Answer:
The electron from the ground state to occupy a next energy level. In this case,we say that the electron is excited
Câu 1: Trong các dung dịch sau, dung dịch nào làm quỳ tím đổi màu xanh?
A. HCl B. H2SO4 C. NaOH D. NaCl
Câu 2: Bazơ nào dưới đây là bazơ không tan?
A. KOH B. NaOH C. Cu(OH)2 D. Ca(OH)2
Câu 3: Trong các chất sau đây, chất nào không phải là muối?
A. HCl B. KCl
C. NaOH
C. Cu (OH)
A. HCl
At what approximate temperature and pressure can all three phases of water exist simultaneously?
0°C, 760 mmHg
0°C, 5 mmHg
80°C, 380 mmHg
100°C, 760 mmHg
Answer:
0⁰c , 5 mmHg
Explanation:
Because at this temperature we all know water can be in state of both solid and liquid and when pressure is decreased it can be in form of gas too
A compound was found to contain 90.6% lead (Pb) and 9.4% oxygen. What is the empirical formula for this compound?
Answer:
the answer is 47.9 and ik because I just had that question
The empirical formula of the compound is O₄Pb₃.
What is the empirical formula?
An Empirical system is the chemical system of a compound that offers the proportions of the elements gifted within the compound however not the real numbers or arrangement of atoms. This would be the lowest complete variety ratio of the elements within the compound.
Amount of lead (Pb) = 90.6%
⇒and amount of oxygen = 9.4%
taking the whole number ratio
o = 4
Pb = 3
∴ ⇒O: Pb=4:3
O4Pb3 answer.
Learn more about empirical formula here:-https://brainly.com/question/1603500
#SPJ2
Please help I have been stuck on this problem for a couple hours and can't figure it out
Answer:
11.92 Liters O₂(g) at STP
Explanation:
For most stoichiometry problems, if one will convert all given data into moles, solve by rxn ratios, then finish by converting to needed dimensions to complete problem.
2Pb(NO₃)₂ => 2PbO + 4NO₂ + O₂
Given 237.5 grams PbO formed in reaction = 237.5 g/223.2 g/mole = 1.064 mole PbO
From equation ratios, moles O₂ formed = 1/2(moles PbO) = 1/2(1.064 moles O₂) = 0.532 mole O₂
0.532 mole O₂ = 0.532 mole x 22.4 liters/mole at STP = 11.91756272 liters (calculator answer) ≅ 11.92 liters O₂ at STP (4 sig.figs. based on given 237.5g PbO)
Which factor would speed up a chemical reaction? (Choose all that apply)
Decreasing particle size
Increasing the temperature
Decreasing the temperature
Increasing particle size
Answer:
Increasing the temperature
Increasing particle size
Explanation:
Increasing the temperature allows for particles and molecules to move faster (because there is an increase in energy) and allows for more collisions.
∴ Increasing the temperature would be an answer.
Increasing the particle size allows for more surface area and a greater chance for particles to collide with each other.
∴ Increasing particle size would be an answer.
Topic: AP Chemistry
Unit: Kinetics
****************************************************************
******************* ijustwantthepoints *************************
Which statement best describes how forces are important to chemistry?
A. Forces are transferred when atoms form ions.
B. Forces are released during chemical reactions.
C. Forces determine the extent of a reaction.
D. Forces hold atoms and molecules together.
Answer:
D
Explanation:
is (H) a positive or negative value
Answer:
A chemical reaction that has a positive ΔH is said to be endothermic , while a chemical reaction that has a negative ΔH is said to be exothermic . What does it mean if the ΔH of a process is positive? It means that the system in which the chemical reaction is occurring is gaining energy.
What is Spontaneous ion
When a compound is added to water only a few of its molecules dissociate to produce hydrogen ions. It is a...
a. strong acid.
b. weak acid.
c. strong base.
d. weak base.
Name three metals on the periodic table and their uses
PLS HELP
QUICK PLEASE!!!
Argon is an element in the last column of the periodic table. What is its highest energy sublevel?
A.D
OB.
OC.P
DS
The highest energy sublevel of argon will be p.
ArgonArgon has an atomic number of 18.
Thus, the electron configuration of argon will be [tex]1s^2, 2 s^2, 2 p^6, 3 s^2, 3 p^6[/tex]
The ascending order of energy for the sublevel orbitals is s, p, d, and f.
Therefore, the highest energy sublevel of argon is p.
More on the energy sublevel can be found here: https://brainly.com/question/13657440
#SPJ1
The highest energy sublevel in the element argon is p.
What is the periodic table?The periodic table is an arrangement of atoms according to their order of increasing atomic numbers. Now we know that there are 18 groups in the periodic table and argon belongs to group 18.
The electron configuration of argon is; 1s2 2s2 2p6 3s2 3p6. Thus, the highest energy sublevel in the element argon is p.
Learn more about argon:https://brainly.com/question/133359
#SPJ1
A chemist sets up a chemical reaction but finds that none of the reactant molecules have the required activation energy. What is the result?
A.
Products will form with less energy input.
B.
No products will be formed.
C.
The products will form too quickly.
D.
Products will convert to reactants.
Answer:
B.
No products will be formed.
Type the correct answer in the box. Express your answer to two significant figures. You are performing a reaction with 1.7 moles of hydroiodic acid and 3.43 moles of zinc bromide: 2HI + ZnBr2 → 2HBr + ZnI2. How many moles of zinc iodide can be made? The theoretical yield is moles of zinc iodide.
Answer:
1.34 34343 he did
Explanation:
i did the test
Answer:
0.85
Explanation:
0.2g of water represents how many mole?
Answer:
0.0111moles
Explanation:
as moles = mass/ mr(16+1+1)
so 0.2g / 18
gives you 0.111moles
hope this helps :)
What is the chemical formula of potassium manganate vii
Answer:
Explanation:Visit this site for any assignments assistance
https://eiwriter.com/
The density of water is 1 g/cm3. Brent used the following method to convert 1 g/cm3 to kg/m3. An equation is shown. The expression on the left has three terms separated by the multiplication sign. The first term is 1 g by 1 cubic cm. The second term is 1 kg by 1000 kg. The third term is 100 cm raised to the power of 3 divided by 1 m raised to the power of 3. The number on the right of the equal to sign is 1000 kg per cubic meter. (1 kg = 1,000 g and 1 m = 100 cm) What is the error in Brent's conversion method?
Answer:
The error includes;
a) The wrong denominator for the equivalent fraction of kilograms to grams
b) The use of the scale factor of length rather than the scale factor of volume for the equivalent fraction of cubic centimeters to cubic meters
c) The arrival at the correct 1000 kg/m³ rather than 0.1 g/m³ based on the expression on the left of the equation
Explanation:
The density of water = 1 g/cm³
The given equation is presented as follows;
1 g/cm³ × 1 kg/(1000 kg) × 100 cm³/(1 m³) = 1000 kg/m³
The error in the conversion method are;
a) The conversion, 1 kg/(1,000 kg) has an error, the correct conversion is (1 kg)/1,000 g)
b) The volume conversion error, 100 cm³/(1 m³), the correct volume conversion is (100 cm)³/(1 m³) = 1,000,000 cm³/(1 m³)
c) The right of the equal to sign error; using the left side expression only, the (wrong) answer is 0.1 g/m³
The correct equation is presented as follows;
1 g/cm³ × 1 kg/(1000 g) × 1,000,000 cm³/(1 m³) = 1000 kg/m³
Answer:
C. 1,000 kg should be written as 1,000 g.
Explanation:
Got it right on my test :)
Tenemos una disolución de HNO3 cuya pureza es del 65% y tiene una densidad de 1.32 g/mL. ¿Cuál es la molaridad de la disolución? PM HNO3 = 63.0 g/mol.
Teniendo en cuenta que la molaridad es el número de moles de soluto que están disueltos en un determinado volumen, la molaridad de la disolución de HNO₃ es 14.67 [tex]\frac{mol}{L}[/tex].
El porcentaje en masa o en peso de una disolución es el número de gramos de soluto que hay por cada 100 gramos de disolución.
Entonces una pureza de 65% indica que hay 70 g de HNO₃ puro por cada 100 g de HNO₃ impuro.
Por otro lado, la densidad es la relación entre el peso o masa de una sustancia y el volumen que ocupa esa misma sustancia.
Entonces, si la disolución de HNO₃ tiene una densidad de 1.32 g/mL (equivalente a 1320 g/L), donde la cantidad de masa es impura, se puede obtener la cantidad de masa de HNO₃ presente 1 L de la solución mediante el siguiente cálculo:
[tex]\frac{1320 g HNO_{3} impuro}{1 L}x \frac{70 g HNO_{3}puro}{100 g HNO_{3}impuro}= 924 \frac{g HNO_{3}puro}{L}[/tex]
Finalmente, la masa molar de HNO₃, es decir la masa presente en un mol de la sustancia, es 63 [tex]\frac{g}{mol}[/tex].
Entonces, teniendo en cuenta que la molaridad es el número de moles de soluto que están disueltos en un determinado volumen, es posible determinar la molaridad como:
[tex]\frac{924 g HNO_{3}puro}{L}* \frac{1 mol}{63 g}= 14.67 \frac{mol}{L}[/tex]
En resumen, la molaridad de la disolución es 14.67 [tex]\frac{mol}{L}[/tex]
Aprende más sobre la molaridad:
https://brainly.com/question/17647411?referrer=searchResultshttps://brainly.com/question/21276846?referrer=searchResultssolubility of salt at 10 degree Celsius is 20 how does it what does it means what happens if the temperature of saturated solution is increased and decreased explain it in detail
Answer:
solubility of salt at 10 degree Celsius is 20 how does it what does it means what happens if the temperature of saturated solution is increased
Explanation:
solubility of salt at 10 degree Celsius is 20 how does it what does it means what happens if the temperature of saturated solution is increased
list from soft to hard
List the following minerals in order from softest to hardest:
apatite, calcite, talc, quartz, diamond.
What is the AHsol for LiF → Lit + F-? The lattice energy is -1,036 kJ/
mol, the enthalpy of hydration for Lit is -499
kJ/mol, and the enthalpy of hydration for F-is-431 kJ/mol. Use A Hooi = -A Hat + AHhydr.
0-968 kJ/mol
-106 kJ/mol
106 kJ/mol
1,966 kJ/
mol
The heat of hydration is defined as the heat absorbed or evolved when one mole of a substance undergoes hydration. The heat of solution is the enthalpy change associated with he dissolution of a solute. The lattice energy is the heat. Lattice energy is the energy released when the components of the lattice are brought together from infinity.
Hence the heat of solution for LiF → Li^+ + F- is -1966 kJ/mol
Given that;
Heat of hydration = ΔH solution – ΔH lattice energy
Where,
ΔH solution = Heat of the solution
ΔH lattice energy = Lattice energy of the solution
The heat of solution or enthalpy of dissolution is defined as the enthalpy change associated with the dissolution of a solute in a solvent
From the formula above;
ΔH solution = Heat of hydration + ΔH lattice energy
Heat of hydration = [(-431) + (-499)] = -930 kJ/mol
ΔH solution = (-930) + (-1,036) = -1966 kJ/mol
Hence the heat of solution for LiF → Li^+ + F- is -1966 kJ/mol
https://brainly.com/question/13526282
Can Some One Please Help Me
Answer:
12 g
Explanation:
From the question given above, the following data were:
Number of atoms = 6.02×10²³ atoms
Mass of ₆C¹² =?
From Avogadro's hypothesis,
1 mole of any substance contains 6.02×10²³ atoms. This implies that 1 mole of ₆C¹² also contains 6.02×10²³ atoms i.e
1 mole of ₆C¹² = 6.02×10²³ atoms
Recall
From the period,
1 mole of ₆C¹² = 12 g
Thus,
12 g of ₆C¹² = 6.02×10²³ atoms
Therefore, 12 g of ₆C¹² contains 6.02×10²³ atoms
Câu 6: Cho 4,2 gam este đơn chức no E tác dụng hết với dung dịch KOH ta thu được 4,76
gam muối natri. Vậy công thức cấu tạo của E có thể là:
En una carrera de atletismo un deportista se muestra agotado sin fuerzas para continuar y decide abandonar la carrera ¿Que alimentos tomo antes de la carrera ?
Answer:
Los alimentos para evitar la fatiga durante una carrera son alimentos bajos en grasas y altos en carbohidratos, así como alimentos bajos en fibra como pan, mantequilla de maní, plátano, jugo de frutas sin pulpa, y beber hasta aproximadamente 600 ml de líquido aproximadamente 3 horas. antes de la carrera
La comida para comer unos días antes de la carrera incluye carnes magras, arroz, pasta y verduras con contenido de almidón.
Los alimentos que se deben evitar incluyen carne roja, alimentos con alto contenido de grasas saturadas, alimentos fritos, pasteles y salchichas.
Explanation:
What is the pH value of lithium chloride?
Answer:
0.0003HERE IS YOUR ANSWERSuggest a way that a scientist could create an even more accurate model of universe expansion
Answer:
Between galaxies, retake the measurement.
Explanation:
Among both galaxies, reiterate the measurements. Instead of utilising a balloon, a scientist might create a model that shows in which everything really is and how cosmos is expanding rather than expanding. By inflating up the atmosphere to 1/2, 3/4, and full size, continue the operation.
I need help with question 2
Answer:
here's the answer to your question
Which of the following pairs of elements will form ionic bonds with each
other?
A. Silver (Ag) and silver (Ag)
B. Lithium (Li) and iodine (1)
C. Bromine (Br) and bromine (Br)
D. Carbon (C) and chlorine (CI)
Answer:
B. Lithium (Li) and iodine (1)
Explanation:
Ionic bond is a type of chemical bond that is formed between a metallic element and a non metallic element. The positive charge of the metallic ion is attracted to the negative charge of the non metallic ion to form an ionic bond.
According to the options given in this question, lithium and iodine will form an IONIC bond because lithium is a cation (+ve ion) while iodine is an anion (-ve).
PLZ HELP ME WITH MY WORK
Answer:
Explanation:
pretty sure its mixure.
Propane can be cracked to produce propane and hydrogen. Complete the symbol equation for the reaction.
Answer:
Explanation:
C3H8= C3H6 +H2