What is the term for the amount of solute in moles per kilogram of solvent?

The concentration of a chemical influences absorbance. A substance's absorbance relates to its concentration. This is true because the quantity of light absorbed depends on the number of molecules with which light interacts.

The relationship between the absorbance and the concentration (c) of the sample solution employed in the experiment is straightforward. The width of the cuvette (l), which is equal to the length of the light path (l), has a direct relationship with absorbance. They are negatively correlated; as concentration rises, absorbance falls. Using Lambert's Beer Law, it is demonstrated that given a clear but colored solution, the relationship between absorbance and concentration is directly proportional. Increased particle density increases light absorption.

Learn more about molecules here:

https://brainly.com/question/19922822

#SPJ4

The pioneers found that placing a large tub of water in a storage cellar would prevent their-food from freezing on really cold nights, it can absorb or lose quite a bit of energy.

Because water has a high specific heat, it can absorb or lose quite a bit of energy and not witness important change in temperature. The water would act as a means of precluding the temperature in the basement from varying important so that stored goods would neither indurate nor come too warm.

The high mass and specific heat of the barrel of water and its high heat of emulsion mean that a large quantum of energy would have to blunder out of the basement before the water and the yield set solid. Evaporation of the water keeps the relative moisture high to cover foodstuffs from drying out.

Learn more about Storage cellar problems:

https://brainly.com/question/13723748

#SPJ4

The most oxygen atoms shared by pairs of neighbouring tetrahedra are found in double chain silicates, which is the most common kind of silicate.

This particular silicate consists of silicon atoms bound to other silicon atoms in a chain with oxygen atoms, with oxygen atoms forming the corners of the tetrahedra. As compared to other forms of silicates, these chains share oxygen atoms with neighbouring chains, leading to a higher percentage of oxygen atoms shared by pairs of adjacent tetrahedra. Due to the lack of connectedness between their tetrahedral units, other silicate types, such as sheet silicates and framework silicates, have a lower percentage of oxygen atoms shared by pairs of neighbouring tetrahedra. Because of this, double chain silicates have a tendency to be more dense and structurally complicated than other silicate kinds.

learn more about oxygen atoms here:

https://brainly.com/question/7695753

#SPJ4

Answer:

Minerals and rocks

Cassiterite is a tin oxide mineral (SnO2) and the principal source for tin metal (79.6% Sn). The color is shining black, brownish-black (Fig. 1.34), reddish brown, gray, red, white, and rarely colorless. The crystal system is tetragonal with very common twinning.

Answer:

The concentration of N2(g) in parts per billion (ppb) in a solution can be calculated as follows:

(mass of N2(g) in solution / total mass of solution) * 10^9 ppb

Plugging in the given values, we have:

(1.5 * 10^-6 g / (7.5 g + 1.5 * 10^-6 g)) * 10^9 ppb = (1.5 * 10^-6 g / 7.5 g) * 10^9 ppb = 200 ppb

So, the concentration of N2(g) in the solution is 200 ppb.

The answer is true, confectioners sugar can be substituted for granulated sugar but it may not always be an exact 1:1 substitution.

Confectioners sugar (also known as powdered sugar or icing sugar) can be substituted for granulated sugar in some recipes, but it may not always be an exact 1:1 ratio substitution.

Confectioners sugar is a very fine powder that contains cornstarch, which is added to prevent caking. Due to its fine texture, it can dissolve quickly in recipes and can add a slightly different texture to baked goods. It can also affect the sweetness level of the recipe as it usually contains cornstarch or other additives, which can also influence the texture of the final product.

In general, substituting confectioners sugar for granulated sugar works best in recipes that don't require the sugar to dissolve completely, such as frosting or glazes. For recipes that require the sugar to dissolve, such as in baking or making meringues, it's best to use granulated sugar.

So, the answer is "True", but the substitution may not be appropriate for all recipes.

To learn more about granulated sugar Click here:

brainly.com/question/30634284

#SPJ4

Answer:

the answer is here

Explanation:

Yes, interstitial fluid is included in the extracellular fluid.

Extracellular fluid refers to all the fluid that is outside of cells and includes both interstitial fluid and plasma. Interstitial fluid is the fluid that surrounds individual cells and fills the spaces between tissues. Plasma, on the other hand, is the fluid component of the blood that carries nutrients, hormones, waste products, and other substances throughout the body.

Together, interstitial fluid and plasma make up the extracellular fluid compartment, which is important for maintaining fluid balance and supporting the exchange of substances between cells and their environment. The extracellular fluid compartment is constantly in flux, with fluid moving in and out of it as needed to maintain homeostasis.

To learn more about Extracellular fluid :

https://brainly.com/question/29307524

#SPJ4

For this reaction, the appropriate equilibrium relation is x = (Kc)1/4.

Write the reaction's equilibrium constant expression. To find x, substitute the final concentrations and the known K value. Determine each substance's final concentration in the reaction mixture. By adding these values to the expression for the equilibrium constant to get K, you may verify your answers.

Nickel tetracarbonyl, Ni(CO)4, decomposes in an equilibrium reaction that is:

Ni(CO)4(g) ⇌ Ni(s) + 4CO(g)

which is given by the expression:

Kc = [Ni(s)] [CO]4 / [Ni(CO)4(g)]

The initial concentration of nickel tetracarbonyl gas is also given as 1.0 M.

Let x be the equilibrium concentration of CO gas, then the equilibrium expression can be written as:

Kc = (1) (x)4 / (1.0)

Simplifying the expression gives:

Kc = x4

Taking the fourth root of both sides gives the equilibrium relation:

x = (Kc)1/4

To know more about equilibrium reaction visit:-

https://brainly.com/question/15118952

#SPJ1

An element in activity series can replace the more reactive elements  Because of this, the single replacement reaction occurs.

The activity series is defined as a list of elements in decreasing order of their reactivity. In a single replacement reaction, a given element is capable of replacing an element that is below it in the activity series. It can be used to predict if a reaction will occur. This reactions only occur when the element that is doing the replacing is more reactive than the element that is being replaced. It is useful to have a list of elements in order of their relative reactivities. The activity series defined as a list of elements in decreasing order of their reactivity. Since metals replace other metals while nonmetals replace other nonmetals and elements replace elements they each have a separate activity series.

To learn more about Single replacement reaction please visit:

https://brainly.com/question/19068047

#SPJ4

the molar mass of Mercury is 200.59 u

Answer:

When 1-bromopropane is subjected to magnesium, 1-pentanol results, which is then followed by ethylene oxide and aqueous acid.

A Grignard reagent is created when 1-bromopropane reacts with magnesium to begin the process. Then, the ethylene oxide and the Grignard reagent combine to create an intermediary molecule. Aqueous acid is then used to transform this intermediate chemical into 1-pentanol.

To turn alkenes into alcohols, a technique known as the "Wacker oxidation" or "Wacker process" is utilized. It is significant to remember that Wacker oxidation is a multi-step procedure that calls for particular reagents and circumstances in order to be properly carried out. To produce the desired product, the reaction must be carried out in an inert environment at high temperatures.

To learn more about 1-bromopropane click here https://brainly.com/question/21286023

#SPJ4

compete question: when 1-bromopropane is exposed to magnesium, followed by ethylene oxide, and then aqueous acid, what is the resulting product? a.) 2-pentanol b.) 2-methyl-2-pentanol c.) 2-methyl-2-hexanol d.) 1-pentanol

The time when the tree die from which the charcoal came is 1.02×10⁻⁴ years. if half-time of carbon-14 is 5600years.

An amount is dependent upon exponential decay on the off chance that it diminishes at a rate relative to its ongoing worth. Emblematically, this interaction can be communicated by the accompanying differential equation, where N is the amount and λ (lambda) is a positive rate called the dramatic rot steady, crumbling consistent, rate steady, or change consistent: dN/dt=-λN. The answer for this situation (see deduction beneath) is: N(t)=N₀e⁻[tex]\frac{k}{t}[/tex], where N(t) is the amount at time t, N₀ = N(0) is the underlying amount, that is to say, the amount at time t = 0.

We know that exponential decay is given

A[tex]_t[/tex] = A₀ e⁻[tex]\frac{k}{t}[/tex] where K is decay constant.

We firstly find decay constant by using the half life-time

We know that t=ln2/k where t is half life time .Since,t=5600years given

=>5600=ln2/k

=>k=(ln2/5600)years

Now,it is given that at any particular instant amount of charcoal remain is 30 % of initial amount.

So, (30/100)A₀=A₀e⁻[tex]\frac{k}{t}[/tex]

Here,k=(ln2/5600)years

=>30/100=e⁻ [tex]\frac{ln2/5600}{t}[/tex]

Taking ln on both sides of equation,we get

=>ln(30/100)=ln(e⁻ [tex]\frac{ln2/5600}{t}[/tex])

=>ln30-ln 100= - ln2/5600t

=>3.40 - 4.60 = -0.693/5600t

=> - 1.205 = -0.693/5600t

=>t=0.693/ (1.205×5600)

=>t=0.693 / 6748years

=>t=0.000102years or 1.02×10⁻⁴ years.

To know more about exponential decay,visit here:

https://brainly.com/question/14355665

#SPJ4

E) None of the above is the correct answer. The voltage produced by the colorimeter is logarithmically related to the absorbance of the sample and proportional to the light intensity.

The study of measuring the concentration of a coloured substance in a solution is known as colorimetry. A colorimeter is a tool that is sensitive to light. It is used to gauge the amount of light that passes through a liquid sample both transmittance and absorption. During colour measurement, the fluctuation in electromagnetic radiation's intensity in the visible wavelength area of the spectrum as a result of transmission or reflection by an object or solution is counted. Such a test can help determine the concentration of chemicals since the amount and colour of light that is absorbed or transmitted relies on the properties of the solution, including the number of particles in it.

Here is more information about colorimeter: brainly.com/question/29692263

#SPJ4

You are experimenting with blood samples and you place a drop of rbcs into a solution of 300 millimoles of CaCl2, there is no efect on RBCs.

The reason why the cell would shrink further in CaCl2 result is because it has a advanced van't Hoff factor i.e. total number of separated ionic species per solute patch( it is 2 for NaCl whereas it's 3 for CaCl2).

Nonionic solutes don't disconnect and will thus have a van't Hoff factor of 1)

Bibulous pressure( and other colligative parcels) are commensurable to van't Hoff factor. thus bibulous pressure in CaCl2 result will be3/2 times of that in an equimolar NaCl result.

Note that the ionic chemical eventuality isn't what drives osmosis; it's the discriminational attention of water( or any other detergent) that drives it.

Learn more about RBCs:

brainly.com/question/14639342

#SPJ4

Answer:

H2O

Explanation:

Answer:

H2O

Explanation:

The chemical formula for water is H2O, meaning it is made up of 2 hydrogen atoms and 1 oxygen atom.

Pouring salt on an icy sidewalk to make it free of ice is an example of a colligative property. Colligative properties are properties of solutions that depend on the concentration of solute particles, but not on their identity.

Four common colligative properties are:

Pouring salt on an icy sidewalk to make it free of ice is an example of freezing point depression. The salt dissolves in the water on the surface of the ice and forms a solution. The presence of salt in the water lowers the freezing point of the water, causing it to melt even at temperatures below the normal freezing point of pure water. This effect is due to the increased number of solute particles in the solution, which interferes with the formation of the crystal lattice of ice.

To learn more about colligative property refer to this link

https://brainly.com/question/12538175

#SPJ4

[tex]CCl_4[/tex] is the least soluble in water because it is a non-polar molecule that lacks a significant dipole moment and therefore does not interact well with  polar water molecules.

The term "dissolve" describes a substance's capacity to combine uniformly with another substance, usually a liquid like water. In order for a substance to dissolve in water, its molecules must engage in molecular interactions with the water molecules that enable the two substances to combine. In most cases, this entails the creation of hydrogen bonds between the molecules of the solute and the water, enabling the solute to be encircled by water molecules and dispersed uniformly throughout the solution. The polarity, molecular makeup, and intermolecular interactions of a substance, among other things, affect its capacity to dissolve in water.

Learn more about dissolve here:

brainly.com/question/29378913

#SPJ4

The actual question is:

Which of the following substances is least likely to dissolve in water?

[tex]CHCl_3[/tex], [tex]CCl_4[/tex], [tex]CH_3(CH_2)_8CH_2OH[/tex], [tex]HOCH_2CH_2OH[/tex], [tex]CH_3(CH_2)_9COH[/tex]

c. hydrogen. A gas's average kinetic energy is related to its temperature. To determine which gas has the highest average kinetic energy per mole at 298 K, we must examine each gas's.

molar mass as well as its associated speed distribution. The following equation gives the root-mean-square (RMS) speed of a gas RMS speed is sqrt((3RT) / M). where R denotes the gas constant, T is the temperature in Kelvin, and M denotes the gas's molar mass. We can use this equation to compute the RMS speed of each gas at 298 K and compare it to see which gas has the highest average kinetic energy per mole. a. The molar mass of carbon dioxide is 44.01 g/mol. Its average speed  at 298 K is: RMS speed = sqrt((3 * 8.31 J/(mol*K) * 298 K) / 44.01 g/mol) = 408 m/s b. All gases have the same kinetic energy, regardless of their molar mass, so this answer is incorrect. c. Hydrogen has a molar mass of 2.02 g/mol. Its RMS speed at 298 K is: RMS speed = sqrt((3 * 8.31 J/(mol*K) * 298 K) / 2.02 g/mol) = 1,926 m/s/.

learn more about  Hydrogen  here:

https://brainly.com/question/28937951

#SPJ4

chef should use 478.04 ml of Italian dressing and 21.96 ml of vinegar to make 500 ml of a mixture that contains 2% vinegar

To solve this , we need to use the concept of the concentration of the solution.

Let's assume that the concentration of vinegar in the Italian dressing is C1 and that the chef wants to make V milliliters of a mixture that contains vinegar.
Let's also assume that the concentration of vinegar in the final mixture is C2.
To find out how much vinegar and Italian dressing the chef should use, we can use the following formula:
C1V1 + C2V2 = C2V
where V1 is the volume of the Italian dressing that the chef should use, and V2 is the volume of vinegar that the chef should use.
We know that the concentration of vinegar in the Italian dressing is C1, so the concentration of the other ingredients in the Italian dressing is 1 - C1.
Let's assume that the chef wants to use x milliliters of Italian dressing and y milliliters of vinegar.Using the formula above, we can set up the following equation:

C1 * x + 1 * y = C2 * V
x + y = V
We have two equations and two unknowns, so we can solve for x and y.

y = (C2 - C1) * V / (1 - C1)
x = V - y
Substituting the values of C1, C2, and V, we get:

y = (0.05 - 0.02) * 500 / (1 - 0.02) = 21.96 ml
x = 500 - 21.96 = 478.04 ml

Therefore, the chef should use 478.04 ml of Italian dressing and 21.96 ml of vinegar to make 500 ml of a mixture that contains 2% vinegar.


Learn more about concentration here:

https://brainly.com/question/10720472

#SPJ4

Molar mass of MgF2 = 62.30 g/mol and freezing point = 0 °C - 0.764 °C = -0.764 °C

a) To calculate the freezing point depression of a solution, we can use the formula:

ΔTf = Kf x molality

where ΔTf is the change in freezing point, Kf is the freezing point depression constant for the solvent (water) and molality is the concentration of the solute (FeCl3) in moles per kilogram of solvent (water).

The molality of the solution can be calculated as follows:

mass of FeCl3 = 10.6 g

molar mass of FeCl3 = 162.2 g/mol

moles of FeCl3 = mass / molar mass = 10.6 g / 162.2 g/mol = 0.0654 mol

mass of water = 159 g

molality = moles of solute / mass of solvent (in kg) = 0.0654 mol / 0.159 kg = 0.411 mol/kg

The freezing point depression constant for water is 1.86 °C/m. Thus, the change in freezing point can be calculated as follows:

ΔTf = Kf x molality = 1.86 °C/m x 0.411 mol/kg = 0.764 °C

The freezing point of pure water is 0 °C, so the freezing point of the solution is:

freezing point = 0 °C - 0.764 °C = -0.764 °C

b) To calculate the boiling point elevation of a solution, we can use the formula:

ΔTb = Kb x molality

where ΔTb is the change in boiling point, Kb is the boiling point elevation constant for the solvent (water) and molality is the concentration of the solute (KCl) in moles per kilogram of solvent (water).

The molality of the solution can be calculated as follows:

mass of KCl = 3.9 g

molar mass of KCl = 74.55 g/mol

moles of KCl = mass / molar mass = 3.9 g / 74.55 g/mol = 0.0523 mol

mass of water = 100 g (assuming the total mass of the solution is 103.9 g, with 3.9 g KCl and 100 g water)

molality = moles of solute / mass of solvent (in kg) = 0.0523 mol / 0.1 kg = 0.523 mol/kg

The boiling point elevation constant for water is 0.52 °C/m. Thus, the change in boiling point can be calculated as follows:

ΔTb = Kb x molality = 0.52 °C/m x 0.523 mol/kg = 0.272 °C

The boiling point of pure water is 100 °C, so the boiling point of the solution is:

boiling point = 100 °C + 0.272 °C = 100.272 °C

c) To calculate the freezing point depression of a solution, we can use the formula:

ΔTf = Kf x molality

where ΔTf is the change in freezing point, Kf is the freezing point depression constant for the solvent (water) and molality is the concentration of the solute (MgF2) in moles per kilogram of solvent (water).

The molality of the solution can be calculated as follows:

molarity of MgF2 = 0.168 mol/L

molar mass of MgF2 = 62.30 g/mol

mass of MgF2 in 1 L of solution = molarity x volume x m

Find out more about  freezing point

brainly.com/question/30675499

#SPJ4

1. All objects fall to the ground at the same rate regardless of their mass.  Law: This is a statement of Newton’s law of gravity, which states that the force of gravity is equal for all objects regardless of their mass.

According to Newton's law of gravity, every particle in the cosmos is drawn to every other particle with a force that is inversely proportional to the square of the distance between them and directly proportional to the product of their masses. Sir Issac Newton created this law of gravity in 1687. According to this law, the gravitational force is always attracting and works along the line connecting the two particles. In the formula F=Gm1m2/r2, where G is the universal gravitational constant, m1 and m2 are the masses of the two interacting particles, and r is the distance between them, the gravitational force's magnitude is given.

This law has been used to explain the motion of the planets, moons, and other celestial bodies and is thought to be crucial to comprehending the motion of bodies in the universe.

To learn more about Newton’s law of gravity

https://brainly.com/question/28171613

#SPJ1

In Benedict's experiment, sulfuric acid is utilised as a catalyst to speed up the reaction between the copper (II) ions in the reagent and the reducing sugars.

A laboratory technique called Benedict's test is used to find reducing sugars in a sample. The sample is heated after being mixed with Benedict's reagent, a blue solution containing copper (II) ions, in order to conduct the test. The copper ions in the reagent will be reduced if reducing sugars are present in the sample, which will result in the production of a reddish-brown precipitate. The quantity of reducing sugars in the sample is indicated by how strongly the colour changes. In the food sector, the Benedict's test is frequently used to estimate the content of reducing sugars including lactose, fructose, and glucose in foods.

Learn more about Benedict's test. here:

https://brainly.com/question/25800056

#SPJ4

Freezing point depression requires a solution to occur. Brine starts as a solution, where solid salt must form a solution first. The brine solution can more evenly coat the surface of the road, making the ice prevention more widespread.

Brine solution is the NaCl solution in  water at very higher concentration. It forms in salt lakes and sea water. Brine solution is a commercially important one.

Brine solution is an effective solution to de-ice than traditional solid ice-melt. Normal solid salt crystals have to be dissolved first . Whereas, brine is already a solution.

Freezing point depression requires a solution to occur. The brine solution can more evenly coat the surface of the road, making the ice prevention more widespread.

Find more on brine solution:

https://brainly.com/question/7613599

#SPJ1

a saline solution was made by dissolving 1.69 g sodium chloride in 200 ml distilled water,then the concentration of salt in the solution is 8.45 g/L.

To find the concentration of salt in the solution, we need to divide the amount of salt (in grams) by the volume of the solution (in liters).

First, we need to convert the volume from milliliters (mL) to liters (L):
200 mL = 0.2 L

Next, we can calculate the concentration of salt:
concentration = amount of salt / volume of solution
concentration = 1.69 g / 0.2 L
concentration = 8.45 g/L

Therefore, the concentration of salt in the solution is 8.45 g/L.

Learn more about concentration here:

https://brainly.com/question/10720472

#SPJ4

The bonding that involves the transfer of electrons to form cations and anions is known as ionic bonding.

Ionic bond, additionally known as electrovalent bond, form of linkage fashioned from the electrostatic appeal among oppositely charged ions in a chemical compound. Such a bond paperwork while the valence (outermost) electrons of 1 atom are transferred completely to some other atom. Ionic bonding is the entire switch of valence electron(s) among atoms. It is a form of chemical bond that generates oppositely charged ions. In ionic bonds, the steel loses electrons to emerge as a undoubtedly charged cation, while the nonmetal accepts the ones electrons to emerge as a negatively charged anion.

To learn more about ionic bond check the link below:

https://brainly.com/question/957239

#SPJ4

Because the pH of amniotic fluid is usually > 7.2, bromothymol turns blue when it comes into contact with the fluid leaking from the amniotic membrane. The pH of the vagina is usually acidic, so blue indicates the presence of amniotic fluid.

Bromothymol blue is a pH indicator. It is mainly used in applications where substances with a relatively neutral pH (approximately 7) must be measured. It is commonly used to measure the presence of carbonic acid in a liquid. It is usually sold in solid form as the sodium salt of an acid indicator.

Bromothymol blue can be used to monitor photosynthetic activity or as an indicator of respiration (turns yellow when CO2 is added). A common demonstration of the properties of the BTB pH indicator involves exhaling into a neutral BTB solution through a tube. The solution changes color from green to yellow as CO2 is absorbed into the solution by breathing to form carbonic acid. Therefore, the BTB is commonly used in science classes to prove that the more muscles involved, the higher the CO2 emission.

It can also be used in laboratories as a dye for biological preparations. At this point the bromothymol is already blue and uses a few drops of BTB on the waterslide. Mix the sample with the blue BTB solution and fix it on a glass slide with a coverslip. It is sometimes used to identify cell walls or nuclei under a microscope.

Bromothymol is used in obstetrics to detect premature rupture of the amnion. Since the pH of amniotic fluid is typically > 7.2, bromothymol turns blue when it comes in contact with amniotic fluid. The pH of the vagina is usually acidic, so blue indicates the presence of amniotic fluid. The test may be false positive in the presence of other alkaline substances such as blood or semen, or in the presence of bacterial vaginosis.

Learn more about amniotic membrane:

https://brainly.com/question/1177725

#SPJ4

Mafic and felsic minerals and rocks are both types of igneous rocks, which form when magma or molten rock cools and crystallizes.

Mafic minerals and rocks are composed of dark-colored minerals, such as olivine, pyroxene, amphibole, and biotite. These minerals tend to be high in magnesium and iron, and are relatively low in silica. As a result, mafic rocks are denser and heavier than felsic rocks.

Felsic minerals and rocks, on the other hand, are composed of light-colored silicate minerals, such as quartz, feldspar, and muscovite. These minerals are high in silica and low in magnesium and iron. As a result, felsic rocks are less dense and lighter than mafic rocks. Felsic rocks often form in more explosive volcanic eruptions, while mafic rocks form in quieter eruptions. Finally, felsic rocks tend to have a light-colored or white appearance, while mafic rocks are typically dark gray or black.

To learn about felsic click here https://brainly.com/question/12932113

#SPJ4

The oxidation state of an individual sulfur atom in SO32- (sulfite ion) is +4.

The oxidation state of an element in a chemical species is a measure of the degree of oxidation (loss of electrons) or reduction (gain of electrons) of that element in the species. In general, the oxidation state of an element in a neutral compound is zero, while in an ion, it is equal to the charge on the ion.

In the sulfite ion, SO32-, the sulfur atom has an oxidation state of +4. This means that it has lost four electrons compared to its neutral state.

The three oxygen atoms in the ion have an oxidation state of -2 each, so their total contribution to the charge on the ion is -6. To balance this, the sulfur atom must have a charge of +6, which is achieved by assigning an oxidation state of +4 to the sulfur atom.

To learn more about Oxidation state :

https://brainly.com/question/28793261

#SPJ4

As mechanism 2 matches the given rate law, the correct answer is: only mechanism 2 is consistent with the rate law.

To determine which mechanism is consistent with the experimentally determined rate law, we need to check if the predicted rate law for each mechanism matches the given rate law.

The given rate law is: rate = k [X][Y₂]

Mechanism 1:

The slow step is the formation of X radicals from X₂, which is a bimolecular reaction. The intermediate X formed in the first step then reacts with Y₂ to form XY₂, and this intermediate reacts with X to form the final product X₂Y₂. Since the rate-determining step involves only X₂, we can assume that the rate law is determined by the concentration of X₂ only, and the rate law for mechanism 1 is therefore: rate = k[X₂]. This does not match the given rate law, so mechanism 1 is not consistent with the rate law.

Mechanism 2:

The slow step is again the formation of X radicals from X₂. The intermediate XY formed in the second step then reacts with Y to form X₂Y, and this intermediate reacts with Y to form the final product X₂Y₂. The rate-determining step involves X₂, XY, and Y, so we can write the rate law for mechanism 2 as:

rate = k [X₂][XY][Y].

Simplifying this rate law using the equilibrium constant for the fast equilibrium XY₂ ⇌ XY + Y₂, we can rewrite it as:

rate = k [X₂][Y₂]/K

This matches the given rate law, so mechanism 2 is consistent with the rate law.

Learn more about rate law here: brainly.com/question/16981791

#SPJ4