What is the vapor pressure of a sugar solution dependent on?

The molar mass of 34.26 g/mol corresponds to the molar mass of nitrogen gas (N2) which is 28.02 g/mol. So the unknown gas is probably nitrogen.

To identify an unknown gas, we need to determine its molar mass. You can use the ideal gas law to calculate the molar mass. The ideal gas law is:

PV = nRT

where P is pressure, V is volume, n is number of moles, R is gas constant, and T is temperature in Kelvin. To calculate the molar mass, rearrange the ideal gas law and solve for n.

n = PV/RT

The value of the gas constant R is 0.0821 L-atm/mol-K. To convert temperature to Kelvin, add 273.15 to the temperature in °C. Pressure must be converted from torr to atm. One atmosphere equals 760 torr, so:

P = 209 torr / 760 torr/atm

P = 0.2758 atmospheres

Additionally, we need to convert the volume from mL to L. 1 L = 1000 mL, V=732mL/1000mL/L

V = 0.732L

Now that we have all the values ​​we need, we can plug them into the ideal gas law equation to calculate the number of moles.

n = 0.2758 atm * 0.732 L / (0.0821 L-atm/mol-K * (21 + 273.15 K))

n = 0.0108 mol. The mass of the gas is given as 0.37 g, so the molar mass can be calculated as

molar mass = mass / mol

= 0.37 grams/0.0108 moles

= 34.26 g/mole

To learn more about molar mass:

https://brainly.com/question/30667799

#SPJ4

When a boxer is moving away from a punch, the force experienced is reduced because C) increased.

The force created when things collide is known as the force of impact. The impact or hitting power of your vehicle increases as you increase your speed. The force of impact rises with the square of the increase in speed, according to the rules of physics.

When you throw a punch, you'll apply force to the target by using the momentum that was built during the action and the addition of the snap. This results in impulse (force x time). You may transfer a lot of impulse to the target area and build momentum if you do so.

Therefore, option C is correct.

Learn more about force at:

https://brainly.com/question/12970081

#SPJ1

missing options

A) no different, but the timing is different

B) decreased

C) increased

D) all of the above

Allison's speed at the lowest point in the trajectory is 6.41 m/s.

A mass-moving object's route through space as a function of time is known as its trajectory or flight path.

The potential energy at the highest point is given by:

PE = mgh = (14 kg)(9.8 [tex]m/s^2[/tex])(1.8 m)(cos 26°) = 237.5 J

Where h is the height above the lowest point.

At the lowest point, all of the potential energy is converted to kinetic energy, so:

KE = PE = 237.5 J

The kinetic energy is given by:

KE = (1/2)[tex]mv^2[/tex]

where v is the speed at the lowest point. Solving for v, we get:

v = sqrt(2KE/m) = sqrt(2(237.5 J)/(14 kg)) = 6.41 m/s

Thus, 6.41 m/s. Allison's speed at the lowest point in the trajectory.

For more details regarding trajectory, visit:

https://brainly.com/question/28874076

#SPJ9

There is no specific rule regarding the number of transistors that can be used in a circuit.

The number of transistors used in a circuit depends on the complexity of the task to be performed, the power requirements of the circuit, and the size and cost constraints. Moore's Law states that a chip's transistor count roughly doubles every two years. In order to improve integrated circuit functionality and performance while lowering costs, the scale goes smaller and the transistor count rises steadily. Moore's Law refers to the fact that the number of transistors on an integrated circuit doubles roughly every two years. According to Moore's Law, a microchip's transistor count doubles every two years. We may expect an increase in the speed and capability of our computers every two years and still pay less for them, according to the law.

To learn more about transistors click here https://brainly.com/question/23822494

#SPJ4

The statement "If a researcher measures two individuals on an ordinal scale, it is possible to determine which individual has the larger score" is false.

An ordinal scale is a type of measurement scale that allows for the ranking of individuals or objects based on a specific characteristic or trait. For example, if a researcher is measuring the level of pain experienced by two individuals, they may use an ordinal scale with categories such as "no pain," "mild pain," "moderate pain," and "severe pain." The individual who falls into the "severe pain" category would have a larger score than the individual in the "mild pain" category. Therefore, it is possible to determine which individual has the larger score when using an ordinal scale.

Learn more about ordinal scales at https://brainly.com/question/15998581

#SPJ11

The charge that must transfer for object A to gone positively charged is the negative charge in object A.

The physical characteristic of matter that causes it to feel a force when exposed to an electromagnetic field is called electric charge.

The two types of electric charges that protons and electrons most frequently carry are positive and negative charges. Charge movement is what produces energy.

An object can either be negatively charged or positively charged. An object is positively charged when it includes more protons than electron.

Thus, for object A to be positively charged, the charge that must shift for object A to become positively charged is the negative charge.

Learn more about charge here:

brainly.com/question/14701820

#SPJ9

Your question is incomplete, most probably your question was as below, and missing part is attach in image below.

Select the correct location on the image.

Objects A and B are brought close to each other. Object A will soon become positively charged. Identify the charge that must transfer for this situation to occur.

+

A

B

Answer: Approximately 6.67 meters per second.

Explanation:

Speed is a quantity measured in meters per second, so because the elapsed time is 5 minutes, let's turn it into seconds. 5 minutes multiplied by 60 seconds is 300 seconds.

2000 meters divided by 300 seconds is about 6.67 meters per second, which is the speed.

Assuming that the drag force is proportional to the velocity, the dragster will travel approximately 392 meters during the 4-second interval.

To find the value of the drag coefficient k, we can use the following formula:

F = kv

where F is the drag force, k is the drag coefficient, and v is the velocity of the dragster.

At the initial velocity of 220 mph, the drag force is given by:

F₁ = kv₁

where v₁ is the initial velocity of 220 mph. Similarly, at the final velocity of 50 mph, the drag force is given by:

F₂ = kv₂

where v₂ is the final velocity of 50 mph.

During the 4-second interval, the average velocity of the dragster is:

vavg = (v₁ + v₂)/2 = (220 mph + 50 mph)/2 = 135 mph

Converting to SI units:

vavg = 60.54 m/s

The change in velocity during the 4-second interval is:

Δv = v₂ - v₁ = 50 mph - 220 mph = -170 mph

Converting to SI units:

Δv = -76.02 m/s

The acceleration of the dragster during the 4-second interval is:

a = Δv/t = (-76.02 m/s)/4 s = -19.01 m/s²

The drag force acting on the dragster is:

F = ma

where m is the mass of the dragster, which is given as 3000 lb, or 1360.78 kg (converting to SI units). Substituting the given values, we get:

F = (1360.78 kg)(-19.01 m/s²) = -25,874.8 N

At the initial velocity of 220 mph, the drag force is:

F₁ = kv₁ = k(220 mph) = 97.97 kN

Similarly, at the final velocity of 50 mph, the drag force is:

F₂ = kv₂ = k(50 mph) = 22.37 kN

Using the given information, we can set up the following system of equations:

F₁ - F₂ = -25,874.8 N

(97.97 kN) - (22.37 kN) = -25,874.8 N

Solving for k, we get:

k = (-25,874.8 N)/(170 mph) = (-25,874.8 N)/(76.02 m/s) ≈ -340.83 Ns²/m

Therefore, the drag coefficient k that is needed to reduce the speed of the dragster from 220 mph to 50 mph in 4 seconds is approximately -340.83 Ns²/m.

To find how far the dragster will travel in the 4-second interval, we can use the formula for distance traveled under constant acceleration:

d = vi × t + (1/2)at²

where vi is the initial velocity, t is the time interval, a is the acceleration, and d is the distance traveled.

Substituting the given values, we get:

d = (220 mph)(4 s) + (1/2)(-19.01 m/s²)(4 s)²

Converting the initial velocity to SI units:

d = (98.10 m/s)(4 s) + (1/2)(-19.01 m/s²)(16 s²) ≈ 392 m

Learn more about force here: brainly.com/question/12970081

#SPJ4

When a 5.0 kg block moves at 5.0 m/s over a horizontal frictionless surface towards an ideal spring attached to a wall, the maximum speed of the block is 4.33 m/s when the spring is squeezed to one-half of the maximum distance.

According to the law of conservation of energy, the kinetic energy of the mass equals the work done on the spring.

i.e.

1/2 mv² = 1/2 kx²max

In light of this:

The weight of the block is 5.0 kg.

the speed at which it is travelling = 5.0 m/s spring

compression = 0.68 m

By multiplying both sides of the equation by 2, we get:

mv² = kx²max

Making (k) the formula's subject;

k = mv²/ x²max

k = 5*5²/0.68²

k = 125/0.4624

k = 268.17 N/m

However, when the distance is reduced to one-half of its maximum, the speed is calculated as follows:

x = 0.68/2 = 0.34 m

∴

1/2 mv² - 1/2 mv² = 1/2 kx²

m(v²₀-v²) = kx²

(v²₀ - v²) = kx²/m

(5² - v²) = 268.17 * 0.34²/5.0

25-v² = 6.2

v² = 25.625

v² = 18.75

v = √18.75

v = 4.33 m/s

As a result, we may deduce that the block's speed when the spring is squeezed to only one-half of its maximum distance is 4.33 m/s.

Learn more about kinetic energy from here;

https://brainly.com/question/26472013

#SPJ4

Answer:

In scientific notation, the density would be 5 x 10^-2 kg/m³ or 5 x 10^-2 g/cm³.

Explanation:

To find D, we just need to divide M by V.

M = 2.5 kg

V = 50 m³

D = M/V = 2.5 kg / 50 m³ = 0.05 kg/m³

The unit of density (D) is kg/m³, which can also be expressed as g/cm³.

In scientific notation, the density would be 5 x 10^-2 kg/m³ or 5 x 10^-2 g/cm³.

It lengthens the impact window while lessening the force of impact. The moment of impact is shortened and the energy of impact is increased when the boxer moves toward the blow. Thus, option B is correct.

The force felt by a boxer as they move away from a blow is lessened since the punch has more time to make contact with them. Impulse is the result of the force and the moment of application, and this notion explains why “rolling with the punches” in boxing is effective.

Since force is inversely proportional to time, the effect of force is diminished when he moves his head rearward since time increases. Hence, the force lessens and the boxer impacts somewhat. Q.

Therefore, When a boxer moves into an oncoming punch, the force experienced is increased

Learn more about force here:

https://brainly.com/question/13191643

#SPJ4

Standing waves are most often caused by the resonance phenomenon, which happens when waves are reflected back and forth at the resonator's resonant frequency and interfere, causing standing waves to form inside the resonator.

The observed wave pattern contains points that appear to be standing still, which is why the pattern is typically referred to as a standing wave pattern.

Such patterns can only be produced by specific vibrational frequencies within the medium. The term "harmonics" or "only harmonics" is used to describe these frequencies.

A reflective boundary of some kind is required for a standing wave to form. The shape is then affected by the wave's frequency, the waveguide's length, and the boundary's acoustic impedance.

Therefore, standing wave pattern change.

Learn more about standing wave here:

https://brainly.com/question/28191139

#SPJ4

Voltage measures the electric potential difference between two points in an electric circuit. It is often referred to as electric potential and is measured in volts (V).

The voltage of a battery is an indication of the amount of electrical energy that the battery can provide to a circuit. The output voltage of a battery can be calculated using the formula: V = E/Q; where V is the output voltage, E is the energy expended, and Q is the amount of charge moved. Plugging in the values given in the question, we get:

V = 3 J / 0.4 C

V = 7.5 V

Therefore, the battery's output voltage is 7.5 volts when 3 joules of energy are expended in moving 0.4 coulombs of charge. Rounded to one decimal place, the answer is 7.5 volts.

To learn more about Voltage, visit here

https://brainly.com/question/29445057

#SPJ4

The conversion factor between square centimeters ([tex]cm^2[/tex]) and square meters ([tex]m^2[/tex]) is [tex]0.0001 m^2/cm^2.[/tex]

to convert a given area from square centimeters to square meters, you need to multiply it by 0.0001, and to convert it from square meters to square centimeters, you need to multiply it by 10,000.

This conversion factor is derived from the fact that there are 100 centimeters in a meter, and the conversion from one unit to another involves squaring the length measurement. This means that the conversion factor between the area in square centimeters and square meters is [tex](1 cm / 100 cm)^2[/tex] = [tex]0.0001 m^2/cm^2[/tex].

It's important to be able to convert between different units of area, as different applications may require different units. For example, when measuring the area of a small object, square centimeters may be a more appropriate unit, while for larger areas, square meters may be more suitable.

Learn more about conversion factor here:

https://brainly.com/question/23718955

#SPJ4

The human activities that are contributing to increase carbon dioxide are said to be releasing chemicals into the atmosphere, deforestation, construction, burning fossil fuels, etc.

Burning the fossil fuels is done to produce coal, generation of electricity, in factory usage which results in the release of huge amounts of CO₂.

Smoke from the vehicles contribute to the increased CO₂ levels.

Deforestation is done to acquire land for agriculture and construction purposes. Urbanisation leads to increase in CO₂ levels with the increased construction.

Construction of high rise buildings leads to the usage of a lot of cement. Thus increasing CO₂ levels into the atmosphere.

Increased CO₂ levels in the atmosphere leads to the climate change by increasing the temperature of the earth.

To know more about human activities:

https://brainly.com/question/30665396

#SPJ4

A radio photon is a quantum of electromagnetic radiation in the radio frequency range of the electromagnetic spectrum. Electromagnetic radiation is a type of energy that travels through space as waves, and is characterized by its frequency, wavelength, and energy.

The energy of a radio photon from a particular radio station depends on the frequency of the radio wave, which is typically measured in Hertz (Hz). The energy of a photon is given by Planck's equation:

E = h*f

where E is the energy of the photon, h is Planck's constant (6.626 x 10^-34 joule-seconds), and f is the frequency of the wave.

For a typical radio station, the frequency of the radio wave is in the range of several hundred kilohertz to several megahertz. Let's take the example of a radio station that broadcasts at a frequency of 1000 kilohertz (1 megahertz).

Using the equation above, we can calculate the energy of a single photon of this radio wave as follows:

E = 6.626 x 10^-34 J*s * 1 x 10^6 Hz

E = 6.626 x 10^-28 joules

So, the energy of a radio photon from a 1-megahertz radio station is about 6.626 x 10^-28 joules.

To know more about radio photon visit:

https://brainly.com/question/14291666

#SPJ4

The frequency of System 1 is highest, followed by System 2, and finally System 3.

The equation: gives the frequency of an oscillating system.

f = (1 / 2π) * √(k / m)

When the mass is m, the spring constant is k, and the frequency is f.

Each mass is dragged down an additional 1 cm before being released, so the oscillation amplitude is the same for all of the masses.

The square root of the spring constant is directly proportional to an oscillating system's frequency, while the square root of the mass is inversely proportional.

As a result, the system with the greatest frequency also has the largest spring constant and lowest mass.

We shall compare the masses since, based on the available data, we are unable to tell which system has the largest spring constant.

m1 Equals 0.5 kg in System 1.

System 2: 0.8 kg/m2

System 3: 1.2 kg/m3

We can determine the frequencies of each system using the frequency formula:

f1 = (1 / 2)*(k / m1), f2*(k / m2)*(k / m3), and f3*(1 / 2)*(k / m3)

We can compare the frequencies by looking at the mass terms because the spring constant is the same for all three systems:

F1 = 1/M1 = 1/0.5 = 1.414 F2 = 1/M2 = 1/M8 = 1.118 F3 = 1/M3 = 1/M2 = 1/M3 = 0.912

System 1 therefore operates at the greatest frequency, followed by systems 2 and 3.

For Such more questions on Frequency

https://brainly.com/question/254161

#SPJ4

The car has 50,000,000 J of kinetic energy when it's halfway to the ground.

The energy that an object has as a result of motion is known as kinetic energy. Kinetic energy, which may be transferred to other objects or changed into other kinds of energy, is present in every moving item.

According to question:

At the top of the cliff, the total energy of the car is purely potential energy, which is given by:

PE = mgh

where m is the mass of the car, g is the acceleration due to gravity (approximately 9.81 m/s²), and h is the height of the cliff relative to the ground.

In this case, the potential energy of the car is given as 100 MJ. However, we need to convert this to joules in order to use it in the kinetic energy calculation later.

1 MJ = 1,000,000 J, so

PE = 100 MJ = 100,000,000 J

Now, when the car falls halfway to the ground, it has lost half of its potential energy, which means it now has:

PE = 0.5 * 100,000,000 J = 50,000,000 J

At this point, the car has also gained some kinetic energy due to its motion. The total energy (potential + kinetic) must still be conserved, so we can use the law of conservation of energy to find the kinetic energy of the car when it's halfway to the ground:

PE(initial) = KE(final)

where KE is the kinetic energy of the car at the final point (when it's halfway to the ground).

So, substituting the values we have:

50,000,000 J = KE

We now know that the car has 50,000,000 J of kinetic energy when it's halfway to the ground.

To know more about kinetic energy visit:

https://brainly.com/question/26472013

#SPJ4

You're flying a Cessna 182 Skylane, N935FA, on a cross-country VFR flight with flight following. During a handoff, the ideal call sign to use when contacting the new controller is Skylane 935FA.

Flight following is a relatively simple concept as it’s an aircraft flying under VFR that is taking use of Air Traffic Control (ATC) services. Practically, it indicates that several advisories may be available from the controller and the flight is radar identified by ATC.

The service is given on a workload-permitting basis and involves multiple layers of service, there’s not entirely uniform delivery among Center or Approach control facilities. The fusion of these realities has resulted in misinformation, misunderstandings, and even no awareness of its existence.

To learn more about VFR flight,

brainly.com/question/14308163

#SPJ4

Needle will be pushed away form the magnet if the compass was kept at the same distance, but moved to the other end of the magnet

When the magnetic field of the bar magnet intercepts the magnetic field of the compass needle, the compass needle deflects because it encounters a distinct magnetic field.

Needle of the magnetic compass is deflected when a bar magnet is brought up to a magnetic compass. As the north pole of the magnet is brought close to the compass, the needle's south side is drawn to it. Needle will be pushed away form the magnet if the compass was kept at the same distance, but moved to the other end of the magnet.

To know more about the magnetic compass, here

brainly.com/question/22964998

#SPJ4

The suitcase is dragged approximately 0.58 meters before it is riding smoothly on the conveyor belt.

Drag force is a force that resists the motion of an object through a fluid (such as air or water) due to the frictional forces between the object's surface and the fluid.

Here,

The initial velocity of the suitcase is zero since it was dropped from rest. The suitcase will accelerate until the kinetic friction force between it and the conveyor belt matches the force of gravity acting on it, resulting in a constant velocity. We can use the following equation to find the distance traveled by the suitcase until it reaches a constant velocity:

[tex]d = (v_f^2 - v_i^2) / (2 * \mu* g)[/tex]

We know the final velocity of the suitcase is 1.5 m/s, the coefficient of kinetic friction is 0.20, and g is 9.81 m/s^2. Substituting these values into the equation, we get:

[tex]d = (1.5^2 - 0) / (2 * 0.20 * 9.81)[/tex]
d ≈ 0.58 meters

Therefore, the suitcase is dragged approximately 0.58 meters before it is riding smoothly on the conveyor belt.

Learn more about drag force here:

https://brainly.com/question/12774964
#SPJ1

The total energy of the ball at the top of its flight path is 224.2 Joules.

To determine the total energy of the ball at the top of its flight path, we need to consider the ball's kinetic energy and potential energy.

First, let's find the maximum height the ball will reach. At the top of its flight path, the ball will have no vertical velocity, so we can use the equation:

[tex]v_f^2 = v_i^2 + 2ad[/tex]

where[tex]v_f[/tex]is the final velocity (0 m/s), [tex]v_i[/tex] is the initial velocity (32 m/s), a is the acceleration due to gravity [tex](-9.8 m/s^2)[/tex], and d is the maximum height. Solving for d, we get:

[tex]d = (v_f^2 - v_i^2)/(2a) = (0 - (32 m/s)^2)/(2*(-9.8 m/s^2)) = 51.8 m[/tex]

Next, let's find the kinetic energy of the ball at the top of its flight path. Since the ball has no vertical velocity at this point, we can use the horizontal velocity to find the kinetic energy. The horizontal velocity is:

[tex]v_x = v_i cos(30o) = 27.7 m/s[/tex]

The kinetic energy is:

[tex]K = (1/2)mv_x^2 = (1/2)(0.25 kg)(27.7 m/s)^2 = 96.4 J[/tex]

Finally, let's find the potential energy of the ball at the top of its flight path. The potential energy is:

U = mgh = [tex](0.25 kg)(9.8 m/s^2)(51.8 m)[/tex] = 127.8 J

The total energy at the top of the ball's flight path is the sum of the kinetic and potential energy:

E = K + U = 96.4 J + 127.8 J = 224.2 J

Therefore, the total energy of the ball at the top of its flight path is 224.2 Joules.

Learn more about energy, here:

https://brainly.com/question/1932868

#SPJ1

Different substances also have different specific heat capacities, which is the amount of energy needed to increase the temperature of an object by a certain amount.

Specific heat is defined as the amount of heat energy required to raise the temperature of one unit of mass of a substance by one degree Celsius (or one Kelvin). It is a physical property that depends on the chemical composition and molecular structure of the substance. Substances with a high specific heat capacity require more heat energy to increase their temperature than substances with a low specific heat capacity. For example, water has a very high specific heat capacity, which means that it takes a large amount of heat energy to raise its temperature by even a small amount. This is why water is often used as a coolant in industrial processes, as it can absorb a large amount of heat without increasing in temperature significantly. On the other hand, metals have low specific heat capacities, which means that they require relatively less heat energy to increase their temperature. This is why metals are often used in cooking utensils, as they can be quickly heated up and used to cook food. Specific heat is an important property in various fields of science and engineering, as it affects the way heat is transferred between different substances, such as in thermal insulation, heating and cooling systems, and chemical reactions.

In summary, specific heat capacity is a property of a substance that determines the amount of heat energy needed to increase the temperature of the substance by a certain amount. Different substances have different specific heat capacities due to differences in their chemical composition and molecular structure.

To know more about energy please refer: https://brainly.com/question/26472013

#SPJ4

The fundamental frequency of the resonating air column in the bottle is 212.5 Hz. When a tube or bottle with one closed end is excited, it can resonate at certain frequencies, with the lowest frequency being the fundamental frequency.

The fundamental frequency of a resonating air column in a tube with one closed end, like the bottle in this case, is given by:

f = v/4L

where f is the fundamental frequency, v is the speed of sound, and L is the length of the air column.

In this case, the length of the air column is equal to the height of the bottle, which is 0.4 meters. The speed of sound is 340 m/s. Substituting these values into the formula, we get:

f = (340 m/s)/(4 x 0.4 m) = 212.5 Hz

Therefore, the fundamental frequency of the resonating air column in the bottle is 212.5 Hz.

When a tube or bottle with one closed end is excited, it can resonate at certain frequencies, with the lowest frequency being the fundamental frequency. The length of the air column inside the tube determines the fundamental frequency of the resonating air column. The resonant frequencies of the tube are determined by the speed of sound in air, the length of the air column, and the properties of the tube, such as its shape and the position of the closed end.

The fundamental frequency of a resonating air column in a tube with one closed end can be determined using the formula:

f = v/4L

where f is the frequency, v is the speed of sound, and L is the length of the air column. This formula assumes that the air column is a simple tube with one closed end, and that the air inside the tube is at rest before the sound wave is introduced.

Learn more about frequency here:

https://brainly.com/question/9424813

#SPJ4

The distance from the wire at which the magnetic field has a magnitude of 1.2 mt is 26.7 mm.

A region of space where the magnetic forces of a magnet or a moving electric charge can be felt is called a magnetic field. Moving electric charges, such the spinning electrons in an atom or the electrons in a wire, create magnetic fields. They can also be created by the Earth's core or permanent magnets.

The strength and direction of magnetic fields define them. A magnetic field's direction can be determined by calculating the force it would apply to a compass's north pole. The amount of force that a magnetic field would apply to a charged particle travelling through the field provides an indication of its intensity.

According to question:

To calculate the distance at which the magnetic field has a magnitude of 1.2 mt from a long, straight wire carrying a current of 16 A, we can use the formula for the magnetic field of a current-carrying wire:

B = (μ0 / 2π) * (I / r)

where B is the magnetic field, I is the current, r is the distance from the wire, and μ0 is the permeability of free space (4π x 10^-7 T·m/A).

Rearranging the formula to solve for r, we get:

r = (μ0 / 2π) * (I / B)

Plugging in the given values, we get:

r = (4π x 10^-7 T·m/A / 2π) * (16 A / 1.2 x 10^-3 T)

r = 2.67 x 10^-5 m = 26.7 mm

To know more about magnetic field visit:

brainly.com/question/14848188

#SPJ4

The amount of energy converted into heat when the cart is at the base level of the track is approximately 7490 J.

The energy an object has as a result of motion is known as kinetic energy. A force must be applied to an object in order to accelerate it.

Kinetic energy:

E = mgh

E = (958 kg) x (9.81 m/[tex]s^2[/tex]) x (55 m) = 5.26 x [tex]10^5[/tex] J

E = KE + Q

KE is the kinetic energy of the cart and Q is the energy converted into heat. Substituting the given value for the kinetic energy, we get:

5.26 x [tex]10^5[/tex] J = 511,000 J + Q

Solving for Q, we get:

Q = 5.26 x [tex]10^5[/tex] J - 511,000 J = 7490 J

Thus, 7490 J energy is converted into heat.

For more details regarding kinetic energy, visit:

https://brainly.com/question/26472013

#SPJ9

The force that your bottom is pushing against the chair is called the "action force."

The action force is equal and opposite to the "reaction force" that the chair is pushing back against your bottom. This is known as Newton's Third Law of Motion, which states that for every action, there is an equal and opposite reaction.

So, when you are sitting in a chair, your bottom is pushing against the chair with a certain amount of force, and the chair is pushing back against your bottom with the same amount of force. This is why you are able to sit in the chair without falling through it.

here you can find an example of Newton's third law

https://brainly.com/question/7828983

#SPJ11

Ratio of the final to the initial linear charge density is cubed, and for electric force before and after shrinking ratio is equal to that of charge density.

When a segment of wire is shrunk to one-third of its original length, the ratio of the final to the initial linear charge density ( ) is cubed. In other words.

The electric force on a proton located far from the wire is proportional to the linear charge density of the wire. So, if the linear charge density decreases (as it does when the wire is shrunk), the electric force on the proton also decreases. The ratio of the electric force on the proton after the segment is shrunk to the force before the segment was shrunk is equal to the ratio of the linear charge densities: .

If the original segment of wire is stretched to 10 times its original length, then the linear charge density will decrease to one-tenth of its original value. To keep the linear charge density unchanged, an amount of charge equal to ten times the original charge must be added to the wire. This is because the linear charge density is proportional to the total charge on the wire and inversely proportional to the length of the wire.

In conclusion, when a segment of wire is shrunk or stretched, the linear charge density changes, which in turn affects the electric force on a proton located far from the wire. To keep the linear charge density unchanged, the total charge on the wire must be adjusted accordingly.

Learn more about ratio here:

https://brainly.com/question/16038544

#SPJ4

Answer:

60mV

Explanation:

But I'm not so sure, i tried