What is the mass of a bone that has a volume of 80.0 cm3 and a density of 1.9 g/cm3 ?
Show the work in conversion factors format please!

[tex]empirical \: formula \\ = CaSiO3 \\ please \: see \: the \: attached \: picture \\ hope \: it \: helps[/tex]

Answer:

Absolute Zero

Explanation:

at 0 Kelvin, nothing can move and entropy reaches 0

Answer:

absolute zero

Explanation:

Answer:

A. 2.71 V

Explanation:

The standard reduction potential, E° of the metals are as follows:

Mg²⁺ + 2e⁻ ⇌  Mg; E° = -2.372

Cu²⁺ + 2e⁻ ⇌  Cu; E° = +0.337

Since magnesium has the the lower E°, it will serve as the anode in the electrolytic cell while copper will serve as the cathode.

At the anode; Mg ⇌  Mg²⁺ + 2e⁻, E° = -2.372

At the cathode; Cu²⁺ + 2e⁻ ⇌  Cu, E° = +0.337

EMF of the cell = E° cathode - E° anode = 0.337 - (-2.372) = 2.71 V

Therefore, EMF of the cell is 2.71 V

Answer:-2.71 is the correct answer

Explanation:

A P E X

A solution is made by mixing 114.g of benzene C6H6 and 83.g of acetyl bromide CH3COBr, the mole fraction of benzene in this solution is 1.45mol.

The term molar mass is defined as the compound is often calculated by adding the quality atomic masses in g/mol of the constituent atoms.

Molar mass of CH3COBr,

Molar Mass = 2 × MM(C) + 3 × MM(H) + 1 × MM(O) + 1 × MM(Br)

= 122.944 g/mol

Molar mass of C6H6,

MM = 6 × MM(C) + 6 × MM(H)

= 6 × 12.01 + 6 × 1.008

= 78.108 g/mol

n(CH3COBr) = mass/molar mass

= 83 /122.944

= 0.675

n(C6H6) = mass/molar mass

= 114 / 78.108

= 1.45

n(CH3COBr),n1 = 0. 675mol

n(C6H6),n2 = 1. 45mol

Thus, the mole fraction of benzene in this solution is 1.45mol.

To learn more about the molar mass, follow the link;

https://brainly.com/question/12127540

#SPJ1

Answer:

The answer is A

Explanation:

The earth naturally maintains the heat energy balance by absorbing a sufficient amount of sunlight energy by the terrestrial land and then reverting back the excess sunlight energy back to the space. The increase in abundance of greenhouse gases in the atmosphere results in absorption of sunlight energy which contains infrared photons this is responsible for increasing the global temperature levels hence, responsible for global warming. These infrared photons are reflected to the earth surface instead of sending back to the space. This is responsible for disturbing the heat balance.

Greenhouse gases interact with infrared photons and reflect them back to earth’s surface, hence option A is correct.

The burning of fossil fuels, logging of forests, and raising of livestock all have a rising impact on the climate and temperature of the planet.

This increases the greenhouse effect and causes global warming by adding a significant amount of greenhouse gases to those that are already present in the atmosphere.

The earth naturally maintains the balance of heat energy by receiving enough solar energy through the terrestrial land and then returning any excess energy to space.

Therefore, greenhouse gases such as CO₂ and N₂O interact with infrared photons and reflect them back to earth’s surface.

Learn more about greenhouse gases, here:

https://brainly.com/question/14131369

#SPJ5

Answer:

the answer is stratosphere.

about 90% of ozone is found in the stratosphere.

Answer:

2Cl- ⇒ Cl ↓2+ 2e

Explanation: sorry if this is not what you were looking for.

Answer:

There are light absorbing color bodies called chromophores that are present in dyes. Ultraviolet rays are one of the causes of fading because they can break down chemical bonds and fade the color in objects.

In order to determine the amount of water that evaporates from we need to convert the mass into volume.

The builders and the density use the plaster of Paris called POP and are a CaSO4 x 1/2 H2O is used for the airtight containers to stop them from taking in water vapors from the air and changes into gypsum that is  CaSO4 x 2H2O. The answer is given as below. Answer:

The plaster of Paris is used for coating the walls and the celling from the aspects of molding. Its also used for casting decorative elements.

It absorbs water from the air and vapor evolves when the 2.00 kg of gypsum is heated at 110 degrees. C.

Find out more information about the Builders and dentists.

brainly.com/question/14644606.

Answer:

created an organizational hierarchy

Explanation:

Answer:

True

Explanation:

Because Nitric acid is formed by the gas-phase hydrolysis of N2O5. The energy profile curve for the reaction N2O5 H2O → 2HNO3 is shown here. The reaction is endothermic and the activation energy of the reverse reaction is larger than for the forward reaction.

Energy change is the conversion of the energy stored in reactants to products. In the reaction between hydrogen and iodine, the energy change is -7 kJ/mol. Thus, option D is correct.

Total energy change is the conversion of the energy from a substance to another when the reactant undergoes modification to produce a product.

The reaction is given as,

H₂ + I₂ → 2HI

In the reaction, the bonds between H-H and I-I are broken to release energy that produces two H-I bonds as the product.

Given,

H-H bond = 436 kJ/mol

I-I bond = 151 kJ/mol

H-I bond = 297 kJ/mol

So, 436 kJ/mol + 151 kJ/mol - 2x297 kJ/mol = -7 kJ/mol

Therefore, -7 kJ/mol is the total energy change in the reaction involving hydrogen and iodine.

Learn more about total energy change here:

https://brainly.com/question/14769257

#SPJ5

Answer:

a)0.765 g

b)7.613 g

c)0.20 L

Explanation:

Consider the reaction involved;

Na(s) + HNO3(aq) ----> NaNO3(s) + H2(g)

Note that, if a hot, saturated aqueous solution of sodium nitrate was allowed to cool, solid sodium nitrate would crystallise out of the solution and this would also be classed as a precipitate. This is the case here.

Number of moles of sodium reacted= mass of sodium reacted/ molar mass of sodium

Number of moles of sodium= 7.85g/23gmol-1

Number of moles of sodium= 0.34 moles of sodium

Number of moles of acid reacted= concentration of acid × volume of acid

Number of moles of acid= 0.0450 × 200/1000

Number of moles of acid= 9×10^-3 moles

Therefore, HNO3 is the limiting reactant.

1 mole of HNO3 yield 1 mole of NaNO3

9×10^-3 moles of HNO3 yield 9×10^-3 moles of NaNO3

Hence mass of NaNO3= number of moles × molar mass

Mass of NaNO3= 9.0×10^-3 moles × 84.9947 g/mol

Mass of NaNO3= 0.765 g of NaNO3

b)

Since

1 mole of sodium metal reacts with 1 mole of HNO3

9×10^-3 moles of sodium reacts with 9×10^-3 moles of HNO3

Therefore amount of unreacted sodium metal = 0.34 moles - 9×10^-3 moles = 0.331 moles

Mass of unreacted sodium metal = 0.331 moles × 23 gmol-1= 7.613 g

c)

If 1 mole of HNO3 yields 1 mole of hydrogen gas

9×10^-3 moles of HNO3 yields 9×10^-3 moles of hydrogen gas.

1 mole of hydrogen gas occupies 22.4 L

9×10^-3 moles of hydrogen gas will occupy 9×10^-3 moles × 22.4/1 = 0.20 L

Answer:

the answer is A

Explanation:

Forces are the intermolecular interaction between the matter. Forces present in a solid are strongest. Thus, option A is correct.

The matter is any substance that occupies a volume. Matter can be a solid, gas, or liquid. The solid phase particles are tightly closed to each other making the force strong.

The particles of liquids that are not too compact are a little free and in gases, the particles are very free, which makes the bonding and the force the weakest.

Therefore, option A. the solids have the strongest intermolecular bonding.

Learn more about intermolecular forces here:

https://brainly.com/question/14155077

#SPJ2

Answer: Thus the yield of uranium from 2.50 kg [tex]U_3O_8[/tex] is 2.12 kg

Explanation:

According to avogadro's law, 1 mole of every substance weighs equal to molecular mass and contains avogadro's number [tex](6.023\times 10^{23})[/tex] of particles.

To calculate the number of moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{molar mass}}[/tex]

moles of [tex]U_3O_8=\frac{2.50\times 1000g}{842g/mol}=2.97mol[/tex]    (1kg=1000g)

As 1 mole of [tex]U_3O_8[/tex] contains = 3 moles of U

2.97 mole of [tex]U_3O_8[/tex] contains = [tex]\frac{3}{1}\times 2.97=8.91moles[/tex] moles of U

Mass of Uranium=[tex]moles\times {\text {Molar mass}}=8.91mol\times 238g/mol=2120g=2.12kg[/tex]  

 ( 1kg=1000g)

Thus the yield of uranium from 2.50 kg [tex]U_3O_8[/tex] is 2.12 kg

Answer:

Dmitri Mendeleev

Explanation:

He was a Russian Scientist who decided to reorganize the periodic table after other notable scientists such as Antoine-Laurent Lavoisier had also tried to organize it based on the states of matter of the elements.

Mendeleev reorganized the period in the order of increasing atomic mass although there were some other modifications by modern scientists.

Answer:

HNO3 ->NO3²- + H+

Concentration of H+ ions= 0.0032M

pH = - log[ H+]

= - log (0.0032)

= 2.49

pH + pOH = 14

pOH = 14 - pH

= 14 - 2.49

= 11.51

pH = 2.49 and pOH = 11.51

Hope this helps.

Answer:

metals donate electrons to nonsmetals

Answer: [tex]I_{2} (l)[/tex]

Explanation: Because C 6 H 6 is nonpolar substance and I 2 is also nonpolar compound

According to the concept of solubility,iodine  will form a solution when mixed with liquid benzene  as both are non-polar substances.

Solubility is defined as the ability of a substance which is basically solute to form a solution with another substance. There is an extent to which a substance is soluble in a particular solvent. This is generally measured as the concentration of a solute present in a saturated solution.

The solubility mainly depends on the composition of solute and solvent ,its pH and presence of other dissolved substance. It is also dependent on temperature and pressure which is maintained.Concept of solubility is not valid for chemical reactions which are irreversible. The dependency of solubility on various factors is due to interactions between the particles, molecule or ions.

Learn more about solubility,here:

https://brainly.com/question/29857840

#SPJ5

Answer: The boiling point of a 3.70 m solution of phenol in benzene is [tex]89.5^0C[/tex]

Explanation:

Elevation in boiling point:

[tex]\Delta T_b=i\times k_b\times m[/tex]

where,

[tex]\Delta T_b[/tex] = change in boiling point

i= vant hoff factor = 1 (for benzene which is a non electrolyte )

[tex]k_b[/tex] = boiling point constant = [tex]2.53^0C/kgmol[/tex]

m = molality = 3.70

[tex]T_{solution}-T_{solvent}=i\times k_b\times m[/tex]

[tex]T_{solution}-80.1^0C=1\times 2.53\times 3.70[/tex]

[tex]T_{solution}=89.5^0C[/tex]

Thus  the boiling point of a 3.70 m solution of phenol in benzene is [tex]89.5^0C[/tex]

Answer:

First Question:

C. ΔTb = Kbm

Second Question:

C. 9.36° C

Third Question:

89.5

Explanation:

Got it right.

When an F atom becomes an F-ion, the F atom gains an electron.

Learn more at: https://brainly.com/question/13495616?referrer=searchResults

The Fluoride ion given has a -ve charge onto it. Thus in order to become stable Fluorine gains an electron. Thus option b is correct.

The elements in the periodic table try to attain the stable noble gas configuration in the order to become stable. The noble gas configuration has the elements to be less reactive.

When the atom loses an electron in order to become more stable,  a +ve charge has been implemented onto the ion.

When the atom gains an electron to become stable, a -ve charge has been added to the ion.

The Fluoride ion given has a -ve charge onto it. Thus in order to become stable Fluorine gains an electron. Thus option b is correct.

For more information about atom, refer to the link:

https://brainly.com/question/21850455

Answer:

Because it's not soluble in water, need to be heated acidic solution

Explanation:

Calcium Fluoride Formula: CaF2  Comprises of Ca2+ and F−

H2O = Water H+ O2- OH-

Insoluble in water

In order to dissolve a salt, you have to break apart the ions and hydrate them via a solvent.

Need to read

HSAB concept( Pearson acid-base concept) is an initialism for "hard and soft (Lewis) acids and bases"

So F- is a Halogen which is a Hard Base

And OH- is a Hard base as well

And H- is a soft base

So soft acids react best with soft bases and hard acids react best with hard bases.

Bases don't react with other bases.

Answer:

molecular formula of liquid = C₈H₁₈

Explanation:

First we determine the empirical formula of the liquid:

Number of moles of each element present in the liquid = % mass / molar mass

For Carbon, (molar mass = 12.01 g/mol) : 84.2/12.01 =7.011 moles

For Hydrogen (molar mass = 1.01 g/mol) : 15.8/1.01 = 15.643

Simplest mole ratio of the elements, C : H  is given by:

C = 7.011/7.011 = 1.0

H = 15.643/7.011 = 2.23

Multiplying through with 5, C:H = 5:11

Therefore, empirical formula is C₅H₁₁

The molecular mass of the liquid is next determined:

Using PV = nRT to find the number of moles of the liquid present

P = 5.0 atm; V = 568.0 mL = 0.568 L; R = 0.082 L*atmmol⁻¹ K⁻¹; T = 273 + 120 = 393 K

n = PV/RT = (5*0.568)/0.082*393

n = 0.088 moles

Molar mass of liquid = mass/no of moles = 10.0 g/ 0.088 moles = 113.63 gmol⁻¹

Molecular formula = n(empirical formula)

Molar mass of empirical formula, C₅H₁₁ = 71 gmol⁻¹

n = molecular mass/empirical mass = 113.63/71 = 1.6

Therefore, molecular formula =  1.6*(C₅H₁₁) = C₈H₁₈

Answer:

2O L

Explanation:

The balanced chemical equation is 2NO+O  

2

​  

→2NO  

2

​  

Thus, 2 moles of NO will produce 2 moles of NO  

2

​  

.

Also, the volume is directly proportional to the number of moles.

Therefore, 20 L of NO will produce 20×  

2

2

​  

=20 L of NO  

2

​  

Answer:

El potencial celular estándar, [tex]E_{cell}[/tex] is +0.46 V

Explanation:

Las reacciones de media célula son;

Media reacción del ánodo Cu²⁺ + 2e⁻ ↔ Cu, E ° = 0.34 V

Media reacción catódica 2Ag + 2e⁻ ⁻ 2Ag, E ° = 0.80 V

Sin embargo tenemos para hierro Fe²⁺ + 2e⁻ ↔ Fe, E ° -0.44 V

y Fe³⁺ + e⁻ ↔ Fe²⁺, E ° = 0.77 V

 que es más alta que la del cobre presente, por lo tanto, el cobre se oxidará en el ánodo

Por lo tanto, en el ánodo, tendremos

Cu → Cu²⁺ + 2e⁻ (E ° = -0.34 V)

En el cátodo

2Ag + 2e⁻ → 2Ag (E ° = 0.80 V)

[tex]E_{cell} = E_c + E_a = -0.34 + 0.8 = +0.46 \, V[/tex]

El potencial celular estándar, [tex]E_{cell}[/tex] = +0.46 V

Answer:

Strontium, a group 2 element with an electron configuration of 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ 5s² , will form a +2 ion in a chemical bond.

Explanation:

An ionic bond is produced between metallic and non-metallic atoms, where electrons are completely transferred from one atom to another. During this process, one atom loses electrons and another one gains them, forming ions. Usually, the metal gives up its electrons forming a cation to the nonmetal element, which forms an anion.

So an ion is an atom or group of atoms that have an electric charge. A cation is an ion that has a positive charge.

The alkali metals in the earth (Elements IIA) lose two electrons to form a 2+ cation. Strontium is an alkali metal that loses the two electrons belonging to 5s², forming the +2 ion.

Answer:

+2

Explanation:

Answer:

[tex]\large \boxed{1.615 \times 10^{25}\text{ molecules water}}[/tex]

Explanation:

You must calculate the mass of the water, convert it to moles, and then calculate the number of molecules.

1. Mass of water

[tex]\text{Mass } = \text{499.8 mL} \times \dfrac{\text{0.967 g}}{\text{1 mL}} = \text{483.3 g}[/tex]

2. Moles of water

[tex]\text{Moles of water} = \text{483.3 g water} \times \dfrac{\text{1 mol water}}{\text{18.02 g water}} = \text{26.82 mol water}[/tex]

3. Molecules of water

[tex]\text{No. of molecules} = \text{26.82 mol water} \times \dfrac{6.022 \times 10^{23}\text{ molecules water}}{\text{1 mol water}}\\\\= \mathbf{1.615 \times 10^{25}}\textbf{ molecules water}\\\text{The sample contains $\large \boxed{\mathbf{1.615 \times 10^{25}}\textbf{ molecules water}}$}[/tex]

The number of molecules of water  present in the bottle is 1.62×10²⁵ molecules.

We'll begin by calculating the mass of the water in the bottle.

Mass = Density × Volume

Mass of water = 0.967 × 499.8

Mass of water = 483.3066 g

Finally, we shall determine number of molecules of water in the bottle.

From Avogadro's hypothesis,

1 mole of water = 6.02×10²³ molecules

But,

1 mole of water = 18 g

Thus, we can say that:

18 g of water = 6.02×10²³ molecules

Therefore,

483.3066 g of water = (483.3066 × 6.02×10²³) / 18

483.3066 g of water = 1.62×10²⁵ molecules

Thus, the number of molecules of water in the bottle is 1.62×10²⁵ molecules.

Learn more about Avogadro's number:

https://brainly.com/question/8933381

Answer:

Galileo: "Father of Modern Science."

Aristotle: Geocentric theory." (The planests revolves around the earth.)

Torricelli: Invented the barometer. (An instrument which measures pressure.)

Copernicus: Heliocentric theory. (Aka, the planets revolves around the sun.)

Vesalius: Examined the inner workings of the human body

Newton: Developed law of universal gravitation.

Nightingale: Founded nursing profession.

Celsius: Developed metric temperature scale

I hope this helps! Thanks:)