Dipoles in [tex]AsH_{3}[/tex] are attracted to other dipoles. The other chemicals all exhibit dispersion forces and are non-polar. [tex]AsH_{3}[/tex]'s tetrahedral molecular structure with a persistent dipole.
What is dipole-dipole attraction?
Dipole-dipole forces draw together the positive ends of two polar molecules that have opposite charges on their ends. Strengths of dipole-dipole forces per mole range from 5 kJ to 20 kJ.
Examples of polar compounds that interact dipole-dipole include hydrogen chloride (HCl), carboxylic acids (such as acetic acid), and amino acids. A polar molecule's positive end will pull another molecule's negative end and change the other molecule's location.
To know more about dipole-dipole attraction, visit:
https://brainly.com/question/29749942
#SPJ4
What are two characteristics are associated with metals?; What are the characteristics of metals with very low ionization energies?; Would metals have high or low ionization energy?; Why do metals have low ionization energy?
The two characteristics associated with metals are that they are malleable and ductile.
Metals with very low ionizing energies are easier to remove electrons from.
Due to their large size and their valence shell electronic configuration, alkali metal easily loses its electron to attain noble gas configuration. Therefore, the ionization enthalpy of alkali metal is low.
What is ionization enthalpy?
Ionization enthalpy is the minimal quantity of electricity required to get rid of the maximum loosely sure electron from an isolated gaseous atom so to transform it into gaseous cation is known as ionisation enthalpy.It's far measured in gadgets of electron volts (eV) in step with atom or kilo calorie in line with mole or kilo joules consistent with mole.thing affecting I.E includes the pressure of appeal between electrons and the nucleus, and the force of repulsion among electrons.To know more about ionization enthalpy, click the link given below:
https://brainly.com/question/24287699
#SPJ4
is present when a person experiences less effect from the same dose of a substance and needs more and more of it to achieve intoxication. (ap10.2)
When a person takes more of a substance to become intoxicated after taking the same quantity and experiences less of its effects, tolerance is present.
This person may have extraordinarily high drug levels in their blood. Alcohol, painkillers, stimulants, and nicotine are highly tolerable substances. Cannabis and PCP have low tolerance levels. Strong scientific data demonstrates that alcoholism or drug addiction is a chronic brain illness with relapse and recovery possibilities. As a person uses substances more frequently, their brains undergo significant changes that make it harder for them to maintain control over their substance use. Long after substance use has stopped, the brain remains. It is yet unknown how much or how long it might take to reverse these alterations.
To learn more about drugs click here https://brainly.com/question/13294633
#SPJ4
Balance the reaction of H2 + O2 = H2O using this chemical equation balancer!
Answer:
2 H2 + O2 ---> 2 H2O
Explanation:
Amount in the beginning:
- Left side : 2 H and 2 O
- Right side: 2H and 1 O
You need the same amount of H en O on each side. You are missing 1 O on the right side, so you add another one by placing 2 infront of O on the left side. Now the O is balenced.
The H is out of balance now. You have 4 on the right side and 2 on the left side. So you add 2 H on the left side, by putting a 2 ahead of H2. Now you have 4H in total on the left and on the right side. The reaction is now balenced.
Draw the expected major elimination product and identify the mechanism. H3C CH3 CH OH reaction These conditions will under go an O E2
H3C CH3 CH OH reaction These settings will under go an O E2. the expected major elimination product and determine the mechanism. Br CH, OH, H3C CO E1.
What is elimination?
These circumstances will have a reaction. The image below illustrates one of the products created when 1-bromo-2,2-dimethylcyclopentane is heated in ethanol. The nucleophile reaches the electrophilic carbon in an SN2 reaction at an angle of 180 ° to the leaving group. The stability of transition states provides a justification for the increase in E2 reaction rate with increasing alkyl substitution. In the stage of transition. NaOH. CH3. BH2. H. BH2. H2O2. CH3. The principal organic product for each of the following reactions, the anticipated major elimination product, and the process are note concerted addition of B-H across C=C.
To learn more about elimination from given link
brainly.com/question/29560851
#SPJ4
taking logarithms and antilogarithms is necessary to solve many chemistry problems. for practice, complete the following table, where is a number.
N = 7.35 ln in row 1; N Equals ln(7.35) = 1.995 logarithmic N = log(7.35) (7.35) To solve many chemical problems, logarithms and antilogarithms must be used.
Antilogarithms: How are they solved?The bases of logarithm and antilog are both 2.7183. Logarithms and antilogarithms with bases of 10 need be multiplied by 2.303 to create natural logarithms and antilogarithms.
How are the antilogarithm and log calculated?For both numbers, the base must be the same. Log b x y = p - q (= log b x - log b y is the outcome of taking logs on both sides. The inverse function of the difference in the two numbers' logarithms is what is used to divide them.
to know more about Antilogarithms visit:
https://brainly.com/question/28031444
#SPJ4
Al(s)→Al3+(aq)+3e−
Zn2+(aq)+2e−→Zn(s)
The half-reactions for the oxidation-reduction reaction between Al(s) and Zn2+(aq) are represented above. Based on the half-reactions, what is the coefficient for Al(s) if the equation for the oxidation-reduction reaction is balanced with the smallest whole-number coefficients?
2
To calculate the atoms of an element in a given molecule, we need to multiply stoichiometry by the number that is written on the foot of that element. Therefore, coefficient of Al in balanced equation is 2.
What is Balanced equation?Balanced equation is the one in which the total number of atoms of a species on reactant side is equal to the total number of atoms on product side. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, displacement reaction.
The other characteristic of balanced reaction is that physical state should be written with each compound or molecule on reactant and product side. Physical state should be written in brackets. s means solid, l means liquid, g means gas.
Al(s)→Al³⁺(aq)+3e⁻ × 2
Zn²⁺(aq)+2e⁻−→Zn(s) × 3
adding the two equations we get balanced equation as
2Al+3Zn²⁺→ 2Al³⁺ + 3Zn(s)
The coefficient of Al in balanced equation is 2.
Therefore, coefficient of Al in balanced equation is 2.
Learn more about the balanced equation, here:
https://brainly.com/question/7181548
#SPJ1
What is the pH of a solution that has the same number of hydrogen ions as hydroxide ions?; What is the pH of a solution that has equal concentrations of both hydrogen ions H +) and hydroxide ions OH -)?; What is the pH of a solution with a hydrogen ion?; At what pH does the hydrogen ion concentration equal the hydroxide ion concentration?
The substance or compound has a pH of 7 when it has the same number of hydrogen and hydroxide ions. The pH of pure water, which is 7, is considered to be neutral.
How acidic is a solution with the same quantity of hydrogen ions as hydroxide ions?The hydrogen ion concentration declines and the hydroxide ion concentration rises when pH rises (over 7.0). Both hydrogen ions and hydroxide ions are present in equal amounts when the pH is at 7.0.
When a solution has an equal number of hydrogen and hydroxide ions the solution is?Pure water is the substance that contains an equal number of hydrogen and hydroxyl ions. The quantity of hydrogen and hydroxide ions in pure water is typically comparable to other solvents. Since it is a neutral answer, it has been regarded as being applicable to all situations.
To know more about hydroxide ions visit :-
https://brainly.com/question/25883474
#SPJ4
A beam is being designed to work immersed in a heated fluid. The beam has to be strong enough to support a load and also be rigid enough so it does not deflect too much. Corrosion resistance is important, so the beam will be electroplated. Heat transfer characteristics are desired for heat dissipation. Five alternative materials have been suggested from which the choice will be made. a) Malleable C.I. ASTM 220 b) Gray C.I. ASTM A48 c) Steel ASTM A36 d) Al2024 T4
e) Al6061 T6
Five attributes have been identified, which are: a) Ultimate Strength Su (MPa)
b) Elastic Modulus E (GPa) c) Corrosion Resistance 3 =Good,2= Fair, 1=Poor. d) Heat Transfer Ability K(W/m⋅K)
e) Cost Dollars per Kg. Properties estimated for these five materials are as shown in Table 16. Determine the best material if supporting the weight (strength) is the number one priority followed by rigidity. Cost is more important than the heat transfer. Corrosion resistance is important but the cast iron and steel beams will be electroplated.
The use of ASTM B152 plate be in compliance with that ASME Code for process piping since it wouldn't bear the required heat transfer rate.
What steel type and ASTM designation is preferred for W-shapes?The correct answer is option A, that is ASTM E-119 test.They are Standard Test Methods for Fire Tests of Building Construction and Materials which have been approved for use by agencies of the Department of Defense.These test methods are intended to evaluate the duration for which the types of building elements contain a fire, retain their structural integrity, or exhibit both properties during a predetermined test exposure.It states that the performance of walls, columns, floors, and other building members under fire exposure conditions is an item of great importance in securing constructions that are safe, and that are not a menace to neighboring structures nor to the public.To control this it is necessary that the fire-resistive properties of materials and assemblies are measured and specified according to a standard expressed in terms that are applicable to a wide variety of materials, situations, and conditions of exposure.Such a standard is found in the ASTM E-119 test.To learn more about ASTM designation refer to:
https://brainly.com/question/12962787
#SPJ4
Which 2 elements will most likely form an ionic bond?; Which two elements will most likely form an ionic bond Click on the periodic table icon to view these elements Krypto?; Which elements will form an ionic bond with magnesium?; Which elements tend to form ionic bonds?
Questions and answers about ionic bonds
The ionic bond is a type of chemical bond that occurs from the attraction between oppositely charged ions.
Which two elements are most likely to form an ionic bond?The ionic bond is more likely to form between two elements with the same amount of charge but in opposite directions.
What elements will form an ionic bond with magnesium?The magnesium ion has two positive charges (+2), therefore, among the elements that ideally form an ionic bond with it are those that have a double negative charge (-2), for example, oxygen, thus forming rust of magnesium.
What elements tend to form ionic bonds?Metals and non-metals, because the former are elements with low ionization energy and the latter have high electronegativity and electron affinity.
Learn more about ionic bonds at https://brainly.com/question/11527546?referrer=searchResults
#SPJ4
Which of the following is not a result of special additives blended into the monomer liquid and polymer powders?
longer shelf life.
color stability.
maximum flexibility.
maximum durability.
The following is not a result of special additives blended into the monomer liquid and polymer powders is maximum flexibility.
A monomer is the molecule that will combine to another identical monomer and form the polymers. A monomer is the simplest unit of the polymer. A polymer is the natural or it can be synthetic substance that is composed of the very large molecules and is called as macromolecules. A polymer is composed of the repeating units. the additive blended to the monomer is not the results in the maximum flexibility.
Thus, the maximum flexibility is not a result of special additives blended into the monomer liquid and polymer powders
To learn more about monomer here
https://brainly.com/question/29765873
#SPJ4
Part A Cathodic protection of iron involves using another more reactive metal as a sacrificial anode. Classify each of the following metals by whether they would or would not act as a sacrificial anode to iron. Drag each item to the appropriate bin. View Available Hint(s) Reset Help Ag Mg Cu Pb Sn Zn Au Will act as sacrificial anode for iron Will not act as sacrificial anode for iron Submit Part B An old iron beam was coated with an unknown metal. There is a crack on the coating and it is observed that the iron is rusting at the fracture. The beam is in a structure that experiences high stress, resulting in frequent fractures to the coating. What was the old metal coating likely made of and what metal you would use to repair the fractures to avoid further corrosion? Drag each label to the appropriate target. View Available Hint(s) ResetHelp gold aluminum tin 1. The old coating was likely made of . 2. would be a good choice for repairing the fracture.
The material that act as sacrificial anode for iron Mg , Zn. that cannot acts as the sacrificial anode for iron Ag, Cu ,Pb, Sn, Au.
A Cathodic protection of iron involves using another more reactive metal as a sacrificial anode.
a) Ag = it cannot acts as the sacrificial anode for iron because in reactivity series the iron is above than the Ag. it is less reactive.
b) Mg = it can acts as the sacrificial anode for iron because in reactivity series the Ag is above than the iron. it is more reactive.
c) Cu = it cannot acts as the sacrificial anode for iron because in reactivity series the iron is above than the cu. it is less reactive.
d) Pb = it cannot acts as the sacrificial anode for iron because in reactivity series the iron is above than the cu. it is less reactive.
e) Sn = it cannot acts as the sacrificial anode for iron because in reactivity series the Ag is above than the iron. it is more reactive.
d) Zn = it can acts as the sacrificial anode for iron because in reactivity series the iron is above than the Ag. it is less reactive.
e) Au = it cannot acts as the sacrificial anode for iron because in reactivity series the Ag is above than the iron. it is more reactive.
To learn more about cathodic protection here
https://brainly.com/question/13031370
#SPJ4
foods we eat contain carbohydrates, proteins, and lipids that provide chemical energy. this chemical energy is eventually turned into
Foods that we eat contains carbohydrates, proteins and lipids that provide chemical energy. This chemical energy is eventually turned into thermal energy, kinetic energy and other forms of chemical energy.
The major constituents of food are carbohydrates, proteins and lipids. These serve as the fuel for the proper functioning of the body. The breakdown of these molecules inside our body by the process of digestion and transportation into the bloodstream helps in transforming the chemical energy stored in foods to kinetic, thermal and other forms of energy.
As a result of this transformation, human beings feel warm, can move and can perform their day-to-day activities.
To know more about chemical energy here
https://brainly.com/question/23405394
#SPJ4
which of the following statements correctly describe different types of mixtures? select all that apply. a) A heterogeneous mixture contains two or more different phases, b) A colloid is a type of solution, c) Differences in particle size account for the main differences between solutions and colloids. d) The phases of a heterogeneous mixture are always visibly distinct. e)The composition of any mixture is variable
These claims provide the clearest definition of the type of mixture in the statement;
A) Heterogeneous mixtures often contain two or more unique components.
D) In a heterogeneous combination, individual components may always be identified.
E) Any mixture's composition can change.
-NO, the fundamental distinctions between solutions and colloids are not caused by variations in particle size.
-The consistency of the mixture's particles makes the biggest difference.
-A heterogeneous solution called a colloidal solution has particles in it that are between the size of those in a real solution and those in a suspension solution.
Mixture:- A mixture is a material that results from the interaction of two or more substances without undergoing any chemical transformation.
Mixtures can roughly be divided into two types, these are Homogeneous Mixture and Heterogeneous Mixture
To know more about heterogenous mixtures : brainly.com/question/11670385
#SPJ4
A reaction involving element X occurs
via a second-order reaction at 400 K,
according to the rate law below.
Rate = 0.025 M-¹-min-¹[X]²
What is the value of the rate constant?
k = [ ? ] M-¹ · min-¹
(image below for more context)
The rate constant of the reaction is 0.025 M-¹-min-¹
What is a second order reaction?We know that a second order reaction is the kind of reaction in which the order of reaction depends on two molecules or that the rate of reaction depends on the concentration of a specie raised to power 2.
Given that the general formula for the second order rate law is;
Rate = K[X]^2
K = rate constant
[X] = concentration of X
This can now extrapolated to the reaction that we have here and this is a model that would give us the rate constant.
Learn more about reaction rate:https://brainly.com/question/8592296
#SPJ1
Why do chemical reactions occur at all?; What occurs during all chemical changes?; What causes a chemical change?; Do chemical changes occur everywhere?
When atoms establish or break chemical bonds, chemical processes take place. When bonds between molecules or atoms are created, disrupted, or both, chemical changes result.
Which four chemical substances are they?Covalent bonds hold together molecules, ionic bonds hold together ions, metallic bonds hold together intermetallic compounds, and coordinate covalent bonds hold coordination complexes together.
What constitutes a chemical?Each molecule with just an analytical grade is deemed to be a chemistry. So a chemical always has the same "stuff," to put it another way. Natural substances like water include certain compounds.
To know more about Chemicals visit:
https://brainly.com/question/13145357
#SPJ4
Write down an 2 examples of a single displacement reaction.
Explain the importance or uses of these chemical reactions in everyday activities of people. (PROVIDE MORE THAN ONCE SENTENCE)
Example:
Single replacement- 2K + 2H2O → 2KOH + H2
Potassium hydroxide is used in making soap, as an electrolyte in alkaline batteries and in electroplating, lithography, and paint and varnish removers. Medically, potassium hydroxide (KOH) is widely used in the wet mount preparation of various clinical specimens for microscopic visualization of fungi and fungal elements in skin, hair, nails, and even vaginal secretions
Example:
Single displacement- Zn + CuSO4 → ZnSO4 + Cu
This reaction is commonly used in the purification of copper, as the zinc ions in the reaction are less reactive than copper and will not dissolve in the sulfuric acid solution. The resulting copper can be easily separated from the zinc sulfate solution by electrolysis.
Single displacement- Al + CuCl2 → AlCl3 + Cu
This reaction is used in the production of aluminum chloride, which is a common starting material for the synthesis of a variety of compounds used in pharmaceuticals, fragrances, and other industrial applications. The aluminum chloride produced in this reaction can also be used as a catalyst in the production of polymers and in the refining of petroleum products.
based on the solubility rules, which one of these compounds is soluble in water? baso4 k2so4 pbso4 caso4 ag2so4
According to the solubility criteria, which divide solutes either highly soluble, sparingly soluble, and insoluble depending on how much of a chemical dissolves in a solvent, AgBr is one of these compounds that is
What are the GCSE rules for solubility?The amount of a substance that will dissolve at its greatest mass in such a given solvent volume at a specific temperature is known as its solubility. A high solubility indicates a substance to be particularly soluble. Low solubilities refer to substances that are either insoluble or just very little of them dissolve.
Which four solubility factors are there?The solubility of gases in liquids is significantly influenced by four different parameters. the liquid and gas's and the pressure's relative sizes, temperatures, and chemical reactions. Henry's law states that by increasing pressure, the gas in the liquid will often become more soluble.
To know more about solubility visit:
https://brainly.com/question/12978582
#SPJ4
Which of the following statements about the difference between ionic bonds and covalent bonds is true?
a. An ionic bond is stronger.
b. Electron sharing is more equal in the covalent bond.
c. An ionic bond occurs more often in aqueous solutions.
d. An ionic bond occurs only in acids.
e. A covalent bond occurs only in nonpolar molecules.
Two atoms share pairs of electrons to form lent bonds, which bind the Ionic bond refers to the bond that exists between these two ions.
What distinguishes an ionic link from a covalent bond?An atom can participate in covalent and ionic bonds, which are the two main types of bonds. By sharing electrons, two or more atoms can form covalent bonds. When two or more ions come together, their opposing charges hold them together to form ionic bonds.
Which bond is stronger and what distinguishes covalent from ionic bonds?Ionic bonds are typically far more powerful than covalent bonds. The complete transfer of electrons between the elements creates a stable molecule with ionic bonds.
To know more about Ionic bond visit :-
https://brainly.com/question/11527546
#SPJ4
What mass of ilmenite (in grams) is required if you wish to obtain 950 g of titanium?
299.65 g Ti mass of ilmenite (in grams) is required if you wish to obtain 950 g of titanium.
The molar mass of ilmenite is 151.71 g mol1.
This indicates that each mole of ilmenite will weigh 151.71 g.
One mole of ilmenite will also include one mole of iron, 1Fe, one mole of titanium, 1Ti, and three moles of oxygen, 3O, as you can see by looking at the compound's chemical formula.
Since the molar mass of titanium is 47.857 g mol 1, 151.71 g of ilmenite will contain 47.857 g of titanium. It implies that 950.0 g of ilmenite will contain
= 950 * 47.857 / 151.71
= 299.65 g Ti
if you acquire 47.857 g of titanium for every g of ilmenite.
To know more about ilmenite, visit:
https://brainly.com/question/1615612
#SPJ1
To get 950 g of titanium, you need a mass of ilmenite containing 299.65 g of titanium.
Ilmenite has a molar mass of 151.71 g mol1.
This suggests that ilmenite will weigh 151.71 g per mole.
As can be seen from the chemical formula of the compound, one mole of ilmenite will also include one mole of iron, 1Fe, one mole of titanium, 1Ti, and three moles of oxygen, 3O.
151.71 g of ilmenite will contain 47.857 g of titanium since titanium has a molar mass of 47.857 g mol 1. According to the statement, 950.0 g of ilmenite will
= 950 * 47.857 / 151.71
= 299.65 g Ti
if each gram of ilmenite yields 47.857 grams of titanium.
To learn more about ilmenite:
brainly.com/question/1615612
#SPJ1
aqueous sodium bromide reacts with chlorine gas to produce aqueous sodium chloride and liquid bromine
Chlorine gas and aqueous sodium bromide react to generate liquid bromine and aqueous sodium chloride.
What happens when chlorine and sodium bromide interact?Chlorine (in the form of a gas or dissolved in water) replaces bromine when added to sodium bromide solution. Chlorine replaces bromine in sodium bromide because it is more reactive than bromine. The solution darkens. The displaced bromine is responsible for this brown color.
Several compounds are created when bromine and chlorine combine. Bromide and hydrogen chloride are produced when bromine and chlorine combine. Bromine reacts with chlorine to form chlorides like hypochlorite and chlorite. These reactions can also happen spontaneously and are used in industrial operations.
Learn more about liquid bromine refer
https://brainly.com/question/25731714
#SPJ4
for the following molecule, the hydrogens having the largest chemical shift are labelled (a, b, c, or d?) Cl-CH2-CH2-CH2-CH3a- b- c- d-
The strongest chemical shift will occur in the hydrogens nearest to the chlorine (furthest to the left in the spectrum). Thus in this question a labelled hydrogen will have a chemical shift.
Chemical shift is defined as the difference between the signal from the reference molecule and the resonant frequency of the spinning protons. One of the most significant characteristics that can be used to determine molecular structure is nuclear magnetic resonance chemical change.
Different chemical shifts are primarily brought on by two factors: (a) deshielding brought on by reduced electron density (due to electronegative atoms), and (b) anisotropy (due to bonds). The signals are split into (n+1) lines due to coupling, which is caused by the presence of "n" other equivalent H atoms nearby.
For more information on chemical shift kindly visit to
https://brainly.com/question/14788457
#SPJ4
Select the electron configurations for
(a) Co3+
[Ar]3d5
[Ar]3d6
[Ar]3d7
[Ar]4s13d5
[Ar]4s13d6
[Ar]4s13d7
[Ar]4s23d4
[Ar]4s23d5
[Ar]4s23d6
(b) Cu2+
[Ar]3d8
[Ar]3d9
[Ar]3d10
[Ar]4s13d8
[Ar]4s13d9
[Ar]4s13d10
[Ar]4s23d8
[Ar]4s23d9
[Ar]4s23d10
(c) Ag+
[Kr]4d8
[Kr]4d9
[Kr]4d10
[Kr]5s14d8
[Kr]5s14d9
[Kr]5s14d10
[Kr]5s24d8
[Kr]5s24d9
[Kr]5s24d10
A Co3+ ion has the ground-state electron configuration 1s2 2s2 2p6 3s2 3p6 3d6.
Cu2+ has the electronic structure [Ar]3d9.
A Ag+ ion's electron configuration would be [Kr]4d10.
How is the electron configuration determined?The shell number (n), kind of orbital, and superscript indicating the number of electrons in the orbital are the first three symbols used to represent the electron configuration. On the periodic chart, for instance, you can see that oxygen has eight electrons.
Which three electron configuration rules apply?When writing electrical setup, there are three rules to follow: the Aufbau idea. The Pauli exclusion rule. Hound's Law.
To know more about electron configuration visit:-
https://brainly.com/question/14283892
#SPJ4
Answer:
A
Explanation:
This term is used to describe the molecules that are being studied in a thermodynamic reaction.
-System
-Surrounding
-Container
-Vessel
The term used to describe the molecules that are being studied in a thermodynamic reaction is system.
Thermodynamics refers to the study of the relations between heat, work, temperature, and energy. The laws of thermodynamics define the way energy in a system change and whether the system can perform useful work on its surroundings. Thermodynamic reaction or control is a reaction in which the product ratio is determined by the relative stability of the products. Thermodynamic stability occurs when a system is in its lowest energy state, or in chemical equilibrium with its environment. Hence, thermodynamic studies study molecules within a system.
Learn more about Thermodynamics:
https://brainly.com/question/18056998
#SPJ4
for this reaction it was observed that the first three half-lives were 12.5 h, 25 h, and 50 h when a
Concentration of A after 50 hours = 0.1013 M.
Given that initial concentration of A = 1.621 M
After first half life is after 12.5 hours, concentration is reduced to 0.8105 M.
Concentration of A after 12.5 hours is 0.8105 M
After second half life ( ie 25 hours = 2*12.5 h), concentration of A is reduced to 0.4053 M
After 3rd half life (ie 37.5 hours = 3*12.5 hours) , concentration of A is reduced to 0.2026 M ( Half of 0.4053 M)
Therefore Concentration of A after 50 hours = 0.2026 M
After 4th half life (ie 50 hours = 4*12.5 hours), concentration of A is reduced to 0.1013 M ( Half of 0.2026 M)
Therefore concentration of A after 50 hours = 0.1013 M.
Concentration is the ratio of a constituent's abundance to the mixture's overall volume. The concentration can refer to any form of chemical mixture, but is most usually used to describe the solutes and solvents in solutions. There are several different types of mathematical descriptions: mass concentration, molar concentration, number concentration, and volume concentration.
Learn more about Concentration here:
https://brainly.com/question/23204201
#SPJ4
g draw all possible stereoisomers of stilbene dibromide, making sure to draw each stereoisomer only once. id all pairs of enantiomers and any meso compounds. assign r/s configuration to all stereocenters on your drawings.
Stilbene dibromide includes (1R,2S)-1,2-dibromo-1,2-diphenylethane, (1R,2R)-1,2-dibromo-1,2-diphenylethane, (1S,2S)- It has three stereoisomers. 1,2-dibromo-1,2-diphenylethane.
Bromination of trans-stilbene primarily yields meso-1,2-dibromo-1,2-diphenylethane. Electrophilic bromine addition reaction. Stilbenes can exist as both trans and cis stereoisomers, but they naturally occur predominantly as the trans isomer due to their greater thermodynamic stability compared to the cis isomer.
If a molecule has two stereocenters there should be four possible stereoisomers. If a molecule has 3 stereocenters, there should be up to 8 stereoisomers. Therefore, the maximum number of stereoisomers for a given configuration is 2n. where n is the number of chiral centers.
Learn more about Stilbene dibromide here:-https://brainly.com/question/15146761
#SPJ4
What element has 15 protons and neutrons?; What is the name and symbol of an element that contains 15 protons?; What is the symbol for an atom containing 20 protons and 20 neutrons?; What element usually has 20 neutrons?
Phosphorus is a chemical element with the symbol P and atomic number 15, and it has 15 protons and neutrons. The atom of calcium has 20 neutrons and is represented by the symbol Ca.
A stable subatomic particle known as a protons has the symbol p, H+, or 1H+ having a positive electric charge of +1 e elementary charge. It has a mass that is 1,836 times greater than that of an electron and slightly less than that of a neutron (the proton–electron mass ratio). Nucleons are a collective term for protons and neutrons, each of which have masses of roughly one atomic mass unit (particles present in atomic nuclei).
Each atom's nucleus contains one or more protons. They supply the primary electric force that attracts and holds the atomic electrons together. The defining characteristic of an element, known as the atomic number, is the number of protons in the nucleus (represented by the symbol Z).
Learn more about protons here:
https://brainly.com/question/14604678
#SPJ4
which of the following pairs of substances would you expect to form homogeneous solutions when combined? (a) CCl4 and H2O (b) KCl and H2O (c) Br2 and (d)CCl4
Solutions that are homogeneous have a constant composition and set of characteristics. For instance, a cup of coffee, cologne, cough syrup, a salt- or sugar-water solution, etc.
Since cement, water, and numerous other additives are included in concrete, it serves as an illustration of a heterogeneous mixture. As a result, it is not expected that concrete will have a consistent composition throughout. As a result, choice (a) is correct.
Learn more about the homogeneous
https://brainly.com/question/18363850
#SPJ4
which refers to a measure of how acidic or basic a solution is? ph solubility reactiveness hardness; which solution has the greatest number of hydroxide ions?; which is formed by positive ions from a base and negative ions from an acid?; which product contains a strong base that would most likely completely dissolve in water?; a solution has a ph of 8. which best describes the solution?; which best describes the ph scale?; which is the order of these solutions from strong acid to strong base?; carla is using a fertilizer that contains nitric acid. how is nitric acid classified?
The pH scale determines how acidic or basic water is. The range is 0 to 14, with 7 representing neutrality. pH values below 7 indicate acidity, whereas those over 7 suggest a base (a result of a chemical interaction
Examples of chemical reactions and what they are.Reactants engage in a chemical reaction during a chemical reaction, which results in the transformation of reactants into products. for instance Inhaling oxygen causes glucose to react, producing carbon dioxide, water, and energy. This is the process of respiration.
In simple terms, what exactly is a chemical reaction?chemical reaction: a process wherein one or more substances—the reactants—are changed into one or more additional substances—the products. Chemical elements and compounds are both substances.
To know more about chemical reaction visit:
https://brainly.com/question/3461108
#SPJ4
___ moles of soap are formed per mole of glycerol in a complete saponification reaction which results in a charged product, the salt of a fatty acid because of ___.1. Three; the low pH of the solution in which the reaction takes place2. One; the basic solution in which the reaction takes place3. Three; the basic solution in which the reaction takes place4. One; the low pH of the solution in which the reaction takes place
Alcohol and soap are created when an ester reacts with an inorganic base during saponification. Typically, it happens when triglycerides react with potassium or sodium hydroxide (lye) to create soap, which is a mixture of glycerol and fatty acid salt.
In a process called saponification, which creates long-chain fatty acid salts and glycerol as a byproduct rather than water and salt as in an acid/base reaction. Alkaline hydrolysis of esters is the term for it.
Learn more about saponification,
https://brainly.com/question/2263502
#SPJ4
A) Provide a complete mechanism for the above Friedel-Crafts Reaction. Pay close attention to details, including lone pairs, formal charges and the use of curved arrows.
The Lewis acid and the chlorine atom of the acid chloride form a complex during the Friedel-Crafts acylation reaction. Cleaving the complex's C-Cl bond produces an acylium ion. The acylium ion is resonance stabilized and has a positive charge on the carbon atom.
The term "Friedel-Crafts Alkylation" describes the substitution of an alkyl group for an aromatic proton. This is accomplished by using a carbocation to conduct an electrophilic attack on the aromatic ring. Alkyl halides are used as reactants in the Friedel-Crafts alkylation reaction, which produces alkylbenzenes.
Learn more about the Friedel-Crafts acylation,
https://brainly.com/question/27178599
#SPJ4
