[tex]Br_{3} CCOOH[/tex]+[tex]F_{3} CCOONa[/tex] → [tex]F_{3} CCOONaH + Br_{3} CCOO^{-}[/tex]
What is the significance of chemical equations?Chemical equations show us the products of reactions as well as how they form. They can be used to predict the outcomes of a reaction. We can predict what will happen if magnesium (a metal) reacts with hydrochloric acid (an acid, of course!) using this rule.When one or more chemicals are converted into one or more other chemicals, a chemical reaction occurs. Examples include iron and oxygen reacting to form rust, and vinegar and baking soda reacting to form sodium acetate, carbon dioxide, and water.A chemical equation is a symbolic representation of a chemical reaction in the form of symbols and formulae, with the reactant entities on the left and the product entities on the right, with a plus sign between the entities in both the reactants and the products and an arrow pointing towards the products and indicating the direction of the reaction. The absolute values of the stoichiometric numbers are represented by the coefficients next to the symbols and formulae of entities. Jean Beguin drew the first chemical equation in 1615.
To learn more about chemical equations refer to
https://brainly.com/question/6258301
#SPJ4
What are anisotropic azobenzene materials? how is the structure of the compounds related to this phenomenon?
Anisotropic azobenzene materials are photoresponsive materials, very important in photochemistry.
The π-conjugated system and ring-substitution in azobenzene gives specific absorption in the UV-visible range of the spectrum.
Anisotropy is the property of a material which allows it to assume different properties in different directions.
Azobenzene is an aromatic molecule where two phenyl rings are connected with azo bond (–N=N–); see the picture below.
Azobenzene has the mesogenic property.
Anisotropic azobenzene materials have photoresponsive properties such as birefringence, phase transition, photoinduced colloidal deformation, surface-relief-gratings, bending, spontaneous surface pattern and dichroism.
The spectra of the cis- and trans-azobenzenes are distinct but overlapping.
More about isotropic: brainly.com/question/13045529
#SPJ4
What is the net force and direction of the block?
Answer:
We know that the forces are added if they are in the same direction and they are subtracted if they are in opposite directions. So, the net force = 10 N (North) + 10 N (North) = 20 N (North) and 8 N (West) - 8 N (East) = 0. Therefore the net force on the block is 20 N in the North direction.
A concrete column has a diameter of 370 mm and a length of 2.2 m. If the density (mass//volume) of concrete is 2.45 mg/m^3. Determine the weight of the column in pounds.
The weight of the column is 1273.85 pounds.
r = 370 mm/2 = 185 mm
r = 0.185 m; a radius of a concrete column
l = 2.2 m; a length of a concrete column
d = 2.45 Mg/m³; density of a concrete
V = r² × π × l
V = (0.185 m)² × 3.14 × 2.2 m
V = 0.236 m³; volume of a column
m = d × V
m = 2.45 Mg/m³ × 0.236 m³
m = 0.578 Mg
1 Mg = 1000 kg
m = 578.2 kg; mass of concrete
W = 578.2 kg × 9.8 m/s²
W = 5666.36 N
W = 5666.36 N × 0.225 Ibf/N
W = 1273.85 Ibf; weight of a concrete
The weight of an object is the amount of force acting on the object due to gravity. SI unit for weight is newton (N).
More about weight: brainly.com/question/17306051
#SPJ4
I REALLY NEED HELP WITH THIS ASSIGNMENT!
The maximum number of significant figure of the reading obtained in the thermometer is 3.
What is significant figure?Significant figures are used to establish the number which is presented in the form of digits.
A significant figure is a figure or a digit that contributes to how accurately something can be measured.
For the given thermometer, the reading of the digits is in 2 significant figure and the calibration is in one digit.
combining the 2 digits of reading and 1 digit calibration gives 3 significant figures.
Thus, the maximum number of significant figure of the reading obtained based on the calibration of the thermometer is 3.
Learn more about significant figures here: https://brainly.com/question/24491627
#SPJ1
A compound containing carbon, hydrogen, and nitrogen used in rocket fuels. When burned in an excess of oxygen, a 0. 312 g sample yields 0. 458 g co2 and 0. 374 g h2o. In a separate experiment, the nitrogen content of a 0. 486 g sample is converted to 0. 226 g n2. What is the empirical formula of the compound?.
The empirical formula of the compound is [tex]CH_{4}N[/tex].
We calculate the empirical formula by calculating the mass of every individual element in the compound and then calculating the corresponding moles.
0.458 g CO2 / 44 g/mol = 0.0104 mol ⇒ 0.0104 mol of C ⇒ 0.0104 mol x 12 g/mol = 0.125 g of C
0.374 g H2O / 18 g/mol = 0.0208 mol ⇒ 0.0416 mol of H ⇒ 0.0416 mol x 1 g/mol = 0.0416 g of H
0.486 g : 0.226 g = 0.312 g : X
X = 0.145 g of N
0.145 g / 14 g/mol = 0.0104 mol of N
0.0104 mol of C
0.0416 mol of H
0.0104 mol of N
When divided by 0.0104 mol, we get the C : H : N ratio of 1 : 4 : 1, giving us the empirical formula of [tex]CH_{4}N[/tex].
You can learn more about empirical formulas here:
brainly.com/question/14425592
#SPJ4
A+14-karat+gold+ring+contains+58.3%+gold+and+weighs+12.41+g.+if+gold+sells+for+$308.00/ounce,+what+is+the+value+of+the+gold+in+the+ring?
The value of the gold in the ring is $78.50.
m(ring) = 12.41 g; mass of the ring
m(Au) = 0.583 × 12.41 g
m(Au) = 7.235 g; the mass of gold in the ring
m(Au) = 7.235 g × 0.0352 g/ounce
m(Au) = 0.255 ounce
value = 0.255 ounce × $308.00/ounce
value = $78.50; the value of the gold in the ring
Karat is a measure of the purity of gold. A gold karat is 1/24 part of the whole.
Gold is very ductile and can be drawn into a monoatomic wire or used in the production of rings.
More about karat: brainly.com/question/13808328
#SPJ4
A student is trying to identify an unknown mineral sample. The sample has a mass of 150 g and displaces 30 mL of water. Which mineral does the student have
please helpp
write out each of the following numbers in long form:
b) 3.5 x 10 to the -5 power
f) 5 x 10 to the -6 power
g) 9.823 x 10 to the -9 power
i) 2.6 x 10 to the -4 power
j) 8 x 10 to the 8th power
Explanation:
b) .000035
f) .000005
g) .000000009823
i) .00026
j) 800000000
How many protonation states would a cys have if it were the n-terminal amino acid of a polypeptide?
This rule is used to quickly determine protonation, and hence charge state, and is extremely important to know (and easy to derive).
What is protonation?In many stoichiometric and catalytic reactions, protonation—a fundamental chemical reaction—takes place as a first step. Many biological macromolecules, including certain ions and molecules that can undergo more than one protonation, are classified as polybasic. Most acid-base reactions result in protonation and deprotonation (the removal of a proton), which are at the center of most theories relating to these reactions.
An element that protonates another element is referred to as a Brnsted-Lowry acid. In some analytical processes, such as electrospray mass spectrometry, protonation of a substrate is a necessary step since it causes the species' mass and charge to both increase by one unit. In addition to changing the charge and mass of a molecule or ion, protonation and deprotonation can also alter many other chemical properties.
To learn more about protonation from the given link:
https://brainly.com/question/15215343
#SPJ4
The pka of nh4 /nh3 is 9.25. calculate the ph of a solution containing 0.12 m nh4cl and 0.03 m naoh.
The pH of given solution is 8.77. It can be calculated by the pka value of NH₄/NH₃ and molar concentrations of both the ionic compounds.
A solution containing 0.12 NH₄Cl and 0.03 moles of NaOH undergoes a reaction in which NaOH reacts with NH₄Cl to form NaCl, producing NH₃ and H₂O.
NH₄Cl + NaOH = NH₃ + NaCl + H₂O
The pH is therefore equal to the sum of the pKa and the logarithm of the base concentration divided by the acidity. In both cases the base concentration is 0.03 molar. When sodium hydroxide is added, 1 mole of ammonia is produced for each mole added. The result is less ammonium with each addition of hydroxide.
This is how we come to a solution.
pH = pKa + log [base]/log [acid]
pH = 9.25 + log 0.03/log 0.12
pH = 8.77
To learn more on Calculation of pH, please refer:
Brainly.com/question/28343443
#SPJ4
How many atoms of carbon are present in 8.06 grams of carbon tetrabromide ? atoms of carbon .
1.463×10²² atoms of carbon are present in carbon tetrabromide.
m(CBr₄) = 8.06 g; mass of carbon tetrabromide
M(CBr₄) = 331.63 g/mol; molar mass of carbon tetrabromide
n(CBr₄) = m(CBr₄) ÷ M(CBr₄)
n(CBr₄) = 8.06 g ÷ 331.63 g/mol
n(CBr₄) = 0.0243 mol; amount of carbon tetrabromide
There is one carbon atom in one molecule of carbon tetrabromide: n(CBr₄) : n(C) = 1 : 1
n(C) = 0.0243 mol; amount of carbon atom
N(C) = n(C) × Na.
N(C) = 0.0243 mol × 6.022·10²³ 1/mol.
N(C) = 1.463×10²² atoms of carbon in carbon tetrabromide
Na - Avogadro constant or Avogadro number.
More about atom: brainly.com/question/11935748
#SPJ4
Calculate the density of an unknown gas in g/l from the information that 10.9 l of the gas has a mass of 8.72 g. do not include units when submitting your answer.
0.8 is the density of an unknown gas in g/l that has a volume of 10.9 l and has a mass of 8.72 g.
What is density?
The definition of a material's density is the mass per unit volume of that substance. The ratio of mass to volume is known as density, or mass per unit volume. It calculates an object's material content in relation to its volume (cubic metre or cubic centimeter). Density is essentially a measurement of how tightly matter is packed.
Mass of the unknown gas = 8.72g
Volume of the gas = 10.9 l
Density of the gas = mass/volume = 8.72/10.9 g/l = 0.8g/l.
Thus, An unidentified gas with a volume of 10.9 l and a mass of 8.72 g has a density of 0.8 in g/l.
To learn more about density from the given link below,
https://brainly.com/question/18019548
#SPJ4
Under what conditions do the wasteful side reaction of o2 with rubisco become significant?
The wasteful side reaction of o2 with rubisco takes place under increased temperature and intense light conditions.
In the Calvin cycle, photorespiration refers to the chemical reaction that takes place between enzyme rubisco and oxygen by using ATP under light conditions and increased temperature.
The resultant products of this reaction are phosphoglycolate and PGA.
Moreover, phosphoglycolate and PGA can not be utilized for the synthesis of RUBP instead these newly manufactured compounds are processed into a 3-PGA reaction to continue the Calvin cycle where they are consumed to generate glycolate which is ultimately transformed into glycerate.
To put it simply, photorespiration is a reaction in which oxygen combines with rubisco to form 3-PG and 2 phosphoglycolates.
If you need to learn more about rubisco click here:
https://brainly.com/question/13735126
#SPJ4
Which material is a mixture?
A) air
B) water
C) hydrogen
D) ammonia
Molecules that increase the production and release of neurotransmitters are known as?
Molecules which increase neurotransmitter formation and release are termed as calcium.
The release of neurotransmitter molecules is triggered by an increase in calcium. When a neuron becomes depolarized and reaches a threshold, it sends an electrical signal called the action potential down the axon. When the action potential reaches the terminal, voltage gated calcium channels open. This causes an influx of calcium, which binds to proteins and allows the fusion of neurotransmitter-filled vesicles with the membrane. This results in the release of increased level of neurotransmitter into the synapse, where it can cause changes in the postsynaptic cell.
What are Neurotransmitters?
Neurotransmitters are chemicals that neurons release in order to communicate with other neurons or effector tissues such as muscle. There are various types of neurotransmitters, each with a unique effect on the postsynaptic cell.
Find more on neurotransmitters at : brainly.com/question/26387085
#SPJ4
PLEASE I NEED HELP! Which postulate of Dalton's atomic model was later changed and why?
In Dalton Theory the atom of the same element has same mass found also wrong because some elements show different atoms having different masses.
Why postulate of Dalton's atomic model was later changed?That postulate of the Dalton atomic theory was changed that atom is indivisible particle and can be subdivided into smaller particles was later changed and then this statement comes forward that because the atoms can be divided into three more particles which are electron, proton and neutron.
1. The first statement of the Dalton's theory got wrong because due to the indivisibility of the atom.
2. The atom is the smallest particle also found wrong because the atom is further divided in the proton, electron and neutron.
3. The atom of the same element has same mass found also wrong because some elements show different atoms having different masses.
So we can conclude that in Dalton theory the atom of the same element has same mass found also wrong because some elements show different atoms having different masses.
Learn more about Dalton Atomic Model here: https://brainly.com/question/13157325
#SPJ1
A+bare+helium+nucleus+has+two+positive+charges+and+a+mass+of+6.64+10-27+kg.+(a)+calculate+its+kinetic+energy+in+joules+at+7.20%+of+the+speed+of+light.
A+bare+helium+nucleus+has+two+positive+charges+and+a+mass+of+6.64+10-27+kg.+ 7.57×105 eV.
What is nucleus?When you look at a photograph of a cell, the nucleus is among the elements that is most evident. The nucleus, located in the centre of the cell, is home to all of the chromosomes, which are responsible for encoding the genetic material. Consequently, it is crucial to safeguard this area of the cell.
The membrane that surrounds the nucleus maintains all of the chromosomes inside and distinguishes between the chromosomes being inside the nucleus and the other organelles and parts of the cell remaining outside. There are pores in the nuclear membrane that enable molecules to enter and exit the nucleus as necessary, such as when RNA needs to move between the nucleus and the cytoplasm.
to learn more about nucleus from the given link:
https://brainly.com/question/141626
#SPJ4
Does a reaction occur when aqueous solutions of lead(ii) nitrate and aluminum sulfate are combined?
Yes, the reaction will occur .
Al2(SO4)3+3Pb(No3)2 →3PbSO4+2Al(NO3)3.
How can you tell whether a chemical equation has no reaction?We use the (aq) mark to indicate a substance dissolves if it is soluble. We employ the (s) label with a substance and anticipate that it will precipitate out of solution if it is not soluble. There won't be any expected reaction if everything is solvable.
When aqueous solution of lead (II) nitrate and aluminium chloride are combined, lead(II) chloride will precipitate.
To learn more about Reaction refer
https://brainly.com/question/17434463?
#SPJ4
An unknown element has two isotopes, one with a mass of 14.00 amu and 98.632% abundance and one with a mass of 15.00 amu and 1.3668% abundance. Calculate its average atomic mass and identify the element.
The average atomic mass of the element = 14.0135 amu and the element is Nitrogen
Evaluating :
14.00 × 98.632 % + 15.00 × 1.3668 %
= 1,401.35 %
average atomic mass = [tex]\frac{1401.35}{100}[/tex]
= 14.0135 amu
Isotopes :
Isotopes are part of a family of an element that have all the same number of protons but different numbers of neutrons. The number of protons in a nucleus defines the element's atomic number on the Periodic Table. Taking example, carbon is having six protons and it's atomic number 6.
Atomic mass :The average atomic mass (generally known as atomic weight) of an element is the weighted average mass of the atoms in a naturally participating sample of the element. Average masses are generally determined in unified atomic mass units (u), where 1 u is equal to one-twelfth of the mass of a neutral atom of carbon-12.
Learn more about atomic mass :
brainly.com/question/24666479
#SPJ9
Given 1 molecule of glutamate, how much atp can you form by oxidative phosphorylation?
1 molecule of glutamate can form 7.6 ATP can be formed by oxidative phosphorylation .
What is oxidative Phosphorylation ?
In the process of oxidative phosphorylation, oxygen is consumed as electrons are transferred through the mitochondrial electron transport chain and ATP is produced.
The bulk of the ATP required for higher animals and plants to sustain life is produced by oxidative phosphorylation, which is also in charge of creating and preserving metabolic equilibrium.
The glutamate carrier recycles glutamate outside of mitochondria (T9). One aspartate and 7.6 ATP are made at the best return for each glutamine.
To learn more about oxidative phosphorylation, refer to the below link:
https://brainly.com/question/25765324
#SPJ4
A block has a mass of 4.726 g and a volume of 128.9 cm3. calculate the density in g/cm3.
Density = mass/volume
ρ=[tex]=m/v[/tex]
density = 4.726/128.9
density = 0.0366 g/cm3.
What is density?The term "density" refers to the quantity or mass per unit of volume in a particular substance. Mass divided by volume is the formula for calculating density.
Absolute density and relative density are the two main types of density. Relative density, also known as specific gravity, is the ratio of a substance's density to the density of a reference material. The reference substance is often water.
The formula to calculate density is the mass of an object divided by its volume. The standard units are kg/m3.
To learn more about density from the given link:
brainly.com/question/15164682
#SPJ4
When you add 14.0 mL of red liquid to a test tube that already contains 9.0 mL of
liquid, what is the expected value of the total volume?
The expected value of the total volume of the liquuid in the test tube is 23 mL
Data obtained from the questionFrom the question given above, the following data were obatined:
Volume of red liquid = 14 mLVolume of liquid in test tube = 9 mL Total volume of liquid =?How to determine the total volume of liquidThe total volume of the liquid in the test tube can be obtained by adding the volume of the red liquid and the volume of the liquid in the test tube together. This is illustrated below:
Total volume = Volume of red liquid + volume of liquid in test tube
Total volume = 14 + 9
Total volume = 23 mL
Thus, we can conclude that the expected value of the total volume of the liquid is 23 mL
Learn more about volume:
https://brainly.com/question/9523268
#SPJ1
hi!! please help :( lots of points !
Answer:
Structure:
Differences- A polymer is a collection of a large number of molecules whereas a monomer is a single molecule.
A monomer is a single molecule, which has the ability to chemically bond with other monomers in a long chain. A polymer is a chain that is made when monomers bind with other monomers.
Similarities- They are both molecules
Properties:
Differences- Monomers have polyfunctionality, which is the capacity to form chemical bonds to at least two other monomer molecules. Polymers are chemically unreactive, solids at room temperature, malleable, tough, and are electrical insulators.
Similarities- They both makeup larger forms of matter.
Intermolecular Forces
Differences: Polymers are held together by covalent bonds, hydrogen bonds, and dispersion bonds. Monomers are only held together by hydrogen bonds.
Similarities: They can both be bonded together by hydrogen bonds.
3AgBr+GaPO4→Ag3PO4 +GaBr3
43g 54g 25g ?
What is the mass of GaBr,?
Is the reaction above a physical or chemical change?
How do you know?
When water molecules interact, the _____ charged hydrogen end of one molecule is attracted to the _____ charged oxygen end of another molecule.
When water molecules interact, the positively charged hydrogen end of one molecule is attracted to the negatively charged oxygen end of another molecule.
What is hydrogen bonding?Hydrogen bonding is a type of dipole-dipole attraction between molecules, it was not all the time that a covalent bond to a hydrogen atom.
The attractive force will be very strong between a hydrogen atom and the electronegative atoms i.e., N, O, or F atom, etc., as it was covalently bonded to electronegative atom.
Any molecule that has a hydrogen atom directly attached to an oxygen or nitrogen atom is capable of hydrogen bonding. When hydrogen is bonded to fluorine, the attraction of covalent bond was very well.
So, When water molecules interact, the positively charged hydrogen end of one molecule is attracted to the negatively charged oxygen end of another molecule.
Thus, the answer is positively and negatively respectively.
Learn more about Hydrogen bonding,
https://brainly.com/question/10904296
#SPJ4
What is the molecular geometry around an atom in a molecule or ion which is surrounded by one lone pair of electrons and four single bonds.
The molecular geometry is seesaw.
The molecule has the seesaw geometry when it has the central atom with four single bonds with other atoms and one lone pair of electrons (AX4E1 in AXE notation).
VSEPR theory (The Valence Shell Electron Pair Repulsion Theory) uses the AXE notation.
The seesaw geometry is similar to a trigonal bipyramid.
Difference is that in the seesaw geometry one of the atoms is replaced by a lone pair of electrons.
A lone pair of electrons in the seesaw geometry is always in an equatorial position (see the picture below).
Some examples of the molecules with seesaw geometry are sulfur tetrachloride (SF4) and sulfur tetrafluoride (SF4).
More about bond angles: brainly.com/question/25425872
#SPJ4
What is the maximum length of a stem used for pendant lighting before bracing is required?
With no additional bracing needed, the maximum length of the stem utilized for pendant lightning is 12 in. (300 mm) or less. Lateral braces or an explosive flexible coupling must be utilized within 12 inches of the lightning fixture if the length is greater than 12 inches.
If you're planning on installing pendant lighting in your home, you'll need to be aware of the maximum length of the stem that can be used. According to the National Electric Code, the maximum length of the stem for pendant lighting is 12 inches (300 mm) or less. If the length of the stem is greater than 12 inches, you'll need to use lateral braces or an explosive flexible coupling within 12 inches of the lightning fixture. This will help to ensure the safety of your home and prevent any damage from occurring.
Learn more on stem here:
https://brainly.com/question/28181080
#SPJ4
Copper has two isotopes: Cu-63, and Cu-65. The percent abundance of Cu-63 is
69.1%. What is the average atomic mass of copper? Assume the masses listed
are 63.000 and 65.000.
Answer:
63.6 g/mol
Explanation:
If the percent abundance of Cu-63 is 69.1%, then Cu-65 is 30.1% since
100%-69.1%= 30.1%
To find the average atomic mass, multiiply the percentage with the corresponding mass then add the answers together.
(63 x 69.1%) + (65 x 30.1%) = average atomic mass
(63 x .691) + (65 x .301) = 43.533 + 20.085 = 63.618 g/mol = 63.6 g/mol
Calculate the ph of the resulting solution when 2.00 ml2.00 ml of the 3.00 m3.00 m acetic acid is diluted to make a 250.0 ml250.0 ml solution.
The ph of the resulting solution Ka = 1.8x10-5 /0.036-x
The e letters pH stand for the potential of hydrogen since pH is effectively a measure of the concentration of hydrogen ions.
a solution is a special type of homogeneous mixture composed of two or more substances.
3 ml x 3.00 M = 250 ml * x M
x = 0.036 M HAc
Ka = 1.8x10-5 /0.036-x
For more information on ph click on the link below:
https://brainly.com/question/22390063
#SPJ4
What is the fluid speed at point in the pipe where the cross-sectional area is 0.105m2 ?
The speed of the fluid in the pipe through the cross-section of 0.105 m² is 5.21 m/s.
The area of the first cross-section is A1.
A1 = 0.70 m²
The area of the second cross-section is A2.
A2 = 0.105 m²
The velocity of the fluid at the first cross-section is V1.
V1 = 3.50 m/s
Let the velocity of the fluid at the second cross-section be V2.
The speed of the fluid in the pipe through the cross-section of 0.105 m² is,
Area of the first cross-section × Velocity of the fluid through the first cross-section = Area of the second cross-section × Velocity of the fluid through the second cross-section
A1 × V1 = A2 × V2
0.070 × 3.50 = 0.047 × V2
[tex]V2 = \frac{0.070 × 3.50}{ 0.047} [/tex]
= 5.21 m/s
Therefore, the speed of the fluid in the pipe through the cross-section of 0.105 m² is 5.21 m/s.
To know more about velocity, refer to the below link:
https://brainly.com/question/16379705
#SPJ4
