From the given decimals which are 0.2, 0.019, 0.12, 0.02, the smallest number is 0.019.
To compare the given decimals, we need to look at the digits to the right of the decimal point. Starting from the left, the first decimal is 0.2, which has one decimal place. The second decimal is 0.019, which has three decimal places. The third decimal is 0.12, which has two decimal places. Finally, the fourth decimal is 0.02, which has two decimal places.
To compare them, we can line them up vertically by decimal place and see which one has the smallest value in the first decimal place. In this case, the smallest value in the first decimal place is 0.019. Therefore, 0.019 is the smallest decimal among the given options.
In summary, the decimals listed from smallest to largest are: 0.019, 0.02, 0.12, 0.2.
To learn more about smallest measurement click on,
https://brainly.com/question/3504441
#SPJ1
if all multiples of $4$ and all multiples of $5$ are removed from the set of integers from $1$ through $100$, how many integers remain?
The number of integers that remain is $100 - 40 = \boxed{60}$.
To solve this problem, we need to find the set of integers that are not multiples of either $4$ or $5$ within the range from $1$ through $100$. We can do this by using the principle of inclusion-exclusion.
First, we find the number of integers that are multiples of $4$ within the range from $1$ through $100$. We can do this by dividing $100$ by $4$ and rounding down to the nearest whole number. This gives us $25$ multiples of $4$.
Next, we find the number of integers that are multiples of $5$ within the range from $1$ through $100$. We can do this by dividing $100$ by $5$ and rounding down to the nearest whole number. This gives us $20$ multiples of $5$.
However, we have double-counted the integers that are multiples of both $4$ and $5$ (i.e. the multiples of $20$). There are $5$ multiples of $20$ within the range from $1$ through $100$.
So, the total number of integers that are multiples of either $4$ or $5$ within the range from $1$ through $100$ is $25 + 20 - 5 = 40$.
Therefore, the number of integers that remain is $100 - 40 = \boxed{60}$.
To know more about integers,visit:
https://brainly.com/question/29736390
#SPJ11
a poll of $100$ eighth-grade students was conducted to determine the number of students who had a dog, a cat or a fish. the data showed that $50$ students had a dog, $40$ students had a cat, and $20$ students had a fish. further, $19$ students had only a dog and cat, $2$ students had only a cat and a fish, $3$ students had only a dog and a fish, and $12$ students had only a fish. how many students had none of these pets?
14 students had none of the pets mentioned in the problem.
Given Question is related to Sets and Function
By using the principle of inclusion-exclusion,
D = set of students who had a dog
C = set of students who had a cat
F = set of students who had a fish
Let's determine the sizes of the sets and their intersections:
|D| = 50
|C| = 40
|F| = 20
|D ∩ C| = 19
|C ∩ F| = 2
|D ∩ F| = 3
|D ∩ C ∩ F| = 0
|D ∪ C ∪ F| = ?
The size of the union of the sets as follows:
|D ∪ C ∪F| = |D| + |C| + |F| - |D ∩ C| - |C ∩ F| - |D ∩ F| + |D ∩ C ∩ F|
|D ∪ C ∪ F| = 50 + 40 + 20 - 19 - 2 - 3 + 0 = 86
Therefore, there were 86 students who had at least one of these pets.
To find the number of students who had none of these pets, we can subtract this number from the total number of students:
100 - 86 = 14
Therefore, 14 students had none of the pets mentioned in the problem.
To know more about Sets and Function here
https://brainly.com/question/31249554
#SPJ4
interpret this bound. with 95% confidence, we can say that the value of the true mean proportional limit stress of all such joints is centered around this value. with 95% confidence, we can say that the value of the true mean proportional limit stress of all such joints is greater than this value. with 95% confidence, we can say that the value of the true mean proportional limit stress of all such joints is less than this value. what, if any, assumptions did you make about the distribution of proportional limit stress? we must assume that the sample observations were taken from a normally distributed population. we do not need to make any assumptions. we must assume that the sample observations were taken from a chi-square distributed population. we must assume that the sample observations were taken from a uniformly distributed population.
The answer is that with 95% confidence, we can say that the value of the true mean proportional limit stress of all such joints is centered around a certain value. This means that we are fairly certain that the true value lies within a certain range.
This bound is based on statistical analysis and assumes that the sample observations were taken from a normally distributed population. This means that the data follows a bell curve shape, with most of the values falling near the mean and fewer values falling farther away from the mean. The 95% confidence level means that if we were to repeat the experiment multiple times, we would expect the true value to lie within this range 95% of the time.
We cannot say for certain whether the true mean proportional limit stress is greater or less than the value we have calculated, but we can say that it is centered around this value with a high degree of confidence.
It is important to note that this bound is based on certain assumptions about the data and the population it represents. If these assumptions are not met, the bound may not be accurate or valid.
To know more about statistical analysis visit:
brainly.com/question/30154483
#SPJ11
(Q1) Given: ∠MNO;∠MNP≅∠ONP;MP=2 inWhat is the length of OP ?By which Theorem?
The length of OP is √(3) and the Pythagorean Theorem is used to find it.
What is Theorem?
A theorem is a statement that has been proven to be true based on rigorous mathematical reasoning and evidence. It is a fundamental concept in mathematics and plays a central role in building the structure of mathematical knowledge. Theorems are often used as a basis for further mathematical analysis and the development of new theories and applications.
The length of OP can be found using the Pythagorean Theorem.
By the Pythagorean Theorem, we know that:
MN² + NO² = MO²
Since angle MNP is congruent to angle ONP, we know that triangles MNP and ONP are similar. Therefore, we can set up a proportion:
MN/NP = ON/NP
Simplifying this proportion, we get:
MN = ON
Substituting this into the equation for MO², we get:
MN² + NO² = MO²
2(MN² ) = MO²
Since MP is given as 2, we can use the Pythagorean Theorem in triangle MOP to find OP:
MO² = MP² + OP²
2(MN²) = MP² + OP²
2(MN²) - MP² = OP²
2(2²) - 1² = OP²
3 = OP²
OP = √3
Therefore,
The length of OP is √(3) and the Pythagorean Theorem is used to find it.
To know more about Theorem visit:
https://brainly.com/question/343682
#SPJ4
(Q2) For all expressions a,b, and c,if a0, then a/cb/c.
Based on your question, you are asking about the property of expressions a, b, and c, where a ≠ 0. If a ≠ 0, then a/c = b/c. This property states that if you divide two equal expressions by the same nonzero value, the resulting expressions are still equal.
If a is greater than 0, then a/c is also greater than 0 because c is positive. Similarly, b/c is also positive because both b and c are positive. Therefore, a/c is greater than b/c, which can be written as a/c > b/c.
Based on your question, you are asking about the property of expressions a, b, and c, where a ≠ 0. If a ≠ 0, then a/c = b/c. This property states that if you divide two equal expressions by the same nonzero value, the resulting expressions are still equal.
Visit here to learn more about expressions : https://brainly.com/question/14083225
#SPJ11
i need help on this translation stuff
The translated shape would have the vertices of :
U' = (3, 5)S' = (0, 1)T' = (0, 4)How to translate ?Geometry employs translation to move a figure from a certain location to another while retaining its shape, size, and orientation. All points on the initial object are shifted equidistant in a unified direction. A vector showcases the magnitude and course of the movement.
The vectors of the original shape are:
U ( - 2 , 0 )
S ( -5 , - 4 )
T ( - 5, - 1 )
The translated vectors would be:
U' ( - 2 + 5, 0 + 5) = (3, 5)
S' ( -5 + 5, -4 + 5) = (0, 1)
T' ( -5 + 5, -1 + 5 ) = (0, 4)
Find out more on translation at https://brainly.com/question/12861087
#SPJ1
Aurora is planning to participate in an event at her school's field day that requires her to complete tasks at various stations in the fastest time possible. To prepare for the event, she is practicing and keeping track of her time to complete each station.
The x-coordinate is the station number, and the y-coordinate is the time in minutes since the start of the race that she completed the task.
(1, 2), (2, 4), (3, 8), (4, 16)
Part A: Is this data modeling a linear function or an exponential function? Explain your answer. (2 points)
Part B: Write a function to represent the data. Show your work. (4 points)
Part C: Determine the average rate of change between station 2 and station 4. Show your work. (4 points)
Answer:
Step-by-step explanation:
Part A:
This data modeling an exponential function because the y-coordinate values are increasing by multiplying the previous value by 2, which is the common ratio.
Part B:
To write a function to represent the data, we can use the formula for an exponential function: y = a(b)^x, where a is the initial value, b is the common ratio, and x is the input value (station number in this case).
Using the given data points, we can write two equations:
2 = a(b)^1
16 = a(b)^4
Dividing the second equation by the first equation, we get:
8 = (b)^3
Taking the cube root of both sides, we get:
b = 2
Substituting b = 2 in the first equation, we get:
2 = a(2)^1
2 = 2a
a = 1
Therefore, the function that represents the data is: y = 1(2)^x, or y = 2^x.
Part C:
To find the average rate of change between station 2 and station 4, we need to calculate the slope of the line passing through the points (2, 4) and (4, 16).
Using the formula for slope, we get:
slope = (y2 - y1) / (x2 - x1)
slope = (16 - 4) / (4 - 2)
slope = 6
Therefore, the average rate of change between station 2 and station 4 is 6 minutes per station.
What is the Mean, median, mode of 12,9,17,15,10
Step-by-step explanation:
first, for such questions, we sound always sorry the list of data points :
9, 10, 12, 15, 17
the mean is the sum of all data points divided by the number of data points. we have 5 data points.
mean = (9+10+12+15+17)/5 = 63/5 = 12.6
median is the data point for which half of the other data points are smaller, and the other half of other data points are larger.
so, for our 5 days points,
median = 12
the middle element in our sorted list.
mode simple defines the data value that appears the most frequently in the list.
in our case all values appear exactly once.
some people say then that the mode is all numbers in the list.
but most commonly we say that this list has no mode.
1. explain how and why the area under a curve can be described using an integral. what is an integral??
What is the domain and range of the following relation? Is it a function?{(1, 1), (2, 2), (3, 5), (4, 10), (5, 15)}
The given relation is a set of ordered pairs {(1, 1), (2, 2), (3, 5), (4, 10), (5, 15)}. The first element of each pair represents the input or domain value, and the second element represents the output or range value.
The domain of the relation is the set of all first elements of the ordered pairs, which is {1, 2, 3, 4, 5}. The range of the relation is the set of all second elements of the ordered pairs, which is {1, 2, 5, 10, 15}.
To check whether the relation is a function or not, we need to ensure that each input value (i.e., element of the domain) is associated with a unique output value (i.e., element of the range). In other words, there should not be more than one ordered pair with the same first element.
In this case, each input value is associated with a unique output value, so the relation is indeed a function. Specifically, it is a function from the set of integers {1, 2, 3, 4, 5} to the set of integers {1, 2, 5, 10, 15}.
Learn more about range value.
https://brainly.com/question/30821383
#SPJ4
Solve the two simultaneous equations. You must show all your working. 3t+2p=15. 5
5t+4p=28. 5
The answer is t =2.5 and p = 16
the mayor of a town has proposed a plan for the annexation of an adjoining community. a political study took a sample of 800 voters in the town and found that 60% of the residents favored annexation. using the data, a political strategist wants to test the claim that the percentage of residents who favor annexation is more than 55% . testing at the 0.01 level, is there enough evidence to support the strategist's claim?
The political strategist wants to test the claim that the percentage of residents who favor annexation is more than 55%.
The sample size is 800 voters in the town and 60% of the residents favored annexation.
In order to test the claim, a hypothesis test can be conducted. The null hypothesis (H0) would be that the percentage of residents who favor annexation is 55% or less. The alternative hypothesis (Ha) would be that the percentage of residents who favor annexation is more than 55%.
Using a significance level of 0.01, the critical value for the test is 2.33 (based on a one-tailed test with 799 degrees of freedom). The test statistic can be calculated as follows: z = (0.6 - 0.55) / sqrt((0.55 * 0.45) / 800) = 3.06, Since the test statistic (3.06) is greater than the critical value (2.33),
there is enough evidence to reject the null hypothesis and support the alternative hypothesis that the percentage of residents who favor annexation is more than 55%. Therefore, it can be concluded that the political strategist's claim is supported by the data.
Hypothesis:
- Null hypothesis (H0): The proportion of residents favoring annexation is 55% (p = 0.55)
- Alternative hypothesis (H1): The proportion of residents favoring annexation is more than 55% (p > 0.55), We will use a one-sample z-test for proportions, with a significance level of 0.01.
Given data:
- Sample size (n): 800 voters
- Proportion of residents favoring annexation in the sample: 60% (0.60).
Test statistic calculation: - z = (sample proportion - assumed proportion) / standard error
- Standard error = sqrt[(p * (1 - p)) / n]
- In this case, p = 0.55 (assumed proportion) and n = 800 (sample size).
Find the z-score and compare it to the critical value at the 0.01 significance level (z-critical = 2.33 for a one-tailed test). If the calculated z-score is greater than the critical value,
we reject the null hypothesis, supporting the strategist's claim that more than 55% of residents favor annexation.
To know more about percentage click here
brainly.com/question/24120406
#SPJ11
If a fair coin is tossed 5 times, what is the probability, to the nearest thousandth, of
getting exactly 5 tails?
The probability, to the nearest thousandth, of getting exactly 5 tails is 0.031
The likelihood of getting tails on a single flip of a reasonable coin is 0.5. To discover the likelihood of getting precisely 5 tails in 5 flips, we utilize the binomial likelihood equation:
P(X = k) = (n select k) * [tex]p^k * (1-p)^(n-k)[/tex]
where:
n = 5 (number of trials)
k = 5 (number of victories)
p = 0.5 (likelihood of tails on a single flip)
Stopping within the values, we get:
P(X = 5) = (5 select 5) * [tex]0.5^5 * (1-0.5)^(5-5)[/tex]
= 1 * 0.03125 * 1
= 0.03125
So the likelihood of getting precisely 5 tails in 5 flips is around 0.031 (adjusted to the closest thousandth).
To know more about probability refer to this :
https://brainly.com/question/24756209
#SPJ1
x = 59
1) Start by isolating the radical on one side using PEMDAS backwards
4√(x - 10) + 15 = 43
4√(x - 10) = 28 (Subtraction)
√(x - 10) = 7 (Division)
2) Square both sides and solve for x
√(x - 10)² = 7² x - 10 = 49
x = 59 (Addition)
The solution to the equation 4√(x - 10) + 15 = 43 is x = 59.
What is equation?A statement that affirms the equivalence of two expressions joined by the equals symbol "=" is known as an equation.
Yes, your steps are correct. Here's the solution to the equation:
4√(x - 10) + 15 = 43
To isolate the radical term on one side of the equation, we first subtract 15 from both sides:
4√(x - 10) = 28
Next, we divide both sides of the equation by 4:
√(x - 10) = 7
To solve for x, we square both sides of the equation:
(√(x - 10))² = 7²
Simplifying the left-hand side of the equation, we get:
x - 10 = 49
Adding 10 to both sides of the equation, we get:
x = 59
Therefore, the solution to the equation 4√(x - 10) + 15 = 43 is x = 59.
Learn more about equation on:
https://brainly.com/question/27893282
#SPJ4
A pool has the following shape. What is the area of the entire pool? How do you know?
x + 2 yards
x yards
x + 9 yards
x+ 5 yards
The area of the bottom of the pool is 84 square yards.
To start, we need to remember that area is a measure of how much surface is covered by a two-dimensional shape. In this case, we want to find the area of the bottom of the swimming pool. The bottom of the pool is a rectangular shape, and we can find its area by multiplying its length by its width.
We are given that the pool is 14 yards long and 6 yards wide, so we can plug those values into the formula for the area of a rectangle:
Area = length x width
Area = 14 yards x 6 yards
Area = 84 square yards
This means that if you were to measure the surface of the pool from above, you would find that it covers 84 square yards of space.
To know more about area here
https://brainly.com/question/14994710
#SPJ4
Complete Question:
A swimming pool is 14 yards long and 6 yards wide. What is the area of the bottom of the pool?
a. Find the first four nonzero terms of the Maclaurin series for the given function. b. Write the power series using summation notation. c. Determine the interval of convergence of the series. f(x) = 8e a. The first nonzero term of the Maclaurin series is The second nonzero term of the Maclaurin series is The third nonzero term of the Maclaurin series is a The fourth nonzero term of the Maclaurin series is . b. Write the power series using summation notation 00 - 4x 8e - Σ ) k=0 c. The interval of convergence is |-(Type your answer in interval notation.)
a. The first four nonzero terms are 6, 6x, -3×2, 9×3.
b. f(x) = ∑n=0∞ (-3)n(x)n+1.
c. Interval of convergence is (-∞, ∞).
a. The first four nonzero terms of the Maclaurin series for the given function are:
f(x) = 6 + 6x - 3×2 + 9×3 - 27×4 + ...
b. The power series can be written using summation notation as:
f(x) = ∑n=0∞ (-3)n(x)n+1
c. The interval of convergence of the power series is (-∞, ∞). This is because the power series is a polynomial and polynomials have an interval of convergence of (-∞, ∞).
The power series is a polynomial because it is a finite sum of terms of the form aₙ × xⁿ, where aₙ is a constant. Therefore, the power series converges for all values of x.
Complete Question:
a. Find the first four nonzero terms of the Maclaurin series for the given function.
b. Write the power series using summation notation.
c. Determine the interval of convergence of the series. f(x) = 6 e⁻³ˣ.
The first nonzero term of the Maclaurin series is ____.
To learn more about summation notation visit:
https://brainly.com/question/24495014
#SPJ4
P(Power) + P(Type II Error) = 1, so P(Type II Error) = 1 - P(Power) = 1 - 0.9228 = 0.0772.
The statement "P(Type II Error) = 1 - P(Power) = 1 - 0.9228 = 0.0772" is correct, assuming a significance level of α = 0.05.
The power of a statistical test is the probability of correctly rejecting a null hypothesis when it is false (i.e., detecting a true effect). The power of a test is affected by factors such as the sample size, effect size, significance level, and variability in the data.
On the other hand, a Type II error occurs when we fail to reject a null hypothesis that is actually false (i.e., we do not detect a true effect). In other words, it is the probability of accepting a null hypothesis when it is false.
The statement P(Power) + P(Type II Error) = 1 is incorrect. It should be P(Power) + P(Type II Error) = 1 - α, where α is the significance level of the test. The significance level is the probability of rejecting a null hypothesis when it is true (i.e., the probability of making a Type I error).
Assuming a significance level of α = 0.05, if the power of a test is 0.9228, then the probability of making a Type II error is:
P(Type II Error) = 1 - P(Power)
= 1 - 0.9228
= 0.0772
for such more question on probability
https://brainly.com/question/13604758
#SPJ11
two friends leave school at the same time, sarah is heading due north and beth is heading due east. one hour later they are 5 miles apart. if sarah had traveled 4 miles from the school, how many miles had beth traveled?
Beth had traveled 3 miles from the school. They are traveling at right angles to each other, forming a right triangle.
Let's follow these steps:
1. Sarah is heading due north, and Beth is heading due east. They are traveling at right angles to each other, forming a right triangle.
2. One hour later, they are 5 miles apart. This distance represents the hypotenuse of the right triangle.
3. We are given that Sarah has traveled 4 miles from the school. This distance represents one side of the right triangle (north side).
4. We need to find the distance Beth traveled, which represents the other side of the right triangle (east side).
We can use the Pythagorean theorem to solve this problem:
a² + b² = c²
where a and b are the lengths of the two shorter sides (Sarah and Beth's distances), and c is the length of the hypotenuse (the distance between them).
In this problem, we have:
a = 4 miles (Sarah's distance)
c = 5 miles (distance between them)
We need to find b (Beth's distance). So, we can rewrite the Pythagorean theorem as:
b² = c² - a²
Now, plug in the given values:
b² = 5² - 4²
b² = 25 - 16
b² = 9
To find b, take the square root of both sides:
b = √9
b = 3
So, Beth had traveled 3 miles from the school.
to learn more about right triangle click here:
brainly.com/question/29294907
#SPJ11
The shape of the faces of a pentagon based pyramid are ______ and ______
Please hurry who will do it i will vote him brainliest
Answer:
Step-by-step explanation:
pentagonal, triangular
Find two nontrivial functions f(x) and g(x) so f(g(x)) = -5/(x+4)^4
The two nontrivial function that satisfy the equation f(g(x)) = -5/(x+4)⁴ is f(x) = -5/x⁴ and g(x) = x + 4.
To see why these functions work, let's substitute g(x) into f(x) to get f(g(x))
f(g(x)) = f(x + 4) = -5/(x+4)⁴
So, we have shown that f(g(x)) = -5/(x+4)⁴ as required.
It's worth noting that there may be other nontrivial functions that satisfy the given equation. However, the functions f(x) = -5/x⁴ and g(x) = x + 4 are a simple and straightforward example.
To know more about nontrivial function here
https://brainly.com/question/31062054
#SPJ4
Which composition of transformations maps figure efgh to figure efgh?.
To determine the composition of transformations that maps figure efgh to figure efgh, we need to first identify the transformations involved.
A transformation is a change in position, size, or shape of a figure. In this case, we can see that figure efgh has not changed in size or shape, so the transformation must involve a change in position.
One possible transformation that could be involved is a translation, which involves moving the figure along a straight line without changing its size or shape. Another possible transformation is a rotation, which involves turning the figure around a fixed point.
To find the composition of transformations that maps figure efgh to itself, we need to experiment with different combinations of translations and rotations until we find one that works. For example, we could first rotate the figure 90 degrees clockwise around its center, and then translate it 2 units to the right and 3 units up. This composition of transformations would move figure efgh to a new position, but still maintain its size and shape.
Alternatively, we could first translate the figure 2 units to the right and 3 units up, and then rotate it 90 degrees counterclockwise around its center. This would also result in a new position for the figure, but with the same size and shape as the original.
In conclusion, there are multiple compositions of transformations that could map figure efgh to itself, including combinations of translations and rotations. It is important to experiment with different options and test them to ensure that they maintain the size and shape of the figure.
To Know more about rotations click here
brainly.com/question/2763408
#SPJ11
suppose that 25 percent of women and 22 percent of men would answer yes to a particular question. in a simulation, a random sample of 100 women and a random sample of 100 men were selected, and the difference in sample proportions of those who answered yes
A normal distribution centered at 0 with a standard deviation of approximately 0.05 is most likely to be a representation of the simulated sampling distribution of the difference between the two sample proportions.
The difference in sample proportions between the two groups can be approximated by a normal distribution if the sample size is large enough. In this case, we have a sample size of 100 for each group, which is considered large enough.
The expected value of the difference in sample proportions is 0.25 - 0.22 = 0.03. The standard deviation of the difference can be calculated as follows:
√[(0.25 * 0.75 / 100) + (0.22 * 0.78 / 100)] = 0.0499Therefore, the most likely representation of the simulated sampling distribution of the difference between the two sample proportions is a normal distribution centered at 0 with a standard deviation of approximately 0.05.
To learn more about sample proportions, here
https://brainly.com/question/29912751
#SPJ1
The complete question is:
Suppose that 25 percent of women and 22 percent of men would answer yes to a particular question. In a simulation, a random sample of 100 women and a random sample of 100 men were selected, and the difference in sample proportions of those who answered yes, Pwomen menwas calculated. The process was repeated 1,000 times. Which of the following is most likely to be a representation of the simulated sampling distribution of the difference between the two sample proportions?
mr kelly sets off a bottle rocket from the ground. the height of the rocket over time is modeled by the function h(t) = -16t^2 + 48t, where t stands for time in seconds and the height off the rocket is measured in feet.
a. find h(2). use a sentence to explain what it means in context.
b. When will the rocket hit the ground?
a) Height at 2, h(2) = 64 feet
b) The rocket will hit the ground 3 seconds after it was launched.
a. To find h(2), we simply substitute t = 2 in the given equation:
h(2) = -16[tex](2)^{2}[/tex] + 48(2) = 64 feet
This means that 2 seconds after the bottle rocket was launched, it had reached a height of 64 feet.
b. We know that the rocket will hit the ground when its height h(t) equals zero. So, we need to solve the equation:
-16[tex]t^{2}[/tex] + 48t = 0
We can factor out -16t to get:
-16t(t - 3) = 0
This gives us two possible solutions:
t = 0 (which corresponds to the time when the rocket was launched)
t = 3 (which corresponds to the time when the rocket hits the ground)
To learn more about Height here:
https://brainly.com/question/10726356
#SPJ1
the mean age of a sample of people who were playing the slot machines is years, and the standard deviation is years. the mean age of a sample of people who were playing roulette is with a standard deviation of years. can it be concluded at that the mean age of those playing the slot machines is less than those playing roulette? use for the mean age of those playing slot machines. assume the variables are normally distributed and the variances are unequal.
As calculated t-value (-7.07) is less than the critical t-value (-1.969), we reject the null hypothesis and conclude that the mean age of those playing slot machines is significantly less than those playing roulette. So, we can conclude that the mean age of those playing slot machines is less than those playing roulette.
To determine whether the mean age of those playing slot machines is less than those playing roulette, we can perform a two-sample t-test.
The null hypothesis (H0) is that there is no difference in the mean age between the two groups, and the alternative hypothesis (Ha) is that the mean age of those playing slot machines is less than those playing roulette.
We can calculate the t-test statistic as follows:
t = (x₁ - x₂) / √ (s₁²/n₂ + s₂²/n₂)
Where: x₁ = mean age of those playing slot machines x₂ = mean age of those playing roulette s₁= standard deviation of the sample of those playing slot machines s₂ = standard deviation of the sample of those playing roulette n₁ = sample size of those playing slot machines n₂ = sample size of those playing roulette
Substituting the given values, we get:
t = (50 - 55) / √(25/100 + 36/100) t = -5 / √(0.25 + 0.36) t = -5 / 0.707 t = -7.07 (approx)
Using a t-table with (100-1) + (150-1)= 249 degrees of freedom and a significance level of 0.05 (two-tailed), we find the critical t-value to be ±1.969.
Since our calculated t-value (-7.07) is less than the critical t-value (-1.969), we reject the null hypothesis and conclude that the mean age of those playing slot machines is significantly less than those playing roulette.
Therefore, we can conclude that the mean age of those playing slot machines is less than those playing roulette.
To learn more about null hypothesis
https://brainly.com/question/28920252
#SPJ4
An eagle travelled 6km in 400 secconds. Calculate the avraege speed of the eagle in meters per second
The average speed of the eagle who traveled 6km in 400 seconds in meters per second is 15.
Average speed of the eagle = total distance / total time taken
Total distance traveled by the eagle = 6km
Total time taken by an eagle to travel 6 km = 400 s
To convert 6 km into m
1 km = 1000 m
6 km = 6 × 1000m
6 km = 6000 m
Average speed of the eagle = 6000/400
Average speed of the eagle = 15 meter per second
Hence, the average speed of the eagle is 15 meter per second .
To know more about average speed click here :
https://brainly.com/question/9834403
#SPJ4
(L1) Given: ΔABC;BD↔⊥AC¯;AB=BC;AD=5 inchesWhat is the length of DC¯?By which Theorem?
The length of DC¯ is (BC - 10)/2.
We are asked to find the length of DC¯.
Since AB=BC, we can conclude that triangle ABC is an isosceles triangle. Therefore, angle ABC = angle ACB.
Since BD is perpendicular to AC¯, we can also conclude that triangle ABD and triangle CBD are congruent by the Hypotenuse Leg (HL) theo
Therefore, AD = CD, and we can write:
AB + AD + DC = 2(BC)
Since AB = BC, we can substitute and simplify to get:
AD + DC = BC
Since AD = 5 inches, we can substitute and solve for DC:
DC = BC - AD = AB - AD = BC/2 - AD/2
We know that AB = BC, so we can substitute and simplify further to get:
DC = AB/2 - AD/2
Since AB = BC and AD = 5 inches, we can calculate:
DC = BC/2 - AD/2 = AB/2 - AD/2 = (BC - 2AD)/2 = (BC - 10)/2
Therefore, the length of DC¯ is (BC - 10)/2.
for such more question on length
https://brainly.com/question/20339811
#SPJ11
Mr.Mole left his burrow and started digging his way down.
A represents Mr.Mole’s altitude relative to the ground (in meters) after t minutes.
A = -2.3t - 7
How fast did Mr.Mole Descend?
_____ meters per minute.
~
Answer:
2.3 meters per minute.
~
Mr.Mole’s descent speed is the relationship’s rate of change, which in linear relationships is represented by the slope of the graph.
The equation for A is in slope-intercept form. This means that the slope of the graph is -2.3
A slope of -2.3 means that Mr.Mole is descending by 2.3 meters each minute.
So therefore, Mr.Mole descended at 2.3 meters per minute.
How fast did Mr. Mole Descend: 2.3 meters per minute.
What is the slope-intercept form?In Mathematics and Geometry, the slope-intercept form of the equation of a straight line is given by this mathematical expression;
y = mx + c
Where:
m represents the slope or rate of change.x and y are the points.c represents the y-intercept or initial value.Based on the information provided about the Mr. Mole's descent, it can be modeled by using this linear equation:
y = mx + c
A = -2.3t - 7
By comparison, we have the following:
Slope, m = -2.3.
y-intercept, c = -7.
In conclusion, a rate of change (slope) of -2.3 simply means that Mr. Mole descended at a speed of 2.3 meters each minute.
Read more on slope-intercept here: brainly.com/question/4074155
#SPJ1
Salary is 25,000$ and you get a 2. 5% raise. What will the new salary be
New salary is $25625
Sorry for bad handwriting
you can roughly locate the median of a density cure by eye because it is
Roughly where the curve intersects the line that represents half of the total area under the curve.
In other words, if you were to draw a horizontal line that cuts the area under the curve in half, the point at which the curve intersects this line would be a rough approximation of the median.
However, it's important to note that this method of locating the median by eye is not always accurate, especially for skewed or non-symmetric distributions.
In such cases, more precise methods, such as calculating the median using statistical software or by hand, may be necessary.
for such more question on curve intersects
https://brainly.com/question/19132778
#SPJ11
Find the following:
V.A.:
V.A.:
H.A.:
Domain:
Range:
