Answer:
Replace /* Your solution goes here */ with the following lines of code
for(i = 0;i<SCORES_SIZE-1;i++)
{
bonusScores[i]+=bonusScores[i+1];
}
Explanation:
The above iteration starts from the index element (element at 0) and stops at the second to the last element (last - 1).
Using an iterative variable, i
It adds the current element (element at i) with the next element; element at i + 1.
The full code becomes
#include<iostream>
using namespace std;
int main(void) {
const int SCORES_SIZE = 4;
int bonusScores[SCORES_SIZE];
int i = 0;
bonusScores[0] = 10;
bonusScores[1] = 20;
bonusScores[2] = 30;
bonusScores[3] = 40;
for(i = 0;i<SCORES_SIZE-1;i++)
{
bonusScores[i]+=bonusScores[i+1];
}
/* Your solution goes here */
for (i = 0; i < SCORES_SIZE; ++i) {
printf("%d ", bonusScores[i]);
}
printf("\n");
return 0;
}
See attachment for .cpp file
Answer:int main() {
const int SCORES_SIZE = 4;
int bonusScores[SCORES_SIZE];
int i;
for (i = 0; i < SCORES_SIZE; ++i) {
cin >> bonusScores[i];
}
for (i = 0; i < SCORES_SIZE-1; ++i){
bonusScores[i] += bonusScores[i+1];
}
for (i = 0; i < SCORES_SIZE; ++i) {
cout << bonusScores[i] << " ";
}
cout << endl;
return 0;
}
Explanation: SCORES_SIZE -1 will prevent the for loop from going past the last value in the array. bonusScores[i] += will add the value of bonusScores[i+1] to the original bonusScores[i].
for example, i = 1; 1 < SCORES_SIZE - 1 ; bonusScores[1] += bonusScores[1+1} becomes{ bonusScores[1] + bonusScores{2];
Charles Montesquieu believed that the
Legislative Branch should do what?
A. Make laws
B. Enforce laws
C. Interpret laws
elles sone. All Rights Resed.
Answer:
A. Make Laws
Explanation:
Montesquieu believed the ways to go about limiting the power of a monarch would be to split up power among 3 groups, Judicial, Legislative and Executive. The American Presidential system and Constitution used Montesquieu's writings as a foundation for their principles.
Judicial Interprets lawsLegislative Makes lawsExecutive Enforces LawIn addition to compiling the list of user access requirements, applications, and systems, the BIA also includes processes that are ____________. These processes safeguard against any risks that might occur due to key staff being unavailable or distracted.
Answer:
automated
Explanation:
Basically a Business Impact Analysis (BIA) estimates and determines the effects of a business activity and process disturbances. These disruptions can be natural or electronic disasters. It also collects information which is used to establish recovery plan. It identifies the business vulnerabilities and works on the strategies in order to reduce such potential hazards. The BIA involves both manual and automated processes. BIA involves automated processes which include the automated software tools that enables the protection of the confidential information of the users and also generates automated reports about the critical business processes.
Convert 2910 to binary, hexadecimal and octal. Convert 5810 to binary, hexadecimal and octal. Convert E316 to binary, decimal and octal. Convert 5916 to binary, decimal and octal. Convert 010010102 to decimal, octal and hexadecimal. Convert 001010102 to decimal, octal and hexadecimal. Convert 438 to binary, decimal and hexadecimal. Convert 618 to binary, decimal and hexadecimal.
Answer:
2910 to binary = 101101011110
2910 to hexadecimal = B5E
2910 to octal = 5536
E316 to binary = 1110001100010110
E316 to octal = 161426
E316 to decimal = 58134
5916 to binary = 101100100010110
5916 to decimal = 22806
5916 to octal = 54426
010010102 to decimal = 149
010010102 to octal = 225
010010102 to hexadecimal = 95
FOR 438 and 618, 8 is not a valid digit for octal..
Consider the following concurrent tasks, in which each assignment statement executes atomically. Within a task, the statements occur in order. Initially, the shared variables x and y are set to 0.
Task 1 Task 2
x = 1 y = 1
a = y b = x
At the end of the concurrent tasks, the values ofa andb are examined. Which of the following must be true?
I. ( a == 0 ) ( b == 1 )
II. ( b == 0 ) ( a == 1 )
III. ( a == 1 ) ( b == 1 )
(A) I only
(B) II only
(C) III only
(D) I and II only
(E) I, II, and III
Answer:
(D) I and II only
Explanation:
Concurrent tasks is when there is more than one task to be performed but the order of the task is not determined. The tasks occur asynchronously which means multiple processors occur execute input instruction simultaneously. When x =1 and y = 1, the concurrent task will be performed and the a will be zero or either 1.
The university computer lab’s director keeps track of lab usage, as measured by the number of students using the lab. This function is important for budgeting purposes. The computer lab director assigns you the task of developing a data warehouse to keep track of the lab usage statistics. The main requirements for this database are to:
Answer:
to keep count of how many users there are in total.
Explanation:
all i had to do was read the question twice to understand the answer is pretty
much in the question.
The director of the computer lab tasks with creating a data warehouse to manage lab utilization data. The major needs for this database are to keep count of how many users there are in total.
What is the budgeting process?
The tactical measures used by a corporation to create a financial plan are the budgeting processes. Budgeting for a future time entails more than simply allocating spending; it also entails figuring out how much income is required to achieve organizational objectives.
These procedures are used by accounting departments to regulate corporate activities, particularly expenditure. A person may use budgeting process to record how much money a business makes and spends over a specific time period.
Therefore, With the aid of budgeting, it may establish financial objectives for the team and the entire organization.
Learn more about the budgeting process, refer to:
https://brainly.com/question/21411418
#SPJ2
Anyone help pls ? Complete the code below to add css to make the background of the web page orange.
< html>
Answer:
In HTML file
<body style="background-color:orange;">
Or
In CSS file
body {
background-color: orange;
}
Write a program that takes in an integer in the range 10 to 100 as input. Your program should countdown from that number to 0, printing
the count each of each iteration After ten numbers have been printed to the screen, you should start a newline. The program should stop
looping at 0 and not output that value
I would suggest using a counter to cổunt how many items have been printed out and then after 10 items, print a new line character and
then reset the counter.
important: Your output should use %3d" for exact spacing and a space before and after each number that is output with newlines in order
to test correctly. In C please
Answer:
The program written in C language is as follows
#include<stdio.h>
int main()
{
//Declare digit
int digit;
//Prompt user for input
printf("Enter any integer: [10 - 100]: ");
scanf("%d", &digit);
//Check if digit is within range 10 to 100
while(digit<10 || digit >100)
{
printf("Enter any integer: [10 - 100]: ");
scanf("%d", &digit);
}
//Initialize counter to 0
int counter = 0;
for(int i=digit;i>0;i--)
{
printf("%3d", i); //Print individual digit
counter++;
if(counter == 10) //Check if printed digit is up to 10
{
printf("\n"); //If yes, print a new line
counter=0; //And reset counter to 0
}
}
}
Explanation:
int digit; ->This line declares digit as type int
printf("Enter any integer: [10 - 100]: "); -> This line prompts user for input
scanf("%d", &digit);-> The input us saved in digit
while(digit<10 || digit >100) {
printf("Enter any integer: [10 - 100]: ");
scanf("%d", &digit); }
->The above lines checks if input number is between 10 and 100
int counter = 0; -> Declare and set a counter variable to 0
for(int i=digit;i>0;i--){ -> Iterate from user input to 0
printf("%3d", i); -> This line prints individual digits with 3 line spacing
counter++; -> This line increments counter by 1
if(counter == 10){-> This line checks if printed digit is up to 10
printf("\n"); -> If yes, a new line is printed
counter=0;} -> Reset counter to 0
} - > End of iteration
For the PSoC chip what is the minimum voltage level in volts that can be considered to logic one?
Answer:
Asian man the man is one 1⃣ in a and the perimeters are not only
Identify a logical operation (along
with a corresponding mask) that, when
applied to an input string of 8 bits,
produces an output string of all 0s if and
only if the input string is 10000001.
Answer: Provided in the explanation section
Explanation:
The Question says;
Identify a logical operation (along
with a corresponding mask) that, when
applied to an input string of 8 bits,
produces an output string of all 0s if and
only if the input string is 10000001.
The Answer (Explanation):
XOR, exclusive OR only gives 1 when both the bits are different.
So, if we want to have all 0s, and the for input only 10000001, then we have only one operation which satisfies this condition - XOR 10000001. AND
with 00000000 would also give 0,
but it would give 0 with all the inputs, not just 10000001.
Cheers i hope this helped !!
The Nigerian 4-6-9 scam refers to a fraudulent activity whereby individuals claiming to be from a foreign country will promise a victim large sums of money for assisting them in secretly moving large sums of money.
a. True
b. False
Answer:
b. False
Explanation:
The system of fraud is called 4-1-9 scam. And yes, victims are always promised large sum of money to secretly help in moving a large sum of money.
public class Student {
private String getFood() {
return "Pizza";
}
public String getInfo() {
return this.getFood();
}
}
public class GradStudent extends Student {
private String getFood() {
return "Taco";
}
public void teach(){
System.out.println("Education!");
getInfo();
}
}
What is the output from this:
Student s1 = new GradStudent();
s1.teach();
Education! would be printed, followed by a run-time error when getInfo is called.
Education! Pizza
This code won't run because it won't compile.
Education! Taco
This code causes a run-time error because getInfo is not declared in the GradStudent class.
Answer:
getInfo(); ==
getSy.Info()
Explanation:
Get System Info
Look at attachment.
Answer: Choice 1
Explanation:
The turtle will loop around 9 times since each time we are subtracting 10 until it hits 10 from 100. Only the first one seems to be like that.
Hope that helped,
-sirswagger21
Answer:
Explanation:
I switch.my acounntt it got hacked
Alejandra is using a flash drive that a friend gave to her to copy some financial records from the company database so she can complete a department presentation at home. She does not realize that the flash drive is infected with a virus that enables a malicious hacker to take control of her computer. This is a potential __________ to the confidentiality of the data in the files
Answer:
maybe threat?
Explanation:
The following numbers are inserted into a linked list in this order:
10, 20, 30, 40, 50, 60
What would the following statements display?
pCur = head->next;
cout << pCur->data << " ";
cout << pCur->next->data << endl;
a) 20 30
b) 40 50
c) 10 20
d) 30 40
Answer:
A. 20 30
Explanation:
Given
Linked list: 10, 20, 30, 40, 50, 60
Required
The output of the following code segment
pCur = head->next;
cout << pCur->data << " ";
cout << pCur->next->data << endl;
A linked list operates by the use of nodes which begins from the head to the next node, to the next, till it reaches the last;
The first line of the code segment; "pCur = head->next; " shifts the node from the head to the next node
The head node is the node at index 0 and that is 10;
This means that the focus has been shifted to the next at index 1 and that is 20;
So, pCur = 20
The next line of the code segment; cout << pCur->data << " "; prints pCur and a blank space
i.e. "20 " [Take note of the blank space after 20]
The last line "cout << pCur->next->data << endl; " contains two instructions which are
1. pCur = next->data;
2. cout<<pCur->data;
(1) shifts focus to the next node after 20 ; This gives pCur = 30
(2) prints the value of pCur
Hence, the output of the code segment is 20 30
C++ Problem: In the bin packing problem, items of different weights (or sizes) must be packed into a finite number of bins each with the capacity C in a way that minimizes the number of bins used. The decision version of the bin packing problem (deciding if objects will fit into <= k bins) is NPcomplete. There is no known polynomial time algorithm to solve the optimization version of the bin packing problem. In this homework you will be examining three greedy approximation algorithms to solve the bin packing problem.
- First-Fit: Put each item as you come to it into the first (earliest opened) bin into which it fits. If there is no available bin then open a new bin.
- First-Fit-Decreasing: First sort the items in decreasing order by size, then use First-Fit on the resulting list.
- Best Fit: Place the items in the order in which they arrive. Place the next item into the bin which will leave the least room left over after the item is placed in the bin. If it does not fit in any bin, start a new bin.
Implement the algorithms in C++. Your program named bins.cpp should read in a text file named bin.txt with multiple test cases as explained below and output to the terminal the number of bins each algorithm calculated for each test case. Example bin.txt: The first line is the number of test cases, followed by the capacity of bins for that test case, the number of items and then the weight of each item. You can assume that the weight of an item does not exceed the capacity of a bin for that problem.
3
10
6
5 10 2 5 4 4
10
20
4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6
10
4
3 8 2 7
Sample output: Test Case 1 First Fit: 4, First Fit Decreasing: 3, Best Fit: 4
Test Case 2 First Fit: 15, First Fit Decreasing: 10, Best Fit: 15
Test Case 3 First Fit: 3, First Fit Decreasing: 2, Best Fit: 2
xekksksksksgBcjqixjdaj
What is a manifold on a vehicle
Answer:
the part of an engine that supplies the fuel/air mixture to the cylinders
Explanation:
There is also an exhaust manifold that collects the exhaust gases from multiple cylinders into a smaller number of pipes
What are the best data structures to create the following items? And why?
1. Designing a Card Game with 52 cards.
2. Online shopping cart (Amazon, eBay, Walmart, Cosco, Safeway, ...)
3. Online waiting list (De Anza College class waiting list, ...)
4. Online Tickets (Flight tickets, concert tickets, ...)
Answer:
The best structures to create the following items are
ARRAYHASHMAPS QUEUE SORTED LINK LISTSExplanation:
The best structures to create the following items are:
Array : for the storage of cards in a card game the best data structure to be used should be the Array data structure. this is because the size of the data ( 52 cards ) is known and using Array will help with the storing of the cards values in the Game.Hashmaps : Hashmap data structure should be implemented in online shopping cart this IS BECAUSE items can be easily added or removed from the cart therefore there is a need to map the Items ID or name to its actual database online waiting list are usually organised/arranged in a first-in-first-out order and this organization is best created using the queue data structure Sorted link lists is the best data structure used to create, store and manage online tickets. the sorted link data structure helps to manage insertions and deletions of tickets in large numbers and it also reduces the stress involved in searching through a large number of tickets by keeping the tickets in sorted listsRemember to save _____ and be certain that you have your files saved before closing out.
A laptop computer has two internal signals: An unplugged signal, which is '1' if the laptop's power supply is connected, and '0' otherwise. A low battery signal, which is '0' if the laptop's battery has reached an almost empty state, and '1' otherwise. Suppose the laptop's power control system accepts a single hibernate signal which determines if the laptop should change its current operating state and shut down. If the laptop should shut down when the battery is low and its charger is unplugged, which gate could be used to produce the hibernate signal?
Answer:
The correct usage is a NOR gate which is indicated in the explanation.
Explanation:
The truth table for the given two signals, namely
p=unplugged signal
q=low battery signal
can form a truth table of following form
Here p has 2 states
1 if the power supply is connected
0 otherwise
Similarly q has 2 states
0 if the battery has reached almost zero state
1 otherwise
As the condition for the Hibernate Signal is given as to only activate when the battery is low and the power supply is not connected. This indicate that the value of Hibernate signal should be 1 when both p and q are 0.
Using this condition, the truth table is formed as
unplugged signal | low battery signal | Hibernate Signal
0 | 0 | 1
0 | 1 | 0
1 | 0 | 0
1 | 1 | 0
Now the truth table of NOR is given as
a | b | a or b | ~(a or b)
0 | 0 | 0 | 1
0 | 1 | 1 | 0
1 | 0 | 1 | 0
1 | 1 | 1 | 0
This indicates that the both truth tables are same thus the NOR gate is to be used for this purpose.
Convert each of the following for loops into an equivalent while loop. (You might need to rename some variables for the code to compile, since all four parts a-d are in the same scope.)
// a.
System.out.println("a.");
int max = 5;
for (int n = 1; n <= max; n++) {
System.out.println(n);
}
System.out.println();
// b.
System.out.println("b.");
int total = 25;
for (int number = 1; number <= (total / 2); number++) {
total = total - number;
System.out.println(total + " " + number);
}
System.out.println();
// c.
System.out.println("c.");
for (int i = 1; i <= 2; i++) {
for (int j = 1; j <= 3; j++) {
for (int k = 1; k <= 4; k++) {
System.out.print("*");
}
System.out.print("!");
}
System.out.println();
}
System.out.println();
// d.
System.out.println("d.");
int number = 4;
for (int count = 1; count <= number; count++) {
System.out.println(number);
number = number / 2;
}
Answer:
~CaptnCoderYankee
Don't forget to award brainlyest if I got it right!
Write a class called Triangle that can be used to represent a triangle. It should include the following methods that return boolean values indicating if the particular property holds: a. isRight (a right triangle) b. isScalene (no two sides are the same length) c. isIsosceles (exactly two sides are the same length) d. isEquilateral (all three sides are the same length).
Answer:
Explanation:
import java.io.*;
class Triangle
{
private double side1, side2, side3; // the length of the sides of
// the triangle.
//---------------------------------------------------------------
// constructor
//
// input : the length of the three sides of the triangle.
//---------------------------------------------------------------
public Triangle(double side1, double side2, double side3)
{
this.side1 = side1;
this.side2 = side2;
this.side3 = side3;
}
//---------------------------------------------------------------
// isRight
//
// returns : true if and only if this triangle is a right triangle.
//---------------------------------------------------------------
boolean isRight()
{
double square1 = side1*side1;
double square2 = side2*side2;
double square3 = side3*side3;
if ((square1 == square2 + square3) ||
(square2 == square1 + square3) ||
(square3 == square1 + square2))
return true;
else
return false;
}
// isValid
// returns : true if and only if this triangle is a valid triangle.
boolean isValid()
{
if ((side1 + side2 < side3) ||
(side1 + side3 < side2) ||
(side2 + side3 < side1))
return false;
else
return true;
}
// isEquilateral
//
// returns : true if and only if all three sides of this triangle
// are of the same length.
boolean isEquilateral()
{
if (side1 == side2 && side2 == side3)
return true;
else
return false;
}
// isIsosceles
//
// returns : true if and only if exactly two sides of this triangle
// has the same length.
boolean isIsosceles()
{
if ((side1 == side2 && side2 != side3) ||
(side1 == side3 && side2 != side3) ||
(side2 == side3 && side1 != side3))
return true;
else
return false;
}
// isIsosceles
// returns : true if and only if exactly no two sides of this
// triangle has the same length.
boolean isScalene()
{
if (side1 == side2 || side2 == side3 || side1 == side3)
return false;
else
return true;
}
}
//-------------------------------------------------------------------
// class Application
//
// This class is the main class of this application. It prompts
// the user for input to construct a triangle, then prints out
// the special properties of the triangle.
//-------------------------------------------------------------------
public class Application
{
//---------------------------------------------------------------
// getInput
//
// input : stdin - BufferedReader to read input from
// msg - message to prompt the user with
// returns : a double value input by user, guranteed to be
// greater than zero.
//---------------------------------------------------------------
private static double getInput(BufferedReader stdin, String msg)
throws IOException
{
System.out.print(msg);
double input = Double.valueOf(stdin.readLine()).doubleValue();
while (input <= 0) {
System.out.println("ERROR : length of the side of triangle must " +
"be a positive number.");
System.out.print(msg);
input = Double.valueOf(stdin.readLine()).doubleValue();
}
return input;
}
//---------------------------------------------------------------
// printProperties
//
// input : triangle - a Triangle object
// print out the properties of this triangle.
//---------------------------------------------------------------
private static void printProperties(Triangle triangle)
{
// We first check if this is a valid triangle. If not
// we simply returns.
if (!triangle.isValid()) {
System.out.println("This is not a valid triangle.");
return;
}
// Check for right/equilateral/isosceles/scalene triangles
// Note that a triangle can be both right triangle and isosceles
// or both right triangle and scalene.
if (triangle.isRight())
System.out.println("This is a right triangle.");
if (triangle.isEquilateral())
System.out.println("This is an equilateral triangle.");
else if (triangle.isIsosceles())
System.out.println("This is an isosceles triangle.");
else
// we do not need to call isScalene here because a triangle
// is either equilateral/isosceles or scalene.
System.out.println("This is an scalene triangle.");
}
// main
// Get the length of the sides of a triangle from user, then
// print out the properties of the triangle.
public static void main(String args[]) throws IOException
{
BufferedReader stdin = new BufferedReader
(new InputStreamReader(System.in));
double side1 = getInput(stdin,
"What is the length of the first side of your triangle? ");
double side2 = getInput(stdin,
"What is the length of the second side of your triangle? ");
double side3 = getInput(stdin,
"What is the length of the third side of your triangle? ");
System.out.print("Pondering...\n");
printProperties(new Triangle(side1, side2, side3));
}
}
Three examples of parameter-parsing implementation models are: (1)________, (2)________, and (3)________.
Answer:1) Parse-by-value
2) Parse-by-reference
3) Parse-by-name
Explanation: Parameter parsing refers to a communication among procedures or functions.
The values of a variable procedure are transferred to the called procedure by some mechanisms. Different techniques of parameter-parsing include; parse-by-value, parse-by-reference, parse-by-copy restore, parse-by-name.
The new Director of Information Technology has asked you to recommend a strategy to upgrade the servers on their network. Recommendations on server hardware, CPU chip set, speed, and caching are needed. You should also recommend which servers to upgrade first and determine whether any servers are still appropriate to keep.
Answer:
servers to be upgraded are : APPLICATION AND LOAD BALANCING SERVERS
servers still appropriate to use : DNS AND DHCP SERVERS
Explanation:
The recommendations to be made in line with what the new director of information is asking for includes :
1 ) For the servers to be upgraded : The servers that requires upgrades includes the APPLICATION SERVER and LOAD BALANCING SERVER. this is because these two servers are critical to the growth/expansion of any business, and they handle large volume of data
Recommendations on the servers upgrade includes:
Hardware : 2.3 GHz Intel Xeon Gold 5118 12-Core
CPU chip set : Socket: FCLGA3647, Type: NSBM
Speed : processor 3.2 GHz
caching: > 100 Gb
2) For servers that do not necessarily need to be upgraded : The servers that do not need immediate upgrade are DNS and DHCP
When implementing a physical database from a logical data model, you must consider database performance by allowing data in the database to be accessed more rapidly. In order to increase data availability, the DBA may break up data that are accessed together to be stored together. Which method will improve the performance of this structure when running queries? What are advantages and disadvantages of this method?
Answer:
A method used to improve the performance of structure when running queries is known as Partitioning indexes.
The advantages of partitioning indexes are, It enables data management operations for example, index creation and rebuilding, It increases query performance.
The disadvantages are, one cannot define the primary index of partitioned table to be unique unless the whole partitioning column set is part of the primary index definition.
Explanation:
Solution
Partitioning indexes are known as b -tress indexes that shows hon how to break up the index into separate or different partitions.
Partitioning is usually done to enhance the performance and increased availability. when data are spread over multiple partitions, one can be able to operate on one partition without affecting others. i.e to run utilities, or to take data offline.
Almost all DBMS products support partitioning, but in various ways. we must be sure to know the nuances of an individual a particular DBMS execution before partitioning.
The advantages of Partitioned indexes are as follows:
It enables data management operations for example, index creation and rebuilding
It increases performance of query
It can significantly the impact of schedule downtime for maintenance operations
Disadvantages:
The primary index of partitioned table cannot be described to be unique except if the whole partitioning column set is part of the primary index definition.
In which contingency plan testing strategy do individuals follow each and every IR/DR/BC procedure, including the interruption of service, restoration of data from backups, and notification of appropriate individuals?
a. Full-interruption
b. Desk check
c. Simulation
d. Structured walk-through
Answer:Full-interruption--A
Explanation: The Full-interruption is one of the major steps for a Disaster Recovery Plan, DRP which ensures businesses are not disrupted by saving valuable resources during a disaster like a data breach from fire or flood.
Although expensive and very risky especially in its simulation of a disruption, this thorough plan ensures that when a disaster occurs, the operations are shut down at the primary site and are transferred to the recovery site allowing Individuals follow every procedure, ranging from the interruption of service to the restoration of data from backups, also with the notification of appropriate individuals.
Enter a formula in cell C9 using the PMT function to calculate the monthly payment on a loan using the assumptions listed in the Status Quo scenario. In the PMT formula, use C6 as the monthly interest rate (rate), C8 as the total number of payments (nper), and C4 as the loan amount (pv). Enter this formula in cell C9, and then copy the formula to the range D9:F9.
Answer:
=PMT(C6,C8,C4)
Put that in cell c9
Then use the lower right of the cell to drag it from D9:F9
In this exercise we have to use excel knowledge, so we have to:
=PMT(C6,C8,C4) in the cell C9 and extended to D9:F9
How is PMT calculated in Excel?PMT, one of the financial functions, calculates the payment for a loan based on constant payments and a constant interest rate. Use the Excel Formula Coach to figure out a monthly loan payment.
For this we need to put the form as:
=PMT(C6,C8,C4)
See more about excel at brainly.com/question/12788694
You acquire a network vulnerability-scanning tool and try it out on a network address segment belonging to people at your university of business. The scanner identifies one computer named Prince Hal that has many serious vulnerabilities. You deduce to whom the machine belongs. Explain the ethical implication of:________.
a. telling the owner what you have found,
b. telling you local administrator or security officer what you have found
c. exploiting one of the relatively minor vulnerabilities to show the owner how serious the exposure is
d. exploiting a relatively minor vulnerability as a prank without telling the owner,
e. telling the owner what you have found and the demanding money for details on the vulnerabilities
f. using one of the vulnerabilities to acquire control of the machine, downloading and installing patches and changing settings to address all the vulnerabilities, and never telling anyone what you have done.
Answer and Explanation:
The speculates on either the morality of transmitting vulnerabilities to an individual over all the internet. The node is a very possible target of a criminal charge, these are highly recommended in terms of the problem not just ethical.The question argues the etiquette of telling a compromised network infrastructure to something like a domain admins or security guard. Throughout this case the primary admin issue is power. Informing individuals about both the potential problem is prudent or legal, which is also preferable to recommend the future course of action.The speculates on either the moral values of leveraging the infrastructure for a mild vulnerability. This same proprietor including its node is truly likely to be victims of a prospective infringement, and therefore it is advantageous to notify him including its problem that the equitable access is considered to become an ethical manipulate susceptibility for possessor data as well as potential threats to understanding.The theories a small flaw throughout the channel's ethics. The device's leader is the likely guilty party of even a future offense to notify him of both the actual problem. The law is ridiculous as well as comparable to trying to hack without permission vulnerability it's immoral vulnerability.The content upon the ethical principles of manipulating the channel's small susceptibility. The device's owner seems to be the likely casualty of such a future offense to instruct him including its subject. As well as trying to sell him much farther documents socially responsible borders. It's the holder who has so far notified the weakness she perhaps she has just one option to obtain products and services. Having clear data on the sale still seems to be ethical.The issue argues mostly on ethics with repairing security flaws without channel assent. Although the controlled variable of the modules has been the true likely target of such a future infringement, exploiting susceptibility without permission is appropriate as well as unethical, this same objective being honorable as well as noble.random integer between 3 and 13 (inclusive)
Answer:
6
Explanation:
Answer:
4
Explanation:
It is between 3 and 13. Please answer some of my questions too! :)
What password did the boss gave to the man?
Answer:
1947
Explanation:
because i dont know
Answer:
where is the password?
Explanation:
TCPDump is used by Wireshark to capture packets while Wireshark own function is:
a. to provide a graphical user interface (GUI) and several capture filters.
b. to act as an intrusion prevention system (IPS) by stopping packets from a black-listed website or packets with payloads of viruses.
c. to defend the network against TCP SYN Flooding attacks by filtering out unnecessary TCP packets.
d. yet to be defined.
Answer:
a. to provide a graphical user interface (GUI) and several capture filters
Explanation:
TcPDump is a command line tool used to capture packets. TcPDump is used to filter packets after a capture has been done. To control network interfaces, TcPDump need to be assigned root privileges. Data is represented in form of text
Wireshark provide a graphical user interface (GUI) and several capture filters. It is a graphical tool used in packet capture analysis. Data is represented in wireshark as text in boxes.
