Answer:
Calcium chloride
Explanation:
Sublimation is the process whereby a solid substance is converted to gas when heat is applied or when exposed to an environment with a higher temperature.
Solid normally gets converted to the liquid phase before reaching the gaseous phase but these substances gets converted from solid straight to gas
Solid—> Gas
Dry ice( solid CO2) and Ammonium chloride undergo sublimation while Calcium chloride doesn't.
In the lab, a student adds 4.5 g of sodium chloride (NaCl) to 100.0 g of water. Calculate the molality of the solution.
Answer:
0.77mol/Kg.
Explanation:
The following data were obtained from the question:
Mass of NaCl = 4.5g
Mass of water = 100g.
Molality =...?
Next, we shall determine the number of mole in 4.5g of NaCl. This can be obtained as follow:
Mass of NaCl = 4g.
Molar mass of NaCl = 23 + 35.5 = 58.5g/mol
Number of mole NaCl =..?
Mole = Mass /Molar Mass
Number of mole of NaCl = 4.5/58.5
Number of mole of NaCl = 0.077 mole.
Next, we shall convert 100g of water to kilograms. This is illustrated below:
1000g = 1kg
Therefore, 100g = 100/1000 = 0.1Kg.
Finally, we can determine the molality of the solution as follow:
Molality is simply defined as the mole of solute per unit kilogram of solvent (water). Mathematically, it is represented as:
Molarity = mole of solute / kg of solvent
Mole of solute, NaCl = 0.077 mole
Kg of solvent = 0.1kg
Molality = 0.077mol/0.1kg
Molality = 0.77mol/Kg
The molarity of the solution is 0.77mol/Kg.
Calculation of the molarity of the solution:
Since
Mass of NaCl = 4.5g
Mass of water = 100g.
Here,
Mass of NaCl = 4g.
Molar mass of NaCl = 23 + 35.5 = 58.5g/mol
Now
Mole = Mass /Molar Mass
= 4.5/58.5
= 0.077 mole.
Now
1000g = 1kg
So,
100g = 100/1000 = 0.1Kg.
Now
Molarity = mole of solute / kg of solvent
Mole of solute, NaCl = 0.077 mole
Kg of solvent = 0.1kg
So,
Molality = 0.077mol/0.1kg
= 0.77mol/Kg
Learn more about sodium here: https://brainly.com/question/14248836
MY ELEMENT IS SODIUM
1. Summarize the physical and chemical properties of the element you selected.
2. In the lesson, many models were used to depict the atom. How did these models help you understand atomic structure?
3. How do protons, neutrons, and electrons differ in terms of their electrical charges and locations within the atom?
4. Describe the four fundamental forces. Which of these forces are involved in chemical bonding?
Please answer these questions or at least one.
Answer:
Explanation:
1. The element you selected is Sodium. some of the physical properties are
i. Sodium has a strong metallic lustre
ii. Sodium are usually silver white in color
iii. Sodium is soft it can be cut with knife
iv. Sodium are malleable and ductile.
v. Sodium conduct electricity
Sodium belong to group 1 elements which are called Alkali metals. Sodium have one valency electron and it gives this electron easily during bonding . This is one reason sodium and other alkali metals are very reactive. Sodium can instantly be oxidized by water. Sodium has a relative atomic mass of approximately 23 amu.
2. There are various models that describe atoms .This models includes John Dalton models, J.J Thompson model, Ernest Rutherford model, Bohr's models etc. This models made us understand the role and location of each sub atomic particles. The models shed more light on subatomic particles like electron which revolve around the nucleus. It provide more information on what contribute to the weight of an atom.
3. The proton , neutron and electron are subatomic particles of an atom. The proton and the neutron are located at the nucleus of an atom. The proton and neutron contributes majorly to the weight of an atom. The proton is positively charge while neutron has no charge.
Electron is found to move around the nucleus in cloud. The electron is negatively charge. The electron determines bonding of atoms. An atom is electrically neutral if the number of proton is equal to the number of electron.
4. The four fundamental forces includes weak nuclear forces , strong nuclear forces , gravity and electromagnetic forces.
Weak nuclear forces is responsible for particle decay .Nuclear forces don't play a role in chemical reaction . If they are involve in a reaction it becomes nuclear reaction not chemical reaction.
Strong nuclear forces causes a strong nuclear interaction and it is the strongest among the 4 fundamental forces. This strong force only operate when subatomic particles are much closer to each other.
Gravity force is too weak to affect chemical reaction much. The gravity forces involves the interaction between two objects with energy and mass.
The electromagnetic force act between charged particles like negatively charged electron and positively charged proton. Electromagnetic force is the most important force in chemical bonding as it depends on the arrangement of atoms and the state of their electron. Electromagnetic forces exist in various forms like the covalent bond, metallic, ionic , dipole dipole, hydrogen bonds and many more. The major force involve in chemical bonding is the electromagnetic force.
Why are the electrons in a bond between carbon and oxygen, C-O, closer to the oxygen atom than the carbon atom?
Answer:
Because electronegativity of Oxygen is higher than electronegativity of Carbon.
Explanation:
The electrons in a bond between carbon and oxygen, C-O, closer to the oxygen atom than the carbon atom because electronegativity of Oxygen is higher than electronegativity of Carbon.
Tyler measured the force of his grip. Which is the most likely reading?
A.
190kg
B.
190N
C.
1 lb
D.
20,000 N
E.
5 seconds
F.
18mg
Answer:
190n
Explanation:
190 190 and because it is easy to understand if you didn't understand my answer ask any man
A solution of Co(NO₃)₂ is electrolyzed using a 15.0A current for 1.00 hour and Co(s) is produced at the cathode. Calculate the moles of electrons that was used to electrolyze the solution? Calculate the moles and mass of Co(s) produced at the cathode?
Answer:
1. 0.56 mole of electron.
2. 0.28 mole of Co .
3. 16.52g of Co.
Explanation:
The following data were obtained from the question:
Current (I) = 15A
Time (t) = 1 hr = 1 x 60 x 60 = 3600secs
Next, we shall determine the quantity of electricity, Q flowing in electrolyte. This is illustrated below:
Quantity of electricity (Q) = current (I) x Time
Q = It
Q = 15 x 3600
Q = 54000C.
1. Determination of the moles of electrons used to electrolyzed the solution. This is illustrated below:
96500C = 1 mole of electron
Therefore, 54000C = 54000/96500 = 0.56 mole of electron.
Therefore, 0.56 mole of electron was used to electrolyze the solution.
2. Determination of the number of mole of Co produced at the cathode. This is illustrated below:
At the cathode:
Co2+ + 2e —> Co
From the balanced equation above,
2 moles of electron produce 1 mole of Co.
Therefore, 0.56 mole of electron will produce = 0.56/2 = 0.28 mole of Co.
Therefore, 0.28 mole of Co is produced at the cathode.
3. Determination of the mass of Co produced at the cathode. This can be achieved by doing the following:
Molar mass of Co = 59g/mol
Number of mole of Co = 0.28 mole
Mass of Co =..?
Mass = mole x molar mass
Mass of Co = 0.28 x 59
Mass of Co = 16.52g
Therefore, 16.52g of Co is produced at the cathode.
At STP how many moles of
argon gas are present in 6.5
liters of argon gas
Answer:
0.289 molIn order to determine the number of moles of the given volume of Ar, divide the given volume by the molar volume of an ideal gas,
22.710 L/mol
Explanation:
So you have a volume of 6 .5
6.5L / 22.710 L/mol
L is eliminate .
6.5/ 22.710 L/mol = 0.286 mol
Using the older STP values of 0 ∘ C or 273.15 K , and pressure of 1 atm , molar volume is 22.414 L/mol .
6.5L /22.414 L/mol .= 0.289 mol
can a substance be a lewis acid without being a bronsted-lowry acid?argue
Answer:
Yes
Explanation:
Yes, A substance can be a lewis acid without being a Bronsted-Lowery acid because there are some substances which cannot donate protons(Bronsted-Lowery acid) but can accept a pair of electron.
For Example:
Let us take the example of BF₃
BF₃ contains no proton so it is not a Bronsted Lowery Acid
However, BF₃ has an incomplete octet with 6 electrons. It needs an electron pair to complete its octet. It accepts a pair of electron to become a Lewis Acid
Answer:
Interesting question, and the answer is yes, a substance can be a Lewis acid but not a Bronsted-Lowrey acid. To see this, let’s take a look at the definitions of each.
Explanation:
Bronsted-Lowrey acid:
A compound that is a hydrogen ion (proton) donor. When dissolved in the solvent in question, these compounds lose a proton to the solution. The concentration of these protons in solution is referred to as acidity, and is measured on the pH scale.
Lewis acid:
A substance that is an electron pair receiver. In solution, free electron pairs will form bonds with the substance, either ionic or covalent. In this definition, a proton is itself an acid, rather than a part of an acid.
A key thing to note here is that, in the Bronsted-Lowrey definition, there must be a proton. That means, all Bronsted-Lowrey acids are of the form HXn→H++Xn− , showing the dissociation in solution. However, a Lewis acid needs only to have the ability to accept an electron pair, which means that H+ is a Lewis acid, instead of what makes a compound an acid. Additionally, that means that the number of compounds that qualify as a Lewis acid are expanded. A favorite example of mine is boron trifluoride, or BF3 . It is a common reagent in organic synthesis, it is a Lewis acid, but does not have any hydrogen, so it cannot be a Bronsted-Lowrey acid
pls help asap pls !!
Answer:
basic solution.
Explanation:
has a pH of 12.
it turns clear indicator pink.
it contains hydroxide ions which conduct electricity
Which of the following is true about the principle of the conservation of mass? *
1 point
d. The mass of the products is never equal to the mass of the reactants.
e. The mass of the products is less than the mass of the reactants.
f. The mass of the products is equal to the mass of the reactants.
g. The mass of the products is greater than the mass of the reactants.
Answer:
F
Explanation:
"The mass of the products is equal to the mass of the reactants" is true about the principle of the conservation of mass.
So, option f is correct one.
What is the principle of conservation of mass?The principle of the conservation of mass states that mass can neither be created nor be destroyed in a chemical reaction, it only transferred from reactants to products. It means that mass of reactants is equal to mass of products.Example when wood burns the mass of shoot, ashes, and gases equal to the original mass of of charcoal and oxygen when it first react.To learn more about conservation of mass here.
https://brainly.com/question/13383562
#SPJ3
If a 200 g piece of aluminum has a density of 5.0 g/cm^3. what is its volume?
Answer:
Volume=mass in g /density
Answer: 40cm^3 or 40ml
Explanation:
[tex]Density=\frac{mass}{volume}[/tex]
so 5=200/V
V=200/5
V=40cm^3
How much heat is added if 0.2067g of water is increased in temperature by 0.855
degrees C?
Answer:
0.756 J
Explanation:
Temperature change (delta T) = 0.855 degrees Celsius
Mass of water (m) = 0.2067 g
Specific heat capacity of water (c) = 4.28 J/g degrees C
Heat added = m * c * delta T
= (0.2067 * 4.28 * 0.855) J
= 0.756 J
polarity of the molecules increase with electro nogativity
Answer:
true
Explanation:
polarity of the molecules increased with electronegatiy it's true
Pls help me with this will mark brainliest
Answer:
Pulmonary circulation moves blood between the heart and the lungs. The oxygenated blood then flows back to the heart. Systemic circulation moves blood between the heart and the rest of the body. It sends oxygenated blood out to cells and returns deoxygenated blood to the heart
Explanation:
Which if the following matters occupies more space, assuming similar number of molecules? A.(Solid) B.(Liquid) C.(Gas) D. (Solid and gas)
scientists often work on projects for a long time and fail to see sources of error in their research. Which process allows an outside expert to look at the scientist’s project and point to sources of error?
Answer:
Replication
Explanation:
In science, the work of a scientist is regarded as authentic if other experts in other places can follow the same steps as he/she claimed to follow and arrive at the same result.
For example, a scientist in California, United States of America may carry out a research and publish his findings. Another scientist in Christchurch New Zealand following exactly the same procedure is expected to arrive at the same results as the original researcher if there were no errors in the work.
However, where there are disparities in results, the scientist in Newzealand may discover errors that were unknown to the original researcher in the united States. The New Zealand scientist was carrying out a process known as 'replication'. That is, repeating a scientific research in order to obtain the same results thereby validating the research.
Please look at the photo and identify what’s in it!
Answer:
Explanation:
A battery
Answer:
Ac motor is in this images
Reply ASAP: Why do electrons affect the structure of a molecule?
A. Bonding pairs are positively charged and lone pairs are negatively charged and they push each other into certain shapes.
B. They do not.
C. The electron clouds are negatively charged and repel each other as far apart as possible.
D. Bonding pairs are negatively charged and lone pairs are positively charged and they push each other into certain shapes.
Answer:
C. The electron clouds are negatively charged and repel each other as far apart as possible
Explanation:
This is the basis of VSEPR theory.
The angles between the electron clouds determine the shapes of the molecules.
B. and D. are wrong. All electron pairs are negatively charged.
The electrons affect the structure of a molecule because the bonding pairs are positively charged and lone pairs are negatively charged and they push each other into certain shapes.
What is the shape of an atom?Every atom or molecule consist some kind of geometry or shapes like linier, tetrahedral, square planner, octahedral etc. with some bond length and angles present with them.
The bond pairs in a geometry is made up with positive charge and lone pairs present on the atom in the form of negative charge as they both are opposite in nature and repel or push each other in opposite direction.
Due to this phenomena the structure of the atom gets effected and geometry will change on the basis of lone pair and bond pair repulsion.
Therefore, electrons affect the structure of a molecule because the bonding pairs are positively charged and lone pairs are negatively charged and they push each other into certain shapes.
Learn more about the shape of an atom, here :
https://brainly.com/question/21939862
#SPJ5
describe an experiment to show water is an oxide to hydrogen
Answer:
2H + O -------> H2O
and hydrogen react with oxygen so it is oxide of hydrogen
like iron react with Oxygen and give
iron oxide
Explanation:
after passing electric current in the water the two gases will get seperated and on bringing the matchstick close to hydrogen it will burn with a pop sound
The temperature of a piece of copper with a mass of 95.4g increases from 25 degrees Celsius to 48.0 degrees Celsius when the metal absorbs 849 J of heat. What is the specific heat capacity of copper?
Answer:
The answer is 3.87 J/g°C
Explanation:
Here is the equation we are going to use:
[tex]C=\frac{q}{mT}[/tex]
C= specfic heat in J/g°C
q = heat in joules (J)
m = mass in grams (g)
T = change in temperature
Here is what is given:
q = 849 J
m = 95.4 g
T = 48.0 - 25.0 = 23°C
Find:
Specific heat capacity in J/g
The first thing we are going to do is plug everything into the equation:
[tex]C = \frac{849J}{(9.54g)(23degreesC)}[/tex]
Then we are going to solve for C
[tex]C = \frac{849J}{219.42gC} = 3.87 J/gCelsius[/tex]
Hope this helps!
Answer:
The answer is 3.87 J/gC
What happens to the total mass of a substance undergoing a physical change
Answer: It stays the same
Explanation:
Answer: it stays the same (A)
Explanation:
did the test online got 100%
How much cesium (half-life = 2 years) would remain from a 10 g sample after
4 years?
O A. Og
OB. 8g
O c. 59
O D. 29
SUBMIT
Answer: 2.5 grams
Explanation:
Expression for rate law for first order kinetics is given by:
[tex]t=\frac{2.303}{k}\log\frac{a}{a-x}[/tex]
where,
k = rate constant
t = age of sample
a = let initial amount of the reactant
a - x = amount left after decay process
a) to calculate the rate constant:
Half life is the amount of time taken by a radioactive material to decay to half of its original value.
[tex]t_{\frac{1}{2}}=\frac{0.693}{k}[/tex]
[tex]k=\frac{0.693}{2years}=0.346years^{-1}[/tex]
b) to find amount left after 4 years
[tex]4=\frac{2.303}{0.346}\log\frac{10}{a-x}[/tex]
[tex](a-x)=2.5g[/tex]
Thus 2.5 g of cesium would remain from a 10 g sample after 4 years
I need this fast plz, 50 points
By doing which action will you decrease the number of collisions and energy of reactant molecules?
A.) decreasing the temperature of the reactant mixture
B.) increasing the pressure of the reactant mixture
C.) decreasing the concentration of reactants
D.) adding a catalyst
Answer:
It is decreasing the temperature of the reactant mixture.
Explanation:
Just took the test
In order to decrease the number of collisions and energy of reactant molecules, the temperature of the reactant mixture would need to be decreased as well.
Temperature of reactantsThe temperature of reactants is proportional to the average kinetic energy of the molecules of the reactants.
Also, the higher the average kinetic energy of the reactant molecules, the higher their chances of colliding and reacting to form products.
Thus, in order to decrease their energy and collision frequency, the temperature of the reactant mixture needs to be decreased.
More on temperature and kinetic energy can be found here: https://brainly.com/question/2731193
Elements that form ionic bonds generally have how many valence electrons?
Answer:
they should have a number that can completely transfer and fill the other atom
Explanation:
example:
sodium(2.8.1)and Chlorine(2.8.7)the sodium will give chlorine the 1 valence electrobo so they both become stable(2.8)±and(2.8.8)–
magnesium(2.8.2)and oxygen(2.6)same way as above to abtain mg(2.8)±²and oxygen(2.8)–²
The pressure exerted by 0.002 moles of a gas in a 500 mL container at 25oC is:
Answer:
0.1715 atm
Explanation:
We use the Ideal gas equation to calculate this
Mathematically;
PV = nRT
rearranging, we have
P = nRT/V
from the question, we have
n = 0.002 moles
R = 0.082
T = 250 = 250 + 273 = 523 K
V = 500 ml = 500/1000 = 0.5 L
Plugging the values we have;
P = (0.002 * 0.082 * 523)/0.5
P = 0.1715 atm
When electrons are removed from the outermost shell of a calcium atom, the atom becomes
A)an anion that has a larger radius than the atom.
B) an anion that has a smaller radius than the atom.
C)a cation that has a larger radius than the atom.
D) a cation that has a smaller radius than the atom.
Answer:
A cation that has a smaller radius than the atom.
Explanation: when electrons are removed from the outermost shell of a calcium atom, the atom becomes a cation that has a smaller radius than the atom.
When electrons are removed from the outermost shell of a calcium atom, the atom becomes a cation that has a smaller radius than the atom. Therefore, the correct option is option D.
What is atom?Atom, the smallest unit of matter that may be separated without releasing electrically charged particles. It is also the smallest unit of matter with the characteristics of a chemical element. As a result, the atom is indeed the fundamental building component of chemistry.
The majority of the atom comprises empty space. The rest of the structure is made up of a positive-charged nucleus of neutrons and protons surrounding by a cloud of electrons with negative charges. In comparison to electrons, the lightest energized particles in nature, the nuclei is small and dense. When electrons are removed from the outermost shell of a calcium atom, the atom becomes a cation that has a smaller radius than the atom.
Therefore, the correct option is option D.
To know more about atom, here:
https://brainly.com/question/29712157
#SPJ6
___and ___exert pressure on the walls of the vessel in which they are carried out
A) Solid, liquid and Gases
B) Gases and solids
C) Liquids and gases
D) Solid and gases
Answer:
C) Liquids and gases
Explanation:
The correct answer would be liquids and gases.
The molecules of liquids and gases move randomly when held in a container. The random movement causes a collision between the molecules of the liquids/gases and between the walls of the container, creating pressure in the process. This is unlike the molecules of solids that vibrate about fixed positions.
Hence, the correct option is C.
C2H5OH(l)+CH3COOH(l) → CH3COOC2H5(l)+H2O(l) If the yield of ethyl ethanoate obtained when 20.00 g of ethanol is reacted with excess ethanoic acid is 30.27 g, calculate the percentage yield
Answer:
The percentage yield is 79.12%
Explanation:
The first thing we need to calculate here is the theoretical yield of ethyl ethanoate that can be obtained from 20g of ethanol.
Since the mole ratio is 1:1, then this is quite straightforward.
What we need to obtain at first here is the number of theoretical moles of ethanol reacting.
That would be mass of ethanol/molar mass of ethanol
Molar mass of ethanol is 46g/mol
Thus the number of moles is 20/46 = 0.4348 mole
Like it is indicated earlier, since the number of moles are equal from the balanced equation, it also means that 0.4348 mole of ethylethanoate is produced
Now, we need to know the mass of ethyl ethanoate produced
The mass can be calculated by multiplying the number of moles by the molar mass
The molar mass of ethyl ethanoate is 88g/mol
So the mass of it produced = 0.4348 * 88 = 38.2624 or let’s just say 38.26
Thus, the percentage yield will be;
Actual yield/Theoretical yield * 100%
From the question, our actual yield is 30.27g while our calculated theoretical yield is 38.26g
= 30.27/38.26 * 100% = 79.12%
Which of the following reactions shows that the formation of CO2 releases
393.5 kJ/mol?
A. C(s) + O2(g) → CO2(g) + 393.5 kJ
O B. C(s) + 20(g) + 393.5 kJ → CO2(9)
O C. C(s) + O(g) + CO2(g) + 393.5 kJ
D. C(s) + O2(g) + 393.5 kJ → CO2(g)
Answer:
A. C(s) + O2(g) → CO2(g) + 393.5 kJ
Explanation:
The formation of carbon IV oxide (CO2) is an exothermic process. n exothermic process is a chemical process in which heat is evolved. Speaking in lay man's terminology, heat is one of the 'products' of the reaction. This implies that heat is evolved by the process.
The formation of CO2 is always a combustion reaction where heat is evolved or released by the reaction system. Hence the reaction could be shown as;
C(s) + O2(g) → CO2(g) + 393.5 kJ
This implies that 393.5 kJ of energy is released in the reaction in the form of heat. Hence the answer given in the answer box.
Answer: C(s) + O2(g) → CO2(g) + 393.5 kJ
If the atmospheric pressure in the laboratory is 1.2 atm, how many moles of gas were in each syringe? (Hint: Choose one volume and temperature pair from your data table to use in your ideal gas law calculation.)
Answer:
A: 2.525 x 10-4 mol
B: 2.583 x 10-4 mol
Explanation:
Part A:
Data Given:
. Temperature of water (H2O) = 21.3°C
Convert Temperature to Kelvin
T = °C + 273
T = 21.3 + 273 = 294.3 K
volume of (H2O) gaseous state = 5.1 mL
Convert mL to liter
1000 mL = 1L
5.1 ml = 5.1/1000 = 0.0051 L
Pressure = 1.2 atm
. no. of moles = ?
Solution
no. of moles can be calculated by using ideal gas formula
PV = nRT
Rearrange the equation for no. of moles
n=PV/RT......... (1)
where
P = pressure
V = Volume
T= Temperature
n = Number of moles
R = ideal gas constant
where
R = 0.08206 L.atm/ mol. K
Now put the value in formula (1) to calculate no. of moles of
n = 1.2 atm x 0.0051 L / 0.08206 L.atm.mol-1. K-1 x 294.3 K
n = 0.0061 atm.L / 24.162 L.atm.mol-1
n = 2.525 x 10-4 mol
no. of moles of gas (H2O) = 2.525 x 10-4 mol
Part B:
Data Given:
Temperature of water (H2) = 21.3°C
Convert Temperature to Kelvin
T = "C + 273
T= 21.3 + 273 = 294.3 K
volume of (H2) gas = 5.2 mL
Convert mL to liter
1000 mL = 1 L
5.2 ml = 5.2/1000 = 0.0052 L
Pressure = 1.2 atm
. no. of moles = ?
Solution
no. of moles can be calculated by using ideal gas formula
PV = nRT
Rearrange the equation for no. of moles
n= PV / RT......... (1)
where
P = pressure
V = Volume
T= Temperature
n = Number of moles
R = ideal gas constant
where
R = 0.08206 L.atm/mol. K
Now put the value in formula (1) to calculate no. of moles of
n = 1.2 atm x 0.0052 L/0.08206 L.atm.mol-1. K-1 x 294.3 K
n = 0.0062 atm.L/ 24.162 L.atm.mol-1
n = 2.583 x 10-4 mol
I
no. of moles of gas (H2) = 2.583 x 10-4 mol
Which of these is NOT an example of how your community uses natural
resources?
