.
Note:
As with other problems, a decreasing oxidation number means that the compound or element is being reduced (gaining electrons), while an increasing oxidation number means it is being oxidized (losing electrons). increase.
learn more about oxidation-reduction refer:
brainly.com/question/4222605
#SPJ4
B) State right (V) or wrong (x): 1. The internal energy in the cyclic process has constant value. 2. An adiabatic system is one which cannot transfer energy but transfer matter to and from its surrounding. 3. Heat of combustion could be used in calculation of the heat of formation. 4. An isochoric process takes place at constant concentration.
Answer:
1. False. The internal energy of a system can vary during a cyclic process.
2. False. An adiabatic system is a system that does not exchange heat with its surroundings. It may still be able to transfer matter or energy in other ways.
3. True. The heat of combustion is the amount of heat produced when a substance is burned. It can be used to calculate the heat of formation, which is the heat absorbed or released when a substance is formed from its elements.
4. False. An isochoric process is a process that takes place at constant volume. It does not necessarily involve a change in concentration.
Explanation:
How to remove dye from effluent from azo dye factory
The removal of the azo dye can be achieved by the use of the adsorbents.
How do you remove the azo dye?We know that a dye could be one of the contaminants that could be seen to be present in an effluent stream. It is always very important that we should be able to remove the wastes that are part of a stream as this is going to make sure that we do not have the effluent filled with a contaminant.
The contaminant that is found in the stream can be able to be passed into the aquatic ecosystem and then it could be passed along food chain and this is going to cause a much larger damage to people that are living in a locality.
We can be able to remove the azo dye by the use of the adsorbents that would be able to take up the dye and such save the environment.
Learn more about azo dye:https://brainly.com/question/16037662
#SPJ1
identify each of the changes as either path dependent or path independent. you are currently in a sorting module. turn off browse mode or quick nav, tab to items, space or enter to pick up, tab to move, space or enter to drop. path dependent path independent answer bank
Answer:
turn off browse mode or quick nav, tab to items,
Explanation:
the halogens, X2 Draw the molecule by placing atoms on the grid and connecting them with bonds. Include nonbonding electrons. Use X to indicate a halogen atom.
In a lewis structure of a molecule, we place the valance electrons of the bonded atoms around them. Then the shared pair or bond pair electrons between the bonded atoms are joined and represented as a line.
whereas the nonbonding electrons called lone pairs are kept as a pair of dots around them. Now we know the valance electrons of any halogen is 7. So each halogen needs only 1 more electron to complete its octet. Hence on X2, each X-atom will share one of the electrons to form a single bond as in the image.
Halogens exist as simple molecules. Each molecule contains two halogen atoms joined by a single covalent bond. The table shows the color and physical state of chlorine, bromine, and iodine at room temperature. The word halogen means a salt-forming compound. All halogens have 7 electrons in their valence shell.
Learn more about A halogen atom here:- https://brainly.com/question/364367
#SPJ4
what does the ph scale measure; what is ph in water
Answer:
The ph scale measures how acidic a substance is.
The ph level in water is about 7
Explanation:
Which one of the two phase transitions (freezing or vaporizing) has the larger magnitude in the change of entropy? Explain in terms of statistical model of entropy.
Entropy changes more significantly during phase transitions during freezing.
Change in entropy during a phase change is defined as:-
∆S = change in enthalpy/ temperature (absolute)
Enthalpy values in both processes are comparable.
But, since the temperature in freezing will be much lower than the temperature in vaporizing, enthalpy change in freezing will contribute to a larger magnitude of change in the randomness of the molecules. Hence, it's the magnitude of entropy change will be larger.
A state of disorder, randomness, or uncertainty is most frequently connected with the scientific notion of entropy, which is also a quantifiable physical attribute. The notion and the phrase are employed in a variety of disciplines, including classical thermodynamics, where they were initially identified, statistical physics, which describes nature at the molecular level, and information theory. It has wide-ranging uses in physics and chemistry, biological systems, and how they relate to life, cosmology, economics, sociology, weather science, and information systems, particularly the transfer of information through telecommunication.
Learn more about entropy here:
https://brainly.com/question/15025401
#SPJ4
Draw the structure of the straight chain hydrocarbon that produces the IR and mass spectrum given. For common IR absorptions see Tables 16.3.Hint: Take note of the characteristic IR peak at 2120 cm-1 and relate this to the size of the M-1 peak in the mass spectrum.100E 5021203311 2962040003000200015001000500Wavenumber (cm)
2-Methylbutane's mass spectrum. Pentane's isomer, 2-methylbutane, has the same molecular make-up as isomers do. In comparison to IR spectroscopy, the MS offers the distinct advantage that more structural data may be ascertained.
What is mass spectrum ?
Mass spectrometry can be used to determine the skeletal formula of a structural isomer of heptane butan-1-ol generated in The composition of another ester, an isomer of ethyl propanoate, which has a strong peak in its mass spectrum at m/z = 71. In mass spectrometry, ions are produced from a sample that will be examined. The process of ionizing these ions can either result in the production of the molecular ion M+. The majority of infrared spectra can be produced as a linear frequency absorbance spectrum.
To learn more about mass spectrum from given link
brainly.com/question/1698571
#SPJ4
g when 63ni (atomic number 28) undergoes beta decay, what is the resulting daughter particle? (in the blanks below, type in element symbol, atomic number, and mass number. do not type in the full name of the element.) the daughter particle is element symbol question blank 1 of 3 with atomic number question blank 2 of 3 and mass number question blank 3 of 3
The resulting daughter particle is the remaining nuclide left over from radioactive decay.
In a nuclear decay reaction, also called radioactive decay, an unstable nucleus emits radiation and transforms into the nucleus of one or more other elements. The resulting daughter nucleus has lower mass and energy than the decaying parent nucleus.
The first isotope is called the parent and the new isotope is called the daughter. The half-life of an isotope is the time it takes for half of the atoms of the parent isotope to change to atoms of the daughter isotope. The spontaneous transformation of one unstable nuclide into another is radioactive decay. Unstable nuclides are called parent nuclides.
Learn more about The resulting daughter here:- https://brainly.com/question/28252447
#SPJ4
Is a charge indicated on the neutral atoms? If yes, where is it located?
Neutral atoms do not have a charge indicated on them because they have an equal number of protons and electrons, which cancel each other out. This means that the net electrical charge of a neutral atom is zero.
Protons and neutrons, which make up the nucleus of an atom, are positively charged. Electrons, which orbit the nucleus, are negatively charged. In a neutral atom, the number of protons and electrons is equal, so the positive charge of the protons is canceled out by the negative charge of the electrons, resulting in a net charge of zero.
However, atoms can gain or lose electrons to form ions, which do have a net electrical charge. If an atom gains one or more electrons, it becomes negatively charged and is called an anion. If an atom loses one or more electrons, it becomes positively charged and is called a cation. The charge of an ion is indicated by a superscript after the chemical symbol for the element, for example, Cl- for chloride ions (anions) and Na+ for sodium ions (cations).
The order of prosthetic groups as they act in the three proteins of the PDH(pyruvate dehydrogenase) complex is:A) FAD → thiamine pyrophosphate → NAD+B) FAD → thiamine pyrophosphate → dihydrolipoamideC) thiamine pyrophosphate → dihydrolipoamide → FADD) NAD+ → FAD → dihydrolipoamide
The order of prosthetic groups as they act in the three proteins of the PDH (pyruvate dehydrogenase) complex is: C) thiamine pyrophosphate → dihydrolipoamide → FAD
A prosthetic group is a non-amino acid component that is closely attached to the apoprotein and makes up the structure of heteroproteins or conjugated proteins. Not to be confused with the cofactor that non-covalently binds a non-protein to the enzyme apoenzyme (either a holoprotein or heteroprotein) (non-amino acid) A conjugated protein must contain this part in order for the protein to function biologically. [1] The prosthetic group may be inorganic (such as a phosphate, lipid, sugar, vitamin, or RNA) or organic (such as a metal ion). Proteins are firmly connected by prosthetic groups, and they may even be joined by a covalent bond.
To learn more about Prosthetic group visit here;
https://brainly.com/question/5679226
#SPJ4
which of the following compounds are arrhenius bases? multiple select question. hno3 nabr ca(oh)2 koh ch3cooh
The common examples of Arrhenius base include NaOH (sodium hydroxide), KOH (potassium hydroxide), Ca (OH)2 (calcium hydroxide), Mg (OH)2 (magnesium hydroxide), NH4OH (ammonium hydroxide), etc.
Svante Arrhenius, a Swedish scientist, developed the Arrhenius acid-base theory. It represented the concept of acid and base in a modern context. This theory is straightforward and helpful. The chemical that raises the concentration of H+ or proton in aqueous solution, according to Arrhenius theory, is an acid. The proton or H+ ion that is released coexists with the water molecule to produce the hydronium ion (H3O+), which is not a free-floating proton. Hydrochloric acid, sulfuric acid, nitric acid, and other acids are typical examples of Arrhenius acids. According to Arrhenius, bases are hydroxide compounds that give OH ions upon dissociation in water, whereas acids are hydrogen-containing compounds that give H+ ions or protons upon dissociation in water.
To learn more about Arrhenius visit here;
https://brainly.com/question/9936252
#SPJ4
