Answer:
pH=2.3
Explanation:
One H2SO4 molecule produce two H+ ions.
So conc. of H+ = 2(0.0025)
=0.005
Now, pH=-log (conc. of H+)
=-log(0.005)
=2.3
Glucose, C₂H12O6, is a product of photosynthesis.
It has the following structure.
HICIO
HICIOH
HOIC-H
HICIOH
HICIOH
HICIOH
I
H
How many chiral centres does the molecule have?
A 1
B2
C 4
D 6
Answer:
C
Explanation:
four chiral centers
In a container with 512.1 L water, the pH should be changed to 5 using 95% sulfuric acid. The question is how much sulfuric acid is needed.
Answer:
15
Explanation:
I got it right I just had the answer
What would most likely happen when a metal is heated?
It will melt.
It will solidify.
Its temperature will decrease.
Its particles will move slower.
Answer: it is A i took the test i got it right
Explanation: i took the test
The heat of vaporization of water is 540 cal/g. How much heat is needed to change 4.28g of water to steam?
Answer:
2311.2 cal
Explanation:
540 cal / g * 4.28 g = 2311.2 cal
2311.2 cal heat is needed to change 4.28g of water to steam.
What is heat?Heat is the transfer of kinetic energy from one medium or object to another, or from an energy source to a medium or object.
The heat of vaporization is defined as the amount of heat needed to turn 1g of a liquid into a vapour, without a rise in the temperature of the liquid.
The heat of vaporization is equal to the thermal energy required for vaporization divided by the mass of the substance that is vaporizing. Its formula is Hv = q/m.
Putting the values in the formula:
540 cal / g x 4.28 g = 2311.2 cal
Hence, 2311.2 cal heat is needed to change 4.28g of water to steam.
Learn more about the heat here:
https://brainly.com/question/13411214
#SPJ2
Aqueous Copper (II) nitrate reacts with aqueous potassium iodide to form Copper (II) iodide solid and potassium nitrate
Answer:
Cu(NO₃)₂ (aq) + 2 KI (aq) ---> CuI₂ (s) + 2 KNO₃
Explanation:
When writing the reaction with the symbols, you need to take into account the charges of the ions. If he charges on the ions do not balance out in a molecule, they need to be made up for in the form of subscripts. For example, copper (+2) and iodine (-1) have charges which do not balance. Thus, to make the molecule neutral, you need to have two iodine atoms (CuI₂).
The unbalanced equation:
Cu(NO₃)₂ (aq) + KI (aq) ---> CuI₂ (s) + KNO₃
Reactants: 1 copper, 2 nitrate, 1 potassium, 1 iodine
Products: 1 copper, 1 nitrate, 1 potassium, 2 iodine
The balanced equation:
1 Cu(NO₃)₂ (aq) + 2 KI (aq) ---> 1 CuI₂ (s) + 2 KNO₃
Reactants: 1 copper, 2 nitrate, 2 potassium, 2 iodine
Products: 1 copper, 2 nitrate, 2 potassium, 2 iodine
Which element has properties most like Mg?
Answer:
The elements which are in the group
Activity 1.3 Put an unlit incense stick in a corner of your class. How close do you have to go near it so as to get its smell? Now light the incense stick. What happens? Do you get the smell sitting at a distance? Record your observations.
reaction of cysteine and NaOH
Answer:
cysteine is HOOC-CH--CH₂-SH
reaction with Naoh
HOOC-CH--CH₂-SH + Naoh ---->oh-oNH2-oh + H2o
When 50.5 g iron(III) oxide reacts with carbon monoxide, 32.2 g iron is produced. What is the percent yield of the reaction?
Fe2O3(s)+3CO(g)→2Fe(s)+3CO2(g)
93.80 % is the per cent yield of the reaction [tex]Fe_2O_3(s)+3CO(g)[/tex] → [tex]2Fe(s)+3CO_2(g)[/tex].
What is a mole?A mole is a very important unit of measurement that chemists use. A mole of something means you have 602,214,076,000,000,000,000,000 of that thing, like how having a dozen eggs means you have twelve eggs.
[tex]Fe_2O_3(s)+3CO(g)[/tex] → [tex]2Fe(s)+3CO_2(g)[/tex]
[tex]50.5 g Fe_2O_3[/tex] x ([tex]1 mol of Fe_2O_3[/tex] ÷ [tex]159.69 g Fe_2O_3[/tex]) x ([tex]2 mol\; of Fe[/tex] ÷ [tex]1 mol Fe 34.97 g Fe[/tex])
[tex]% of yield = \frac{Practical X 100}{Theoretical}[/tex][tex]Percentage \;of \;yield = \frac{Practical X 100}{Theoretical}[/tex]
[tex]Percentage\; of yield = \frac{32.8 X 100}{34.97}[/tex]
= 93.80 %
Hence, 93.80 % is the per cent yield of the reaction.
Learn more about the mole here:
https://brainly.com/question/26416088
#SPJ1
nts
S + 6 HNO3 → H₂SO4 + 6 NO₂ + 2 H₂O
In the above equation, how many grams of water can be made when 19.7 moles of HNO3 are
consumed?
Round your answer to the nearest tenth. If you answer is a whole number like 4, report
the answer as 4.0
Use the following molar masses. If you do not use these masses, the computer will mark
your answer incorrect.:
Molar
Mass
Element
Hydrogen 1
Nitrogen 14
Sulfur 32
Oxygen 16
Answer:
118.2 g H₂O
Explanation:
To find the mass of water, you need to (1) convert moles HNO₃ to moles H₂O (via mole-to-mole ratio from reaction coefficients) and then (2) convert moles H₂O to grams H₂O (via molar mass).
The molar mass of water can be found by combining the element's molar masses times their quantities. The ratios/conversions should be arranged in a way that allows for the cancellation of units (desired unit should be in the numerator).
Molar Mass (H₂O): 2(1 g/mol) + 16 g/mol
Molar Mass (H₂O): 18 g/mol
S + 6 HNO₃ ---> H₂SO₄ + 6 NO₂ + 2 H₂O
^ ^
19.7 moles HNO₃ 2 moles H₂O 18 g
-------------------------- x ----------------------- x --------------------- = 118.2 g H₂O
6 moles HNO₃ 1 mole H₂O
Given the following list of densities, which materials would float in a molten vat of lead provided that they do not themselves melt? Densities: g/mL: lead= 11.4; glass= 2.6, gold= 19.3, charcoal= 0.57, platinum = 21.4. Enter your answer as a word only. If two or more items would float include the word and between those two items.
The materials that would float in a molten vat of lead are glass and charcoal.
Which material floats on the solution?Glass and charcoal are the materials that would float in a molten vat of lead because they are less denser than the lead solution while on the other hand, platinum and gold get drowned into the solution because of its high density as compared to lead.
So we can conclude that the materials that would float in a molten vat of lead are glass and charcoal.
Learn more about density here: https://brainly.com/question/14997726
#SPJ1
Consider this reaction, which occurs in the atmosphere and contributes to photochemical smog:
2Fe(s) + 3Cl2(g) →2FeCl3(s)
If there is 15.52 g Fe and excess Cl2 present, the reaction yields 34.5 g FeCl3. Calculate the
percent yield for the reaction.
%
2Fe(s) + 3Cl₂(g) →2FeCl₃(s)
mol Fe = 15.52 : 56 g/mol = 0.277
mol FeCl₃ = mol Fe = 0.277 (same coefficient)
mass FeCl₃ = 0.277 x 162.2 g/mol = 44.93 g
% yield = 34.5 : 44.93 = 76.79 %
When the human body is exposed to extreme cold, hypothermia can result and the body’s temperature can drop to 28.68°C. Convert this temperature to K.
Answer:
299.83°K
Explanation:
So, kelvin is a means of measuring temperature, as the question implies. To convert Celsius, one form of measuring temperature, to Kelvin, another form of measuring temperature, we must know the conversion median. Our median is that 0°C = 273.15°K. So, now, as we know that 0°C = 273.15°K, 26.68°C = 273.15°K + 26.68°. Because 273.15K might as well be zero degrees celsius (according to our median 0°C = 273.15°K), we simply add 26.68° to 273.15K and get 299.83°K
A student combined equal amounts of two solutions. One solution had a pH of 2 and the other had a pH of 12. Which would
most likely be the resulting pH?
1
3
6
11
Answer:
the answer is 6. 2 goes into 12 6 times resulting in the answer 6
Please help
Logan has been studying rocks at school. How could he learn more about the different types of rocks that come from volcanoes?
A.
collect rocks at the shore
B.
read comics about imaginary rocks
C.
explain to his sister how volcanoes form
D.
watch videos about volcanic rocks
Answer:
I think D is the answer. The others can't be answer. Specially B and D can't be the answer.
Predict the nature of the indicated
covalent bond.
non-polar
Explanation :
Hydrogen and carbon have similar electronegativity values, so the C—H bond is not normally considered a polar covalent bond.
What mass of carbon monoxide is required to react completely with 318g of iron(III) oxide?
The balanced equation for this reaction is [tex]3\text{CO}+\text{Fe}_{2}\text{O}_{3} \longrightarrow 2\text{Fe}+3\text{CO}_{2}[/tex].
This means that for every mole of iron(III) oxide consumed, 3 moles of carbon monoxide are consumed.
Iron has an atomic mass of 55.845 g/mol.Oxygen has an atomic mass of 15.999 g/mol.This means that iron(III) oxide has a formula mass of 2(55.845)+3(15.999)=g/mol, and thus 318 g is equal to [tex]\frac{318}{159.687}=1.9913956677751 \text{ mol}[/tex].
So, this means we need [tex]3(1.9913956677751)=5.9741870033253 \text{ mol}[/tex] of CO.
Carbon has an atomic mass of 12.011 g/mol.Oxygen has an atomic mass of 15.999 g/mol.This means CO has a formula mass of 12.011+15.999=28.01 g/mol, and thus 5.9741870033253 moles have a mass of (28.01)(5.9741870033253), which is equal to about 167 g (to 3 sf)
What is open system?
What is close system?
What is the valency of an atom?
State Heisenberg uncertainty principle
Define endothermic reaction
Answer:
1) open system is the system through which both matter and energy and enter as well as leave
ex - open beaker
2) close system is the system through which only energy can leave but matter cannot
ex - pressure cooker.. ( energy leave as air)
3) Valency of an atom is the no. of outer most electron which can participate in a reaction.
4). Heisenberg uncertainty principal states that it is impossible to measure or calculate exactly, both the position and the momentum of an object
5) The reaction in which heat is required to make products are called endothermic reaction. it cools down the surrounding .
The concentration of lead nitrate Pb(NO3)2
in a 0.726 M solution is __________ molal. The
density of the solution is 1.202 g/mL.
Answer: The concentration of lead nitrate Pb(NO3)2 in a 0.726 M solution is 0.755 molal.
Explanation:
Given:
The molar mass of Pb(NO3)2 is 331.2 g/mol
Assuming 1 litre of solution. This would equal 1202 g of solution
In the one litre of solution, you have 0.726 mol Pb(NO3)2
0.726 mol (331.2 g/mol) = 240.5 g Pb(NO3)2
Mass of water in 1 L of solution = 1202 g - 240.5 g = 961.5 g = 0.9615 kg
Molality = mols of solute / kg of solvent
= 0.726 mol / 0.9615 kg
= 0.755 m Pb(NO3)2
You are working with a concentrated solution of ammonium hydroxide. Which
piece of safety equipment is most important to have on hand?
Rubber gloves and other chemical resistant protective clothing are necessary when handling concentrated ammonium hydroxide.
Why it is necessary to handle concentrated solution of ammonium hydroxide with care ?Ammonia is an irritant and corrosive to the skin, eyes, respiratory tract and mucous membranes. May cause severe chemical burns to the eyes, lungs and skin.The extent of injury produced by exposure to ammonia depends on the duration of the exposure, the concentration of the liquid or vapor and the depth of inhalation.
Hence, Rubber gloves and other chemical resistant protective clothing are necessary when handling concentrated ammonium hydroxide.
Learn more about Ammonium Hydroxide here ;
https://brainly.com/question/3383763
#SPJ1
What’s the gravitational potential energy of a book 2.0 meters above the floor with a mass of 1.5 kilograms
Answer:
29.3 joules
Explanation:
P.E. = mgh
= 1.5 kg * 9.81 m/s^2 * 2 m = 29.3 Joules
how many neutrones does the isotope n-14 have
Answer: 7
Explanation:
Proton/atomic number + Neutron = atomic mass
atomic mass - protons/atomic number = neutrons
14 - 7 = 7
Which of the following statements about carbon dioxide is not true?
Increased carbon dioxide in the atmosphere increases the Greenhouse Effect.
Carbon dioxide is a greenhouse gas.
Atmospheric carbon dioxide levels have slowly declined over the last 50 years.
Burning fossil fuels can increase carbon dioxide levels in the atmosphere.
The standard oxidation-reduction potential of a system Fe3+ —> Fe2+ is 0.77 V. What is the ratio of the oxidized form concentration to the reduced form concentration if E = 0.711 V?
Based on the oxidation-reduction potential of the system, ratio of the concentration of the oxidized form to the concentration of the reduced form is 1 : 10.
What is standard oxidation-reduction potential of a system?The oxidation-reduction potential of a system is a measure of the tendency for a given chemical species to be reduced.
The reduction equation is as follows:
[tex]Fe^{3+} \rightarrow Fe^{2+} = 0.77\:V[/tex]
Using the equation:
[tex]E = E^{o} - \frac{0.0592}{n}log\frac{[Fe^{2+}]}{[Fe^{3+}]}[/tex]
n = 1; E⁰ = 0.77; E = 0.711
Substituting the values and using 1/x as the ratio:
[tex]0.711 = 0.77 - \frac{0.0592}{1} * log\frac{1}{x}[/tex]
x = 1/10
Therefore, the ratio of the concentration of the oxidized form to the concentration of the reduced form is 1 : 10.
Learn more about standard oxidation-reduction potential at: https://brainly.com/question/8739272
#SPJ1
what's the name of the compound?
which of the following best describes what happens during nuclear fusion
Answer:
Nuclear fusion is a kind of nuclear reaction in which two lighter nuclei combine under suitable conditions to form heavier nuclei under suitable conditions. A lot of energy is released in this process.
HELP! ASAP!
1. Using the model below, identify the products, reactants, and limiting reactant in the chemical reaction. Please provide an explanation of your reasoning. In addition, write the balanced chemical equation for the reaction that is taking place in the chamber.
Given the model from the question,
The products are: N₂, H₂O and H₂The reactants are: H₂ and NOThe limiting reactant is H₂The balanced equation is: 3H₂ + 2NO —> N₂ + 2H₂O + H₂Balanced equationFrom the model given, we obtained the ffolowing
Red => Oxygen Blue => Nitrogen White => HydrogenThus, we can write the balanced equation as follow:
3H₂ + 2NO —> N₂ + 2H₂O + H₂
From the balanced equation above,
Reactants: H₂ and NOProduct: N₂, H₂O and H₂How to determine the limiting reactant3H₂ + 2NO —> N₂ + 2H₂O + H₂
From the balanced equation above,
3 moles of H₂ reacted with 2 moles of NO.
Therefore,
5 moles of H₂ will react with = (5 × 2) / 3 = 3.33 moles of NO
From the calculation made above, we can see that only 3.33 moles of NO out of 4 moles given are required to react completely with 5 moles of H₂.
Thus, H₂ is the limiting reactant
Learn more about stoichiometry:
https://brainly.com/question/14735801
#SPJ1
Convert the scientific notation to a decimal number.
To convert Scientific Notation to a decimal number, Prescribed steps are to be taken given below.
What is Scientific Notation ?Scientific notation is a way of writing very large or very small numbers.
A number is written in scientific notation when a number between 1 and 10 is multiplied by a power of 10.
Steps to Calculate Scientific Notation ;Determine the exponent, n , on the factor 10 .Move the decimal n places, adding zeros if needed. If the exponent is positive, move the decimal point n places to the right. If the exponent is negative, move the decimal point |n places to the left.Check.Learn more about Scientific Notation here ;
https://brainly.com/question/2005529
#SPJ1
Which TWO of the following processes will increase the concentration of al solution?
(a) Increase the amount of solute.
(b) Decrease the amount of solute.
(c) Increase the amount of solvent.
(d) Decrease the amount of solvent.
Answer:
B decrease the amount of solute
Question 4
2 pts
2 NH3 + 3 CuO g 3 Cu + N₂ + 3 H₂O
In the above equation how many moles of water can be made when 14 moles of NH3 are
consumed?
Answer:
9.33
Explanation:
balanced chemical equation:
2NH₃ + 3CuO → 3Cu + N₂ + 3H₂O
14 moles of NH3
2NH₃ → 3H₂O
14 * 2/3 = 9.33
https://brainly.com/question/20985430
quora
