Answer:
hyperlink
Explanation:
youwelcome:)
Which method of sending data uses routing?
Answer:
The Internet Protocol (IP) is the protocol that describes how to route messages from one computer to another computer on the network. Each message is split up into packets, and the packets hop from router to router on the way to their destination.
Explain why there are more general-purpose registers than special purpose registers.
Answer:
Explanation:
General purpose registers are used by programmer to store data whereas the special purpose registers are used by CPU for temporary storage of the data for calculations and other purposes.
The assignment is to get an integer from input, and output that integer squared, ending with newline. (Note: This assignment is configured to have students programming directly in the zyBook. Instructors may instead require students to upload a file). Below is a program that's been nearly completed for you.
Click "Run program". The output is wrong. Sometimes a program lacking input will produce wrong output (as in this case), or no output. Remember to always pre-enter needed input.
Type 2 in the input box, then click "Run program", and note the output is 4.
Type 3 in the input box instead, run, and note the output is 6.
When students are done developing their program, they can submit the program for automated grading.
Click the "Submit mode" tab
Click "Submit for grading".
The first test case failed (as did all test cases, but focus on the first test case first). The highlighted arrow symbol means an ending newline was expected but is missing from your program's output.
Matching output exactly, even whitespace, is often required. Change the program to output an ending newline.
Click on "Develop mode", and change the output statement to output a newline: print(userNumSquared). Type 2 in the input box and run.
Click on "Submit mode", click "Submit for grading", and observe that now the first test case passes and 1 point was earned.
The last two test cases failed, due to a bug, yielding only 1 of 3 possible points. Fix that bug.
Click on "Develop mode", change the program to use * rather than +, and try running with input 2 (output is 4) and 3 (output is now 9, not 6 as before).
Click on "Submit mode" again, and click "Submit for grading". Observe that all test cases are passed, and you've earned 3 of 3 points.
The issue in the code is that you're adding instead of multiplying the number by itself.
You can fix it by changing the second line to one of the two:
userNumSquared = userNum * userNum
or
userNumSquared = userNum ** 2
regular alerts asking you if you want to quit? Humane Design or Addictive Design
Explanation:
Its Addictive Design because :
In 1996, Dr Kimberly Young was one of the first scientists to warn against the addictiveness of computer use. That’s right, 25 years ago. Fast-forward to today, dark patterns are still rampant, and by forcing us to spend more time inside and online, the pandemic has accelerated the harmful effects of these mechanisms. Let’s take a look at Internet addiction, persuasive & addictive patterns.
11222222111111111111111112112
Answer:
33444444333333333333334334
Explanation:
Activity 1 1. How important is ICT in today's generation?
ICT help us to make research and it help us to know a lot of things about I.T
What is the difference between hardware and software?
(1 point)
A. Software is physical; hardware is not.
B. Hardware is physical; software is not.
C. Software is open-source; hardware requires a license.
D. Hardware is open-source; software requires a license.
Answer:
b
Explanation:
What's one way to help close the digital divide?
Pretend that you must explain your favorite information technology pathway to a friend that is in middle school. Select one of the information technology pathways (your preferred I.T. pathway) explain why it is your favorite pathway, and describe specific careers available within that pathway.
Information Support & Services
Network Systems
Programming & Software Development
Web & Digital Communications
YOU HAVE TO WRITE PLEASE I BEG SOMEONE WRITE THIS PLEASE
The one of the information technology pathways that is my most preferred I.T. pathway is Web & Digital Communications.
What is the Web and digital communication?The web and digital communication pathway is known to be one that is made of people or workers who are said to be involved in the act of making, designing as well as creating of interactive multimedia products as well as services.
It is also made up of the development of digitally made or computer-enhanced kind of media that is often used in business, training, communications and others and this is the reason why i love it.
Therefore, The one of the information technology pathways that is my most preferred I.T. pathway is Web & Digital Communications.
Learn more about Digital Communications from
https://brainly.com/question/13171893
#SPJ1
What is the output?
int x=5;
if( x > 5)
cout << "x is bigger than 5. ";
cout <<"That is all. ";
cout << "Goodbye\n";
The output of the given program is "That is all. Goodbye"
What is an Output?This refers to the result or information that is gotten from a computer system after processing has been done.
Hence, we can see that if-else conditional statement is used and it should prompt the user for input, but the output based on this code fragment is "That is all. Goodbye"
The given code is:
int x=5;
if( x > 5)
cout << "x is bigger than 5. ";
cout <<"That is all. ";
cout << "Goodbye\n";
Read more about output here:
https://brainly.com/question/25983065
#SPJ1
What is the final step in conducting a competitive audit? (UX)
Outline the goals
Create a list of your competitors
Summarize your findings
Research each product
The final step in conducting a competitive audit is create a list of your competitors. The correct option is B.
What is competitive audit?A UX competitive analysis is a technique used by UX researchers to understand the competition, identify opportunities, and gain a competitive advantage.
This analysis provides valuable insights to UX design teams in developing a UX strategy to improve a product's user experience and business value.
The final step in conducting a competitive audit is to examine the competitor's overall market performance.
You can learn more about what the target customers are looking for by reading reviews and testimonials left by previous customers on review sites or social media platforms.
Thus, the correct option is B.
For more details regarding audit, visit:
https://brainly.com/question/14652228
#SPJ1
Overestimating project complexity is a common cause of project creep. True or False?
The given statement: "Overestimating project complexity is a common cause of project creep" is FALSE
What is a Project?This refers to the undertaking that is done by an individual or group to achieve a set goal.
Hence, we can see that The given statement: "Overestimating project complexity is a common cause of project creep" is FALSE and this is because the main cause of project creep is the underestimation of the project
This is because when project creep occurs, this is mostly as a result of the underestimation of the project and not overestimation.
Read more about project planning here:
https://brainly.com/question/15410378
#SPJ1
Which of the problems McQuilkin and Copan mention in Chapter 11 are most important — that is which is the most compelling reason to reject Evolutionary Ethics and why.
A compelling reason that is valid enough to reject evolutionary ethics is that moral sense is not the only by-product of evolution.
This is because evolutionary ethics h1nges mostly on the interaction between philosophy and the natural sciences and the belief that natural selection had instilled morality in humans.
What is Evolutionary Ethics?This refers to the study of the relationship between the theory of natural selection and ethical theory and practice.
Hence, we can see that A compelling reason that is valid enough to reject evolutionary ethics is that moral sense is not the only by-product of evolution.
This is because evolutionary ethics h1nges mostly on the interaction between philosophy and the natural sciences and the belief that natural selection had instilled morality in humans.
Read more about Evolutionary Ethics here:
https://brainly.com/question/14569807
#SPJ1
did anyone can help me css code please I really need help
The coder assigned a CPT code to "x-ray, right femur" and an ICD-10-CM code to "fracture, right humerus." The health insurance company denied
reimbursement for the submitted claim due to lack of medical necessity. What action should the provider's office take?
The action that the provider's office need to take is that the provider's office need to review the codes and ensure sure they are the correct ones. The provider then need to inform the coder to do a lot of investigation on the code as well as also add a lot of details to all of the code.
What is the issue about?The provider's office in the above case of the fracture need to look through the claim and the patient record to be able to tell if the patient has gotten a fractured femur or a fractured humerus.
Therefore, The action that the provider's office need to take is that the provider's office need to review the codes and ensure sure they are the correct ones. The provider then need to inform the coder to do a lot of investigation on the code as well as also add a lot of details to all of the code.
Learn more about fracture from
https://brainly.com/question/5404553
#SPJ1
Q: Health care providers are responsible for documenting and authenticating legible, complete, and timely patient records in accordance with federal regulations and accrediting agency standards. The provider is also responsible for correcting or altering errors in patient record documentation. A patient record documents health care services provided to a patient and includes patient demographic data, documentation to support diagnoses and justify treatment provided, and the results of treatment provided.
The coder assigned a CPT code to "x-ray, right femur" and an ICD-10-CM code to "fracture, right humerus." The health insurance company denied reimbursement for the submitted claim due to lack of medical necessity. What action should the provider's office take?
Which access control method relies on access being defined in advance by system administrators?
Please help me with this Python coding assignment
The complete code to help you ask for numbers and then produce the square of the number as output is given below:
The Programuser_num = int(input('Enter integer:\n'))
print("You entered: ", user_num)
print(user_num, "squared is ", user_num*user_num)
print("And", user_num, "cubed is", user_num*user_num*user_num, "!!")
user_num2 = int(input("Enter another integer:\n"))
print(str(user_num) + str(user_num2), "is", user_num+user_num2)
print(str(user_num) * str(user_num2), "is", user_num*user_num2)
The OutputEnter integer:
4
You entered: 4
4 squared is 16
And 4 cubed is 64 !!
Enter another integer: 5
4 + 5 is 9
4 * 5 is 20
Read more about programming here:
https://brainly.com/question/23275071
#SPJ1
What is the first step you must complete before modifying a form in Word?
O Ask for permission from the last person to modify it.
Remove any protections that restrict editing.
O Fill in the form so you know what it will look like.
O Share the form with anyone you want to complete the form.
Answer:
The correct answer is B, Remove any protections that restrict editing
Explanation:
You're welcome and have a nice day :)
A design team is working on an app for a government information tool and suggests this problem statement: Casey just moved to the area and needs to get information about setting up utilities because he doesn’t know who to contact. What element is missing in the problem statement?
User name
Insight
User characteristics
User need
Answer:
User characteristics
Explanation:
Which of these terms refers to a paper printout?
Answer:
A term that refers to a paper printout is a hardcopy output.
Explanation:
Any output that is available in paper form is typically referred to as a hard copy. It served as a word to set it apart from soft copy (which referred to any electronic form). It was talking about how the paper version appeared to be permanent; you couldn't update the data on a hard copy format without it being clear.
Data that was seen on a screen or saved to disk was considered soft copy, whereas data that was printed out was considered hard copy.
Thanks,
Eddie
If a programmer dragged this code block onto the workspace, what would it do?
The result of dragging the code into a workspace is to cause an event that corresponds to an input entered by the player
How to determine the result of dragging the code into a workspace?The code segment is given as
on A button pressed
In this case, the italicized texts or characters are the actions
The code may or may not represent sprites
As a general rule, sprites are program objects used to create animations.
From the question, we have the following highlights
The code is to perform or trigger an eventWhen the key button A is pressedThis means that the result of dragging the code into a workspace is to cause an event that corresponds to an input entered by the player
In this case, the input is the alphabet letter A
Hence, the result of dragging the code into a workspace is to cause an event that corresponds to an input entered by the player
Read more about code segments at
https://brainly.com/question/26561906
#SPJ1
I NEED ASAP
Write a technical document (at least 500 words in length).
Identify the step-by-step instructions needed to operate a tool, design a system, or explain the bylaws of an organization.
Include all factors and variables that need to be considered.
Use headings, different fonts and other formatting techniques to aid in organization and comprehension.
PLEASE I CAN'T FIND SOMETHING THAT WILL MAKE 500 WORDS
Answer: The above question wants to analyze your writing skill, for that reason I can't write the document for you, but I will show you how to do it.
First, you will have to search for a tool that you want to present in your document. Also, you should research how this tool works.
A technical document needs to present a technical language, that is, you need to use professional words, in addition to maintaining a standard and formal language.
Steps to write the document:
Introduce the tool.
Show situations where it should be used.
Present a tutorial for the efficient use of the tool.
Be clear and objective, presenting direct information.
Explanation:
Can you solve this program?
The attributes of the InventoryTag object red_sweater with sample output for the given program with inputs: 314 500 ID: 314 Qty is given:
The AttributesSample output for the given program with inputs: 314 500
ID: 314
Qty: 500
1 class InventoryTag:
2 def __init__(self):
3 self. item_id
4 self. quantity remaining – olol
5
6 red_sweater – InventoryTag
7 red sweater. itemid input
8 red_sweater. quantity remaining – input
9 def split. check(check_amount, numdiners, tax rate 0.09, tip. rate 0.15):
10 return check mount (180 + tip. rate 100 tax rate 100)/(100 num diners)
Read more about computer programs here:
https://brainly.com/question/23275071
#SPJ1
Sophia's plays her favorite game on her phone, where the game uses the phone's
camera to overlay images on real-world scenery. What type of game is Sophia
playing?
(1 point)
O virtual reality
O augmented reality
O multiplayer game
O virtual puzzle
Answer:
Augmented Reality
Explanation:
Augmented reality is a camera to overlay images on real-world scenery. Basically what the Pokemon GO app does.
Hello, I've tried everything and I cannot get this code to be fair. I need help. Can someone provide guidance so I can understand how to formulate the proper code for this question so I can understand how it should be set up in Python or Python #. Thanks truly. I really appreciate a response. Enjoy your day:
2.26 LAB: Seasons
Write a program that takes a date as input and outputs the date's season. The input is a string to represent the month and an int to represent the day.
Ex: If the input is:
April
11
the output is:
Spring
In addition, check if the string and int are valid (an actual month and day).
Ex: If the input is:
Blue
65
the output is:
Invalid
The dates for each season are:
Spring: March 20 - June 20
Summer: June 21 - September 21
Autumn: September 22 - December 20
Winter: December 21 - March 19
A program that takes a date as input and outputs the date's season. The input is a string to represent the month and an int to represent the day is given below:
The Programinput_month = input()
input_day = int(input())
months= ('January', 'February','March', 'April' , 'May' , 'June' , 'July' , 'August' , 'September' , "October" , "November" , "December")
if not(input_month in months):
print("Invalid")
elif input_month == 'March':
if not(1<=input_day<=31):
print ("Invalid")
elif input_day<=19:
print("Winter")
else:
print ("Spring")
elif input_month == 'April' :
if not(1<=input_day<=30):
print("Invalid")
else:
print("Spring")
elif input_month == 'May':
if not(1<=input_day<=31):
print("Invalid")
else:
print("Spring")
elif input_month == 'June':
if not(1<=input_day<=30):
print("Invalid")
elif input_day<=20:
print ("Spring")
else:
print("Summer")
elif input_month == 'July' or 'August':
if not(1<=input_day<=31):
print("Invalid")
else:
print("Summer")
elif input_month == 'September':
if not(1<=input_day<=30):
print("Invalid")
elif input_day<=21:
print ("Summer")
else:
print ("Autumn")
elif input_month == "October":
if not(1<=input_day<=31):
print("Invalid")
else:
print("Autumn")
elif input_month == "November":
if not(1<=input_day<=30):
print("Invalid")
else:
print ("Autumn")
elif input_month == "December":
if not(1<=input_day<=31):
print("Invalid")
elif input_day <=20:
print ("Autumn")
else:
print ("Winter")
elif input_month == 'January':
if not(1<=input_day<=31):
print("Invalid")
else:
print("Winter")
elif input_month == "February":
if not(1<=input_day<=29):
print("Invalid")
else:
print ("Winter")
Read more about programming here:
https://brainly.com/question/23275071
#SPJ1
Currently, the motherboard is set to boo from either a UEFI device or a legacy BIOS device, and the one HDD boots as a legacy device. If you change the motherboard to boot only in UEFI mode, what can you do to this HDD so that it will still work as a boot device for this system?
Answer: The HDD must be partitioned with GPT to serve as a UEFI boot device.
The action you can do to this HDD so that it will still work as a boot device for this system is The HDD must be partitioned with GPT to serve as a UEFI boot device.
Based on the fact that the motherboard is set to boo from either a UEFI device or a legacy BIOS device, to change the motherboard to boot only in UEFI mode, you would need to partition the HDD.
What is Booting?This refers to the process of a computer coming on from a relaxed or off state.
Hence, we can see that The action you can do to this HDD so that it will still work as a boot device for this system is The HDD must be partitioned with GPT to serve as a UEFI boot device.
Based on the fact that the motherboard is set to boo from either a UEFI device or a legacy BIOS device, to change the motherboard to boot only in UEFI mode, you would need to partition the HDD.
Read more about BIOS device here:
https://brainly.com/question/17101708
#SPJ1
Can you solve this question?
The answer to the given code question is:
class PatientData(): #declaration of PatientData class
height_inches=0 #attribute of class is declared and initialized to 0
weight_pounds=0 #attribute of class is declared and initialized to 0
The Program#below is the class PatientData() that has two attributes height_inches and weight_pounds and both are initialized to 0
class PatientData():
height_inches=0
weight_pounds=0
patient = PatientData() #patient object is created of class PatientData
#below are the print statements that will be displayed on output screen to show that patient data before
print('Patient data (before):', end=' ')
print(patient.height_inches, 'in,', end=' ')
print(patient.weight_pounds, 'lbs')
#below print statement for taking the values height_inches and weight_pounds as input from user
patient.height_inches = int(input())
patient.weight_pounds = int(input())
#below are the print statements that will be displayed on output screen to show that patient data after with the values of height_inches and weight_pounds input by the user
print('Patient data (after):', end=' ')
print(patient.height_inches, 'in,', end=' ')
print(patient.weight_pounds, 'lbs')
Read more about programming here:
https://brainly.com/question/23275071
#SPJ1
why photography came to be invented in the 1800s ?
Explanation:
Did you mean why it became invented well. Because photography allowed a glimpse of the past in new and utterly novel ways, it altered the perception of familiar places and things. Suddenly, one could move away from home but preserve a photograph of a birthplace, study the likeness of a dead relative, or see what a parent had looked like as a child.
Select the correct answer.
Which of the following can computer maintenance software determine?
✓
A. whether your hard drive is about to fail
whether your monitor or screen is drawing too much power
the humidity inside your desktop computer
B.
C.
OD.
D. the amount of dust inside your laptop
Answer:
Explanation:
It is B, this is because your hard drive is the part of your computer that makes it work, and what helps run the maintenance software. there is no exact way of telling if your hard drive is going to fail.
On the other hand, your maintenance software can correctly determine which apps and widgets are drawing power, including your monitor screen. It can adjust the settings, or you can manually, so it draws less power.
It cannot determine humidity in your laptop or the amount of dust in your laptop, sadly.
Hope this helps!!^^
Which of the following is the BEST solution to resolve the corrosion issue? ○Check and clean all corroded server motherboards.
○Replace motherboards in the servers more frequently.
○Decrease the humidity in the data center.
○Run a diagnostic check on all servers to make sure they are functioning properly.
The statement that illustrates the best solution to resolve the corrosion issue is as follows:
Replace motherboards in the servers more frequently.Thus, the correct option for this question is B.
What is the Corrosion issue?The corrosion issue may be defined as a type of concern that significantly destructs the efficiency of the computer system due to the accumulation of numerous junk files. It reduces the overall speed of the system as well.
According to the context of this question, it is required to replace motherboards in the servers more frequently. This is because it is the ultimate to the corrosion issue and try to install some application that prevents the entry of unnecessary junk files in the media.
Therefore, the correct option for this question is B.
To learn more about Motherboards, refer to the link:
https://brainly.com/question/2114613
#SPJ1
