The factor that does NOT influence the preferential discharge of an ion at the anode during electrolysis of an aqueous electrolyte is the strength of the electrolyte.
The correct option is B.
What is electrolysis?Electrolysis is a method used in chemistry and industry to force a chemical reaction that would not otherwise occur naturally. Commercially speaking, electrolysis is a crucial step in the electrolytic cell-based separation of elements from naturally existing sources like ores.
The factors that influence the preferential discharge of an ion at the anode during the electrolysis of an aqueous electrolyte are:
the position of an ion in the electrochemical seriesthe type of anodethe concentration of the electrolyteLearn more about electrolysis at: https://brainly.com/question/12994141
#SPJ1
Enter the chemical formula of a binary molecular compound of hydrogen and a Group 4A element that can reasonably be expected to be more acidic in aqueous solution than SiH4 , e.g. have a larger Ka .
The chemical formula for germanium hydride is GeH₄. Germanium hydride is a binary molecular compound of hydrogen and a Group 4A element, also known as a metalloid.
In an aqueous solution, germanium hydride can be expected to be more acidic than silicon hydride (SiH₄) due to differences in the elements' electron configurations.
Germanium has a higher electronegativity than silicon, which means that the electrons in the Ge-H bond will be pulled closer to the germanium atom, making the bond more polar.
This polar nature of the Ge-H bond makes it more likely to dissociate in water, leading to a higher acidity (larger Ka).
In conclusion, germanium hydride (GeH₄) is a binary molecular compound of hydrogen and a Group 4A element, known as a metalloid.
The higher electronegativity of Germanium compared to Silicon makes it more acidic in an aqueous solution. This acidity can be observed by its larger Ka ( acid dissociation constant) value.
Learn more about chemical formulas at
https://brainly.com/question/29031056
#SPJ4
A solution with 8.35 g of a non-electrolyte solute in 50.0 g naphthalene (Kfp = 6.90°C/m) freezes at 76.5°C. Pure naphthalene freezes at 81.0°C. What is the molar mass of the solute?
The molar mass of the solution is obtained as 257 g/mol.
What is the molar mass of the solute?We know that the molar mass of the solute is something that we can be able to obtain from the formula for the change in the temperature of the substance.
Thus;
ΔT = K m i
ΔT = temperature change
K = freezing constant
m = molality
i = Vant Hoff factor
Then we have;
ΔT = 81.0°C - 76.5°C = 4.5°C
Thus;
4.5°C = 6.90 * m * 1
m = 4.5/6.90
m = 0.65
Then;
m = mass/molar mass/ Mass of solution in kilograms
0.65 = 8.35/M * 1/50 * 10^-3
M = molar mass
0.65 * 50 * 10^-3 * M =8.35
M = 8.35/0.65 * 50 * 10^-3
M = 257 g/mol
Learn more about molar mass:https://brainly.com/question/22997914
#SPJ1
The ratio of a weak acid and its conjugate base at the point of maximum buffering capacity is a. 1/1 b. 1/10 c. 10/1 d. no definite ratio is needed
Option (a) is correct. The ratio of a weak acid and its conjugate base at the point of maximum buffering capacity is 1 : 1.
Weak acids are the acids which do not completely dissociate into their constituent ions when dissolved in solutions. It partially dissociates into its ions in an aqueous solution or water. Weak acids does not produce many hydrogen ions when it is in an aqueous solution. Conjugate base is said to be the particle that is left over after the acid loses its hydrogen ion. Conjugate bases are negatively charged and have high pH values. Conjugate base is produced when an acid loses a hydrogen ion.
According to Henderson-Hasselbalch Equation for the reaction is,
pH = PKa + log [base] / [acid]
At the point of maximum buffering capacity the concentrations of acid and base are equal. so, the logarithm of the concentrations of the acid and base is equal to 0. so the ration become 1:1.
To learn more about Henderson-Hasselbalch Equation please visit:
https://brainly.com/question/13423434
#SPJ4
Which of the following formulas for ionic compounds are written correctly?O Mg3(PO4)2 O CaCO3 O Na(OH) KSo4 O NaNO3
Option (a) is correct. Magnesium phosphate is an ionic compound having the formula [tex]Mg_{3} (PO_{4} )_{2}[/tex] .
The Ionic compounds are the type of chemical compound where the oppositely charged ions of a metal and a nonmetal are attracted to each other to form an ionic bond. The compound formed from the bonded ions have different properties from the elements that make up the compound. Ionic compounds containing basic ions hydroxide (OH−) or oxide (O2−). These are classified as bases. Ionic compounds can be formed by acid–base reactions. Ionic compounds can be produced from their constituent ions by evaporation of the solvent, precipitation, freezing and a solid-state reaction. It can form by the electron transfer reaction of reactive metals with reactive non-metals.
To learn more about Ionic compounds please visit:
https://brainly.com/question/977324
#SPJ4
When we buy artificial jewellery after sometime it looks worn off. Why so?
When we buy artificial jewelry after sometime it looks worn off because of the chemical reactions of the materials which are used in making the jewelry.
What is a Chemical reaction?This is referred to as the process in which one or more substances, the reactants, are converted to one or more different substances, the products under various types of conditions.
When artificial jewelry is made, it may be coated with a layer of plating, such as gold or silver, to give it a more attractive appearance which is therefore subject to various types of reactions when in contact with substance such as oil, sweat etc which us why it looks worn off after some time.
Read more about Chemical reaction here https://brainly.com/question/16416932
#SPJ1
Later in the course, we will compare the halogenation of differently substituted carbons, comparing reactions like the ones below. Which of the following statements is true about reactions I and II? O Neither reaction has a positive heat of reaction (AH) O Only reaction II has a positive heat of reaction (AH) O Only reaction I has a positive heat of reaction (AHº) O Both reactions have a positive heat of reaction (Hº)
The assertions regarding reactions I and II in the reactions connected below are correct; neither reaction has a positive heat of reaction .
A material can be halogenated chemically by adding one or more halogens to it. Because halide-containing substances are so prevalent, this kind of transformation is essential for creating polymers and medicines, among other things. In fact, this kind of conversion happens so frequently that it is hard to give a complete description. This article's main focus is on how elemental halogens are used in halogenation (F2, Cl2, Br2, I2). Halogen acids and halide salts are frequently used to introduce halides. For the purpose of adding halogens to a range of substrates, including thionyl chloride, there are a number of specialized reagents available.
complete question:Later in the course, we will compare the halogenation of differently substituted carbons, comparing reactions like the ones below.
Which of the following statements is true about reactions I and II?
A: Only reaction II has a positive heat of reaction
B: Neither reaction has a positive heat of reaction
C: Both reactions have a positive heat of reaction
D: Only reaction I has a positive heat of reaction
learn more about halogens Refer:brainly.com/question/24751735
#SPJ4
A
graduated
cylinder
contains
of
buffer
solution.
The
density
of
the
buffer
solution
is
.
What
is
the
mass
in
of
the
buffer
in
the
cylinder?
Answer:
Explanation:
To calculate the mass of the buffer solution in the graduated cylinder, you would need to know the volume of the buffer solution in the cylinder and the density of the buffer solution.
d = m/v
Given that the density of the buffer solution is and the volume of the buffer solution in the cylinder is, if you multiply the density by the volume, you will get the mass in grams of the buffer in the cylinder
It's not possible to give you an exact number without the density and volume of the buffer.
To practice solving percentage composition problems, a student made a series of circle graphsshowing the composition of a sample of carbon dioxide (CO2). Graph A is based on a sample that is 100% CO2. Graph B represents the mass fractions of a 100.0-g sample of CO2. Graph Crepresents the mass fractions of a 23.5-g sample of CO2.Which graph displays an incorrect composition relationship? A. Graph A B. Graph B C. Graph CD. All of the graphs are correctBased on the data shown in Graph C, how many atoms of carbon are there in a 23.5-g sample of CO2? F. 2.26 x 10^23 atoms G. 3.21 x 10^23 atoms H. 6.02 x 10^23 atomsJ. 1.18 x 10^24 atoms
The statement that the graphs of f and g are parallel and that the graph of f is translated 23 units down to create the graph of g is correct because the function f(x) = x was changed to form g(x) = f(x) -23.
The letter C is the response to your query. 2.906 x 1023 atoms Explanation: Data, Lead weighs 100 g. There are?number of atoms. Process: 1. Check the periodic chart for Lead's atomic number. Atomic weight is 207.2 g. 2.- To determine the number of atoms, use proportions and the Avogadro number. 207.2 g. 6,023,1023,023 atoms. 100 g. x = (100 x 6.023 x 10²³) / 207.2. x = 6.025 x 10²⁵ / 207.2. x equals 2.906 x 1023 atoms. Translation of a geometric figure in geometry involves adding a digit (11) to the value on the x-coordinate (x-axis) of the pre-image and subtracting a digit (8) from the value on the y-coordinate (y-axis) of the pre-image.
Learn more about Translation here:
https://brainly.com/question/29345544
#SPJ4
At a presentation for undergraduate students, a lecturer explained that even a small quantity of potassium metal can react explosively when exposed to water, igniting with purple flames and ricocheting wildly across the surface of the water. He showed the students a small demonstration of this reaction with a tiny fragment of potassium in a large beaker, and then explained, "While this reaction is fascinating to observe, none of you should attempt to recreate this effect outside of a controlled laboratory setting, as this reaction can be dangerous and difficult to control." Inspired by the presentation, a student broke into a lab on campus and stole a large quantity of potassium metal and put it in a lake on campus to simulate a fireworks display. The ensuing explosive reaction spread across the entire lake, causing massive property damage and injuring a professor who was feeding ducks by the lake. The professor can establish that but for the lecturer's demonstration, the student would never have thought to put the potassium in the lake. The applicable jurisdiction has adopted a pure several liability theory of recovery.
Assuming that the professor has a valid claim against the student for negligence, is the professor likely to prevail in an action against the lecturer?
Answers:
A. No, because the lecturer neither authorized nor encouraged the student's negligent conduct.
B. No, because the student was not an employee of the lecturer.
C. Yes, because the lecturer's demonstration gave the student this idea, making him a but-for cause of the professor's injuries.
D. Yes, but only for the lecturer's proportionate share of the professor's damages.
Duty, Breach, Cause, and Harm are the four components that a plaintiff must demonstrate in order to succeed in a negligence claim.
Which factors does a plaintiff need to prove in a negligence case in order to win? 1) Duty, 2) Breach, 3) Cause, and 4) Harm are the four components that a plaintiff must demonstrate in order to succeed in a negligence claim.In most civil injury lawsuits, the defendant is accused of negligence.A victim who sues for negligence must prove four things in order to prevail: (1) the offender owed the victim a duty; (2) the wrongdoer breached the obligation; (3) the violation resulted in the injury; and (4) the victim suffered damages.The plaintiff is required to show a cause-and-effect connection between the defendant's negligence and the harm before negligence law can hold the defendant accountable for the plaintiff's damages.So, the primary element of carelessness that establishes a connection between the defendant's wrongdoing and the plaintiff's harm is causation.To learn more about negligence case refer
https://brainly.com/question/25911081
#SPJ4
How many atoms of oxygen are in 2 Al(OH)3?
3
6
1
2
Answer: 3
Explanation: For every one aluminum ion, there are three hydroxide ions. Therefore, there are three atoms of oxygen and three atoms of hydrogen.
Answer:
6
Explanation:
there are two moles of Al(OH)3
each Al(OH)3 has three moles of oxygen
so in total 2 * 3 = 6
which of the following would be considered good practice for cleaning up large pieces of contaminated glass in a laboratory biohazard spill?
We would be considered the good practice for the cleaning up large pieces of the contaminated glass in laboratory biohazard spill is to wear the gloves.
The good practice for the cleaning of the large pieces of the contaminated glass in lab biohazard spill are :
1) To Wear gloves
2) To wear the Lab coat
3)To wear the Face protection
4) To Use a dust pan
5) Use the Tongs
These are practices that should be taken in a laboratory for cleaning of the large pieces of the contaminated glass in lab biohazard spill. These protection should be taken in the lab.
To learn more about biohazard spill here
https://brainly.com/question/28257541
#SPJ4
Which of the following accurately explains why along the same period, a non-metal has a smaller atomic radius than a metal?
A.Non-metals have an expanded octet
B. Non-metals have higher electronegativities
C. Non-metals have higher ionization energies
D. Non-metals have a higher effective nuclear charge
A non-metal has a smaller atomic radius than a metal along the same period because Non-metals have higher electronegativities.
What is metal?
Metal is an element that is widely used in many industries due to its ability to be molded and formed into a variety of shapes and sizes. It is a hard, dense, and durable material that is resistant to wear, corrosion, and extreme temperatures. Commonly used metals include iron, aluminum, copper, titanium, and steel. These metals have specific properties that make them ideal for use in a variety of applications. Iron is a strong metal used to make steel, which is used for construction and infrastructure. Aluminum is lighter than iron and is often used for objects that need to be moved frequently, such as aircraft and automobiles. Copper is an excellent conductor of electricity and is used in wiring and electronic components.
To learn more about metal
https://brainly.com/question/28183884
#SPJ4
An ad claims that a supplement helps a person lose weight, helps curb appetite to snack less, raises levels of serotonin to make a person feel less hungry, blocks new fat from forming, and increases metabolism to have more energy and burn existing fat. The manufacturer of the supplement published the data from the study of the product.
The study of the supplement used 100 subjects between the ages of 20 and 65. Of the 100 participants, 50 were male and 50 were female. Once the participants were selected for the study, each had the visceral fat measured. After all 100 participants were measured, it was determined that each had a measurement of more than 90 centimeters.
The testing subjects were divided into two groups. One group of 50 received the supplement and one group of 50 received a placebo. The study lasted for 16 weeks, but after 12 weeks, both groups were given the placebo.
After 16 weeks, men in both groups had a slight decrease in body weight. At the end of the study, the group receiving the supplement had reduced visceral fat when compared to the placebo.
After reading this data summary, what do you think? Answer the following questions in a post. Each question is worth 2 points.
Based on the testing data of the supplement, were any of the product's claims, proven correct? If so, identify the claims.
What data led you to that conclusion?
Which of the product's claims, if any, were not proven to be correct?
What type of testing data would you need to see in support of those claims to believe they were true?
When you see a product advertised on social media, how can you determine whether it is making reliable claims?
The claim that the supplement helps a person lose weight, helps curb appetite to snack less, raises levels of serotonin to make a person feel less hungry, blocks new fat from forming, and increases metabolism to have more energy and burn existing fat, were not proven to be correct in this study.
The data that led me to that conclusion is:
The data from the study showed that the supplement had no significant effect on weight loss, appetite, serotonin levels, new fat formation, and metabolism. The only claim that was proven to be correct was that the supplement reduced visceral fat when compared to the placebo.Which of the product's claims, if any, were not proven to be correct?All the claims made by the product, except reducing visceral fat, were not proven to be correct in this study.
The type of testing data would you need to see in support of those claims to believe they were true is:
I would need to see more data from a larger, randomized, double-blind, placebo-controlled study that would show that the supplement has a significant effect on weight loss, appetite, serotonin levels, new fat formation, and metabolism. This study should also have a longer duration, and measure a variety of other outcomes such as body composition, and hormone levels.When you see a product advertised on social media, you should be skeptical of the claims made by the product, especially if it seems too good to be true. Look for products that have been studied and the data is readily available, avoid products that make claims that seem too good to be true, and be wary of products that are marketed as "miracle cures" or that are marketed as cures for serious diseases or illnesses. Additionally, you can check if the product has been approved by the FDA and if it has any certifications or awards from reputable organizations.
Learn more about Data testing from
https://brainly.com/question/17399396
#SPJ1
C3H8 + 5O2 → 3CO2 + 4H2O
How many moles of H2O will be created if you burn 1.5 moles of C3H8?
a
6.0
b
0.375
c
0.75
d
2.5
According to the stoichiometry of the given chemical reaction, 2.5 moles of water will be created if you burn 1.5 moles of propane.
What is stoichiometry?It is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.
Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.
In the given reaction, 44 g of propane gives 72 g water, thus 1.5 moles will give 1.5×72/44=2.45≅2.5
Thus, 2.5 moles of water will be created if you burn 1.5 moles of propane.
Learn more about stoichiometry,here:
https://brainly.com/question/9743981
#SPJ1
) determine if the following compounds contain ionic or covalent bonds or both. [note: many of these molecules contain polyatomic ions. if so, indicate where the ionic and covalent bonds exist. for example, the molecule ammonium carbonate is an ionic compound, but it contains two polyatomic ions that are held together by covale
1. Ammonium Carbonate: Ionic, with two polyatomic ions held together by covalent bonds.2. Carbon Dioxide: Covalent,3. Sodium Chloride: Ionic,4. Magnesium Oxide: Ionic,5. Water: Covalent.
What is the Carbon Dioxide ?
Carbon Dioxide (CO2) is a colorless, odorless, non-flammable gas that is present in the Earth's atmosphere in trace amounts. In its natural form, it is produced by the natural breakdown of organic material. It is also a by-product of the burning of fossil fuels and other combustion processes. CO2 is an important part of the global carbon cycle, and plays a key role in regulating the Earth's climate. It is also used in a variety of industries, including the food and beverage industry, in the production of carbonated drinks, and in fire extinguishers. It is also used in greenhouses to increase the amount of carbon dioxide available for plant growth. In addition, it is used in carbon capture and storage technologies, where it is captured from the atmosphere and stored underground.
To learn more about Carbon Dioxide
https://brainly.com/question/25385913
#SPJ4
A student is demonstrated a transformation of kinetic and potential energy in a system using the pendulum shown below at which point is the system does the pendulum bob demonstrate minimum potential energy 
The potential energy of the pendulum can be modeled off of the basic equation PE = mgh.
How do you find the potential and kinetic energy of a pendulum?where h is the height and g is the acceleration brought on by gravity. This equation is frequently used to simulate items falling freely.The pendulum is not falling freely; instead, it is restrained by the rod or string.
As a result, we must express the height in terms of the angle and the pendulum's length L. Therefore, h = L(1 - COS) The formula for kinetic energy is KE= 12mv2, where m is the pendulum's mass and v is its speed. The pendulum is temporarily immobile when it is at its highest point (Point A).
There is no kinetic energy in the pendulum; all of its energy is gravitational potential energy. If friction and other non-conservative factors are ignored, we see that in a straightforward.
To learn more about potential and kinetic energy refer to :
https://brainly.com/question/18963960
#SPJ1
In an Experiment a fuel raised the temperature of 500g of water by 4 degree C.
a) work out the energy released in the experiment.( It takes 4.2J of energy to raise the temperature of 1g of water by 1 degree C)
Answer:
The energy released in the experiment is (500g)(4 degrees C)(4.2 J/g-degree C) = 8,400 J.
Explanation:
Consider the following reaction:
N2H4(g)+H2(g)→2NH3(g)
If the rate of decrease for the partial pressure of N2H4 in a closed reaction vessel is 78 torr/h, what is the rate of change for the partial pressure of NH3 in the same vessel? What is the rate of change of total pressure in the vessel during the reaction?
In the same vessel, the partial pressure of NH3 would change at a rate of change of 156 torr/h, which is twice as fast as the partial pressure of N2H4 did.
What is the rate of change for the partial pressure of NH3?Generally, The rate of change for the partial pressure of NH3 in the same vessel would be double the rate of decrease for the partial pressure of N2H4, or 156 torr/h.
The rate of change of total pressure in the vessel during the reaction can be calculated by adding the rate of decrease of N2H4 to the rate of increase of NH3.
Since the rate of decrease for N2H4 is 78 torr/h and the rate of increase for NH3 is 156 torr/h, the rate of change of total pressure in the vessel during the reaction would be
78 + 156 = 234 torr/h.
Read more about partial pressure
https://brainly.com/question/13199169
#SPJ1
Each group wants to have ______ in order to be ____
which means ______The goal is to be just like ________________
who already have ____________________
Each group wants to have "power" in order to be "influential" which means "able to shape and control events and decisions". The goal is to be just like "powerful and influential groups" who already have "a significant level of control and influence".
What is the statement about?The statement is saying that different groups or organizations want to have a certain level of power and influence in order to be able to shape and control events and decisions.
The goal for these groups is to be similar to other powerful and influential groups who already have a significant level of control and influence. This means that the groups want to be in a position where they can make important decisions and have a significant impact on their environment.
Therefore, this could include decisions that affect the group itself, or decisions that affect the broader society or community in which the group operates.
Learn more about power from
https://brainly.com/question/2248465
#SPJ1
Before a chemical equation can be used to conduct stoichiometric analysis, it must balanced. Type the balanced chemical equation for this reaction between solid sulfur and oxygen gas. Express your answer as a chemical equation including phases. View Available Hint(s) ΑΣΦ ? S(s) +0,(g)SO, (g) A chemical reaction does not occur for this question
The balanced chemical equation for this reaction between solid sulfur and oxygen gas is 2S(s) + O2(g) → 2SO2(g)
what is chemical equation?
The symbolic representation of a chemical reaction is a chemical equation.It shows the reactants (starting materials) on the left side and the products (resulting substances) on the right side. The substances reactants and products are represented by their chemical formulas. The arrow between the reactants and products represents the yield of the reaction. A chemical equation must be balanced, meaning that the number of each type of atom on each side of the equation must be equal. Balancing a chemical equation involves changing the number of atoms in the reactant and product side of the equation so that the number of each type of atom is the same on both sides. Chemical equations are used to describe and predict the outcome of a chemical reaction.
To learn more about chemical equation
https://brainly.com/question/19922941
#SPJ4
select the statements below that correctly describe where earth's three most abundant elements (iron, oxygen, and silica) are located.
The statements that describe where the earth's three most abundant elements that iron, oxygen, and silica are located are :
1) The majority of iron is located in the core.
2) Silica is abundant in the mantle and the crust.
3) The majority of oxygen is located in the crust and mantle.
1) The majority of iron is located in the core. The crust is estimated to have about 85% iron.
2) Silica is abundant in the mantle and the crust. Silica compounds are compounds that mainly found in the mantle and the crust.
3) The majority of oxygen is located in the crust and mantle. Oxygen is often called as atmospheric gas, it is found mainly on the crust, and oxygen is the second most abundant element on the earth.
To learn more about element here
https://brainly.com/question/6033100
#SPJ4
HELPPPPP IM GIVING 100 POINTSSSS!!!!!!!!!!
Answer: O Surface weathering removed material from the rock.
Explanation: Weathering and erosion can cause wear down in rocks, which could be why the rock matter changed over time. Rock matter cannot evaporate since it's not in a liquid state and can't shrink by humidity either. Gravity does have some play in the change of rock matter, but not by compressing the material.
Have a great day! :)
what pressure will be required to comprise 350cm³ of hydrogen at 700mmhg to 300cm³ provided the temperature remains constant
At a constant temperature of 700 mmHg, 882 mmHg of pressure is necessary to compress 350 cm3 of hydrogen to 300 cm3 of hydrogen.
Explain about the ideal gas law.In this query, the ideal gas law is utilized. According to the ideal gas law, the ratio of an ideal gas' pressure, volume, and temperature is given by the equation P1V1 = P2V2, where P1 and V1 stand for the gas' beginning pressure and volume and P2 and V2 represent the gas' final pressure and volume, respectively.
Determine how much pressure is different.
P2 - P1 = 0.0046828 kPa
Calculate the pressure difference in mmHg in step six.
A kPa equals 7.50062 mmHg.
In mmHg, 0.0046828 kPa is 0.3505
Increase the original pressure by the difference in pressure.
P1 plus 0.3505 mmHg equals 882 mmHg.
As a result, 882 mmHg of pressure is needed to compress 350 cm3 of hydrogen into 300 cm3 at a constant temperature of 700 mmHg.
To learn more about the ideal gas, visit
brainly.com/question/28257995
#SPJ1
true/false. the solvent is usually referred to as the component of a solution which is present as: (select all that apply.) one liter the larger quantity the smaller quantity the liquid which dissolves a solid
The solvent is usually referred to as the component of a solution the smaller quantity.
What is a solvent in chemistry?A solute can be dissolved by a solvent, which creates a solution. In addition to being a liquid, a supercritical fluid, a solid, or a gas can also be a solvent.Many reactions are made easier by solvents, which are substances that dissolve solutes and create solutions. They are utilised for a variety of tasks, including dry cleaning, painting, and extractions. They can be as hazardous as dichloromethane or as harmless as water.The solute is the thing that needs to dissolve, and the solvent is the thing that needs to dissolve it. With a wide variety of solutes and solvents, solutions can be created. We are aware of a wide range of solutions.Learn more about Solvent refer to ;
https://brainly.com/question/25326161
#SPJ4
classify each element correctly according to its general position on the periodic table. s s drop zone empty. cu cu drop zone empty. ca ca drop zone empty. si si drop zone empty. main-group metal metalloid nonmetal transition metal
According to the position of the molecule in periodic table, S is nonmetal: Cu and Ca are metal: and Si is a metalloid.
Calcium (Ca) is a metal since it is an element that forms positive ions and has metallic bonding.
Copper (Cu), a mineral and element, is a significant industrial metal due to its excellent ductility, malleability, thermal and electrical conductivity, and corrosion resistance.
Sulfur (S) is a member of the third period and family, which is the oxygen family (chalcogens family). Because the electrons are not free to flow, it is a bad conductor of heat and electricity. Sulfur lacks luster and forms sulfur dioxide, an acidic substance, when it interacts with oxygen, making it non-metallic.
Silicon (Si) is categorized as a metalloid because some of its properties are comparable to those of metals and others to those of nonmetals. For instance, silicon has a bluish-gray metallic luster and is considered to be a poor conductor of electricity.
learn more about periodic table here:
brainly.com/question/11155928
#SPJ4
The actual question is:
Sort each element into groups based on where it is located on the periodic table.
Element:
Ca, S, Si and Cu
properties:
Metal, Nonmetal and Metalloid
Identify the nucleophilic and electrophilic sites in the reactants of the following reaction. LI-Me
In the reaction LI-Me, the nucleophilic site is the lithium atom (Li) and the electrophilic site is the carbon atom in the methyl group (Me).
In general, lithium (Li) is a highly electropositive metal and acts as a strong nucleophile, meaning it has an excess of electrons and tends to donate them to an electrophile, which is a molecule or atom that has a deficit of electrons and tends to accept them. On the other hand, carbon atom in the methyl group (Me) is considered as a electrophile because it has a partial positive charge due to the presence of hydrogen atoms in its surrounding which causes it to accept electrons. The nucleophilic lithium atom attacks the electrophilic carbon atom in the methyl group, leading to the formation of a new chemical bond and the formation of a new compound.
Learn more about nucleophilic and electrophilic here:
https://brainly.com/question/24297177
#SPJ4
When a set of electrodes connected to a light bulb is placed in a solution of dextrose and a current is applied, the light bulb does not light up. When the same unit is placed inHCl, it does. Why?
Answer:
Dextrose being an organic compound consists of only molecules with covalent bonds, having no free ions to conduct electricity so the bulb doesn't glows. On the other hand, HCl being a polar covalent compound, in its aqueous solution dissociates into ions and the free ions are responsible for conduction of electricity so the bulb glows.
Which of the following descriptors best describes the stereoconfiguration of the molecule below? Z E cis trans
The following descriptors best describes the stereo configuration of the molecule below is the E configuration.
The cis / trans configuration are determine for the molecules which have the two similar substituents. But in this case all the four substituents attached to the double bonded carbon is deferent.
The E / Z configuration is determine by the whether the higher priority group on the each carbon is on the same side or the opposite side of the double bond. Since the high priority groups are on the opposite side, then the alkene has an E configuration.
Thus, the given molecule has the E configuration.
To learn more about E/Z here
https://brainly.com/question/26624086
#SPJ4
emergent behavior at the calcitewater interface during reactive transport in a simple microfluidic channel. true or false
False. Emergent behavior at the calcitewater interface is not typically observed during reactive transport in a simple microfluidic channel.
What is calcitewater interface?
Calcitewater interface is a type of interface between two different types of surfaces that are made of calcium carbonate, such as limestone and marble. The interface between these two materials provides an interface which is extremely resistant to erosion and is also highly effective at preventing water from passing through it. Calcitewater interfaces are commonly used in water treatment plants to protect the plant's equipment from erosion caused by the naturally acidic water. The interface works by reducing the alkalinity of the water, which helps to reduce corrosion and sedimentation, as well as reducing the amount of dissolved solids that are present in the water.
To learn more about calcium carbonate
https://brainly.com/question/29671908
#SPJ4
A glass vessel contains 32 g of oxygen gas. Assuming ideal behavior; which of the processes listed below would double the pressure exerted on the walls of the vessel? (Select all that apply:) A) Adding 28 g of oxygen gas. B) Raising the temperature of the container from -73 %C to 127 %C C) Adding 32 g of oxygen gas. D) Raising the temperature of the container from 30. %C to 60. "C. D) Adding enough mercury to fill one-half the container
Adding 28g and 32g of oxygen will double the amount of pressure exerted on the walls.
What is pressure?
Pressure is the force exerted per unit area on an object. In the context of gases, pressure is the force exerted by the collisions of gas molecules on the walls of a container. The pressure exerted by a gas on the walls of a container is directly proportional to the number of moles of gas present in the container and the temperature of the gas.
Option A: Adding 28 g of oxygen gas would increase the number of moles of gas present in the container by 28/32 g/mol = 0.875 moles, which will double the pressure exerted on the walls of the vessel.
Option B: Raising the temperature of the container from -73 %C to 127 %C will increase the kinetic energy of the gas molecules, causing them to collide more frequently and with greater force against the walls of the container. This will increase the pressure exerted on the walls of the container but it will not double the pressure.
Option C: Adding 32 g of oxygen gas would increase the number of moles of gas present in the container by 32/32 g/mol = 1 moles, which will double the pressure exerted on the walls of the vessel.
Option D: Raising the temperature of the container from 30. %C to 60. "C will increase the kinetic energy of the gas molecules, causing them to collide more frequently and with greater force against the walls of the container. This will increase the pressure exerted on the walls of the container but it will not double the pressure.
Option E: Adding enough mercury to fill one-half the container will not affect the pressure exerted by the oxygen gas on the walls of the container as mercury and oxygen are not interacting and don't affect each other pressure.
To learn more about pressure from the given link:
https://brainly.com/question/25736513
#SPJ4
