what's the geometry of sp³ hybridization ~ ​

N₂ + 3H₂ → 2NH₃

moles N₂ = 1/3 x 6.25 = 2.083

Answer:

2.083 moles of N₂ would be required to react with 6.25 moles of H₂.

Explanation:

Let us first write the balanced chemical equation :

      N₂ + 3H₂ → 2NH₃

Therefore from this equation it is clear that:

3 moles of H₂ require 1 mole of N₂

∵ 1 mole of H₂ requires [tex]\frac{1}{3}[/tex]  moles of N₂

∵ 6.25 moles of H₂ requires [tex]\frac{(1*6.25)}{3}[/tex][tex]=2.083[/tex] moles of N₂

MOLE CONCEPT :

The mole is an amount unit similar to familiar units like pair, dozen, gross, etc. It provides a specific measure of the number of atoms or molecules in a bulk sample of matter. A mole is defined as the amount of substance containing the same number of discrete entities (such as atoms, molecules, and ions) as the number of atoms in a sample of pure 12C weighing exactly 12 g. One Latin connotation for the word “mole” is “large mass” or “bulk,” which is consistent with its use as the name for this unit. The mole provides a link between an easily measured macroscopic property, bulk mass, and an extremely important fundamental property, number of atoms, molecules, and so forth.

To know more about mole concept refer to:

https://brainly.in/question/1062729

#SPJ12

Answer:

a solution: for example when sugar is dissolved in water it becomes a sugar solution

One of the postulates in John Dalton's atomic theory was later subjected to change was that Various scientists found that atoms consist of subatomic particles with varying mass and charge. option C is correct.

An atom is consist of three sub atomic particles called proton, neutrons and electrons also known as the fundamental nit of an atom.

Atom consist of an nucleus into which proton and neutrons are present and protons are positively charged whereas neutrons are neutral and electrons revolve around the nucleus in the fixed paths called shells and negatively charged.

Therefore, the postulates in John Dalton's atomic theory was later subjected to change was that Various scientists found that atoms consist of subatomic particles with varying mass and charge. option C is correct.

Learn more about subatomic particles, here:

https://brainly.com/question/7221719

#SPJ1

Answer:

D. some scientists found that bonds between atoms are broken rearranged or reformed during reactions. According to Dalton's other theories, this is the only one that differentiates from his original theories :)

Explanation:

Al₂(SO₄)₃

= 2.Al+3.S+12.O

= 2.27 + 3.32+12.16

= 54+96+192

=342 g/mol

When the potato is put into the distilled water, it will absorb the water. The water is trying to dilute the salt inside the potato.

What is the meaning of concentrated?

The concentration of a solution is a measure of the amount of solute that has been dissolved in a given amount of solvent or solution.

When the potato is put into the distilled water, it will absorb the water. The water is trying to dilute the salt inside the potato.

Since potatoes already contain sugar, less water will diffuse out of the potato placed in sugar water. The slice placed in water will be rigid since it will absorb water.

Learn more about the concentration here:

https://brainly.com/question/17242527

#SPJ1

The energy source from a reservoir would provide affordable, abundant electricity for a factory is a hydroelectric power plant; option D.

Energy is the ability to do work.

Energy generating plants may either use wind, water or solar energy to produce electrical energy.

The most abundant source of energy from a reservoir is hydroelectric power plant.

Therefore, the energy source from a reservoir would provide affordable, abundant electricity for a factory is a hydroelectric power plant.

In conclusion, hydroelectric power plants are reservoirs of abundant energy supply.

Learn more about hydroelectric power plants at: https://brainly.com/question/3406557

#SPJ1

Answer:

Just Barely Base/Neutral

Explanation:

a pH of 8.0 is greater than Neutral (7.0) but is still neutral due to it being more neutral than a base

Answer:

The Coefficient is 1

Explanation:

The speed of light through space is 300 million m/s .

There was a time when everybody thought that there is no limit for the speed at which an object can travel , but Einstein gave the limit which is the speed of light.

The speed of the light in vacuum travels at a speed of 300 million m/s .

Therefore The speed of light through space is 300 million m/s .

To more about Limit of the speed

https://brainly.com/question/8900007

#SPJ1

Answer:

a.  P = 320 mmHg

Explanation:

For this problem, the pressure, volume, and temperature are changing, so we'll need to combine Boyle's Law and Charles' Law:

[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}[/tex]

For this equation, the temperatures must be measured in Kelvin.  The rest of units in the equation only need to match between beginning and end conditions.

Recall that to convert from Celsius to Kelvin, add 273, or use the equation [tex]T_C+273=T_K[/tex].

So [tex]T_1=(44.4+273)[K]=317.4[K][/tex]  and [tex]T_2=(68.1+273)[K]=341.1[K][/tex]

Substituting known values, we can solve for the unknown:

[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}[/tex]

[tex]\dfrac{(574.6[mmHg])(208.1[mL])}{(317.4[K])}=\dfrac{P_2(401.5[mL])}{(341.1[K])}[/tex]

[tex]\dfrac{(574.6[mmHg])(208.1[mL]\!\!\!\!\!\!\!\!\!\!{--} )}{317.4[K]\!\!\!\!\!\!{-}}*\dfrac{341.1[K] \!\!\!\!\!\!{-}}{401.5[mL] \!\!\!\!\!\!\!\!\!\!\!{--} }=\dfrac{P_2(401.5[mL] \!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{-----})}{341.1[K] \!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{----}}*\dfrac{341.1[K] \!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{----}}{401.5[mL] \!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{-----} }[/tex]

[tex]320.056719296[mmHg]=P_2[/tex]

Accounting for significant figures, [tex]P_2=320.1[mmHg][/tex].  

The closest answer provided is 320, so "a".

Answer:

protein molecule

Explanation:

Answer: Protein

Explanation:

Amino acids from protein molecules.

Answer:

A. CO2 and CH4

The two major greenhouse gases are CO₂ and CH₄ and the correct option is option A.

Greenhouse gases are gases in Earth’s atmosphere that trap heat. They let sunlight pass through the atmosphere, but they prevent the heat that the sunlight brings from leaving the atmosphere.

These gases have the property of absorbing infrared radiation (net heat energy) emitted from Earth’s surface and reradiating it back to Earth’s surface, thus contributing to the greenhouse effect.

Each of these gases can remain in the atmosphere for different amounts of time, ranging from a few years to thousands of years.

Examples of greenhouse gases are carbon dioxide, methane and water vapour.

Therefore, the two major greenhouse gases are CO₂ and CH₄ and the correct option is option A.

Learn more about Greenhouse gases, here:

https://brainly.com/question/10569848

#SPJ7

The plastic region of the stress-strain curve for a metal is characterized by a proportional relationship between stress and strain.

Stress-strain curve serves as the curve that help to show the relationship between stress and strain of a particular material especially in engineering.

With these curve the  reaction of a material when a load is applied can be known before using the material for construction work.

Read more on stress-strain curve here:

https://brainly.com/question/13110518

#SPJ11

NOTICE: There are attachments attached to this answer that is mentioned  in each paragraph!

We frequently see DNA replication as a well-organized, methodical process, much like a production line. It's not. For the DNA polymerase to read it, the DNA must not lie in a straight line and must be in motion, not static. It is curled and twisted. First, realize that this is a molecular issue. Bacteria lack neurons, cannot "think," and cannot make decisions. Everything is a chemical reaction, and chemical reactions frequently depend on one concentration's osmotic pressure being higher than another, both inside the cell and outside. Even at that level, there is a lot of "nothing," albeit nothing is empty. For a better understanding of the environment, picture a cell as a large room filled with balls of all sizes. Each ball has a unique form and isn't spherical; some balls fit together flawlessly while others don't. This is the easiest way to conceptualize the universe of molecular chemistry. There is never "nothing" other than in space when you push your way through layers upon layers of free oxygen, free nitrogen, helium, carbon dioxide, hydrogen dioxide, argon, methane, etc. when you walk through what we term "air."

Replication mistakes happen. Sometimes DNA polymerase enzymes add the incorrect nucleotide, too many, or too few nucleotides to a sequence. Or the DNA polymerase gets looped on the same strand, adding a few codons in a repetition before the strand slips away and it continues, or there is a tangle of crossing DNA and it jumps to the incorrect thread and back (or never), etc. In order to ensure that the bases added to a developing strand are appropriately matched with their complements, DNA polymerase enzymes are quite picky about the nucleotides they choose to use. However, these enzymes do make errors. Specifically, at a rate of around 1 per 100,000 nucleotides. Doesn't sound like much, but since each diploid cell has 6 billion base pairs, there are around 120,000 errors every cell division.

Ribosomal errors during transcription can even change the synthesis of the DNA polymerase proteins, leading to the creation of a mechanism that is already faulty. Since not all ribosomes are created equally, ribosome quality is important. Bacterial mutation rates are greater because bacterial ribosomes are less accurate and produce a lot more errors than human ribosomes. That is a benefit for simple, quickly reproducing life, which is also very vulnerable to the stresses of the molecular chemical environment. Unlike most more complex forms of life, which also have DNA repair mechanisms incorporated into the DNA polymerase, humans have these mechanisms. Some of these processes can often correct mistakes as soon as they are produced, while others can do so over time.

Regarding the pairing of C and T, etc. There are a number of balls in that room that, at first glance, appear to be identical, but if you compare two closely, you could find that one bump is larger or is located incorrectly even if it appears to be same. Proton shift is one such. Here are two instances using the purine guanine (G) and the pyrimidine thymine (T) (G). Please excuse my handwriting; I learned to type at a very young age. Shifted on the right, normal on the left. NA polymerase (as do most more complex forms of life) frequently correct mistakes as soon as they are made and others that correct mistakes later.

(ATTATCHMENT #1)

1.2 L of hydrogen can be produced at a pressure of 2 atm and a temperature of 298 K.

The ideal gas law (PV = nRT) relates the macroscopic properties of ideal gases. An ideal gas is a gas in which the particles (a) do not attract or repel one another and (b) take up no space (have no volume).

Step 1: Write the balanced equation

Mg + 2 HCl ⇒ MgCl₂ + H₂

Step 2: Calculate the moles corresponding to 2.3 g of Mg

The molar mass of Mg is 24.31 g/mol.

2.3 g × 1 mol ÷24.31 g = 0.095 mol

Step 3: Calculate the moles of H₂ produced

0.095 mol Mg × 1 mol H₂ ÷ 1 mol Mg = 0.095 mol H₂

Step 4: Calculate the volume occupied by the hydrogen

We will use the ideal gas equation.

P × V = n × R × T

V = n × R × T÷P

V = 0.095 mol × (0.0821 atm.L/mol.K) × 298 K÷2 atm

V =  1.2 L

Learn more about the ideal gas here:

https://brainly.com/question/27691721

#SPJ1

a. 2K₃PO₄ + 3MgCl₂ ----> Mg₃(PO₄)₂ + 6KCl

b. Fe + Na₂CO₃ -----> FeCO₃ + 2Na

c. CH₄ + 2O₂ ------> CO₂ + 2H₂O

d. H₂ + Cl₂ -------> 2HCl

Learn more about chemical reactions here:

https://brainly.com/question/26018275

#SPJ10

A heterogeneous mixture is not uniform in composition. Hence, option C is correct.

A heterogeneous mixture is a mixture in which the composition is not uniform throughout the mixture.

This substance is not an element or compound, because different components could be observed in the substance.  

A pure substance is made up of only one type of atom (element) or only one type of molecule (compound), mixtures and solutions are made from two or more types of pure substances.

For example, aluminium is an element and ammonia is a compound.

This substance is not a homogeneous mixture, because different samples of the substance appeared to have different proportions of the components.

Hence, this substance is a heterogeneous mixture.

Learn more about the heterogeneous mixture here:

https://brainly.com/question/11315552

#SPJ1

Answer:

heterogeneous mixture

Explanation:

Before the occurance of Fossil fuel, our energy needs were modest. For heat, we relied on the sun—and burned wood, straw, and dried dung For transportation, the muscle of horses and the power of the wind in our sails took us to every corner of the world.

Fossil fuels are made from decomposing plants and animals.

These fuels are found in the Earth's crust and contain carbon and hydrogen, which can be burned for energy.

Coal, oil, and natural gas are examples of fossil fuels.

Hence, Before the occurance of Fossil fuel, our energy needs were modest. For heat, we relied on the sun—and burned wood, straw, and dried dung For transportation, the muscle of horses and the power of the wind in our sails took us to every corner of the world.

Learn more about Fossil fuel here ;

https://brainly.com/question/2029072

#SPJ1

Answer:

B is the answer.

Explanation:

sry if wrong :D

Theoretical yield =0.15 g

% yield = 15%

reaction

C6H12O6 → 2C2H5OH + 2CO2

from above reaction, we get to know that,

1 mole of glucose → 2 mole ethanol

for 4 mole of glucose → 8 mole of ethanol

\frac{55.2}{8(46)} = yield of ethanol

yield of ethanol = 0.15g

% yield = (experimental/theoretical )*100

% yield of ethanol = 0.15 x 100 =15%

To know more about percentage yield refer to:-

https://brainly.com/question/12044380

#SPJ10

3531.23 J is the energy used to heat tin when 229.2 g of tin was heated from 46.3 to 115.7°C.

The specific heat capacity is defined as the quantity of heat (J) absorbed per unit mass (kg) of the material when its temperature increases by 1 K (or 1 °C), and its units are J/(kg K) or J/(kg °C).

Q=mcΔT

Give data:

m=229.2 g

c=0.222 J/g x °C

ΔT=115.7°C - 46.3°C

ΔT= 69.4 °C

Putting value in the equation:

Q=mcΔT

Q=229.2 g x 0.222 J/g°C x 69.4 °C

Q= 3531.23 J

Hence, 3531.23 J is the energy used to heat tin.

Learn more about the specific heat capacity here:

https://brainly.com/question/27919379

#SPJ1

Answer:

Ethyl magnesium Bromide

Answer:

Chemical reaction A, because the reactant is a compound

Explanation:

In a decomposition reaction, a compound is broken down into its components, so the number of products is greater than the number of reactants

Chemical reaction A, because the reactant is a compound is a statements correctly identifies the decomposition reaction and describes a substance involved.

When atoms establish or break chemical bonds, chemical processes take place. Reactants are the substances that begin a chemical reaction, while products are the compounds that are created as a result of the reaction.

Although a chemical reaction is not always a "one-way street," as we'll examine further in the next section, an arrow is drawn between the reactants and products to denote the direction of the reaction.

 Our equation must have them in it in order for there to be an equal number of atoms of each element on both sides of the equation.

Therefore, Chemical reaction A, because the reactant is a compound is a statements correctly identifies the decomposition reaction and describes a substance involved.

To learn more about chemical reaction, refer to the link:

https://brainly.com/question/29039149

#SPJ2

Answer:

CU

Explanation:

Cu is the correct answer if I'm correct

From the equation, we know that for every 2 moles of phosphorous acid produced, 1 mole of diphosphorus trioxide is consumed.

This means that we need to find the mass of 10.2/2 = 5.1 moles of diphosphorus trioxide.

So, the formula mass of diphosphorus trioxide is:

Thus, 5.1 moles have a mass of:

Answer: 561 g

Explanation:

The characteristics of a double replacement reaction as well as example to depict it are clearly explained below.

A double-replacement reaction is one that occurs when parts of two ionic compounds are exchanged thereby making two new compounds.

A characteristic of a double-replacement equation is that there are two compounds as reactants and two different compounds as products.

A precipitate forms in a double-replacement reaction when the cations from one of the reactants combine with the anions from the other reactant to form an insoluble ionic compound.

An example of a double displacement reaction is;

CuCl₂(aq) + 2AgNO₃(aq) → Cu(NO₃)₂(aq) + 2AgCl(s)

Due to the fact that a precipitate is formed, the double replacement reaction is also called a precipitation reaction.

Read more about double replacement reaction at; https://brainly.com/question/23918356

#SPJ1

Answer:

Solution. Carbonic acid is a dibasic acid with two replaceable hydrogen ions; therefore it forms one acid salt or one normal salt. Hydrochloric acid is a monobasic acid with one replaceable hydrogen ion and so forms only one normal salt.

Explanation:

[tex](40.0)(7.426)=\boxed{297.0 \text{ g (to 4 sf)}}[/tex]

There are three kinds of Hydrogen in  2-methyl-2-butene

The correct question is

How many kinds of  hydrogen atoms are present in 2-methyl-2-butene

Atom was discovered by Dalton's Atomic theory , he predicted that each element consist of large number of a very small thing known as atom.

In the structure of 2-methyl-2-butene there are 3 types oh Hydrogen

1. Attached to the Carbon atom connecting the methyl ion to the butene

2. Connected to the last Carbon atom

3. Connected to the Carbon bond having double bond.

Therefore there are three kinds of Hydrogen in  2-methyl-2-butene.

To know more about Atom

https://brainly.com/question/1566330

#SPJ1

The number of calories which are absorbed when water absorbs 6.55 KJ of energy is 1565.49 calories

To know the number of calories which are absorbed when water absorbs 6.55 KJ of energy, we shall begin by converting 6.55 KJ to joules (J). Details below:

1 KJ = 1000 J

Therefore,

6.55 KJ = (6.55 KJ × 1000 J) / 1 KJ

6.55 KJ = 6550 J

Finally, we shall convert 6550 J to calories. This is illustrated below:

4.184 J = 1 calorie

Therefore,

6550 J = (6550 J × 1 calorie) / 4.184 J

6550 J = 1565.49 calories

Thus, from the above calculations, we can conclude that the number of calories absorbed is 1565.49 calories

Learn more about conversion:

https://brainly.com/question/28645760

#SPJ1