The option that is NOT a type of cable used in wired networks is option D) Router cable.
What kind of cable is used by a router?Using an Ethernet cable, join your modem to your router. The majority of routers contain many Ethernet ports, however there is one designated for connecting directly to the modem that is marked "Internet" or "WAN" (wide area network). Usually, it isn't the same color as the other Ethernet ports.
The three most common types of network cables used in communication systems are coaxial cable, fiber optic cable, and twisted pair cable.
Therefore, one can affirm that the correct option is D.
Learn more about Router cable from
https://brainly.com/question/28321001
#SPJ1
explain the security implications of embedded and specialized systems.
Embedded systems, which use computer technology to accomplish a specific function in commonplace equipment, present a special set of difficulties.
What is Embedded systems?Embedded systems, which use computer technology to accomplish a specific function in commonplace equipment, present a special set of difficulties. Candidates will need to show their understanding of how embedded systems affect security on the CompTIA Security+ test.Many of the security issues faced by embedded systems are similar, but each type of system adds a new level of complexity and special characteristics. Because the security threats were unknown for a long time, manufacturers didn't pay much attention to the security of embedded systems.Security, however, is frequently neglected, even for more modern gadgets. The fact that these gadgets are compact and adding security would reduce usefulness is a big factor driving this trend.Specialized systems, which comprised automated and embedded controllers, are becoming common place among the general consumer.To learn more about Embedded systems refer to:
https://brainly.com/question/28312738
#SPJ4
clients are able to exchange signals with satellites as long as they have a ____ path.
Clients are able to exchange signals with satellites as long as they have a line-of-sight path.
What is a satellite?An object that has been purposefully placed into orbit in space is known as a satellite or artificial satellite. Most satellites, with the exception of passive satellites, have a means of generating electricity for the equipment they contain, such as solar panels or radioisotope thermoelectric generators (RTGs).
The majority of satellites also have transponders, which are a type of ground station communication. The most common satellites, tiny CubeSats, use a standardized bus to reduce costs and labor.
Satellites of the same type can cooperate with one another to form constellations. Satellites are made to be as light and durable as possible due to the high launch costs to space. The majority of communication satellites are radio relay stations in orbit that house dozens of transponders, each with a bandwidth of tens of megahertz.
Learn more about satellites
https://brainly.com/question/28103637
#SPJ4
you are asked to interpret the 12-lead ecg of a patient presenting with non-specific, sub-sternal chest pain. you note in your interpretation that the patient has st depression of 0.6 mm in 3 contiguous leads. based off this identification, you classify the patient into what st-segment group under the acute coronary syndromes algorithm?
Based on the information provided, it is not possible to accurately classify the patient into a specific group under the acute coronary syndromes algorithm.
Why it is not possible to accurately classify the patient into a specific group under the acute coronary syndromes algorithm?The ST-segment depression of 0.6 mm in 3 contiguous leads is a finding on the patient's 12-lead ECG, but additional information is needed to accurately classify the patient's condition.
The acute coronary syndromes algorithm is a tool used to assess patients with symptoms suggestive of acute coronary syndrome, which includes conditions such as unstable angina and myocardial infarction (heart attack).
The algorithm is based on several factors, including the patient's symptoms, ECG findings, and laboratory test results.
In order to accurately classify the patient into a specific group under the acute coronary syndromes algorithm, the healthcare provider would need to assess the patient's complete medical history and evaluate other factors, such as the patient's risk factors for coronary artery disease, the presence of other ECG abnormalities, and the results of laboratory tests.
It is important to note that the classification of a patient into a specific group under the acute coronary syndromes algorithm is only one aspect of the overall assessment and management of the patient's condition, and should not be considered in isolation.
To Know More About syndromes algorithm, Check Out
https://brainly.com/question/13175441
#SPJ4
Which of the following is likely to be a consequence of cloud computing in the future?
Organizations will prefer to setup their own computing infrastructure.
The cost of obtaining elastic resources will decrease.
The number of technology-based startups will stagnate.
Jobs related to server operations at small organizations will increase.
The consequence of cloud computing in the future is the cost of obtaining elastic resources will decrease.
What is cloud computing?Cloud computing is the provision of computer system resources, especially data storage (cloud storage) and computing power, on demand, without direct and active management by the user. Large clouds often have functions spread across multiple locations, each of which is a data center. Cloud computing relies on sharing resources to achieve consistency and typically uses a pay-as-you-go model. This helps reduce capital costs, but can also result in unexpected operating costs for users.
Learn more about cloud computing https://brainly.com/question/19057393
#SPJ4
what version of ethernet utilizes a fiber-optic cable and has a transmission speed of 100 mbps?
The version of ethernet utilizes a fiber-optic cable and has a transmission speed of 100 mbps is 100BaseFX
What is meant by transmission speed ?Transmission speed is the pace at which data is transported between two sites, measured in kilobytes per second (Kbps) or megabytes per second (Mbps).
The amount of data communicated over a transmission channel or through a data interface in a certain amount of time is referred to as the data transmission rate. Baud or bits/s are the units used for this.
The two methods for transmitting data between digital devices are serial and parallel. A single channel is used to serially transfer data bits one after the other. Multiple data bits are sent simultaneously over several channels during parallel data transfer.
To learn more about transmission speed refer to :
https://brainly.com/question/13013855
#SPJ1
escape (or back door) in application i/o interface a) allows a user to interrupt a device at any time. b) allows access to a few additional devices, such as a time-of-day clock and a timer. c) transparently passes arbitrary commands from an application to a device driver. d) enables managing of devices with widely varying speeds ranging from a few bytes per second to gigabytes per second.
The correct option c) transparently passes arbitrary commands from an application to a device driver, for the escape (or back door) in application i/o interface.
Explain the term escape (or back door)?A backdoor is a method of gaining access to a computer network or encrypted data bypassing the system's usual security safeguards.
A backdoor may be established by a developer to allow access to an operating system or program for troubleshooting or even other uses. However, as parts of an exploit, attackers frequently employ backdoors that they find or put in place. A worm or virus may occasionally be built to exploit a backdoor left open by such an earlier attack.A backdoor poses a security risk since threat actors are constantly searching for vulnerabilities to exploit, regardless of whether it is installed as a simple services, a means of attack, or as a method allowing the state to access encrypted data.As a result, the application i/o interface's escape (or back door) allows for the seamless passage of arbitrary commands from an application to a device driver.
To know more about the i/o interface, here
https://brainly.com/question/29346158
#SPJ4
the way a network is designed to communicate is known as its ____.
The way a network is designed to communicate is known as its topology
Topology is the physical or logical layout of a network, which determines how data is transmitted between nodes. It defines the connections between nodes and the type of media used to transmit data. Common topologies include bus, star, ring, and mesh. Bus topology is a linear arrangement of nodes connected by a single cable.
Star topology is a centralized arrangement of nodes connected to a central hub. Ring topology is a circular arrangement of nodes connected in a loop. Mesh topology is a decentralized arrangement of nodes connected to each other in a web-like structure. Each topology has its own advantages and disadvantages, and the choice of which topology to use depends on the network's requirements.
For more questions like Topology click the link below:
https://brainly.com/question/13186238
#SPJ4
Which statement correctly compares Word Online and Word?
Answer: State and earth
Explanation:
a security clearance is a component of a data classification scheme that assigns a status level to systems to designate the maximum level of classified data that may be stored on it. false true
The given statement "a security clearance is a part of a data categorization scheme that gives systems a status level in order to specify the highest level of classified material that can be stored on it" is FALSE.
What is a security clearance?After passing a rigorous background check, individuals are given the status of having access to restricted locations or to classified information (state or organizational secrets).
The phrase "security clearance" is also occasionally used in private businesses that follow a systematic procedure to screen applicants for access to confidential data.
A security clearance is not a component of the data classification system that assigns systems a status level to indicate the greatest level of classified data that can be kept on them.
In most cases, a clearance is not enough to grant access; the organization must additionally decide that the cleared person needs to know a certain amount of information.
No one should be given automatic access to classified material due to their position, rank, or security clearance.
Therefore, the given statement "a security clearance is a part of a data categorization scheme that gives systems a status level in order to specify the highest level of classified material that can be stored on it" is FALSE.
Know more about security clearance here:
https://brainly.com/question/25720881
#SPJ4
what must be set on the destination machines if you put their ip addresses in /etc/ansible/hosts file?
This file's default location is /etc/ansible/hosts. Using the -i path> option on the command line or inventory in configuration, you can select a different inventory file.
By default, Ansible uses the user name you are logged in as on the control node to connect to all remote devices. You can choose a different user name for the connection if that one doesn't already exist on the remote device. Check out Understanding Privilege Escalation: A Guide if you only need to perform a few actions as a different user. become. The inventory file's default location is /etc/ansible/hosts. Alternative locations can be used to produce project-specific inventory files. The inventory file can include a list of specific hosts or user-defined host groups.
Learn more about command here-
https://brainly.com/question/18955190
#SPJ4
once you define a page ____, it can be applied to any grouping element in your document.
Once you define a page style, it can be applied to any grouping element in your document.
In the context of graphic design, page style refers to the way of placing and arranging text, images, and other graphics on a software page in order to produce documents such as brochures, newsletters, and books or to attract readership to a website. Page style provides a resource where all the design elements and rules for a web page are kept. Page style comprises graphic elements, color scheme, typography, and general formatting for developers to reference and follow for a cohesive website composition.
You can learn more about page style at
https://brainly.com/question/8508046
#SPJ4
Write an expression that evaluates to True if the str associated with s starts with "p". Test your expression with two different strings. In test 1, 5 = "parameter"
Expression that evaluates to True is s[0]=="p"
A "statement," which is just a single unit of execution and returns nothing, is different from a "expression," which is a mixture of values and functions that are combined and processed by the compiler to create a new value.
def prob6(s):
return True if s[0]=="p" else False # check fisrt letter
print(prob6("parameter"))
print(prob6("Parameter"))
def prob7(s):
return True if s[-3:]=="ism" else False # check last 4 letters
print(prob7("capitalism"))
print(prob7("religion"))
def prob9(s):
s=s.split(",")[0] # split with comma and pick the first word
return s
print(prob9("Hello, world"))
def prob10(x,s):
return (x+int(s)) # convert into integer and add
print(prob10(10,"5"))
To learn more about the expression
https://brainly.com/question/14083225
#SPJ4
writing a method with the exact same method header (which includes the parameters) as a parent class is called overriding.
True Trying to override is the act of creating another procedure with the precise same method connector includes the parameters—as a parent class.
Overriding explain: What is it?
In any object-oriented computer program, overloading seems to be a function that calls for such a subdivision or child class to supply a multitude of method implementations that are already supplied by one of their improved education or parent classes.
What does whoops' function overriding mean?
Function overriding is the process of redefining a base class function in some kind of a class definition that retains the same identifier, return type, but instead parameters but a different definition.
To know more about overriding visit:
https://brainly.com/question/13326670
#SPJ4
assume that you are implementing an isr of a device driver in mips assembly language. you are targeting 32-bit mips processor (the one you have been taught in class). what will be the maximum frame size in bytes of this isr?
It is typically only used in situations where a high level language (likely C, if you want to call it that) cannot perform the necessary task.
That could involve using a strange addressing mode, using CPU registers, managing interrupts in a unique fashion, or in some cases, speed. When portability is not a concern, it makes sense to code in assembly because it is sometimes just simpler to do so. There is no specific need for you to communicate with home automation equipment that has been specifically installed in your home to carry out these tasks. There is probably a high level API for communicating with it.
Learn more about perform here-
https://brainly.com/question/29508805
#SPJ4
a user calls to report a problem. she is trying to install an application on her new windows 11 system, but the installation will not proceed. her user account is a member of the users group. what is most likely causing the installation issue?
To reduce the risks of unauthorized actions or unintentional software installations, User Account Control (UAC) asks the user for credentials or permissions.
UAC prompts are what they sound like.To reduce the risks of unauthorized actions or unintentional software installations, User Account Control (UAC) asks the user for credentials or permissions.In the System Configuration Utility tool, you have the option to choose between Normal startup, Diagnostic startup, or Selective startup (Msconfig.exe). When you restart your computer, the option you selected—Normal startup—may change to Selective startup.Files and folders gathered into a single logical folder by special folders, which may be kept both locally and on a network.To learn more about User Account Control (UAC) refer to:
https://brainly.com/question/28873445
#SPJ4
Which of the following is not a best practice for firewall changes? a. Ensure changes are evaluated by all relevant stakeholders b.Have a backout plan in case changes do not go according to plan c. Cleanup firewall rules perigdically to reduce the network attack surface d.Test before implementing
Cleanup firewall rules periodically to reduce the network attack surface.
Firewall rules permit business-fundamental traffic to travel through the network and block dangerous traffic from entering. This command over the web traffic going to and from the organization's network guarantees network security. The standard set ought to be solid and shouldn't contain any escape clauses.
Unused rules structure a significant escape clause and are simple for aggressors to take advantage of. An unused rule is essentially as terrible as a feeble rule. Unused rules are strange essentially. Any oddity in the standard set can make the whole network defenseless.
The firewall cleanup process includes two stages. The initial step is to distinguish the unused rules, and the following stage is to eliminate unused firewall rules. To do this you really want a productive firewall policy cleanup tool. Tidy up firewall rules to make your standard set more grounded by basically eliminating any unused rules.
to know more about network security click here:
https://brainly.com/question/28581015
#SPJ4
what are two valid steps in the six step troubleshooting method discussed in this chapter?
The two valid steps in the six-step troubleshooting method are establishing a theory and documenting outcomes.
A mature theory with established validity boundaries is referred to as an established theory. Thus, such theories' approximative truth acquires a quantitative component. Established theories are safeguarded by their validity restrictions, thus superseding theories cannot refute them.
The document that describes and specifies the metrics for the expected results of this Work Order is referred to as the Outcome Document. It was created by the parties and approved in writing by both QCSI and the Customer. Changes in relationships, knowledge, awareness, capacities, attitudes, and/or behaviors may be reflected in them.
To learn more about troubleshooting methods
https://brainly.com/question/9057330
#SPJ4
leon started a project to design and create a new video game for the animation studio where he develops graphics and animations for video games and movies. which item below would be considered an overhead cost?
An overhead cost is a type of indirect cost that is not directly related to the production of goods or services.
What are leon's overhead costs?In the context of a video game project, some examples of overhead costs could include rent for the office space where the project is being developed, utilities for the office, salaries for administrative staff, and insurance for the project.
These costs are not directly related to the design and creation of the video game, but are necessary for the project to be completed.
To Know More About overhead costs, Check Out
https://brainly.com/question/20480458
#SPJ4
What are two potential network problems that can result from ARP operation? (Choose two)? * 2 points Attackers can respond to requests and pretend to be providers of services. Manually configuring static ARP associations could facilitate ARP poisoning or MAC address spoofing Multiple ARP replies result in the switch MAC address table containing entries that match the MAC addresses of hosts that are connected to the relevant switch port. ARP requests can flood the local segment if a large number of devices were to be powered up and all start accessing network services at the same time.
The two potential network problems that can result from ARP operation is the first and the fourth option.
The attackers can manipulate IP and MAC addresses in ARP network so the attackers can pretend as service providers and respond to requests.
The configuring static ARP association manually can prevent facilitate ARP poisoning not facilitate ARP poisoning or MAC address spoofing.
The potential problem in third option is not caused by ARP operation so its not potential network problems of ARP operation.
The multiply ARP request at the same time will caused delays in data communication even if only momentary. This will make potential problem in ARP operation.
You question is incomplete, but most probably your full question was
(image attached)
Learn more about ARP here:
brainly.com/question/12976506
#SPJ4
a bubble sort is being used to arrange the following set of numbers in ascending order: 8 6 4 9 3 7 after the first pass of the sort is completed, what order will the data be in?
The data will be in the order: 6 4 8 3 7 9
What is a bubble sort example?
A real-world example of a bubble sort algorithm is how the contact list on your phone is sorted in alphabetical order. Or the sorting of files on your phone according to the time they were added.
Why bubble sort is used?
In computer graphics, bubble sort is popular for its capability to detect a very small error (like a swap of just two elements) in almost-sorted arrays and fix it with just linear complexity (2n).
What is the formula for bubble sort?
Bubble sort may require (n/2) passes and O(n) comparisons for each pass in the average case. As a result, the average case time complexity of bubble sort is O(n/2 x n) = O(n/2 x n) = O(n/2 x n) = O(n/2 x n) = O (n2).
Why is bubble sort less efficient?
Bubble Sort is one of the most widely discussed algorithms, simply because of its lack of efficiency for sorting arrays. If an array is already sorted, Bubble Sort will only pass through the array once (using concept two below), however, the worst-case scenario is a run time of O(N²), which is extremely inefficient.
Thus, the correct order is 6 4 8 3 7 9
To know more about bubble sort:
https://brainly.com/question/13161938
#SPJ4
encapsulation and protocol headers, decapsulation, and reassembly are three of the four basic techniques used whenever different layers of protocols work together. what is the fourth?
Segmentation is the solution. The Internet Protocol (IP) is a network layer protocol, and the Transmission Control Protocol (TCP) is a transport layer protocol.
The higher levels of the paradigm, such as session, presentation, and application, are those that deal with user interaction and network-based application implementation. Network latency, often known as lag, is the word used to characterize delays in network communication. It is better to think about it in terms of networking as the time it takes for a packet of data to pass through numerous devices before being received at its destination and decoded.
Learn more about network here-
https://brainly.com/question/14276789
#SPJ4
Which of the following is a cloud computing deployment model in which the cloud infrastructure is provisioned for open use by the general public?
Hybrid cloud
Private cloud
Community cloud
Public cloud
According to NIST, the cloud infrastructure is made available for public use. It could be owned, run, and managed by a company, university, or government agency.
What are the four 4 deployment models in cloud computing?Public, private, communal, and hybrid cloud deployment types are available. Depending on where the environment's infrastructure is located, each deployment model is established. A single corporation with numerous users can only use the cloud infrastructure designated as PRIVATE CLOUD (e.g., business units). It could be on or off premises, and it could be owned, managed, and run by the company, a different entity, or a mix of them.
Platforms-as-a-Service (PaaS), Infrastructure-as-a-Service (IaaS), and Software-as-a-Service are the other three primary categories of cloud computing services (SaaS). individual cloud. Because it is a dedicated environment for a single business or organization, the private cloud deployment model differs from the public cloud deployment paradigm. Resources and hardware are not shared with companies outside of your own.
Therefore the correct answer is public cloud.
To learn more about Public cloud refer to :
https://brainly.com/question/19057393
#SPJ4
which command allows you to change the size of an object, where the x and y scale factors change equally?
One of the most commonly used tools in AutoCAD is the scaling function. You can resize lines, polylines, and shapes. Typically used to increase or decrease the size of an object through multiplication and division.
What is the purpose of the scale() function?
The scale() function in the R language is a generic function that centers and scales the columns of numeric matrices. The middle parameter takes either a vector of equal numbers or a logical value. If a numeric vector is given, each column of the matrix will have the corresponding value subtracted from the center.
What are the three scaling methods?
Here we consider three variations of his one-dimensional scaling method.
Thurston or Equal Occurrence Scaling.
Likert or "total" scaling.
Guttman or "cumulative" scaling.
To know more about scaling function visit;
https://brainly.com/question/13819784
#SPJ4
a service provider has terminated a t1 link to a mid-sized company using the t-carrier system. after patching from where the service provider terminated their connection, where would the customer connect for connectivity?
A service provider terminated a t1 link to a mid-sized company using the t-carrier system. After patching from where the service provider terminated their connection the customer will now connect to DSU for connectivity.
Give a brief account on CSU / DSU.The name "CSU/DSU" refers to a digital interface device that joins data terminal equipment (DTE), such as a router, to a digital circuit, like a Digital Signal 1 (DS1) T1 line. Two distinct tasks are carried out by the CSU/DSU. The data service unit (DSU) is in charge of managing the interface with the DTE, while the channel service unit (CSU) is in charge of managing the link to the communications network. A CSU/DSU may include an external connection point or may be built into a router's modular card.
The modem for a whole LAN is the equivalent of a CSU/DSU. The DCE, which is frequently a modem or CSU/DSU, transforms user data from the DTE into a format compatible with the WAN service provider transmission link.
To know more about, cable termination, visit :
https://brainly.com/question/14533633
#SPJ1
for a 4096 byte byte-addressable memory system that is 64-way high-order interleaved, what is the size of the module number field in memory address ?
The size of the module number field in the memory address is 6 bits.
Define memory address.
A memory address is a reference to a particular memory region used by hardware and software at different levels in computing.
Memory addresses are fixed-length digit sequences that are often represented and used as unsigned integers. A device or CPU can track data using a memory address, which is a special identification.
The CPU can track the location of each memory byte thanks to this binary address, which is determined by an ordered and finite sequence.
Solution Explained:
A physical address is 12 bits long since the capacity of the memory is 4096 bytes or 212 bytes.
Currently, there are 64 (= 26) interleaved memory chips, modules, and hierarchies. In order to choose the appropriate memory module, chip, or hierarchy, the higher 6 bits of the physical address will be needed.
Decimal bits for module offset
= 12 - 6
= 6 bits
To learn more about a memory address, use the link given
https://brainly.com/question/12905680
#SPJ4
I want to run a survey across my team so as to gather their preferences on working hours. What should I do? O Reach out to your unit/function Business Privacy Lead and to your unit/function's HR O Draft the sample questions and start obtaining responses, as you are the team lead and have full right to access any PI of your team members Instead of running a survey on digitized portal, call each associate and document all preferences and other PI in your notebook O Reach out to a team member and hand over a sheet to him to draft everyone's responses on that sheet SUBMIT NEXT
The first step should be to reach out to the unit/function Business Privacy Lead and to the unit/function's HR.
The Importance of Respecting Privacy Rights When Conducting Team SurveysWhen it comes to running a survey across a team, it is important to ensure that all necessary steps are taken to ensure that all privacy rights are respected.
Therefore, the first step should be to reach out to the unit/function Business Privacy Lead and to the unit/function's HR.This will help to ensure that any survey is conducted in accordance with the relevant privacy legislation.
Once the necessary legal steps have been taken, the next step should be to draft sample questions for the survey.This should be done in such a way as to cover all relevant topics and ensure that the survey captures all of the team members' preferences. It is also important to ensure that the questions are formulated in a way that will allow the survey to be completed quickly and efficiently.
Once the survey questions have been drafted, the next step should be to start obtaining responses.This can be done in various ways, such as by calling each team member individually and recording their responses in a notebook, by handing out a sheet to a team member to fill in everyone's responses, or by using a digitized portal to collect the responses.
Learn more about survey at: https://brainly.com/question/14610641
#SPJ4
the initial host state property controls how the nlb service behaves when the os boots.
The initial host state property controls on how the NLB service behaves when OS boots. (True)
What is NLB?In the Open Systems Interconnection (OSI) model, a network load balancer (NLB) operates at layer four. A billion requests can be processed every second. A target is chosen from the target group for the default rule after the load balancer receives a connection request. It tries to establish a TCP connection to the selected target on the port specified in the listener configuration.
When you enable an Availability Zone for the load balancer, Elastic Load Balancing establishes a load balancer node there. By default, every load balancer node only distributes traffic among the registered targets in its Availability Zone. In the event that cross-zone load balancing is enabled, each load balancer node splits traffic among the registered targets in each enabled Availability Zone.
Learn more about load balancer
https://brainly.com/question/29431580
#SPJ4
quick sort is being used with data[0] as the split value. what is the state of the array when the first recursive call is made?
An array is a group of related data elements kept in close proximity to one another in memory.
What is array?In most programming situations, a significant volume of data of a similar type must be stored.
To store this much data, we must define a lot of variables.
It would be very difficult to remember every variable name while coding the scripts. It is preferable to define an array and keep all the elements inside of it.
In a two-dimensional array, we can access the individual cells by utilizing their indices, much like in a one-dimensional array where data can be retrieved using simply an index.
A single cell has two indices: one is the row number and the other is the column number.
Hence, An array is a group of related data elements kept in close proximity to one another in memory.
learn more about arrays click here:
https://brainly.com/question/28061186
#SPJ4
perform the following addition of fixed-point binary operands using the binary addition algorithm. assume that the binary point is fixed in the middle of each group of four bits. 0010 0011 ------- what value does the first operand represent? (write the answer in decimal) what value does the second operand represent? (write the answer in decimal) what is the 4-bit pattern of the sum? (write the answer as four bits) what value does the sum represent? (write the answer in decimal)
Part a: value of first operand; 0.5.
Part b: value of the second operand 0.75.
Part c: 4-bit pattern of the sum 0101.
Part d: value of sum represent 1.25.
Explain the term binary operands?An operator known as a binary operator manipulates two operands to get a result.
Operators offer a simple method for evaluating numerical values and character strings and are expressed by special characters or through keywords. Those operators that only accept two operands are known as binary operators. A typical binary expression is a + b, which has the addition operator (+) and two operands. Arithmetic, relational, logical, or assignment operators are additional divisions of the binary operators.For the given group of four bits. 0010 0011-
Part a: value of first operand; 0.5.
Part b: value of the second operand 0.75.
Part c: 4-bit pattern of the sum 0101.
Part d: value of sum represent 1.25.
To know more about the binary operands, here
https://brainly.com/question/26891746
#SPJ4
What is strFirst?
def username (strFirst, strLast):
return strFirst + strLast[0]
answer = username ('Joann', 'Doe')
print (answer)
strFirst is a
.
The strFirst is a Return value
What is meant by Computer programming ?
Writing code to support certain activities in a computer, application, or software programme and giving them instructions on how to do is known as computer programming.
Programming is renowned for being one of the most difficult things to master. Given how coding differs from traditional educational approaches, such as college degrees in computer science, it is not difficult to comprehend why some people find it difficult to learn how to do it.
To create graphics and special effects for movies, computer applications are used. Computer applications are used to do medical procedures such as X-rays, ultrasounds, and other tests.
The complete question is : What is strFirst? def username (strFirst, strLast): return strFirst + strLast[0] answer = username ('Joann', 'Doe') print (answer) strFirst is a A. Parameter B. Return value C. Function
To learn more about Computer programming refer to :
https://brainly.com/question/16936315
#SPJ1
