.
Showing a correct numerical setup, determine the percent composition by mass of carbon in baking soda (gram-formula mass - 84 grams per mole).
Answer:
Percentage Mass carbon = 14.3%
Explanation:
Baking soda which is sodium hydrogen bicarbonate has the molecular fomula, NaHCO3.
Atomic masses of each of the component atoms is, Na = 23; H = 1; C = 12; O = 16
Step 1: Molar mass of NaHCO3 = 23 + 1 + 12 + 3*16 = 84 g/mol
Step 2: Percentage mass of Carbon = (atomic mass of Carbon / molar mass of NaHCO3) * 100%
= (12 / 84) *100%
Percentage Mass of carbon = 14.3%
A substance that is made up of more than one atom is called _____.
Answer:
It is called a compound.
Explanation:
Calculating [H.]
DETERMINE THE CONCENTRATION OF HOF EACH SOLUTION
» [OH-] = 1 x 10-IM
CH'] =
» pH = 2
[H] =
» [OH ) = 1 x 10-8 M
(H"]=
» POH= 9
[H] -
Answer:
The answer to your question is given below below:
Explanation:
1. Data obtained from the question:
Concentration of Hydroxide ion, [OH-] = 1x10^-1 M
Concentration of Hydrogen ion, [H+] =..?
The concentration of Hydrogen ion and hydroxide ion are related with the following formula:
[H+] x [OH-] = 1x10^-14
[H+] x 1x10^-1 = 1x10^-14
Divide both side by 1x10^-1
[H+] = 1x10^-14 / 1x10^-1
[H+] = 1x10^-13M
2. Data obtained from the question include:
pH = 2
Hydrogen ion concentration, [H+] =..?
pH = - log [H+]
2 = - log [H+]
-2 = log [H+]
[H+] = antilog (-2)
[H+] = 0.01M
3. Data obtained from the question:
Concentration of Hydroxide ion, [OH-] = 1x10^-8 M
Concentration of Hydrogen ion, [H+] =..?
The concentration of Hydrogen ion and hydroxide ion are related with the following formula:
[H+] x [OH-] = 1x10^-14
[H+] x 1x10^-8 = 1x10^-14
Divide both side by 1x10^-8
[H+] = 1x10^-14 / 1x10^-8
[H+] = 1x10^-6M
4. Data obtained from the question include:
pOH = 9
Hydrogen ion concentration, [H+] =..?
First we shall determine the pH.
The pH and pOH are related with the following formula:
pH + pOH = 14
pH + 9 = 14
Collect like terms
pH = 14 - 9
pH = 5
Now, we can obtain the [H+] as follow:
pH = - log [H+]
pH = 5
5 = - log [H+]
-5 = log [H+]
[H+] = antilog (-5)
[H+] = 1x10^-5M
_________ is a jellylike substance within cells.
Answer:
Cytoplasm
Explanation:
Cytoplasm is a jellylike substance within cells.
Answer: he is right
Explanation:
Will a battery with magnesium (Mg) as the anode and aluminum (Al) work to power a flashlight? Why or why not?
Answer:
Yes because magnesium has a more negative reduction potential than aluminum.
Explanation:
The single factor that will determine whether a battery with magnesium as anode and aluminium as cathode will work or not is the respective electrode potentials of the two elements.
Recall that in a battery, oxidation occur at the anode and reduction occurs that the cathode. The reduction potential shows the ease with which a metal is reduced or oxidized. The substance with the most negative reduction potential will function as the anode while the substance with the less negative electrode potential will function as the anode.
The reduction potential of Magnesium is -2.37 V while that of aluminum is -1.66 V. This implies that magnesium must function as the anode and aluminum as the cathode in order to have a spontaneous electrochemical process in the cell.
how many grams of H20 will be produced by 18g H2
Answer:
160.86 g to the nearest hundredth.
Explanation:
H2 + O ---> H2O
2.016 g H2 produces 18.016 g H2O
1g .. .. .. .. .. 18.016 / 2.016 g H2O
18g .. .. .. .. .. . . (18.016 * 18) / 2.016 g H2O.
= 160.86 g.
Which of the following changes depending on the strength of the gravity
field it is in?
A. None of these
B. Mass
C. Matter
D. Weight
Reset Selection
Answer:
D. Weight
Explanation:
Answer:
Weight
Explanation:
Answer via Educere/ Founder's Education
1. The polymerization of amino acids produces:
organic acids
lipids
proteins
carbohydrates
2. Which group of compounds has a –OH functional group?
aldehydes
esters
carboxyl acids
alcohols
3. Unsaturated compounds _____.
do not readily react
have a high activation energy
require UV light to react
are very reactive
4. Butene would have ____ carbon atoms and a_____ bond.
- 4 - double
- 2 - single
Answer:
1. Proteins
2. Alcohol
3. Unsaturated compounds are very reactive.
4. Butene has 4 carbon atoms and one double bonds attached to it
Explanation:
1. The polymerization of amino acids gives protein.
Polymerization is a process whereby smaller unit molecules of organic compounds combine repeatedly, in a regular fashion to form a larger organic structure or compound.
The smaller units are called monomers while the larger compound formed are called the polymers.
In this case, the smaller units are the amino acids held or linked together by peptide bonds to form a polymer called proteins.
2.
Compounds with functional group of -OH are called alcohols.
Alcohols are also known as alkanols and they belong to a class of organic compounds where -OH functional group is attached to an alkyl group. They have general formula of CₓH₂ₓ₊₁OH where x refers to the number of carbon atom. They're also categorized into primary, secondary and tertiary alcohols based on the type of carbon in the which the functional group (-OH) is attached to.
3.
Unsaturated compounds are very reactive due to the presence of lone pairs of electrons present in them.
4. Butene actually has 4 carbon atoms and several single bonds attached to it.
Butene has a total of 12 bonds and 1π (pi-bond) while several 11σ (sigma bonds) are attached to it.
How many atoms in 8.9 moles of iron
Answer:
5.3578e+24
Explanation:
1 mole = 6.02 x 10^23
6.02 x 10^23 x 8.9 =
5.3578e+24
1.
A car tire was inflated to 75 kPa at the repair shop where the
temperature is 15 °C. What is the pressure of the tire on the trip home
if the temperature of the road surface is 32 °C? (Write your answer
nearest whole number)
kPa
Answer:
THE PRESSURE OF THE TIRE ON THE TRIP HOME AT THE ROAD SURFACE TEMPERATURE OF 32°C IS 160 kPa.
Explanation:
Initial Pressure = 75 kPa
Initial temperature = 15 °C
Final temperature = 32 °C
Final pressure = unknown
Using the combined equation of gases;
P1V1/T1 = P2V2/ T2
Since the tire will have the same volume of air in it showing that volume of constant both at the repair shop and on the road surface.
The relationship between pressure and temperature is used with constant volume.
P1/T1 = P2/ T2
75 kPa / 15 °C = P2 / 32 °C
P2 = 75 kPa * 32 °C / 15 °C
P2 = 2400 kPa °C / 15 °C
P2 = 160 kPa.
So therefore, the pressure of the tire on the trip home when the temperature of the road surface is 32°C is 160 kPa.
I know the correct answer is either a or d. Can anyone explain which one it is and why? CH3C ≡ CCH2CH2Cl is named: a. 1-chloro-3-pentyne b. 5-chloro-2-pentene c. 1-acetylenyl-3-chloropropane d. 5-chloro-2-pentyne
Answer:
D.
Explanation:
CH₃C≡ CCH₂CH₂Cl
Since there are 5 carbons so the suffix used is "pent"
There is a triple bond so its alkyne
So the compound becomes 2-pentyne (2 because the triple bond is with the 2nd carbon)
Then,
The functional group of chlorine is attached with 5th carbon So the compound becomes
5-chloro,2-pentyne
Heptane, pentane and octane are accidentally mixed. They all have different boiling points. Pentane boils at 360 ° C, hexane boils at 690 ° C and octane boils at 12 ° C. What method would you use to separate these liquids? Explain how the method works.
Answer:
Fractional distillation
Explanation:
Heat the mixture upto 700°C
The compuond with low boiling point will evaporate first and the compound with higher boiling point will evaporate last.
An ice freezer behind a restaurant has a freon leak, releasing 41.60 g of C2H2F3Cl into the air every week. If the leak is not fixed, how many kilograms of fluorine will be released into the air over 6 months? Assume there are 4 weeks in a month. mass of fluorine leaked over 6 months:
Water boils at 100°C at sea level. If the water in this experiment did not boil at 100°C, what could be the reason?
Pls help I’m dying plssssssdsssss
Answer:
number 3
Explanation:
What happens to mass in an isolated system?
Answer:
In isolated sysrem mass remains constant.
Explanation:
Answer:
Yes is remains constant
Explanation:
Isolated systems can't make energy or matters come in or out, so the mass stays the same.
Think of it as a marble in a balloon once you tie it and shake the marble in the balloon, there is no extra marbles coming in nor is the marble out of the balloon so that mass(weight is the same.
The type of energy transferred by a wave in a medium is kinetic energy.
Answer:
The statement is true.
Explanation:
The different means by which the energy is transferred is commonly termed to be 'wave'.
Wave refers to the disturbance transmission from a specific point to another. Different sources are involved in this transmission. The vibration of particles helps in the flow of energy from one medium to another. Vibration leads to the formation of kinetic energy flowing from one medium to another.
A moving train comes to a stop at the station. What happened to
make the train change motion?
1)The train experienced an unbalanced force.
2)The train experienced a balanced force.
3)The train would stop with or without forces.
4)The train does not experience forces acting on it.
The table below shows two conclusions about atoms based on experiments by Rutherford and Thompson. Which of these statements best explains why Rutherford and Thompson visualized the atom differently? Atoms of different elements contain different particles. New experimental processes provide new scientific evidence. A single model of an atom cannot be agreed upon by all scientists. Scientists believe in proposing theories which contradict current theories.
Answer:
Scientists with varied experimental processes and interests perceive things differently.
Explanation:
Scientists believe in proposing theories which contradict current theories. So the correct option is D.
What are the atomic models?
Recently, the structure of atoms has been discovered. Before the ideal model of an atom was found, several others were proposed and abandoned.
Atomic Model of J.J. Thomson
In his hypothesis, Thomson compared the definition of an atom to that of a Christmas pudding.He claimed that atoms are made up of a positively charged sphere with embedded electrons.Additionally, he claimed that because the magnitudes of positive and negative charges are equal, an atom as a whole is electrically neutral.
Atomic Model of Rutherford
Rutherford experimented with α-particle scattering on a gold sheet.He noticed that the majority of the negative ions did not deflect when they travelled through the gold foil.Small angles were experienced by certain α-particles, whereas almost 180° was experienced by others.This experiment led Rutherford to the conclusion that an atom's nucleus, a positively charged spherical centre with a radius of 10-10 metres, contains almost all of the atom's mass (having a radius of 10–15 m).
Therefore the correct option is D.
Read more about atomic models, here
https://brainly.com/question/1566330
#SPJ2
What gas is produced by the re
baking soda?
a. oxygen
B. petroleum
С. helium
D. Carbon dioxide
Answer:
D. Carbon dioxide
Explanation:
Explanation:
What gas is produced by the re action of
baking soda?
Baking soda Formula: NaHCO₃
Water Forumula: H2O
Carbon Dioxide Formula: CO2
So I'm going to guess the question was baking soda with water
NaHCo3 + H2O = NaCo3 + H3O
Hmm, nope that's not it.
Maybe it meant decomposition
NaHCO3 = Na2CO3 + H2O + CO2
In which case it would be Carbon Dioxide
hi:)) how to do 5? I’m not sure if it’s hydrogen carbonate or carbonate
Answer:
copper(ll) carbonate
Explanation:
Since the product is a salt which is copper(II) carbonate, water and carbon dioxide, this reaction is an acid + metal carbonate reaction.
Looking at the salt, Cu²⁺ has to be part of the reactants.
Hence, the missing compound there has to be copper(ll) carbonate, CuCO₃.
The balanced chemical equation would be:
CuCO₃ + 2HNO₃➙ Cu(NO₃)₂ +H₂O +CO₂
P.s. You left out CO₂ as a product in Q2 ;)
Just a recap of the main reactions you would've learnt:
1) Acid + base/ alkali ➙ salt + water
2) Acid + metal ➙ salt + hydrogen gas
3) Acid + metal carbonate ➙ salt + H₂O + CO₂
Which statement best describes what the density
of an object represents?
Density is the mass of an object per unit of
length.
Density is the volume of an object of a
certain mass.
Density is the length of an object for a certain
mass.
Density is the amount of matter in a certain
volume.
Answer:
d
Explanation:
edg2020
A 39 foot ladder is resting against a wall that is 36 feet high. What is
the distance between the base of the ladder and the bottom of the wall?
5 feet?
15 feet?
10 feet ?
mixture of 75 cm3of oxygen and 12.5 cm3 of a gaseous hydrocarbon H were exploded in an eudiometer. After cooling to room temperature, 50 cm3 of gas was left and when this was shaken with KOH solution, 12.5 cm3 of oxygen remained. Given that all the volumes were measured at same temperature and pressure, calculate the molar mass of the hydrocarbon H.
Answer:
molar mass of C₃H ₈ = 44 g/mole
Explanation:
Computation of the amount of oxygen that reacts .
⇒ 75 - 12.5
⇒ 62.5 cm³
Computation of proportion of hydrocarbons
2 mole hydrocarbons 3n+1 oxygen
⇒ 3 n + 1 = [62.5 × 2] / 12.5
⇒ 3 n + 1 = 10
⇒ n = 3
So,
Formula of the hydrocarbon is C₃H ₈
Computation of molar mass of C₃H ₈
⇒ [12×3] + [1×8]
⇒ 44 g/mole
hey so for science class im making a brochure for a vacation to mars.
can someone give me a good name and theme for a hotel that would be on mars?
Answer:
The name of the hotel can be the Red dust hotel. And the theme could red and rocky
Explanation:
Plz help me with this question
Guys, please help me and tell me how you found the answer!
If a gas has a pressure of 1.69 atm at a temperature of 300 K, what will the pressure change to if the container is cooled to 100 K?
Also
If a gas has a pressure of 715 mm Hg at the temperature of 500 K, what will the pressure change to if the container is heated to 900 K?
Answer:
The First one is: 0.563atm
The second one is: 1.692atm
Hope this helps!
Explanation: Look at Photo Attached
The pressure has been reduced with the cooling of the container, and the change in pressure has been 1.06 atm. The pressure has been increased with the heating of the container and the change in pressure has been 572 mm Hg.
Assuming the gas has been following the ideal behavior. According to the ideal gas equation,
PV =nRT
If the same gas has been heated, the n and R will be constant, as well as with the constant volume of initial and final pressure, the relationship to the P and T can be given as:
[tex]\rm \dfrac{Initial\;pressure}{Initial\;temperature}\;=\;\dfrac{Final\;pressure}{Final\;temperature}[/tex]
(a) For the gas with an initial pressure of 1.69 atm, the final pressure will be:
[tex]\rm \dfrac{1.69}{300}\;=\;\dfrac{Final\;Pressure}{100}[/tex]
Final pressure = 0.563 atm.
The change in pressure = Initial pressure - Final pressure
The change in pressure = 1.63 - 0.563 atm
The change in pressure = 1.06 atm.
The pressure has been reduced with the cooling of the container, and the change in pressure has been 1.06 atm.
(b) For the gas at initial pressure 715 mm Hg, the final pressure will be:
[tex]\rm \dfrac{715}{500}\;=\;\dfrac{Final\;Pressure}{900}[/tex]
Final pressure = 1,287 mm Hg.
The change in pressure = Final pressure - Initial pressure
The change in pressure = 1,287 - 715 mm Hg
The change in pressure = 572 mm Hg
The pressure has been increased with the heating of the container and the change in pressure has been 572 mm Hg.
For more information about the change in pressure, refer to the link:
https://brainly.com/question/12152879
4. If 175 undecayed nuclei remain from a sample of 2800 nuclei, how many half-
lives have passed? (Show your work.) *
Your answer
Answer:
X = 4
Explanation:
Start 2800
End 175
175 = 2800x(0.5)^X
175/2800 = 0.5^X
0.0625 = 0.5^X
log(0.5 x) = log(0.0625)
x · log(0.5) = log(0.0625)
-0.301x = -1.204
x = -1.204/-0.301
x = 4
How many moles are in 255 mL of a 2.35 M solution of H2SO4?
Answer:
.59925 moles
Explanation:
In the reaction:
CO3²- + H+ --> HCO³-
The CO3²- ion is considered a base because it
1) accepts a proton
2) accepts an electron
3) donates a proton
4) donates an electron
Thanks! :)
Answer:
1) accepts a proton
Explanation:
CO₃⁻² is a base here because it is accepting a proton ( H⁺) through coordinate bonding by donating a pair of electron .
So option (1) is correct .
