Answer:
A ) CPI : M1 = 2.4 , M2 = 2.65
B ) MIPS : M1 = 1083, M2 = 1056
C ) The machine that has a better performance based on MIPS is M1 and this is by 27 million number of instructions per sec
Explanation:
A) The CPI for each machine
CPI = ( Total number of execution cycles ) / ( instruction counter executed )
For Machine 1 ( M1 )
we have to make some assumptions : number of instructions = 10
number of times A was executed = 4 , Number of times B was executed = 2.5 , number of times C was executed = 2.5, Number of times D was executed = 1. and this was based on the frequency given above
hence CPI for M1 =[ ( 1 * 4 ) + ( 3 * 2.5 ) + ( 3 * 2.5 ) + ( 5 * 1 ) ] / 10
CPI for M1 = 2.4
For Machine 2 ( M2 )
we have to make some assumptions : number of instructions = 10
number of times A was executed = 4 , Number of times B was executed = 2. number of times C was executed = 1.5, Number of times D was executed = 2.5 times. and this was based on the frequency given above
Hence CPI for M1 = [ ( 2 * 4 ) + ( 2 * 2 ) + ( 3 * 1.5 ) + ( 4 * 2.5 ) ] / 10
CPI for M2 = 2.65
B ) Calculate the native MIPS ratings for M1 and M2
MIPS = ( instruction counts ) / ( Execution time * 10^6 )
For M1
Assumptions : number of instructions executed = 10
each clock cycle = 0.3846 * 10^-9. frequency = 2.6 Ghz
first we calculate the total execution time which is equal to :
= [ ( 1 * 4 ) + ( 3 * 2.5 ) + ( 3 * 2.5 ) + ( 5 * 1 ) ] * 0.3846 * 10 ^-9
= 9.2304 * 10 ^-9 secs
therefore the MIPS for M1
= 10 / ( 9.2304 * 10^-9 ) * 10^6 = 1083
For M2
Assumptions : number of instructions executed = 10
each clock cycle = 0.3846 * 10^-9. frequency = 2.8 Ghz
first we calculate the total execution time which is equal to :
= [ (2*4) + (2*2) + (3 * 1.5 ) + ( 4 * 2.5 ) ] * 0.3846 * 10^-9 = 9.4631 * 10^-9 secs
therefor the MIPS for M2
= 10 / ( 9.4631*10^-9) * 10^6 = 1056
C ) The machine that has a better performance based on MIPS is M1 and this is by 27 million number of instructions per sec
Find the Rectangular form of the following phasors?
1. P =10
2. P = 5
3. P = 25
4. P = 54
5. P = 65
6. P = 95
7. P = 250
8. P = 8
9. P = 35
10. P = 150
Answer:
The angles are missing in the question.
The angles are :
45, 30, 60, 90, -34, -56, 20, -42, -65, -15
P=10, P=5, P=25, P=54, P=65, P=95, P=250, P=8, P=35, P=150
Explanation:
1. P = 10, θ = 45° rectangular coordinates
x = r cosθ , y = r sinθ
So, rectangular form is x + iy
x = P cosθ = 10 cos 45°
= 7.07
y =P sinθ = 10 sin 45°
= 7.07
Therefore, rectangular form
x + iy = 7.07 + i (7.07)
2. P = 5 , θ = 30°
x = 5 cos 30° = 4.33
y = 5 sin 30° = 2.5
So, (x+iy) = 4.33 + i (2.5)
3. P = 25 , θ = 60°
x = 25 cos 60° = 12.5
y = 25 sin 60° = 21.65
So, (x+iy) = 12.5 + i (21.65)
4. P = 54 , θ = 90°
x = 54 cos 90° = 0
y = 54 sin 90° = 54
So, (x+iy) = 0+ i (54)
5. P = 65 , θ = -34°
x = 65 cos (-34°) = 53.88
y = 65 sin (-34°) = -36.34
So, (x+iy) = 53.88 - i (36.34)
6. P = 95 , θ = -56°
x = 95 cos (-56)° = 53.12
y = 95 sin (-56)° = -78.75
So, (x+iy) = 53.12 - i (78.75)
7. P = 250 , θ = 20°
x = 250 cos 20° = 234.92
y = 250 sin 20° = 85.5
So, (x+iy) = 234.92 + i (85.5)
8. P = 8 , θ = (-42)°
x = 8 cos (-42)° = 5.94
y = 8 sin (-42)° = -5.353
So, (x+iy) = 5.94 - i (5.353)
9. P = 35 , θ = (-65)°
x = 35 cos (-65)° = 14.79
y = 35 sin (-65)° = -31.72
So, (x+iy) = 14.79 - i (31.72)
10. P = 150 , θ = (-15)°
x = 150 cos (-15)° = 144.88
y = 150 sin (-15)° = -38.82
So, (x+iy) = 144.88 - i (38.82)
The best way to check the efficiency of individual cylinders is:________.
Answer:
To run. The machine one at a time
Explanation:
Which type of robots will NASA use to study the outer space and planets in our solar system?
Answer: These robots study planets from space. The Cassini spacecraft is this type of robot. Cassini studies Saturn and its moons and rings. The Voyager and Pioneer spacecraft are now traveling beyond our solar system
Explanation:
What would be the required voltage of an energy source in a circuit with a current of 10.0 A and a resistance of 11.0 Ω?
Answer:
110 V
Explanation:
V = IR
V = (10.0 A)(11.0 Ω) = 110 volts
factors of production examples for a home?
Answer:
The four factors of production are land, labor, capital, and entrepreneurship. They are the inputs needed for supply. They produce all the goods and services in an economy. That's measured by gross domestic product.
please give brainlist
hope this helped........
Which of the following was the most important group of engineers on the project described in the following scenario? The "Big Dig" in Boston, Massachusetts, redesigned the entire highway system in the city, moving roads underground in many areas. The "Big Dig* required the services of different types of engineers. computer engineers civil engineers manufacturing engineers electrical engineers
Answer:
the answer is A
Explanation:
Answer:
A
Explanation:
Buying shop supplies from the shop owner to work on your own car at home is an ethical practice
Answer:
yes yes it is why wouldn't it be
It is true that buying shop supplies from the shop owner to work on your own car at home is an ethical practice.
What is ethical practice?The term "ethical practises" refers to deeds and conduct that uphold established moral and social norms as well as shared values.
Honesty, fairness, transparency, accountability, respect, and responsibility are the traits that define these procedures.
The precise circumstances and the relationship between the shop owner and the individual will determine if purchasing shop materials from a shop owner to work on your own car at home is an ethical practise.
The exact situation and the relationship between the shop owner and the individual will determine whether or not purchasing shop materials from a shop owner to work on your own car at home is ethical.
Before implementing such a method, it is crucial to think about the possible outcomes and any ethical issues.
Thus, the given statement can be considered as true.
For more details regarding ethical practice, visit:
https://brainly.com/question/30263183
#SPJ2
Drivers must slow down from 60 mi/hr to 40 mi/hr to negotiate a severe curve on a rural highway. A warning sign for the curve is clearly visible for a distance of 120 ft. How far in advance of the curve must the sign be located to ensure that vehicles have sufficient distance to decelerate safely. Use the standard reaction time and deceleration rate recommended by AASHTO for basic braking maneuvers.
Answer: the distance in advance of the curve the sign must be located to ensure that vehicles have sufficient distance to decelerate safely is 292.07 ft
Explanation:
first we calculate the distance to place sign board in advance to curve for decelerating the speed
d = 1.47Si t + [ (Si² - Sf²) / 30(0.348 ± 0.01G)
where d is the safe stopping distance, initial speed is Si (60 mi/hr ), time reaction is t (2.5s), Sf is the final speed (40 mi/hr), G is the grade (0).
so we substitute
d = (1.47 × 60 × 2.5) + [ (60² - 40²) / 30(0.348 ± 0)
= 220.5 + ( 2000/10.44)
= 220.5 + 191.57
= 412.07 ft
Now giving that a warning sign is clearly visible at a distance of 120 ft
optimum safe distance will be
d = minimum distance - sign visible distance
d = 412.07 - 120
d = 292.07 ft
therefore the distance in advance of the curve the sign must be located to ensure that vehicles have sufficient distance to decelerate safely is 292.07 ft
An ideal Otto Cycle has a compression ratio of 9.2 and uses air as the working fluid. At the beginning of the compression process, air is at 98kPa and 20C. The pressure is doubled during the constant volume heat addition process. Assuming constant specific heats, determine:
Answer: hello your question is incomplete below is the complete question
An ideal Otto Cycle has a compression ratio of 9.2 and uses air as the working fluid. At the beginning of the compression process, air is at 98kPa and 20C. The pressure is doubled during the constant volume heat addition process. Assuming constant specific heats, determine:the amount of heat transferred to the air
answer : 609.804 kj/kg
Explanation:
Given data:
compression ratio (r)= 9.2
pressure given(p1) = 98 kPa
Initial temperature = 20 + 273 = 293 k
pressure during constant volume heat addition process = 2p1
note : specific heat at constant pressure and specific heat at constant volume varies with temperature
we use T = 300k because it is closest to T1 = 293 k
hence at T = 300 K ( ideal gas properties of air )
[tex]u_{1}[/tex] = 214.07 Kj/kg
[tex]v _{r1}[/tex] = 621.2
To get [tex]v_{r2}[/tex] = [tex]v_{r1} * \frac{v_{2} }{r}[/tex] = 621.2 * 1 / 9.2 = 67.52
ALSO at [tex]v_{r2}[/tex] = 67.52 ( from ideal gas properties )
[tex]u_{2}[/tex] = 518.9 kj/kg
T2 = 708.32 k
next we apply the gas equation
[tex]\frac{p1v1}{T1} = \frac{p2v2}{T2}[/tex]
hence p2 = (9.2) * [tex]\frac{708.32}{293} * 98[/tex] = 2179.59 kpa
to determine T3 due to the constant volume heat addition
[tex]\frac{T3}{T2} = \frac{P3}{P2}[/tex]
Hence T3 = p3/p2 * T2 = 2( 708.32 ) = 1416.64 k
At T3 = 1416.64 k ( from ideal gas properties )
[tex]u_{3}[/tex] = 1128.704 kj/kg
[tex]v_{r3}[/tex] = 8.592
Determine the amount of heat transferred to the air
[tex]q_{in} = ( u_{3} - u_{2} )[/tex]
= ( 1128.704 - 518.9 )
= 609.804 kj/kg
Given the following MATLAB statement: ( 3 + 2 ) / 5 * 4 + 5 ^ 2 In what order will these operations be done?
Answer:
first is the parentheses, (3+2)=5 next is the exponent 5^2=25, next is the division 5 / 5 = 1, then the multiplication 4*1=4 and then you add 4+25=29. so the answer is 29.
Determine the angles made by the vector V = - 36i + 15j with the positive x- and y-axes. Write the unit vector n in the direction of V.
Answer:
157.38° CCW from +x axis
67.38° CCW from +y axis
n = (12/13)i +(5/13)j
Explanation:
The reference angle is ...
arctan(15/36) ≈ 22.62° . . . . CW from the -x axis
The signs of the component vectors indicate this is a 2nd-quadrant vector, so the angles of interest are ...
157.38° CCW from +x axis
67.38° CCW from +y axis
The unit vector will be ...
n = cos(157.38°)i +sin(157.38°)j
n = (12/13)i +(5/13)j
What are sketches or technical drawings called
Answer:
Technical drawing, also known as drafting or draughting, is the act and discipline of making detailed drawings. These drawings visually communicate how something works or how it is to be made.
A condenser accepts steam from the turbine in problem 2 at a pressure of 2.34 kPa. Saturated water at the same pressure leaves the condenser. (Note: 20 C is the saturation Temperature for 2.34 kPa)) a. Give P, v, u, h and s for the saturated liquid water leaving the condenser. b. How much heat leaves the condenser per kg of steam? c. What is the heat transfer rater from the condenser, assuming a water flow of 1 kg/s,
Answer:
The answer is "83.98, 1889.195, and 1889.195"
Explanation:
Given value:
[tex]\bold{P_{4}=2.34 \ kPa}[/tex]
In point a:
The value of [tex]h_{f4}=83.915 \ \ \frac{Kj}{kg}\\[/tex]
[tex]V_4=0.001002 \ \ \frac{Kj}{kg}\\\\U_4= 83.98 \ \ \frac{Kj}{kg}\\\\[/tex]
In point b:
calculating heat leaves formula= [tex]h_3-h_{f4}[/tex]
[tex]= 1973.11-83.915\\\\= 1889.195 \ \ \frac{KJ}{kg}[/tex]
In point c:
calculating Heat transfer rate formula[tex]=m(h_3-h_4)[/tex]
[tex]= 1(1889.195)\\\\ = 1889.19 \ \ kw.[/tex]
Three loads are connected in parallel across a single-phase source voltage of 480 V (RMS). Load 1 absorbs 10 kW and 8 kVAR; Load 2 absorbs 5 kVA at 0.9 power factor leading; Load 3 absorbs 12 kW at 0.95 power factor leading. Calculate the equivalent impedance, Z, for the three parallel loads, for two cases: (a) Series combination of R and X, and (b) parallel combination of R and X. Problem
Answer:
a) ZT = [ 38.786 ∠-4.28° ] ohms
b) ZT = [ 8.673 ∠4.06° ] ohms
Explanation:
Given that;
Voltage V = 480V
three loads of 1) 10Kw, 8 kVAR
2) 5 kVA, 0.9 power factor lagging
3) 12kW, 0.95 pf leading
Now for load1
Active power P = V^2 / R
Resistance R1 = V^2 / P
= (480 * 480) / 10*1000 = 23.04 OHMS
Reactive power Q = 8kVAR
let x be reactance
Q = V^2 / x
8 * 1000 = (480 * 480) / x
x1 = j28.8 ohms (inductive)
Load 2
Active power = kVA * nf = 5 * 9 = 4.5 Kw
Reactive power = sqrt(S^2 - P^2)
= Sqrt (5^2 - 4.5^2)
= 2.179 kVAR
now Resistance R2 = V^2 / P2 = (480 * 480) / 4.5*10^3
= 51.2 ohms
Reactance X2 = V^2 / Q2 = (480 * 480) / 2.178*10^3
X2 = 105.75 ohms
x2 = -j105.75 ohms (capacitive)
Load 3
Active power = 12kW AND PF = 0.95
so
kVA rating = 12/0.95 = 12.63 kVA
reactive power Q3 = sqrt (12.63^2 - 12^2 )
= 3.94 kVAR
Resistance R3 = V^2/P3 = (480*480) / 12*10^3
= 19.2 ohms
Reactance x3 = V2 / Q3 = (480 * 480) / 3.94*10^3
x3 = 58.47 ohms
x3 = -j58.47 ohms (capacitive)
NOW
a)
series combination of R and X
1/ZT = [1/(R1 + jx1)] + [1/(R2-jx2)] + [1/(R3-jx3)]
we substitute
1/ZT = [1/(23.04 + j28.8)] + [1/(51.2 - j105.74)] + [1/(19.2-58.48)]
1/ZT = 0.02571 + j1.92688*10^-3
ZT = 38.67 -j2.897 (total impedance)
so ZT = [ 38.786 ∠-4.28° ] ohms
b)
parallel combination of R AND X
1/ZT = 1/R1 + 1/jx1 + 1/R2 + 1/(-jx2) + 1/R3 + 1/(-jX3)
1/ZT = 1/23.04 + 1/j28.8 + 1/51.2 + 1/(-j105.74) + 1/19.2 + 1/(-58.48)
1/ZT = 0.1150 - j0.008164
ZT = 8.65 +j0.6141
so ZT = [ 8.673 ∠4.06° ] ohms
Determine the voltage across a 2-μF capacitor if the current through it is i(t) = 3e−6000t mA. Assume that the initial capacitor voltage is zero g
Answer:
[tex]v = 250[1 - {e^{-6000t}}][/tex] mV
Explanation:
The voltage across a capacitor at a time t, is given by:
[tex]v(t) = \frac{1}{C} \int\limits^{t}_{t_0} {i(t)} \, dt + v(t_0)[/tex] ----------------(i)
Where;
v(t) = voltage at time t
[tex]t_{0}[/tex] = initial time
C = capacitance of the capacitor
i(t) = current through the capacitor at time t
v(t₀) = voltage at initial time.
From the question:
C = 2μF = 2 x 10⁻⁶F
i(t) = 3[tex]e^{-6000t}[/tex] mA
t₀ = 0
v(t₀ = 0) = 0
Substitute these values into equation (i) as follows;
[tex]v = \frac{1}{2*10^{-6}} \int\limits^{t}_{0} {3e^{-6000t}} \, dt + v(0)[/tex]
[tex]v = \frac{1}{2*10^{-6}} \int\limits^{t}_{0} {3e^{-6000t}} \, dt + 0[/tex]
[tex]v = \frac{1}{2*10^{-6}} \int\limits^{t}_{0} {3e^{-6000t}} \, dt[/tex]
[tex]v = \frac{3}{2*10^{-6}} \int\limits^{t}_{0} {e^{-6000t}} \, dt[/tex] [Solve the integral]
[tex]v = \frac{3}{2*10^{-6}*(-6000)} {e^{-6000t}}|_0^t[/tex]
[tex]v = \frac{-3000}{12} {e^{-6000t}}|_0^t[/tex]
[tex]v = -250 {e^{-6000t}}|_0^t[/tex]
[tex]v = -250 {e^{-6000t}} - [-250 {e^{-6000(0)}][/tex]
[tex]v = -250 {e^{-6000t}} - [-250][/tex]
[tex]v = -250 {e^{-6000t}} + 250[/tex]
[tex]v = 250 -250 {e^{-6000t}}[/tex]
[tex]v = 250[1 - {e^{-6000t}}][/tex]
Therefore, the voltage across the capacitor is [tex]v = 250[1 - {e^{-6000t}}][/tex] mV
Compute the solution to x +2x +2x =0. For x0 = 0 mm, v0 = 1 mm/s and write down the closed-form expression for the response.
Answer:
The answer is "[tex]\bold{e^{-t} \sin t}[/tex]"
Explanation:
Given equation:
[tex]\to x+2x+2x=0.............(a)[/tex]
Let x= e^{mt} be a solution of the equation will be:
[tex]\to m^2+2m+2=0[/tex]
compare the value with the [tex]am^2+bm+c=0[/tex]
[tex]\to a= 1\\\to b= -2\\\to c= 2\\[/tex]
Formula:
[tex]\bold{=\frac{-b \pm \sqrt{b^2-4ac}}{2a}}\\\\=\frac{-2 \pm \sqrt{(-2)^2-4\times 1 \times 2}}{2 \times 1}\\\\=\frac{-2 \pm \sqrt{4-8}}{2}\\\\=\frac{-2 \pm \sqrt{-4}}{2}\\\\=\frac{-2 \pm 2i}{2}\\\\[/tex]
Calculate the g.s at equation (a):
[tex]\to x = e^{-t} (c_1 \cos t+ c_2 \sin t)............(b)\\\\\to x = e^{-t} (c_2 \cos t -c_1 \sin t) - e^{-t} (c_1 \cos t + c_2\sin t) ...............(c)\\\\[/tex]
[tex]_{when} \\\\\to t= 0\\\\\to x=x_0\\\\\to x= v_0 =1 \\\\ \ then \ form \ equation \ (b) \ and \ equation \ (c)[/tex]
[tex]\to a= 0 \\ \to c_2 -c_1 =1 \\ \to c_2=1[/tex]
The value of [tex]x = e^{-t} ( 0 \times \cos t + 1 \times \sin t)[/tex]
[tex]\boxed{\bold{x = e^{-t} (\sin t)}}[/tex]
Mechanical clips are used to close bags and keep things together. Investigate the design of various paper clips, hair clips, and potato chip bag clips. Choose three (3) different types of clips. Discuss what you think are important design parameters. Discuss the advantages and disadvantages associated with each of the three (3) designs.
Answer:
Hair clip: this used to hold human hairs together especially long hairs
The Design parameters to be considered are : number of teeth, durability of the material to be used and also the width ( how wide the clip can open )
Advantages : very easy to use, holds hairs tight
Disadvantages : Expensive and material used is sometimes brittle
paper clips : This used to hold papers together it is made of a thin elastic wire
The design parameters to be considered are : length of the wire, material to be used and the elasticity of the material
advantages : it is quite cheap and good strength
disadvantages :it can hold a limited amount of papers together
potato chip bag clips: These clips are used on potato chip bags to ensure that the bags are air tight
The design parameters to be considered are : Elasticity of the material to be used , and size
Advantages : it helps to prevent the potato chips from getting exposed to air
disadvantages : Not very popular and its quite expensive
Explanation:
Hair clip: this used to hold human hairs together especially long hairs
The Design parameters to be considered are : number of teeth, durability of the material to be used and also the width ( how wide the clip can open )
Advantages : very easy to use, holds hairs tight
Disadvantages : Expensive and material used is sometimes brittle
paper clips : This used to hold papers together it is made of a thin elastic wire
The design parameters to be considered are : length of the wire, material to be used and the elasticity of the material
advantages : it is quite cheap and good strength
disadvantages :it can hold a limited amount of papers together
potato chip bag clips: These clips are used on potato chip bags to ensure that the bags are air tight
The design parameters to be considered are : Elasticity of the material to be used , and size
Advantages : it helps to prevent the potato chips from getting exposed to air
disadvantages : Not very popular and its quite expensive
When an object is made of the plastic polyester (PET), it uses antimony as a catalyst. After production, antimony can leach into food and drink stored in PET containers. Usually, if stored correctly for a short amount of time, the amount of antimony found in liquids is well below the safety limits. However, there have been reports of as much as 44.7 micrograms per liter [µg/L] of antimony found in fruit juice concentrates. How much antimony, in units of moles [mol], could be found in one gallon [gal] of fruit juice concentrate at this level of contamination? The molecular mass of antimony is 121.76 grams per mole [g/mol].
Answer:
1.39 µmol
Explanation:
(1 gal) × (44.7 µg/L)/(121.76 g/mol)(3.785411784 L/gal) = 1.39 µmol
Three single-phase loads in parallel are supplied from a 1400V (RMS), 60 Hz supply. The loads are as follows: Load 1: Inductive load: 125 kVA, 0.28 power factor Load 2: Capacitive load: 10 kW, 40 kVAR Load 3: Resistive load: 15 kW Find the total kW, kVAR, kVA, and supply power factor. (5 points) Find the capacitive correction (in kVARs) required to improve the power factor to 0.8 and calculate the supply current with this correction in place. (10 points) What is the least current that can service these three loads and how much compensation would it require
Answer:
The answer is below
Explanation:
[tex]\theta_1=cos^{-1}0.28=73.74^o\ lagging\\\\S_1=125\angle 73.74^o=35\ kW+j120\ kVAR\\\\S_2=10\ kW-j40\ kVAR\\\\S_3=15\ kW[/tex]
Total power = P = 35 kW + 10 kW + 15 kW = 60 kW
Total kVAR = 120 kVAR - 40 kVAR = 80 kVAR
[tex]Total\ apparent \ power =S= S_1+S_2+S_3=(35+j120)+(10-j40)+(15)\\\\S=60\ kW+j80\ kVAR=100\angle 53.13^o\\\\Current(I)=\frac{S^*}{V^*} \frac{100000\angle -53.13^o}{1400\angle0}=71.43\angle-53.13^o\\ \\Power\ factor (PF)=cos(53.13)=0.6\ lagging\\\\The \ new\ power\ factor\ is\ to \ be\ 0.8[cos^{-1}0.8=36.87^o], hence\ since\ the\ total\ \\real\ power(P)= 60\ kW, the\ capacitor\ kVAR(Q_c)\ is:\\\\Q_c=60tan(53.13)-60tan(36.87)=80-45=35\ kVAR\\\\[/tex]
[tex]C=\frac{Q_c}{wV^2} =\frac{35000\ VAR}{2\pi*60\ Hz*1400\ V}=47.38\ \mu f[/tex]
New current (I') = [tex]\frac{S'^*}{V^*}=\frac{60000-j45000}{1400}=53.57\angle-36.87^o[/tex]
Current reduce from 71.43 A to 53.57 A
While supporting load P, the maximum contraction permitted in a 4.75-m long pipe column is 7 mm. Given that E =180 GPa for the column, determine the stress in the pipe at the maximum allowable contraction.
Answer:
[tex]\mathbf{stress \ \sigma = 264.6 \ Mpa}[/tex]
Explanation:
From the concept of Hooke's Law,
[tex]E =\dfrac{ stress \ \sigma}{ strain \ \varepsilon}[/tex]
where;
[tex]strain \ \varepsilon = \dfrac{change \ in \ dimension }{original \ dimension}[/tex]
[tex]strain \ \varepsilon = \dfrac{7 \ mm }{4.75 \times 10^{3} \ mm}[/tex]
[tex]strain \ \varepsilon =0.00147368[/tex]
Recall:
[tex]E =\dfrac{ stress \ \sigma}{ strain \ \varepsilon}[/tex]
[tex]stress \ \sigma = E \times { strain \ \varepsilon}[/tex]
[tex]stress \ \sigma = 180 \times 10^{3} \ Mpa \times 0.00147[/tex]
[tex]\mathbf{stress \ \sigma = 264.6 \ Mpa}[/tex]
Thus, the stress in the pipe at the maximum allowable contraction = 264.6 Mpa
what add the most carbon dioxide to the atmosphere
Answer:
Volcanic outgassing
The burning of fossil fuels (coal, oil, gasoline, natural gas), for heating, power generation and transport
Some industrial processes such as cement making.
Explanation:
What are the four categories of engineering materials used in manufacturing?
Answer:
metals, composite, ceramics and polymers.
Explanation:
The four categories of engineering materials used in manufacturing are metals, composite, ceramics and polymers.
i) Metals: Metals are solids made up of atoms held by matrix of electrons. They are good conductors of heat and electricity, ductile and strong.
ii) Composite: This is a combination of two or more materials. They have high strength to weight ratio, stiff, low conductivity. E.g are wood, concrete.
iii) Ceramics: They are inorganic, non-metallic crystalline compounds with high hardness and strength as well as poor conductors of electricity and heat.
iv) Polymers: They have low weight and are poor conductors of electricity and heat
What are the benefits of using the engineering design process
Answer:
Some of the benefits are tangible for they are visible in the design and production process, while the other benefits are intangible which may not be visible directly but result in improvement in the quality of product, better control over designing and production process, reduction of stress on the designers etc.
The Release Train Engineer is a servant leader who displays which two actions or behaviors?
Explanation:
The Release Train Engineer (RTE) has the main work of supporting as well as coaching the Agile Release Train (ART). They are capable of steering ART successfully and to navigate the complexity in delivering the software in large and inter-functional environments.
They serve the scrum master and coach teams to improve on the results.
The two actions or behaviors of the RTE are :
1. They try to create an environment of the mutual influence.
2. Listens and also supports the teams in problem identification as well as decision-making.
The behaviors or actions that the release train engineer does include:
Operating within the lean budget.Facilitating demosThe release train engineer refers to a servant leader who is responsible for facilitating program-level processes and executes them.
The release train engineer is also responsible for driving continuous development, managing risks, and escalating impediments. Some of their actions include operating within the lean budget and facilitating demos.
Read related link on:
https://brainly.com/question/25254146
If you are driving a 30-foot
vehicle at 55 mph, you should
leave how many seconds of
following distance?
Answer:
3 sec
If you are driving a 30-foot vehicle at 55 mph, how many seconds of following distance should you allow? 30ft truck. = 3 sec. Since the truck is over 40 mph.
Explanation:
A 75 ! coaxial transmission line has a length of 2.0 cm and is terminated with a load impedance of 37.5 j75 !. If the relative permittivity of the line is 2.56 and the frequency is 3.0 GHz, find the input impedance to the line, the reflection coefficient at the load, the reflection coefficient at the input, and the SWR on the line
Answer:
4.26
Explanation:
The wavelength λ is given by:
[tex]\lambda=v/f=c/nf\\c=speed\ of\ light=3*10^8m/s,f=frequency=3*10^9Hz,n=permittivity=2.56\\\\\lambda=3*10^8/(2.56*3*10^9)=0.0625\ m\\[/tex]
Phase constant (β) = 2π/λ
βl = 2π/λ × l
l = 2 cm = 0.02 m
βl = 2π/0.0625 × 0.02=2.01 rad = 115.3°
1 rad = 180/π degrees
[tex]Z_L=load\ impedance=37.5+j75\\\\Z_o=characteristic impedance = 75\ ohm\\\\\tilde {Z_L}=Z_L/Z_o=37.5+j75/75=0.5+j[/tex]
[tex]\tilde {Z_{in}}=\frac{\tilde {Z_{L}}+jtan\beta l}{1+j\tilde {Z_{L}}tan\beta l}=\frac{0.5+j+jtan(115.2)}{1+j(0.5+j)tan(115.2)}=0.253-j0.274\\ \\Z_{in}=Z_o\tilde {Z_{in}}=75(0.253-j0.274)=19-j20.5\\\\\Gamma_L=\frac{Z_L-Z_0}{Z_L+Z_o}=\frac{37.5+j75-75}{37.5+j75+75}=0.62\angle 83^o\\\\\Gamma_{in}=\frac{Z_{in}-Z_0}{Z_{in}+Z_o}=\frac{19-j20.5-75}{19-j20.5+75}=0.62\angle -147^o\\\\VSWR=\frac{1+\rho}{1-\rho} =\frac{1+0.62}{1-0.62}=4.26[/tex]
True or False? A constricting nozzle is used
to create, concentrate, and direct the high-
velocity plasma.
Answer:
True
Explanation:
Principles of plasma arc cutting, Uses a constricting nozzle to create, concentrate, and direct the high-velocity plasma. Plasma gas is always used
in plasma arc cutting When shielding gas is also used, the process is called dual flow plasma arc cutting. I hope this helps.
6. You are evaluating flow through an airway. The current flow rate is 10 liters per minute with a fixed driving pressure (P1) of 20 cm H2O and a fixed downstream pressure (P2) of 5 cm H2O. Identify whether each statement is correct or incorrect if we pinch the lumen in the middle of the tube. a. The flow would decrease b. P1 would increase to maintain the flow rate c. The resistance would increase
Answer:
B) P1 would increase to maintain the flow rate ( correct )
C) The resistance would increase (correct )
Explanation:
flow rate = 10 liters per minute
Driving pressure (p1) = 20 cm H20
Fixed downstream pressure (p2) = 5 cm H20
The correct statements when we pinch the Lumen in the middle of the tube would be : P1 would increase to maintain the flow rate and The resistance would increase.this is because when we pinch the Lumen we reduce its diameter and the reduction of its Diameter will result to increased resistance against the flow and resistance of flow is directly proportional to pressure hence P1 would increase as well
The wrong statement would be : The flow would decrease
Identify the characteristics of parallel flow heat exchangers.
a. The hot and cold fluids enter the heat exchanger at opposite ends.
b. The hot and cold fluids move in the opposite direction.
c. The hot and cold fluids move in the same direction.
d. The hot and cold fluids enter the heat exchanger at the same end.
Answer:
A.
Explanation:
Please help I need by today !!
What is the purpose of an engineering notebook ?
What is the purpose of a portfolio?
