What quality doe all functional GIS data have?

False. Mercury was never added to gasoline as a fuel additive to improve engine performance.

The claim that early 20th-century chemists added dissolved mercury to gasoline to improve engine performance is false. While chemists did experiment with various additives to improve the properties of gasoline, including lead-based compounds and oxygenates such as ethanol and methanol, there is no record of mercury being used for this purpose.

In fact, mercury is a highly toxic metal that can cause serious health problems, including neurological damage, when ingested or inhaled. As a result, the use of mercury in any form as an additive has been banned in many countries, including the United States.

Furthermore, it is important to note that the use of gasoline additives, in general, has come under scrutiny due to their potential adverse effects on human health and the environment. While some additives, such as detergents and antioxidants, are still commonly used, others like lead and MTBE have been phased out or banned altogether. The use of alternative fuels and electric vehicles is also being explored as a way to reduce the environmental impact of transportation.

To learn more about gasoline, click here:

https://brainly.com/question/29991915

#SPJ4

Precambrian time covers most of Earth's history,beginning with the planet's creation about 4.5 billion years ago and ending with the emergence of complex,multicellular life forms nearly four billion years later.

During the Paleozoic Era, which lasted 289 million years, plants and reptiles began to move from the sea to the land. With a duration of 79 million years,it represents more time than has elapsed since the extinction of the dinosaurs,which occurred at the end of the period. Geological time began to run when the Earth formed 4.6 billion years ago.The Precambrian spans the Archean and Proterozoic eons,which are formal geologic intervals that lasted from 4 billion to about 541 million years ago,and the Hadean Eon,which is an informal interval that extends from 4.6 billion to 4 billion years ago.Stratigraphy,also called chronostratigraphy,is the arrangement and analysis of the Earth's layers,also called chronological dating techniques based on strata and the positions of the layers relative to each other.

To learn more about multicellular please click on below link.

https://brainly.com/question/13049050.

#SPJ4

Answer:

80 is the awnser

Explanation:

True Groundwater is a better source of water because it is unaffected by pumping and does not affect wetlands or streams.

As long as the sources are unpolluted and the water is sufficiently treated, both surface water and groundwater can generally provide safe drinking water. There are numerous advantages to using groundwater over surface water.

Water is discharged into rivers and streams either directly through river beds and banks or indirectly through springs as groundwater tables rise in the winter and spring. Many of California's rivers and streams continue to flow long after the rain has stopped.

By either intercepting groundwater flow that discharges into the surface-water body under natural conditions or by increasing the rate of water movement from the surface-water body into an aquifer, groundwater pumping can alter how water moves between an aquifer and a stream, lake, or wetland.

To learn more about Groundwater here:

https://brainly.com/question/14241380

#SPJ4

Galileo Galilei's astronomical observations challenged the geocentric model and led to his condemnation by the Catholic Church .Galileo Galilei's astronomical observations challenged the geocentric model and led to his condemnation by the Catholic Church.

Galileo Galilei with his  astronomical observations challenged the geocentric model and led to his condemnation by the Catholic Church.

Gailileo Galilei was a renowned astronomer and physicist who made significant contributions to the fields of astronomy, physics, and mathematics. He is known for his observations of the night sky, which challenged the then-accepted geocentric model of the universe. Galileo observed sunspots and craters on the moon, and he discovered the four largest moons of Jupiter, which suggested that Earth orbits the sun.

Galileo Galilei, ideas and findings were controversial and ultimately led to his condemnation by the Catholic Church. His trial was more about his perceived disrespect of authority than his teachings of astronomy. Although Galileo was not executed, he was placed under house arrest for the rest of his life.

In recent years, the Catholic Church has reexamined Galileo's case and acknowledged that his ideas were not heretical, but rather, they were based on sound scientific evidence. Galileo Galilei and his legacy continues to influence the scientific community, and his contributions to the fields of astronomy, physics, and mathematics are widely recognized today.

to know more about Galileo Galilei click on https://brainly.com/question/4120451

#SPJ4

A topographic map is a detailed and accurate representation of man-made and natural features on the Earth's surface.

There are various types of maps for various purposes. Topographic maps identify different ground features like Relief(mountain, slope), Hydrography(lakes, river), Vegetation, Boundaries, Transportation ways etc. The topographic map is a two-dimensional representation of the Earth's three-dimensional landscape. Therefore, a map will never be entirely up to date. Changes may take place in  landscape features regularly resulting in maps becoming dated, although the rate of agedness varies depending upon location.

Topographic maps are based on topographical surveys. They are used in geographic planning, mining and other earth based endeavors. Hikers use topographic maps to find trails and the steepness of slopes to plan their ascent.

To read more about the Uses of Maps:

https://brainly.com/question/12942045

Theory of an oscillating world. According to this hypothesis, there is a big crunch for every big bang. Theory of an oscillating world.

What are some examples of oscillate?

The movement of a simple pendulum in a clock and the tides in the sea are the two most typical instances of oscillation. The oscillation of springs is another illustration. Oscillations can also be seen in the vibration of guitar strings and other stringed instruments. Synonyms for oscillate include fluctuate, sway, swing, undulate, vibrate, and waver. While all of these phrases refer to "moving from one way to its opposite," oscillation emphasises a typically predictable change in direction. a rotating fan.

Know more about pendulum Visit:

https://brainly.com/question/29702798

#SPJ1

1. The purpose of photogrammetry is to measure and create accurate 3D models and maps using photographs.

2. UAV stereo images are taken with a very high degree of overlap to provide a sufficient number of tie points for accurate 3D modeling.

3. Four differences between vertical and oblique photos are:

4. Fiducial marks on an aerial photo serve as reference points for photogrammetric measurements, providing a means of scaling and orienting the photograph.

5. Stereoscopic parallax is caused by the displacement of an object's position between two images taken from different angles.

6. Absolute stereoscopic parallax refers to the displacement of an object relative to the ground, while differential parallax refers to the displacement of an object relative to other objects in the scene.

7. a. h = height of object, H’ = height of object in the photo, dP = parallax, P = principal distance

b. h = height of object, H’ = height of object in the photo, d = distance between photos, r = parallax

c. H’ = height of object in the photo, h = height of object, r = parallax, d = distance between photos

8. Stereoscopic vision in remote sensing is important because it allows for the creation of accurate 3D models and measurements of the Earth's surface.

9. Two ways to view stereo images are through the use of a stereoscope or by using anaglyph images.

10. The equation δr = h*f / B relates the shift in apparent position of an object in two images to the object's height above the ground, the focal length of the camera, and the distance between the two images.

11. The purpose of orthorectification is to remove distortions caused by terrain relief and camera tilt in aerial imagery, resulting in a more accurate and consistent representation of the Earth's surface.

12. The acceptable difference between initial and computed camera positions depends on the accuracy requirements of the project, but in general, a difference of less than one pixel is considered acceptable. The difference can be minimized by using high-quality ground control points and accurate camera calibration.

13. The data in the pix4d quality report that indicates significant overlaps between images is the "Image Properties" section, which shows the number and percentage of overlapping images.

14. The data in the pix4d quality report that indicates significant matches between tie points is the "Tie Points" section, which shows the number and distribution of tie points across the project area.

15. The section of the pix4d quality report that indicates the positional deviations associated with data is the "Quality Check" section, which shows the accuracy of the camera positions and the level of geometric distortion in the data.

16. During Stage one processing of UAV images, the images are calibrated, matched, and a sparse point cloud is generated.

17. The purpose of Stage two processing of UAV images in Pix4D is to generate a dense point cloud, 3D mesh, and orthomosaic using the sparse point cloud and images.

18. Five different products that can be generated from Pix4D are:

19. Two ways by which the accuracy of the 3D models generated by Pix4D can be improved are:

Increasing the Ground Control Point (GCP) density: GCPs are surveyed points with known coordinates used to improve the accuracy of the 3D model. Increasing the GCP density can improve the accuracy of the 3D model.

Using high-precision Global Navigation Satellite System (GNSS) receivers and inertial measurement units (IMUs) to georeference the images: High-precision GNSS receivers and IMUs can provide more accurate information about the camera's position and orientation, which can lead to a more accurate 3D model.

learn more about Stereoscopic parallax: https://brainly.com/question/29823949

#SPJ1

Catherine the great Russian leader secured Russian frontage on the Black Sea, in what is today Ukraine.

What era in Russian history did Catherine the great rule?

The longest reign of a Russian empress was that of Catherine II, sometimes referred to as Catherine the Great, who ruled from 1762 to 1796. She greatly grew her country's dominion while being known more for her personal than her official concerns. After her husband, Peter III, was overthrown, she ascended to power. The Enlightenment-inspired cultural and scientific revival that Russia underwent throughout her lengthy rule resulted in the founding of numerous new cities, universities, and theatres, as well as widespread immigration from the rest of Europe and the acknowledgment of Russia as one of Europe's great powers.

Know more about Catherine the great - brainly.com/question/25602343

#SPJ1

Answer:

She spent $180 and saved $120.

15 x 20 = 300

300/5 = 60

60 x 3 = 180

60 x 2 = 120

The amount lower than the bid made by Company A, that was made by Company B is $ 56, 000

To find the amount made, you first need to find the amount that Company A made as a bid which is :

= Materials + Labor

= 596, 000 + 169, 000

= $ 765, 000

The amount made by Company B as a bid was :

= 539, 000 + 170, 000

= $ 709, 000

The difference is therefore :

= 765, 000 - 709, 000

= $ 56, 000

Find out more on bids at https://brainly.com/question/28106407

#SPJ1

In the Northern Hemisphere, surface air moves clockwise in a high-pressure system and counterclockwise in a low-pressure system. Surface air motion is out of a high-pressure system  and into a low-pressure system.

The movement of air in the atmosphere is affected by differences in air pressure. High-pressure systems are areas where the air pressure is higher than the surrounding areas, while low-pressure systems are areas where the air pressure is lower than the surrounding areas.

In the Northern Hemisphere, the Coriolis effect causes the surface air to move clockwise around a high-pressure system and counterclockwise around a low-pressure system. This means that in a high-pressure system, the surface air is moving outwards away from the center of the system, while in a low-pressure system, the surface air is moving inwards towards the center of the system.

As the air moves from high-pressure to low-pressure areas, it creates winds. The stronger the pressure gradient (difference in pressure between two points), the stronger the winds will be. Understanding the direction of surface air movement is important for predicting weather patterns, as different air masses with different pressures can create various weather conditions, such as thunderstorms, hurricanes, or clear skies.

To learn more about high-pressure system, click here:

https://brainly.com/question/14781863

#SPJ4

sedimentary rock can originate the particles from the rock by air water and heat .metamorphic rock can originate the result from one particle to another particle .

Answer:

Explanation:

The concept of a black body is a theoretical idealization used in physics and engineering to describe the behavior of an object that perfectly absorbs all electromagnetic radiation that falls on it and re-emits it in a perfectly isotropic manner. A black body is considered to be a perfect radiator and absorber of electromagnetic radiation because it follows all of the radiation laws perfectly.

One of the key properties of a black body is that it emits electromagnetic radiation at a maximum possible rate for a given temperature. This rate of emission can be described using Planck's law, which gives the spectral radiance of a black body as a function of temperature and wavelength.

Another important property of a black body is that it emits a continuous spectrum of electromagnetic radiation. The intensity and distribution of this radiation is described by the Stefan-Boltzmann law, which states that the total power emitted by a black body is proportional to the fourth power of its temperature.

In practice, a true black body does not exist. However, objects that approximate the behavior of a black body, such as a cavity with a small opening, can be used to study the behavior of electromagnetic radiation. These objects are called "quasi-black bodies" or "gray bodies".

The study of black bodies has been important in a wide range of fields, including thermodynamics, where it has been used to study the behavior of heat and light, and astronomy, where it has been used to model the emission from stars and other celestial objects. The concept of a black body has also been important in the development of modern physics, including the study of quantum mechanics and the behavior of electromagnetic radiation.

Overall, the concept of a black body is a useful idealization that provides a framework for understanding the behavior of electromagnetic radiation and its interactions with matter. Despite its theoretical nature, the principles and laws associated with black bodies have been widely applied in various fields and have contributed to our understanding of the natural world.

INFORMATION GENERAL; 

Content GENERAL; 

Teaching methods, 

Teaching methods, 

ASSUMED PRIOR KNOWLEDGE

The diversity of natural and cultural landscape aspects will be emphasised as students obtain factual information about the world and its areas. They will also be familiar with some fundamental principles, definitions, and topics in the

Students will have a greater sense of global awareness and geographic literacy. They will succeed in achieving one of the objectives of a liberal arts education, which is to create informed citizens capable of understanding the unique contribution that geography makes to the political, economic, and social life of other nations. They will be able to apply spatial analysis to assist explain some of the major regional problems of the present, especially geopolitical, economic, social .

LEARN MORE ABOUT lesson plan

https://brainly.com/question/28509680

#SPJ1

Answer:

because it showas how the things work

The claim about rocks on Venus  you think is the best supported by the evidence is: Claim 2.

Claim 2: Venus's rock transformation processes form mostly igneous rock is best supported by the evidence.

The surface of Venus is covered in volcanic features, such as lava plains, shield volcanoes, and large volcanic mountains. This indicates that volcanic activity is a dominant geological process on Venus. Igneous rocks are formed from the cooling and solidification of magma or lava, and are the most common type of rock formed through volcanic processes.

On the other hand, sedimentary rocks are typically formed through the accumulation and cementation of sediment, which requires the presence of water or ice. There is currently no evidence to suggest that Venus has significant amounts of liquid water, so it is less likely that sedimentary rocks are a major product of geological processes on Venus.

Therefore, based on the available evidence, Claim 2 is better supported than Claim 1.

Learn more about Venus here:https://brainly.com/question/28479993

#SPJ1

The most likely answer is Claim 2: Venus's rock transformation processes form mostly igneous rock is best supported by the evidence.

This is because the surface of Venus is dominated by volcanic features, such as lava flows and volcanic plains, which suggest a history of extensive igneous activity.

Additionally, the composition of Venus's atmosphere and surface rocks, as measured by various spacecraft, also indicate a predominantly igneous origin.

While some sedimentary rocks may exist on Venus, they are likely a minor component compared to igneous rocks.

P.S: Your question is incomplete and this is the best fit given the sparse question.

Read more about igneous rock here:

https://brainly.com/question/27094302

#SPJ1

Answer:

OB. Adams

Explanation:

A rural area is an open swath of land that has few homes or other buildings, and not very many people.

Life on earth is based on a salt-water metabolism.

A world without salt water would be a boon to humanity, but it would also decimate marine life and affect our global temperature and weather dramatically, making human life on Earth incredibly complicated.

5 Things that would impact or be different on earth if the oceans were not salty are:

1. An ocean without salt would decimate marine life and affect our global temperature and weather dramatically, making human life on Earth incredibly complicated.

2. Marine life- If the sea were to become desalinated, we’d likely never get the chance to find those new forms of life.

3. World weather- This would be most noticeable at the Equator since our ocean currents would no longer circulate warm water and air currents the way they used to.

4. Plant- marine plant life would also be affected. Underwater algae account for almost half the photosynthesis occurring on this planet.

5. Salt reductions- A liter of seawater contains around 35g of dissolved salt, so desalinating the entire ocean would involve removing 45 million billion tons of salt.

To learn more about Oceans,

https://brainly.com/question/29464002

Answer: Red-figure Pottery

Explanation: Red-figure Pottery is a style of Greek vase painting invented in Athens c. 530 BCE. The style has drawn red figures and a painted black background. Red-Figure Pottery grew in popularity, and by the early 5th century BCE it had all but replaced black-figure pottery as the predominant pottery type in Athens. The last recorded examples are from c. 320 BCE.

If you wanted to correctly map the total area of the globe covered by rain forests, you would select an equal-area (equivalent) projection.

An equal-area (equivalent) projection would be the best choice to map the total area of the globe covered by rain forests. This type of projection preserves area relationships, ensuring that the rainforest area is represented accurately. Since rainforests are an essential part of the world's ecosystem, it is important to represent them accurately on maps, and an equal-area projection can achieve that.

On the other hand, if you wanted to create a map that accurately showed the general shape of the continents, a conformal projection would be the best option. This type of projection preserves angular relationships around points, maintaining shape, which is crucial for accurately representing the continents' general shapes. While this projection does not preserve areas and distances perfectly, it can still create a map that accurately shows the relative shapes of the continents.

It is essential to choose the right map projection to achieve the desired goals of the map. Each projection has its strengths and weaknesses, and it's important to consider the intended use of the map and the properties that are most important to preserve. Ultimately, the selection of an optimum projection will depend on the purpose of the map and the information being conveyed.

To learn more about rain forests, click here:

https://brainly.com/question/1987997

#SPJ4

Answer:

2.6% annual change (2021)

Hope it helped! :)

It should be noted that the correct options to fill will be:

First blank - Constant velocity

Second blank - remains stationary

Third blank - constant velocity.

For the segments A to B and C to D, the slope will be calculated as - ∆y/∆x. Since ∆y represents a change in position and ∆x represents a change in time, the resultant will be velocity. As the graph increases linearly, it shows constant velocity.

From segment B to C, the value of x-axis increases while that of y-axis remains constant. Thus, the object becomes stationary.

Learn more about graph on:

https://brainly.com/question/19040584

#SPJ1

Understanding the structure of the Earth is important for several reasons:

Overall, understanding the structure of the Earth is essential for a wide range of scientific fields, and has practical implications for everything from disaster preparedness to resource extraction to climate change research.

Answer:

1. onshore current: landward motion of water 2. onshore transport: Landward movement of sediment 3. longshore current: Motion of water parallel to shore 4. longshore transport: movement of sediment parallel to shore

Explanation:

Answer:

Tsunami

Explanation:

When these plates fracture during strong earthquakes of great impact (greater than 7 on the Richter scale), a vertical movement is produced that creates waves by raising a huge column of water, giving rise to a tsunami.

Mafic minerals would likely crystallize early from magma. The right answer is option 1.

Some of the silica in a mafic minerals interacts with iron and magnesium to form olivine as it begins to cool. The silica that is still present transforms into calcium-rich plagioclase as it cools more, and any silica that is still present may be used to turn some of the olivine into pyroxene.

Shortly afterwards, all of the magma is consumed, and nothing else changes. Gabbro will result from the magma cooling slowly beneath, while basalt will result from the magma cooling swiftly at the surface. When crystallisation first starts, felsic magmas are typically cooler than mafic magmas.

The correct answer is option 1.

Know more about Mafic minerals here

https://brainly.com/question/12441687

#SPJ4

Answer:

Explanation:

Answer:

i got u i have your email

Step-by-step explanation: