when a parachutist jumps from an airplane, the parachute opens 52m thereafter the journey downwards continues with a deceleration of 2.0 ms -2 . consider that the parachutist reaches the ground with a speed of 3.1 ms- 2 , calculate: i. how long the parachutist was in the air?

Therefore, you would A) weigh much less on the moon than you would on Earth.

If you were sent to the moon, your weight would be noticeably altered. This is because the moon has significantly less gravity than Earth, about 1/6th of Earth's gravity.  However, your height, mass, and volume would not be altered noticeably. Height is determined by genetics and would remain the same, mass is a measure of the amount of matter in an object and would not change, and volume is a measure of the amount of space an object occupies and would also not be altered. It's important to note that the effects of long-term exposure to reduced gravity environments, such as those experienced by astronauts on the International Space Station, can have more significant impacts on physical properties, including bone density and muscle mass.

To know more about physical properties visit:

https://brainly.com/question/81085

#SPJ11

The speed of sound in water plays a significant role in refraction under water. As different layers of water have different temperatures, the speed of sound varies, leading to refraction.

However, changing the speed of sound in the water causes additional flows in the water, but not refraction. Refraction under water occurs only at the water surface since the speed of sound in water is much greater than that in air. Refraction under water is caused by the flows in the water rather than the differences in the sound speed. Therefore, the speed of sound in water is an essential factor to consider in understanding the phenomenon of refraction under water.
The speed of sound in water plays a significant role in underwater refraction. As water temperature varies across different layers, so does the speed of sound, resulting in refraction. This phenomenon occurs because sound waves travel faster in warmer water and slower in colder water, causing them to bend when they pass through regions with different temperatures. Contrary to the statement, refraction underwater is primarily influenced by the variations in sound speed, rather than flows in the water. Furthermore, while refraction can occur at the water surface due to the difference in sound speed between air and water, it also takes place within the water itself as a result of these temperature-based speed changes.

To know about refraction :

https://brainly.com/question/14760207

#SPJ11

A boulder at rest on a cliff would have the least amount of kinetic energy, as it is not in motion. The correct option is B.

Kinetic energy is the energy that an object possesses due to its motion. It is the energy that is required to accelerate a stationary object to its current speed. The kinetic energy of an object is dependent on its mass and velocity, with the formula for kinetic energy given by KE = 1/2mv^2, where KE is the kinetic energy, m is the mass of the object, and v is its velocity.

Option A, an airplane flying from New York to Los Angeles, would have a significant amount of kinetic energy due to its high velocity and mass.

Option C, a snail crawling along a sidewalk, would have a small amount of kinetic energy due to its slow speed and small mass.

Option D, a honeybee flying back to its hive, would have a moderate amount of kinetic energy due to its relatively high speed and small mass.

To learn more about Kinetic Energy click:

brainly.com/question/26472013

#SPJ1

The work done by the gravitational force in equalizing the liquid levels is 100.3 J.

The work done by the gravitational force in equalizing the liquid levels when the two vessels are connected can be calculated using the formula W = mgh, where m is the mass of the liquid, g is the acceleration due to gravity, and h is the difference in the liquid heights. Since the vessels are identical and contain the same liquid, the mass of the liquid in both vessels is the same.

Using the formula for the volume of a cylinder, we can calculate the volume of liquid in each vessel. V = πr^2h, where r is the radius of the base and h is the height. Substituting the given values, we get the volume of liquid in the first vessel as 0.01084 m^3 and the volume of liquid in the second vessel as 0.01992 m^3. The mass of the liquid can be calculated using the formula m = ρV, where ρ is the density of the liquid. Substituting the given density, we get the mass of the liquid in both vessels as 14.04 kg. Substituting all the values in the formula for work, we get W = 14.04 kg x 9.81 m/s^2 x (1.560 - 0.854) m = 100.3 J.

Therefore, the work done by the gravitational force in equalizing the liquid levels is 100.3 J.

To know about gravitational :

https://brainly.com/question/3009841

#SPJ11

The phenomenon of size constancy - whereby objects appear relatively constant in size despite variations in proximity or retinal image - is a remarkable aspect of human perception.

To maintain such consistency our brains rely on contextual cues and previous experience with object dimensions. Interestingly even when presented with ambiguous visual inputs we strive to decipher them by maintaining perceptions consistent with what we expect regarding the relative sizes of objects.

Learn about size constancy here https://brainly.com/question/28203335

#SPJ1

The correct answer is b) 2,300,000 K.

The proton-proton chain is a fusion reaction that occurs in the cores of stars, where hydrogen is converted into helium through a series of nuclear reactions. This process requires high temperatures and pressures to overcome the electrostatic repulsion between the positively charged protons, and initiate the fusion reaction.

The temperature required to initiate the proton-proton cycle is around 2,300,000 K, which is much higher than the temperature at the surface of the sun (about 5,800 K). At this temperature, the protons have enough kinetic energy to overcome their electrostatic repulsion and fuse together to form helium. This process releases a large amount of energy in the form of light and heat, which provides the energy that keeps stars like the sun shining for billions of years.

To know more about fusion reaction click this link -

brainly.com/question/28020465

#SPJ11

The exact size of a neutron star can vary depending on its mass, but a typical neutron star of 1 solar mass is predicted to have a diameter of approximately 20 kilometers.

A neutron star is an extremely dense object that forms when a massive star collapses in on itself after running out of fuel. The core of the star collapses under the force of gravity, and the protons and electrons combine to form neutrons. This results in a star that is incredibly dense, with a mass of about 1.4 times that of the Sun but a diameter of only about 20 kilometers. This is because the neutrons are packed incredibly tightly together, creating a state of matter that is unlike anything we experience on Earth.

The reason for the small size of a neutron star, despite its mass, is due to the extreme gravitational force compressing the neutrons together. This results in a very compact and dense object, leading to the estimated diameter of approximately 20 kilometers.

To know more about neutron visit:

https://brainly.com/question/31087562

#SPJ11

The light travels at the slowest speed through flint glass and at the fastest speed through water .The speed of light in a medium is dependent on the refractive index of that medium.

c. Flint glass (highest refractive index)

a. Corn oil

b. Ethyl alcohol

d. Water (lowest refractive index)

The refractive index determines how much the light is slowed down or sped up as it passes through a material compared to its speed in a vacuum.

To rank the four media from the one through which the light travels at the slowest speed to the one through which the light travels at the fastest speed, we need to consider their refractive indices.

The refractive indices for the given media are as follows:

a. Corn oil: Refractive index ≈ 1.47

b. Ethyl alcohol: Refractive index ≈ 1.36

c. Flint glass: Refractive index ≈ 1.66

d. Water: Refractive index ≈ 1.33

The higher the refractive index, the slower light travels in that medium. Therefore, ranking the media from the slowest speed to the fastest speed, we have:

c. Flint glass (highest refractive index)

a. Corn oil

b. Ethyl alcohol

d. Water (lowest refractive index)

For more such questions on speed of light.

https://brainly.com/question/104425

#SPJ8

The period of the motion is given by:

T = 2π√(m/k) where m is the mass and k is the spring constant.

Substituting the given values, we get:

T = 2π√(0.40 kg / 75.0 N/m) = 0.566 s

The velocity of the mass at the equilibrium point can be found by using the equation:

v = ωA where ω is the angular frequency and A is the amplitude.

The angular frequency can be calculated as:

ω = 2π/T = 11.08 rad/s

The amplitude is given as 0.20 m.

Substituting these values, we get:

v = ωA = (11.08 rad/s)(0.20 m) = 2.22 m/s

Therefore, the speed of the mass when moving through the equilibrium point is 2.22 m/s.

To know more about motion click this link -

brainly.com/question/2748259

#SPJ11

The voltage between the parallel conducting plates is 590 V.

(a) To calculate the electric field strength between the parallel conducting plates, we can use the formula:
E = V / d

the potential difference between the plates, we can subtract the potential at the zero volt plate from the potential at the other plate:
V = 590 V - 0 V = 590 V
E = 590 V / 10.0 cm = 59 kv/m



(b) To find the voltage between the plates, we can use the same formula as before, but rearrange it to solve for V:
V = E x d
V = 59 kv/m x 10.0 cm = 590 V

To know more about voltage visit :-

https://brainly.com/question/14513248

#SPJ11

The estimated frequency of the mass-spring system is approximately 14.14 Hz.

To estimate the frequency of the mass-spring system, we can use the equation:

f = (1/2π) * sqrt(k/m)

where f is the frequency of the system, k is the spring constant, and m is the mass.

Given that the amplitude of oscillation changes from 5mm to 1mm as the forcing frequency changes from 20 Hz to 40 Hz, we can assume that the system is undergoing resonance at some frequency between these two values.

At resonance, the amplitude of oscillation is maximum, and the frequency of the system is equal to the forcing frequency. Therefore, we can estimate the frequency of the system by finding the frequency at which the amplitude is maximum.

Using the given values, we can set up two equations:

5mm = (1/2π) * sqrt(k/m) * 20 Hz
1mm = (1/2π) * sqrt(k/m) * 40 Hz

Simplifying these equations, we get:

sqrt(k/m) = (5mm * 2π) / (20 Hz)
sqrt(k/m) = (1mm * 2π) / (40 Hz)

Squaring both sides of these equations and eliminating k/m, we get:

(5mm * 2π)^2 / (20 Hz)^2 = (1mm * 2π)^2 / (40 Hz)^2

Solving for the unknown variable, we get:

f = (1/2π) * sqrt((5mm * 2π)^2 / (20 Hz)^2 + (1mm * 2π)^2 / (40 Hz)^2)

f = 14.14 Hz (long answer)

To know more about frequency visit:-

https://brainly.com/question/29739263

#SPJ11

Answer: C

Explanation:

Conservation of momentum states that initial and final momentum must be conserved. If an object is thrown, its momentum will become non-zero, and thus to conserve momentum your momentum and thus your velocity will also become non-zero. Due to there being no friction, you will glide across the ice at a constant velocity until you eventually reach the edge of the pond, at which point you can get off of the ice.

This is a tricky situation to be in, but the best thing to do is to make sure you and any passengers in the vehicle are safe. Turn on your hazard lights and try to move as far onto the shoulder as possible. If you have emergency cones or flares, use them to create a safe distance between your vehicle and passing traffic.

If you can't move the vehicle at all, stay inside and call for roadside assistance or emergency services. Do not try to fix the vehicle or change a tire on the freeway, as this can be extremely dangerous. Be patient and wait for help to arrive.

If vehicle breaks down on a freeway and you are not able to move it off the road completely, the first thing you should do is to turn on your hazard lights to warn other drivers of your presence. If it is safe to do so, try to move your vehicle as far to the right side of the road as possible.

To  know more about lights visit :-

https://brainly.com/question/29322197

#SPJ11

In a simple RC circuit (resistor and capacitor), when connected to a battery for a long time, the capacitor will eventually reach its maximum charge. This maximum charge is determined by the product of the capacitance (C) and the voltage across the battery (V), expressed as Q = CV.

Depends on several factors, such as the capacitance of the capacitor, the voltage of the battery, and the resistance of the circuit. In general, after the network has been connected to the battery for a long time, the capacitor will eventually become fully charged. This means that the voltage across the capacitor will reach the same voltage as the battery.
However, the time it takes for the capacitor to become fully charged will depend on the capacitance of the capacitor and the resistance of the circuit. A larger capacitance or a higher resistance will result in a longer charging time.

The charge on the capacitor after the network has been connected to the battery for a long time will eventually reach the same voltage as the battery, but the time it takes to reach this state will depend on the capacitance and resistance of the circuit. After three time constants (τ), the capacitor is considered to be fully charged, where the time constant τ = RC (resistance multiplied by capacitance). At this point, the capacitor's voltage is approximately 95% of the battery voltage.

To know more about capacitor visit :-

https://brainly.com/question/30917709

#SPJ11

To play the note C (523 HZ) on a 30 cm violin string, you need to place your finger at a distance of 18 cm from the end of the string.

This is because the length of the string required to produce a certain frequency is inversely proportional to the frequency. Therefore, the length of the string needed to produce a higher frequency, such as C (523 HZ), is shorter than that needed to produce a lower frequency, such as A (440 HZ). The distance of 18 cm can be calculated using the formula L1/L2 = F1/F2, where L1 is the length of the string producing A (440 HZ), L2 is the length of the string producing C (523 HZ), F1 is the frequency of A (440 HZ), and F2 is the frequency of C (523 HZ).

To play the note C (523 Hz) on a violin with a 30 cm string length sounding the note A (440 Hz) without fingering, you need to calculate the new string length required for C. The frequency ratio between A and C is 523/440. To find the new length, divide the original string length (30 cm) by the frequency ratio: 30 cm / (523/440) ≈ 25.16 cm. To play the note C, place your finger approximately 4.84 cm (30 cm - 25.16 cm) from the end of the string.

To know about distance :

https://brainly.com/question/30262438

#SPJ11

To estimate the frequency of the mass-spring system, we can use the equation for the amplitude of forced oscillations:
A = (F0/m)/sqrt((w0^2-w^2)^2 + (b*w)^2)
where A is the amplitude of the oscillations, F0 is the amplitude of the external force, m is the mass of the system, w0 is the natural frequency of the system, w is the frequency of the external force, and b is the damping coefficient.

Using the given values, we can plug in the numbers for the two different frequencies and amplitudes:

For w = 20 Hz, A = 5 mm
For w = 40 Hz, A = 1 mm

Solving for w0, we get:

w0 = sqrt((F0/m)^2 + w^2 * sqrt((A^2 * b^2)/(F0^2/m^2 - A^2)))

By substituting the values for F0, m, b, A, and the two different frequencies, we can solve for w0 and estimate the natural frequency.

The estimated frequency of the mass-spring system is approximately 29 Hz.

to know more about frequency click this link

brainly.com/question/29739263

#SPJ11

The longest wavelength of light that will give constructive interference from opposite sides of the reflecting plates is twice the distance between the plates. The units of λ will depend on the units of d, but it will always be a length (e.g. meters, centimeters, etc.).

To find the longest wavelength that will result in constructive interference, we can use the equation:
2d = mλ
where d is the distance between the reflecting plates, λ is the wavelength of the light, and m is an integer representing the order of the interference pattern.
For constructive interference to occur, the path difference between the waves reflecting off opposite sides of the plates must be an integer multiple of the wavelength. In other words, the waves must be "in phase" and reinforce each other.
Since we want to find the longest wavelength that results in constructive interference, we can set m = 1 (the first order) and solve for λ:
2d = λ
λ = 2d
Answer: In air, the longest wavelength of light that will result in constructive interference from opposite sides of the reflecting plates is twice the distance between the plates. The units of the wavelength will depend on the units of the distance between the plates, but it will always be a length. So I hope this explanation helps clarify the concept of constructive interference and how it relates to the distance between the reflecting plates and the wavelength of the light.

To know more about constructive interference visit :

https://brainly.com/question/16622714

#SPJ11

The current that flows in each case is 3.33 A and 4.2 A respectively.

Power is a unit of measurement for how quickly work gets finished. Power is defined as the rate of production, or the amount of work done in a given amount of time. 

Case-1

Power consumed by the car's headlight, P = 40 W

Voltage of the light, V = 12 V

The expression for the power consumed by the car's headlight is given by,

P = VI

Therefore, current flowing,

I = P/V

I = 40/12

I = 3.33 A

Case-2

Power consumed by the car's headlight, P = 50 W

Voltage of the light, V = 12 V

Therefore, current flowing,

I = P/V

I = 50/12

I = 4.2 A

To learn more about power, click:

https://brainly.com/question/28875498

#SPJ1

Galaxies are indeed large groups of stars, and they can range in size from dwarf galaxies with only a few million stars to massive galaxies with trillions of stars. However, the stars within a galaxy are not stationary. They are in constant motion, but what keeps them from moving away from each other is gravity.

Gravity is a fundamental force of nature that attracts objects with mass toward each other. In a galaxy, the stars are held together by the gravitational pull of other stars. The combined mass of all the stars in a galaxy creates a powerful gravitational force that keeps them together. The more massive a galaxy is, the stronger its gravitational force, which in turn keeps the stars tightly bound.

In addition to gravity, there is also dark matter. Dark matter is a mysterious substance that makes up a significant portion of the universe's total mass. It is believed that dark matter exists within galaxies and that its gravitational pull helps hold the stars together.

In summary, the stars within a galaxy are kept from moving away from each other by the powerful force of gravity. This force is created by the combined mass of all the stars and is further strengthened by the presence of dark matter.

To know more about galaxies visit:

https://brainly.com/question/14602132

#SPJ11

When it comes to ranking extrasolar planets, there are a few key factors to consider. The first is gravitational force, which is determined by the mass and distance of the planet from its star. Planets with higher masses and closer distances to their stars will typically have stronger gravitational forces.
The second factor to consider is orbital period, which is the amount of time it takes for a planet to complete one orbit around its star. This is determined by the distance between the planet and its star, as well as the planet's mass and velocity. Planets with longer orbital periods will typically be farther from their stars and have lower masses.
Finally, Doppler shifts can also be used to rank extrasolar planets. These shifts occur when a planet's gravitational pull causes its star to wobble slightly, resulting in small shifts in the star's spectral lines. Planets with larger masses and closer distances to their stars will typically cause larger Doppler shifts.
Overall, it's important to consider all of these factors when ranking extrasolar planets. While gravitational force and orbital period are more straightforward measures, Doppler shifts can provide additional insights into the characteristics of these distant worlds.
The ranking task for extrasolar planets involves comparing gravitational force, orbital periods, and Doppler shifts. Gravitational force is the force that attracts two bodies with mass towards each other, and it depends on their masses and the distance between them. Planets with higher masses exert a stronger gravitational force on their host stars.
Orbital periods refer to the time it takes for a planet to complete one orbit around its star. Planets closer to their host star have shorter orbital periods, while those farther away have longer periods.
Doppler shifts occur when a star's light spectrum shifts due to the movement of the star towards or away from us, caused by the gravitational pull of orbiting planets. A larger Doppler shift indicates a stronger gravitational force exerted by the planet.
In ranking these factors, planets with stronger gravitational forces will cause larger Doppler shifts and have shorter orbital periods. As a result, massive planets close to their host star will rank higher in these aspects, while less massive planets farther away will rank lower.

To know more about Gravitational force visit:

https://brainly.com/question/29190673

#SPJ11

The angular acceleration of the rod about the pivot at the instant it is released is given by the formula α = g/l, where g is the acceleration due to gravity and l is the length of the rod. This assumes that there is no friction or other external forces acting on the system, resulting in a frictionless rotation.


Given that the rod is attached to a fixed frictionless pivot at one end, we know that there is no resistance due to friction at the pivot. When the rod is released from a stationary, horizontal position, it will experience a torque due to the force of gravity acting on its center of mass.
To find the angular acceleration of the rod about the pivot at the instant it's released, we can use the following steps:
1. Identify the torque acting on the rod: Since the rod is uniform, its center of mass is at the midpoint (l/2). The torque τ is given by the product of the force of gravity (mg) acting on the center of mass and the perpendicular distance to the pivot (l/2): τ = (mg)(l/2).
2. Calculate the moment of inertia (I) for the rod: For a rod of mass m and length l pivoted at one end, the moment of inertia is given by I = (1/3)ml^2.
3. Use Newton's second law for rotation to find the angular acceleration: According to this law, the torque τ is equal to the product of the moment of inertia (I) and the angular acceleration (α): τ = Iα.
4. Solve for angular acceleration α: Substitute the expressions for τ and I from steps 1 and 2 into the equation from step 3: (mg)(l/2) = (1/3)ml^2α. Now, solve for α: α = (3g)/(2l).
So, the angular acceleration of the rod about the pivot at the instant it's released is α = (3g)/(2l).

To know more about angular acceleration Visit:

https://brainly.com/question/30237820

#SPJ11

The magnetic field at the center of each turn of the toroid is 1.86 * 10^-7 T/turn, given that the current is 29 mA and the solenoid has 21 turns per centimeter of its length. This is assuming that the radius of the toroid is small compared to the length of the solenoid.

To calculate the magnetic field at the center of each turn of the toroid, we need to use the formula for the magnetic field inside a solenoid, which is given by B = u0 * n * I, where B is the magnetic field, u0 is the permeability of free space, n is the number of turns per unit length, and I is the current flowing through the solenoid.
In this case, we have a solenoid with 21 turns per centimeter of its length, which means that n = 21 turns/cm. However, the solenoid is twisted into a circle to form a toroid, so the length of the toroid is the same as the circumference of the circle, which is 2 * pi * r, where r is the radius of the circle.
Assuming that the radius of the toroid is small compared to the length of the solenoid, we can approximate the length of the toroid as L = 2 * pi * r * (21 turns/cm). Therefore, the number of turns in the toroid is N = 21 * L = 42 * pi * r turns.
The current flowing through the solenoid is given as 29 mA. Substituting these values into the formula for the magnetic field inside a solenoid, we get:
B = u0 * n * I = 4 * pi * 10^-7 * 21 turns/cm * (29 * 10^-3 A) = 2.46 * 10^-5 T
Since the magnetic field inside a toroid is constant and equal to the magnetic field at the center of each turn of the toroid, the magnetic field at the center of each turn of the toroid is:
B' = B / N = (2.46 * 10^-5 T) / (42 * pi * r turns) = 1.86 * 10^-7 T/turn

To know more about magnetic field visit :

https://brainly.com/question/32099073

#SPJ11

The potential difference between the ends of the resistor is 40 volts.

The potential difference (voltage) between the ends of a resistor can be calculated using Ohm's law, which states that V = IR, where V is the voltage, I is the current, and R is the resistance.

In this case, the resistance is 20 ohms and the current is 2 amperes. Hence, applying Ohm's law we get:

V = IR = 2 A * 20 Ω = 40 V

Therefore, the potential difference between the ends of the resistor is 40 volts.

Learn more about potential difference on

https://brainly.com/question/24142403

#SPJ1

A resistance of 20ohms has a current of 2 amperes flowing in it. What potential difference is there between its ends ?

In order for a process to be fully reversible, it must be both internally and externally reversible. A process with work and heat interaction can only be internally reversible if it occurs under conditions of constant temperature and pressure.

However, in most real-world situations, temperature and pressure are not constant, making the process irreversible. Therefore, a process with work and heat interaction cannot be fully reversible. This is because heat transfer is inherently irreversible due to the second law of thermodynamics, which states that heat flows naturally from hot to cold objects, causing an increase in entropy. Thus, while a process with work and heat interaction can be internally reversible, it cannot be fully reversible.
Yes, a process with both work and heat interactions can be a fully reversible process. Reversible processes are those that can return to their initial state without any change in the surroundings. For a process to be fully reversible, the work and heat interactions must be done in infinitesimal steps with minimal dissipation. In a reversible process, the system remains in a series of equilibrium states, allowing it to return to its original state without any net effect on the system or surroundings. However, achieving a fully reversible process is only a theoretical concept, as in practice, there will always be some energy loss or irreversibility.

To know about reversible:

https://brainly.com/question/27711103

#SPJ11

Therefore, if the primary coil has 220 turns and the secondary coil has 440 turns, the ratio of the number of turns is 1:2. This means that the voltage in the secondary coil will be double that of the voltage in the primary coil.

According to the transformer equation, the ratio of the number of turns in the primary coil to the number of turns in the secondary coil is equal to the ratio of the voltage in the primary coil to the voltage in the secondary coil.  So, if the ac voltage applied to the primary coil is 160 V, the voltage in the secondary coil will be 320 V (160 V x 2). It's important to note that this calculation assumes ideal transformer behavior, and there may be losses due to resistance and other factors in real-world applications.

to know more about transformer equation visit:

https://brainly.com/question/29019143

#SPJ11

The law of inertia applies to objects in motion without any external force acting upon them. However, friction and air resistance slow down a bicycle, so pedaling is necessary to maintain motion.

The law of inertia, also known as Newton's first law of motion, states that an object at rest will stay at rest, and an object in motion will continue in motion in a straight line at a constant speed unless acted upon by an external force. This means that if there were no friction or air resistance, a bicycle in motion would continue moving without any additional force needed to maintain its motion.

However, in reality, friction and air resistance are present, which slows down a bicycle's motion. To overcome this resistance and maintain motion, a cyclist needs to continuously apply force to the pedals to generate the necessary energy to keep the bicycle moving. This force is necessary to overcome the resistance and maintain the bicycle's speed. Therefore, while the law of inertia still applies, the presence of friction and air resistance requires additional force to be applied to maintain motion in a bicycle.

Learn more about inertia here:

https://brainly.com/question/3268780

#SPJ11

The size of the breaker for a 120 volt water heater depends on the wattage of the heater and the amperage required to power it, typically a 15-amp breaker is used for a 1500W water heater.

To determine the correct breaker size, you need to divide the wattage of the heater by the voltage it operates on (120V) to get the amperage required.

For example, if your water heater has a wattage of 1500W, the amperage required would be:

Amperage = Wattage / Voltage

        = 1500W / 120V

        = 12.5A

In this case, you would need a 15-amp breaker to safely power the water heater.

It's important to choose a breaker that is rated for the amperage required by the water heater to prevent electrical overloading and potential damage to the wiring or electrical system.

It's always a good idea to consult with a licensed electrician to ensure that the breaker and wiring are installed correctly and meet local building codes and safety requirements.

Learn more about breaker

brainly.com/question/30795854

#SPJ11

A criminal is escaping across a rooftop and runs off the roof horizontally at a speed of 5.3 m/sec, hoping to land on the roof of an adjacent building. The maximum horizontal distance that the criminal can jump is approximately 1.077 meters.

We can use the equations of motion to solve this problem. Let's assume that the criminal jumps off the roof at time t=0.

In the horizontal direction, there is no acceleration, so the distance traveled is given by

d = vx*t

Where vx is the horizontal velocity (5.3 m/s) and t is the time of flight.

In the vertical direction, we can use the equation

y = y0 + vyt + 1/2a*[tex]t^{2}[/tex]

Where y is the vertical displacement (negative because the roof of the adjacent building is below the jumping-off point), y0 is the initial height (0 m), vy is the vertical velocity (0 m/s), a is the acceleration due to gravity (-9.8 m/[tex]s^{2}[/tex]), and t is the time of flight.

We can solve for t by setting y equal to -2.0 m

-2.0 m = 0 + 0t - 1/29.8*[tex]t^{2}[/tex]

Solving for t, we get

t = [tex]\sqrt{0.4/4.9}[/tex] = 0.203 s

Now we can substitute this value of t into the equation for d

d = 5.3 m/s * 0.203 s = 1.077 m

Therefore, the maximum horizontal distance that the criminal can jump is approximately 1.077 meters.

To know more about maximum horizontal distance here

https://brainly.com/question/18883114

#SPJ4

An electromagnet can be attracted to or repelled by a magnet, depending on the polarity of the two magnets. Option A.

In other words, the only option that is attracted to or repelled by a magnet is an electromagnet.

More on electromagnets can be found here: https://brainly.com/question/17057080

#SPJ1

An electromagnet will be attracted to a magnet.

option A.

A magnet is a material or object that produces a magnetic field. The magnetic field is a force that can attract or repel certain materials, such as iron, nickel, and cobalt.

Magnets have two poles, a north pole and a south pole, which are responsible for their magnetic properties. Like poles of magnets (north-north or south-south) repel each other, while opposite poles (north-south or south-north) attract each other.

A copper wire not carrying current will not be attracted or repelled by a magnet.

Thus, the only correct answer is an electromagnet.

Learn more about magnet here: https://brainly.com/question/26257705

#SPJ1

No, an object cannot be both a good absorber and a good reflector at the same time for a particular wavelength of radiation. When a material absorbs radiation, it absorbs the energy of the radiation, whereas when it reflects radiation, it sends the energy of the radiation back to the source.

Therefore, if an object is absorbing a lot of radiation, it is not reflecting much radiation, and vice versa. However, an object may be a good absorber and a good reflector of different wavelengths of radiation.

For example, a material may absorb visible light but reflect infrared radiation, or vice versa. This property is exploited in the design of materials such as thermal insulation and solar panels, which are designed to absorb or reflect certain wavelengths of radiation to achieve specific effects.

To know more about good reflector click this link -

brainly.com/question/29222460

#SPJ11