Answer:
Jan Matzeliger
Explanation:
In terms of cars technology, does luxury equal safety, yes or no and why?
Since they are built to prevent collisions and offer more sophisticated safety and driver assistance features, luxury cars have a reputation for being among the safest automobiles on the road.
Are all automobiles similarly safe?Vehicles of all sizes are now safer because to advances in crash safety, yet even with these advancements, larger vehicles continue to be safer than smaller ones. Deaths in crashes decrease as vehicle size grows, as shown in the chart below.
What distinguishes expensive automobiles from everyday vehicles?Engines, transmissions, sound systems, telematics, safety features, and other equipment that aren't included in lower-priced models are frequently found in luxury cars, along with a plethora of other luxuries.
To know more about automobiles visit :-
https://brainly.com/question/1193772
#SPJ4
When an emergency vehicle sounds its sirens or uses a flashing light, you: _________
The right thing to do is to let an emergency vehicle pass when it is being followed by another vehicle and its sirens and flashlights are audible or visible.
One must assume that any approaching vehicles with sirens or flashlights are either an ambulance, a fire department van, a police van, an army truck, or a VIP car. Given that the vehicle is an emergency vehicle and is operating on the road to address an emergency, a regular citizen is required to give it the side. So, one must allow an emergency vehicle to pass when it approaches using its sirens and flashlights in order to assist it in getting to its objective. Pass cautiously and with caution. On a road with two or more lanes, you must leave a lane of space between you and the emergency vehicle if it is safe to do so.
Learn more about Flashlights here:
https://brainly.com/question/11553031
#SPJ4
Post an original post with your thoughts about the usefulness of the codes of ethics and/or issues that occur because software engineering does not meet the Bureau of Labor and Statistics requirements to be a profession.
A federal organization called the US Bureau of Labor Statistics (BLS) is in charge of gathering and examining information about the American labour force and economy.
The US Department of Labor's Bureau of Labor Statistics (BLS) is entrusted with disseminating accurate, timely, and pertinent data regarding the US labour market. Policymakers, companies, and individuals utilise this data to guide decisions on employment, pay, and general economic trends. The BLS gathers and disseminates information on a wide variety of labour market-related issues in the US, such as employment and unemployment, cost and inflation, productivity, and working conditions. This information is used to track the state of the US economy as a whole and to keep an eye on developments in different sectors and demographic groupings. The monthly Employment Situation report, one of the BLS's most well-known offerings, gives a thorough picture of the American labour market.
Learn more about BLS here:
https://brainly.com/question/30404378
#SPJ4
The potential difference measured across a coil is 4. 5v,when it carries a direct current of 9a. The same coil when carries an alternating current of 9A at 25Hz,the potential difference is 24v. Find the current, the power and power factor when it is supplied by 50v,50Hz supply
When a coil is carrying a direct current of 9A, the potential difference across the coil is 4.5v. The potential difference between the same coil and a 9A at 25 Hz alternating current is 24v.
What is the coil's differential potential?The time rate of change of magnetic flux through a coil of wire is equal to the potential difference created across its ends. The term "induced electromotive force" refers to this potential difference.
How do you determine the difference's potential?When a charge q is transported from point A to point B, the potential difference between the two points, V = VB - VA, is defined as the change in potential energy of the charge multiplied by the charge.
To know more about potential difference visit :-
https://brainly.com/question/12198573
#SPJ4
A worker was attempting
to correct an electrical problem involving two non-
operational lamps. He proceeded to the area where he thought the problem
was. He had not shut off the power at the circuit breaker panel nor had he
tested the wires to see if they were live. He was electrocuted when he
grabbed the two live wires and then fell from the ladder. What could have
been done to prevent this accident from occurring?
There are several things that could have been done to prevent this accident from occurring, including turning off the power, testing the wires, using appropriate personal protective equipment, etc.
What is safety procedure?A safety procedure is a series of directions or rules created to guarantee the security of employees in a specific working environment or while performing a specific task.
Several actions may have been taken to stop this catastrophe from happening, including:
Prior to attempting to work on the electrical system, turning off the power at the circuit breaker panel.Using a multimeter or a non-contact voltage tester, check to see if the wires are live.Protecting against electric shock by using the proper personal protection equipment (PPE), such as rubber gloves.Rather than attempting to do the electrical work yourself, have a certified electrician do it.Thus, the worker may have avoided the mishap and ensured a safe working environment by adhering to these safety procedures.
For more details regarding safety procedures, visit:
https://brainly.com/question/14480799
#SPJ9
Problems: 2.1 Find the number of equipotential common tie-points in Fig. 2-23: 2.2 Calculate current and current direction in Fig. 2-24(a) and (b): 2.3 For Fig. 2-25(a) and (b), find the unknown currents: Fig. 2-25 2.4 For Fig. 2-26a-d, find the unknown voltages: ig. 2. 3 (a) 2.5 For Fig. 2-27a-d find the unknown voltages and currents: 2.6 For Fig. 2-78a-c, find
R कq
at the terminals: 2.7 For Fig. 2-29a-d find all unknown currents (I):
2.8
For Fig. 2-30 a-d, find all equivalent resistances (Req): wi
sin
⋯
2.9 For Fig. 2-31 a-d, find all equivalent resistances (Req): 2.10 Attach a
10 V
load to the terminals and find the voltage and current across each resistor in the above circuits of Fig.
2−31
The correct answer is Have a look at Figure 1, which depicts the electric field lines of a single positive point charge in isolation. A positive charge emits electric field lines that.
Any computer emits RF (radiofrequency) waves as radiation. Except in cases where the intensity is strong enough to warm tissue, there is no evidence that these are detrimental (like a microwave oven). If you use your computer for longer than four hours every day, you are not putting yourself at risk (from radiation). Electromagnetic radiation is produced by computers. Namely, it produces visible light as electromagnetic radiation. Depending on the components of the computer, it is also possible for computers to generate other types of electromagnetic radiation, such as radio waves, ultraviolet light, and infrared light. One hour before going to bed, refrain from using them. Even if it is present in your bedroom, you are not required to utilise it. best that can be expected.
To learn more about emits electric click on the link below:
brainly.com/question/9446096
#SPJ4
A technician is tasked with building a test server. Which of the following hard drive types will provide the highest performance?
A. SCSI
B. SAS
C. SATA
D. iSCSI
The correct answer is (A) Learn terms like "You are replacing a hard drive and want to achieve the best performance from a standard" by studying with Quizlet's flashcards.
A flash memory card, often known as a storage card, is a compact storage device that stores data on mobile or distant computing systems using nonvolatile semiconductor memory. This data consist of text, images, audio, and video. You can access the Quizlet website from your mobile device's browser and print from there if your device is linked to a printer. Currently, printing is only possible from the website. You can access the Quizlet website from your mobile device's browser and print from there if your device is linked to a printer. The best features, such as Quizlet Learn, are only available in the subscription edition, which also eliminates advertisements and enables offline study. A month-to-month option is not available. A credit card is required, although a seven-day free trial is available.
To learn more about Quizlet's flashcards click on the link below:
brainly.com/question/30483796
#SPJ4
The frame structure of a STS
Synchronous transport signal
is divided into two parts. What are they?
A fast axonal transport method that uses proteins to convey the materials quickly is known as retrograde axoplasmic transport.
Typically, the bilayer structure of the cell membrane contains membrane proteins. The role of membrane protein primary function is that of a carrier. They convey the required elements into the cell by facilitating the entrance of molecules that cannot enter the cell on their own. Between the cell's internal and external environments, the membrane receptor proteins act as signal relays. Protein filaments give the cell structural support in terms of support. These proteins move the materials along the cytoskeletal microtubule surfaces of nerve cells. The chemicals are moved from the terminal ends of the axon towards the soma or cell body through retrograde axoplasmic transport. Most of the materials that need to be recycled or broken down are moved via this sort of axonal transport.
Learn more about Retrograde axoplasmic transport here:
https://brainly.com/question/5939246
#SPJ4
Increase 400 in the ratio 3:5
To increase the ratio 3:5 by 400, you can simply add 400 to each of the numbers in the ratio. The new ratio would be 403:505.
What is a Ratio?A ratio is a mathematical expression that compares the relative sizes of two or more values.
In ratio 3:5, the first number (3) represents one part and the second number (5) represents another part. These parts can be thought of as parts of a whole, where the whole is equal to the sum of the parts.
When you increase the ratio 3:5 by 400, you add 400 to each of the numbers in the ratio. This results in the new ratio of 403:505, which represents a new relationship between the parts.
The increase in the ratio by 400 means that each part has grown by 400 units, but the relative sizes of the parts have remained the same. The first part is still 3 times smaller than the second part, and the second part is still 5 times larger than the first part.
Read more about ratios here:
https://brainly.com/question/13513438
#SPJ1
write a function wordcount that computes the number of words in a sentence as a haskell data type
The correct answer is Python's count() function returns the total number of elements in the given list. One argument is required for this method's input. The list is iterated, and the quantity of matches is counted.
The COUNT function counts the number of parameters in the list as well as the number of cells that contain numbers. Get the number of entries in a number field that is part of a range or array of numbers by using the COUNT function. Excel does not have a button to automatically number data, in contrast to other Microsoft 365 products. But utilising the ROW function or sliding the fill handle to fill a column with a succession of numbers, you may quickly add sequential numbers to rows of data. Choose both columns of data while comparing two lists of data, click the F5 key on the computer, and choose the "Go to special" dialogue box. Next, choose "Row difference" from the list of alternatives. matching data cells across the
To learn more about matches is counted click on the link below:
brainly.com/question/29384238
#SPJ4
suppose a three-phase uncontrolled bridge rectifier is required to produce an rms voltage across the load of at least 380 v. what must the minimum amplitude of the rectifier's input sinusoidal phase voltage be?
Each phase voltage source is connected to the anode of a diode in a three phase half wave unregulated converter. Three diodes' cathodes are connected to one another to create a positive load terminal.
The three-phase voltage is what?On the other hand, a three-phase connection consists of three distinct conductors required for electrical transmission. Up to 230 Volts of voltage may be included in a single-phase power supply system.
A bridge rectifier converts AC to DC in what way?The AC input from the mains is first stepped down to a lower voltage. The negative cycle of the AC waveform is then eliminated by passing this AC supply through a rectifier circuit. After that, the signal is filtered to produce the DC output.
To know more about half wave visit :-
https://brainly.com/question/17584524
#SPJ4
Sample 102-1s was taken at a depth of 5 centimeters beneath the surface of the soil. all sterile handling techniques were followed per operational procedures in section 5-3a. molecular isolation techniques identified six molecules for evaluation. these have been downloaded into canvas for your analysis. further chemical analysis of the sample conducted as part of the extraction process yielded the following information: all elements in the sample appear to be composed of protons, neutrons and electrons. all elements in the sample, isolated outside of their constituent molecules, are electrically neutral.
Collecting samples for DNA analysis from blood or other bodily fluids. DNA extraction is the process of opening up cells using heat or chemicals to release the DNA.
Purification of the sample through separation of cellular waste and other contaminants from the DNA. Establishing whether the sample is adequate for analysis — quantification employing the polymer chain reaction (PCR) to electrically order the fragment amplification while copying the DNA. The following are the steps involved in isolating and purifying DNA: sample gathering, extraction of DNA, and cleaning of the sample. DNA extraction and PCR DNA amplification quantification. Step 1: Collecting samples entails taking DNA from blood or other bodily fluids for examination. Step 2: DNA extraction involves cracking open the cells using heat or chemicals to release the DNA. Step 3: Purifying the sample entails separating the DNA from cellular waste and other contaminants.
Learn more about DNA here:
https://brainly.com/question/14973625
#SPJ4
consider a wall refrigerator unit (home ac unit) which is used to cool down a home during the summer. its coefficient of performance in cooling mode is 4.06 if the refrigerator consumes 500 w of electrical power, at what rate does it remove heat from the home?
A refrigerator with a performance coefficient of K=5 removes heat from the cooling compartment at a rate of 250 J/cycle.
Therefore, the relationship between a heat engine's efficiency and a refrigerator's co-efficient of performance. The usable heating or cooling delivered to work (energy) required ratio, also known as the coefficient of performance, or COP, of a heat pump, refrigerator, or air conditioning system. Higher efficiency, less energy (power) usage, and thus reduced operational costs are all related to higher COPs.
Effort per cycle W= KQ
= 250/5 s
=50J
Heat released each cycle Q
=Q +W
=300J
Learn more about system here-
https://brainly.com/question/27162243
#SPJ4
JAVAStatistics are often calculated with varying amounts of input data. Write a program that takes any number of non-negative integers as input, and outputs the max and average. A negative integer ends the input and is not included in the statistics. Assume the input contains at least one non-negative integer.Output the average with two digits after the decimal point followed by a newline, which can be achieved as follows:System.out.printf("%.2f\n", average);Ex: When the input is:15 20 0 3 -1the output is:20 9.50
An integer is a whole number without any decimal points, which can be positive or negative. Integers larger than or equal to zero are referred to as non-negative integers.
We can use a loop to continuously read integers from the user up until a negative number is entered in order to create such a program. The maximum and average of the non-negative integers entered are then computed while disregarding the negative integer. The largest integer in the set serves as the maximum. As we read in the data, we may utilize a variable to keep track of the greatest number. The variable will have the highest value when the loop is finished. The average is calculated by dividing the total number of integers by the sum of all the integer. We increase the count and add each non-negative integer to the total. We divide the sum by the count at the conclusion of the loop.
Learn more about Decimal here:
https://brainly.com/question/30656295
#SPJ4
When an emergency vehicle sounds its sirens or uses a flashing light you must ________.
Answer:
О Turn on the flashing lights, slow down and give way to the emergency vehicle.
Explanation:
When an emergency vehicle sounds its sirens or using a flashing light you must:
Turn on the flashing lights.Slow down.Give way to the emergency vehicle.bconvert the decimal number into it's binary equivalent 25.625
it's quite simple
Explanation:
25.62510 in binary
11001.1012
A boy riding a bicycle can be modeled as a spring-mass-damper system with an equivalent weight, stiffness, and damping constant of 800 N, 50,000 N/m, and 1,000 N-s/m, respectively. The differential setting of the concrete blocks on the road caused the level surface to decrease suddenly, as indicated in Figure shown. If the speed of the bicycie is 5 m/s (18 km/hr), determine the displacement of the boy in the vertical direction Assume that the bicycle is free of vertical vibration before encountering the step change in the vertical displacement. Hint: Assume that the bicycie and the boy fall as a rigid body by 5 cm at point A. Thus the mass will be subjected to an initial downward displacement of 5 cm (t-0 assumed at point A). ed keq cm
The youngster has moved about 0.065 meters in the vertical direction (6.5 cm).
What was the purpose of the query?The front wheel will drop down as the bicycle hits the abrupt level change, giving the entire system a startling jolt. The initial downward displacement of the mass is 5 cm since it is expected that the bicycle and the youngster will fall as a rigid body at point A by a distance of 5 cm. With the provided parameters of weight, stiffness, damping constant, and beginning velocity, we can calculate the displacement of the boy in the vertical direction as roughly 0.065 m (6.5 cm) using the equation for the displacement of a spring-mass-damper system.
To know more about system consisting of a spring visit:
https://brainly.com/question/29613751
#SPJ1
Write code that outputs variable numWeeks as follows. End with a newline
Ex: If the input is.
3
the output is
Weeks: 3
1 import java.util.Scanner;
2
3 public class Output Test I
4 public static void main(String[] args) {
5 int numileeks;
6
7 //Our tests will run your program with input 3, then run again with input 6.
8 //Your program should work for any input, though.
9 Scanner scnr = new Scanner(System.in); 12
10 numileeks = scnr.nextInt
11
12 Os System.out.println(numeeks+ "3"); Your code goes here
14 }
15 }
The correct answer is Create a statement that prints the numItems variable. Add a newline to end. The programme will be evaluated using various input values. import scanner from java.util;.
You should be aware that there are five different sorts of variables before we continue. local variables, class variables, instance variables, global variables, and constants. A constant is a piece of data whose value is fixed during the course of a programme. As a result, the value is constant, just as its name suggests. A variable is a piece of data whose value may change while the programme is running. Hence, just as its name suggests, the value might change. There are two uses for constants. An experimental investigation normally includes three different kinds of variables: controlled factors, dependent variables, and independent variables.
To learn more about numItems variable click on the link below:
brainly.com/question/14480279
#SPJ4
The next day at SLS found everyone in technical support busy restoring computer systems to their former state and installing new virus and worm control software. Amy found herself learning how to install desktop computer operating systems and applications as SLS made a heroic effort to recover from the attack of the previous day.
Other than installing virus and worm control software, what can SLS do to prepare for the next incident?
She was grateful for the opportunity to gain this important knowledge, and she was even more grateful that SLS had taken the necessary precautions to safeguard their network from further attacks.
A network is a collection of networked devices that may exchange information, data, and resources. They are linked together by communication channels. It is a collection of two or more computing machines linked together to share resources, transfer files, or enable electronic communication. Networks can be local (LAN) or wide area networks, and they can be wired or wireless (WAN). Networking makes it easier for users to share resources like files, printers, and databases as well as communicate and work together. This is due to the fact that if a USB removable flash drive is attached to every computer in the office by an insider, and then an outsider sends an email to the company's General group mail, and the email contains a link that contains some infected worms and viruses, then every computer will be infected with the virus once someone clicks on the link in the email.
Learn more about A network here:
https://brainly.com/question/30666094
#SPJ4
A rectangle has a width of 8 m and a length of 7 m. How does the area change when each dimension is multiplied by 5? responses the area is increased by a factor of 5. The area is increased by a factor of 5. The area is increased by a factor of 10. The area is increased by a factor of 10. The area is increased by a factor of 25. The area is increased by a factor of 25. The area is increased by a factor of 50.
Answer:
The area is increased by a factor of 5.
Answer:
25
Explanation:
Encode the following decimal value into a IEEE 754 Single Precision Float: 10.6875 Format answer as 4-byte hex value (for example, AA45F000h).
1.1875 has the IEEE 754 encoding of 0xC2F00000. This is represented as 1 sign bit, 1000 0000 (binary), or 128 biassed exponent (decimal.
The sign bit is set to 0 for positive numbers and 1 for negative numbers when encoding a number in IEEE 754 format. The bias, which for single-precision values is 127, is subtracted to get the value of the exponent field, which is then multiplied by the power of 2 that should be used to multiply the mantissa. A binary fraction is then used to represent the mantissa. To encode -1.1875, for instance, the sign bit would be set to 1, the exponent field would be set to 128-127=1, and the mantissa would be set to 1110 0010 1111 0000 0000 0000 0000 0000.)
Learn more about IEEE 754 here:
https://brainly.com/question/30434739
#SPJ4
Submittal of bonds and insurance certificates should be submitted by the bidder to whom the contract has been awarded: A. at the time of submitting the original Bid. B. after receiving the Notice to Proceed from the owner/engineer. C. after receiving the Notice to Proceed, but before signing the Agreement. D. after receiving Notice of Award, but before owner signs the Agreement.
A buyer may meet with several potential suppliers to negotiate a potential acquisition at a bidding conference.
Certificate signing request is referred to as CSR. Request for certification is another name for it. When a candidate applies for a digital identity certificate, a message is sent to the security certificate authority. The applicant's public key is included in the certificate signing request. It includes the essential details, such as the domain name and digital signature. So, in order to obtain a fresh certificate, the administrator needs submit the CSR, or certificate signing request. The initial hearing is a less formal gathering where questions about the charges are put to the accused before a trial. Both sides might negotiate during the hearing in an effort to avoid holding a trial. The certification holders would automatically go to trial if they don't request a hearing first.
Learn more about CSR here:
https://brainly.com/question/13681474
#SPJ4
if humidity sensors are not used to control humidity, ? can control humidity by taking advantage of the relationships between temperature and humidity.
Temperature sensors can use the relationships between temperature and humidity to control humidity if humidity sensors are not utilized.
What benefits do temperature and humidity sensors provide?These instruments are used to measure the actual humidity of the air at any given location or point. When air conditions need to be controlled for a variety of reasons or when they may be extreme, such devices are frequently used.
Why is it crucial to keep an eye on the relative humidity?Controlling moisture around a finished product is by far and away the most important reason to monitor relative humidity. This typically entails ensuring that the RH does not rise too high.
To know more about Temperature sensor visit :-
https://brainly.com/question/14258631
#SPJ4
machine a has a reliability of 0. machine b has a reliability of 0.49. machine c has a reliability of 0.7. machine d has a reliability of 1. which machine is the most reliable? select
The most reliable machine is Machine D, with a reliability of 1. This means that it has the highest probability of successful operation without failure, whereas Machine A has a reliability of 0, meaning there is no probability of successful operation without failure.
Reliability can be measured in different ways, but it generally refers to the probability that a machine will perform its desired function correctly, without failure, for a given period of time.
which machine is the most reliable?Machine B has a reliability of 0.49, meaning there is a 49% chance of it performing correctly, Machine C has a reliability of 0.7, meaning there is a 70% chance of it performing correctly, and Machine D has a reliability of 1, meaning it has a 100% chance of performing correctly.
More information abaut the reliability here:
https://brainly.com/question/30667525
#SPJ11
Question 2 Generate four sinusoids with the following amplitudes and phases. Xi(t) = 5 cos (211 (15)t + 0. 51) X2 (t) = 5 cos (2n (15) t - 0. 25) x3 (t) = 5 cos (21 (15) t + 0. 411) X4 (t) = 5 cos (21 (15)t - 0. 9n) (a) Make a plot of all four signals over a range of t that will exhibit approximately 3 cycles. Make sure the plot includes negative time so that the phase at t = 0 can be measured. In order to get a smooth plot make sure that your have at least 20 samples per period of the wave. (b) Verify that the phase of all four signals is correct at t = 0 and also verify that each one has the correct maximum amplitude. Use subplot(3,2,i) to make a six-panel subplot that puts all of these plots on the same page. (c) Create the sum sinusoid via x5 (t) = x1(t) + x2(t) + x3 (t) + x4 (t). Make a plot of x5 (t) over the same range of time as used in the last plot. Include this as the lower panel in the plot by using subplot (3,1,3). (d) Measure the magnitude and phase of x5 (t) directly from the plot. In your lab report, include this plot with sufficient annotation to show how the magnitude and phase were measured. (e) Now do some complex arithmetic, create the complex amplitudes corresponding to the sinusoids x (t). Recall that x(t) = Acos(21864 +6)= Re{de'* ,254 Give the numerical values of 2, in polar and Cartesian form, where z = 4,21", i = 1,2,3,4,5 (t) Verify that x5 (t) = x1(t) + x2(t) + x3 (t) + x4(t). Show a plot of these five complex numbers as vectors. Relate the magnitude and phase of 3 to the plot of x (t) and explain
The cosine components to get the triangle's aspect are as follows: c = [a2 + b2 - 2ab cos C].
Where the triangle's edges are a, b, and c. The L is a remodel-pair that couples a DT sign with its continuous-frequency remodel and is primarily utilized in the assessment and design of DT systems. Lifestyles are essentially a way to ensure that the amount that constitutes a does not explode. It is easy to demonstrate this for sequences that can be summarized. The sum for n that ranges from minus infinity to plus infinity of x[n] instances e to the- j omega n in value is the same as the value of the at any factor omega if you take its value. Hence, F[cos0t] =[(0)+(+0)] is the Fourier transform of the cosine wave characteristic.
Learn more about Cosine here:
https://brainly.com/question/29891250
#SPJ4
in the 2010 toyota prius, a boost converter is used to step up the output voltage of the battery (assumed to have constant voltage of 200 v) to the dc-bus voltage level of 250 v. assuming the converter to be ideal, what is the duty cycles needed to do this at steady-state?
Boost converters can also supply power to smaller-scale equipment, including portable lighting systems.
A boost converter can increase the voltage from a single 1.5 V alkaline cell to provide the lamp with the 3.3 V that a white LED generally needs to emit light. High-frequency power conversion circuits known as DC-DC converters use inductors, transformers, and capacitors to reduce switching noise and produce regulated DC voltages. Even with fluctuating input voltages and output currents, closed feedback loops maintain constant voltage output. To "step-up" an input voltage to a higher level, needed by a load, the boost converter is utilized. By holding energy in an inductor and delivering it to the load at a greater voltage, this special feature is made possible.
Learn more about system here-
https://brainly.com/question/27162243
#SPJ4
what was henry ford's first of three basic principles of manufacturing
The first of Henry Ford's three basic manufacturing principles was standardization.
This principle was to create a standard product design and manufacturing process to streamline production and increase efficiency. By standardizing the design and manufacturing process, Ford was able to produce a large number of identical products quickly and at a lower cost. This principle was key to the success of the Ford Model T, which was produced using the same standardized design and manufacturing process for nearly two decades.
This principle was applied to the design and production of the Model T, allowing a large number of identical vehicles to be produced quickly and at lower cost. By standardizing the design and production process, Ford was able to ensure that the Model T was produced efficiently and consistently, allowing it to become one of the most successful and recognizable automobiles of the 20th century.
Lear more about manufacture of Henry Ford
https://brainly.com/question/2364290
#SPJ11
if the allowable tensile stress for the bar is and the allowable shear stress for the pin is determine the diameter of the pin so that the load p will be a maximum. what is this load? assume the hole in the bar has the same diameter d as the pin. take t in. and w 2 in.
The formula for calculating maximal shear stress is V*Q / I*b. To put it simply, this is 12*V / 8bh. V stands for shear force, b for cross-sectional width, and h for cross-sectional height.
The value determined from spring's experimental data is the acceptable shear stress. Additionally, the value varies slightly depending on the substance. For instance, it is 50% for piano wire, hard drawn steel wire, oil tempered steel wire, and stainless steel wire, and it is 55%. A safety factor and the object's yield strength, or the stress at which the thing will be irreversibly damaged, are used to establish the allowable stress. As a result, determining the materials' yield strength is the first step in estimating allowed stress.
Learn more about stress here-
https://brainly.com/question/13261407
#SPJ4
Online analytical processing (OLAP) involves the analysis of accumulated data by end users. True oflr False
Give a simple description of the language generated by the grammar with productions S → aaA,
A → bS,
S → λ
With the same amount of a's and b's for each s, it can be represented as s1bs2 (and is possibly empty).
Because S and L are strictly shorter than L, the induction hypothesis is true for each Sisi, and we are done. Every collection of characters that a script interprets literally is called a string. The phrases "hello world" and "LKJH019283" are examples of strings. In computer programming, a variable is linked to a string. Generally speaking, a string in programming languages can either be all letters or all digits (alphanumeric). A string may be composed entirely of numbers, which is supported by many languages; however, in this instance, the string is commonly referred to as an integer. d. "a,b"*: the quantity of a's equals the quantity of b's, V equals S, A, B, a, b. ∑ = { a,b } R = { S → ε S SASBS. A SBSAS. A → a
Learn more about Strings here:
https://brainly.com/question/29856207
#SPJ4
