Answer:
Equipment Reliability and Maintenance
SUBSTANTIAL CAPITAL investments, in the form of facilities and equipment, are required for manufacturing almost all goods of economic significance. The productivity of these investments is a fundamental element of competition among companies and nations. Events that slow or interrupt the manufacturing process or degrade the product impair the competitiveness of a manufacturing enterprise.
The term equipment reliability and maintenance (ERM) encompasses not only equipment, such as machines, tools, and fixtures, but also the technical, operational, and management activities, ranging from equipment specifications to daily operation and maintenance, required to sustain the performance of manufacturing equipment throughout its useful life. This chapter addresses all causes of diminished or degraded output. The panel considers ERM to be a significant factor in the competitiveness of manufacturing firms, an assessment supported by the case studies in the section on present practice (pp. 57-63).
Historically, the evolution of ERM can be traced from breakdown maintenance and repair to preventive maintenance to predictive maintenance. Breakdown maintenance and repair is the after-the-fact restoration of failed equipment. Preventive maintenance is the systematic servicing of equipment to reduce the possibility of failure. Predictive maintenance, in use in U.S. industry for only four or five years, is usually understood to involve the use of computer software to detect conditions that might eventually lead
You are working on a large plant floor when you hear an explosion, which is followed by billowing smoke, debris and the fire alarm going off. Should you shelter in place ?
Question 9 (1 point)
In the Standard Automotive Tire Designation P205/65R 15 94 T, the ________ is 94.
a)Load Index
b)Tread Height
c)Speed Rating
d)Wheel Height
Answer:
The Load Capacity is 94
Explanation:
I hope this helps!
Question
The CNC is the primary interface between the machine operator and the machine. Is this statement TRUE or FALSE?
True
False
Answer:
True
Explanation:
The CNC is the primary interface between the machine operator and the machine.
The football team has a total of 20 jerseys. There are 6
medium-sized jerseys. What percent of the jerseys are medium-sized jerseys?
Answer:
89
Explanation:
EverFi future smart pie chart
Bond: 20%
Mutual fund: 15%
Stock: 50%
Savngs account: 15%
Answer:
wow!!!!!! you pie chart is sweet
The representation of the following data in a pie chart is given in the diagram;
Bond: 20%Mutual fund: 15%Stock: 50%Savngs account: 15%What is pie chart?
A pie chart is a circle which is used for the diagramatic representation of data. It is usually done by dividing the circle into different areas or slices to represent each data.
Each slice could be used to represent different units such as degree, percentage, centimeters, kilograms.
Bond: 20%
Mutual fund: 15%
Stock: 50%
Savngs account: 15%
Total = 20% + 15% + 50% + 15%
= 100%
Learn more about pie chart:
https://brainly.com/question/796269
#SPJ2
water 1°C.
12. Force is measured in
in the SI metric system.
Answer:
because metric units are decimal based they are easily converted by moving decimal points
How to calculate tension.
Answer:
Tension can be easily explained in the case of bodies hung from chain, cable, string
Explanation
uniform speed, tension; T = W.
T=m(g±a)
How much does it cost to fix a rail road
Answer:
money
Explanation:
If too much amplification is applied to an audio signal, waveform distortion can occur causing a phenomenon called _____.
Answer: clipping
Explanation:
a solid yellow line on your side of the center stripe means
It means:
"Do Not Pass." When parking near a corner, you may park your vehicle no closer than 20 feet from a crosswalk.
<3
Do a essay about engineering
Take a look around yourself. What do you see? Maybe books, chairs, a television, or even your clothes. All the day to day things that are man-made, you can be sure that an engineer helped make it. Engineers have shaped our world as we know it. There are many different kinds of engineers from chemical, mechanical, textile, civil, agricultural and structural engineers. Our civilization would be as advanced as the Stone Age without these people. This career demands a wide education of math and science. It is an ever-changing career with new advances in materials and the way products are produced. Engineering careers are very secure with respect to compensation. Regardless of this, it does have it’s disadvantages…show more content…
(Britannica 243) Another disadvantage of being an engineer is the actual status of being one. It is not looked upon as highly as other fields such as doctors and lawyers. Most of the time they are looked upon as nerds. In addition, most engineers are not promoted to high level positions such as presidents or top executives. They do not have the accounting or business education to do that particular job. This means that most engineers never get the opportunity to be their own boss. (Basta 22)
The job of an engineer itself is a creative job. The actual definition of an engineer is “The profession in which a knowledge of the mathematical and natural sciences gained by study, experience and practice is applied with judgment to develop ways to utilize the materials and forces of nature economically for the benefit of mankind.” (Bastas 24) In having the basic skills and experiences in math and science, an engineer is basically an inventor. They are given a problem and are depended on to come up with a solution. Whether it be a new chemical, a mechanical part, or even a whole new system such as computer operating program, engineers are the problem solvers of our materialistic society.
There are four major types of essay and they are the Descriptive, Argumentative, Expository and the Narrative essay.
What is an essay?An essay is generally are a piece of writing that gives an argument, educates or entertains a reader about a specific topic.
Writing an essay about engineering is to educate people about the field of study, and therefore, falls under the Expository essay.
Therefore, below are some tips that will guide you in writing an expository essay:
Start the essay structure with a good introduction.Write down a brief outline and craft out a summary of discussion topics to support your idea.Choose the point of view used in writing carefully.Use a clear concise language to write. Do NOT use figurative language.State your argument. Clarify your main point.Capture the reader's attention with your appealing introduction.Use your strong ideas and focus on them on each paragraph.Connect sentences with clear and logical main idea.Include your supporting information and cite your sources.Summarize your points/arguments with a concise and clear conclusion.Read more about essay here:
https://brainly.com/question/25607827
Which principle of the software engineering code of ethics has gilbert violated?.
Answer:
Judgement
Explanation:
Gilbert is required by the Judgement Principle to "disclose those conflicts of interest that cannot reasonably be avoided or escaped." Since Gilbert professionally believes that the software meets specifications, secures documents, and satisfies user requirements, it is not clear if he violated any principle. However, he could have informed his client of his interest in the software and also presented other software packages of different companies from which the client could make its independent choice.
Why does the compression-refrigeration cycle have a high-pressure side and a low-pressure side?
a.The pressure difference is the result of polar molecular alignment due to the intense magnetic field created by the compressor motor.
b.So the refrigerant can condense at a low pressure and temperature and evaporate at a high pressure and temperature
c.The pressure difference isn't intentionally created but is simply the result of circulating refrigerant within the compressor.
d.So the refrigerant can evaporate at a low pressure and temperature and condense at a high pressure and temperature
Answer: D
Explanation:
The refrigerant can evaporate at low pressure and temperature and condense at high pressure and temperature. The correct option is D.
What is the Vapor compression cycle?The vapor compression cycle is a refrigeration cycle in which the heat is extracted from one place and is transferred to the atmosphere to cool the specified place.
Refrigeration is the process of keeping the temperature of the required place lower than that of the atmosphere by using different refrigeration processes like vapor compression, and vapor absorption processes.
In the vapor compression refrigeration cycle the refrigerant is evaporated at low pressure and temperature and condensed at high pressure and temperature.
The vapors of refrigerants are formed by taking the heat now these vapors are compressed in the compressor at a higher temperature and pressure than that of the atmosphere so that heat can be transferred to the atmosphere.
To know more about the Vapor compression cycle follow
https://brainly.com/question/23540990
#SPJ2
There are two methods to create simple robots. First, you can construct them by purchasing various individual components and assembling them using your design. Second, you can buy various robotic kits available in the market and assemble them. Which method do you think is the best and why? Do you think robotic kits are useful?
Please help, I will mark the best answer as brainliest
Answer:
second way
Explanation:
robotic kits are simple and easy to make
what is the name of the flap on the horizontal stabilizer
Swag Answer:
They are called elevators
Swag Explanation :
They are called that for whatever reason mAsqUErADE MaSquerade tHat iS mY nAmE
Which cars are least likely to have catalytic converter stolen
Answer: Cars most likely to have catalytic converter stolen
Vehicles that have had the most thefts are: Toyota Prius, SUV's of all makes, Pick up Trucks of all makes, van's (mostly Honda), passenger cars (mostly Honda), 2 U-Haul trucks. Gov. Roy Cooper recently signed a bill that makes catalytic converter theft a felony.
Explanation:
What happens when you put diesel in a gas engine.
Explanation:Since diesel fuel is thicker and denser than gasoline, the fuel pump will struggle to move the diesel/gasoline mixture through the system. Instead, it will clog up the fuel filter. And whatever amount of diesel that then makes its way to the engine will clog the fuel injectors, making them inoperable.
some roadways are tilted as they go around a turn. what is the purpose of this tilt?
Answer:
So no one hits each other
Explanation:
If they dont turn or stop everyone will crash
If f = 8. 0 n and m = 1. 0 kg, what is the tension in the connecting string? the pulley and all surfaces are frictionless. A)4. 1 n.
Answer:
a
Explanation:
yesirrr
Write the formula for calculating mechanical advantage for Levers, pulleys and wheels and axles.
Answer:
TO BE HONEST I DONE KNOW :D
Bon
9. Not having enough food can contribute to
someone remaining in the
A business cycle
B cycle of poverty
inflationary cycle
D same school
What is the primary difference between the process of lost-wax casting as practiced in ancient times and that same process today
Answer:
Today, multiples can be created from the process. high-relief projects boldly from the background, and elements of high-relief may be in the round, unattached to the background.
Many engines in FWD vehicles must be removed with the transmission still attached.
O a. True
O b. False
Answer:
True
Explanation:
Technician A says that all ATF (automatic transmission fluid)'s are interchangeable.
Technician B says that new ATF should be red or pink in color. Who is correct?
A only
B only
Both
Neither
Answer:
im guessing A
Explanation:
A forced-air heating system uses a system of ____ air ducts to deliver warm air to the conditioned spaces.
why is it important to follow the engineering design process before building a prototype
It is crucial to adhere to it since it provides a clear plan for how to identify the best solution to the issue in the most efficient manner.
You can experience your concept becoming real for the first time by creating a prototype. You can interact with, touch, and even destroy a prototype.
Why is it important to follow the engineering design process?Students that pursue careers in engineering and adhere to the steps of the design process are better able to think creatively because there is no one "correct answer." Through testing and ongoing improvement, engineers are encouraged to develop their own open-ended designs.
A working model of a solution is called a prototype. It is typically constructed using different materials than the final product, and it is typically less polished. A crucial stage in creating a final solution is creating a prototype, which enables the designer to test how the solution will function.
Learn more about the engineering design process here:
https://brainly.com/question/27896695
#SPJ2
SUBJECT : SCIENCE
the change in temperature will not be the same for all substances assuming that the same amount of heat is added or subtracted because
because not all substances react the same to temperature changes. If you heat a metal and an organic substance and you turn the temperature up, the organic substance like water will react (boil) while most metals need higher temperature to react.
Tensile strength is the amount of force necessary to:
Tensile strength is the amount of force required to pull something up to the point where it breaks.
Tensile strength is the amount of force required to pull something up to the point where it breaks. The tensile strength of a material is the maximum amount of tensile stress that it can be subjected to before failure.
Tensile stress is the ratio of the force applied to the cross sectional area. It is given by:
Tensile stress = Force / cross sectional area
Find out more at: https://brainly.com/question/17108735
Which of the following is critical when performing maintenance?
A) informing a customer of the vehicles tire pressure.
B) informing a customer of a vehicle concern.
C) informing a customer of the vehicle’s manufacturer date.
D) informing the customer of maintenance promotions.
work of energy dimersional formula
Answer:
Common symbols
W
SI unit
joule (J)
Other units
Foot-pound, Erg
In SI base units
1 kg⋅m2⋅s−2
Derivations from
other quantities
W = F ⋅ s
W = τ θ
Dimension
M L2 T−2
Explanation:
please Mark my answer in brainlist
