Today was a difficult day. The sun's rays seemed to beat down on us like never before - the heat was unbearable.
What do you mean by the ozone layer?
The ozone layer is a region of Earth’s atmosphere located in the stratosphere, between 10 and 30 km above Earth’s surface. It is composed of ozone molecules, which are made up of three oxygen atoms (O3). The ozone layer acts as a shield, blocking most of the ultraviolet radiation from the sun. This helps protect life on Earth from the harmful effects of UV radiation.
I can only imagine what life would be like without the ozone layer. Without the ozone layer protecting us, we are exposed to the damaging rays of the sun, including UV radiation.
The air quality is also much worse. With the ozone layer gone, there would be a huge increase in the amount of pollution in the air, leading to much more severe health issues for people than we currently experience.
It's also getting harder and harder to grow food. With the depletion of the ozone layer, crops are being destroyed by the intense heat, leaving us with much less food than we used to have.
It's a struggle to get through each day without the ozone layer. I miss the days when I could go outside and be comfortable, rather than feeling like I'm suffocating from the heat.
It's so hard to see the world suffer from the lack of an ozone layer. I can only hope that something is done soon to save us from this reality.
To know more about the ozone layer,
https://brainly.com/question/833767
#SPJ1
Why do ionic compounds need to reach stability in their charges?
Answer:
Ionic compounds need to reach stability in their charges because they are composed of ions, which are atoms or molecules that have gained or lost electrons. The positive and negative charges within an ionic compound must balance out in order to achieve stability. If the charges are not balanced, the compound will be unstable and will tend to react with other ions or molecules in an attempt to reach a state of stability. This is why ionic compounds form crystal lattices, with each ion arranged in a specific position in the lattice so that the positive and negative charges are evenly balanced.
Explanation:
Tell me if you still confuse
ALLEN
If a 3.0g sample of ground water contains 1.1 x 10^-5g of arsenic(As), what is the concentration of As in ppm?
The concentration of arsenic in the groundwater sample is 36.67 ppm.
What is arsenic?Arsenic is a chemical element with the symbol As and atomic number 33. It is a metalloid, meaning it has properties of both metals and nonmetals. Arsenic is commonly found in the earth's crust and is present in various minerals and rocks.
The concentration of arsenic in the groundwater sample can be expressed in parts per million (ppm) as follows:
ppm = (mass of arsenic/mass of water sample) x[tex]10^6[/tex]
The mass of the water sample is 3.0g, so the mass of arsenic is 1.1 x [tex]10^-5g.[/tex]
ppm =[tex](1.1 x 10^-5g / 3.0g) x 10^6[/tex]
ppm [tex]= (0.00011 / 3) x 10^6[/tex]
ppm = 36.67
Therefore, the concentration of arsenic in the groundwater sample is 36.67 ppm.
To learn more about arsenic visit:
brainly.com/question/13874165
#SPJ1
if an excess of reducing agent is added, how many moles of diphenylmethanol can be produced from one mole of benzophenone?
Only, one mole of diphenylmethanol can be produced from one mole of benzophenone.
The reaction of benzophenone with a reducing agent (such as sodium borohydride) can produce diphenylmethanol according to the following balanced chemical equation:
C₁₃H₁₀O + 2NaBH₄ + 2H₂O → C₁₃H₁₄O + 2NaBO₂ + 4H₂
From the balanced equation, we can see that one mole of benzophenone (C₁₃H₁₀O) reacts with two moles of NaBH₄ and two moles of water to produce one mole of diphenylmethanol (C₁₃H₁₄O) and two moles of NaBO₂ and four moles of hydrogen gas (H₂).
If an excess of reducing agent is added, it means that there is more than enough NaBH₄ to react with all of the benzophenone present. In this case, the limiting reagent is benzophenone, and the amount of diphenylmethanol that can be produced is determined by the amount of benzophenone available.
Therefore, from one mole of benzophenone, we can produce one mole of diphenylmethanol when an excess of reducing agent is added.
To know more about benzophenone here
https://brainly.com/question/17566761
#SPJ4
Transcribed image text: A pipet is used to measure out 10 mL of water. If the mass of this volume of water is 9.990 g and the density of water is given as 0.9978 g/mL, what is the actual volume of water measured out? O 10.000 mL 9.990 mL O The actual volume measured out is impossible to tell 10.012 mL
10.012 mL is the actual volume of water measured out.
We can use the given information to determine the actual volume of water measured out using the formula:
The density of water is equal to the Mass of water divided by the Volume of water.
Rearranging this formula, we get:
Volume = Mass / Density
As per the given information,
Mass of water = 9.990 mL
Density of water = 0.9978 g/mL
Volume = 9.990 g / 0.9978 g/mL
Volume = 10.012 mL (rounded to three significant figures)
One milliliter of water has a volume of 1 cubic centimeter.
Therefore, the actual volume of water measured out is 10.012 mL. The closest option given in the transcribed image is 10.012 mL.
For similar questions on the volume of water,
https://brainly.com/question/30619544
#SPJ4
A student measures the mass of a solution before and after a chemical reaction takes place. in both cases the students measures the mass to be 50.25 g on an electronic balance with an uncertainty of 0.05 g. the student realizes that the ranges of uncertainty for each measurement overlap exactly. which claim can the student make?
The student can claim that the mass of the solution before and after the chemical reaction is the same.
This can be supported by the fact that the ranges of uncertainty for each measurement overlap exactly, indicating that the mass of the solution was the same before and after the reaction. This is because the ranges of uncertainty for the two measurements overlap exactly, meaning that the two values are statistically indistinguishable. Mathematically, this means that the absolute difference between the two measurements
[tex](50.25 g - 50.25 g)[/tex] is within the combined uncertainty of the two measurements[tex](0.05 g + 0.05 g).[/tex]
Therefore, the student can conclude that the mass of the solution has not changed.
learn more about mass Refer:brainly.com/question/15959704
#SPJ4
in a trial, a .300 m solution of no had a new molarity of 0.156 after 500 seconds. what is the rate of formation of n2 (in mol/l*s)?
In a trial, a 0.300 m solution of N[tex]_2[/tex] had a new molarity of 0.156 after 500 seconds. Therefore, 0.0003mol /l× s is the rate of formation of N[tex]_2[/tex].
What is rate of reaction?The reaction rate or rate of reaction is the rate at which a chemical reaction occurs, defined as proportional to the rise in product concentration per unit time and the reduction in reactant concentration per unit time.
The speeds of reaction might vary greatly.
rate of formation of N[tex]_2[/tex] = change in concentration/ change in time
=0 .300 - 0.156 /0- 500
=0.15/500
=0.0003mol /l× s
Therefore, 0.0003mol /l× s is the rate of formation of N[tex]_2[/tex].
To learn more about rate of reaction, here:
https://brainly.com/question/8592296
#SPJ1
suppose a student starts with 2.3621 g of a sand mixture and separates the components into 1.3012 g of n a c l , 0.5560 g of s i o 2 , and 0.4503 g of c a c o 3 . based on the amount of recovered s i o 2 , what is the percent of s i o 2 in the starting mixture?
Starting with 2.3621 g of sand, a student divides the mixture into 1.3012 g of naCL, 0.5560 g of siO2, and 0.4503 g of cAcO3. The quantity of recoverable sio 2 So the beginning combination had 21.2066% of silicon dioxide in it.
A residue weighing 1.46g is produced after heating a 1.5 g mixture of SiO2 and Fe2O3 to a high temperature. 3Fe2O32Fe3O4+21O2 is the reaction that causes weight loss. Two double bonds join the two oxygen atoms to the silicon, giving SiO2 its linear structure. On the Si, there aren't any lone pairings. This would represent an instance of sp hybridization. SiO2 is tetrahedral when it is a polymer. SiO2 insulation layers are frequently applied using plasma-enhanced chemical vapor deposition (PECVD), but this method normally needs a relatively high deposition temperature of about 300 C.
Learn more about sand here:
https://brainly.com/question/8165420
#SPJ4
a compound with a molar mass of about 42 g/mol contains 85.7% carbon and 14.3% hydrogen by mass. what are the empirical and molecular formulas for this compound?
A substance that is only made up of carbon and hydrogen has a mass composition of 85.7% c and 14.3% h. The compound's empirical formula is CH₂.
An empirical formula is a chemical formula for a compound that only specifies the proportions of the components present rather than the exact number of atoms.
The empirical formula for molecules is the most straightforward iteration of the molecular formula. To find this, divide each subscript in the formula by its lowest common denominator.
Atomic mass number % is the easiest formula to use to calculate an element's percentage in relation to the number of atoms.
With a density of 85.7 and an atomic mass of 12, carbon has a mass number of 7.141.
Hydrogen has a mass of 14.3 and
an atomic mass of 1 = 14.3 / 1 = 14.3²
As a result, the compound's empirical formula is C₁H₂= CH₂.
Learn more about Empirical formula here
https://brainly.com/question/7989775
#SPJ4
2 KCIO3 = 2 KCI + 3 O2
If 12.0 grams of potassium chlorate decompose, how many grams of potassium chloride will be
produced? Round your answer to the nearest hundredths.
Answer:
7.30g Potassium Chloride (KCl)
Explanation:
You are given 12.0 grams of KClO3, so start with that!
12g KClO3[tex]\frac{12g KClO3}{ } \frac{1 mol KClO3}{122.55g} \frac{2 mol KCl}{2 mol KClO3} \frac{74.55g KCl}{1 mol KCl} = 7.299877601[/tex]≈7.30
the electron configruration of an atom in the ground state is 2-4 the total number if occupied principal energey levels im this atom is
Answer:
2 energy levels
Explanation:
Is the disaccharide made from a glucose linked to a fructose?
Sucrose is the carbohydrates that disaccharide made from a glucose which is linked to a glucose named fructose.
Carbohydrates are one of the macro minerals, along with protein and fat, that give the energy necessary for the body to perform all it's diurnal functions. There are two general types of carbohydrates called simple carbohydrates and complex carbohydrates.
Simple carbohydrates are broken down by the body veritably snappily into glucose for energy, and complex carbohydrates have longer chains of glucose motes and thus take longer to digest.
Polysaccharide comes from word “ poly ” which means numerous. Polysaccharides formed of long chains or numerous motes of monosaccharides. It includes bounce, cellulose, glycogen.Two motes of a simple sugar that are linked each other form a disaccharide. One of the most common disaccharides is sucrose( known as table sugar), which is composed of one glucose and one fructose patch. Maltose is composed of two glucose motes, while lactose( milk sugar) is synthesized by glucose and galactose.Monosaccharides or simplest sugar is a structure blocks of carbohydrates. They're glucose, galactose and fructose.Learn more about Types of carbohydrates:
https://brainly.com/question/30624787
#SPJ4
The giant crushers lifted the boulders and quickly _________ them into a uniform gray powder.
The giant crusher lifted the boulders and quickly pulverized them into a uniform gray powder.
Pulverization is defined as the process of applying an external force to a solid material of a certain size to destroy it and reduce it into pieces that are smaller than the original size. It has long been done for many materials including ore, glass, ceramics, grains, paints and medicines. The purpose of pulverization are for the pretreatment for separation of active ingredients, production of powder with particle size suitable for the purpose, surface modification of particles, formation of particles composites and the pretreatment of material synthesis. It is being used not only for reducing particle size but also as an operation for developing new materials.
To learn more about Pulverization please visit:
https://brainly.com/question/28964957
#SPJ4
Matter is anything that has mass and………
O energy
O volume
O gravity
O plasma
butyl alcohol, c4h10o, is highly flammable. when the reaction for the combustion of butyl alcohol is properly balanced, what is the coefficient in front of o2?
When reaction for the combustion of butyl alcohol is properly balanced the coefficient in front of oxygen is 6.
Butyl alcohol is a hydrocarbon containing the which group as its primary group.
When butyl alcohol reacts with oxygen it gives carbon dioxide and water as a result the balanced chemical reaction equation for the combustion of butyl alcohol is given as,
C₄H₉OH + 6O₂ → 4CO₂ + 5H₂O
As we can see from the above stated chemical equation the efficient of butanol or butyl alcohol is 1, the coefficient of oxygen is 6, the coefficient of carbon dioxide is 4 and the coefficient of water is 5.
So, the answer to our question is 6.
To know more about hydrocarbons, visit,
https://brainly.com/question/3551546
#SPJ4
convert 24g of NaCk to formula units
Answer:
Explanation:
In the case of NaCl
Formula units, also known as formula mass, are the simplest repeating unit in a chemical compound. For a salt like sodium chloride (NaCl), one formula unit would be one Na+ ion and one Cl- ion.
For sodium chloride, the formula mass is the sum of the atomic masses of the individual atoms in the formula unit, which is approximately 58.44 g/mol.
In the case of NaCl, 24 g would be equivalent to approximately 0.41 moles. Since one formula unit of NaCl weighs 58.44 g, then 0.41 moles of NaCl would be equal to approximately 0.41 moles * 6.022 x 10^23 formula units = 2.47 x 10^23 formula units.
Therefore, 24 g of NaCl would be equal to approximately 2.47 x 10^23 formula units.
What is the temp range of Hanna pH temp probe?
The temp range of Hanna pH temp probe lies between -5.0 to 105.0°C.
According to the new definition of temperature, according to the General Conference on Weights and Measures, is: "The kelvin, symbol K, is the SI unit of thermodynamic temperature and its magnitude is set by fixing the numerical value of the Boltzmann constant to be equal to exactly 1.380649 × 10-23... J K-1 [joules per kelvin].
Hence, the temperature range of Hanna pH temp probe lies between 5.0 to 105.0°C. Simultaneous pH and temperature measurements is done in a large dual-line LCD display. Automatic pH calibration at one or two points within two memorized buffer sets (standard or NIST) is selectable temperature unit (°C).
Learn more about temperature from the link given below.
https://brainly.com/question/14455512
#SPJ4
which of the following correctly describes the reaction? responses the decomposition of n2o5 is a zero-order reaction. the decomposition of n 2 o 5 is a zero-order reaction. the decomposition of n2o5 is a first-order reaction. the decomposition of n 2 o 5 is a first-order reaction. the decomposition of n2o5 is a second-order reaction. the decomposition of n 2 o 5 is a second-order reaction. the overall reaction order is 3.
The decomposition of N2O5 is a first-order reaction. First-order reaction is an accurate description of the N2O5 decomposition process.
The rate of a first-order reaction is one in which the concentration of a single reactant raised to the power of one determines the rate of the reaction. It is discovered that the rate of N2O5 breakdown is exactly related to the concentration of N2O5. A second-order reaction is one in which the rate of the reaction is proportional to the concentration of the reactant raised to the power of two, as opposed to a zero-order reaction in which the rate of the reaction is independent of the reactant concentration.
The orders of each reactant in the rate equation are added to get the overall reaction order, which in this case would be one (first-order).
learn more about reaction here:
https://brainly.com/question/28984750
#SPJ4
true or false. all liquid and precipitate waste will be placed in a glass bottle waste container in the fume hood. however, cu and mg waste will be placed in the solid waste container.
The statement "all liquid and precipitate waste will be placed in a glass bottle waste container in the fume hood. However, Cu and Mg waste will be placed in the solid waste container" is generally true and reflects standard practices in laboratory waste disposal.
In the laboratory, it is important to properly dispose of any waste generated during experiments in order to minimize environmental impact and ensure safety. Liquid and precipitate waste is typically collected in glass bottles, which are more suitable for containing such materials and can be more easily recycled. Glass is also more chemically resistant and less likely to react with the waste materials compared to plastic containers. Furthermore, waste containers should be placed in the fume hood to prevent exposure to any harmful fumes and to minimize any risk of explosion or fire.
On the other hand, solid waste containers are typically used for the disposal of any solid waste materials generated during experiments, such as Cu and Mg waste. Copper (Cu) and magnesium (Mg) are metals that are often used in laboratory experiments and can produce solid waste materials. These solid waste materials can be safely disposed of in a solid waste container, which can be emptied and disposed of as general waste.
It is important to note that laboratory waste disposal practices may vary depending on the specific institution or laboratory. Some laboratories may have their own specific guidelines for waste disposal that should be followed. Additionally, some materials may require special handling or disposal procedures, such as hazardous or radioactive waste. In such cases, additional precautions may be necessary to ensure proper disposal and minimize potential risks to health and the environment.
In conclusion, proper disposal of laboratory waste is essential to maintain a safe and sustainable working environment. Collecting liquid and precipitate waste in glass bottles in the fume hood and solid waste in a designated container, such as Cu and Mg waste, are standard practices in laboratory waste disposal. Laboratories should establish clear guidelines for waste disposal and ensure that all personnel are trained and follow proper waste disposal procedures to ensure safety and environmental responsibility.
To know more about precipitate: https://brainly.com/question/18109776
#SPJ4
Select the term that correctly describes a chemical reaction that favors one possible structural isomer over one or more other structural isomers.
A. Stereogeneic
B. Stereoselective
C. Regioselective
D. Regiogenic
A chemical reaction that prefers one potential structural isomer over one or more other structural isomers is accurately referred to as stereoselective.
One stereoisomer from a variety of stereoisomers interacts in a stereoselective reaction. Additionally, a reaction that, although it has the potential to yield two or more stereoisomers, only ever yields one stereoisomer.
The overall reaction is referred to as stereoselective if more than one reaction between a group of reactants may take place under the same circumstances, producing products that are stereoisomers, and if one product forms in larger proportions than the others.
Occasionally, the phrase "stereospecific" is used to denote "100% stereoselective" (cf. regiospecific). It is advised to avoid using the phrase stereospecific to signify 100% stereoselective because the term's original definition is different.
Learn more about Stereoselective here:
https://brainly.com/question/14610139
#SPJ4
What is the longest exothermic reaction?
Answer:intermetallic and thermite reactions.
Explanation:
.
an employment situation that pays bills but os largley unfluffing is?
Observation when separating iron filings, sand and salt
What is the atom number for He
Answer:
2
Explanation:
Answer:
2
Explanation:
Are you the significance of the value that comes from economic uses of forests, including at least two examples of the different types of economic, foresee us, and explain how the forest economic value relates to its ecological value
The economic value of forests is significant because forests provide a wide range of goods and services that are vital to human well-being and the economy. Some examples of the economic uses of forests are:
-Timber and wood products: Forests provide a source of wood for the construction of homes, furniture, and paper products. The forest industry is a major employer in many parts of the world.
-Non-timber forest products: Many forest products have important cultural and economic value, such as wild berries, mushrooms, medicinal plants, and non-timber forest products like resins and latex.
The economic value of forests is closely linked to their ecological value. Forests play a critical role in maintaining ecosystem services that are essential for human well-being, such as carbon sequestration, water purification, soil conservation, and biodiversity conservation. A well-managed forest that is sustainably harvested can maintain its ecological functions while providing economic benefits. In contrast, unsustainable forest practices can result in deforestation, soil degradation, and loss of biodiversity, which can have negative economic and ecological impacts.
In summary, forests are important for both their economic and ecological values. Sustainable forest management practices that balance economic benefits with ecological conservation are essential for ensuring the long-term health and vitality of forests and the ecosystems they support.
Learn more about the economic and ecological values of forests here:
https://brainly.com/question/13313034
#SPJ4
What is the difference between adhesion and cohesion properties?
Cohesion is the force that holds the same substance together, while adhesion is the force that holds different substances together.
Cohesion refers to the force of attraction between the same type of molecules within a substance. It is the bond between molecules of the same substance, such as the hydrogen bonds between water molecules. This property determines the internal strength of a substance and is responsible for the ability of a liquid to maintain its shape and not flow easily. For example, water is said to have high cohesion because its molecules are strongly attracted to each other, giving it its characteristic cohesive behavior.
Adhesion, on the other hand, refers to the force of attraction between two different substances. It is the bond between molecules of different substances, such as the attraction between water and a glass surface. This property determines the ability of a substance to stick to other substances, such as when a droplet of water adheres to a window. For example, gecko lizards can climb smooth surfaces because of the strong adhesion between their feet and the surface.
To learn more about Cohesion :
https://brainly.com/question/29598400
#SPJ4
A 20.0 mL sample of 0.150 M KOH is titrated with 0.125 M HClO4 solution. Calculate the pH after the following volumes of acid have been added.a) 20.0mLb) 21.5mLc) 24.0mLd) 26.5mLe) 29.0 mL
The pH values after the given volumes of acid have been added are: a) 12.18, b) 12.39, c) 11.78, d) 11.25, and e) 10.79.
To solve the problem, we need to use the balanced chemical equation for the reaction between KOH and HClO4:
KOH + HClO4 -> KClO4 + H2O
At the start of the titration, before any HClO4 has been added, we have a solution of KOH with a concentration of 0.150 M. We can use this concentration to calculate the initial concentration of hydroxide ions in the solution:
[OH-] = 0.150 M
a) Before any HClO4 has been added, the volume of the solution is 20.0 mL. At this point, no HClO4 has reacted with the KOH, so the concentration of OH- ions is still 0.150 M. To calculate the pH, we can use the formula for the dissociation constant of water:
Kw = [H+][OH-] = 1.0 x 10^-14
pH = -log[H+]
[H+] = Kw/[OH-] = 6.67 x 10^-13 M
pH = -log(6.67 x 10^-13) = 12.18
b) After 1.5 mL of HClO4 has been added, the volume of the solution is 21.5 mL. The moles of HClO4 added is:
0.125 mol/L x 0.0015 L = 1.875 x 10^-5 mol
The moles of KOH initially in the solution is:
0.150 mol/L x 0.020 L = 0.003 mol
Thus, the moles of KOH remaining after reaction with HClO4 is:
0.003 mol - 1.875 x 10^-5 mol = 0.00298125 mol
The total volume of the solution is 21.5 mL, so the new concentration of KOH is:
0.00298125 mol / 0.0215 L = 0.1387 M
Using this concentration, we can calculate the concentration of OH- ions:[OH-] = 0.1387 M
Using the same formula for Kw and pH as before, we find that:
[H+] = 4.06 x 10^-13 M
pH = -log(4.06 x 10^-13) = 12.39
c) Repeating the above process for a volume of 24.0 mL gives:
[H+] = 1.64 x 10^-12 M
pH = -log(1.64 x 10^-12) = 11.78
d) For a volume of 26.5 mL:
[H+] = 5.67 x 10^-12 M
pH = -log(5.67 x 10^-12) = 11.25
e) For a volume of 29.0 mL:
[H+] = 1.63 x 10^-11 M
pH = -log(1.63 x 10^-11) = 10.79
To learn more about dissociation constant Click here:
brainly.com/question/28197409
#SPJ4
Select all the correct answers.
Some chemical reactions absorb energy rather than release it. Which of these phenomena are caused by chemical reactions that absorb energy?
A) Plants use sunlight and atmospheric gases make food.
B) A person activates a cold pack by hitting it against a surface.
C) A rechargeable battery is plugged in to charge.
D) Heat is used to separate a compound into its elements.
PLEASE BE ACCURATE!! Thank you so much!!:)
Answer:
B) A person activates a cold pack by hitting it against a surface.
C) A rechargeable battery is plugged in to charge.
D) Heat is used to separate a compound into its elements.
Explanation:
Chemical reactions that absorb energy are called endothermic reactions. Endothermic reactions absorb energy in the form of heat, light, or electricity, which causes the temperature of the system to decrease.
A) Plants use sunlight and atmospheric gases to make food through photosynthesis, which is an endothermic reaction that absorbs energy in the form of light.
B) A person activates a cold pack by hitting it against a surface, which triggers an endothermic reaction that absorbs heat from the surroundings, causing the cold pack to become cold.
C) A rechargeable battery is plugged in to charge, which involves an endothermic reaction that absorbs electrical energy, converting it into chemical energy that is stored in the battery.
D) Heat is used to separate a compound into its elements through heating, which is an endothermic reaction that absorbs heat from the surroundings, causing the temperature of the system to decrease.
ALLEN
the free-base form of cocaine has a solubility of 1.00 g in 6.70 ml ethanol (ch3ch2oh) . calculate the molarity of a saturated solution of the free-base form of cocaine in ethanol. express your answer to three significant figures and include the appropriate units.
The molarity of a saturated solution of the free-base form of cocaine in ethanol is 0.49M if it has a solubility of 1.00 g in 6.70 ml ethanol.
Given the mass of free-base form of cocaine = 1g
The volume of ethanol = 6.70mL
Molarity is calculated as moles of solute divided by the volume of solution
We know that Volume of solute + Volume of solvent gives Volume of solution.
Moles of solute cocaine ([tex]C17H21NO4[/tex]) = mass of cocaine/molar mass
moles = 1/303.353 = 0.00330 mol [tex]C17H21NO4[/tex]
Volume of solution = 6.7/1000 = 0.0067 L
Then the molarity = 0.00330/0.0067 = 0.49 mol/L or 0.49 M
To learn more about molarity click here https://brainly.com/question/8732513
#SPJ4
explian why the reactivity of the halogens decreases going down the group
The reactivities of the halogens(17th group) decrease down the group ( At < I < Br < Cl < F). This is due to the fact that atomic radius increases in size with an increase of electronic energy levels. This lessens the attraction for valence electrons of other atoms, decreasing reactivity.
Why does it take a lot of energy for water to boil?
Water has weak bonds inside of the molecule.
Water has strong intermolecular forces (Hydrogen bonding)
Water has weak intermolecular forces (Dispersion forces)
Water has strong bonds inside of the molecule
The reason is because, water has strong intermolecular forces (Hydrogen bonding)
What is Hydrogen bonding?A hydrogen bond is an attraction that is mostly electrostatic between an electronegative atom with a lone pair of electrons and an electronegative atom that is covalently attached to a more electronegative "donor" atom or group.
Intermolecular hydrogen bonding and intramolecular hydrogen bonding are the two main types of hydrogen bonds. Most often, distinct molecules with either the same or different substances form intermolecular hydrogen bonds.
Learn more about Hydrogen bonding here:
https://brainly.com/question/1426421
#SPJ1
