Conservation of momentum
The total momentum of three pieces immediately after the explosion is
What is Conservation of Momentum?Along with the conservation of energy and the conservation of mass, the conservation of momentum is a fundamental principle of physics. The definition of momentum is the product of an object's mass and velocity. According to the principle of momentum conservation, momentum is only modified by the action of forces as they are outlined by Newton's equations of motion; momentum is never created nor destroyed inside a problem domain. Because momentum is a vector quantity with both a magnitude and a direction, dealing with momentum is more challenging than dealing with mass and energy. At the same time, momentum is conserved in all three physical directions.
Calculation:The total momentum of three pieces immediately after the explosion is
to refer more about Conservation of momentum visit:
https://brainly.com/question/22257327
#SPJ4
a solenoid having an inductance of 6.30 ph is connected in series with a 1.20 k() resistor. (a) if a 14.0 v battery is connected across the pair, how long will it take for the cnrrent through the resistor to reach 80.0% of its final value? (b) what is the current through the resistor at time / - 1.0ry
(a)If the battery is inserted into the circuit at time t=0, then at time t, the current is provided by i=/R(1et/L), where L=L/R. The moment that i=0.800dR must be found is our objective. This suggests that 0.800=1 et/L and 0.200 et/L.
We get (t/L)=ln(0.200)=1.609 by taking the natural logarithm of both sides. Thus,[tex]t=1.609τ L = R1.609L = 1.20×10 3 Ω1.609(6.30×10 −6 H) =8.45×10 −9 s[/tex].
What three purposes does a resistor serve?There are various uses for resistors. A few examples include restricting the flow of electricity, dividing the voltage, producing heat, matching and loading circuits, controlling gain, and establishing time constants.
To know more about Resistor visit:
https://brainly.com/question/24297401
#SPJ4
construct a graph corresponding to the stone's vertical velocity, vy(t).
Graph corresponding to the stone's vertical velocity, vy(t) is slant line from 1st quadrant to 4th quadrant.
Assume, For time direction 0 to 2 seconds
V = Vo - gt
At T = 2 sec; V = 0
so, 0 = Vo - 20
Vo = 20 m/s
From T = 2 sec to T = 6sec
V = 0 - gt = -10 t
hence
Velocity vs time graph is in figure.
An object's speed and direction on a vertical plane are referred to as vertical velocity. Vertical velocity can be used to describe a variety of objects, including coins dropped into wells by children and balls flung into the air. Gravity, which constantly acts on an item to change its velocity, is a crucial factor in vertical velocity. As the ball ascends, its speed will progressively slow until it eventually comes to a stop, modifies its course, and returns to earth. Anywhere along the ball's course, its velocity can be expressed as a number. The number's sign (positive or negative) indicates the ball's direction, and its value indicates the ball's speed.
Learn more about vertical velocity here:
https://brainly.com/question/11679227
#SPJ4
a screen is placed 40.0 cm from a single slit, which is illuminated with light of wavelength 690 nm. if the distance between the first and third minima in the diffraction pattern is 2.60 mm, what is the width of the slit?
The width of the slit is 0.212 mm.
The wavelength of light is defined as “The distance between the two successive crests or troughs of the light wave”.
We know that the distance between minima is given by :
[tex]t = (m_{f} - m_{i} ) \alpha x/d[/tex]
where, t = distance between minima
[tex]\alpha =[/tex] wavelength
x = distance of screen
d = width of slit
[tex](m_{f} - m_{i} ) =[/tex] difference between minima
Given, x = 40 cm = 0.4 m
[tex]\alpha = 690 nm = 690 * 10^{-9} m[/tex]
t = 2.60 mm = [tex]2.60 * 10^{-3} m[/tex]
[tex](m_{f} - m_{i} ) =[/tex] 3 -1 = 2
Putting these values in above equation we get d = 0.212 mm
So the width of the slit is 0.212 mm.
To know more about Light visit:
https://brainly.com/question/13156031
#SPJ4
An 18 kg curling rock is pushed with a constant force of 13.0 N. The
curling rock has an initial speed of 1.5 m/s. Assuming there is no friction
determine the speed of the rock after it has travelled 2.1 m.
The speed of the rock after it has travelled 2.1m is 2.3 approx.
What is speed?Speed is simply defined as the rate of change of position of an object in any direction.
Here mass is m = 18 kg
Initial velocity is 1.5 m/s
So initial kinectic energy,1/2 mv ^ 2= 1/2 (18) 1.5(1.5) = 20.25 J
Then the workdone is ,W= F.s= 13(2.1) = 27.30
Using work energy theorem
Final KE- intial KE = workdone
==> Final KE = workdone + intial KE
Or Final KE = 27.30+20.25= 47.55 J
Then 1/2 M v^ 2 = 47.55 J
Or Final velocity V= 2.3 approx.
To know more about speed click-
https://brainly.com/question/24739297
#SPJ1
Hello! I need a fast response
does the result of the forces, according to Newton's second law, include the force of weight?
Tnx in advance
Answer:
Yeah exactly.
Explanation:
Look here down.
From Newtond second law of motion.
F= △P/tF= P2 -P1 ,Since Pmomentum = Mv tF= Mv2 - Mv1 tF= M(V2-V1) Since v2 -v1 = a t t※F=MaAnd this force is included the force of weight which changes from ma to mg
(F=ma) How much force is required to move a 10 kilogram object 10 meters per second squared?
Question 2 options:
A. 10 - 10 = 0
B. 100 Newtons
C. 100
D. 20 Newtons
Answer:B. 100 Newtons
Explanation:
F=ma, this mean that the force is equal to the mass (10 kg) multiplied by the acceleration (10 [tex]m/s^{2}[/tex]). Plug mass and acceleration to solve: [tex]F=10*10[/tex] ∴ [tex]F=100[/tex].
The required force to move a 10 kilogram object 10 meters per second squared be 100 Newton. So, Option(B) is correct.
What is force?The definition of force in physics is: The push or pull on a mass-containing item changes its velocity.
An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude. The application of force is the location at which force is applied, and the direction in which the force is applied is known as the direction of the force.
Given parameters:
Mass of the object = 10 kilogram.
Acceleration of the object: a = 10 meter per second squared.
So, from Newton's 2 nd law of motion, we get:
required force = mass × acceleration
= 10 × 10 Newton
= 100 Newton.
Hence, required force to move a 10 kilogram object 10 meters per second squared be 100 Newton.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ2
Which of the following expression is correct for radiation efficiency?
a) ηr=PrPl
b) ηr=PrPr−Pl
c) ηr=PrPr+Pl
d) ηr=PlPr+Pl
The ratio of power emitted to the total power applied to the antenna is known as radiation efficiency. The equation for radiation efficiency, r=PrPr+Pl, is accurate.
How is radiation efficiency determined?
The ratio of an antenna's output power to the power input into its excitation port is known as the radiation efficiency of the antenna. Here, the power loss resulting from port impedance mismatch is not taken into account. The radiation effectiveness of a lossless antenna in its ideal
What are total efficiency and radiation efficiency?
Losses in the conductor and the dielectric dissipate the power that is not radiated. Total efficiency measures how much power is incident from the network and how much is radiated, taking into account both reflection loss and energy dissipation.
To know more about radiation efficiency visit:
https://brainly.com/question/29823998
#SPJ4
A space probe is traveling in outer space with a momentum that has a magnitude of 7.5*10^7kgm/s. A retrorocket is fired to slow down the probe .it applies a force to the probe that has a magnitude of 2.0*10^6N and a direction opposite to the probes motion .. it fires for a period of 12s. Determine the momentum of the probe after the retrorocket ceases to fire
The momentum of the probe Pf = + 5.1 x [tex]10^{7 }[/tex] kg m/s.
What is the impulse momentum theorem formula?Δ p = F net Δ t . The equation is known as the impulse-momentum theorem. F net t F net t is referred to as the impulse. According to the equation, the impulse is equal to the average net external force times how long it takes for that force to act. It is equivalent to the momentum shift.According to the impulse-momentum theorem, an item will experience an impulse that is equal to the change in its momentum. We can now see how the impulse-momentum theorem demonstrates how a modest net force applied over a prolonged period of time can result in the same velocity change as a big net force delivered over a brief period of time.Find the attachment answer
Learn more about impulse momentum theorem refer to :
https://brainly.com/question/14121529
#SPJ1
Need help please help
Work = (force) x (distance)
Force exerted on the box = 10 Newtons
Dictance the box travels = 6 meters
Work = (force) x (distance)
Work = (10 N) x (6 meters)
Work = 60 Newton-meters
Work = 60 Joules (A)
Mass of the box . . . . . . .. |
Coefficient of friction . . . | We don't care about
Force of friction . . . . . . .. | any of these things.
Color of the box . . . . . . . | They don't matter
Price of the box . . . . . . .. | or make any difference.
Contents of the box . . .. |
Temperature of the box.|
Dimensions of the box .. |
Age of the box . . . . . . . . |
16. Ice has lower density than water because ice: A) molecules vibrate at lower rates than water molecules: B) molecules are more compact in the solid state. sinks_ is made of open-structured, hexagonal crystals: closed sealed can of air placed ona hot stove. The contained air undergoes an Consider increase in: A) volume_ B) mass_ density . pressure and temperature. 18_ Diffraction is a result of: A) refraction: B) reflection. dispersion: interference_ thin film on water are demonstration of: Colors seen when gasoline forms interference_ B) refraction _ C) dispersion. D) reflection_ 19_ 20. Flectromagnetic waves can travel: through a vacuum. through medium through either & medium o a vacuum: D) through a current:
When water freezes, the water molecules create a crystalline structure that is held together by hydrogen bonding.
define density ?
The density of a material indicates the density of that material in a specified region. The density of a substance is defined as its mass per unit volume. Density is a measurement of how closely stuff is packed together. It is a distinct physical attribute of a certain thing. Archimedes, a Greek scientist, developed the density principle. If you know the formula and understand the units, calculating density is simple. The sign indicates density, which may also be represented by the letter D.
Water molecules develop a crystalline structure when it freezes, which is sustained by hydrogen bonding. The density of solid water, or ice, is lower than that of liquid water. Because the orientation of hydrogen bonding leads molecules to push further apart, ice has a lower density than water.
To learn more about density follow the given link:https://brainly.com/question/1354972
#SPJ1
the greatest hurdle that must be overcome to fully embrace nuclear power to generate electricity is
The biggest challenge to fully embracing nuclear power for the production of electricity is the safe storage of radioactive waste.
Uranium that is of excellent purity is in short supply. A nonrenewable energy source is nuclear power. It is challenging to properly dispose of nuclear waste. It is challenging to properly dispose of nuclear waste. In order to save the climate, we must reduce carbon emissions as much as possible quickly and cheaply. The operational risks and safety concerns that go along with them, risks associated with uranium mining, financial and regulatory risks, unresolved waste management issues, concerns about nuclear weapons proliferation, and unfavourable public perception are all obstacles to and risks associated with an increase in the use of nuclear energy. Ionizing radiation is toxic at high doses.
To learn more about nuclear power click here https://brainly.com/question/18769119
#SPJ4
Indicate which of the following physics symbols denote units in which denote variables or quantities
There are a few different physics symbols that denote units, variables, or quantities:
Units: In physics, units are used to measure physical quantities. Some common units in physics include meters (m) for distance, kilograms (kg) for mass, and seconds (s) for time.Variables: Variables are quantities in physics that can take on different values. Some common variables in physics include position (x), velocity (v), and acceleration (a).Quantities: Quantities are physical quantities that can be measured. Some common quantities in physics include force (F), energy (E), and power (P).So, to summarize, units are used to measure physical quantities, variables are quantities that can take on different values, and quantities are physical quantities that can be measured.
helicopter blades withstand tremendous stresses. in addition to supporting the weight of a helicopter, they are spun at rapid rates and experience large centripetal accelerations, especially at the tip. calculate the centripetal acceleration at the tip of a 4.00 m long helicopter blade that rotates at 270 rev/min.
4,860m/s² centripetal acceleration at the tip of a 4.00 m long helicopter blade that rotates at 270 rev/min.
What is Centripetal acceleration?The rate at which tangential velocity changes is known as centripetal acceleration. Centripetal force is defined as the total force that accelerates an item in a circular motion. The centripetal force points in the direction of the centre, perpendicular to the body's motion.
What is rotation?An object moves in a circular motion around a central axis when it is rotating or spinning. A two-dimensional spinning object can rotate in either a clockwise or counterclockwise direction and has a single potential central axis. There are countless central axis and rotational directions that can be used to describe a three-dimensional object.
Calculation:
Centripetal acceleration = ac = w². r
= (270)² × 4 = 4,860m/s²
Hence, 4,860m/s² centripetal acceleration.
To know more about Centripetal acceleration, check out:
https://brainly.com/question/79801
#SPJ4
starting from rest, a 94-kg firefighter slides down a fire pole. the average frictional force exerted on him by the pole has a magnitude of 800 n, and his speed at the bottom of the pole is 3.9 m/s. how far did he slide down the pole?
The firefighter will slide down upto a distance of 11.68 m.
A firefighter is a first responder with extensive training in firefighting, primarily to extinguish dangerous fires that threaten life, property and the environment, as well as to rescue people and, in some cases or jurisdictions, animals from dangerous situations.
Mass of the firefighter = m = 94kg
Frictional force = F = 800N
Speed at the bottom of the pole = 3.9m/s
Using the work energy theorem which says that initial potential energy is equal to the sum of final kinetic energy and work done.
mgh = (1/2)mv² + W
mgh = (1/2)mv² + Fh
h = height at which firefighter will slide down
h (mg - F) = (1/2)mv²
h = (1/2)mv² / (mg - F)
h = mv² / 2 (mg-F)
h = 94* (3.9)² / 2 (922.14 - 800)
h = 1429.74/122.14
h = 11.68 m
He will slide 11.68 m down the pole.
To know more about firefighter,
https://brainly.com/question/13778231
#SPJ4
on the moon your mass would be less but your weight would be the same true or false
Answer:
false
Explanation:
your mass would be the same but you would weigh less
in a double-slit experiment it is found that blue light of wavelength 446 nm gives a second-order maximum at a certain location on the screen. what wavelength of visible light would have a minimum at the same location?
Wavelength of 594.6 nm of visible light would have a minimum at the same location.
For constructive interference
d sinQ=ml=2x436nm=892nm
For destructive interference of the other light, we have
d sinQ=(m’+1/2)l
where, d = distance between slits
Q = angle formed
m = order of bright fringe
m' = order of dark fringe
I = wavelength
When the two angle are equal, then
892nm=(m’+1/2)l
l=1784 nm for m’=0
l=613 nm for m’=1
l=368 nm for m’=2
To know more about wavelenghts visit:
https://brainly.com/question/16957468
#SPJ4
a 240 g bird flying along at 6.0 m/s sees a 12 g insect heading straight toward it with a speed of 30 m/s. the bird opens its mouth wide and enjoys a nice lunch. what is the bird's speed immediately after swallowing the insect?
4.28 m/s is the bird's speed immediately after swallowing the insect.
A) The birds speed after swallowing the insect is = 4.84 m/s
Given data :
mass of bird ( M₁ ) = 240 g
speed of bird ( U₁ ) = 6 m/s
mass of insect ( M₂ ) = 12 g
speed of insect ( U₂ ) = 30 m/s
Determine the birds speed of the bird
A) Birds speed after swallowing the insect
we will apply the principle of momentum conservation
M₁U₁ + M₂U₂ = ( M₁ +M₂ )V
= 240*6 - 12*30 = ( 240 + 12 ) V
= 1440 - 360 = 252 V
therefore ; V = 1080 / 252 = 4.28 m/s is the bird's speed.
learn more about speed here:
https://brainly.com/question/13943409
#SPJ4
If a rock is thrown
with an initial velocity of 5.4 m/s in the y-
direction and 8.2 m/s in the x-direction.
At what angle was the rock thrown?
The angle at which the rock was thrown is 33.37°.
What is angle?An angle is formed when two rays are joined together at a common point.
To calculate the angle at which the rock was thrown, we use the formula below.
Formula:
∅ = tan⁻¹(Vy/Vx)................ Equation 1Where:
∅ = Angle at which the rock was thrownVy = Velocity of the rock in y- directionVx = Velocity of the rock in x-directionFrom the question,
Given:
Vy = 5.4 m/sVx = 8.2 m/sSubstitute these values into equation 1
∅ = tan⁻¹(5.4/8.2)∅ = tan⁻¹(0.6585)∅ = 33.37°Hence, the angle is 33.37°.
Learn more about angle here: https://brainly.com/question/25215131
#SPJ1
the direction of the force of sliding friction is always select one to that of velocity of the object and is select one static friction. State True or False your answer:
a. True
b. False
The given statement was false as sliding friction is lower than static friction.
what is Sliding friction ?
The friction experienced by two bodies in a comparable sliding motion is referred to as sliding friction. Sliding friction, like any other form of friction, may produce wear and tear on moving bodies.
Kinetic friction is a notion that defines the friction that happens as something slides. Because sliding friction is lower than static friction, moving a moving body is much easier than moving a stationary body (rest).
In contrast, the frictional force associated with a sliding motion is typically substantially larger. Although sliding friction is unaffected by surface area or total area of contact, it is greatly impacted by two factors: the kind of moving objects and their mass.
The given statement was false as sliding friction is lower than static friction.
To learn more about static friction follow the given link:https://brainly.com/question/14382762
#SPJ1
the mass of a proton is 1.00728 amu and that of a neutron is 1.00867 amu. what is the approximate binding energy (in j) of a 29co nucleus?
The binding energy per nucleon = 1.368*10^-12
What is energy?
Energy, which is observable in the performance of work as well as in the form of heat and light, is the quantitative property that is transferred to a body or to a physical system in physics. It is a mechanically accepted quantity.
The mass of a proton is 1.00728 amu
The mass of a neutron is 1.00867 amu
The mass of a cobalt-60 nucleus is59.9338 amu
Step 2: Calculate binding energy
The mass defect = the difference between the mass of a nucleus and the total mass of its constituent particles.
Cobalt60 has 27 protons and 33 neutrons.
The mass of 27 protons = 27*1.00728 u = 27.19656 u
The mass of 33 neutrons = 33*1.00867 u = 33.28611 u
Total mass of protons + neutrons = 27.19656 u + 33.28611 u = 60.48267 u
Mass of a cobalt60 nucleus = 59.9338 amu
Mass defect = Δm = 0.54887 u
ΔE =c²*Δm
ΔE = (3.00 *10^8 m/s)² *(0.54887 amu))*(1.00 g/ 6.02 *10^23 amu)*(1kg/1000g)
Step 3: Calculate binding energy per nucleon
ΔE = 8.21 * 10^-11 J
8.21* 10^-11 J / 59.9338 = 1.368 *10^-12
Complete Quetion:-The mass of a proton is 1.00728 amu andthat of a neutron is 1.00867 amu. What is the binding energy pernucleon (in J) of a Co nucleus? (The mass of a cobalt-60 nucleus is59.9338 amu.) a. 3.039× 10^-12 b. 2.487 × 10^-12 c. 7.009 × 10^-14 d. 1.368 × 10^-12 e. 9.432 × 10^-13
To learn more about visit
https://brainly.com/question/1932868
#SPJ4
A converging lens is used to project the image of an arrow onto a screen as shown. The image is A) Real and upright B) Real and inverted C) Virtual and upright D) Virtual and inverted E) Impossible to determine
The correct option is B); Real and inverted , Since, the image is formed on the other side of lens it will be real and inverted.
When an item is positioned in front of the focal point of a converging lens, a virtual picture is created. The picture is enlarged and upright in this posture, making it simpler to observe.
When the rays come together, a true image is created. A virtual picture is always created above the primary axis, therefore it is always upright, as opposed to a real image, which is always formed below the principal axis and is always inverted.
A actual and inverted picture of an item positioned on the primary axis can only be formed by a convex lens.
While virtual pictures are created by diverging beams, real images are created by intersecting rays. While virtual pictures cannot be shown on a screen, real images may. Concave and convex lenses placed in opposition create real pictures.
Learn more about to converging lens visit here;
https://brainly.com/question/14299912
#SPJ4
now barry imagines he is on a boat and he decides to go for a swim, and that the captain gives barry a choice of two life preservers, one filled with styrofoam and an identically sized one filled with lead. which life preserver, when placed in the water, will kachina say has the greater buoyant force?
As long as their contents are the same, the buoyant force is stronger on the life jacket that is filled to the same level when both are totally immersed.
What does science mean by "force"?In science, "force" refers to a certain concept. An object cannot hold a force; it is impossible. A force is experienced by one item from another. In the notion of a strength, both of these would be intriguing inanimate objects.
What are force and example?The word "energy" refers to a body's innate propensity to alter or adapt its structure in response to an outside force. each time a force is used.
To know more about Force visit:
brainly.com/question/13191643
#SPJ4
describe the differences between heat transfer through conduction, radiation, and convection.
Heat transfer in conduction is slow, heat transfer in convection is faster than conduction and heat transfer in radiation is the fastest.
The heat transfer takes place due to the difference in temperature. Heat transfer occurs between objects by direct contact in conduction. In this, heat transfer occurs through a heated solid object. Heat transfer takes within the fluid in convection. In this process heat transfer takes place due to difference in densities. Heat transfer occurs through electromagnetic waves and without involving particles in radiation. Heat transfer in conduction is slow, heat transfer in convection is faster than conduction and heat transfer in radiation is the fastest.
To learn heat transfer visit the link- https://brainly.com/question/16055406
#SPJ4
using your multimeter, measure the dc resistance of the 100 mh inductor supplied in the parts kit. draw a model for the real inductor that includes this resistance. compute the maximum time constant for this component. do you think you could see the change of current with time with your multimeter?
The time constant is 0.974 sec when measured with the multimeter for the resistance of the 100 mh inductors.
What is Time constant?
The product of the circuit resistance and the circuit capacitance determines the RC time constant, often known as tau, the time constant (in seconds) of an RC circuit. It is the amount of time needed to charge a capacitor through a resistor from zero starting charge voltage to roughly 63.2% of the applied DC voltage or to discharge a capacitor to roughly 36.8% of its initial charge voltage through the same resistor.
What is an inductor?An inductor is a passive electronic component that, when an electric current passes through its coil, momentarily stores energy in a magnetic field.
calculations:
Observed resistance = 102.6Ω
DC resistance R = 102.6Ω
L = 100mH
Time constant ρ = L/R
= 100/102.6
=0.974 sec.
Hence, the time constant is 0.974 sec when measured with the multimeter for the resistance of the 100 mh inductors.
To know more about time constant, check out:
https://brainly.com/question/29561276
#SPJ4
An object is shot upwards, from the ground, with an initial velocity of
120 m/s. How high will it be after 4.0s?
Answer:
Below
Explanation:
Distance will be given by the equation:
df = do + vo t + 1/2 a t^2 do = 0 a = -9.81 m/s^2
df = 0 + 120 (4) + 1/2(-9.81)4^2 = 401.5 m
Multiple choice
There is a positive correlation between one's level of
A. cognitive anxiety and somatic anxiety
B. trait anxiety and state anxiety
C. arousal and stress
D. a and c
E. b and c
There is posetive correlation between one's level of cognitive anxiety and somatic anxiety.
What is correlation?Correlation is a statistical of the measure that is expresses the extent to the which two variables are the linearly related (meaning they change together at its constant rate). It's a common tool for describing simple relationships without making a statement about cause and effect.
An individual with higher of the trait anxiety score tends to the higher state anxiety score. Scores of state anxiety are rated high in the circumstances where an individual feels the situation to be threatening irrespective of the objective danger.
It means the higher the level of the somatic or cognitive anxiety experience by the athletes, the lower sport to performance. The relationship between somatic and cognitive anxiety was explained best in Multidimensional Anxiety Theory. This theory explains by that both cognitive and somatic anxiety effect performance.
To know more about correlation click-
https://brainly.com/question/27842223
#SPJ1
i. neutrinos are very abundant in the universe (our sun for example produces them in huge amounts as as by-product of nuclear fusion). a recent discovery has given them a (tiny) amount of mass. discuss how this would/could change our view of whether the expansion of the universe is slowing or not. (hint: think about gravity and potential energy due to gravity) ii. disuss why our sun has a stable (constant) radius. what supports it against gravitational collapse? iii. disuss why a neutron star has a stable (constant) radius. what supports it against gravitational collapse?
Gravitational collapse is the contraction of an astronomical object because of the impact of its personal gravity, which tends to draw count inward in the direction of the middle of gravity.
Gravitational collapse apart is a fundamental mechanism for structure formation within the universe.
At a low mass, gravity may be counteracted by way of a low pressure, which means that low pressure and density. as the mass will increase, the pressure increases, and eventually either the temperature or the density is adequately high to motive gravitational collapse.
The universe is everything. It consists of all of space, and all of the be counted and power that area includes. It even consists of time itself and, of route, it consists of you. Earth and the Moon are part of the universe, as are the alternative planets and their many dozens of moons.
Learn more about universe here :-
https://brainly.com/question/805395
#SPJ4
what was the hiker's average velocity during part b of the hike? responses 0.6 km/h north 0.6 km/h north 0.17 km/h south 0.17 km/h south 6 km/h south 6 km/h south 10 km/h southeast
The hiker's average velocity during part B of the hike is 6 km/h South.
Given the following data:
Total distance = 6 km, South.
Start time = 9:45 am
Ending time = 10:45 am
To determine hiker's average velocity during part B of the hike:
First of all, we would determine the total time.
Total time = Ending time - starting time
Total time = 10:45 - 9:45
Total time = 1 hour.
Mathematically, the average velocity is given by the formula:
Average velocity = total distance / total time
Substituting the parameters into the formula, we have;
Average velocity = 6/1
Average velocity = 6 km/h South.
Therefore, the average velocity of the biker is 6 km/h South
To know more about velocity, refer: https://brainly.com/question/29705785
#SPJ4
is the coefficient of static friction always constant between the same two surfaces? explain how you know.
Due to the fact that it is more difficult to initiate motion than to maintain it, the coefficient of kinetic friction is almost always lower than the coefficient of static friction.
What is static friction ?The form of friction between static or motionless surfaces is known as static friction. On the other hand, kinetic friction is the resistance between two surfaces while at least one of them is moving.
Due to the fact that there are more forces operating to maintain an object stationary on a given surface than there are forces resisting an object in motion, the coefficient of static friction is always greater than or equal to the coefficient of kinetic friction.
To know more about static friction you may visit the link:
https://brainly.com/question/13000653
#SPJ4
a radio mostly consists of an lc circuit with a variable capacitor. turning the dial of the radio changes the capacitance of the circuit. you hear a radio station when the frequency of the lc circuit matches the frequency of light from the radio station. the variable capacitor in the tuner of an am radio has a capacitance of 1350pf when the radio is turned to a station at 550khz. [10 points] a. what must be the capacitance for a station at 1600khz? [7 points] b. what is the inductance (assumed to be constant)? [3 points]
The capacitance of the circuit is C = 8.382 F
What is an LC circuit ?A signal at a specific frequency can be detected or produced using LC circuits. The most typical use of tank circuits is for tuning radio transmitters and receivers. The LC circuits, for instance, create a resonance for that carrier frequency when you tune a radio to a particular station.
Given : a LC circuit
and the frequency given is 550khz = 550000 Hz
w = 2πf
and w = [tex]\sqrt{\frac{1}{LC} }[/tex]
this implies;
2πf = [tex]\sqrt{\frac{1}{LC} }[/tex]
On squaring both sides we get
4pi^2f^2 = [tex]\frac{1}{LC}[/tex]
thus C = [tex]\frac{1}{4pi^2f^2}[/tex]
after substituting the value in this equation we get;
C = 1/ ( 4 × 3.14 × 3.14 × 550 × 550 )
C = 8.382 F
Thus the capacitance is C = 8.382 F
To know more about capacitance you may visit the link:
https://brainly.com/question/12644355
#SPJ4
