Answers
When tin is mixed with chlorine, a synthesis reaction occurs and the product of this reaction is SnCl₄ which is denoted as option C.
What is a Synthesis reaction?This is referred to as a reaction that occur when two different atoms or molecules interact to form a different molecule or compound under certain conditions.
In this scenario, we were told that the reactants are tin and chlorine and we can deduce that they react to form tin (IV) chloride which is denoted as SnCl₄ and the equation of the reaction can be seen below thereby making it the correct choice.
Sn + 2Cl₂ -> SnCl₄
Read more about Synthesis reaction here https://brainly.com/question/16281119
#SPJ1
Related Questions
A student writes the chemical equation of the reaction between lead and copper chloride. Pb(s) + CuCl₂(aq) →PbCl₂(aq) + Cu(s) Which option explains the reason for the formation of lead chloride? copper is more reactive than lead lead is less reactive than copper lead and copper are equally reactive lead is more reactive than copper
Answers
As a result of the reaction between lead powder and chlorine gas, solid copper is removed from copper in this displacement process.
A displacement reaction takes place when lead powder is added to a copper chloride solution, resulting in the formation of solid copper.
Lead chloride is created when lead is chlorided.
The lead atom displaces the copper atom in copper chloride, resulting in the production of copper and lead chloride.
As a result, this reaction is also known as a displacement reaction.
Learn more about displacement reaction from here:
https://brainly.com/question/24372098
#SPJ4
if the initial and re-test of total chlorine from the primary carbon tank sample testing port shows a result greater than 0.1ppm, then the teammate should understand:
Answers
Testing is performed after the secondary carbon filter.
What is carbon?
Carbon is the 15th most abundant element in the Earth's crust and the fourth most abundant element in the universe by mass, after hydrogen, helium and oxygen. Carbon's abundance, its unique diversity of organic compounds, and its unusual ability to form polymers at temperatures normally found on Earth allow this element to serve as a common element of all known life. It is the second most abundant element in the human body by weight (about 18.5%) after oxygenTo know more about carbon, click the link given below:
https://brainly.com/question/6836898
#SPJ4
To determine whether a chirality center is in the R or S configuration, start by mentally turning the molecule so that the lowest priority substituent usually a (Choose: Fluorine, Carbon, Hydrogen), is pointing (Choose: Forward, Backward, Down, Up). Then, rank the remaining substituents from highest priority, which corresponds to (choose: highest atomic number, longest chain, lowest atomic number, shortest chain), to lowest priority. If the substituents decrease priority in a (Choose: horizontal, counterclockwise, clockwish, vertical) order, the configuration is R. If the substituents decrease in priority in a (Choose: counterclockwise, Horizontal, Vertical, Clockwish) order, the configuration is S.
Answers
To determine whether a chirality center is in the R or S configuration, the spatial arrangement of each atom must be determined.
The structures are a non-superimposable mirror image stereochemical label that is used to indicate the relative spatial orientation of each atom in a molecule.
R indicates that a clockwise circular arrow going from higher priority to lower priority crosses over the lowest priority substituent, which is in the back. The R and S stereoisomers are non-superimposable mirror images, which means they do not become the same molecule when reflected on a mirror plane.
When you label a molecule as R or S, the chiral priorities of each substituents are considered.
Some general methods for determining priorities are:
The higher the atomic number of the directly attached atom, the higher the priority.If two substituents have the same first atom, the atomic number of the atom attached to the one is considered in step 1.If the overall substituents are too similar, a higher number of same-atom branches determines higher priority (e.g. isopropyl has higher priority than ethyl).Learn more about stereochemical label here:
https://brainly.com/question/13739466
#SPJ4
At 25°C, KP. = 2.9 x 10-3 for the reaction NH4OCONH2(s) ⇌ 2NH3(g) + CO2(g) In an experiment carried out at 25•c, a certain amount of NH4OCONH2 is placed in an evacuated rigid container and allowed to come to equilibrium. Calculate the total pressure in the container at equilibrium.
Answers
The total pressure of for the reaction NH4OCONH2(s) ⇌ 2NH3(g) + CO2(g) In an experiment carried out at 25•c, a certain amount of NH4OCONH2 in the container at equilibrium is
as Kp = [PNH3]2 [Pco2]
PNH3--> is the partial pressure of NH3 = P* XNH3
Pco2--> i is the parital pressure of co2 = P*Xco2
where p--> total pressure
XNH3=2/3,Xco2=1/3 --> are mole fractions of NH3 , CO2 respectively
2.9 *10^(-3)=[2/3 P]2 [1/3P]
P= [(27*2.9*10^(-3))/4](1/3)
=0.2695 atm
All pressures present in a reference system are added together to get the total pressure, or ptot. Bernoulli (see Fluid mechanics) defined this pressure as the sum of the static pressure (p), dynamic pressure (pdyn), and geodetic component (g, z) that exist in a fluid along a stream line in a frictionless flow.
Learn more about total pressure from here:
https://brainly.com/question/30255561
#SPJ4
name the following compound. group of answer choices 2,5-dibromobenzene 3,6-dibromobenzene 1,4-dibromobenzene 2,5-dibromocyclohexene 1,4-bromocyclohexene
Answers
Naming of the following compound is given below.
What is chemical compound?A chemical compound is a substance composed of two or more elements in a fixed ratio. Chemical compounds can be formed when atoms of two or more elements combine chemically. Examples of chemical compounds include water (H2O), table salt (NaCl), and carbon dioxide (CO2). Compounds are usually identified by their chemical formula, which describes the ratio of atoms present.
2,5-Dibromobenzene: A compound composed of six carbon atoms arranged in a ring structure, with two bromine atoms bonded to the two carbon atoms in the center of the ring.
3,6-Dibromobenzene: A compound composed of six carbon atoms arranged in a ring structure, with two bromine atoms bonded to the two carbon atoms at either end of the ring.
1,4-Dibromobenzene: A compound composed of six carbon atoms arranged in a ring structure, with two bromine atoms bonded to the two carbon atoms located adjacent to each other in the center of the ring.
2,5-Dibromocyclohexene: A compound composed of six carbon atoms arranged in a ring structure, with two bromine atoms bonded to the two carbon atoms located across from each other in the middle of the ring.
1,4-Bromocyclohexene: A compound composed of six carbon atoms arranged in a ring structure, with one bromine atom bonded to the two carbon atoms located adjacent to each other in the center of the ring.
To know more about chemical compound click-
https://brainly.com/question/26487468
#SPJ4
Which of the following chemical exposure factors relates to how a seemingly small exposure can be extremely toxic, even deadly?1. Route of exposure2. Toxicity, or lvel of harm posed by a chemical3. Hazard class4. How many pictograms are present on the label
Answers
(2) Toxicity, or level of harm posed by a chemical shows how a seemingly small exposure can be extremely toxic or even deadly.
Toxicity is a chemical property that describes a substance's ability to negatively disintegrate another chemical or biological environment. Any oxidizing agent that causes corrosion on a metallic surface acts as a toxin in relation to the substrate and environment.
Organic or inorganic substances called corrosion inhibitors are used to prevent corrosion on metallic surfaces by establishing a protective coating on the surface. These inhibitors or other chemicals (such coatings or solvents) used to cure or prevent corrosion may occasionally be released into the environment as waste products. They then cause pollution and have chemically unstable characteristics, which make them toxic to living things. These chemical compounds break down into various forms in water, air, and oil. When possible, less harmful corrosion inhibitors ought to be utilized.
Learn more about corrosion here:
https://brainly.com/question/30057568
#SPJ4
FILL IN THE BLANK Using the following general equation for a nuclear reaction, complete the statements below.
The atomic number for Uranium is____ .
The mass of the reactant neutron is___ .
The atomic mass for Krypton is ___ .
There are ___ Barium neutrons.
The number of neutrons this reaction emits is ___ .
Answers
The atomic number for Uranium is 92. The mass of the reactant neutron is 1.00 amu. The atomic mass for Krypton is 36. There are naturally 81 Barium neutrons. The number of neutrons this reaction emits is 3.
Since uranium atoms all have 92 protons, they all have the same atomic number.
The neuron has one neuronic mass (the mass of one neutron - hence the subscript 0 because this generally describes the number of protons present).
The mass number of an atom is the sum of its protons and neutrons in its nucleus. This mass number is usually demonstrated as a superscript on the element symbol.
To get the number of neutrons in an isotope, we have to subtract the mass number from the atomic number.
The number of neutrons emitted is 3 because the number in front of an element symbol in a reaction indicates the amount of that element in that reaction (in moles) (either in the reactants or products side).
Learn more about Mass number here:
https://brainly.com/question/4408975
#SPJ4
?BaF2 + ?K3PO4→ ?Ba3(PO4)2 + ?KF
How many grams of KF could be produced using 0.25 moles of BaF2?
____________g of KF
Answers
1. The balanced equation for the reaction is:
3BaF₂ + 2K₃PO₄ -> Ba₃(PO₄)₂ + 6KF
2. The mass of KF produced using 0.25 mole of BaF₂ is 29 grams
1. How do I write the balanced equation?The balancing of chemical equation is simply done by doing a head count of the different species and ensuring they are balanced on either sides of the equation.
Thus the balanced equation for the reaction is given as shown below:
3BaF₂ + 2K₃PO₄ -> Ba₃(PO₄)₂ + 6KF
2. How do I determine the mass of KF produced?First, we shall obtain the moles of KF produced. This is shown below:
3BaF₂ + 2K₃PO₄ -> Ba₃(PO₄)₂ + 6KF
From the balanced equation above,
3 moles of BaF₂ reacted to produce 6 moles of KF
Therefore,
0.25 mole of BaF₂ will react to produce = (0.25 × 6) / 3 = 0.5 mole of KF
Finally, we shall determine the mass of KF produced. Details below:
Mole of KF = 0.5 moleMolar mass of KF = 39 + 19 = 58 g/moleMass of KF =?Mole = mass / molar mass
0.5 = Mass of KF / 58
Cross multiply
Mass of KF = 0.5 × 58
Mass of KF = 29 grams
Thus, the mass of KF produced is 29 grams
Learn more about mass produced:
https://brainly.com/question/9526265
#SPJ1
does the frequency of the electromagnetic radiation released when excited electrons return to ground state rely on which orbits ?
Answers
Frequency of the electromagnetic radiation wavelength excited electrons return to ground state rely on which orbits.
What is meant by electromagnetic ?
The electromagnetic force that exists between electrically charged particles is the subject of the branch of physics known as electromagnetism.One of the four fundamental forces, the electromagnetic force, manifests electromagnetic fields like magnetic fields, electric fields, and light.Radio and television waves, microwaves, infrared rays, visible light, ultraviolet light, X-rays, and gamma rays are all examples of electromagnetic waves that propagate across space independently of matter.They are all referred to as electromagnetic radiation by scientists. Since the electric and magnetic fields are oscillating, the waves of energy are known as electromagnetic (EM). They are categorized by scientists based on their frequency or wavelength, from high frequency to low frequency.To learn more about electromagnetic refer to
https://brainly.com/question/25847009
#SPJ4
In chronic respiratory acidosis, the kidneys compensate by doing which of the following? You may select more than one answer. Choose all that apply. A) Excretion of bicarbonate B) Increased production of ammonia C) Secretion of H+ into renal tubular fluid
Answers
In chronic respiratory acidosis, the kidneys compensate by doing excretion of bicarbonate and increased production of ammonia.
What is bicarbonate?
Bicarbonate is a salt compound composed of sodium and bicarbonate ions. It is also known as baking soda or sodium bicarbonate and is widely used in a variety of applications. In the kitchen, it is used as a leavening agent in baking, and it is also used as a gentle cleaning agent for surfaces and cookware. Bicarbonate is also used in the production of soaps, detergents, and various other products. In the medical field, bicarbonate is used as an antacid to treat acid reflux and other digestive problems. It is also an important electrolyte and acid-base buffer in the body, helping to regulate the pH of the blood.
To learn more about bicarbonate
https://brainly.com/question/30095333
#SPJ4
How many significant figures are in each of the following measured quantities? Drag the appropriate items to their respective bins. Help B0 610 000 40C 5.0 x 10-L 15.70L 200686 One TWO Three Four Five So ws
Answers
4.0*10^(-3)L have 2SF, 3.004.0*10^(-3) L has two (SF), 3.00m has three, 50.100,000g has eight, 9018.17kg has six, 80.10 mL has four, and 60.4 degrees Celsius has three. Significant figures are used to construct the number that is provided as digits.
These digits carry a meaningful representation of the numerals. Figures are frequently replaced with meaningful numbers. We can find the number of significant digits by adding up all the values starting with the first non-zero digit on the left. For instance, 12.45 has four important digits. The significant figures of a number are the important or critical digits that correctly convey the meaning of that number. For instance, the number 6.658 has four significant digits. The statistics' precision comes from these enormous sums.
4.0*10^(-3)L have 2SF, 3.00m have 3SF, 50.100,000g have 8SF, 9018.17kg have 6SF, 80.10 mL have 4SF, 60.4degreeC have 3SF.
complete question:How many significant figures are in each of the following measured quantities?
Drag the appropriate items to their respective bins.
4.0*10^(-3)L, 3.00m, 50.100,000g, 9018.17kg ,80.10 mL ,60.4degreeC
1SF ,2SF ,3SF, 4SF, 5SF, 6SF, 8SF
learn more about significant figures refer:brainly.com/question/14359464
#SPJ4
Select, from the following dienophiles, all that would be more reactive than ethylene in a Diels-Alder reaction.
Answers
A, C, and D are dienophiles that would be more reactive than ethylene in a Diels-Alder process. Electron-drawing groups on the dienophile in general.
hasten Diels-Alder reactions (diene lover). Ethylene reacts slowly in a Diels-Alder reaction, whereas propenal, ethyl propenoate, and the other chemicals listed below are quite reactive. In the Diels-Alder reaction, a diene reacts with a pi bond (often referred to as a "dienophile") to generate a new six-membered ring. Two C-C sigma bonds and a C-C (pi) bond are formed, whereas three C-C pi bonds are broken. All of the following dienophiles are more reactive than ethylene in a Diels-Alder synthesis. A, C, and D are dienophiles that are more reactive than ethylene in a Diels-Alder reaction.
learn more about Diels-Alder here:
https://brainly.com/question/29972519
#SPJ4
The speed of light is 3.0 x 10^8 m/s. If the distance from Earth to the Sun is 1.5 x 10^8 km, how many minutes does it take for light from the Sun to reach the Earth?
minutes
Answers
Your calculations, which are rather precise, indicate that the sun is 500 light seconds away. Light travels thousands of miles roundtrip (not quite 17m). You receive 3.6 round trips each hour, or 74 daily.
Answer:
about 8.3 minutes to reach the Earth
Explanation:
Consider the reaction.
PCl5(g)↽−−⇀PCl3(g)+Cl2(g)=0.042
The concentrations of the products at equilibrium are [PCl3]=0.28 M and [Cl2]=0.10 M .
What is the concentration of the reactant, PCl5 , at equilibrium?
Answers
Answer:
0.067 M
Explanation:
The given equilibrium concentrations of the products are [PCl3]=0.28 M and [Cl2]=0.10 M.
Substitute these values into the expression for Kc to find the equilibrium concentration of the reactant, PCl5:
Kc = (0.28 M)(0.10 M) / [PCl5] = 0.042
Solving for [PCl5], you get:
[PCl5] = (0.28 M)(0.10 M) / 0.042 = 0.067 M
Therefore, the concentration of the reactant, PCl5, at equilibrium is 0.067 M.
A metal sample weighs 6.49 x 10-2 lb, is 0.925 in long, 0.0134 m wide, and 3.44 x 10-2 ft thick. The density of the metal is _______ g/cm3.
Answers
Density is an intensive property as it does not depend on the quantity of the substances Whereas mass and volume are extensive property. Therefore, the density of the metal is 6.905g/cm³.
What is density?Density tells about the compactness of the substances, how much dense is the substances in other words. Object that is more denser than water they just sink in the water.
Mathematically,
Density = Mass of the metal ball ÷volume marked on the graduated cylinder
mass =2943.8g
volume= length ×breadth ×height
=0.925×0.0134 ×0.0344
=0.00042m³
=426.3cm³
density= mass/ volume
=2943.8g/426.3cm³
=6.905g/cm³
Therefore, the density of the metal is 6.905g/cm³.
To know more about density, here:
https://brainly.com/question/16894337
#SPJ1
Assuming all other conditions remain the same, which of the following will cause an object's density to increase?A) Its mass increasesB) its volume increasesC) its atoms move togetherD) all of the above
Answers
Density of an object will increase if its mass is increases or if its atoms move together.
What is density?
Density is defined as the mass of an object per unit volume and is calculated by dividing the mass of the object by its volume.
So, if the mass of the object increases while the volume remains constant, the density will increase. This is because the mass per unit volume will be greater.
On the other hand, if the volume of the object increases while the mass remains constant, the density will decrease. This is because the mass per unit volume will be smaller.
Finally, if the atoms of the object move closer together, the volume of the object will decrease and therefore the density will increase.
Therefore, option A) Its mass increases and C) its atoms move together will cause an object's density to increase. Option B) its volume increases will cause density to decrease.
To learn more about density from the given link:
https://brainly.com/question/952755
#SPJ4
Give the coordination number and charge of the central metal ion of the complex cation and then, separately, the complex anion in the coordination compound [cr(nh3)6][cr(cn)6].Give a systematic name for the following formula: [cr(nh3)6][cr(cn)6]
Answers
The coordination number and charge of the central metal ion of the complex cation [Cr(NH3)6]3+ in the coordination compound [Cr(NH3)6][Cr(CN)6] is 6 and 3+ respectively.
The coordination compound [Cr(NH3)6][Cr(CN)6] is composed of two ions: the complex cation [Cr(NH3)6]3+ and the complex anion [Cr(CN)6]4-. The complex cation [Cr(NH3)6]3+ is formed by the central metal ion, chromium (Cr), and six ammonia (NH3) molecules. The coordination number of the central metal ion in this complex cation is 6, which means it has six ligands (NH3) surrounding it. The charge of the central metal ion in this complex cation is 3+, which means it has lost 3 electrons. The complex anion [Cr(CN)6]4- is formed by the central metal ion, chromium (Cr), and six cyanide (CN) molecules. The coordination number of the central metal ion in this complex anion is 6, which means it has six ligands (CN) surrounding it. The charge of the central metal ion in this complex anion is 4-, which means it has gained 4 electrons. The systematic name for the formula [Cr(NH3)6][Cr(CN)6] is hexaamminochromium(III) hexacyanochromate(IV).
learn more about cation here:
brainly.com/question/1333307
#SPJ4
Draw the organic product of the two-step synthesis below. CH3CH2C=CH 1. NaNH2 2. PhCH2Br
Answers
The organic product of the two-step synthesis below is CH3CH2CH2CH2Br.
Step 1: NaNH2 reacts with CH3CH2C=CH to form CH3CH2CH2NH2
Step 2: PhCH2Br reacts with CH3CH2CH2NH2 to form CH3CH2CH2CH2Br.
What is synthesis?
synthesis is the process of combining two or more chemical elements or compounds to form a more complex product. Syntheses can involve a variety of techniques, such as combining two or more different molecules, or using chemical reactions to create new ones. It is an important process in the formation of many products, including drugs and other materials.
Therefore, The organic product of the two-step synthesis below is CH3CH2CH2CH2Br.
To learn more about synthesis
Here: https://brainly.com/question/16281119
#SPJ4
What is the oxidation number of the manganese atom (Mn) in this compound?
MnO₂
+2
O +4
O4
Answers
The correct answer is B) +4. This is because the oxidation number of the manganese atom (Mn) in MnO₂ is +4.
What is oxidation number?The oxidation number of an atom is a number assigned to an element in a chemical compound that indicates the total number of electrons that an atom has lost or gained. Oxidation numbers are typically written with a plus or minus sign to indicate whether an atom has lost or gained electrons. Oxidation numbers can be used to determine the type of reaction taking place in a chemical reaction and the type of bonds formed. Oxidation numbers are also useful for recognizing the oxidation state of an element in a compound. The oxidation number of an atom in its elemental form is always zero.
This is because the oxidation number of oxygen (O) is always -2, and the oxidation number of the compound must add up to 0. Therefore, the oxidation number of Mn must be +4 in order for the compound to have an overall charge of 0.
To learn more about oxidation number
https://brainly.com/question/13182308
#SPJ1
Suppose you place 3.85 mL of a substance into a graduated cylinder. The graduated cylinder has a mass of 12.55 g when empty and a mass of 14.75 g after adding the substance.
What is the density of the substance (in g/mL)?
Type answer:
Answers
The density of the substance placed into the graduating cylinder is 0.571g/mL.
How to calculate density?Density is the measurement of the amount of mass per unit of volume. In order to calculate density, you need to know the mass and volume of the item. The formula for density is:
density = mass/volume
According to this question, 3.85 mL of a substance is placed into a graduated cylinder. The graduated cylinder has a mass of 12.55 g when empty and a mass of 14.75 g after adding the substance.
Mass of substance = 14.75g - 12.55g = 2.2g
Density of the substance = 2.2g ÷ 3.85mL = 0.571g/mL.
Therefore, 0.571g/mL is the density of the substance.
Learn more about density at: https://brainly.com/question/29775886
#SPJ1
3.3L of a gas is collected at 40 degrees c. What will its volume be if it is heated up to 57 degrees C
Answers
Considering the Charles' law, the volume if it is heated up to 57 degrees C will be 3.48 L.
Charles' lawCharles' law establishes the relationship between the volume and the temperature of a gas sample at constant pressure: when the temperature is increased, the volume of the gas also increases and when the temperature is decreased, the volume decreases.
That is, the volume is directly proportional to the temperature of the gas and is expressed mathematically as:
V÷T= k
where
V is the volume.T is the temperature.k is a constant.Analyzing an initial state 1 and a final state 2, it is fulfilled:
V₁÷T₁= V₂÷T₂
Final volume in this caseIn this case, you know:
V₁= 3.3 LT₁= 40 °C= 313 K (being 0 °C= 273 K)V₂= ?T₂= 57 °C= 330 KReplacing in Charles' Law:
3.3 L÷ 313 K= V₂÷ 330 K
Solving:
(3.3 L÷ 313 K)× 330 K= V₂
3.48 L= V₂
Finally, the final volume will be 3.48 L.
Learn more about Charles' Law:
brainly.com/question/4147359
#SPJ1
g compound a, c8h10, absorbed 3 equivalents of h2 on catalytic hydrogenation over a pd/c catalyst to give b (c8h16). on ozonolysis, compound a gave, among other things, a ketone which was identified as cyclopentanone. on treatment with nanh2 in nh3, followed by addition of iodomethane, compound a gave a new hydrocarbon, c (c9h12).
Answers
On catalytic hydrogenation, molecule A C8H10 absorbed three equivalents of H2, which indicates that it either possesses one double bond and one triple bonds or three double bonds.
Over a Pd/C catalyst, compound A, C8H10, underwent catalytic hydrogenation and absorbed three equivalents of H2 to generate compound B. (C8H16). Ozonolysis of compound A resulted in the production of many compounds, including the ketone cyclopentanone. Compound A was treated with NaNH2 in NH3, and then iodomethane was added, resulting in the production of a new hydrocarbon, C. (C9H12).
The given chemical A C8H10 has an unsaturation level of
[tex]DU= (Cn+1)-Hn/2 -Xn/2 +Nn/2[/tex]
[tex]DU = (8+1)-10/2[/tex]
[tex]DU = 4[/tex]
The given chemical thus either has four double bonds, four rings, or three double bonds and a ring.
To learn more about ozonolysis click here https://brainly.com/question/13580842
#SPJ4
complete question: Compound A, C8H10, absorbed 3 equivalents of H2 on catalytic hydrogenation over a Pd/C catalyst to give B (C8H16). On ozonolysis, compound A gave, among other things, a ketone which was identified as cyclopentanone. On treatment with NaNH2 in NH3, followed by addition of iodomethane, compound A gave a new hydrocarbon, C (C9H12). Draw the structure of Compound A and Compound B.
A closed sample of gas occupies 1.80 L at 212K. It is expanded to 2.70 L at constant pressure. What is it’s new temperature?
Answers
Using Charles's law, it’s new temperature is 318K.
According to Charles' law, with constant pressure, the volume of an ideal gas increases in direct proportion to the absolute temperature. The law also stipulates that when the pressure on a sample of a dry gas is held constant, the Kelvin temperature and the volume will be in direct proportion.
Charles' law states that, if the pressure is constant, the volume occupied by a fixed amount of gas is directly proportional to its absolute temperature.
According to Charles's law,
V1/T1 = V2/T2
Given,
V1 = 1.80L
V2 = 2.70L
T1 = 212k
T2 = ?
Putting above values in the formula,
⇒ 1.80 / 212 = 2.70 / T2
⇒ T2 = 318K
To learn more about Charles's law from given link
https://brainly.com/question/888898
#SPJ1
in question 19, we said intermolecular forces would cause pressure to be than predicted. is this observed in model 3?
Answers
Molecules should collide at a smaller volume, the pressure actually applied will be higher than that which was expected.
The phrase "intermolecular forces," or "IMF," refers to the attractive and repulsive forces that form between the molecules of a substance. Through the use of these forces, certain molecules of a substance communicate with one another. Most of the physical and chemical features of matter are caused by intermolecular forces. Pressure is created when gas molecules slam into the container's walls. The elastic bombardment of moving molecules on the walls is what causes this pressure, according to the kinetic theory of gases. Because molecules should collide at a smaller volume, the pressure actually applied will be higher than that which was expected.
Learn more about intermolecular forces from here:
https://brainly.com/question/9007693
#SPJ4
Select the equation that has the following mole ratio:
2:6:2:3
a
Li3PO4 + 3KCl → 3LiCl + K3PO4
b
NaOH + HCl → NaCl + H2O
c
Na2O + CaCl2 → 2NaCl + CaO
d
2Al + 6HCl → 2AlCl3 + 3H2
Answers
The chemical equation which has the given mole ratio is 2 Al + 6 HCl → 2 AlCl₃ + 3 H₂.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .
Learn more about chemical equation,here:
https://brainly.com/question/28294176
#SPJ1
ATP is produced in some of the steps of the glycolytic pathway. For the reactions shown, which produce ATP?
a. Phosphoenolpyruvate → pyruvate
b. 1,3-biphosphoglycerate → 3-phosphoglycerate
c. glyceraldehyde 3-phosphate → 1,3-bisphosphoglycerate
d. Phosphoenolpyruvate → glyceraldehyde 3-phosphate
Answers
The glycolytic process includes some phases where ATP is created. ATP is created from phosphoenolpyruvate.
b. 1,3-biphosphoglycerate → 3-phosphoglycerate - Produces 1 ATP
d. Phosphoenolpyruvate → glyceraldehyde 3-phosphate - Produces 1 ATP
During which steps of glycolysis is ATP produced?
The final product of glycolysis is pyruvate, which is then converted into energy and two ATPs (Glucose + two NAD+, two ADP, and two pi = two pyruvate, two NADH, two H+, two ATP, and two molecules of water). In order to phosphorylate, the hydroxyl groups are necessary.
Glycolysis uses glucose 6-phosphate as a particular type of glucose.
The glycolytic process includes some phases where ATP is created. ATP is created from phosphoenolpyruvate.
At the end of glycolysis, one glucose molecule produces four ATP molecules. There is a net gain of 2 ATP molecules as 2 ATP molecules are lost during the first stage of glycolysis. The creation of two NADH molecules occurs as a side effect of glycolysis.
To learn more about glycolytic process refer to:
brainly.com/question/1966268
#SPJ4
modify isoleucine to show its structure at ph 1 and ph 13. modify each amino acid by adding or removing atoms or bonds and by adding charges where appropriate.
Answers
Isoleucine is an amino acid that has the following structure at a pH of 1:
What is isoleucine?
Isoleucine is an essential amino acid, which means that the human body cannot produce it and it must be obtained through diet. Isoleucine is one of the 20 standard amino acids that are commonly found in proteins. It has a specific chemical structure of H3N-C(CH3)3-COOH. Isoleucine has an aliphatic side chain with a branched carbon skeleton.
H3N-C(CH3)3-COOH
At a pH of 1, isoleucine is in its acidic form, with a carboxyl group (-COOH) that is ionized and carries a negative charge. This ionization occurs when a hydrogen ion (H+) is removed from the carboxyl group, making it -COO-.
At a pH of 13, isoleucine is in its basic form, with a carboxyl group (-COOH) that is fully ionized and carries a negative charge. This ionization occurs when a hydrogen ion (H+) is removed from the carboxyl group, making it -COO-.
To show the structure of isoleucine at a pH of 1:
H3N-C(CH3)3-COO-
To show the structure of isoleucine at a pH of 13:
H3N-C(CH3)3-COO-
To learn more about isoleucine from the given link:
https://brainly.com/question/4518186
#SPJ4
A student calculates the time taken (in minutes) for the light from the sun to reach the Earth. e sun is 93 million miles away (1 mile 1.609 km) and the speed of light is 3.00 x 108 m/s. The calculation is set up as follows:8.3 min, since 9.3 x 10^7 has 2 significant figures 8.313, since 1.609 has 4 significant figures 8 min, since there is only 1 significant figure in 60 s 8.31 min, since 3.00 x 10° has 3 significant figurts
Answers
The 8.3 min, since 9.3*10^7 has two significant figures.
What is mass ?
A rough estimate of how much material is contained or makes up a physical body. The mass of an object affects its inertia and, subsequently, the force required to accelerate it according to classical mechanics, which is why Newton's equations of motion depend on mass.
What is speed ?
A change in position direction or speed for an object. How quickly anything moves depends on the distance traveled and the time required to cover that distance. Speed is a scalar quantity, having only a direction and no magnitude.
Therefore, 8.3 min, since 9.3*10^7 has two significant figures.
Learn more about mass from the given link.
https://brainly.in/question/790970#:~:text=Expert%2DVerified%20Answer,-45%20people%20found&text=Mass%20is%20the%20amount%20of,is%20(Mass%20*%20Acceleration)
#SPJ4
Consider the reaction shown.
4HCl(g)+O2(g)⟶2Cl2(g)+2H2O(g)
Calculate the number of grams of Cl2 formed when 0.460 mol HCl reacts with an excess of O2 .
Answers
Answer:
16.4 g of Cl2
Explanation:
4HCl(g) + O2(g) ⟶ 2Cl2(g) + 2H2O(g)
From the balanced equation, we know that for every 4 moles of HCl that react, 2 moles of Cl2 are formed. If we have 0.460 mol HCl, we can use the stoichiometry of the reaction to find the number of moles of Cl2 that will be formed.
0.460 mol HCl x (2 mol Cl2/4 mol HCl) = 0.230 mol Cl2
To find the number of grams of Cl2, we can use the molar mass of Cl2 (70.906 g/mol) and multiply it by the number of moles we just calculated.
0.230 mol Cl2 x 70.906 g/mol = 16.4 g Cl2
So, 0.460 mol HCl reacts with an excess of O2 to form 16.4 g of Cl2.
Which of the following is most likely to produce a spontaneous reaction?
A. Negative enthalpy
B. Positive enthalpy
C. Negative Entropy
D. Positive Entropy
E. Negative Enthalpy and positive Entropy
Answers
E. Negative Enthalpy and positive Entropy, A spontaneous reaction is most likely to occur when negative enthalpy and positive entropy are present.
A spontaneous reaction is one that favours the creation of products under the reaction's current circumstances. A blaze that is raging and exothermic is an illustration of a spontaneous reaction (there is a decrease in the energy of the system as energy is released to the surroundings as heat). An uninterrupted spontaneous reaction takes place under a certain set of circumstances. With the aid of outside factors like heat or energy, the non-spontaneous reaction occurs. Chemical or biological events that happen on their own, unaffected by extraneous forces or influences, are referred to as spontaneous reactions.
learn more about spontaneous reaction here:
https://brainly.com/question/13790391
#SPJ4
