which type of roofing material develops its design strength when it is placed into forms and then hardens at the building site?

Bend your front wheels out from the curb when parking uphill at a curb. Bend your front wheels towards the direction of the curb when parking on an incline.

Bend your front wheels out from the curb when parking uphill at a curb. Bend your front wheels towards the direction of the curb when parking on an incline. The front wheels of your car should be pointed toward the curb while parking downhill without a curb. When traveling uphill (or downhill) without a curb, keep turning your front wheels to the right so that if you drive, your car will exit the highway rather than roll into oncoming traffic. Bend your front wheels out from the curb when parking uphill at a curb. Turn your front wheels in the direction of the curb when parking downward. You should point your front wheels into the curb while parking your car with the front facing downhill and a curb.

Learn more about Curb here:

https://brainly.com/question/2351755

#SPJ4

Time t 0 sees Collar A start at rest and drop at a steady speed of 7 in/s2. Collar B rises with x = 727.5 millimeters constant.

Acceleration is the change in speed that occurs quickly. Generally speaking, but not always, acceleration denotes a shift in speed. Even when an object travels in a circular path, its velocity axis is still moving, therefore it keeps gaining speed.

Calculation

a)   aB = 240 mm/s² (↓)

aA = - 345 mm/s²

b) For the Block C

v₀ = 130 mm/s

For the Block A

v₀ = - 43.33 mm/s

c)  Δx =  727.5 mm

a)  For the Block B  

v = v₀ + a*t

480 = 0 + a*(2)

aB = 240 mm/s² (↓)

Then we have

3*LA + 4*LB + LC = L

If we apply

d(3*LA + 4*LB + LC)/dt = dL/dt

3*vA + 4*vB + vC = 0

d(3*vA + 4*vB + vC)/dt = d(0)/dt

3*aA + 4*aB + aC = 0

aA = - (4*aB + aC) / 3

aA = - (4*240 mm/s² + 75 mm/s²) / 3

aA = - 345 mm/s²

b) For the Block C

v = v₀ + a*t

v₀ = v – a*t

v₀ = 280 – (75)(2) = 130 mm/s

For the Block A

When t = 2 s

vB = 480 mm/s  

vC = 280 mm/s

we use the formula

3*vA + 4*vB + vC = 0

3*vA + 4*(480) + 280 = 0

vA = - 733.33 mm/s

Now, we can apply

v = v₀ + a*t

- 733.33 mm/s = v₀ + (- 345 mm/s2)(2 s)

v₀ = - 43.33 mm/s

c) We can use the equation

Δx = v₀*t + (1/2)*a*t²

Δx = 130*(3) + (1/2)(75)(3)²

Δx =  727.5 mm

To know more about acceleration visit:

https://brainly.com/question/14510119

#SPJ4

We will focus on using SQL to create the database and table structures, mainly using SQL as a data definition language (DDL).

The database tables will be updated, deleted, and selected using SQL as a data manipulation language (DML). According to clauses (such FROM and WHERE) that define criteria, a SQL SELECT statement pulls records from a database table.

Following is the syntax: SELECT column1, column2 FROM table1, table2 WHERE column2='value'; An advanced language for requesting, removing, and updating data from databases is called Structured Query Language (SQL). The de facto standard query language for databases is SQL, which is an ANSI and ISO standard.

Many well-known database products, including those from Oracle and Microsoft SQL Server, support SQL. It is extensively used in both business and academics, frequently for huge, complex datasets.

To learn more about database SQL refer to:

https://brainly.com/question/25694408

#SPJ1

Independent access point infrastructure/ Intelligent AP, Hub-and-spoke infrastructure/ Lightweight AP, Distributed wireless mesh infrastructure/ Intelligent AP.

A WLAN, or wireless local area network, is created by an access point, which is often found in a large building or workplace. An access point transmits a WiFi signal to a predetermined region after being connected to a wired router, switch, or hub through an Ethernet cable. It's true that it depends on the requirements. While medium to big businesses and organizations will undoubtedly need a network of access points and switches, homeowners and small businesses may find routers to be the best (if not the only) answer. Devices are connected wirelessly using wireless access points. They function by sending out a signal that various objects can connect to.

Learn more about access point here

https://brainly.com/question/29561877

#SPJ4

To use the Delaman Tire Air Compressor, Air Compressor 12V Portable Mini Air Compressor Electric Tire Inflator Pump 12 Volt Car 300 PSI, first plug the compressor into a 12-volt power source.

Check the pressure gauge on the compressor to make sure it is at the desired pressure setting. Attach the air hose of the compressor to the valve stem of the tire. Turn the air compressor on and wait until the tire is inflated to the desired pressure level. Turn the air compressor off and disconnect the air hose from the tire. Check the tire pressure with a tire pressure gauge to make sure it is at the correct pressure.

Learn more about Air Compressor:

https://brainly.com/question/13080807

#SPJ4

Heat detection will be used to protect a 40 by 65-foot space with a provided joisted ceiling. 716 tiles are required because the rafters are 12 inches deep.

Finding sentences within a text is the goal of sentence boundary detection. A phrase is the input unit for several tasks in natural language processing, including part-of-speech tag, dependency analysis, named entity recognition and machine translation.

Calculation

The parameters of a room given in the question are

Length = 10 feet

Width = 14 feet

Height = 12 feet

and Jamie wants to put the tiles on walls and the floor of his room.

Dimensions of each tile

Length = 1 feet

width = 1 feet

Surface area of walls and floor = 4 walls + floor = 4(Area of one wall) + area of floor

= 2(Length×height + width×height) + (length×width)

= 2(10×12 + 14×12) + (10×14) = 2(120+168) + 140 = 2×288 + 140 = 576 +140 = 716

Now total number of tiles required = Total area to be covered/area of one tile

Number of tiles = 716/1 = 716  

Therefore 716 tiles needed by Jamie.

To know more about detection visit:

https://brainly.com/question/2136390

#SPJ4

To ensure that all memory addresses can be consistently written to and read from, run a memory test.

The BSOD is a warning that appears on the blue screen when your computer experiences an interruption and displays this warning. It is formally known as a "Stop mistake." The notification alerts you to a serious problem that is causing Windows to restart. If there is a problem that results in an unexpected shutdown or restart of your device, a blue screen error, also known as a stop error, may occur. Your device may display a blue screen with the notification that it needs to restart because of a problem. Keep in mind that the Blue Screen of system can harm your computer in addition to being inconvenient. This is in order to heal.

Learn more about system here-

https://brainly.com/question/27162243

#SPJ4

The Fireline intensity is expressed in terms of flame length. It is equivalent to the product of the fuel's low heat of combustion (kJ/kg).

The heat availability of combustion per unit of ground is the sum of the heat released during a specified period of time for each unit length of the fire's edge and the rate at which the fire spreads per unit of ground area. The basic unit of measurement is Btu/sec/ft of fire front. The Fireline intensity (kW/m) is the rate of energy or heat emission per unit time per unit length of the fire front. It is equivalent to the product of the fuel's low heat of combustion (kJ/kg), the amount of fuel used in the flame front (kg/m2), and the linear pace of fire from a mathematical standpoint.

Learn more about The Fireline intensity here:

https://brainly.com/question/29348434

#SPJ4

The probability that all 3 men have red-green colorblindness is 0.0017 or 0.17%

The probability that a randomly selected man has red-green colorblindness is 0.12.

If we want to find the probability that all 3 selected men have this type of colorblindness, we can multiply the probability of a single man having it (0.12) by itself 3 times.

So the probability that all 3 men have red-green colorblindness is:

0.12 * 0.12 * 0.12 = 0.001728 ≈ 0.0017 or 0.17%

Read more about probability here:

https://brainly.com/question/24756209

#SPJ1

Answer:

A. Electric Control

Explanation:

A. Electric Control

Functional structure is most suitable when the size of the organization is large, has diversified activities, and operations require a high degree of specialization.

In order to give automation in decision-making or problem-solving, a decision support system is an information system that analyses business data and other information relevant to the firm. When difficulties arise while running the business, a management employs it.

Automated Information Systems (AIS) are computer-based collections of data and software that automate the management of operations and information by using the input of diverse resources. The result is meaningful output that can assist a business in making strategic decisions. T

he definition of an information system includes two viewpoints: one that focuses on its structure and the other that focuses on its function. An information system serves as a technologically enhanced medium for the goal of capturing, preserving, and spreading language expressions as well as for the supporting.

To learn more about  Information System refer to:

https://brainly.com/question/14688347

#SPJ1

The given statement is TRUE.

In an automotive air-conditioning system, the compressor is responsible for compressing and circulating refrigerant.

The compressor is typically driven by the engine through a belt and pulley system. The air gap is the space between the clutch assembly, which connects and disconnects the compressor from the engine, and the air-conditioning pulley, which is connected to the compressor and driven by the belt.

The purpose of the air gap is to provide clearance between these two components, which allows the clutch to disengage and the compressor to spin freely when the air-conditioning system is not in use.

Read more about air gap here:

https://brainly.com/question/14752856

#SPJ1

A fixed support that is to a structure restricts all rotations and movements at that location.

There are six support responses applied from the fixed support to the structure since the joint with fixed support has no degrees of freedom. R (externally independent) (externally independent) Support for a There are three possible reactions at a  engine. The term "ball and socket joint" is another name for the support. A built structure is often connected to its base using one of three basic types of connections: roller, pinned, and fixed. A simple support is a fourth form that is uncommon in building constructions. This is frequently as having no friction.

Learn more about engine here-

https://brainly.com/question/27162243

#SPJ4

One must first assume the inductive hypothesis for n before using that assumption to demonstrate that the assertion is true for n + 1. This is known as the induction step.

This means that the assertion P(n) is true for n = k + 1 if and only if the supplied statement holds true for some prime number k. This is sometimes referred to as the "inductive step," and the "inductive hypothesis" is the presumption because P(n) is valid for n=k.

Electromagnetic induction, or simply induction, is the technique of creating electrical charge in a conductor by exposing the conductor to a fluctuating magnetic field.

To know more about  induction visit:

https://brainly.com/question/29525504

#SPJ4

To pass a bicyclist traveling in the same direction on a two-lane road without bicycle lanes, you should slow down and wait until there is no traffic approaching, then pass the bicyclist leaving him or her sufficient space.

A bike lane is a section of the road that has been marked with pavement markings, signage, and striping specifically for the preferential or exclusive use of cyclists. With predictable behaviour and movements between cyclists and motorists, bike lanes allow cyclists to travel at their preferred speed without being hindered by the current traffic situation.

A bike lane differs from a cycle track in that it lacks any physical barriers (bollards, medians, raised curbs, etc.) that prevent motorised traffic from encroaching on it. When there is no parking, traditional bike lanes run along the curbside, next to parked cars on the right side of the street, or on the left side of the street in certain circumstances.

Learn more about bike lane

https://brainly.com/question/24238353

#SPJ4

Note that when the controller's output is set by a constant plus the error multiplied by the gain, you have "proportional Control" (Option A)

Proportional control is a type of control system in which the output of the controller is determined by a constant value (offset) plus the error multiplied by the gain.

The gain is a coefficient that defines how strongly the control system reacts to a mistake. This control is often employed in industrial processes and feedback control systems where precise control of a process variable is required. The controller's output is directly proportional to the error, thus the term proportional control.

Learn more about proportional control:
https://brainly.com/question/20164864
#SPJ1

No underwater luminaires shall be installed in a permanently-installed swimming pool that operates on supply circuits over 150 volts between conductors.

A circuit in electronics is a closed path that enables the movement of electricity from one point to another. A gap or break in the circuit does not obstruct the flow of current, even though it may contain a variety of electrical components like transistors, resistors, and capacitors.

A basic circuit is something like a flashlight. Because the circuit is not closed when the switch is off, no electricity will flow from the batteries to the flashlight's bulb. A piece of metal inside the flashlight physically closes the circuit gap when you turn the switch to the on position. The bulb then illuminates as a result of the batteries' electrical flow.

Learn more about circuit

https://brainly.com/question/21505732

#SPJ4

A system of parallel, non-concurrent forces acting on a body can be reduced by One resultant force and one resultant moment acting at any point on the body and One resultant force acting at a specific point on the body. Thus, C. Both of the above is correct.

Two or more forces that share a common line of action but have equal magnitudes but act in opposite directions are said to be non-concurrent forces. In plain English, this means that a system of forces is said to be non- concurrent when its components do not intersect at a single point. A concurrent force system, however, has a common point through which all forces pass.

Combined forces that don't add up to zero are considered non-concurrent forces. The fact that a couple's line of action does not intersect at one point makes them an example of a non-concurrent force. When it comes to mechanics, a couple is a system of forces with a resultant (net, or sum) moment but no resultant force.

Learn more about non-concurrent force

https://brainly.com/question/15103668

#SPJ4

The answer rests in how each style of bridge handles compression and tension, two significant stresses.

At 17.61 kilograms, the arch bridge collapsed, followed by the truss at 11.23 kilograms and the suspension at 14.86 kilograms. The test's findings indicate that the experiment may be reproduced digitally and that the arch bridge design performs best in the particular conditions of this experiment. Because the voussoirs are forced together rather than apart by downward pressure, an arch is able to support a much heavier weight than a horizontal beam of the same size and material. The supports of the arch must withstand the ensuing outward thrust.

Learn more about stresses here-

https://brainly.com/question/30128830

#SPJ4

Starting with the black dots, draw the vectors. The vectors' position and orientation will be rated. The vectors' lengths won't be graded.

A projecting volume or girder that is joined to a building at just one end is called a cantilever. Although they have been extensively utilized in bridge design for many years, they are still used in a variety of ways in modern structures.

Reinforced concrete is used to construct cantilever walls, and an L-shaped (or inverted T-shaped) foundation is used. By transferring the vertical tension behind the wall onto the foundation, the toppling caused by earth pressure lateral generated by the same soil mass is avoided.

To know more about cantilevered visit:

https://brainly.com/question/13254986

#SPJ4

Answer:

C. The outside temperature at which point heat loss from the building equals internal heat gain

Explanation:

The balance point temperature (also known as "balance temperature" or "neutral temperature") is the outside temperature at which the heat loss from a building equals the internal heat gain. At this point, no heating or cooling is required to maintain a comfortable indoor temperature. The balance point temperature is used in building design and HVAC system design to determine the appropriate size and type of heating and cooling equipment needed for a building.

Each winding in this installation uses tap 5. To adjust the incoming supply voltage, tap 5 has been chosen. A future rise in feeder voltage can be compensated for by tapping 1 or 2 on the left.

Voltage is the term used to describe the "pressure" that applies to electricity. Voltage is expressed in voltages (V), and higher voltages cause an electrical device to receive more electricity.

Connecting the measurement equipment to the network or element that has to be measured is the conventional approach for evaluating volts (the load). To measure the right power and avoid absorbing any radiation from the circuit being evaluated first, the measuring device must have an endless harmonic distortion (resistance).

To know more about voltage visit:

https://brainly.com/question/28517913

#SPJ4

If the electric field surpasses 3.0106v/m, dry air will degrade. If a capacitor's plates have an area of 8.8 cm2 apiece, it can hold a charge of 23.364 nC.

The charge of the capacitor is

Q=CV

  = (ε₀A/d)(Ed)

Q=ε₀EA

The amount of charge that can be placed on a capacitor is,

Q=ε₀EA

  =(8.85×10⁻¹²Nm²/C²)(3×10⁶ V/m)(8.8×10⁻⁴ m²)

  =23.364×10⁻⁹

  = 23.364 nC

The electric field is mathematically defined as a vector field that can be associated with each point in space, representing the force per unit charge exerted on a positive test charge at rest at that point.

The electric charge or time-varying magnetic fields produce the electric field. The electric field is responsible for the attractive forces that hold the atomic nucleus and electrons together at the atomic scale.

Gauss' law states that the total electric flux out of a closed surface is equal to the charge enclosed divided by permittivity. Or, the total flux associated with a surface is one-tenth of the charge enclosed by the closed surface.

Learn more about electric field here:

https://brainly.com/question/15800304

#SPJ4

Process scheduling that is based on priority is called priority scheduling. The scheduler chooses the jobs to complete according to priority in this algorithm.

The processes that are more important should be completed first, and tasks with equal importance should be completed in a round-robin or FCFS fashion. Priority is determined by factors like memory and time constraints. The CPU has been assigned to a certain process in this kind of scheduling approach. The activity that occupies the CPU will free it by changing context or ceasing. The only approach that works on a variety of hardware platforms is this one. That's because, unlike preemptive scheduling, it doesn't require specialized hardware (like a timer).

Learn more about specialised here-

https://brainly.com/question/28114678

#SPJ4

The shaded area's polar radius of gyration around its centroid C. Assume t = 130 mm, a = 465 mm, b = 565 mm ko = 253 mm.

The difference between the area of the complete polygon and the area of the unshaded portion inside the polygon is the area of the shaded region. There are two methods for the area of the shaded component to appear in polygons. The darkened area can be found either in the polygon's centre or on one of its sides. You might occasionally be necessary to determine the size of shaded areas. The area of the shaded zone is often calculated by deducting the area of a smaller inner form from the area of a larger outer shape. "Sector" of a circle is represented by the darkened area. A sector is the area of a circle that is bounded by two radii and an arc.

Learn more about shaded area here

https://brainly.com/question/13515841

#SPJ4

By combining science, computing, engineering, and math, STEM enables us to address the problems that the world faces today.

Engineering is the use of math and science to the designing, testing, and construction of devices, structures, and procedures. A rewarding job can result from studying it. Problem-solving is at the heart of engineering.

China, the States of America, German, and France have the largest need for mechanical engineers. Because they require them to design and construct machinery and other technology for their firms, these nations have a strong market for those in this field.

To know more about engineering visit:

https://brainly.com/question/14094488

#SPJ4

If there is a 1.30 mm gap between the plates, total electric field strength from the inside of the capacitor is E = 1.512 * 105 V. The electric potential across the capacitor, the distance between the plates, is V = 302.4 V.

Each position in space has an electric field attached with it when there is charge involved in any form. Electric field strength (E), also known as the electric field magnitude and direction, is stated as a value.

The area of space surrounding a static electricity particle or object that is where the charge body perceives force is known as the electrostatic potential. Examples: -Charges and their arrangements, such as filters and rechargeable battery, produce electric fields.

parallel plate capacitors,

A= 2.30×2.30=5.29 cm²

=5.29×10⁻⁴ m²

capacitor, Qc = ±0.708nC

= ±0.708×10⁻⁹

electric field strength, E

distance, =1.00 mm

=10⁻³ m

E = Q/(ϵ_o A)

E = 0.708×10⁻⁹/(8.85×10⁻²×5.29×10⁻⁴

= 1.512×10⁵ N/C

Potential difference,

d = 2×10⁻³ m

V = Ed

= 1.512×10⁵×2×10⁻³

= 302.4 V

To know more about electric field visit:

https://brainly.com/question/8971780

#SPJ4

The vertices based on the information will be:

1. 6 vertices, 1 pendant vertex(c), 1 isolated vertex(d),6 edges

2. 5vertices,15 edges, 0 isolated vertex, 0 pendant vertex

3. 9 vertices,2 isolated,0 pendant,12 edges

Vertex is a node in graph and represented as dot or circle in the diagram

Degree is the total number of of edges through a vertex is known as degree (In a undirected graph, a self-loop adds two to the node's degree)

An isolated vertex is a vertex with degree zero

An pendant vertex is a vertex with degree 1. It can also be refered to as leaf node.

Learn more about vertex on

https://brainly.com/question/21191648

#SPJ1

Answer:

The Negative battery cable is used to bolt the vehicle frame to allow the metal structure of the vehicle to serve as a large conductor to carry current.

Explanation:

Battery cable is large automotive cable. Like smaller types of automotive wire, it is available in PVC and cross-linked forms. Click here to read an earlier post explaining the differences between PVC and cross-linked wire insulation.

One type of PVC battery cable is SGT cable. It is rated to 80°C and therefore can be used in starters or battery grounds.  Cross-linked battery cables can also be used in starter and battery ground applications, and they are more resistant to heat, abrasion, and aging than PVC cable.

Two types of cross-linked battery cable are SGX and STX. They are rated to 125°C. Of the three types of battery cable (SGT, SGX, amd STX), STX has the thinnest wall, making it a popular choice for automotive applications with limited space.

To learn more about this visit the link:

https://brainly.com/question/26923743

https://brainly.com/question/29354736