A secondary active transport process that cotransports an amino acid with Na+ is an example of a symport mechanism, in which both molecules move in the same direction across the cell membrane.
A secondary active transport process that cotransports an amino acid with Na+ is an example of a symport mechanism, in which both molecules move in the same direction across the cell membrane. Specifically, this type of transport involves the coupling of the energy stored in the electrochemical gradient of Na+ to the uphill transport of an amino acid against its concentration gradient. As Na+ flows down its concentration gradient into the cell, it drives the movement of the amino acid into the cell as well. This type of transport is known as secondary because it indirectly uses energy stored in the electrochemical gradient of Na+ to drive the movement of the amino acid, rather than directly using ATP hydrolysis like primary active transport mechanisms.
To learn more about cell membrane:
https://brainly.com/question/13524386
#SPJ4
Which one of the following amino acids is MOST likely to participate in hydrogen bonding with water?
valine
alanine
leucine
asparagine
phenylalanine
Asparagine is the amino acid most likely to form a hydrogen bond with water (Asn).
The side chain of asparagine has an amide functional group (-CONH-), which can serve as both a hydrogen bond donor and acceptor. As a result, asparagine is more hydrophilic (loves water) than the other amino acids listed because it may interact with water molecules via hydrogen bonding. The amino acids valine (Val), leucine (Leu), and phenylalanine (Phe) are hydrophobic (averse to water) because they lack functional groups on their side chains that can form hydrogen bonds with water. The side chain of the amino acid alanine (Ala) has a methyl functional group (-CH3) that is hydrophobic and does not engage in hydrogen bonding. As a result, asparagine is the amino acid that has the highest likelihood of forming a hydrogen bond with water.
Learn more about hydrogen bond here:
https://brainly.com/question/10904296
#SPJ4
Which of the following is a molecular formula?
C₂H₁₁
P4010
C₂H₁₂O
P₂O5
The option that exemplifies a molecular formula is [tex]P_4O_{10[/tex].
What are molecular formulas?A molecular formula is a chemical formula that represents the number and type of atoms present in a molecule. A molecular formula specifies the exact number of atoms of each element in a molecule, which can help to identify the type of molecule and its composition.
Molecular formulas are unique from empirical formulas. Empirical formulas are the simplest formulas that show the atoms present in a compound in their simplest whole-number ratios.
Thus, C₂H₁₁, C₂H₁₂O, and [tex]P_2O_5[/tex] are all empirical formulas while [tex]P_4O_{10[/tex] is a molecular formula.
More on molecular formulas can be found here: https://brainly.com/question/1247523
#SPJ1
glassware should always be dry when using a grignard reagent. if the reagent below (phenylmagnesium bromide) reacts with any water present, what neutral organic product will be formed?
A Grignard reagent called phenylmagnesium bromide will combine with water to create the neutral organic compound benzene. Grignard reagents are highly reactive with water and other protic solvents, which causes this reaction.
Bromophenylmagnesium, sometimes referred to as phenylmagnesium bromide, is an organometallic substance having the formula C6H5MgBr. It belongs to the family of Grignard reagents, a class of popularly used organometallic compounds in organic synthesis. A white crystalline solid, phenylmagnesium bromide is strongly reactive with a wide range of electrophiles, such as carbonyl compounds, esters, and acid chlorides. It is frequently utilised in the synthesis of a variety of medicines, agrochemicals, and natural products as well as in the production of carbon-carbon bonds in organic chemistry. But it needs to be managed carefully and cautiously because of how reactive it is.
Learn more about phenylmagnesium bromide here:
https://brainly.com/question/13864374
#SPJ4
A high altitiude balloon contains 30.0 L of He gas at 103kPa. What is the volume when the balloon rises to an altitiude where the pressure is only 25.0kPa? Assume the temp is constant. (BOYLES LAW) 15 points pls help
124 L is the correct answer
Thus, the volume of the helium is 124 L when the balloon rises to an altitude where the pressure is only 25 kPa.
What is temperature ?
Temperature is a measure of the thermal energy of a substance or system. It reflects the degree of hotness or coldness of a material, and is a crucial parameter in many physical and biological systems. It is usually measured in units of kelvins, Celsius, or Fahrenheit. The Kelvin scale is an absolute temperature scale, where 0 K represents absolute zero, the temperature at which all matter has no thermal energy. The Celsius and Fahrenheit scales are relative temperature scales, with 0°C and 32°F defined as the freezing point of water and 100°C and 212°F defined as the boiling point of water.
To learn more about temperature, click the given link,
https://brainly.com/question/25677592
#SPJ1
Calculate the volume occupied by 8 g methane at 40 C and 842 torr pressure ?
Answer:
jjijjĵjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjhh
Explanation:
ju8uhtyù
in the experiment, you are instructed to use 10 ml of a 5% solution of adipoyl chloride and 10 ml of a 5% solution of hexamethylenediamine. assuming these solutions are %volume/volume, calculate the mmol of each reagent that will be used in the experiment. which reagent is the limiting reagent?
The moles of adipoyl chloride 3.4 mmol and the moles of hexamethylenediamine is 3.8 mmol. The reagent is the limiting reagent is the adipoyl chloride .
The 5% v/v adipoyl chloride means that 5 mL of the adipoyl chloride in the 100 mL of solution
10mL of adipoyl chloride solution = (5mL× 10mL)/100mL
= 0.5mL
The density = 1.26 g/mL
The mass of the adipoyl chloride = density × volume
= 1.26 × 0.5
= 0.63 g
The moles of adipoyl chloride = mass / molar mass
= 0.63 / 183
= 0.0034 mol = 3.4 mmol
The mass of the hexamethylenediamine = density × volume
= 0.89 × 0.5
= 0.445 g
The moles of the hexamethylenediamine = 0.445 / 116
= 0.0038 mol = 3.8 mmol
To learn more about moles here
https://brainly.com/question/26416088
#SPJ4
calculate the ph of a buffer solution made from equal amounts of 0.3 m hydrofluoric acid and 0.7 m sodium fluoride
A buffer solution with a pH of 4 is created by mixing 0.3 m hydrofluoric acid and 0.7 m sodium fluoride in equal parts.
To calculate the number of moles of HF and F-,
moles HF = molarity * volume
= 0.3 * 1 L = 0.3 moles
moles F- = molarity * volume
= 0.7 m * 1L = 0.7 moles
by using the ICE table :
HF(aq) + NaOH(aq) → NaF(aq) + H2O(l)
initial 0.3 0 0.7
change -0.08 0.08 + 0.08
Equ (0.3 - 0.08) (0.7+0.08)
∴ [HF] = 0.3 - 0.08 = 0.22 m
∴[F-] = 0.7 + 0.08 = 0.78 m
when we have Ka for HF = 3.5 x 10⁻⁴
∴Pka = - ㏒ Ka
= - ㏒ (3.5x10⁻⁴)
= 3.46
by using the PH formula :
PH = Pka + ㏒[F-]/[HF]
by substitution:
∴PH = 3.46 + ㏒( 0.78 / 0.22)
∴PH = 4
first, we have to get moles of HF & F-
moles HF = molarity * volume
= 0.3 * 1 L = 0.3 moles
moles F- = molarity * volume
= 0.7 m * 1L = 0.7 moles
by using the ICE table :
HF(aq) + NaOH(aq) → NaF(aq) + H2O(l)
initial 0.3 0 0.7
change - 0.08 0.08 + 0.08
Equ (0.3 - 0.08) (0.7+0.08)
∴ [HF] = 0.3 - 0.08 = 0.22 m
∴[F-] = 0.7 + 0.08 = 0.78 m
when we have Ka for HF = 3.5 x 10 ⁻⁴
∴Pka = - ㏒ Ka
= - ㏒ (3.5x10⁻⁴)
= 3.46
by using the PH formula :
PH = Pka + ㏒[F-]/[HF]
by substitution:
∴PH = 3.46 + ㏒( 0.78 / 0.22)
∴it is the buffer solution PH = 4
Learn more about buffer solution here:
https://brainly.com/question/15709146
#SPJ4
weak acid (carbonic acid) results when group of answer choices ozone is dissolved in water carbon dioxide is dissolved in water nitrogen is dissolved in water water contains no impurities
Weak acid (carbonic acid) results when Nitrogen dioxide is dissolved in water contains no impurities.
Carbonic acid is a carbon- containing emulsion which has the chemical formula H2CO3. results of carbon dioxide in water contain small quantities of this emulsion. Its chemical formula can also be written as OC( OH) 2 since there exists one carbon- oxygen double bond in this emulsion.
Carbonic acid is frequently described as a respiratory acid since it's the only acid that's exhaled in the gassy state by the mortal lungs.
Nitrogen dioxide is a chemical emulsion with the formula NO2. It's one of several nitrogen oxides. NO2 is an intermediate in the artificial conflation of nitric acid, millions of tons of which are produced each time for use primarily in the product of diseases. At advanced temperatures it's a sanguine- brown gas.
Learn more about Weak acid:
https://brainly.com/question/29035097
#SPJ4
4. you have been asked to generate 100 ml of the binding buffer for the affinity purification protocol you completed in lab. that buffer is composed of 100 mm tris-hcl and 150 mm nacl. what mass of each reagent is needed? briefly describe how to make the buffer. show your work
157.6 g of Tris-HCl to make 100 ml of the binding buffer with a concentration of 100 mM.
To make 100 ml of the binding buffer with 100 mM Tris-HCl and 150 mM NaCl, we first need to calculate the amount of each reagent required. The molecular weight of Tris-HCl is 157.6 g/mol, and the molecular weight of NaCl is 58.44 g/mol.
To calculate the mass of Tris-HCl required, we can use the formula:
mass = (concentration x volume x molecular weight) / 1000
where concentration is in mM, volume is in ml, and the molecular weight is in g/mol.
Substituting the given values, we get:
mass of Tris-HCl = (100 mM x 100 ml x 157.6 g/mol) / 1000 = 157.6 g
Therefore, we need 157.6 g of Tris-HCl to make 100 ml of the binding buffer with a concentration of 100 mM.
To calculate the mass of NaCl required, we can use the same formula:
mass = (concentration x volume x molecular weight) / 1000
Substituting the given values, we get:
mass of NaCl = (150 mM x 100 ml x 58.44 g/mol) / 1000 = 87.66 g
Therefore, we need 87.66 g of NaCl to make 100 ml of the binding buffer with a concentration of 150 mM.
To make the buffer, we can follow the following steps:
Weigh out 157.6 g of Tris-HCl and 87.66 g of NaCl using a balance and add them to a beaker.Add approximately 80-90 ml of distilled water to the beaker.Stir the solution until the solids are completely dissolved.Adjust the pH of the solution to the desired value, which is typically around pH 7.5 for Tris-HCl buffer. This can be done by adding small amounts of either hydrochloric acid or sodium hydroxide and checking the pH with a pH meter or pH paper.Once the pH is adjusted, bring the solution up to the final volume of 100 ml with distilled water.The buffer is now ready to use for affinity purification.Learn more about buffers at
https://brainly.com/question/28297956
#SPJ4
what is the chance that the first five letters can form the word apple, by rearrangement if necessary?
The chance that the first five letters can form the word apple, by rearrangement if necessary, is 1/120.
This is because there are 120 different permutations of the letters a, p, p, l, e, and only one of those permutations forms the word apple. Thus, the probability of forming the word apple is 1/120.
Combination and permutation both refer to the arrangement of objects, while taking a specific number of objects at once (arrangement does not matter in combination). then use the appropriate formula as necessary. Letter arrangement is called permutation. However, avoid using multiple letters in a row. Use the same procedure whether one, two, or any other number of letters appear repeatedly. Additionally, never attempt to determine the value of a factorial of a huge integer.
To learn more about rearrangement click here https://brainly.com/question/29668964
#SPJ4
6) Using the following balanced equation 2Mg(s) + O2(g) → 2MgO(s)
a) How many moles of product would be produced by complete reaction of 0.15 moles of magnesium? (Be sure to
show your work including the mole ratio you used)
A single M&M has a mass of 0.89g. If the formula of chocolate is C7H8N4O2, how many molecules are in an M&M?
Answer:
3x10^21molecules
Explanation:
convert 0.89g to a mole by finding the molar mass of C7H8N4O2. Divide 0.89 by 180g(molar mass) then multiply it by 6.02x10^23 and it equals 2.9766x10^21 on the calculator and you round to the nearest sig fig.
what mass in grams of ch3oh would need to be added to 270g of water in order to lower freezing point
30.7 g of CH3OH would need to be added to 270 g of water to lower its freezing point by 1.0 °C.
To determine the mass of CH3OH needed to lower the freezing point of 270g of water, we need to use the freezing point equation:
ΔT = Kf·m
To calculate the molality of the solution, we need to convert the mass of water to kilograms:
mass of water = 270 g = 0.27 kg
Since we are assuming that only CH3OH is being added to the water, the number of moles of CH3OH can be calculated using its mass and molar mass:
molar mass of CH3OH = 32.04 g/mol
moles of CH3OH = mass of CH3OH / molar mass of CH3OH.
using the freezing point :
ΔT = Kf·m
ΔT = [tex]T_{f}[/tex] - T0
where [tex]T_{f}[/tex] is the freezing point of the solution and T0 is the freezing point of pure water (0 °C).
Since we want to lower the freezing point of water, ΔT is negative, so we can rearrange the equation to solve for the mass of CH3OH:
mass of CH3OH = (ΔT / Kf) · molar mass of CH3OH · mass of solvent
Substituting the known values:
ΔT = -1.86 °C (the freezing point for a 1-molal solution of any solute in water)
T0 = 0 °C
molar mass of CH3OH = 32.04 g/mol
mass of solvent = 270 g = 0.27 kg
We can solve for m by rearranging the molality equation:
m = moles of solute/mass of solvent (in kg)
ΔT = Kf·m
-1.0 °C = (1.86 °C·kg/mol) · m
m = -0.538 mol/kg
Substituting the values into the mass equation:
mass of CH3OH = (-1.0 °C / (1.86 °C·kg/mol)) · 32.04 g/mol · 0.27 kg / (-0.538 mol/kg)
mass of CH3OH = 30.7 g
Therefore, 30.7 g of CH3OH would need to be added to 270 g of water to lower its freezing point by 1.0 °C.
learn more about molar mass here:
https://brainly.com/question/22997914
#SPJ4
If 4.67 mol of ethane (C2H6) undergo combustion according to the unbalanced equation C2H6 + O2 −→ CO2 + H2O , how many moles of O2 is required? Answer in units of mol.
Taking into account the reaction stoichiometry, 16.345 moles of O₂ are required if 4.67 mol of ethane undergo combustion.
Reaction stoichiometryThe balanced reaction is:
2 C₂H₆ + 7 O₂ → 4 CO₂ + 6 H₂O
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
C₂H₆: 2 molesO₂: 7 molesCO₂: 4 molesH₂O: 6 molesMoles of O₂ requiredThe following rule of three can be applied: If by reaction stoichiometry 2 moles of C₂H₆ react with 7 moles of O₂, 4.67 moles of C₂H₆ react with how many moles of O₂?
moles of O₂= (4.67 moles of C₂H₆× 7 moles of O₂) ÷2 moles of C₂H₆
moles of O₂= 16.345 moles
Finally, 16.345 moles of O₂ are required.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
#SPJ1
The groundwater system will heat the school more because it uses so much more water than the other system, even though its water is not as warm as in the other system. For things at the same temperature, the thing with more molecules has more total kinetic energy (thermal energy) than the thing with fewer molecules
the groundwater system, the temperature of the water may be lower than that of the other system, but the total thermal energy (i.e., the sum of the kinetic energy of all the water molecules) can still be higher due to the larger volume of water being used
The temperature of a substance is a measure of the average kinetic energy of its molecules, and it does not depend on the number of molecules. Therefore, if two objects have the same temperature, they have the same average kinetic energy per molecule, regardless of the number of molecules.
However, the actual amount of heat transferred to the school depends on the temperature difference between the water and the building, as well as the rate of flow of the water.
It is important to note that the amount of energy needed to heat a space also depends on the thermal insulation and other factors, such as the air temperature, humidity, and solar radiation. Therefore, it is not accurate to say that the groundwater system will necessarily heat the school more than the other system, based solely on the amount of water being used.
Learn more about temperature here:
https://brainly.com/question/15267055
#SPJ4
the compound lead nitrate is a strong electrolyte. write the transformation that occurs when solid lead nitrate dissolves in water.
The lead nitrate [tex]PB (NO_{3})_{2}[/tex] is soluble in water. It will dissociate into [tex]Pb^{2+}[/tex] (aq) ion and [tex]NO_{3}^{-}[/tex] ion.
Reaction
[tex]Pb(NO_{3})_{2} (s) + H_{2}O (l) - > Pb^{2+} (aq) + 2NO_{3}^{-} (aq)[/tex]
Lead(II) nitrate is an inorganic compound with the chemical formula Pb(NO₃)₂. It commonly occurs as a colorless crystal or white powder and, unlike most other lead(II) salts, is soluble in water.
What is lead nitrate used for?
Lead Nitrate is a white or colorless, sand-like solid. It is used in making matches and special explosives, in the dye and photography industries, and in process engraving. List because it is cited by OSHA, ACGIH, DOT, NIOSH, NTP, DEP, IARC and EPA.
To know more about Lead nitrate, visit: brainly.com/question/26980915
#SPJ4
the attractive force between water molecules that results from hydrogen bonding is called__________
The attractive force between water molecules that results from hydrogen bonding is called hydrogen bonding.
Hydrogen bonding is a type of intermolecular force that arises when hydrogen atoms are covalently bonded to atoms of high electronegativity, such as oxygen, nitrogen, and fluorine. These hydrogen bonds form strong attractions between the molecules, giving water its high surface tension and other unique properties. These hydrogen bonds form strong attractions between the molecules, giving water its unique properties such as high surface tension, high boiling point, and low vapor pressure. Hydrogen bonding is responsible for the stability of many biological molecules such as DNA and proteins, and for the increased solubility of many compounds in water.
To know more about hydrogen bonding please refer:
https://brainly.com/question/17659933
#SPJ4
if you begin with the highest amount of available entropy, which phase change would represent a decrease in entropy?
Entropy and the disorder of the substance both diminish as a result of a phase transition from a liquid to a solid (freezing) or from a gas to a liquid (condensation).
Entropy rises with temperature as well as when a substance transforms from a solid to a liquid to a gas. Because they may move about the most freely, gases have the highest entropy levels. As a result of the phase melting, which results in a larger internal energy change, the entropy changes during phase transition increase. The transition from a gaseous or liquid phase to a solid phase occurs when the phase is moving toward lower internal energy, which results in a drop in the system's entropy.
Learn more about entropy here:
https://brainly.com/question/13146879
#SPJ4
which of the following should be most soluble in water? group of answer choices o2(g) vitamin a (a mostly nonpolar molecule) i2(s) vitamin c (a very good hydrogen bonder) c6h6(l)
The following are soluble in water;
vitamin c
How do you determine solubility in water?The solubility of a substance in water refers to the amount of the substance that can dissolve in a given amount of water at a specific temperature and pressure.
The solubility of a substance can be determined by conducting an experiment in which a known amount of the substance is added to a known amount of water, and the mixture is stirred until no more of the substance can dissolve. The concentration of the dissolved substance can then be determined by measuring its mass, volume or concentration using a suitable method.
Learn more about water:https://brainly.com/question/28465561
#SPJ1
What are the reasons for washing a precipitate in gravimetric analysis?
Washing the precipitate is important for ensuring the accuracy and precision of the gravimetric analysis.
Gravimetric analysis is a quantitative analytical method that involves the determination of the mass of a substance of interest through precipitation, filtration, washing, and drying. Washing a precipitate is an important step in this process and is done for several reasons, including:
To remove any impurities: During the precipitation step, other substances may also be present in the solution that can become trapped in the precipitate. Washing the precipitate removes these impurities and ensures that the measured mass accurately reflects the substance of interest.
To remove any excess reagents: After precipitation, there may be excess reagents that were used to initiate the reaction. If these reagents are not removed, they can affect the mass of the precipitate and thus affect the accuracy of the measurement.
To learn more about Gravimetric analysis :
https://brainly.com/question/6178384
#SPJ4
the mass of a proton is 1.0074 amu, the mass of a neutron is 1.0087 amu, and the mass of an electron is 0.00054858 amu. given this information, what can you predict for the mass of a single atom of 3h (tritium)?
It will have a mass of 3.025 amu. This is because the mass of a tritium atom is made up of the mass of one proton, two neutrons, and three electrons.
The mass of a single atom of 3H (tritium) can be predicted by adding the mass of the three protons, three neutrons, and three electrons in the atom. Since a single atom of 3H (tritium) contains 3 protons, 3 neutrons, and 3 electrons, the mass of a single atom of 3H (tritium) can be calculated by adding the mass of each of these particles together.
The mass of a single atom of 3H (tritium) can be calculated using the equation:
Mass of 3H (tritium) = [tex](3 * Mass of Proton) + (3 * Mass of Neutron) + (3 * Mass of Electron)[/tex]
Mass of 3H (tritium) =[tex](3 *1.0074 amu) + (3 *1.0087 amu) + (3 * 0.00054858 amu)[/tex]
Mass of 3H (tritium) = [tex]3.0218 amu[/tex]
Therefore ,he mass of a single atom of 3h (tritium) is 3.0218 amu
learn more about tritium Refer:brainly.com/question/13559964
#SPJ4
complete question:the mass of a proton is 1.0074 amu, the mass of a neutron is 1.0087 amu, and the mass of an electron is 0.00054858 amu. given this information, what can you predict for the mass of a single atom of 3h (tritium)?
it will have a mass of exactly 3 amu
it will have a mass of 1.008 amu
it will have a mass of 3.025 amu
it will have a mass somewhat greater than 3.025 amu
it will have a mass somewhat less than 3.025 amu
imagine a population that is polymorphic at the a locus. if the frequency of the a allele is 80% and the frequency of the a allele is 20%, what proportion of the population would you expect be heterozygotes?
You would anticipate that heterozygotes would make up 0.0016 of the population. if the an allele frequency is 20% and the an allele frequency is 80%
AA × AA = 0.4096
AA × Aa = 0.4096
AA × aa = 0.0512
Aa × Aa = 0.1024
Aa × aa = 0.0256
aa × aa = 0.0016
The genotype of the organism is heterozygous. In a heterozygous pairing, a dominant allele will take precedence over a recessive allele's features. However, certain alleles may be codominant, which means that neither one operates as dominant or recessive. The human ABO blood group system is one illustration.
homozygote, a living being with identical gene pairs (also known as alleles) for a certain attribute. The organism is said to be homozygous for a characteristic if both of the two gametes (sex cells) that merge during fertilisation possess the identical form of the gene for that trait. The genes for a certain characteristic differ in heterozygous organisms, often known as heterozygotes.
Learn more about Heterozygotes here:
https://brainly.com/question/14607823
#SPJ4
Determine whether an interference pattern is observed on the other side of the slits in each experiment.
a. An electro n beam is aimed at two closely spaced slits. The beam is attenuated (made dimmer) to produce only 1 electron per minute.
b. An electron beam is aimed at two closely spaced slits. A light beam is placed at each slit to determine when an electron goes through the slit.
c. A high-intensity light beam is aimed at two closely spaced slits.
d. A gun is fired at a solid wall containing two closely spaced slits.
An interference pattern is observed on the other side of the slits in the experiments A,B,C but not in the experiment D.
A. Yes, an interference pattern is observed on the other side of the slits in this experiment. Even though the electrons are fired one at a time, the interference pattern emerges over time due to the wave-like nature of the electrons.
B. Yes, an interference pattern is observed on the other side of the slits in this experiment. The act of observing which slit the electron goes through causes the wave function to collapse and destroys the interference pattern.
C. Yes, an interference pattern is observed on the other side of the slits in this experiment. The high-intensity light beam acts as a wave and creates an interference pattern as it passes through the two slits.
D. No, an interference pattern is not observed on the other side of the slits in this experiment. A gun firing solid particles like bullets is a classical object and does not exhibit wave-like behavior, so no interference pattern can be observed.
To learn more about interference pattern Click here:
brainly.com/question/1581262
#SPJ4
Which of the traits present in the plant shown here is entirely passed from one generation to the next?
A. the amount of seeds that survive being eaten by herbivores
B. the number of other plants that compete for water
C. the length of the spines that it produces
D. the amount of sunlight it receives
Answer:
The length of the spines that it produces is the trait that is entirely passed from one generation to the next.
Answer:
C. the length of the spines that it produces
Brianna is observing a plastic pipe and a styrofoam plate. She notices that the plastic pipe is attracted towards the charged styrofoam plate. What does this most likely tell Brianna about the charges of the two objects?
They have positive charges.
They have negative charges.
They have opposite charges.
The two objects have no interaction.
What will be the volume occupied by 100 grams of oxygen gas
at STP?
a 100 L
b 22 L
c 70 L
d 35 L
Answer:
22.4 liters.
Explanation:
The volume occupied by a gas at standard temperature and pressure (STP) can be calculated using the Ideal Gas Law: PV = nRT.
In this equation, P represents the pressure, V represents the volume, n represents the number of moles of gas, R is the universal gas constant (8.31 J/mol*K), and T is the temperature in Kelvin.
At STP, the pressure is 1 atm and the temperature is 0°C (273 K). If we know the number of moles of gas, we can calculate the volume it would occupy at STP.
For 100 grams of oxygen gas, we first need to convert the mass to moles using the molar mass of oxygen (32 g/mol).
So, 100 g / 32 g/mol = 3.125 moles of oxygen.
Then, plugging in the values into the Ideal Gas Law equation:
V = nRT / P
V = (3.125 moles) * (8.31 J/mol*K) * (273 K) / (1 atm)
The volume would be approximately 22 L,
ALLEN
what is most likely the mass of the dust formed on burning the piece of paper? (2 points) 2.2 grams 2.3 grams 2.5 grams 2.6 grams
The most likely the mass of the dust formed on the burning the piece of paper is 2.5 grams.
According to the law of conservation of mass : The mass can neither be created nor be destroyed but it will only be transformed from the one form to the another. In the chemical reaction the total mass on the reactant side will always be equal to the total mass of the product side.
The mass on the reactant side:
The Mass of the paper = 4.8 grams
On the product side:
Mass of the ash = 0.1 g
Mass of the smoke = 2.2 g
Total mass = 4.8 g
Mass of the Dust = 4.8 - ( 2.2 + 0.1)
= 2.5 g
To learn more about mass here
https://brainly.com/question/23901006
#SPJ4
This question is incomplete, the complete question is :
One student burned a piece of paper weighing 4.8 grams. The table below shows the mass of the materials formed by burning the paper.
Ash- 0.1 grams
Smoke- 2.2 grams
Dust- ?
Which is most likely the mass of the dust formed on the burning piece of paper?
A. 2.2 grams
B. 2.3 grams
C. 2.5 grams
D. 2.6 grams
Which one of the following can be classified as a weak electrolyte? A) HBr B) CaF2 C) OBrz D) HF E) Fz
The correct answer is
E) F2 can be classified as a weak electrolyte
The atomic number of fluorine is nine, and its chemical symbol is F. It is the palest halogen and is normally an exceedingly deadly pale yellow diatomic gas. It is the most electronegative reactive element and is extremely reactive, interacting with all other elements except for light inert gases.Fluorine atoms have nine electrons, one fewer than neon, and their electron configuration is 1s22s22p5—two in a full inner shell and seven in an empty outer shell. The physical properties of the atom are affected by the large effective nuclear charge (9 2 = 7) and insufficient nuclear shielding of the outer electrons.
To learn more about Fluorine click the link below
brainly.com/question/214125
#SPJ4
fumaric acid is an intermediate metabolite of glucose metabolism. fumaric acid contains 41.392% c, 3.473% h, and 55.135% o by mass. what is the empirical formula for fumaric acid
Fumaric acid is an intermediate metabolite of glucose metabolism. fumaric acid contains 41.392% c, 3.473% h, and 55.135% o by mass.the empirical formula of fumaric acid is C3H4O4.
Determining the Empirical Formula of Fumaric Acid.To determine the empirical formula of fumaric acid, we need to calculate the relative number of atoms of each element present in the compound. We can assume a 100 g sample of fumaric acid, which means we have:
41.392 g of carbon (C)
3.473 g of hydrogen (H)
55.135 g of oxygen (O)
Next, we need to convert these masses to moles by dividing them by the respective atomic/molecular masses:
C: 41.392 g / 12.01 g/mol = 3.446 mol
H: 3.473 g / 1.01 g/mol = 3.441 mol
O: 55.135 g / 16.00 g/mol = 3.446 mol
We can see that the number of moles of each element is approximately the same, so the empirical formula is simply the ratio of the atoms in the compound, which is:
C3H4O4
Therefore, the empirical formula of fumaric acid is C3H4O4
To know more about empirical formula, visit;https://brainly.com/question/11588623
#SPJ4
If you begin with the highest amount of available entropy, which phase change would represent a decrease in entropy?
Phase changes involving an increase in the degree of molecular disorder typically correspond to an increase in entropy.
Conversely, phase changes that decrease the degree of molecular disorder are associated with a decrease in entropy.
At a given temperature and pressure, the sequence of phase changes that represents an increase in the degree of molecular disorder is:
solid → liquid → gas
Therefore, the sequence of phase changes that represents a decrease in the degree of molecular disorder, and hence a decrease in entropy, is:
gas → liquid → solid
For example, when water vapor condenses to form liquid water, the degree of molecular disorder decreases, and hence entropy decreases.
in some cases, the phase change from a gas to a solid may bypass the liquid phase altogether, as in the case of deposition, where a gas transforms directly into a solid.
Learn more about entropy and phase changes here:
https://brainly.com/question/16718133
#SPJ4
