The beta decay equation for the transmutation of a radioactive isotope of Rutherfordium has been explained above will be,[tex]\rm Re_{104}^{287} + \beta_0^{-1} \rightarrow Re_{104}^{286}[/tex]
What is the rate of decay?The reduction in the number of radionuclides per unit time is the rate of decay.
The beta decay equation for the transmutation of a radioactive isotope of Rutherfordium has 104 protons and 183 neutrons.
Atomic weight = 104+183 = 287
Atomic number = 104
The beta decay equation is;
[tex]\rm Re_{104}^{287} + \beta_0^{-1} \rightarrow Re_{104}^{286}[/tex]
Hence the beta decay equation for the transmutation of a radioactive isotope of Rutherfordium has been explained above.
To learn more about the rate of decay refer to the link;
https://brainly.com/question/14486631
#SPJ1
Explain why it is more difficult to balance a nail on its tip than on its base.
note:please dont answer according to presuure concepts,answer according to equilibrium concepts.thanks.
It is much easier to balance a thing that has a large base of support and a low center of gravity. The object won't topple over as a result of little center of gravity wobble because of the wide base and low center of gravity. Therefore, balancing a nail on its base as opposed to its tip would be simpler.
Kinetic energy of a body is increased by by 300% what is percentage increased in momentum
Answer
100% - double
200% - triple
300% - 4X
For a 300% increase the KE must be 4 time as large
KE2 / KE1 = M V2^2 / M V1^2 = (V1 / V2)^2 = 4
So V2 = 2 V1 for the requested increase
M V2 / M V1 = V2 / V1 = 2
So the momentum would double for a 100% increase
A car initially traveling at 15.0 m/s accelerates at a constant rate of 4.50 m/s2 over a distance of 45.0 m. how long does it take the car to cover this distance? (4 points)
A car initially traveling at 15.0 m/s accelerates at a constant rate of 4.50 m/s2 over a distance of 45.0 m, the time taken to cover this distance is mathematically given as
t = 2.24 s
What is the time taken to cover this distance?Generally, the equation for Kinematic relation is mathematically given as
S = ut + (1/2)at^2
Therefore
45 = 15t + 2.25 t^2
2.25 t^2 + 15 t -45 = 0
t = 2.24 s
In conclusion, the time is taken to cover this distance
t = 2.24 s
Read more about Time
https://brainly.com/question/4931057
#SPJ1
Friction is a ____________ force
a. Artificial
b. Natural
c. Pessimistic
d. Negative
Answer:
natural is the answer
Friction is a natural force which exist
When you rub neutral objects
Answer:
Your answer is right
a standby generator is connected to 1540 w lamps and a musicians 600w amplifying system how much energy is used if the generator is used for 6 hours
Answer:2140 watts x 6 hours =12.84 kWh. Are you looking for specific type units such as Jules?
When water vapor (a gas) starts to cool, it can
become a liquid. What causes this change in the
state of matter in water?
Answer:
This process is CONDENSATION
Explanation:
Condensation occurs when water vapour loses some of its kinetic energy to a colder body and changes into liquid state.
What is the degree measure of angle bac? round to the nearest whole degree. 19° 20° 70° 71°
The degree measure of angle ∠ bac will be 70°. Option C is correct.
What exactly is an angle?The angle is the distance between the intersecting lines or surfaces. In addition, the angle is expressed in degrees. The angle is 360 degrees for a full revolution.
Given expression;
[tex]\rm cos^{-1}(\frac{3.4}{10})=x \\\\ x = cos^{-1}(0.34) \\\\ x = 70.12^0[/tex]
The degree measure of angle ∠bac will be 70°.
Hence option C is correct.
To learn more about the angle, refer to
https://brainly.com/question/15767203.
#SPJ1
Answer:
70 Degrees
Explanation:
Geometry B E2020!! :3
A practical machine cannot be 100% efficient?
please give me the answer.
[tex]\huge\color{Basic}{\boxed{\tt{answer}}}[/tex]
A practical machine cannot be 100% efficient? IF THE CHOICES ARE TRUE OR FALSE THEN U GOThe answer is false a machine cannot be 100 percent efficient because the output of a machine is always less than input. (correct me if I’m wrong)Have a great day<3Answer: yes it cannot be 100% efficient
Explanation:
only an ideal machine with 0 friction can have 100 percent efficiency
A flywheel is rotating at 30 rev/s. What is the total angle, in radians, through which a point on the flywheel rotates in 40 s?
The total angle, in radians, through which a point on the flywheel rotates is 7540 radians
Angular motionFrom the question, we are to determine the total angle in radians
Using the formula,
[tex]\omega = \frac{\theta}{t}[/tex]
Where [tex]\omega[/tex] is the angular velocity
[tex]\theta[/tex] is the angle
and t is the time
From the given information,
[tex]\omega = 30 \ rev/s[/tex]
Convert to rad/s
[tex]\omega = 30 \times 2\pi \ rad/s[/tex]
[tex]\omega = 188.496 \ rad/s[/tex]
and t = 40 s
From the formula
[tex]\omega = \frac{\theta}{t}[/tex]
[tex]\theta = \omega t[/tex]
∴ [tex]\theta = 188.496 \times 40[/tex]
θ = 7539.822 rad
θ ≅ 7540 rad
Hence, the total angle, in radians, through which a point on the flywheel rotates is 7540 radians
Learn more on Angular motion here: https://brainly.com/question/13915983
#SPJ12
Which processes occur during the second stage of technological design? Check all that apply.
designing a solution
studying relevant information
rebuilding and retesting
reporting a solution
defining criteria of success
identifying a problem
building a prototype
Answer:
designing a solution
Explanation:
after knowing & identifying a problem we start putting a solution
A 10-cm long pencil is placed upright 50 cm from a concave mirror with focal length 0.50 m. What will be
the characteristics of any image that is formed?
A virtual and erect image is formed by concave mirror.
What is focal length?The focal length of the mirror is the distance between the lens and the image sensor.
It is also defined as the distance from a lens or mirror to the focal point.
It is also stated by the formula
[tex]\frac{1}{y} +\frac{1}{u} = \frac{1}{f}[/tex]
u = -50 cm and f = 0.50 m (50cm)
[tex]\frac{1}{v} +\frac{1}{-50} =\frac{1}{50}[/tex]
v= -50 cm
where - sign shows that image is virtual.
Magnification m= [tex]\frac{v}{u}[/tex]
m = -50/50
m = 0
hence, virtual and erect image will be formed.
For more Focal length question visit
https://brainly.com/question/16188698
#SPJ1
A solenoid is configured to produce a magnetic field of 0.027T at its center. it has radius 1.4 cm and length 40cm and the wire can carry a maximum length of 12.0A. What is the total length required
The total length of the wire required is 63 m.
What is current?The current is the stream of charges which flow inside the conductors when connected across the end of voltage.
Given is a solenoid is configured to produce a magnetic field of 0.027T at its center. it has radius 1.4 cm and length 40cm and the wire can carry a maximum current of 12.0 A.
Radius, r = 1.4cm = 0.014 m
Length l = 40 cm = 0.4 m
If the current is I, then the magnetic field in solenoid is given by
B = μ₀ n I
By substituting the values, we get
0.027 = 4π x 10⁻⁷ x n x 0.4
n = 1792 turns/unit length
Total length of wire = circumference x Turns
L = 2πr x N
where N = nl
Plug the values, we get
L = 2π x 0.014 x1792 x 0.4
L = 63 m
Thus, the total length of the wire is 63 m.
Learn more about current.
brainly.com/question/10677063
#SPJ1
A plane is coming in to taxi at an airport. It lands parallel to the surface at 480m/s and takes exactly one minute to come to a complete stop. What is its acceleration?
The acceleration of the plane will be −8 m/s²
How to find the acceleration of a plane?
Acceleration is the rate of change in velocity over time (Δv/t).
Given, that the initial velocity of the plane u=480 m/s
The final velocity of the plane is zero after landing, v= 0 m/s
t= 1 minute= 60 seconds
we know, v=u + at
0= 480 + 60a
a=[tex]\frac{-480}{60}[/tex] = -8m/s²
Thus, the acceleration of the plane is -8 m/s²
(negative acceleration implies that the object is slowing down)
To learn more about acceleration refer to:
https://brainly.com/question/460763
#SPJ10
and electric motor lifts an elevator a vertical distance of 18.0m in a time of 30.0s by exerting an upward force of 6.0x10^3 N . what power does the electric motor produce?
Answer:
[tex]\fbox {3.6kW}[/tex]
Explanation:
Formula used :
[tex]\boxed {P = F \times v} \leftarrow \rightarrow \boxed {P = \frac{F \times S}{t}}[/tex]
Given :
⇒ F = 6 × 10³ N
⇒ S = 18 m
⇒ t = 30 s
Solving :
⇒ P = 6 × 10³ × 18 / 30
⇒ P = 2 × 100 × 18
⇒ P = 3600 W
⇒ P = 3.6kW
2. A kg of iron and a kilo of lead, both at 1000 degrees Celsius, are kept on ice. It is discovered after some time that the iron has melted more ice than the lead. Why? 2 A vonal containing un or in kont in on oron The tomis motor an hoot
The specific heat capacity of iron is greater than that of lead hence the iron will melt the ice more than the lead.
What is the specific heat capacity?
The specific heat capacity refers to the amount of heat that is required to raise the temperature of 1Kg of a body by 1 K.
We know that the specific heat capacity of iron is greater than that of lead hence the iron will melt the ice more than the lead.
Learn more about heat capacity:https://brainly.com/question/13499849
#SPJ1
What do velocity, acceleration, force, and displacement, have in common?
Velocity, acceleration, force, and displacement, have magnitude and direction (ie vector quantity) in common
What is a vector quantity?This is a which have both magnitude and direction. Example include:
VelocityDisplacement ForceAccelerationMomentWeightWhat is a scalar quantity?This is a quantity which has magnitude but no direction. Example include:
WorkEnergySpeedMassTimeDistanceFrom the above, we can see that velocity, acceleration, force, and displacement, have magnitude and direction (ie vector quantity) in common
Learn more about scalar and vector quantity:
https://brainly.com/question/774036
#SPJ12
which best describes series
Answer:
a single closed path of electrical components including a voltage source
The main source of information used by astronomers to learn about objects in space is.
A 9.0x10^-2kg ice cube at 0.0 degrees Celsius is dropped into a styrofoam cup holding 0.35 kg of water at 13 degrees Celsius.
A. Find the final temperature of the system. Assume the cup and the surroundings can be ignored.
B. Find the amount of ice (if any) remaining.
C. Find the initial temperature of the water that would be enough to just barely melt all of the ice.
A. The final temperature of the system is 0°C.
B. The amount of ice (if any) remaining is 0.0331 g
C. The initial temperature of the water that would be enough to just barely melt all of the ice is 20.57 °C.
What is specific heat?The specific heat is the amount of heat required to change the temperature by 1°C. It is denoted by C.
Heat lost or gained is represented as
Q = m C ΔT
Given, Mass of ice, mice = 9x10⁻² kg, Mass of water, mw =0.35 kg, T = 13 °C
A. If ice is in excess, final water temperature will be 0°C.
B. Specific heat of water Cp = 1000 cal/kg°C
Latent heat of ice L = 80 kcal/kg
In that case, heat lost by water =Heat gain by ice
Q = mCp x dT = mL
0.35 x 1000 x 13 = m x 80 x 1000
m = 0.0569 kg of ice.
The gram of ice remaining = 0.09 - 0.0569
= 0.0331 gram of ice.
Thus, the amount of ice remaining is 0.0331 g
C. Heat required to melt 90 gram of ice, Q mL
Q = 90 x 80 = 7200 cal.
If the initial temperature of water needed = T,
mCp x dT = mL
350 x T = 7200
T = 20.57 °C
Thus, the initial temperature of the water that would be enough to just barely melt all of the ice is 20.57 °C.
Learn more about specific heat.
https://brainly.com/question/11297584
#SPJ1
How much thermal energy does it take to raise the temperature of 4.5kg of water for 12C to 97C the specific heat of water is 1.68kj
Answer:
The amount of thermal energy needed is 626.6 J
Explanation:
When a certain amount of heat energy Q is supplied to a substance, the temperature of the substance increases according to the equation
where m is the mass of the substance is the specific heat capacity of the substance is the change in temperature
Answer:
642.6 kJ
Explanation:
Using the formula for heat energy required:
[tex]Q = mc \Delta T[/tex] ,
where:
C → specific heat capacity = 1.68 kJ/kg°C
Q → heat energy required = ?
m → mass of the object = 4.5 kg
ΔT → change in temperature = 97°C - 12°C = 85°C,
Q = 4.5 x 1.68 x 85
= 642.6 kJ
Drag the tiles to the correct boxes to complete the pairs. Match the chemical reactions with their properties. Drag the tiles to the correct boxes to complete the pairs . Match the chemical reactions with their properties .
Chemical reactions produces new substances and may be a synthesis, decomposition, combustion, replacement, or neutralization reaction.
What are chemical reactions?
Chemical reactions are changes which occurs in substances producing changes in the chemical properties of the substance.
The chemical reactions described are as follows:
Synthesis: at least two reactants and one productDecomposition: at least one reactant and two productsCombustion: oxygen is one of the reactants and large amount of energy is releasedReplacement: at least one or more atoms replaces a part of a compoundNeutralization: the products are always salt and waterLearn more about chemical reactions at: https://brainly.com/question/11231920
#SPJ1
Please Answer this question! I would be very grateful!
Answer:
friction
Explanation:
i believe that is the answer
Answer:
Option C - Friction
Explanation:
Inertia would be an invalid option as it is not changing state.
Gravity would be invalid option as it will stay on the ground constantly.
Friction would be a valid option as the friction between the bottom part of the furniture and the floor are being rubbed together .
Air resistance is valid but will not be as strong as the friction
Therefore Option C - Friction will be the primary force that the person has to work against to keep this piece moving .
Hope this helped and have a good day
Which of the following situations would cause the greatest decrease in the motion of molecules in a system
Answer:
Actually, the correct answer is D. The system releases 75 J of heat, and its volume doubles.
Explanation:
I took this computer-scored test, and while I was stuck on this answer for a while, I was able to get 100%. This was my thought process:
We know that molecular motion increases with an increase in temperature, because collisions increase. For that reason, for molecular motion to decrease in a system, as the question states, the system must RELEASE heat and decrease in temperature. Additionally, when a system's volume is smaller, its molecular motion increases. This is because the molecules hit the container more easily and more often. If the volume is halved then, the molecules would have MORE motion, which we aren't looking for in this question! Therefore, the volume must DOUBLE so that less molecular motion takes place. The answer is D! :)
If we assume a typical efficiency for the body, as quoted in the video, how much energy input would it take to climb a ladder, increasing your body’s potential energy by 5,000 j?.
The energy input would it take to climb a ladder will be 20000 J.
What is the mechanical advantage?Mechanical advantage is a measure of the ratio of output force to input force in a system, it is used to obtain the efficiency of the given mechanical machine.
Mechanical advantage is a measure of how much a machine multiplies the input force.
The complete question is;
"if we assume a typical efficiency of 25% for the human body how much energy input would it take to climb a ladder increasing body potential energy by 5000J"
The formula for the efficiency is;
[tex]\rm E = \frac{P}{\eta} \\\\ E = \frac{5000}{0.25} \\\\ E = 20000 \ J[/tex]
Hence, the energy input would it take to climb a ladder will be 20000 J.
To learn more about the mechanical advantage, refer to the link;
https://brainly.com/question/7638820
#SPJ1
Calculate the change in time for each quarter of the
The change
in time for the first quarter is
v
track. Record the change in time in Table C of your
seconds.
Student Guide.
The change in time for the second quarter is
seconds.
The change in time for the third quarter is
seconds.
The change in time for the fourth quarter is
seconds.
Answer:
The change in time for the first quarter is seconds. = 2.07
The change in time for the second quarter is seconds.
=1.09
The change in time for the third quarter is seconds.
=0.95
The change in time for the fourth quarter is seconds.=0.81
Explanation:
Hope this helped.
What would be the effect of adding a proton to a nucleus?
A. It would increase the strong nuclear force and increase the
electrostatic force.
B. It would decrease the strong nuclear force and decrease the
electrostatic force.
C. It would increase the strong nuclear force and decrease the
electrostatic force.
D. It would decrease the strong nuclear force and increase the
electrostatic force.
Answer:
A
Explanation:
The electrostatic force and strong nuclear force are opposite forces. The electrostatic force causes the repulsion beteween the positively charged protons in the nucleus but the strong force keeps the nucleus glued together but overcoming the electrostatic force. They would both increase upon the addition of a proton or radioactivity will result.
what is momentum help ASAP
Momentum is the rate of increase in speed or decrease in speed after application of force
The formula is given by
p=mvp is momentum
m is mass
v is velocity
A spring with a force constant of 3x10^3 Nm-1 is used to measure the mass of an object. If the spring extends by 5cm when the object is hung from it, the mass of the object is
Answer:
15.29 kg
Explanation:
F = k * d 5cm = .05 m
= 3 x 10^3 n/m * .05 m = 150 N
= 150 kg -m / s^2
150 kg- m / s^2 / 9.81 m/s^2 =15.29kg
Explain an example of an object moving in projectile motion.
An example of an object moving in projectile motion is; A basketball being thrown into a net.
What is an example of a Projectile Motion?Projectile motion is the motion of an object thrown or projected into the air, subject to only the acceleration of gravity.
Now, an example of an object moving in a projectile motion is throwing a basketball into a basketball net in a game. This is because the ball is thrown into the air at an angle towards the net and as such is subject to only acceleration of gravity.
Read more about Projectile Motion at; https://brainly.com/question/24216590
#SPJ12
