Explanation:
when we use our circular coil, the magnetic field will always be perpendicular to the area vector.thus, due to this, sin wt gives sin 90 degree and that gives 1, giving maximum linking of flux associated with the coil at any position .
Answer:
When we use a circular coil, the magnetic field will always be perpendicular to the area vector. Thus, due to this, sinωt gives sin90∘ and that gives 1 , giving maximum linking of flux associated with the coil at any position.
Explanation:
A pot of water is boiled on a stove. Which of the following definitions of the system enables the most straightforward thermodynamic analysis of the process
A. The system is the pot and water.
B. The system is the stove, pot, and water.
C. The system is the building containing the stove.
D. The system is the entire Universe.
Answer:
A. The system is the pot and water.
Explanation:
Thermodynamics is an aspect in science which deals with the applications of heat energy. The useful applications of heat energy to perform work.
In the given question, the pot and water is the system which both absorbs heat energy from the stove. Thus, the system is a closed system since it shares heat energy with its surroundings.
The surrounding of the system extends from the boundary of the pot to the universe.
A ___ force is not path-dependent and does not change the overall mechanical energy of an object.
Answer:
conservative
Explanation:
Nonconservative force is the force that depends on a path, however conservative does not depend on a path and it is not associated with the potential energy. When the work is done by an unconservative force, mechanical energy is added or removed. Friction is the best example for a non-conservative force. When these non-conservative forces are acting, the mechanical energy changes but these are not preserved.
hope this helped!
Answer: conservative
Explanation:
A conservative force is not path-dependent and does not change the overall mechanical energy of an object.
A conservative force is a force with the property that the total work done in moving a particle between two points is independent of the taken path, e.g. gravitational force or electric force.
A nonconservative force is one for which work depends on the path taken, e.g. frictional force.
What is the velocity of the objects position vs time graph
Answer: In a position-time graph, the velocity of the moving object is represented by the slope, or steepness, of the graph line. If the graph line is horizontal, like the line after time = 5 seconds in Graph 2 in the Figure below, then the slope is zero and so is the velocity. The position of the object is not changing
Question 10 of 10
2 Points
Which of the following best describes how the Federal Reserve Bank helps
banks during a bank run?
A. The Federal Reserve Bank acts as an insurance company that
pays customers if their bank fails.
B. The Federal Reserve Bank regulates exchanges to prevent the
demand for withdrawals from rising above the required reserve
ratio.
C. The Federal Reserve Bank has the power to take over a private
bank if customers demand too many withdrawals.
D. The Federal Reserve Bank can provide a short-term loan to banks
to prevent them from running out of money.
Answer:
D. The Federal Reserve Bank can provide a short-term loan to banks
to prevent them from running out of money.
Explanation:
A bank run occurs when a large number of depositors withdraw their deposits simultaneously from a bank.
As the number of withdraws increases, the available cash in the bank decreases until a point that the bank can't give depositors their money.
In these situations, The Federal Reserve Bank acts as a lender of last resort that helps to reinforce the effect of deposit insurance, and to reassure bank customers that they will not lose their money.
which type of circuit is shown?
A. closed series circuit
B. closed parallel circuit
C. open parallel circuit
D. open series circuit
Answer:
I think it's D. open series circuit .
Explanation:
hope it helps you!
Calculate the wavelength of a nitrogen molecule moving at a speed of 523m/s.
Answer:
The de-Broglie wavelength of the nitrogen molecule is 0.0272 nm
Explanation:
The mass, m, of the nitrogen molecule, N₂ = 14.0076u = 28.0152 × 1.66 × 10⁻²⁷ kg
[tex]v_{rms}[/tex] of N₂ = 523 m/s
The de-Broglie wavelength is given as follows;
[tex]de-Broglie \, wavelength = \dfrac{h}{m\times v_{rms}}[/tex]
Where:
h = Planck's constant = 6.62607004 × 10⁻³⁴ m²·kg/s
Plugging in the values, we have;
[tex]de-Broglie \, wavelength = \dfrac{6.62607004 \times 10^{-34}}{28.0152 \times 1.66 \times 10^{-27}\times 523} = 2.72\times 10^{-11} \, m[/tex]
Hence, the de-Broglie wavelength of the nitrogen molecule = 0.0272 nm.
Together, two students exert a force of 825 N in pushing a car a distance of 35 m.
How much work do the students do on the car?
Answer:
28875 Joule
Explanation:
W = F * d
W = 825*35 = 28875 J
The work done by the students in pushing a car at a distance of 35 meters would be 28875 Joules.
What is work done?The total amount of energy transferred when a force is applied to move an object through some distance
The work done is the multiplication of applied force with displacement.
Work Done = Force * Displacement
As given in the problem Together, two students exert a force of 825 Newtons in pushing a car at a distance of 35 meters, then we have to find out the work done by the students,
The force exerted by the students = 825 Newtons
The distance moved by car = 35 meters
work done by students = 825×25
=28875 Joules
Thus, the work done by the students would be 28875 Joules.
To learn more about work done, refer to the link;
brainly.com/question/13662169
#SPJ2
4. How does a molecule differ from an atom? (4 points)
how much work must be done by frictional forces in slowing a 1000-kg car from 26.1 m/s to rest?
Answer:
Explanation:
Work done by the frictional force is 3.41x10^5 J
It is given that,
Mass of the car, m = 1000 kg
Initial velocity of car, u = 26.1 m/s
Finally, it comes to rest, v = 0
We have to find the work done by the frictional forces. Work done is equal to the change in kinetic energy as per work - energy theorem i.e.
W = −340605 J
or Hence, the correct option is (a).
Boats use echo sounders. Pulses of sound waves are reflected by the sea bed and
detected by a sensitive microphone. The time between an echo sounder sending and
receiving a pulse is 0.005 s. The device calculates the depth of the sea, using the speed
of sound in sea water, which is 1500 m/s.
Use this information to calculate the depth of the sea. Show your working.
Answer: depth = 3.75 m
Explanation:
Taken the speed of the sound in sea to be V = 1500 m/s
The time between an echo sounder sending and receiving a pulse is 0.005 s. That is,
Total time T = 0.005
Formula for echo is:
V = 2X/T
Where X = distance covered
Substitute V and T into the formula
1500 = 2X/0.005
Cross multiply
7.5 = 2X
Make X the subject of formula
X = 7.5/2
X = 3.75 m
Therefore, the depth of the sea is 3.75 m
The temp of equal masses of three different liquids A,BandC are 12°C,19°Cand 28°Crespectively . The temp when A and B are mixed is 16°C, and when Band C are mixed is 23°C.The temp when A and C are mixed is
Answer:
19.1°C
Explanation:
If A and B mix to give 16°C, A has risen by 4°C and B has fallen by 3°C;
If B and C mix to give 23°C, B has risen by 3°C and C has fallen by 5°C;
This means the energy transfered to cause a change of 3°C in B causes a change of 4°C in A and 5°C in C;
We can use this as a ratio (4:5);
The temperature difference between A and C is 16°C;
we add the two parts of the ratio (4+5) to get 9 and divide the temperature difference to get 16/9;
Next we multiply this by one of the parts of the ratio, so with 4, you get 64/9;
This number is the proportional temperature change in A upon mixing;
We then add this to the original temperature of A to get the resultant temperature of the mix like so:
64/9 + 12 = 19.1111...
You can do this alternatively using the other part of the ratio;
We would multiply the 16/9 by the 5 instead of the 4 to get 80/9;
This number is the proportional change in temperature in C upon mixing
Then subtract this from this from the original temperature of C and you should get the same answer:
28 - 80/9 = 19.1111...
what is the equivalet tempreture of 0 kelvin in celcius scale
HELP NEED IT IN 5 MIN
Answer:
-273.15 degree celcius
Explanation:
Help.
Why do scientists believe that global warming is happening?
What force is required to give an object with mass 2000 kg an acceleration of
3.5 m/s2?
A. 571 N
B. 7000N
C. 10,500 N
D. 2535 N
Answer:
B
Explanation:
7,000N because the formula for finding force is F=MA (2000x3.5)N=7000N
The law of conservation of energy states that
A. energy cannot be converted from one from to another
B. energy cannot be created or destroyed
C. energy resources must be used efficiently
D. energy is constantly being lost to friction
Answer:
B
Explanation:
Energy can not be destroyed only converted into another form of energy
What was Neptune's distance from the Sun in 1989?
Answer:
4.5 Billion km :)
Explanation:
thats how it is
Answer:
About 3.8 billions miles from the Sun OR 4.82 kilometers
hope this helped!
Which of the following is an example of a visual aid? A. a poster B. a pair of glasses C. a set of note cards D. a copy of a written report
Answer:
a pair of glasses
of course
Liquefication occurs when
Answer: Liquefaction occurs when the structure of a loose, saturated sand breaks down due to some rapidly applied loading.
As the structure breaks down, the loosely-packed individual soil particles attempt to move into a denser configuration. Liquefaction most often occurs when three conditions are met:
loose, granular sediment or fill
saturation by groundwater
strong shaking
Answer:
heat is applied
Explanation:with metal and ice
Which graph shows the correct relationship between kinetic energy and speed?
Answer: D
Explanation:
Kinetic energy = 1/2mV^2
From the formula above, we can deduce that kinetic energy is proportional to the square of speed. That is,
K.E = V^2
Graphically, the relationship isn't linear but a positive exponential. Therefore, option D is the correct answer.
Answer:
The correct answer is D.
Explanation:
Hope this helps.
What is general relativity
An object with a mass of 120 kilograms is moving at a velocity of 30m/s what’s its momentum
Explanation:
Momentum = mass × velocity
p = mv
p = (120 kg) (30 m/s)
p = 3600 kg m/s
Given:
velocity, v = 30m/s
mass, m = 120kg
Therefore, momentum
p = mv
p = 120kg * 30m/s
p = 3600 kgm/s = [tex]3.6 * 10^3 kgms^{-1}[/tex]
What is a simple definition of momentum?A property of a moving body that the body has by virtue of its mass and motion and that is equal to the product of the body's mass and velocity broadly.
What is momentum used for in physics?Momentum is a vector quantity, it has both magnitude and direction. Since momentum has a direction, it can be used to predict the resulting direction and speed of motion of objects after they collide.
Learn more about Momentum here
https://brainly.com/question/904448
#SPJ2
Please help me answer this question! Will appreciate help very much. a) Draw a circuit to show 3 lights in series b) Draw a circuit to show 2 lights in parallel c) Draw a circuit that shows 2 lights in parallel which are both in series with a third light. d) What would happen to the 2 other lights if the third light in question c) fails
Answer:
C kind sir
Explanation:
Please Help! When drawing free-body diagrams, does the label "centripetal force" get used? Explain why.
Explanation:
No. Centripetal force is a not a force itself, but rather a sum of forces. From Newton's second law:
∑F = ma
∑F = m v²/r
So centripetal force does not get used on a free body diagram.
____ charges are attract each other
Answer:
One positive and one negative
Which of the following statements best describes the second law of
thermodynamics?
A. Heat flows spontaneously from hot to cold, and entropy
decreases.
B. Heat flows spontaneously from hot to cold, and entropy increases.
C. Heat flows spontaneously from cold to hot, and entropy increases.
D. Heat flows spontaneously from cold to hot, and entropy
decreases.
Answer:
B
Explanation:
Heat flows from hot to cold to lower the temperature of hot areas and increase temperature of cold areas. The end result is that the 2 areas have the same temperature, thus increasing entropy.
Heat flows spontaneously from hot to cold, and entropy increases.
The second law of thermodynamics relates to the entropy of a system. According to the second law of thermodynamics, the total entropy of a system may increase or remain constant in a spontaneous process.
The implication of this is that the entropy of a system never decreases. The entropy of a system increases when heat flows from a hot to a cold body and not vice versa.
Hence, the statement that; "Heat flows spontaneously from hot to cold, and entropy increases" describes the second law of thermodynamics.
how does the direction of acceleration compare with the direction of the net force that produces it
Answer:
Explanation:
The direction of the acceleration is in the same direction as the net force causing it. F = ma is actually a vector equation in which f and a are both vectors and m is a scalar constant.
Do you think a population besides the moon jellies’ consumer population (sea turtles) and resource population (zooplankton) could have caused the moon jelly population to increase in size?
Answer:
I didn't quite understand your question, but the moon jelly population will increase if there are either more zooplankton or less sea turtles.
More zooplankton means more food => higher population
Less sea turtles means that the moon jelly will be lest often consumed => higher population
Answer: Yes because the Orca will start to eat the moon jellies
Explanation: When the Sea Turtles start to get very low on population the Moon jellies are next in line also the sea turtles eat the moon jellies and since they eat the moon jellies the sea turtle has a bit of that taste in them so they will taste alike to the sea turtles.
Light ray A moves from air to water. Part of ray A is reflected at the air-water boundary. Which arrow in the image is the reflected ray?
E
OA. B
OB.
С
OC.
D
OD. E
Answer:
A. B
Explanation:
The image has been attached.
Reflected ray refers to the ray of light which is reflected back after striking a surface that is non-permeable.
The ray of light which is reflected before the ray touches the surface is said to the incident ray.
According to the given image, ray B is the reflected ray. Ray B is reflected in the air after the ray A strikes at the surface of the water.
B
Explanation:
Since mirrors reflect things, when you shine light at a mirror, it will bounce off of the mirror, or reflect, and shine the opposite direction of where the original light is pointed. The answer would be B because light doesn't go through the mirror, or run along it.
Think of when you through a basketball on the ground. If you bounce it at an angle, it won't just come back to you in the same angle. It will keep bouncing at the same angle you through it. This is pretty much what describes the relationship between ray A and ray B.
HOPE THIS HELPS!!!!!
Help needed.
(1) A small object carrying a charge of
[tex] - 5 \times {10}^{ - 9} \: c[/tex]
experiences a downward force of 10 Newton when placed at a certain point in an electric field
What is the electric intensity at that point.
2. Determine the electric potential due to a charge of
[tex]12 \times {10}^{ - 9} c[/tex]
at a point 6 cm from the charge.
3. A series arrangement of three capacitors of value at 8micro Farahds, 12 micro Farahds and 24 micro Farahds is connected in series with a 90—V battery
(a) Draw and open circuit diagram for this arrangement (b). Calculate the effective capacitance in the circuit
(c) On closed circuit calculate the charge on each capacitor when fully charged
(d) Determine the PD across the 8 micro Farahds capacitors.
Answer:
1. -2×10 ^-9
2. 1800v
3 (ii) 4micro Farhad
(iii) V = 3.60 ×10²
(Iv) 45v
Explanation:
I hope it helps
Identify the clean sources of energy.
Answer:
biomass, geothermal, hydropower, solar, and wind.
hope this helped!
