Which of these are consequences of an increase in long-run aggregate supply? Correct Answer(s) Drag appropriate answer(s) here an increase in the price level an increase in full-employment output an increase in short-run aggregate supply a decrease in the long-run rate of unemployment u*

Answer:

when the atom have electrons more than protons

and thats what called negative ion

Explanation:

The compound with the lowest acidity and the highest base, NH2CH3, has the highest Kb value; otherwise, the lower the acidity, the higher this same Kb value, and vice versa.

Stomach acid can enter the esophagus if the sphincter muscle at the bottom of the esophagus relaxes at the wrong time. This could cause heartburn and other symptoms as well. Reflux may be a regular or persistent cause of GERD.

When the pH is too acidic, the cells in the pancreas, small intestine, and stomach that are responsible for producing and secreting digestive juices don't function properly. Bloating, gas, cramps, or indigestion follow as a result of this.

To know more about acidity visit:

https://brainly.com/question/29796621

#SPJ4

The strongest type of intermolecular force present between two NH2CH3 is Hydrogen bonding.

The intermolecular force is an electrostatic attraction between positive and negative poles of molecules. The electrostatic force is directly proportional to the strength of a physical property. The strength of an intermolecular force based on the magnitude of the charges and the distance between each other. strongest type of intermolecular force in methylamine is Hydrogen bonding. Hydrogen bonding is a special type of dipole-dipole force. It arises between the H atom bonded to an N, O, F atom of one molecule and the N, O, F atom of another. It is stronger than dipole-dipole forces. it is due to the electronegativity of the N, O, and F atoms and the polarity between the electronegative atoms and the H atom.

To learn more about Intermolecular forces please visit:

https://brainly.com/question/12243368

#SPJ4

Answer: Chemical Change

Explanation:

A chemical change is a change in which a chemical substance is transformed into one or more different types of substances. Chemical changes happen through the process of chemical reactions resulting in substances with different properties.

Chemical changes are irreversible and also known as permanent changes in which a completely new substance is formed.

You obtained a 72% yield. Suppose I have enough ingredients to make 25 cookies.

Cookies are small text files that are stored on a user's computer by websites they visit. They are used to store information such as logins, site preferences, and other data. Cookies allow websites to remember a user's preferences and settings for future visits, which makes the user experience more convenient and efficient.

They also allow websites to track user behavior and provide a better experience tailored to the user’s needs. Cookies can also be used to track user behaviour across multiple sites, which is useful for targeted advertising. Cookies are essential for many websites to function properly, and they are usually harmless. However, users have the option to disable cookies or delete them at any time.

To learn about more yield visit:

brainly.com/question/21925098

#SPJ1

the masses expect for nitrogen gas. Let's say x is the mass of nitrogen gas.

X=7g reaction of given the equation representing .

Nitrogen is important to the chemical industry. It is used to make fertilisers, nitric acid, nylon, dyes and explosives. To make these products, nitrogen must first be reacted with hydrogen to produce ammonia. This is done by the Haber process.

Every year people are killed by breathing “air” that contains too little oxygen. Because 78 percent of the air we breathe is nitrogen gas, many people assume that nitrogen is not harmful. However, nitrogen is safe to breathe only when mixed with the appropriate amount of oxygen.

To know more about nitrogen visit

https://brainly.com/question/16711904

#SPJ4

Since the gas molecules are drawn to one another, they do not press as hard on the container walls as they would if there were no mutual attraction between them.

The smallest component of a chemical element or compound, a molecule possesses the chemical characteristics of that element or compound. Atoms are joined together through chemical bonds to make molecules.

When more than two atoms come together and form bonds with one another, a molecule is created. Each atom shares an electron when a bond is formed between them. A molecule is created as a result of a covalent bond.

To know more about molecule visit :

https://brainly.com/question/19556990

#SPJ4

The solution for the above questions are gas phase, boiling point, the solid-liquid (melting point) phase, condensation point, freezing point and liquid phase respectively.

Vaporization is the process by which a substance is transformed from its liquid or solid state into its gaseous (vapor) state. Boiling is the term for the vaporization process when conditions permit the formation of vapor bubbles within a liquid. Sublimation is the process of directly converting a solid into a vapor.

a) point(s) where only a gas is present:  the gas phase

b) temperature at which vaporization occurs:  the boiling point

c) point(s) where a mixture of a solid and a liquid are present:  the solid-liquid phase boundary

d) point(s) where a gas turns into a liquid:  the condensation point

e) temperature at which the substance starts to freeze:  the freezing point

f) range where there is only a liquid:  the liquid phase

To know more about vaporization, visit:

brainly.com/question/11651433

#SPJ4

Answer:

Explanation:     We all have some knowledge of what specific heat is, after all, we have gone through Physics in High School.

It is the amount of heat that required to raise the temperature of a certain substance by a certain amount. The amount of heat depends on the properties of the substance. This means that the amount of heat will vary for different substances.

Specific heat is a measure of how thermally insensitive a substance is when it’s subjected to an addition of energy. This specific heat calculator is a tool to help you calculate the specific heat of different substances.

Energy 63000  joules

Change of tempreture  3 c

mass 5 kg

Answer:Heat energy required is 2593.5 joule energy

Explanation:The formula to calculate heat energy is,

Q=m*c*temperature difference

Q=125*0.390*(75.4-22.2)

Q=2593.5J

Hope the explanation was helpful.

A final temperature for copper is 380.12 degrees celsius, according to the question.

The amount of heat needed to raise a substance's temperature by one degree Celsius in one gram, also known as specific heat. Typically, units and joules / gram per degree Celsius are used as the measure of specific heat. For instance, water has a specific heat of 1 calories (about 4.186 joules) each gram per degree Celsius.

To know more about Specific Heat visit :
https://brainly.com/question/11297584

#SPJ4

Amount of energy absorbed per gram of copper:

4.689 kJ ÷ 34.2 g = 137.4 J/g

The specific heat of copper:

137.4 J/g ÷ 0.385 J/g⋅°C = 357.5 °C

24.0 °C + 357.5 °C = 381.5 °C

A material's specific heat is a thermodynamic characteristic that quantifies the amount of energy required. The units used to describe it are joules per kilogram-kelvin (J/kg-K). As it relates to a material's capacity to store and transmit thermal energy, it is a crucial feature for understanding how materials react to variations in temperature. Specific heat can range between only few hundred joules per kilogram-kelvin in gases through a few thousand for solids, depending on the substance.

To learn more about specific heat
https://brainly.com/question/27862577
#SPJ4

The formula for density is:D=M/V,The peice of gold must be:               V=16.51 cm^3Au.

Why is density important?

The density of a place refers to the quantity of things—which may include people, creatures, plants, or objects—there are in it. Divide the quantity of objects even by area's measurement to determine density. A country's population density is calculated by dividing its total population by its area, expressed in square kilometres or miles.

In its simplest form, what is density?

We use the word "density" to indicate how much space (or "volume") an object or a substance occupies in terms of the amount of variables contained therein (its mass). Density can also be defined as the quantity of mass in a volume. A hefty, compact object has a high density.

To know more about density visit:

https://brainly.com/question/29775886

#SPJ4

The answer in terms of the variables C₁, C₂, C₃, and C₄ i Cequation is

(C₁ + C₂)(C₃ + C₄)/ C₁ + C₂+C₃ + C₄

A component or circuit's capacitance is its capacity to accumulate and store electrical charge as a form of energy. Energy-storing devices known as capacitors come in a variety of sizes and shapes.

C₁ and C₂ are parallel. C₃ and C₄ are parallel in a similar manner. The two parallel combinations are connected to one another in a series. To determine the equivalent capacitance, we use the series and parallel combination concept.

C₁ ₂ = C₁ + C₂

C₃ ₄ = C₃ + C₄

Ceq = C₁ ₂ C₃ ₄/C₁ ₂ + C₃ ₄

Ceq =  (C₁ + C₂)(C₃ + C₄)/ C₁ + C₂+C₃ + C₄

To know more about capacitance visit:

https://brainly.com/question/14746225

#SPJ4

Atomic mass increases as the atomic number increases, this is because that atomic number repersent the amount of protons in the atomic,

out of these 4 choices
F(9)

Be(4)

Al(13)
Ar(18)

The atomic mass is usually more than double of the atomic number, Therefore you can confirmed that argon has the highest atomic mass out of the 4 given options

The smallest unit which combine together to form a large molecule or a polymer by condensation or addition reaction is Monomer.

A large molecule (macromolecule) built up by repetitive bonding (covalent) of smaller molecules (monomers),Generally not a well defined structure, or molecular weight and Need to use statistical properties to describe.

1)Thermoplastics (plastics) — linear, some cross-linking can be melted and reformed on heating.

a) Amorphous—no ordered structure

b) Semi-crystalline—composed of microscopic crystallites domains of crystalline structure. Can be ordered as fibers (nylon, polyester)

2) Elastomers (rubbers) — moderately cross-linked can be stretched and rapidly recover their original dimension.

3) Thermostats—(resins)—massively cross-linked very rigid; degrade on heating.

4) Dendrimers—multiply branched—multiple consecutive (regular) branches.

To know more about polymer here

https://brainly.com/question/1533943

#SPJ4

Lead sulfate is soluble in water at a temperature of 20 °C and has a solubility of 0.2275 mg/100 mL.

In humans, lead sulfate is a PROBABLE CARCINOGEN. There is some proof that inorganic compounds induce kidney cancers in animals and lung, brain, stomach, & kidney cancer in people.

The mineral anglesite naturally contains lead sulfate. Sulfuric acid is added to a solution of lead salts to create it. Both lithography and fabric weighing employ lead sulfate. Additionally, it serves as just a paint drier.

To know more about lead sulfate visit:

https://brainly.com/question/14386254

#SPJ4

The percentage yield for the subsequent chemical reaction is 75.76%.

Chemical elements or chemical compounds make up substances. A response is a movement, propensity, or action that is taken in the opposite direction from what is intended. Reactions are made on the spur of the moment, without much thought or consideration of the potential outcome. Response: Saying something in response to another person's action or comment.

In daily life, there are several examples of chemical processes, such as photosynthesis, rust, baking, digesting, combustion, chemicals batteries, fermentation, and cleaning with soap and water. Not only in the chemistry lab, but all over the place, there are chemical reactions going on.

Hg=33 grams

HgO=25 grams

Percent yield = HgO/Hg×100

=33/25×100

=75.76%

To know more about Reaction visit:

https://brainly.com/question/3461108

#SPJ4

100 grams of solution would contain 28.4 grams of solute, since 284,000 parts per million is equal to 28.4 grams per 100 grams of solution.

A solute is a substance that is dissolved in a solution. It can be either a solid, liquid, or gas, and it is the component of the solution that is present in the lesser amount. When a solute is dissolved in a solvent, the solute molecules interact with the solvent molecules to form a new solution with different properties than either of the two components.

To calculate the amount of solute present in the solution, we can use the formula:

Grams of solute = (Concentration of solution in ppm) x (Volume of solution in mL)/1,000,000

In this case, the concentration of the solution is 284,000 ppm and the volume of solution is 100 grams. Plugging the values into the formula, we get:

Grams of solute = (284,000 ppm) x (100 grams)/1,000,000

Grams of solute = 28.4 grams

Therefore, 100 grams of solution would contain 28.4 grams of solute.

To know more about solute click-
https://brainly.com/question/25326161
#SPJ4

I'm choosing a value of 298 K, a volume of 1 liter, and 2 and 4 particles to compare the effects of volume and intermolecular forces in this specific scenario, which will be larger than what the ideal gas law predicts.

How do intermolecular forces differ depending on volume?

The intermolecular distances between gaseous molecules are generally large at low pressures, but as the gas pressure rises, they get less and less (Figure 5.10. 3). As a result, its volume taken up by the molecules rises much over the container's volume.

Why does the ideal gas rule break out at high pressures for gases?

It is assumed that the molecules in an ideal gas have no gravitational pull on one another and take up no space. However, real molecules do have limiting volumes and are attracted to one another. Therefore, under high pressures, a gas behaves differently than it should because of the attraction between its molecules.

To know more volume about :

https://brainly.com/question/13338592

SPJ4

atom forms a double bond with an oxide (O) atom and a single bond with a carboxylic group (OH).The pKa of acetic acid is 4.75. CH3COO- = 5.0510. Hence it is an acidic solution.

In their reactions, carboxylic acids frequently function as a base. The proton that the carbonyl oxygen molecule receives considerably increases the + energy on the carbocation.it is a acidic buffer as it contains acetic acid (weak acid) and it salt with strong base(NaOH) so the formula is = pH= pka+ log(salt)/(weak acid) hence ... pH=4.75+ log(0.25)/(0.125) =4.75+ log(2) =4.75+0.3010 =5.0510

Carbonyl substances with a double bond between carbon and oxygen include aldehydes, ketone, and carboxylic acids. These organic substances have numerous industrial uses in addition to being very significant in the science of organic chemistry.

To know more about carboxylic visit:

https://brainly.com/question/30160762

#SPJ4

Two or more substances which are not chemically combined but only mixed together form a mixture.

Learn more about Chemical mixture refer to :

https://brainly.com/question/24647756

#SPJ4

After the water was added, the solution's pH changed to 13.611 distilled water was added to the solution.

pH is a numerical indicator of how acidic or basic aqueous or other liquid solutions are. The word translates the values of the hydrogen ion concentration and is used often in chemistry, biology, and agronomy.

The pH scale goes from 0 (very acidic) to 14 (neutral) (strongly basic or alkaline). The neutral range on this scale has a pH of 7.0. Blood typically has a pH range of 7.35 to 7.45, making it mildly basic. The pH of blood is typically maintained by the body at or around 7.40.

The solution's total volume

V(total) = 437 ml + 641 ml

V(total) = 1078 ml

Concentration of water

C = (641 ml)/(1078ml)

C = 0.594

pOH = -log(0.594)

pOH = 0.22

New pH of the solution = 13.831 - 0.22 = 13.22

To know more about pH visit:

https://brainly.com/question/2288405

#SPJ4

We have one copper atom on the left side and two copper atoms on the right side (in Cu2S). Cu on the left side must be multiplied by two in order to equalize the amount of Cu.

What chemical formula describes the reaction where copper and sulfur combine to generate copper I sulfide?

According to the following balancing equation, copper and sulfur combine to generate copper(I) sulfide: CuzS = 2Cu(s) + S(s) (s)

What happens when sulfur and copper are heated?

A dark grey, brittle crystalline solid of copper sulfide is formed when the heated sulfur gas (S8, S4, and S2) reacts quickly with the copper wire.

To know more about copper visit:

brainly.com/question/19761029

#SPJ4

There are two methods for performing 3-phenyl-3-pentanol retrosynthesis. Ethyl groups are detached in the first way, and phenyl groups are disconnected in the second.

A chemical molecule with the generic formula R-Mg-X, where 'X' is a halide & 'R' is an organic group, typically an alkyl or aryl, is known as a Grignard reagent and maybe Grignard compound.

It is possible to count the halogen atoms in a halogen compounds using Grignard reagents. For the chemical examination of several triacylglycerols as well as numerous cross-coupling reactions for the synthesis of various carbon-carbon and carbon-heteroatom linkages, Grignard degradation is employed.

To know more about Grignard visit :

https://brainly.com/question/15876201

#SPJ4

Generally, The functional group present in U is likely alcohol or a carboxylic acid, as it produces effervescence when heated with sodium metal (a common test for the presence of these functional groups). The functional group present in W is likely an aldehyde or a ketone, as it produces a sweet, fruity smell when warmed with U in the presence of a catalyst.

The gas produced by the reaction between U and sodium metal is likely hydrogen gas (H2). The gas produced by the reaction between W and sodium hydrogen trioxocarbonate (IV) solution is likely carbon dioxide (CO2).

The reaction between U and sodium metal is likely a substitution or neutralization reaction. The reaction between U and W is likely an oxidation reaction, as a catalyst is required for the reaction to occur and it produces a sweet smell.

The catalyst used in the reaction between U and W is likely a strong oxidizing agent such as potassium permanganate or a Tollens' reagent.

If the molar mass of W is 74 g/mol, the molecular formula of the compound is likely C2H6O, as this is the simplest molecular formula that has a molar mass of 74 g/mol.

The structural formula of the compound would be a simple straight-chain alcohol like CH3-CH2-OH

The reaction between magnesium and 1.0 mol dm-3 ethanoic acid would be slower than the reaction between magnesium and 1.0 mol dm-3 hydrochloric acid because ethanoic acid is a weaker acid than hydrochloric acid. This means that it will have a weaker attraction to the electrons in the magnesium metal, making it less likely to react and therefore the reaction will be slower.

Read more about  functional Group

https://brainly.com/question/14618322

#SPJ1

The best statement is: Physical changes may be reversed by changing the temperature.

Physical changes which involve a change of state are all reversible. Other changes of state consist of vaporization (liquid to gas), freezing (liquid to solid), and condensation (gas to liquid). Dissolving is also a reversible physical change.

Physical changes are reversible. A change where no new substances are formed can basically be reversed by reversing the conditions is called a physical change.

A physical change includes a change in physical properties. Some examples of physical properties, such as: transition to a gas, change of strength, melting, change of durability, changes to crystal form, textural change, shape, size, color, volume and density.

Learn more about physical changes at: https://brainly.com/question/21509240

#SPJ4

[tex]\rm NaOH[/tex], [tex]\rm AgOH[/tex], [tex]\rm Ca(OH)_2[/tex], [tex]\rm Zn(OH)_2[/tex] are Arrhenius bases, [tex]\rm HClO[/tex], [tex]\rm H_3PO_4[/tex], HF, HBr are Arrhenius acids and NaCl, [tex]\rm CH_4[/tex] are Neither.

When dissolved in water, an acid is a chemical that raises the concentration of hydrogen ions. Acids often taste sour, can turn blue litmus paper red, and can release hydrogen gas when they react with certain metals.  A base, sometimes referred to as an alkali, is a chemical that raises the level of hydroxide ions in water when it is dissolved in it. When dissolved in water, an Arrhenius base raises the concentration of hydroxide ions in the solution. When dissolved in water, an Arrhenius acid is a chemical that raises the concentration of hydrogen ions in the solution. Neither Arrhenius acids nor bases are substances that do not split into ions when dissolved in water.

Arrhenius bases: [tex]\rm NaOH, AgOH, Ca(OH)_2, Zn(OH)_2[/tex]

Arrhenius acids:[tex]\rm HClO, H_3PO_4, HF, HBr[/tex]

Neither: [tex]\rm NaCl, CH_4[/tex]

To know more about Arrhenius bases and Arrhenius acids, here:

https://brainly.com/question/9936252

#SPJ12

K+ and Cl- ions are not included in the net ionic equation for the precipitation involving cacl2 and k2co3 solutions.

By taking note of each cation's name, symbol, and charge, one can determine the ionic compound's formula. Once the anion's identity has been established, record its symbol or charge. Create an electrically neutral substance by mixing the two ions.

Only the ions that really are present throughout a process are shown in chemical equations called ionic equations. Ions that mix in liquid to react and form new compounds is another way to say it. The other ions who choose not to participate are known as spectator ions.

To know more about  ionic equation visit:

https://brainly.com/question/29299745

#SPJ4

The frequency difference between these two line is -1.59 x 10^11 Hz.

To calculate the frequency difference between the two lines, apply the equation:

Frequency (Hz) = Speed of light (m/s) / Wavelength (m)

First, convert the wavelength of the first line to meters: 766.494 nm * (1 m / 1,000,000,000 nm) = 7.66494 x 10^-7 m

then, calculate the frequency of the first line: 3 x 10^8 m/s / 7.66494 x 10^-7 m = 3.9405 x 10^14 Hz

Repeat the same process for the second line: 769.90 nm * (1 m / 1,000,000,000 nm) = 7.699 x 10^-7 m

Frequency: 3 x 10^8 m/s / 7.699 x 10^-7 m = 3.9246 x 10^14 Hz

Subtract the frequency of the first line from the frequency of the second line to find the frequency difference:

3.9246 x 10^14 Hz - 3.9405 x 10^14 Hz = -1.59 x 10^11 Hz

So the frequency difference between the two lines is -1.59 x 10^11 Hz

learn more about frequency difference: https://brainly.com/question/13193436

#SPJ1

Answer:

c. The solubility of lithium chloride will increase

Answer:

FALSE

Explanation:

The temperature of the air has a significant impact on the speed of sound in that medium. The square root of the absolute temperature of the air determines the speed of sound in that medium. The speed of sound rises along with temperature.

The speed of sound is also influenced by pressure, however this influence is minimal. The speed of sound will rise with increasing pressure and decrease with decreasing pressure, however the effect is quite tiny in comparison to the influence of temperature.

In conclusion, air temperature has a significant impact on the speed of sound in air, with pressure having a marginally smaller impact.