Which of the following best describes why many interest groups form political action committees?

if we react 10 moles of hydrogen with 6 moles of oxygen. Oxygen is the limiting reagent and 10moles of  water is produced

The limiting reagent is the reactant that runs out first, limiting the amount of product that can be produced. In order to determine the limiting reagent, we need to compare the stoichiometry of the reactants with the balanced equation. We can see that for every 2 moles of H2, 2 moles of H2O are produced. Also for every 1 mole of O2, 2 moles of H2O are produced.To determine the limiting reagent we have to find out which reactant is in excess, for that we can divide the number of moles of each reactant by its coefficient in the balanced equation. 10 moles of H2 / 2 moles of H2/1 mole of H2 = 5 moles of H2O are produced 6 moles of O2 / 2 moles of H2O/1 mole of O2 = 3 moles of H2O are producedSince 3 moles of H2O are produced, we can see that oxygen (O2) is the limiting reagent. So we can't produce more than 3 moles of H2O and the amount of water produced is 3 moles.

Learn more about moles here:

https://brainly.com/question/28239680

#SPJ4

A solution with an 8% (m/m) concentration was created by dissolving the sodium chloride in 40.0 g in 500.0 g of water. Sodium chloride, also known as table salt.

Sea salt has the chemical formula NaCl, which indicates a 1:1 ratio of sodium chloride ions, and is an ionic material despite also containing other chemical salts. With molar weights of 22.99 and 35.45 g/mol, respectively, 39.34 g of Na and 60.66 g of Cl make up 100 g of NaCl. The concentration can apply to any type of chemical mixture, even though it is most frequently used to describe solutes and solvents in solutions. Two variations of the molar (amount) concentration are the normal concentration and the osmotic concentration.

(40.0/500)*100, which equals 8, is the concentration formula.

Learn more about sodium chloride here

https://brainly.com/question/9811771

#SPJ4

Answer:

sand's specific heat capacity is low that water(i.e. 830J/kg°C) Due to it's low specific heat capacity it gets hotter easily. That's whythe sand on the shores of the lake feels so much hotter than the water in the lake even though the same solar energy is being absorbed by both materials.

The empirical formula of lysine is C₆H₁₄N₂.

By calculating the smallest whole number ratio from the mass percentages of a compound's constituent parts, it is possible to calculate its empirical formula.

We must first establish how many moles of each element are included in 1.50 g of lysine in order to determine the empirical formula for lysine. The mole ratios of the elements may then be calculated using these values and will match the ratio of the subscripts in the empirical formula.

We may determine how many moles of carbon and hydrogen are contained in 1.50 g of lysine by computing the mass of generated CO₂ and H₂O.

Moles of C = 2.72 g CO₂ x (1 mol CO₂ / 44.01 g CO₂) = 0.062 moles

Moles of H = 1.29 g H₂O x (2 moles H / 18.02 g H₂O) = 0.143 moles

Secondly, by being aware that lysine also generated 0.287 g of N. We can determine how many moles of N there are.

moles of N = 0.287 g N x (1 mole N / 28.02 g N) = 0.0102 moles

By dividing each element by the minimum number of moles, which is 0.0102 moles, we can now determine the ratio of the elements.

C = 0.062 moles / 0.0102 moles = 6

H = 0.12 moles / 0.0102 moles = 14

N = 0.0102 moles / 0.0102 moles = 1

Therefore, the empirical formula of lysine is C₆H₁₄N₂

Learn more about empirical formula at https://brainly.com/question/14044066

#SPJ4

Answer: 2.3*10^3 Pa.

Explanation: We can use the ideal gas law to determine the pressure of the system: PV = nRT

where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

The ideal gas constant R = 8.314 J/mol*K

Given:

n1 = 0.25 moles

V1 = 6.1 L

T1 = 298 K

P1 = 760 mmHg

n2 = 0.13 moles

V2 = 6.1 L

T2 = 100 K

We can use the equation PV = nRT to find the new pressure P2, using the information provided:

P2 = (n2RT2)/V2

We know that the volume of the bottle remains the same and we can convert the pressure from mmHg to Pascals

P2 = (0.138.314100)/6.1 = 2.3*10^3 Pa

Therefore, the pressure of the system when the amount of gas in the bottle is reduced to 0.13 mole and the temperature is reduced to 100 K is 2.3*10^3 Pa.

Answer:

132.62

Explanation:

i got the answer correct in the program

Solid argon is thick than liquid argon because the emulsion wind has a positive pitch, and the solid phase is stable at advanced pressure.

 The critical temperature for a pure substance is the temperature above which the gas cannot come liquid, anyhow of the applied pressure.

For a pure substance, the critical pressure is defined as the pressure above which liquid and gas cannot attend at any temperature. The critical temperature for a pure substance is the temperature above which the gas cannot come liquid, anyhow of the applied pressure.

Learn more about solid argon visit:

brainly.com/question/24736648

#SPJ4

The solubility product constant (Ksp) is a measure of the equilibrium of a salt in an aqueous solution.

Solubility is the ability of a substance to dissolve in a given solvent. It is a measure of the maximum amount of a solute that can be dissolved in a solvent.

It is used to determine the solubility of an ionic solid in a given solution. Ksp is the product of the concentrations of the ions in the solution at the equilibrium state.
Table 16.1 lists Ksp values for several ionic solids. The solubility of a salt is the amount of the salt that can be dissolved in a given amount of water or other solvent. To calculate the solubility of a salt, one must first determine the Ksp value for that salt. Then, the amount of the salt that will dissolve in a given amount of solvent can be calculated from the Ksp value.
To calculate the Ksp value for a salt given the solubility, one must first calculate the concentrations of the ions in the solution. This can be done by dividing the solubility of the salt by the total volume of the solution. Once the concentrations of the ions in the solution are known, the Ksp value can be determined by taking the product of these concentrations.

To learn more about solubility
https://brainly.com/question/28850265
#SPJ4

The volume of H2S needed to neutralize 45mL of NH2- is 0.053 L

A neutralization reaction, in which an acid and a base react to form water and salt.

The reaction between H2S and NH2- is a neutralization reaction. The balanced equation for the reaction is:

H2S(aq) + NH2-(aq) → NH4HS(aq)

We know that the concentration of H2S is 1.2 M and the concentration of NH2- is 0.80 M and we are trying to find the volume of H2S needed to neutralize 45mL of NH2-.

The number of moles of H2S can be calculated by using the formula:

moles = molarity x volume

The volume of H2S needed to neutralize 45mL of NH2- is equal to the number of moles of NH2- in 45mL, divided by the concentration of H2S.

moles of NH2- = 0.080 L * 0.80 mol/L = 0.064 mol

volume = moles of NH2- / molarity of H2S

volume = 0.064 mol / 1.2 mol/L = 0.053 L

Therefore, the volume of H2S needed to neutralize 45mL of NH2- is 0.053 L.

To know more about neutralization, visit:

brainly.com/question/27891712

#SPJ1

(A) 0.00 g of CH4 remains after the reaction.

To determine how much CH4 remains after the reaction, we need to use the balanced chemical equation and the concept of stoichiometry.

The balanced chemical equation for the reaction is:

CH4(g) + 2 O2(g) → CO2(g) + 2 H2O(g)

From the balanced equation, we know that 1 molecule of CH4 reacts with 2 molecules of O2.

We are given that 10.0 g of CH4 and 15.0 g of O2 react. We can use this information to determine the number of moles of CH4 and O2 that react.

1 mole of CH4 weighs 16.04 g and 1 mole of O2 weighs 32.00 g.

10.0 g of CH4 is equal to:

10.0 g / 16.04 g/mol = 0.623 mol CH4

15.0 g of O2 is equal to:

15.0 g / 32.00 g/mol = 0.46875 mol O2

Since the reaction is 2:1 ratio of O2: CH4, so 0.46875 mol O2 is enough for 0.234375 mol of CH4

So, no CH4 remains after the reaction.

Therefore, the answer is (A) 0.00 g of CH4 remains after the reaction.

Learn more about Balanced Chemical reactions here: https://brainly.com/question/30230799

#SPJ4

Answer:

Explanation:

a. Double Replacement: CH3COOH(aq) + NaHCO3(aq) --> CH3COONa(aq) + H2O(l) + CO2(g)

b. Decomposition: H2CO3(aq) --> H2O(l) + CO2(g)

c.Overall: CH3COOH(aq) + NaHCO3(aq) --> CH3COONa(aq) + H2O(l) + CO2(g) + CO2(g)

The concept that the electrostatic repulsion between electron pairs surrounding an atom causes these pairs to be separated as far as possible is the foundation of VSEPR theory.

The premise of VSEPR is that valence pairs surrounding atoms tend to repel each other, so we adopt configurations that minimize this repulsion. This reduces the molecule's energy, increases its stability, and determines the shape of the molecule. The main assumptions of VSEPR theory are:

The shape of a molecule depends on the number of electron pairs in the valence shell around the central atom. ii The electron pairs in the valence shell repel each other because the electron cloud is negatively charged. VSEPR theory is used to predict the shape of a molecule from the electron pairs surrounding the central atom of the molecule.

Learn more about the VSEPR theory in

https://brainly.com/question/14992767

#SPJ4

Yes, the precipitation of Cu(OH)₂ will form when 0.075 g of KOH is dissolved in 1.0 L of 1.0 X 10⁻³ M Cu(NO₃)₂.

Chemical reactions begin with reactants as well as products of a reaction are the substances that were produced. The common chemical formula can be used to represent a chemical reaction: Reaction products. During the chemical reactions, bonds shatter and reform. Also, the opposite outcome of the reaction will happen.

[OH⁻]₀ = 0.075g/56.105g/mol(1.01) = 1.34×10⁻³

Cu(OH)₂ (s) ⇄ Cu²⁺ (aq) + 2OH⁻(aq)

?                       0.0010       1.34×10⁻³

Q = [Cu²⁺][OH⁻]² =  0.0010 ×(1.34×10⁻³)² = 1.8×10⁻⁹ > Ksp 2.2×10⁻²⁰

This means that equilibrium will shift to the left, i.e., to reactants in which in turn implies that solid Cu(OH)₂ will be formed.

moles of Cu²⁺= 1.L x 1 x 10⁻³ M= 10⁻³

moles of KOH = 0.075 g/ 56.107 g/mol=0.00133

[Cu²⁺]=  10⁻³ / 1. L= 10⁻³  M

[OH⁻]=0.00133 / 1.L= 0.00133  M

Qsp=  10⁻³ (0.00133)² =1.786 x 10⁻⁹ >> Ksp ( = 2.2 x 10⁻²⁰)

To know more about reactants here

https://brainly.com/question/17096236

#SPJ4

rgashkjaehahnfpv kagjmpahjmsnklsmnn

This reaction releases a large amount of energy, which is what makes it useful in nuclear fusion reactors.

Nuclear fusion is a process in which two or more atomic nuclei join together to form a single, heavier nucleus.

The nuclear equation for the fusion of h-3 with h-1 to form he-4 is:
3H-1 + 1H-3 -> 4He-2 + 1n0
This equation describes the fusion of two hydrogen atoms to form a helium atom and a neutron. The first hydrogen atom (H-1) has a mass of 1, while the second hydrogen atom (H-3) has a mass of 3. When the two hydrogen atoms fuse together, they form a helium atom (He-2) with a mass of 4 and a neutron (n0) with a mass of 1. This reaction releases a large amount of energy, which is what makes it useful in nuclear fusion reactors.

To learn more about nuclear fusion
https://brainly.com/question/11498700
#SPJ4

Because of their hydrophobic tails & hydrophilic head, phospholipids constitute amphipathic molecules.

A phosphate and a choline molecule (blue) make up the hydrophilic head (orange). This head is joined to a triglyceride (green) that has two fatty acid tails that are hydrophobic (purple). (D) This image reveals the precise atoms that make up each of the phosphatidyl molecule's subdomains.

A individual phospholipid molecule comprises two parallel chains of oleic acids that create the lipid "tails" and a phosphate group, which is referred to as the "head," on the other end. The phosphate group's negative charge group makes the head neutral and hydrodynamic, or "water loving," in nature. As a result, the acid heads are drawn to the water.

To know more about hydrophilic head visit:

https://brainly.com/question/11183542

#SPJ4

Molar mass of oxygen = 32 g/mo is the ratio of the rate of diffusion of an unknown gas to oxygen is 0.85.

Oxygen is a chemical element with an atomic number of 8 (it has eight protons in its nucleus). Oxygen forms a chemical compound (O2) of two atoms which is a colorless gas at normal temperatures and pressures. Four representations chemists use for molecular oxygen.

We breathe in oxygen and some of this carbon dioxide. When we exhale, we breathe out less oxygen but more carbon dioxide than we inhale. The carbon we breathe out as carbon dioxide comes from the carbon in the food we eat.

To know more about oxygen visit

https://brainly.com/question/24248083

#SPJ4

A Lewis dot structure, also known as an electron dot structure, is a way of representing the valence electrons of an atom in a chemical compound.

It uses dots (also called "electron dots" or "Lewis dots") to represent the valence electrons of an atom. The number of dots around an atom is equivalent to the number of valence electrons in the neutral atom.The Lewis dot structure is written by placing the chemical symbol of the atom at the center and placing dots around it to represent its valence electrons. For example, the Lewis dot structure of carbon (C) would be represented as:C.with four dots around it, representing the four valence electrons of carbon. In a Lewis dot structure, the valence electrons are represented by dots, which are placed around the chemical symbol of the element.

To learn more about valance electrons here:

https://brainly.com/question/28977387

#SPJ4

The chemical equation which can be formulated as the most accurate model for the reaction of burning gasoline which is 2 C8H18(l) + 25 O2(g) → 16 CO2(g) + 18 H2O(g)

A car is designed in such a way where it utilizes fuel as its source of energy. This fuel actually contains all the chemicals where the engine of the car breaks down via combustion to facilitate the process of its functioning. Kinetic energy can be defined as the process of the form of mechanical energy produced as a result of motion. A moving object which individual etc uses kinetic energy to do so.

The fuel (gasoline) which is being supplied into the car's engine makes the car able to move from their place, therefore, we can say that the chemical energy present in the fuel is being converted to kinetic energy that is observable in the car on motion along with the release of heat by the engine.

Learn more about gasoline:

brainly.com/question/14588017

#SPJ4

Starting and stabilizing the stir function.

Pouring solids into a beaker or other container. To pour liquid, other types of funnels can be utilized. Pouring liquid into a beaker. A powder funnel is a funnel with a broad opening that is used for solids.

Start by beginning and stabilizing the stir function when heating a solution to boiling on a hot plate. To begin, reduce the heat to a medium setting. After approximately ten minutes of not witnessing boiling, increase the heat setting if required. When a certain amount of solute is dissolved in a solvent at constant pressure, the net result of energy absorbed or released as heat by the solution.

To learn more about heating a solution to refer:

https://brainly.com/question/29260808

#SPJ4

Answer:

I don't understand what you mean

Answer:

Physical Change

Explanation:

Melting of Wax Is a Physical Change but Burning of Wax Is a Chemical Change: Melting of wax, by itself, involves a change of state from solid to liquid.

The total number of millimoles present in the solution containing 161 mg of Na ions are 7.04 millimoles/L.

A substance's concentration in a quantity equivalent to a thousandth of a mole (a measure of the amount of a substance). as well known as millimole.

You would need to multiply the number of moles of sodium ions (Na+) in the solution by the number of litres of solution in order to get the number of millimoles represented in the solution.

Divide the given milligrames (mg) by the molar mass of sodium ion to convert mg to moles (22.99).

Therefore, 161 mg/L is 161/22.99 = 7.04 10⁻³ moles/L.

You would now need to multiply 7.04 10⁻³ moles/L by 1000 to convert from moles/L to millimoles/L.

Thus, 7.04 10⁻³ moles/L multiplied by 1000 equals 7.04 millimoles/L.

To know more about molar mass, visit :

https://brainly.com/question/1195479

#SPJ4

When Iron metal reacts with aqueous silver nitrate to produce aqueous iron(iii) nitrate and silver metal this will be represented as Single replacement reaction. In this the molecules of the chemical get replaced by other molecule.

This can be properly defined as, when One element in a molecule is replaced by another in a chemical reaction known as a single-displacement reaction, sometimes referred to as a single replacement reaction or exchange reaction.

It may be generalized as follows:

A + BC ⟶ AC + B.

To learn more about Single replacement reaction, click here: -

https://brainly.com/question/7039713

#SPJ4

Although the theoretical yield is 25.0 grams, the actual yield is only 20.0 grams. utilizing the percent yield stoichiometry formula.

Chemical The quantitative analysis of the reactants and products involved in a chemical process is known as stoichiometry. Stoichiometry is a combination of the Greek words "stoikhein," which means element, and "metron," which means measure.

Stoichiometric challenges can be divided into four groups: conversion from mass to mass. Mole conversion from mass. Conversion from moles to mass stages.

To know more about stoichometry visit:

https://brainly.com/question/14449296

#SPJ4

The volume of a sodium atom in cubic meters is 6.434×10[tex]^-6[/tex] cubic meters.

An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.

Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.

As the atom is sphere , volume is (r)³=(186)³=6.434×10[tex]^-6[/tex] cubic meters.

Learn more about atom,here:

https://brainly.com/question/13654549

#SPJ1

An aerosol is a suspension of tiny water droplets in the atmosphere. Due to the removal of N2O5(g) reacting to produce HNO3, reaction 1's equilibrium will change production of additional product (aq).

A suspension of tiny liquid or solid particles in air or even another gas is known as an aerosol. Aerosols can be created naturally or artificially. Fog or mist, dust, lesion from forests, and geothermal steam are a few instances of natural aerosols.

Numerous aerosol sprays contain dangerous substances like formaldehyde and xylene, which are used to protect anatomical objects in jars. In addition to being exceedingly dangerous for adults, kids, and household pets, these toxic substances now include carcinogens and carcinogen.

To know more about aerosol visit:

https://brainly.com/question/12656218

#SPJ4

a chemist has 70ml of 50% methane solution.8.75 ml of 80% methane solution to the 70 ml of 50% methane solution to get a 60% solution.

To solve this problem, you can use the formula for mixing two solutions of different concentrations:

C1V1 + C2V2 = C3V3

Where:

C1 = concentration of the first solution

V1 = volume of the first solution

C2 = concentration of the second solution

V2 = volume of the second solution

C3 = final concentration of the mixture

V3 = final volume of the mixture

We know that:

C1 = 50% = 0.50 (as a decimal)

V1 = 70 ml

C3 = 60% = 0.60 (as a decimal)

So we can rearrange the formula to solve for V2:

V2 = (C3V3 - C1V1) / C2

Since we don't know the final volume V3, we can assume it to be V1+V2

V2 = (0.60 * (V1 + V2) - 0.50 * V1) / 0.80

Solving this equation we have,

V2 = (0.60 * (70 + V2) - 0.50 * 70) / 0.80

V2 = (42 - 35) / 0.80

V2 = 7/0.8

V2 = 8.75 ml

So the chemist needs to add 8.75 ml of 80% methane solution to the 70 ml of 50% methane solution to get a 60% solution.

Learn more about concentration here:

https://brainly.com/question/29159285\

#SPJ4

One mole of Mg contains  6.022 × 10²³ number of Mg atoms. Hence, number  of moles of Mg that contains 2.5 × 10²⁵ atoms is 41.5 moles.

Any substance  that contains   6.022 × 10²³ number of atoms is called ne mole of that substance. This number is called Avogadro number. Hence, one mole of every elements contains Avogadro number of atoms.

Magnesium is 12th element in periodic table. It is an alkaline earth metal. The number of atoms in one mole of Mg is equal to Avogadro number. Mass of the element with one mole of amount is called its atomic mass.

Number of moles of Mg that contains 2.5 × 10²⁵ atoms :

= 2.5 × 10²⁵ atoms/6.022 × 10²³ = 41.5 moles.

Therefore, 41.5 moles of Mg contains 2.5 × 10²⁵ atoms.

Find more on Avogadro number:

https://brainly.com/question/11907018

#SPJ1

SO2 is a compound made up of sulfur and oxygen atoms, while SiO2 is a compound made up of silicon and oxygen atoms. The difference in their melting points can be attributed to their chemical structures and the types of chemical bonds that hold the atoms together.

In SO2, the sulfur atom is bonded to two oxygen atoms through covalent bonds. Covalent bonds are formed when atoms share electrons, and they tend to be relatively weak. As a result, the bonds in SO2 are not very strong and do not require a lot of energy to break. This means that SO2 has a relatively low melting point of 201 K.

In contrast, SiO2 is a network-solid, and the Si-O bond is covalent in nature and relatively strong. The network structure of SiO2 means that the atoms are tightly bound to one another in a repeating pattern. To melt SiO2, a large amount of energy is needed to break the strong covalent bonds between the atoms. This results in a high melting point of 1,883 K.

In summary, the difference in melting points of SO2 and SiO2 is due to the different types of chemical bonds and structures present in each compound. SO2 is held together by weaker covalent bonds, while SiO2 is held together by stronger covalent bonds in a network structure.

Learn more about Covalent Bonds here: https://brainly.com/question/10777799

#SPJ4

The difference in melting points between SO2 and SiO2 can be attributed to their different chemical structures and bonding types.

SO2 is composed of sulfur and oxygen atoms, which form a polar covalent bond. This means that the electrons are shared equally between the atoms, but the electrons are attracted more strongly to one atom than the other, creating a partial positive and partial negative charge.

The polar nature of the SO2 molecule creates relatively weak intermolecular forces, such as dipole-dipole interactions, which results in a relatively low melting point.

SiO2, on the other hand, is composed of silicon and oxygen atoms, which form covalent bonds. The covalent bond in SiO2 is much stronger than the polar covalent bond in SO2, as the electrons are shared equally between the atoms and there is no partial positive or negative charge. As a result, the intermolecular forces in SiO2 are much stronger, such as covalent bonds, which results in a much higher melting point.

Additionally, SiO2 is a network solid, meaning that the atoms are held together by a three-dimensional network of covalent bonds. This network structure makes SiO2 much more difficult to melt than SO2, as it requires a large amount of energy to overcome the covalent bonds holding the atoms together. This is another reason why SiO2 has a higher melting point than SO2.

Learn more about melting points:

https://brainly.com/question/29578567

#SPJ4

The phosphorus had a higher affinity for the cells than the sulfur.

Phosphorus is a chemical element that has the symbol P and atomic number 15. It is a nonmetallic, multivalent, and highly reactive element that is an essential component of life. Phosphorus is found in many fertilizers and is an important component of DNA and RNA. In plants, phosphorus helps with energy production, root growth, and seed production. In animals, phosphorus helps with growth and development, muscle contraction and nerve impulse transmission, and cellular communication.

This suggests that the radioactive phosphorus was taken up by the cells and incorporated into their structure, while the radioactive sulfur was not able to be taken up by the cells and remained in the supernatant. Therefore, the phosphorus had a higher affinity for the cells than the sulfur.

To learn more about phosphorus
https://brainly.com/question/12857562
#SPJ4

220.035 grams of HNO3 are needed to make 700.0 mL of a 5.0 M solution.

To make 700.0 mL of a 5.0 M solution of HNO3, we need to calculate the number of moles of HNO3 required, then convert that to grams. We can use the formula: Molarity = moles of solute / liters of solution.We know that the molarity is 5.0 M and the volume is 700.0 mL.

To convert mL to L, we divide by 1000. So: 5.0 M = moles of HNO3 / (700.0 mL / 1000)Solving for moles of HNO3: moles of HNO3 = (5.0 M) x (700.0 mL / 1000) = 3.5 moles of HNO3. Then we can use the molar mass of HNO3 to convert moles to grams.

HNO3 molar mass is 63.01 g/mol. So, the number of grams of HNO3 required is: 3.5 moles x 63.01 g/mol = 220.035 g. Therefore, 220.035 grams of HNO3 are needed to make 700.0 mL of a 5.0 M solution.

learn more about molarity

https://brainly.com/question/8732513

The concept molarity is an important method which is used to calculate the concentration of a solution. It is mainly employed to calculate the concentration of a binary solution. Here the grams of HNO₃ is 220.53 g.

The term molarity is defined as the number of moles of the solute present per litre of the solution. It is represented by using the letter 'M' and its unit is mol/L. The term molarity is also known as the molar concentration.

Molarity = Number of moles of the solute / Volume of the solution in litres

700.0 mL = 0.7 L

Number of moles  = Molarity × Volume of the solution

5.0 × 0.7 = 3.5

Number of moles = Mass / Molar mass

3.5 = m / 63.01

m = 220.53 g

Thus the mass in grams of HNO₃ is 220.53 g.

To know more about molarity, visit;

https://brainly.com/question/31545539

#SPJ2

The mass of ammonium nitrate (in g) that has the same number of nitrogen atoms as 2.5 liters of liquid nitrogen (n2) is 72.10g.

Given the volume of liquid nitrogen (V) = 2.5L = 2500ml

The liquefied form of the element nitrogen, known as liquid nitrogen, is created commercially through fractional distillation of liquid air.

The density of liquid nitrogen is (d) = 0.808 g/ml.

Let the mass of ammonium nitrate = m

We know that density = mass/volume

mass = density x volume

The molecular weight of liquid nitrogen = 28.0134g

m = (0.808 x 2500) x 1 mole N2/28.0134 = 72.10g

Hence the required mass of ammonium nitrate is 72.10g

To learn more about nitrogen click here https://brainly.com/question/16711904

#SPJ4