which blu-ray standard defines rewritable disks?

Answers

Answer 1

The blu-ray standard that defines rewritable disks is BD-RE which stands for Blu-ray Disc Recordable.

What is BD-RE?

BD-RE stands for Blu-ray Disc Recordable and it refers to two direct to disc optical disc recording technologies that can be recorded on to a Blu-ray-based optical disc with an optical disc recorder.

Thus, the blu-ray standard that defines rewritable disks is BD-RE which stands for Blu-ray Disc Recordable.

Learn more about blu-ray here: https://brainly.com/question/16794951

#SPJ11


Related Questions

which degree is best for science student?​

Answers

Answer:

Computer Science or Science technology

Explanation:

It all depends on what aspect of science you're looking into such as biology, zoology, marine biology, etc. But since this world is evolving more and more around technology, your best bet is to get into something computer science or science technology.

Cancer and diabetes are two common hereditary diseases.

Answers

It is a true statement that cancer and diabetes are two common hereditary diseases.

What are hereditary diseases?

The term hereditary diseases are those diseases that occur in parents and could also be found in their offspring. For many of these hereditary diseases, the mechanism of inheritance is unclear.

However, it is a true statement that cancer and diabetes are two common hereditary diseases.

Missing parts:

Cancer and diabetes are two common hereditary diseases. A. True B. False.

Learn more about hereditary diseases:https://brainly.com/question/9367480?r

#SPJ1

a ball is thrown upward from the ground with an initial velocity of 50m/s. what is the total time spent by the ball in the air (g=10m/s2)​

Answers

Answer:

[tex]\fbox {5 seconds}[/tex]

Explanation:

The formula which is used here :

[tex]\fbox {v = u + at}[/tex]

[tex]\longrightarrow \textsf {v : final velocity}[/tex]

[tex]\longrightarrow \textsf {u : initial velocity}[/tex]

[tex]\longrightarrow \textsf {a : acceleration}[/tex]

[tex]\longrightarrow \textsf {t : time taken}[/tex]

Solving :

v = u + at

0 = 50 + (-10)t

10t = 50

t = 5 seconds

A 1.0-g string that is 0.64 m long is fixed at both ends and is under tension. This string produces a 100-Hz tone when it vibrates in the third harmonic. The speed of sound in air is 344 m/s. The tension in the string is closest to

Answers

The tension in the given string of 1.0 g and length of 0.64 m is closest to 2.84 N

Tension in the string

The tension in the string at nth harmonic is calculated as follows;

[tex]f_n = \frac{n}{2l} \sqrt{\frac{T}{\mu} }[/tex]

where;

n th harmonic = 3L is length of the string = 0.64 mμ is mass per unit length = (1 x 10⁻³ kg)/(0.64 m) = 0.00156 kg/mf is frequency = 100 HzT is tension in the string = ?

[tex]f_n = \frac{n}{2l} \sqrt{\frac{T}{\mu} }\\\\\frac{f_n(2l)}{n} = \sqrt{\frac{T}{\mu} }\\\\\frac{f_n^2(4l^2)}{n^2} = \frac{T}{\mu} \\\\T = \mu (\frac{f_n^2(4l^2)}{n^2})\\\\T = 0.00156(\frac{100^2 \times 4\times 0.64^2}{3^2} )\\\\T = 2.84 \ N[/tex]

Learn more about tension in string here: https://brainly.com/question/24994188

#SPJ1

A velocity-time graph can give you

A. Displacement of the moving object

B. Acceleration, displacement, and velocity.

C. Velocity of the moving object

D. Acceleration of the moving object

Answers

Answer:

A). Velocity time graph gives displacement..

The area under V-t graph gives displacement.

More to know -

Velocity = speed/ time

it's speed with direction.

acceleration = rate of change of velocity

A velocity-time graph provides information about the motion of an object over time Acceleration, displacement, and velocity. The correct option is option (B).

Acceleration: The slope of the velocity-time graph represents the object's acceleration. A positive slope indicates positive acceleration (speeding up), a negative slope indicates negative acceleration (slowing down or decelerating), and a flat line indicates zero acceleration (constant velocity).

Displacement: The area under the velocity-time graph represents the displacement of the object. By calculating the area between the graph and the time axis, we can determine the total displacement.

Velocity: The graph directly shows the object's velocity at different points in time. The vertical position of the graph at any given time represents the object's instantaneous velocity.

Therefore, a velocity-time graph can provide information about the acceleration, displacement, and velocity of the moving object. The correct option is option (B).

To know more about the velocity time graph:

https://brainly.com/question/33512397

#SPJ5

Nuclear power stations convert the nuclear energy stored in nuclear fuel into what other store of useful energy?

Answers

Answer:

The right answer is "thermal energy" or "thermal" or "heat" or "heat energy" or "electricity" or "electrical energy"

Explanation:

Nuclear fuel is used to heat water, increasing its thermal energy. This hot water is used to turn turbines that generate electrical energy.

Nuclear power stations convert the nuclear energy stored in nuclear fuel into thermal energy.

What is thermal energy?

Thermal energy is defined as a type of energy which is contained within a system which is responsible for temperature rise.Heat is a type of thermal energy.It is concerned with the first law of thermodynamics.

Thermal energy arises from friction and drag.It includes the internal energy or enthalpy of a body of matter and radiation.It is related to internal energy and heat .It arises when a substance whose molecules or atoms are vibrating faster.

These vibrating molecules and atoms collide and as a result of which heat is generated in a substance , more the collision of particles , higher is the thermal energy.It has 3 types conduction, convection and radiation.

Learn more about thermal energy,here:

https://brainly.com/question/11278589

#SPJ6

I finished all my other questions but i don't know how to do this one. could someone help me? I added a lot of points because I know this is pretty complicated.

Answers

Explanation:

hope it will help you understand, if you have any questions just let me know.

two point charges of magnitude 4.0 μc and -4.0 μc are situated along the x-axis at x1 = 2.0 m and x2 = -2.0 m, respectively. what is the electric potential at the origin of the xy-coordinate system?

Answers

The electric potential at the origin of the xy coordinate system is negative infinity

What is the electric field due to the 4.0 μC charge?

The electric field due to the 4.0 μC charge is E = kq/r² where

k = electric constant = 9.0 × 10 Nm²/C², q = 4.0 μC = 4.0 × 10 C and r = distance of charge from origin = x₁ - 0 = 2.0 m - 0 m = 2.0 m

What is the electric field due to the -4.0 μC charge?

The electric field due to the -4.0 μC charge is E = kq'/r² where

k = electric constant = 9.0 × 10 Nm²/C², q' = -4.0 μC = -4.0 × 10 C and r = distance of charge from origin = 0 - x₂ = 0 - (-2.0 m) = 0 m + 2.0 m = 2.0 m

Since both electric fields are equal in magnitude and directed along the negative x-axis, the net electric field at the origin is

E" = E + E'

= -2E

= -2kq/r²

What is the electric potential at the origin?

So, the electric potential at the origin is V = -∫₂⁰E".dr

= -∫₂⁰-2kq/r².dr

Since E and dr = dx are parallel and r = x, we have

= -∫₂⁰-2kqdxcos0/x²

= 2kq∫₂⁰dx/x²

= 2kq[-1/x]₂⁰

= -2kq[1/x]₂⁰

= -2kq[1/0 - 1/2]

= -2kq[∞ - 1/2]

= -2kq[∞]

= -∞

So, the electric potential at the origin of the xy coordinate system is negative infinity

Learn more about electric potential here:

https://brainly.com/question/26978411

#SPJ11

which of the following would increase​

Answers

Answer:

1 and 3

Explanation:

1 and 3  

Increasing coils increases strength

   COOLING the wire would increase current flow and strength of magnet

Adding an iron core will definitely increase the strength of the electromagnet

(1) Increasing the number of coils ()

which type of radio active decays​

Answers

Negative beta decay. So probably 4.

What is the final temperature of 0.1 kg of water initially at 22 *C after 10 kj of heat is added

Answers

The final temperature of the given mass of water at the initial temperature is 45.8 ⁰C.

Change in temperature of the water

The change in temperature of the water is calculated as follows;

Q  = mcΔθ

Δθ = Q/mc

where;

c is specific heat capacity = 4200 J/kgC

Δθ = (10,000)/(0.1 x 4200)

Δθ = 23.8

Final temperature

T2 - T1 = 23.8

T2 = 23.8 + 22

T2 = 45.8 ⁰C

Learn more about temperature here: https://brainly.com/question/25677592

#SPJ1

One exciting fairground ride acts like a giant catapult. The capsule which the ‘rider’ is strapped in is fired high into the sky by rubber straps. Explain the energy changes taking place on the ride.

Answers

Answer:

- elastic energy of rubber straps → KE of capsule 

- KE → GPE as capsule

Explanation:

draw suitable diagrams where necessary
1. describe an experiment for the measurement of specific heat capacity of a liquid by principle of mixtures

Answers

The experiment is described below in the explanation.

What is specific heat?

The specific heat is the amount of heat required to change the temperature by 1°C. It is denoted by C.

Heat lost or gained is represented as

Q = m C ΔT

In a calorimeter, a liquid is filled into the the cup with a temperature. A rod with high temperature is inserted into that liquid.

We use principle of  mixture by putting a heated rod in a liquid and then measuring the rise of temperature of liquid.

So, heat is lost by rod and gained by liquid and colorimeter.

Thus, experiment is described.

Learn more about specific heat.

https://brainly.com/question/11297584

#SPJ1

When you see a quantity like 20 m/s N, how do you know that it's a vector quantity and not a scalar quantity?

Answers

We know that 20 m/s N is a vector quantity because N in the expression signifies the direction

What is a vector quantity?

This is a which have both magnitude and direction. Example include:

VelocityDisplacementForceAccelerationMomentWeight

How to determine whether 20 m/s N is a vector quantity20 m/s indicates just the speed i.e magnitude20 m/s N indicates the speed i.e magnitude why the N indicates the direction.

Thus, we can conclude that 20 m/s N is a vector quantity because it has both magnitude and direction.

Learn more about scalar and vector quantity:

brainly.com/question/774036

#SPJ12

Which relationship gives the value of r when r3 is adjusted so that the voltmeter reading is zero?.

Answers

Ohm's Law is a formula used to calculate the relationship between voltage, current and resistance in an electrical circuit.

Equation :

To students of electronics, Ohm's Law (E = IR) is as fundamentally important as Einstein's Relativity equation (E = mc²) is to physicists.

E = I x R

When spelled out, it means voltage = current x resistance, or volts = amps x ohms, or V = A x Ω.

NOTE : Because resistance cannot be measured in an active circuit, Ohm's Law is particularly helpful when determining resistance. The aforementioned application of Ohm's Law allows a technician to calculate R without having to turn the circuit off to measure resistance.

To learn more about ohm law refer  : https://brainly.com/question/14296509

#SPJ4

Which of the following is an example of an electromagnetic wave?

Sound
Ocean waves
Seismic waves
Red light

Answers

Answer:

red light light is an electromagnetic wave thats whyy

hope it helped

Explanation:

Which action can humans take to reduce wave erosion?

build drainage systems
build houses near coastlines
build breakwaters in the ocean
reduce vegetation along coastlines

Answers

The action that  humans can take to reduce wave erosion is to build breakwaters in the ocean.

What is erosion?

The term erosion has to do with the washing away of top soil either by water or by wind. The control of erosion is a very important soil conservation effort.

Hence, the action that  humans can take to reduce wave erosion is to build breakwaters in the ocean.

Learn more about erosion:https://brainly.com/question/3852201?

#SPJ1

Answer: (C) build breakwaters in the ocean

Explanation: Got it on edge

Describe how a star is formed?
____________________________

Answers

a more in depth description:
as gasses like hydrogen start to gather, it creates more mass, therefore more gravitational attraction. As the gasses start to collect to considerably large amounts, the gas at the center of the mass starts to compress. As the gas keeps growing, the immense pressure on the core grows and grows, raising the temperature to extreme amounts. As this happens the star starts to undergo a process called nuclear fusion. this process occurs when immense pressure and heat cause the electrons to escape from their nuclei and flow around freely. this is what the fourth state of matter is. this type of matter is called plasma. this alone creates incredible amounts of heat and energy. The main part of the fusion process though is that the nuclei in which the electrons escaped from begin to merge, creating heavier nuclei, therefore creating heavier and denser nuclei. as the nuclei combine they also form denser elements, such as helium (fist merge of nuclei) all the way to eventually iron (last merge before nuclei is at its heaviest. This entire process takes billions of years to go from helium to the extremely dense iron, and stars usually only reach iron if they are big enough (a lot larger than our sun) so that the pressure will be able to keep fusing nuclei. if they dont reach iron, at the end of their life, the fuel from the inside will be used up and the core has to compensate for the gravitational force of the outer star pushing in. this means the star will grow as the outward force becomes greater than the gravitational force. the star will stay like this for a while before finally using up all the fuel and slowly dying off and shrinking. the shrinking star (or dying star) is known as a white dwarf

that is the long answer

Answer:

Star Formation

Stars are born within the clouds of dust and scattered throughout most galaxies. A familiar example of such as a dust cloud is the Orion Nebula. Turbulence deep within these clouds gives rise to knots with sufficient mass that the gas and dust can begin to collapse under its own gravitational attraction.

hy XD ~

a 5200w electric oven​

Answers

Answer:

104 kWh

Explanation:

To calculate the kWh you multiply power with the amount of hours.

So for this we take 5200 W × 20 = 104 000 Wh

Then change Wh to kWh so that makes 104 kWh

Where will the strongest force be excerted by the scissor blades to cut through a piece of material? Explain your answer.

Answers

Answer:

in the thick part of the scissors ✂️

Explanation:

because in physics simple machine called wedge the force applied in this thick area it have thine side used to split or piece objects

which statement illustrates how progress in engineering has affected the natural enironment

Answers

The statement that illustrates how progress in engineering has affected the natural environment is extracting mineral resources with modern mining equipment removes fertile topsoil.

What is the Natural Environment?

The natural environment may be defined as anything that can be present in the surroundings of living entities whether it is a biotic or abiotic factor.

The utilization of contemporary mining tools terminates fertile topsoil and admiringly impacts the fertility of the soil.  It is tough to rebuild topsoil and modern mining tools constantly damage soil fertility.

Advancement in engineering has influenced the natural environment and mining is one of the most accepted measures of this.

The complete question is as follows:

Extracting mineral resources with modern mining equipment removes fertile topsoil.Mining companies use modern equipment to extract mineral resources more efficiently.Modern mining equipment has improved the health and safety of workers.Modern mining practices provide materials that can be used for technological advances.

Therefore, it is well described above.

To learn more about the Natural environment, refer to the link:

https://brainly.com/question/1323947

#SPJ1

When the humerus moves in the glenoid fossa, the moving joint surfaces are:

Answers

When the humerus moves in the glenoid fossa, the moving joint surfaces are convex on concave.

What is Glenoid fossa?

This is a bone depression in which the head of the humerus fits into to aid movement and support.

The moving joint surfaces are convex on concave in structure when humerus moves in the glenoid fossa.

Read more about Humerus here https://brainly.com/question/7194643

#SPJ12

A girl at a state fair swings a ball in a vertical circle at the end of a string, the force of the string at the bottom is: A-Less than the weight of the ball B-greater than the weight of the ball C-equal to the weight of the ball D-Zero

Can someone pls answer this question with brief explanation?

Answers

The force of the string at the bottom is greater than the weight of the ball. The correct option is B.

What is Net force?

When two or more forces are acting on the system of objects, then the to attain equilibrium, net force must be zero.

A girl at a state fair swings a ball in a vertical circle at the end of a string.

When the ball is at the bottom . the force acting will be

The tension in the string , T = mass x centripetal acceleration + Force of gravity

So, T = m x ac + mg

Thus, the force of the string at the bottom is greater than the weight of the ball.

Learn more about net force.

https://brainly.com/question/18031889

#SPJ1

please who can give me the definition of density in terms of Archimedes principle.​

Answers

[tex]\large\bold{\underline{\underline{Answer:-}}}[/tex]

The weight of the fluid displaced is equal to the buoyant force on a submerged object. The mass divided by the volume thus determined gives a measure of the average density of the object.
The density, of a substance is its mass per unit volume. The symbol most often used for density is ρ, although the Latin letter D can also be used. Mathematically, density is defined as mass divided by volume: {\displaystyle \rho ={\frac {m}{V}}} where ρ is the density, m is the mass, and V is the volume.

Who is responsible of refraction light 1/3 in eye

Answers

The cornea is  responsible of refraction light 1/3 in eye.

What is the function of the cornea?

In addition to the protective function, it plays a fundamental role in the formation of vision. Transparent, it works like a lens over the iris, focusing light from the pupil towards the retina.

Normally, the cornea and lens deflect (refract) incoming light rays, focusing them on the retina. The shape of the cornea is fixed, but the lens changes shape to focus on objects at different distances from the eye.

See more about cornea at brainly.com/question/2297282

#SPJ12

force of 5000N is acting on a body of mass 50kg if force of friction on the body is 100N. Calculate how long it takes for the body to gain the velocity of 50m/s from rest​

Answers

Answer:

.5102 s

Explanation:

Net force acting to accelerate the body is 5000- 100 = 4900 N

F = ma

4900 N = 50 kg * a       then a = 98 m/s^2

v= at

50 m/s  =  98 m/s^2  t        then t =  50/98 =.5102 s

one of the rare galaxies that is isolated in space is likely to be a(n) ____.

Answers

The rarest type of galaxies is the elliptical double-ringed galaxy.

What is the rarest type of galaxy?

elliptical double-ringed galaxy is considered as the rarest type of galaxy because of its small number. The example of such type of galaxy is PGC 1000714. Scientists suggest that about 0.1% of galaxies are of this type.

So we can conclude that the rarest type of galaxies is the elliptical double-ringed galaxy.

Learn more about galaxy here: https://brainly.com/question/13956361

#SPJ11

write short notes on:
human made wetland​

Answers

Any type of wetland that has been developed or maintained by humans for uses such as aquaculture, irrigation, or water storage.

What is a human-made wetland​ ?

Any kind of wetland that has been created or kept up by people for purposes like water storage, irrigation, or aquaculture.

In India's Punjab state, in the Kapurthala district, lies the man-made Kanji Wetland, which includes the Kanji Lake.

In order to give irrigation facilities to the hinterland, it was built by building the headworks over the perennial Bien River, a tributary of the Beas River.

The Sunderbans are India's biggest wetland. The world's biggest mangrove forest includes Sunderban Wetland.

Hence, the human-made wetland​ is an artificial wetland.

To learn more about the human-made wetland​ refer;

https://brainly.com/question/1334452

#SPJ1

HELP PLEASE!!! In the diagram, q1 = -6.39*10^-9 C and q2 = +3.22*10^-9 C. What is the electric field at point P? Include a + or - sign to indicate the direction. 91 92 P 0.150 m ** 0.250 m (Hint: The distance from q1 to P is NOT 0.150 m.) (Remember, E points away from + charges, and toward charges.) (Unit = N/C) HELP PLEASE!!​

Answers

Answer:

E = K Q / R^2

E1 = K Q1 / R1^2 = K * (-6.39 E-9) / .4^2 = -K 39.9 E-9

E2 = K Q2 / R2^2 = K * 3.22 E-9 / .25^2 = K 51.5 E-9

Field will point to right of P since E2 (positive) stronger

E = K (E2 - E1) = 9.0 E9 * (51.5 - 39.9) E-9 = 104 N/C

The electric field at point P is 104.6 N/C.

What is meant by electric field ?

Every place in space where a charge exists in any form has an electric attribute that can be defined as the electric field.

Here,

q₁ = -6.39 x 10⁻⁹C

q₂ = 3.22 x 10⁻⁹C

Distance from q₁ to P, d₁ = 0.4 m

Distance from q₂ to P, d₂ = 0.25 m

Electric field at P due to q₁, E₁ = k x -6.39 x 10⁻⁹/(0.4)²

E₁ = -39.9 x 10⁻⁹k N/C

Electric field at P due to q₂, E₂ = k x 3.22 x 10⁻⁹/(0.25)²

E₂ =51.52 x 10⁻⁹k N/C

Therefore, total electric field at P,

E = E₂ - E₁

E = (51.52 - 39.9) x 10⁻⁹k

E = 104.6 N/C

Hence,

The electric field at point P is 104.6 N/C.

To learn more about electric field, click:

https://brainly.com/question/8971780

#SPJ5

what is the difference between an sa and an sb galaxy? (select all that apply.)

Answers

The difference between an sa and sb galaxy is Sa has a larger nucleus and more tightly wound arms than an Sb.

What is sa Galaxy?

Sa galaxies are normal spirals that have narrow, tightly wound arms, which usually are visible because of the presence of interstellar dust and, in many cases, bright stars.

What is sb Galaxy?

The arms of sb galaxy are more widely spread than those of the Sa variety and appear less smooth.

Thus, the difference between an sa and sb galaxy is Sa has a larger nucleus and more tightly wound arms than an Sb.

Learn more about sa galaxy here: https://brainly.com/question/9813915

#SPJ11

Other Questions
What is the equation of the line that passes through the point (6,-4) and has a slopeof-? A circle has a diameter with endpoints (-7, 1) and (-3, 7).What is the equation of the circle?r2 = ( x - 3) 2 + ( y + 4) 2r2 = ( x + 3) 2 + ( y - 4) 2r2 = ( x + 5) 2 + ( y - 4) 2r2 = ( x - 5) 2 + ( y + 4) 2 In which of the following scenarios are delivery and noise most likely the primary concerns of the speaker?a.Sheree has been asked to speak about social security to a mixed group of college students, business people, and senior citizens.b.Erin is giving a motivational speech to a very large group of high school students seated on bleachers in the schools gymnasium. c.Charles has been invited to Mrs. Delaneys classroom to speak to her elementary school children about fire safety. d.Ethan is giving a highly technical presentation on biomedical engineering involving several working models, computerized graphs, and video clips to a group of doctors, scientists, and engineers. In Walden, how is the excerpt from Spring mostly organized?It describes the order of events as winter turns to spring.It explains how the authors mood changes as spring arrives.It lists the benefits of the rebirth of nature in springtime.It compares the landscape in spring to the landscape in summer. Which would be a good use for an organic substance? Check all that apply. A. Electrical conductors B. Waterproof coatings C. Fuels such as gasoline D. Microchips E. Plastic storage containers A client with a spinal cord injury is diagnosed with neurogenic shock. What type of shock is this categorized as what's the central idea of the poem later life How does Homer identify Odysseus as the protagonist of the story? What oscar-winning film set in mexico shares its name with a variety of tomato?. During the nitrogen cycle, through which structure are nitrogen compounds first absorb into the plant?. A tiny red bird in a tree outside my window chirped while I practiced my flute solo for the winter concert.Which part of this sentence is a clause?"my flute solo""a tiny red bird""while I practiced""for the winter concert help me pls i dont understand it What is the first test you should do when checking the charging system? D. Have you ever been on a holiday trip or travelled to different places? Mention the hotspots, points of interest, etc. Share your experiences with your friends. D. Have you ever been on a holiday trip or travelled to different places ? Mention the hotspots , points of interest , etc. Share your experiences with your friends. Divide 140 in the ratio 2:5 Urgent algebra 2 help needed This year, druehl, inc. , will produce hot water heaters at its plant in delaware, in order to meet expected global demand. To accomplish this, each laborer at the plant will work hours per month. If the labor productivity at the plant is hot water heaters per labor hour, how many laborers are employed at the plant?. Is the point (11, 15) on the circle defined by (x-9) + (y-15) = 4?O YesO No In a group of 20 pupils, 3 play the flute only.6 play the piano only.6 play both instruments.A student is chosen at random.What is the probability the student plays neither instrument?Please answer in fractional form!! Select all that apply The four general accounting principles include: (Check all that apply). Multiple select question. going concern measurement expense recognition time period revenue recognition full disclosure business entity