Answer:
I think it will carbon hope it helps
(10 points) A basement (with volume V) in a residence is found to be contaminated with radon coming from the ground through the floor drains. The concentration of radon in the room is [Co] under steady-state conditions. The room behaves as a CSTR, and the decay of radon is a firstorder reaction with a decay rate constant of [k]. a. Now the condition changes: The source of radon is closed off but there is no ventilation. What is the equation that describes the concentration of radon in the basement with time [Ct]
Answer:
[tex]\mathbf{C_{Out} = C_o \ exp \Big [ - \Big ( \dfrac{1}{\dfrac{V}{Q} } + k \Big) t \Big ] }[/tex]
Explanation:
The equation that describes the concentration of the radon in the basement with time Ct is;
[tex]\mathbf{C_{Out} = C_o \ exp \Big [ - \Big ( \dfrac{1}{\theta} + k \Big) t \Big ] }[/tex]
where;
[tex]C_o[/tex] = concentration of the radon
[tex]C _ {Out}[/tex] = allowable radon concentration
k = decay rate constant
= theoretical detention
t = time needed to lower the radon concentration
The theoretical detention [tex]\theta =\dfrac{V}{Q}[/tex]
∴
[tex]\mathbf{C_{Out} = C_o \ exp \Big [ - \Big ( \dfrac{1}{\dfrac{V}{Q} } + k \Big) t \Big ] }[/tex]
True/False: The definition of an ion is when the number of neutrons of an atom changes from the original neutral state.
Answer:
False. a ion is an atom or molecule with a net electric charge due to the loss or gain of one or more electrons.
Explanation:
Sam is pushing a large rock over the ground. ALL BUT ONE of the following terms relates to the movement of the rock. What term is it? A) force B) friction C) mass D) size
Answer:
C) Mass
Explanation:
A reaction mixture in a 5.19 L flask at a certain temperature contains 26.9 g CO and 2.34 g H2. At equilibrium, the flask contains 8.65 g CH3OH. Calculate the equilibrium constant (Kc) for the reaction at this temperature.
Answer:
26.7
Explanation:
The reaction that takes place is:
CO + 2H₂ ↔ CH₃OHWe convert the given masses to moles, using their respective molar masses:
CO ⇒ 26.9 g ÷ 28 g/mol = 0.961 molH₂ ⇒ 2.34 g ÷ 2 g/mol = 1.17 molCH₃OH ⇒ 8.65 g ÷ 32 g/mol = 0.270 molThe initial concentrations for each species are:
CO ⇒ 0.961 mol / 5.19 L = 0.185 MH₂ ⇒ 1.17 mol / 5.19 L = 0.225 MCH₃OH ⇒ 0While the equilibrium concentration for CH₃OH, [CH₃OH]eq is:
0.270 mol / 5.19 L = 0.052 MWe put the data in a table:
CO + 2H₂ ↔ CH₃OH
initial 0.185 0.225 ↔ 0
eq (0.185 - x) (0.225-2x) ↔ x
We know that x = 0.052 M (That's the equilibrium concentration of CH₃OH).
We proceed to calculate [CO]eq and [H₂]eq:
[CO]eq = 0.185 - 0.052 = 0.133 M[H₂]eq = 0.225 - 2*0.052 = 0.121 MFinally we calculate the equilibrium constant:
Kc = [tex]\frac{[CH_3OH]_{eq}}{[CO]_{eq}([H_2]_{eq})^2}[/tex] = 26.7The equilibrium constant (Kc) for the reaction at this temperature is 26.7
Chemical reaction:CO + 2H₂ ⇄ CH₃OH
Conversion of moles:CO ⇒ [tex]\frac{26.9 g}{28 g/mol} = 0.961 mol[/tex]
H₂ ⇒ [tex]\frac{2.34 g }{ 2 g/mol} =1.17 mol[/tex]
CH₃OH ⇒ [tex]\frac{8.65 g}{32 g/mol} = 0.270 mol[/tex]
The initial concentrations for each species are:CO ⇒ [tex]\frac{0.961 mol}{5.19 L} = 0.185 M[/tex]
H₂ ⇒ [tex]\frac{1.17 mol}{5.19 L } = 0.225 M[/tex]
CH₃OH ⇒ 0
While the equilibrium concentration for CH₃OH, [CH₃OH]eq is:[tex]\frac{0.270 mol}{ 5.19 L} = 0.052 M[/tex]
We put the data in a table:
CO + 2H₂ ⇄ CH₃OH
Initial 0.185 0.225 0
Equilibrium (0.185 - x) (0.225-2x) x
x = 0.052 M (That's the equilibrium concentration of CH₃OH).
We proceed to calculate [CO]eq and [H₂]eq:
[tex][CO]_{eq}= 0.185 - 0.052 = 0.133 M\\\\\\[H_2]_{eq} = 0.225 - 2*0.052 = 0.121 M[/tex]
Calculation of equilibrium constant:[tex]K_c =\frac{[CH_3OH]_{eq}}{[CO]_{eq}[H_2_{eq}]^2} = 26.7[/tex]
Thus, the equilibrium constant (Kc) for the reaction at this temperature is 26.7
Find more information about Equilibrium constant here:
brainly.com/question/12270624
1-bromobutane undergoes dehydrohalogenation by an elimination reaction when heated in the presence of base. what is the identity of the organic product
Answer:
1-butene
Explanation:
In this case, the problem is already stating and saying the reaction involved here.
1-bromobutane undergoes a dehydrohalogenation in presence of a base. This will cause an elimination reaction forming a product.
As this is an elimination product, this can be done in two ways.
The first way is with an unimolecular reaction where the halide is eliminated from the starting reactant in a two step reaction involving a carbocation formation. This is known as E1 reaction. However, the conditions for this reaction is to be in acid medium.
The second way is with a bimolecular reaction where the halide is eliminated from the starting reactant in just one step, and no carbocation is formed. This is known as E2 reaction and is commonly used with bases.
In the case of this problem, we are undergoing an E2 reaction, therefore, the mechanism of reaction is just one step, and when this happens, the base substract the hydrogen from Carbon 2, eliminates the bromide and forms a double bond, giving the 1-butene.
You can see the mechanism in the following picture.
Hope this helps
1-butene is the organic byproduct of 1-bromobutane's dehydrohalogenation in the presence of a base.
In the process of dehydrohalogenation, a molecule loses both a hydrogen and a halogen atom (such as a halogen from chlorine, bromine, or iodine) to create an unsaturated compound. The production of alkenes or alkynes, which are crucial in organic chemistry, is frequently accomplished using this reaction. Eliminating a hydrogen halide (HX) from a halogenoalkane or alkyl halide is the most important step in dehydrohalogenation. The E1 and E2 reactions are the two basic processes that can be used to do this. There are two steps in the E1 reaction. The halogenoalkane first passes through ionisation and creates a carbocation intermediate.
To know more about dehydrohalogenation, here:
https://brainly.com/question/31285083
#SPJ6
A pi bond involves: Select the correct answer below: direct orbital overlap with the electron density concentrated along the internuclear axis. side-by-side, or lateral orbital overlap with the electron density concentrated on opposite sides of the internuclear axis. side-by-side, or lateral orbital overlap with the electron density concentrated along the internuclear axis. none of the above
Answer:
side-by-side, or lateral orbital overlap with the electron density concentrated on opposite sides of the internuclear axis.
Explanation:
Pi bond is a type of covalent bond in which the internuclear axis has regions of orbital overlap below and above it i.e on opposite sides. As a result of the orbital overlap, a node is created along the internuclear axis.
This ultimately implies that, a pi bond is formed due to the lateral (side-by-side) overlap of the unhybridized P-orbital comprising of at least a node along the internuclear axis.
Hence, a pi bond involves side-by-side, or lateral orbital overlap with the electron density concentrated on opposite sides of the internuclear axis.
Additionally, a node is typically formed where an electron cannot be found.
Natural Phenomena that cause climate change
(Need at least 2)
Answer:
1. The Earth's orbit around the Sun is an ellipse, but it does change shape. ...
The tilt in the axis of the Earth is called its obliquity
Explanation:
2.Volcanic eruptions pump out clouds of dust and ash, which block out some sunlight.
How many grams of H2O are needed to produce 150 g of Mg(OH)2? (Molar mass: H2O = 18.02 g/mol; Mg(OH)2 = 58.33 g/mol )
Answer:
92.6
Explanation:
6 mol x 18.02 g of H2o --> 3 mol x 58.33 g Mg(OH)2
108.12 g of h2o --> 174.99 of Mg(OH)2
g of H2O is 150 g of Mg(OH)2
150g x 108.12g / 174.99 =
92.67
Pedro created the following table for his observations on balanced and unbalanced forces. He forgot to record some of the information. Which two measurements correctly complete the table?
A. 50 N in row one and 100 N in row two
B. 100 N in row one and 30 N in row two
C. 100 N in row one and 60 N in row two
D. 90 N in row one and 50 N in row two
Answer:
Option B. 100 N in row one and 30 N in row two
Explanation:
To know the the correct answer to the question, do the following:
For Row 1:
Force to the right (Fᵣ) = 100 N
Net force (Fₙ) = 0 (since it is balanced)
Force to the left (Fₗ) =?
Fₙ = Fᵣ – Fₗ
0 = 100 – Fₗ
Collect like terms
0 – 100 = – Fₗ
– 100 = – Fₗ
Multiply through by –1
Fₗ = 100 N
For Row 2:
For the net force to be unbalanced, it means that one of the force is greater or lesser than the other.
In the question given above, the force to the left is given as 50 N and it show it is greater than the force to be right. The other force must be lesser than 50 N to result in unbalanced force according to the illustration from the question.
From the options given above, option B has a lesser force (i.e 30 N) for row 2 compared to option C which has a greater force (60 N) for row 2.
Therefore, option B gives the correct answer to the question.
How many atoms are in 2.12 mole of propane
Answer:
More exactly this number is 6.02 x 1023 10 2 3 .
why do you think coal and petroleum are diffrent
Answer:
those both are fossil fuel but coal is used for electricity,Petroleum is used for bikes
How to Balance __MgF2 + __Li2CO3 + __ LiF
Would you consider an aquifer a renewable resource? Why or why not?
Answer:
an aquifer is a renewable resource
Explanation:
Aquifers are defined as the groundwater found deep in the layers of rocks.
An aquifer is considered as a renewable resource because groundwater is renewed over time. Aquifers are water resources and follow hydrological cycle through which it can renew itself.
Some of the deep aquifers are considered as nonrenewable resource because it toll hundreds of years to accumulate.
Hence, the correct answer is yes an aquifer is a renewable resource except some deep aquifers.
How many carbon dioxide molecules should be added to the products side to obey the law of conservation of matter?
Your answer:
A.four
B.One
C.three
D.two
Answer:
four A
Explanation:
Answer: B) One
Explanation: One carbon dioxide molecule should be added to the products side to balance the equation and obey the law of conservation of matter.
Also, just took the test. One is correct.
14.86 ml + 15.0 ml + 14.980 ml =
Answer:
44.84 ml
Explanation:
14.86
+
15.0
+
14.980
_______
44.84
If a substance has a large mass and a small volume how dense is it
Answer:
Very dense.
Explanation:
Conceptually, you are taking a large amount of atoms and putting them into a small container. This means the spaces between atoms has to be smaller and the substance is more dense. (see image)
Mathematically, the equation for density is mass divided by volume ([tex]Density=\frac{m}{v}[/tex] ). If you divide a big number by a small number, you still have a pretty big number (ex 4/2=2 versus 6/1=6)
How does the appearance of a substance change when it
changes phase?
Answer:
Melting: the substance changes back from the solid to the liquid. Condensation: the substance changes from a gas to a liquid. Vaporization: the substance changes from a liquid to a gas. Sublimation: the substance changes directly from a solid to a gas without going through the liquid phase.
Explanation:
The change in appearance of a substance when it changes its phase includes :
Change in volume Change in texture and Change in shapeChange in volume : when a liquid substance is heated to its boiling point ( vaporization) the volume of the liquid substance will change when it turns into gas because gases have no definite volume or shape.
Change in Texture: When water freezes it changes its state from a liquid state to a solid state, also the appearance of the liquid water will undergo changes in its texture when it is in its' solid state ( i.e. the texture of ice is not exactly the texture of liquid water )
Change in shape : when a solid substance changes its state from solid to gas ( sublimation ) the shape of the solid substance will be lost during the phase change.
Hence we can conclude that the change in the appearance of a substance when it changes its phase include. Change in volume, Change in texture and Change in shape.
Learn more : https://brainly.com/question/16785581
Physical or Chemical change?
Answer: Chemical Change
Explanation:
because it probably doesnt change the physical anatomy of the object only the atoms/ molecule relations
Help pls!!!!!!!!!!!!!!!!!!!
Answer:
water
Explanation:
water is made up of both hydrogen and oxygen (h2o)
Which of the following is an example of a mixture and not a compound?
O Water
O Salt
O Lemonade
O Carbon Dioxide
Which refers to any disturbance that carries energy from one place to another?
Answer:
A wave
Explanation:
A wave is a disturbance that carries energy from one place to another. Matter is not carried with the wave but instead a wave can move through matter.
Answer:
A Wave
Explanation:
Ok so I don't understand how to do this-
Can someone explain how?
Shanghai, China (31° N, 121° E)
1. 24-hr Average Yearly Temperature in ºC
2. Total Yearly Precipitation in mm
Answer:
Oh, you are supposed to look up the yearly temp, and yearly rain for a certain area. I did this before!
Draw all four products obtained when 2-ethyl-3-methyl-1,3-cyclohexadiene is treated with HBr at room temperature and show the mechanism of their formation. For the mechanism, include lone pairs and charges in your answer. Do not draw out any hydrogen explicitly. Do not use abbreviations such as Me or Ph.
Answer:
See explanation below
Explanation:
In this case we have reaction of addition. In this case a diene reacting with an acid as HBr. This reaction is known as Hydrohalogenation, and, as we have a diene, this kind of reaction can be done as 1,4 addition. Which means that the reaction will be undergoing with an adition in the carbon 1, and carbon 4.
At room temperature we can expect that this reaction can be done in thermodynamic conditions, Now, as the problem states that is forming 4 products, we can expect products of a 1,2 addition too. This product can be formed if the reaction is taking place in the most stable carbocation, and then, by resonance, we can expect the 1,4 product too.
Now, the HBr can be attacked by the double bond of the first position, giving two possible products or by the double bond of the third position giving the other two products. These products are all possible, obviously the most stable will be the major of all of them, but the other three are perfectly possible. One product is formed without doing much, and the other by resonance. Same happens with the other double bond.
In the picture below, you have the mechanism for all the 4 products.
Hope this helps
2021 by Mrs. Groves Closes at 2/9/2021, 12
Which layer of Earth is divided into plates?
Mantle
Crust
Inner core
Outer core
Answer:
It would be the Mantle,I believe
Which best describes a hydrate?
A.) It has water molecules bonded directly to it.
B.) It lacks water molecules ik it’s crystal lattice.
C.) It lacks hydrogen and oxygen atoms, which make up water.
D.) It has water molecules incorporated into its crystal lattice.
help me please i do not understand
Answer:
1 g/cm3
Explanation:
The formula for density is mass/volume
The mass is 100 g and the volume is 100 cm3
100 g/100 cm3=1 g/cm3
How many moles of nitrogen are in 100.0 grams of barium nitrate?
Answer:
Hope this help you
Explanation:
The answer is 261.3368. We assume you are converting between grams Barium Nitrate and mole. You can view more details on each measurement unit: molecular weight of Barium Nitrate or mol The molecular formula for Barium Nitrate is Ba(NO3)2.
Answer:
0.382
Explanation:
Alright
Ooh, yeah
I'll admit, I was wrong, what else can I say, girl?
Can't you blame my head and not my heart?
I was drunk, I was gone, that don't make it right, but
I promise there were no feelings involved, mmh
She said, "Boy, tell me honestly
Was it real or just for show?", yeah
She said, "Save your apologies
Baby, I just gotta know"
How long has this been goin' on?
You been creepin' 'round on me
While you're callin' me "baby"
How long has this been goin' on?
You've been actin' so shady (shady)
I've been feelin' it lately, baby
Ooo-oh (yeah)
Ooo-oh (encore)
Oooh-ooh-oh
NEVER GONNA GIVE YOU UP,
NEVER GONNA LET YOU DOWN,
NEVER GONNA RUN AROUND AND DESERT YOU!
NEVER GONNA MAKE YOU CRY,
NEVER GONNA SAY GOODBYE..
Answer:
How long By Charlie Puth
The photograph shows one of the boats in a science club's toy boat race. All the boats were powered by identical
rubber bands. Judges used stopwatches to time how long each rubber band took to unwind. The table shows some
of the data the judges collected.
Boat
Time
(5)
Acceleration
(m/s)
N
1.6
1.4
1.1
Mass of
Boat (kg)
0.125
0.116
0.130
0.118
P
Penywise/Dreamstime.co
Q
1.5
1.2
2.1
1.0
1.8
R
Which boat experienced the greatest unbalanced force?
Answer:
Boat p
Explanation:
Answer:
boat p
Explanation:
Give the formula of the alkanes his molecule contains 28 hydrogen atoms
Answer:
jayfeather friend me
Explanation:
Table 1. Summary of the Straight-Chain Alkanes
Name Formula Number of Structural Isomers
Octadecane C18H38
Nonadecane C19H40
Eicosane C20H42 366,319 (!)
29 more rows
The formula of the alkanes the molecule contains 28 hydrogen atoms is [tex]C_1_3H_2_8[/tex], i.e., tridecane.
What are alkanes?Alkanes are organic compounds made up entirely of single-bonded carbon and hydrogen atoms with no other functional groups.
Alkanes have the general formula CnH2n+2 and are classified into three types: linear straight-chain alkanes, branched alkanes, and cycloalkanes.
Alkanes are important raw materials in the chemical industry and the main component of gasoline and lubricants.
Natural gas is primarily composed of methane and ethane and is used for heating, cooking, and power generation (gas turbines).
Natural gas and petroleum are separated from the alkanes. Natural gas is primarily composed of methane, with trace amounts of other low molecular weight alkanes.
All other alkanes are derived from petroleum, which is a complex mixture of many compounds.
Here, the formula for 28 hydrogen atom containing alkane is
[tex]C_1_3H_2_8[/tex]
Thus, this given formula is of tridecane.
For more details regarding alkanes, visit:
https://brainly.com/question/4260635
#SPJ2
