Answer:
B) They aggregate together.
Explanation:
A nonpolar molecule refers to a molecule in which there is no charge separation that means no positive or negative poles are created
Also it cannot create the bonds of hydrogen with the water molecules that results in the disturbance of normal structure of water that makes the water to create a fixed cage of molecules that are hydrogen bonded around it
Therefore in the given case, the option B is correct
what happens when the net forces are the same, do you add or subtract it
Answer:
If two forces act on an object in the same direction, the net force is equal to the sum of the two forces.
Explanation:
google is my explanation
Answer:
Answered by Oreo!
Explanation:
So a net force is the sum of all forces acting on an object! The question u asked is if the net forces are the same, do u add or subtract it.. <= the answer to that would be:
If it’s the same than the net force is the sum of the forces...
The net force = to the sum of two forces
Hope this helps! Sorry if something didn’t go right, I’m new to brainly! :)
An atom or ion has 41 neutrons, 36 protons, and 36 electrons. Identify the element symbol, and determine the mass number
and charge for this atom or ion.
Answer:
Element symbol: Kr.
Mass number: 77.
Charge : 0.
Explanation:
Hello,
In this case, since such substance has the same amount of protons and electrons we can infer it is an atom whose number of neutrons is defined by considering its atomic mass or mass number and atomic number which is actually equal to the number of protons and electrons (36):
[tex]neutrons=atomic\ mass - atomic\ number[/tex]
In such a way, solving for the atomic mass we obtain:
[tex]atomic\ mass=neutrons+ atomic\ number\\\\atomic\ mass=41+36=77[/tex]
It means that the element is krypton (Kr) as it has 36 electrons and protons so its charge is 0.
Best regards.
A gold-colored pebble is found in a stream. Its mass is 23.2 mg and its volume is 1.20 mm3. What is its density in grams per cubic centimeter? Is it gold?
Answer:
The density in g/cm3 is 1.9333(put a line above the 3's to show it's repeating).
And no it is not gold because the density of gold in g/cm3 is 19.3.
Explanation:
Divide the mass by the volume in order to get an object's Density.
so, 23.2 divided by 1.20 mm3
=1.93333333 g/cm3
That is the density then you find out the density of gold in grams per cubic centimeter, that is 19.3 g/cm3
For example, gold will always have a density of 19.3 g/cm3; if a mineral has a density other than that, it isn't gold.
Good's buffers are compounds that are useful near neutral pH. MES buffer has pKa of 6.15, MOPS has pKa of 7.5, and HEPPS has pKa of 8.0.Required:Identify which Good's buffers are most effective near pH 7.0 and near pH 6.0.
Answer:
MES for pH near to 6.0 and MOPS for pH near to 7.5.
Explanation:
Hello,
In this case, given that the Henderson-Hasselbach equation is:
[tex]pH=pKa+log(\frac{[Base]}{[Acid]} )[/tex]
Good's buffers are those having pKa's near to the required pH since we look for a [Base]/[Acid] ratio to approach 1, thus, for a pH near to 7.0 a good buffer may be MOPS as it has a pKa of 7.5 and for a pH neat to 6.0 a good buffer may be MES as it has a pKa of 6.15.
Best regards.
Which element has fewer than 4 dots In its Electron dot diagrams
Answer:Strontium (Sr) and Gallium (Ga)
Explanation:
Strontium (Sr) and Gallium (Ga) are the elements which have fewer than four dots in the electron dot diagrams. Explanation: Electron dot diagrams are the diagrams which represent the valence electrons in an element. The electrons are represented by the dots in these diagrams.
Theories in science can be disproved through new or extended research.
1. True
2. False
Answer:
True
Explanation:
This is true because technology advances all the time and even Newton's "Laws" could be disproved in the future.
Answer:
True
Explanation:
Based on new research we find out new things
water is denser than oil. When frozen, the oil sinks to the bottom. Why?
Answer: When water freezes it gets larger and becomes a solid but it still weighs the same as when it was a liquid form. When it becomes larger it takes up space but makes it less dense. Ok so getting to the point- oil unlike water becomes more dense when frozen so this is why oil sinks in water. Sorry if this was confusing but I hope it helped have a great day and god bless you :3
Which expression correctly describes energy using SI units? A. 1 J=1kg•m^2/s^2 B. 1 J= 1kg•m/s^2 C. 1 J= 1kg• m/s D. 1 J= 1kg•m^2/s
Answer:
A. 1 J=1kg•m^2/s^2
Explanation:
Energy refers to the capacity to do work. According to the International System of units (SI units), energy is measured in Joules.
Energy is represented by the force applied over a distance. Force is measured in Newton (N) and distance in metres (m). Hence, energy is Newton × metre (N.m)
Newton is derived from the SI units of mass (Kilograms), and acceleration (metres per seconds^2) i.e Kg.m/s^2, since Force = mass × acceleration.
Since; Energy = Newton × metres
If Newton = Kg.m/s^2 and metres = m
Energy (J) will therefore be; Kg.m/s^2 × m
1J = Kg.m^2/s^2
What is the difference between solid, liquid and ice? Use ice, water and steam as examples.
Answer: A solid is something that can hold its own shape and is hard to compress (squash). However, ice is different from most solids because its molecules are less densely packed than in liquid water so ice takes up a little more space than the same amount of liquid water. This is why ice floats.
Explanation: Hope it works!!!!!
When finding the density of a solid, which situation prevents us from being
able to accurately find the volume displacement?
a) if the solid floats
b) if we use an analytical balance
c) if the solid sinks
d) if we use a graduated cylinder
Answer:
a) if the solid floats
Explanation:
Hello,
In this case, since the determination of the volume of a solid when submerged in water requires to use an analytical balance to measure the mass, but also it is necessary that the solid sinks in order to completely displace the what in the graduated cylinder which accurately provides the volume of the solid via its scale. Therefore, a draw back is a) if the solid floats since the water is not completely displaced.
Best regards.
IF YOU ANSWER FIRST, I'll give you the crown hehe
Data can be collected by observations and performing experiments.
True OR False
Answer:
True
Explanation:
Based on Chromium's position on the periodic table, which statement describes the element
chromium (Cr), atomic number 24?
A. chromium is a nonmetal and therefore a good conductor of heat and electricity
B. chromium is a metal that is more reactive than potassium
C. chromium is a metal that is less reactive than sodium
D. chromium is a noble gas that is not reactive
Answer:
C. chromium is a metal that is less reactive than sodium.
Explanation:
Hello.
In this case, since chromium is in period 4 group VIB we infer it is a transition metal which slightly reacts with acids and poorly reacts with oxygen and other oxidizing substances. Thus, in comparison with both sodium and potassium which are highly reactive even with water as they get on fire, we can say that it is less reactive than both potassium and sodium, therefore, answer is: C. chromium is a metal that is less reactive than sodium.
Best regards.
How many molecules are in 237 g (about a cup) of water? a. 1513.1 b. 4267 c. 6.02 * 1023 d. 93 * 1024 e. 7.93 * 10 24
Answer:
7.93E24 molecules of water
Explanation:
determine no. of moles of water: 237 g/18 g/mole H2O= 13.17 moles H2O
13.17 moles H2O x 6.02E23 molecules/mole= 7.93E24 molecules of water
Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 7.93×10²⁴ molecules are in 237 g (about a cup) of water. The correct option is option E.
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.
Mathematically,
number of moles of water=237 g÷18 g/mole
number of moles of water = 13.17 moles
number of atoms/molecules=number of moles × 6.022×10²³(Avogadro number)
molecules of water=13.17 moles x 6.02×10²⁴
molecules of water=7.93×10²⁴ molecules of water
Therefore, 7.93×10²⁴ molecules are in 237 g (about a cup) of water. The correct option is option E.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ5
A reaction in which A, B, and C react to form products is zero order in A, one-half order in B, and second order in C.
a. Write a rate Jaw for the reaction.
b. What is the overall order of the reaction?
c. By what factor does the reaction rate change if [A] is doubled (and the other reactant concentrations are held constant )?
d. By what factor does the reaction rate change if [B] is doub led (and the other reactant co ncen trati ons are held consta nt )?
e. By what factor does the reaction rate change if [C] is doubled (and the other reactant concen trations are held constant)?
f. By what factor does the reaction rate change if the concentrations of all three reactants are doubled?
Answer:
a. [tex]r=k[B]^{1/2}[C]^2[/tex]
b. [tex]Order=3.5[/tex]
c. It does not affect the rate.
d. [tex]\sqrt{2}[/tex].
e. 4.
f. 4[tex]\sqrt{2}[/tex].
Explanation:
Hello,
In this case, considering the given information, we have:
a. [tex]r=k[B]^{1/2}[C]^2[/tex]
b. By adding 1/2 and 2 (powers for B and C), the overall order is:
[tex]Order=\frac{1}{2} +2\\\\Order=3.5[/tex]
c. It is not changed, since the concentration of A is not affecting the rate due to its specific zeroth-order.
d. In this case, if the concentration of B is doubled, such term in the equation shows:
[tex]\sqrt[n]{x} \frac{r_f}{r_i}=\frac{[2B]^{(1/2)} [C]^2}{[B]^{(1/2)}[C]^2} \\\\\frac{r_f}{r_i}=\frac{[2B]^{(1/2)}}{[B]^{(1/2)}}\\\\\frac{r_f}{r_i}=(\frac{2}{1})^{1/2}\\\\r_f=\sqrt{2} r_i[/tex]
It means that the rate increases by a factor of [tex]\sqrt{2}[/tex].
e. In this case, if the concentration of C is doubled, such term in the equation shows:
[tex]\frac{r_f}{r_i}=\frac{[B]^{(1/2)}[2C]^2}{[B]^{(1/2)}[C]^2} \\\\\frac{r_f}{r_i}=(\frac{[2C]}{[C]})^{2}\\\\\frac{r_f}{r_i}=(\frac{2}{1})^{2}\\\\r_f=4r_i[/tex]
It means that the rate increases by a factor of 4.
f. In this case, if the concentration of both B and C are doubled, such terms in the equation shows:
[tex]\frac{r_f}{r_i}=\frac{[2B]^{(1/2)}[2C]^2}{[B]^{(1/2)}[C]^2} \\\\\frac{r_f}{r_i}=\frac{2^{(1/2)}2^2}{1^{(1/2)}1^2} \\\\\frac{r_f}{r_i}=4\sqrt{2} \\\\r_f=4\sqrt{2} r_i[/tex]
It means that the rate increases by a factor of 4[tex]\sqrt{2}[/tex].
Best regards.
Which statement accurately describes the Doppler effect?
Answer:
Explanation:
These statements accurately describe the Doppler Effect: It indicates galaxy motion through light wavelengths. It indicates a galaxy moving toward Earth through red shift. I hope this helps.
What period is Zn (zinc) in?
O A. 2A
O B. 12
O C. 30
D. 4
Answer:
D. 4
Explanation:
The periodic table of elements is organized by the number of
Answer:
the increasing mass number
17. Elements in the periodic table are arranged according to their.
How many moles is 90.93 grams of aluminum?
A)2453.47 moles
B)6.02x1023 moles
C)3.37 moles
D)2.107x1024 moles
Answer:
C) 3.37 moles .
Explanation:
Hello,
In this case, considering that the atomic mass of aluminum is 27.0 g/mol, the moles in 90.93 g of aluminum are computed via the following dimensional analysis:
[tex]n=90.93 gAl*\frac{1molAl}{27.0gAl} \\\\n=3.37molAl[/tex]
Thus, answer is C) 3.37 moles .
Best regards.
When of a certain molecular compound X are dissolved in of dibenzyl ether , the freezing point of the solution is measured to be . Calculate the molar mass of X. If you need any additional information on dibenzyl ether, use only what you find in the ALEKS Data resource. Also, be sure your answer has a unit symbol, and is rounded to significant digit.
This question is incomplete, the complete question is;
When 4.28 g of a certain molecular compound X are dissolved in 60.0 g of dibenzyl ether [(C₆H₅CH₂)₂0] , the freezing point of the solution is measured to be -3.2°C . Calculate the molar mass of X.
If you need any additional information on dibenzyl ether, use only what you find in the ALEKS Data resource. Also, be sure your answer has a unit symbol, and is rounded to significant digit.
Answer: molar mass of solute (X) is 88.03 g/mol
Explanation:
Given that;
mass of solute = 4.28 g
mass of solvent = 60.0 g = 0.060 kg (Dibenzyl ether)
depression constant kf = 6.17 °CKg/mol
Freezing Point of solvent T₀ = 1.80°C (Dibenzyl ether)
freezing point of solution Tsol = -3.20°C
Now we know that
Depression in freezing point ΔTf = depression constant kf × molaity m
and (ΔTf = T₀-Tsol)
so T₀ - Tsol = kf × m
we substitute
1.80 - (-3.20) = 6.17 × m
5 = 6.17 × m
m = 5 / 6.17
m = 0.8103 kg/mol
so molaity m = 0.8103 kg/mol
we know that
Molaity of solute m = (mass of solute / M.wt of solute) × ( 1 / mass of solvent in Kg)
solve for molar mass of solute
molar mass of solute = (mass of solute / molaity) × ( 1 / mass of solvent in Kg)
now we substitute
molar mass = (4.28g / 0.8103 kg/mol) × (1 / 0.060kg)
molar mass = ( 5.2839 × 16.66 ) g/mol
molar mass = 88.0297 g/mol ≈ 88.03 g/mol
Therefore molar mass of solute (X) is 88.03 g/mol
What property of water makes it possible for water from the ground to travel all the way up to leaves in the tops of tall trees?
Answer:
cohesion-tension
Explanation:
i did the quiz.
100 POINTS!! PLEASE HELP WILL MARK BRAINLIEST
Answer:
a. 13.5 mL
b. 4.01 g and 112.0 mL
c. 22.3 mL
d. 2.62 g/mL
e. it will float on bromine and mercury
Explanation:
a. 13.534=10/x
b. 8.920=x/0.45 and 8.920= 1000/x. the reason its 1000 is because 1 kg is converted to grams, same unit for the density.
c. 0.789=17.6/x
d. 68.2-56.3 is the volume of the quartz. so 31.18/11.9 is the density
e. 33.93/12.5 gives you the density which is 2.7144. so in order to float, it has to be in a substance with a greater density such as bromine with a 3.119 density.
Hope that helped!
Which of the following describes radioactive decay by beta particle emission?a. The daughter isotope has an atomic number two less than the parent and a mass number four less.b. The mass number of the daughter isotope is one more than the parent, and both isotopes have the same atomic number.c. The atomic number of the daughter isotope is one more than the parent; the mass numbers are the same.d. The daughter isotope has an atomic number one less than the parent and a mass number two less.
Answer:
c. The atomic number of the daughter isotope is one more than the parent; the mass numbers are the same
Explanation:
Radioactive decay by beta particle emission involves the emission of an electron.
An electron is a very light particle and its emission does not reflect a loss in mass of the parent molecule. However, the atomic number of the parent molecule increase by one due to the retention of a proton.
Therefore, the daughter isotope has the same mass number as the parent molecule but its atomic number increases by one unit.
An example of beta particle emission is given below;
Th₀(234) ---> Pa₉₁(234) + e₋₁(0)
Thorium₉₀(234) emits a beta particle, e₋₁(0) to give Protactinium₉₁(234)
Answer:
c
Explanation:
0.400 mole of sucrose, C 12H 22O 11, contains ________ C atoms.
Answer:
2.89x10²⁴ atoms of Carbon are contained in 0.400 moles of sucrose
Explanation:
The formula of sucrose is C₁₂H₂₂O₁₁, that means per mole of sucrose you will have 12 moles of carbon. In 0.400 moles of sucrose you will have:
0.400 moles Sucrose * (12 moles C / 1 mole Sucrose) = 4.8 moles of Carbon
To convert moles to atoms you must use Avogadro's number (1 mole contains 6.022x10²³ atoms):
4.8 moles Carbon * (6.022x10²³ atoms / 1 mole) =
2.89x10²⁴ atoms of Carbon are contained in 0.400 moles of sucrose0.4 mole of sucrose, C₁₂H₂₂O₁₁ contains 2.89×10²⁴ carbon atoms
How to determine the mole of carbon1 mole of C₁₂H₂₂O₁₁ contains 12 mole of C.
Therefore,
0.4 mole of C₁₂H₂₂O₁₁ will contain = 0.4 × 12 = 4.8 mole of C
How to determine the atoms of carbonFrom Avogadro's hypothesis,
1 mole of C = 6.02×10²³ atoms
Therefore,
4.8 mole of C = 2.89×10²⁴ atoms
Thus, 0.4 mole of sucrose, C₁₂H₂₂O₁₁ contains 2.89×10²⁴ carbon atoms
Learn more about Avogadro's number:
https://brainly.com/question/26141731
Determine the identity of an unknown element X using the given table and following clues:
I) Element X is a solid
II) Element X will bond ionically with element O in a 1:1 ratio.
III) As a positive ion, it will have the same number of electrons as argon.
A) calcium
B) chlorine
C) potassium
D) sulfur
Answer:
calcium
Explanation:
Hafnium (Hf) has six naturally occurring isotopes: 0.16% of 174Hf, with an atomic weight of 173.940 amu; 5.26% of 176Hf, with an atomic weight of 175.941 amu; 18.60% of 177Hf, with an atomic weight of 176.943 amu; 27.28% of 178Hf, with an atomic weight of 177.944 amu; 13.62% of 179Hf, with an atomic weight of 178.946 amu; and 35.08% of 180Hf, with an atomic weight of 179.947 amu. Calculate the average atomic weight of Hf.
Answer:
178.463 amu
Explanation:
Average atomic weight of Hafnium is calculated as follows;
[(0.0016 × 173.940) + (0.0526 × 175.941) + (0.186 × 176.943) + (0.2728 × 177.944) + (0.1362 × 178.946) + (0.3508 × 179.947)] =0.278 + 9.234 + 32.911 + 48.543 + 24.372 + 63.125 = 178.463 amu
Therefore, average atomic weight of Hafnium is 178.463 amu
Using the tools and knowledge of science to solve a problem or build new technology is called...
Answer:
Invention
Explanation:
Scientific ideas can be applied in novel was to solve new scientific problems and create new technology. This process helps to make life easier and better.
The application of scientific knowledge to solve new problems and create new technology is generally referred to as invention.
I need help with this please
Answer:
Not sure ask Estellia
Explanation:
Answer:
h= 4.9
Explanation:
l x w x h = a
7.66 x 3.75 x h = 141
28.725h = 141
Divide both sides by 28.725 to solve for h.
How does your Skeletal and Muscular Systems work together?
Muscles move your bones
Bones move your muscles
Heart pumps blood throughout the body
Your bones protect your muscles
Answer:
Answer would be A, Muscles move your bones
Explanation:
Without the Muscular System, your bones would not be connected properly
Question 3 of 10
Which of the following is an example of a phase change from liquid to solid?
A. Ice melting
B. Water freezing
C. Water evaporating
D. Water condensing
Answer:
the answer is B
Explanation:
B is the answer
