Answer:
Sink
Explanation:
For a substance to float in water, it must be less dense than water. The density of water is 1 g/cm^3. To find the density of the substance, we can do mass/volume, which in this case is 25g/7cm^3. We see that [tex]25/7 > 1[/tex], so the substance would sink.
How many moles is 25g of ammonia (NH3)?
Explanation:
Ammonia has a formula mass of 17.031 g/mol, so the top blank is 1 and the bottom blank is 17.031
Calculating the product, we get the answer to be 1.5 mol
A car's tires are inflated to 2.11 atm at 25c. after driving to the grocery store, the tires are at 2.25 atm. what is the temperature of the air in the tire after the drive?
Answer:
T₂ = 26.7 °C
Explanation:
Because you are dealing with pressure and temperature, you can use Gay-Lussac's Law to find the final answer. The equation looks like this:
P₁ / T₁ = P₂ / T₂
In this form, "P₁" and "T₁" represent the initial pressure and temperature. "P₂" and "T₂" represent the final pressure and temperature. You have been given the values for all of the variables but "T₂". Therefore, by plugging these values into the equation, you can simplify to find "T₂".
P₁ = 2.11 atm T₁ = 25 °C
P₂ = 2.25 atm T₂ = ?
P₁ / T₁ = P₂ / T₂ <--- Gay-Lussac's Law equation
(2.11 atm) / (25 °C) = (2.25 atm) / T₂ <--- Plug variables into equation
0.0844 = (2.25 atm) / T₂ <--- Divide 2.11 by 25
(0.0844) x T₂ = 2.25 atm <--- Multiply both sides by T₂
T₂ = 26.7 <--- Divide both sides by 0.0844
Is the relationship between temperature and water density an inverse or direct relationship?
The relationship between temperature and water density is an inverse relationship.
Temperature:-A measure of the typical kinetic energy of the atoms or molecules in a system, the temperature is a physical variable that expresses hot and cold.
Density:-The definition of density is the mass of a substance per unit volume. Density is defined as the ratio of mass to volume, or mass per unit volume.
Relation between temperature and density:-An inverse relationship exists between temperature and density. The density of water drops because of the increased distance between water molecules as temperature rises. Water's density rises when its temperature drops, but only to a certain extent.
Learn more about Temperature and Density here:-
https://brainly.com/question/18696730
#SPJ4
Which of the mentioned are the principal constituents of an organic compound?
O
O
O
Carbon, Oxygen and Nitrogen
Carbon, Oxygen and Hydrogen
Carbon, Oxygen and Sulphur
Carbon, Oxygen and Sulphur
Answer:
the basic element of organic compounds is carbon and they are called organic because associate with the living organism so the correct answer is
How much percent of shops are in the city? How about in the country?
HELP PLS WILL GIVE BRAINLY FAST
Answer:
I would say there would be 5-10% in a city, and maybe 10-20% in the country. It mainly varies depending on how big the city is, how many people/districts there are, and the size of the country, which makes it hard to give a certain percent of shops, as there may be small businesses included as well or new shops being built.
Hope this helps! This was pretty confusing for me as well so i hope the answer is alright (×﹏×)
Write the formula and calculate the molecular mass of
1) Soda ash
2) Baking Soda
3) Lime Stone
4) Ethanol
5) Common Salt
The molecular formula is the sum of the atomic masses of all atoms in the molecule.
The formula of Soda Ash:
Na₂CO₃ is also known as Sodium Carbonate.
The molecular mass of Soda Ash is
(2×Na)+(1×C)+(3×O)=106g/mol
The formula of Baking Soda:
NaHCO₃ is also known as Sodium bicarbonate.
The molecular mass of Baking Soda is
(1×Na)+(1×H)+(1×C)+(3×O)=84g/mol
The formula of Lime Stone:
CaCO₃ is also known as Calcium carbonate.
The molecular mass of Lime Stone:
(1×Ca)+(1×H)+(1×C)+(3×O)=100g/mol
The formula of Ethanol:
C₂H₅OH is the formula of ethanol.
The molecular mass of Ethanol:
(2×C)+(6×H)+(1×O)=46g/mol
The formula of Common Salt:
NaCl is also known as Sodium chloride.
The molecular mass of Common Salt:
(1×Na)+(1×Cl)=58.5g/mol
Learn more about chemical formulas here:
https://brainly.com/question/26694427
#SPJ10
pls help.
Dr. AT is studying the effect playing music has on plant growth. To do this she sets up three greenhouses each growing pea plants. One of the greenhouses plays classical music to the plants all day, the second greenhouse plays pop music, while the third is silent. All other factors, such as water and sunlight are identical between the three greenhouses. After two weeks, Dr. AT measures each pea plant and records her data. What greenhouse is the control group in this experiment?
A. The silent greenhouse.
B. The pop music greenhouse.
C. The classical music greenhouse.
D. The height of the plants.
Answer:
c or d
Explanation:
it says it was playing classic music
In this case, the control group or control variable is the greenhouse where the plants are grown in silence, as this group does not receive any music treatment. Therefore, the correct answer is A.
Variables can be defined as any characteristics, number or a quantity that can be measured . It is also called as a data item . It is called as variable because it can vary and can also have wide variety of values.
There are 3 types of variables 1) manipulated variable where the condition is specified, 2) responding variable which is dependent on the manipulated variable 3)controlled variable which does not change.
In this experiment, the control group is the group that does not receive the experimental treatment and serves as a basis for comparison.
Thus, the correct answer is A , the silent greenhouse.
Learn more about variables,here:
https://brainly.com/question/15078630
#SPJ5
A chemical change Group of answer choices occurs when powdered lemonade is stirred into water. occurs when methane gas is burned. occurs when water is vaporized. occurs when salt is dissolved in water. occurs when paper is shredded.
A Chemical change occurs when methane gas is burned.
What is Chemical change ?A chemical change is a change of materials into another, new materials with different properties and one or more than one new substances are formed.
A chemical change occurs when matter undergoes a change to form a new substance with different chemical properties, and the reaction is usually not reversible.
In this case,burning of methane gas (CH₄) considered as chemical change.
Oxygen and methane are the reactants, while the new substance formed from the reaction are carbondioxide (CO₂) and water (H₂O) as ;
CH₄ + O₂ ---> CO₂ + H₂O
Hence, Chemical change occurs when methane gas is burned.
Learn moe about chemical change here ;
https://brainly.com/question/23693316
#SPJ1
Which word equation shows Hydrogen reacting with oxygen to form water
Answer:
H + 02 = H2O
Explanation:
How does gravity depend on the mass of two objects
Gravity increases as the mass of either object increases.
What is gravity?Gravity is the force by which a planet or other body draws objects toward its centre. The force of gravity keeps all of the planets in orbit around the sun.
Since the gravitational force is directly proportional to the mass of both interacting objects, more massive objects will attract each other with a greater gravitational force. So as the mass of either object increases, the force of gravitational attraction between them also increases.
Learn more about the gravity here:
https://brainly.com/question/4014727
#SPJ1
PLEASE HURRY!! WORTH 50 POINTS!
A mixture of three noble gases has a total pressure of 1.25 atm. The individual pressures exerted by neon and argon are 0.68 atm and 0.35 atm, respectively. What is the partial pressure of the third gas, helium?
0.22 atm
0.33 atm
1.03 atm
2.28 atm
Answer:
P total = 1.25 atm
neon = 0.68 atm
argon= 0.35 atm
helium= x
1.25=0.68+0.35+x
1.25-0.68-0.35=x
x=0.22 atm
Considering the activity series given below for metals and nonmetals, which reaction will occur? Al > Mn > Zn > Cr > Fe > Cd > Co > Ni > Sn > Pb > H > Sb > Bi > Cu > Ag > Pd >Hg > Pt F > Cl > Br > I
(a) 2NaBr + I2 --> 2NaI + Br2
(b) 2Fe + Al2O3 --> 2Al + Fe2O3
(c) 2AgNO3 + Ni --> Ni(NO3)2 + 2Ag
(d) Pb + Zn(C2H3O2)2 --> Zn + Pb(C2H3O2)2
(c) 2AgNO3 + Ni --> Ni(NO3)2 + 2Ag
PLS HELP
4. T or F X-rays, ultraviolet light, and gamma rays all can travel through interplanetary space, so they are examples of waves.
5. What happens to the amplitude of water waves as you get farther from the disturbance that caused them? Why?
4. True
5. The amplitude of the ripples decreases as the circumference of the circle increases.
What is a wave?A wave is a disturbance that moves energy from one place to another.
Radio waves, gamma-rays, visible light, and all the other parts of the electromagnetic spectrum are electromagnetic radiation. Electromagnetic radiation can be described in terms of a stream of mass-less particles, called photons, each travelling in a wave-like pattern at the speed of light. Hence, the statement is true.
As the disturbance moves outwards the energy it carries is spread over a larger and larger region called the wavefront. For example, the ripples in the water lie in a circle with an ever-increasing circumference. The amplitude of the ripples decreases as the circumference of the circle increases.
Learn more about the Electromagnetic wave here:
https://brainly.com/question/3101711
#SPJ1
7.0 mol Mn reacts with 5.0 mol
O2 according to the equation below:
2Mn+0₂ → 2MnO
How many moles of MnO form from7.0 mol Mn?
[?] mol MnO
Round your answer to the tenths place.
Answer:
= 7 moles Mno
Explanation:
We have been asked to determine the number of moles required to form MnO.
Mole ratio
Mn : MnO = 1 : 1
The reaction ratio therefore is 1 : 1
Thus 7 moles of Mn react to form 7 moles MnO since we have similar ratio.
Answer:
The answer that I got was 7.0.
Explanation:
It said round to the tenths place so put the .0 after the seven and see if that helps.
The absorption spectrum of sodium is shown below. What do the two dark
vertical lines in the spectrum show about sodium atoms?
Absorption spectrum
700
600
500
400 nm
OA. A sodium atom gives off all wavelengths except those two when
an electron moves to lower energy levels.
OB. A sodium atom gives off those two wavelengths when an electron
moves to a higher energy level.
OC. Only those two wavelengths can cause an electron to move to a
higher energy level.
OD. All wavelengths except those two cause an electron to move to a
lower energy level.
SUBMIT
The two dark vertical lines in the spectrum shows that all wavelengths except those two cause an electron to move to a lower energy level. Hence, Option (D) is correct
What is Absorption Spectrum ?
A spectrum of electromagnetic radiation transmitted through a substance, showing dark lines or bands due to absorption at specific wavelengths.
The given fact is explained by the energy levels that electrons may be in are quantized, or vary by a specific amount.
When electrons go from one energy level to another, the difference in those energy level is a specific value, and not a range of values.
If they are transitioning upwards towards a higher energy, they will absorb the photons corresponding to the wavelength of light which has the specific amount of energy they need to ascend, resulting in dark lines.
Similarly, when the electrons transition from higher to lower energy, the same specific amount of energy is released and the emission spectrum shows lines in the places where the absorption spectrum was dark.
Hence, The two dark vertical lines in the spectrum shows that all wavelengths except those two cause an electron to move to a lower energy level. Therefore, Option (D) is correct
Learn more about spectrum here ;
https://brainly.com/question/11837978
#SPJ1
Question 3 of 25
Which statement describes a question that can guide the design of a
scientific investigation?
OA. It asks about whether a controlled variable is necessary.
B. It asks about the preferred outcome of the investigation.
C. It asks about how the observations will be organized.
D. It asks about a cause-and-effect relationship between two
variables.
The statement that describes a question that can guide the design of a scientific investigation could be about the necessity of a controlled variable. The correct answer is A.
What is a controlled variable?It is a variable whose values are controlled by the researcher during the course of experimental investigations.
When designing an experiment, it is necessary to identify the different variables that would be involved for a successful investigation.
Variables can be independent, dependent, controlled, or constant. Identifying the necessary variables will help in designing the experiment.
More on variables can be found here: https://brainly.com/question/15740935
#SPJ1
In a titration, 25.0 mL of a 0.40 M NaOH solution is used to neutralize 10.0 mL of HCl. Calculate the molarity of the acid.
The molarity of the HCl acid will be 0.001 M.
What is Neutralization ?A neutralization reaction is when an acid and a base react to form water and a salt and involves the combination of H⁺ ions and OH⁻ ions to generate water.
This is the neutralization of a strong acid (HCl) and a strong base (NaOH), which is ruled by this equation :
HCl (aq) + NaOH (aq) → NaCl (aq) + H₂O (l)
Mole Ratio : 1 mol HCl : 1 mol NaOH
Formula used ;
Molarity = number of moles / Volume (in liters)
Solve for n ;
n = M × V
Substitute values and compute ;
n = 0.40 M × 0.025 liter = 0.01 moles NaOH.
As the molar ratio is NaOH : HCl
Therefore, there will be same number mole for the HCl
Now, Molarity of HCl Solution ;
Molarity = n / volume
Molarity = 0.01 / 10
= 0.001 M HCl
Hence, The molarity of the HCl acid will be 0.001 M.
Learn more about neutralization here ;
https://brainly.com/question/16188332
#SPJ1
If you have half a mole of octane (c8h18), how much water is produced? 2c8h18 + 25o2 --> 16co2 + 18h2o
Answer:
4.5 moles H₂O
or
81.072 g H₂O
Explanation:
I am not exactly sure whether you want moles H₂O or grams H₂O. So, I'll calculate both. To find the moles H₂O, you'll need to covert moles C₈H₁₈ to moles H₂O via the mole-to-mole ratio from the reaction coefficients. To find the grams H₂O, you need to convert moles H₂O to grams H₂O via the molar mass.
2 C₈H₁₈ + 25 O₂ ---> 16 CO₂ + 18 H₂O
0.5 mole C₈H₁₈ 18 moles H₂O
----------------------- x ------------------------- = 4.5 moles H₂O
2 moles C₈H₁₈
Molar Mass (H₂O): 2(1.008 g/mol) + 16.00 g/mol
Molar Mass (H₂O): 18.016 g/mol
4.5 moles H₂O 18.016 g
---------------------- x ---------------- = 81.072 g H₂O
1 mole
1.How many sodium ions are there in 78.6 g of sodium phosphate?
Answer:
two
Explanation:
45.8 grams of copper requires 1172 J of heat to reach a final temperature of 100.5 ℃. What was the initial temperature? Specific heat of copper is 0.385 J/g℃. (7.02)
A. 66.5[?][?][?]
B. 122[?][?][?]
C. 34.0[?][?][?]
D. 75.2[?][?][?]
I also have no idea what the [?][?][?] is. Can someone please help me for 25 points? :'(
Answer: Option A, 66.5
Explanation:
So you want to use the heat capacity formula
So, q(heat)=m(mass) * cp (specific heat) * DeltaT (change in temp)
so m=45.8, cp =0.385, q=1172
you dont have the final temp for DeltaT so you have to fill in and divide
1172 = (45.8) * (0.385) * Delta T
1172 = 17.633 * DeltaT (Now divide)
1172/17.633 = Delta T
66.46 = Delta T, rounded you get 66.5 or option A
For the reaction C+ 2H2 → CH4, how many grams of hydrogen are required to produce 5 moles of
methane, CH4 ?
Round your answer to the nearest tenth. If you answer is a whole number like 4, report the answer
as 4.0
Use the following molar masses. If you do not use these masses, the computer will mark your
answer incorrect.:
Element
Hydrogen
Carbon
Molar Mass
1
12
10 mol of H₂ required to produce 5 moles of methane (CH₄)
What is Mole ratio ?Mole Ratio is a conversion factor between compounds in a chemical reaction, that is derived from the coefficients of the compounds in a balanced equation.
The mole ratio is therefore used to convert between quantities of compounds in a chemical reaction.
Given reaction ;
C + 2H₂ -------> CH₄
from reaction 2 mol 1 mol
from the question x mol 5 mol (given)
Now,
x = 2 x 15 / 1 = 10 mol
= 10 mol of H₂.
Hence, 10 mol of H₂ required to produce 5 moles of methane (CH₄)
Learn more about mole here ;
https://brainly.com/question/20486415
#SPJ1
What is the correct formula that would result from the combination of the two ionic species?
Cs¹+ and Cl¹-
Answer:
CsCl
Explanation:
The ionic species are:
Cs⁺ and Cl⁻
Identify different hydro-meteorological hazards;
Hydrometeorological hazards are caused by extreme meteorological and climate events, similar as cataracts, famines, hurricanes, tornadoes, or landslides.
Hydrometeorology it’s a branch of meteorology and hydrology that studies the transfer of water and energy between the land face and the lower atmosphere.They regard for a dominant bit of natural hazards and do in all regions of the world, although the frequency and intensity of certain hazards and society’s vulnerability to them differ between regions. Severe storms, strong winds, cataracts, and famines develop at different spatial and temporal scales, but all can come disasters that beget significant structure damage and claim hundreds of thousands of lives annually worldwide. hourly, multiple hazards can do contemporaneously or spark slinging impacts from one extreme rainfall event.In addition to causing injuries, deaths, and material damage, a tropical storm can also affect in flooding and mudslides, which can disrupt water sanctification and sewage disposal systems, beget overflow of poisonous wastes, and increase propagation of mosquito- borne conditionsTherefore these are the hydro-meteorological hazards.
learn more about hydro-meteorological hazards here:
https://brainly.in/question/1347588
#SPJ10
Willing to give Anyone 17+ points to anyone who can help with this. Barium can form ions with a +2 charge. Is it a cation or an anion?
Barium can form ions with a +2 charge and it is called a cation.
Ex:- Ba(s)+2HCl(aq)→BaCl2(aq)+H2(g)
In this redox reaction,
initially, barium shows 0 (s) oxidation no. and after forming the product its oxidation no. changes to +2 (in aq).
When a metal loses electrons and a nonmetal gets those electrons, cations (positively charged ions) and anions (negatively charged ions) are created.
Ionic bonds are created when a metal and a nonmetal interact. The position of an element on the periodic table can frequently tell you what charge an ion generally carries:the alkali metals (the IA elements) lose a single electron and form a 1+ charge. the alkaline earth metals (IIA elements) lose two electrons and form a 2+ cation.IIIA family member aluminum loses three electrons to become a 3+ cation.Seven valence electrons are shared by all of the halogens (VIIA elements) and each of them has a single negative charge, forming an anion.The VIA elements pick up two electrons to create 2- charged anions.The VA elements pick up three extra electrons to create 3- charged anions.To know more about elements of the periodic table refer to:-
https://brainly.com/question/25916838
#SPJ10
Why are reaction orders not always equal to the coefficients in a balanced chemical equation?
The reaction order is given as the relationship between the concentrations of the reactants and the rate of a reaction.
The order of a rate law is the sum of the exponents of the concentration of the reactants.The rate law of a reaction is used to understand the composition of the reaction mixture. Specifically, the reaction order is the exponent to which the concentration of that reactants are raised, and it indicates that how well the concentration of a reactants affects the rate of a reaction.There are number of methods used to determine the reaction order. Reaction orders not always equal to the coefficients in a balanced chemical equation , it only determined the number of molecules per mole present in a given reaction.Learn more about order of reaction here..
https://brainly.com/question/8139015
#SPJ10
S + 6 HNO3 → H₂SO4 + 6 NO₂ + 2 H₂O
-
In the above equation, how many grams of water can be made when 5.8 moles of HNO3 are consumed?
Round your answer to the nearest tenth. If you answer is a whole number like 4, report the answer
as 4.0
Use the following molar masses. If you do not use these masses, the computer will mark your
answer incorrect.:
Element
Molar
Mass
Hydrogen 1
Nitrogen 14
Sulfur
32
Oxygen 16
35 g (Rounded to the nearest tenth) H₂O can be made when 5.8 moles of HNO₃ are consumed.
What is Mole ratio ?Mole Ratio is a conversion factor between compounds in a chemical reaction, that is derived from the coefficients of the compounds in a balanced equation.
The mole ratio is therefore used to convert between quantities of compounds in a chemical reaction.
The mole ratio of HNO₃ and H₂O is 6 : 2
Hence, 16.9 moles of HNO₃ will produce = 2/6 × 5.8 = 1.93 moles of H₂O
Also,
Mass = Moles × M.Mass
Mass = 1.93 mol × 18.02 g/mol
Mass = 34.83 g H₂O
= 35 g (Rounded to the nearest tenth)
Learn more about mole ratio here ;
https://brainly.com/question/14425689
#SPJ1
What are the conditions needed for reaction to happen in aldehydes and ketones?
Please help thank you
Explanation:
You may not realise it, but you come across aldehydes and ketones many times a day. Take cakes and biscuits, for example. Their golden, caramelised crust is formed thanks to the Mailliard reaction. This is a process that occurs at temperatures above 140° C, when sugars with the carbonyl group in foods react with nucleophilic amino acids to create new and complex flavours and aromas.
Another example is formaldehyde. Correctly known as methanal, it is the most common aldehyde in industry. It has multiple uses, such as in tanning and embalming, or as a fungicide. However, we can also react it with different molecules to make a variety of more useful compounds. These include polymers, adhesives and precursors to explosives. But how do aldehydes and ketones react, and why?You should remember from Aldehydes and Ketones that they both contain the carbonyl functional group , . This is a carbon atom joined to an oxygen atom by a double bond. Let's take a closer look at it.
If we compare the electronegativities of carbon and oxygen, we can see that oxygen is a lot more electronegative than carbon.
If you keep a gas's temperature constant, how would you increase the volume of the gas?
a. You would change the temperature
b. You would increase the pressure
c. You would decrease the temperature
d. You would decrease the pressure
Answer: d. You would decrease the pressure
Explanation:
If the temperature of a gas is held constant, the pressure and volume vary inversely.
If the gas's temperature remains constant, then increase the volume of the gas with a decrease in the pressure. Therefore, option (D) is correct.
What is Boyle's law?Boyle’s law can be described as at a constant temperature, the pressure exerted by a given mass of gas being inversely proportional to the volume occupied by the gas.
The pressure and volume of a gas at a particular temperature have an inverse relationship.
P ∝ 1/V
or P₁ .V₁ = P₂. V₂ ................ (1)
Where the initial and final pressure of the gas is P₁ and P₂ respectively. The initial and final volume of the gas is V₁ and V₂ respectively at temperature 'T'.
Therefore, if we keep the temperature of the gas constant. them the volume of the gas will increase only if we decrease the pressure of the gas.
Learn more about Boyle's law, here:
brainly.com/question/1437490
#SPJ2
3. Which nuclear radiation is similar to high energy X-rays?
beta
alpha
gamma
neutron
Answer: Gamma radiation
Explanation:
Gamma rays have high penetrating power, similar to high-energy X-rays.
what is the empirical formula for a compound if a sample contains 1.0 g of S and 1.5 g of O?
1.SO
2.SO3
3.S202
4. S203
